Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 611/1834 | < Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >

  • How can I create an external SSL wrapper/tunnel page for an insecure webpage behind a firewall?

    - by Ross Rogers
    I have an security cam with a built-in webpage inside my home network. That camera is using basic HTTP authentication instead of SSL. I want to be able to access the camera's webpage from outside my network, but I don't want to open an unencrypted video stream to the outside world. Right now, I'm doing some cumbersome ssh tunneling where I bounce off an ssh server like: ssh -N -L 9090:CAMERA_IP:80 [email protected] and then I connect to my web page like: http://localhost:9090 But this is a pain. Now, gentle reader, I beseech you to tell me how I can use linux (Ubuntu) to get a fully encrypted SSL connection to my internal web page without the hassle of creating an ssh tunnel each time. I believe I can use stunnel, but I'm not sure of the command.

    Read the article

  • Mounting Samsung Galaxy S2 via USB on Ubuntu 13.04

    - by argvar
    Connecting my Samsung Galaxy S2 to Windows 7 worked seamlessly. Now that I'm on Ubuntu 13.04 I'd like to access my phone's drive via the USB cable, but that's not working. When I do plug it in I get a error message in Ubuntu: Unable to mount SAMSUNG_Android Unable to open MTP device '[usb:002,008]' Then when I unplug it I see a error message on the phone: Attention Unable to find software on your PC that can recognize your device. Service pack 3, Windows Media Player, version 10 or higher, for Windows XP or Android FIle Transfer for Mac OS must be installed. You can download and install PC Kies from http://www.samsung.com/kies in order to sync data with your device, back up data, and upgrade your device (Windows and Mac OS are supported) What can I do here to fix this? I don't want to use any special software with the phone, just access the phone's drive.

    Read the article

  • How do I decrypt WPA2 encrypted packets using Wireshark?

    - by Rox
    I am trying to decrypt my WLAN data with Wireshark. I have already read and tried eveything on this page but without any success (well, I tried the example dump on that page and succeeded, but I fail with my own packets). I caught the four-way handshake from another client connecting to the network. My network info is as follows: SSID: test Passphrase: mypass The above info would give this preshared key: 58af7d7ce2e11faeab2278a5ef45de4944385f319b52a5b2d82389faedd3f9bf In Wireshark in the Preferences--IEEE 802.11 I have set this line as Key 1: wpa-psk:58af7d7ce2e11faeab2278a5ef45de4944385f319b52a5b2d82389faedd3f9bf I have tried the different options of "Ignore the protection bit" but none works. What could I have missed?

    Read the article

  • How to set up port forwarding and firewall settings for torrents using Transmsission on Mac OSX 10.5

    - by Liz
    I have picked up bits of advice here and there on the internet and got someway through this tortuous exercise (after it took 18 hours to download the first torrent I tried yesterday - magnet-link for a film). Where I have got stuck is with configuring the firewall on the Netgear Router but I am not sure if I have caused the problem myself by something else I have done configuring the Mac System Preferences for Security or Networking. I have been following the sections of these instructions that seem to apply, although they are written for a different OSX version (don't know which one, but the screen shots do not match what I see) and I am not wanting to set up my Mac as a server and attending to the parts that apply to port forwarding for Netgear rather than LinkSys: http://homepage.mac.com/car1son/static_port_fwd_intro.html I have been trying to follow these instructions: Instructions for DG834, DG834G, DG824M, FR114W, FM114P, FR114P, FR328S, FVL328, FVS328, FVS338, FVX538, FWAG114, FWG114P, or FVS318v3 These routers do port forwarding by assigning port numbers to a "service" associated with the application you want to run. "Rules" are set for particular services. Rules block or allow access, based on various conditions such as the time of day and the name of the service. To Create a New Inbound or Outbound Rule 1. Submit the router's address in an Internet browser. (The default is 192.168.0.1). 2. Enter the router's username and password. 3. From the main menu, click Security > Rules. 4. Click Add for inbound or outbound traffic, as appropriate to the application you are planning to run. 5. Select the Service. The services the router knows about are listed in the drop down. If the service you want is not listed, add it as described in the next section. 6. Select the Action, for example ALLOW always. 7. For Send to LAN Server, enter the IP address of the local server. Note that this is also the IP address the computers on your LAN will access. 8. For WAN User choose Any, or limit access to particular IP addresses. 9. For Log selection it is reasonable to turn logs on, especially at the beginning when you are unsure of the result of the changes you are making. Later, you may want to set logs to "Never" for performance reasons. 10. Click Apply. As noted in user manual for some models: * Consider using the Dynamic DNS feature on the Advanced menu, so that external users can find your network when the DHCP lease is renewed by your ISP. * If your own LAN server uses DHCP, and your IPs change on rebooting, consider using the Reserved IP Address feature in the LAN IP menu. To Add a Service for These Routers 1. Click Security > Services > Add Custom Service. 2. Enter any name you choose for the service. 3. Select whether the service is to use TCP or UDP. If you are unsure, select both. 4. Enter the lowest port number used by the service. 5. Enter the highest port number used. If the service uses only one port number, enter the same number. 6. Click Apply. There is no "Security - Rules" submenu in the Netgear page, so I have been trying to access "Security - Firewall Rules". I can access everthing else in the Netgear settings as Admin but I cannot get the "Firewall Rules" section to open up. (I am not 100% sure I will know exactly what to do if and when I do get it opened up!) I haven't managed to find though searching the internet any instructions that would seem to apply specifically to what I am trying to achieve, so would be very grateful if someone could either point me in the right direction or give me some advice directly. Best wishes, Liz

    Read the article

  • Flash Webcam non responsive Ubuntu 11.10

    - by powerbuoy
    I've got the same problem as this gentleman: https://answers.launchpad.net/ubuntu/+source/flashplugin-nonfree/+question/176541 Where the webcam settings / access does not work at all / is completely unresponsive in Ubuntu 11.10. I've tried webcam access in Facebook, Google+, my own code + a number of tutorials/demos and none work. What happens is the settings dialogue is completely unresponsive. Clicking tabs or buttons does nothing. In the question linked to a suggested answer is to run Unity 2D. Unfortunately this does not work for me (the exact same thing happens). I've also tried Gnome 3 which also does not work. Note that it is only the webcam settings that don't work. YouTube videos and annoying banners work just fine. Does anyone know of a workaround for this (except going back to 11.04) or if they've fixed this in 12.04? - also, are any of you experiencing the same thing?

    Read the article

  • How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

    - by morgant
    We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

    Read the article

  • Great Blog Comments

    - by Paul Sorensen
    Just a quick note to let you know that in the interest of keeping the most useful content available here on the Oracle Certification Blog, we do moderate the comments. We welcome (and encourage dialog, questions, comments, etc) here on the topics at hand. We'll never 'censor' out a comment just because we don't like it - in fact, this is how we often learn ways in which we can do better. But of course we will filter out the typical list like anyone else: crude/offensive remarks, foul language, reference to illegal activity, etc. We will also often redirect any customer-service type inquiries to [email protected] where they can best be handled.Also, if you have a question of a general nature, please research it on the Oracle Certification website first. We often won't respond to questions asking such as "tell me how to get 11g ocp", as we've already made sure that you have that kind of information available. Now if we've inadvertently 'hidden' something on our site (gulp), then fair enough - please let us know that you're having a hard time finding it and we'll be sure to try and "unbury it" ;-)Additionally, you may have more of an 'opinion' type question, such as "should I do 'x' certification or 'y' certification." For these, we highly recommend checking on the Oracle Technology Network (OTN) Certification Forum, where you can engage in peer-to-peer discussions, share techniques, advice and best practices with others in the field.In the meantime, please continue to share your thoughts, ideas, opinions, tech tips etc - we look forward to seeing them and passing them wherever we can!QUICK LINKS:Oracle Certification WebsiteEmail - Customer ServiceOracle Technology Network (OTN) Certification Forum

    Read the article

  • How can I force Parallels' networking to obtain an IP through a wireless router?

    - by RLH
    Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

    Read the article

  • Windows 7 and XP Networking

    - by David-Zazeski
    I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

    Read the article

  • Debugging IO limitation

    - by Martin F
    I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

    Read the article

  • NAS disk - problem with accessing SAMBA

    - by dominolog
    Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

    Read the article

  • Windows clients not using NTP server provided via DHCP

    - by gencha
    I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows: subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.200; option broadcast-address 10.10.10.255; option routers 10.10.10.1; option ntp-servers 10.10.10.1; } The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.

    Read the article

  • Streaming Flash Video - getting my feet wet

    - by Travis
    I'm working on a project that will involve having a couple thousand short videos online. I haven't done anything with online video before and this is all a bit new to me, so I am looking for some general advice... I would like to use Flowplayer, and I would like to encode the videos as H264s. I am enamoured with Flowplayer's slow motion feature, which if I understand correctly, is only available using a Wowza server. I'm wondering: Is it advisable to use a delivery network of some sort? (Flowplayer seems to have a partnership with HDDN, and recommends them. http://www.hddn.com/) Or would I be better off purchasing Wowza and installing it on our own server? (At first glance, it looks as though signing up with a network like HDDN is much simpler, but perhaps there are problems that come along with this...?) Any tips / warnings of imminent peril would be much appreciated. Thanks in advance.

    Read the article

  • Can't communicate with Primary DNS Server

    - by horsley
    A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

    Read the article

  • What equipment do real ISP's use?

    - by Allanrbo
    In a dormitory of 550 residents, people often mistakenly set up DHCP servers for the whole network by plugging in their private Wi-Fi routers wrongly. Also recently, someone mistakenly configured their PC to a static IP being the same as that of the default gateway. We use cheap 3Com switches at the moment. I know that Cisco switches support DHCP snooping to solve the DHCP problem, but that still does not solve the default gateway IP takeover problem. What sort of switch equipment do real ISP's use so their customers cannot break the network for the other customers?

    Read the article

  • MIX 2010 Covert Operations Day 1

    - by GeekAgilistMercenary
    Portland Departure - Farewell Stumptown Off I go on a plane from Portland, Oregon to Las Vegas, Nevada for the MIX 2010 Conference.  Before I even boarded the plane I met Paul Gomes a Senior Software Engineer and Andrew Saylor the Director of Business Development.  Both of these SoftSource Employees were en route to MIX themselves.  Being stoked to already be bumping into some top tier people, I bid them adieu and headed for my seat on the plane. I boarded, and had before the boarding opted for an upgrade.  I have to advise that if you get a chance on Alaska to upgrade at the last minute, take it.  It is usually only about $50 bucks or so and the additional space makes working on the ole' laptop actually possible (even on my monstrous 17" laptop).  So take it from me, click that upgrade button and fork over that $50 bucks for anything over an hour flight, the comfort and ability to work is usually worth it! Las Vegas Arrival - Welcome to Sin City Got into Las Vegas and swung out of the airport.  I then, with my comrade Beth attempted to get Internet Access for the next 3 hours.  Las Vegas, is not the most friendly Internet Access town.  I will just say it, I am not sure why any Internet related company (ala Microsoft) would hold a conference here.  There are more than a dozen other cities that would be better. But I digress, I did manage to get Internet Access after checking into the Circus Circus.  Don't ask why I ended up staying here, if you run into me in person, ask then because there is a whole story to it. At this point I started checking out each session further on the MIX10 Site.  There are a number I deemed necessary to check out.  However, you'll have to read my pending entries to see which session I jumped into. With this juncture in time reached, I got a ton of work to wrap up, some code to write and some sleep to get.  Until tomorrow, adieu. For more of my writing, thoughts, and other topics check out my other blog, where the original entry is posted.

    Read the article

  • Get Smarter Just By Listening

    - by mark.wilcox
    Occasionally my friends ask me what do I listen/read to keep informed. So I thought I would like to post an update. First - there is an entirely new network being launched by Jason Calacanis called "ThisWeekIn". They have weekly shows on variety of topics including Startups, Android, Twitter, Cloud Computing, Venture Capital and now the iPad. If you want to keep ahead (and really get motivated) - I totally recommend listening to at least This Week in Startups. I also find Cloud Computing helpful. I also like listening to the Android show so that I can see how it's progressing. Because while I love my iPhone/iPad - it's  important to keep the competition in the game up to improve everything. I'm also not opposed to switching to Android if something becomes as nice experience - but so far - my take on Android devices are  - 10 years ago, I would have jumped all over them because of their hackability. But now, I'm in a phase, where I just want these devices to work and most of my creation is in non-programming areas - I find the i* experience better. Second - In terms of general entertaining tech news - I'm a big fan of This Week in Tech. Finally - For a non-geek but very informative show - The Kevin Pollack Show on ThisWeekIn network gets my highest rating. It's basically two-hours of in-depth interview with a wide variety of well-known comedian and movie stars. -- Posted via email from Virtual Identity Dialogue

    Read the article

  • What are the challenges when my enterprise desires to move the processing component of an applicatio

    - by Berkay
    Assume that i have an enterprise accounting application that consists of a front-end interface, a processing tier, and a back-end database. This is an application that contains private business data, and thus is traditionally run in a secure private network environment within the enterprise. What are the challenges that appear when my enterprise desires to move the processing component of this application to a cloud computing data center in order to achieve greater scalability or to reduce IT costs ? Pls note: do i have to make significant changes to my own infrastructure to enable external access to formerly private resources? do i have to modify the application code to handle new network topology ? thanks, if you give your answers in a simple manner, really appreciated.

    Read the article

  • Some sites won't load on Ubuntu/Mint

    - by Or W
    I have a REALLY weird problem with either my network or my OS. Last week I've suddenly had difficulties loading some websites or even more odd some parts of different websites. For example, I could load gmail.com, login and view the list of emails in my inbox but when I clicked one of them it would just time out. Another example is http://www.ynet.co.il, I can view the home page but going into any one of the articles fails (times out). I've tried Chrome, Firefox and Opera, all fail the same way. If I take a URL of a page I cannot load via the browser and try to wget it though the console I get the file just fine. I've formatted my machine (Used to run Ubuntu 13.04) and installed Mint Linux this time, it worked fine for a few days and now, again, having the same exact issues. Important to note that I have other machines connected either directly or via Wi-Fi to the router and they are all working fine (two win7 machines and 1 raspberry pi). Another strange behavior is that I can ftp or ssh to remote machines but cannot send files via ftp (times out) even if I set passive mode ON and when using ssh I can do just about anything but I cannot paste text into the remote machine, for example if I nano a file on the remote machine and try to paste anything from my clipboard it freezes. What I've tried so far: Disable IPv6 on the networking admin (and on firefox disabling ipv6 on the about:config page) Changing the port and the network cable I went to the store and bought a new standalone PCIe network adapter Connected my win7 laptop using the same cable and router port (sites that were not working on my Mint are working just fine on the win7 machine) Loaded Mint from a livecd, got the same result Tried changing the MTU (was 1500, tried 1492) Some observations: When I clear my browser cache and go to facebook.com for example, the homepage loads but I fail to load any profile/group page. If I refresh facebook.com homepage a couple of times it stops and fails to load until I clear my browser cache. I changed the chrome cache folder permissions to 0777 but that did not help. When I run netstat -n I see A LOT of connections that are in 'FIN_WAIT' mode (I'm guessing that's when I try to refresh pages that are not working and timing out), I have no idea what it means or if it helps anyone figure out what's wrong. The sites that are not loading correctly are always that same, they don't vary or anything and they fail to load exactly the same way on all three browsers that I've tried. When I Googled 'Ubuntu some sites not loading' I see a huge amount of complaints just like mine, but none of them that I could find actually says what the problem is or how they fixed it. Technical stuff: netstat -n ps aux netstat -nr

    Read the article

  • Can't enable wireless lan on Fujitsu Siemens A1665G with Ubuntu 11.10 installed

    - by Theo
    I saw my old Notebook yesterday and wanted to make that work again. On Windows XP the wireless worked still fine. Then I installed new Ubuntu 11.10 32bit and I'm sadly not able to make the wireless enabled. [I replaced Win XP entirely] lspci lists following network: 08:0a.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) So after recommendation from this link I installed the b43 firmware module. iwconfig prints the following: wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associatd Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management: off As you can see, my wireless lan adapter is not turned on. sudo iwconfig wlan0 txpower auto Doesn't change anything. Then I tried to make it work with rfkill. rfkill list 0: phy0: Wirless LAN Soft blocked: no Hard blocked: yes sudo rfkill unblock all rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes remains the same. The question is now, how I could enable the hard blocked wireless LAN. There is no hardware switch for wlan integrated. However there is a button to change the state. I always thought this would be software sided, but it seems to make some hardware changes as well... The wireless LED is also not blinking (as it did on windows xp) I reset bios and searched for some settings in there, but it has only a few options and nothing to do with wireless settings, nothing works here.. At last I tried to install the acer hotkeys but I was not able to manage that. I installed the acerhkgui package, but in initializing progress, it was not able to compile acer hotkeys for my machine. There was a message that asm/linkage.h was not found while compiling. Do you have any ideas what I could do to make this hard blocked stuff disabled and my wireless card work? PS: I also tried sudo rm /dev/rfkill and a reboot to reinit that stuff... No success :(

    Read the article

  • SMB super slow within LAN between MAC and PC

    - by asdcasdc
    I have a windows desktop which stores all my movies, songs and pictures. I have a mac laptop which I would like to access these files. I don't want to utilize the FTP or SCP protocol because I don't want them to be downloaded to my mac. I want to access them as if they are a network mounted disk. So I tried using the native SMB protocol (available in Finder - Go - Connect to server). I tried dragging a file and dropping it onto my MAC's desktop. Surprisingly, I am only able to transfer at a very slow rate of about 1mb/s. Assuming network connectivity is not a problem, has anyone experienced incredible slowness with SMB? Are there alternative protocols for me to use in this case between PC and MAC?

    Read the article

  • Lan, vpn on Amazon EC2, how to?

    The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

    Read the article

  • Wireless not detected on an hp Pavilion g6

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • CARP: two machines think they're the master, but only on one interface

    - by Conor McDermottroe
    I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

    Read the article

< Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >