Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 616/693 | < Previous Page | 612 613 614 615 616 617 618 619 620 621 622 623  | Next Page >

• git submodule svn external

  - by Jason

  Let's say I have 3 git repositories, each with a lib and tests folder in the root. All 3 repositories are part of what I want to be a single package, however it is important to me to keep the repositories separate. I am new to git coming from svn, so I have been reading up on submodules and how they differ from svn:externals. In SVN I could have a single lib/vendor/package directory, and inside package I could setup 3 externals pointing to each of my 3 repositories lib directory, renaming it appropriately like lib/vendor/package/a -> repo1/lib lib/vendor/package/b -> repo2/lib lib/vendor/package/c -> repo3/lib but from my understanding this is not possible with git. Am I missing something? Really I'm hoping this can be solved in one of two ways. Someone will point out how to create a 4th git repository which has the other 3 as submodules organized as I have mentioned above (where I can have an a, b, and c folder inside the root) Someone will point out how to set this up using svn:externals in combination with githubs svn support, referencing the lib directory within each git repository (from my understanding this is impossible)

  Read the article

• Zend, slow load, "waiting for response" for 20-80 seconds on local site

  - by Tony C.

  So I have several sites running under the same zend setup. All of the sites run pretty normally except one. Upon loading or reloading this one site, reguardless of which page your on (excluding the 404 page explanation later...) you get a serious pause before any content begins to download. Using firebugs net panel you can see that the first request which is www.(siteaddress).com.local you see a "waiting for response" bar (purple) that is going for anywhere from 20 to sometimes 80+ seconds and this isn't on a dev site, this is on a local site under localhost. What I've managed to figure out so far is that all the pages do this except my 404 page. The reason the 404 page doesn't succumb to this is because it uses a seperate controller (the error controller) and therefore bypasses much of the controller and functions the other parts of the site use. Using exit statements I've manged to figure out that the problem happens somewhere between my post dispatch and my main (top most) controllers Init function. If i exit in the main controllers init the page loads (then exits instantly, no wait). If i do the same in the pre or post dispatch the page waits the 20-80 seconds then exits. Is there a diagram or explanation somewhere or a way for me to find out what events fire inbetween the post dispatch and the main controllers init function? Or does anyone have any clue what might cause this? Any help would be greatly appreciated...

  Read the article

• WCF data services - Limiting related objects returned based on critera

  - by Mike Morley

  I have an object graph consisting of a base employee object, and a set of related message objects. I am able to return the employee objects based on search criteria on the employee properties (eg team) etc. However, if I expand on the messages, I get the full collection of messages back. I would like to be able to either take the top n messages (i.e. restrict to 10 most recent) or ideally use a date range on the message objects to limit how many are brought back. So far I have not been able to figure out a way of doing this: I get an error if I attempt to filter on properties on the message (&$filter=employee/message/StartDate gives an error "No property 'StartDate' exists in type 'System.Data.Objects.DataClasses.EntityCollection`1). Attempting to use Top on the message related object doesn't work either. I have also tried using a WebGet extension that takes a string list of employee IDs. That works until the list gets too long, and then fails due to the URL getting too long (it might be possible to setup a paging mechanism on this approach)... Unfortunately the UI control I am using requires the data to be in a fairly specific hierarchical shape, so I can't easily come at this from starting on the message side and working backwards. Outside of making multiple calls does anyone know of a method to accomplish this with wcf data services? Thanks! M.

  Read the article

• Bootstrap inline button dropdown within <p> jumbotron

  - by C.B.

  Currently I have a jumbotron setup with some paragraph text, and I would like to stick a button dropdown inline with the text. Dropdown button <span class="btn-group"> <button type="button" class="btn btn-default dropdown-toggle" data-toggle="dropdown"> Button... <span class="caret"></span> </button> <ul class="dropdown-menu" role="menu"> <li><a href="#">Opt 1</a></li> <li><a href="#">Opt 2</a></li> </ul> </span> Jumbotron <div class="jumbotron"> <h1>Hello!</h1> <p>Welcome</p> <p>Another paragraph <!-- dropdown is here --> </p> </div> <!-- jumbotron --> If the dropdown is within the <p> tag, it does not "dropdown" (but renders). If it is outside of the <p> tag it functions fine, but I would like it to be inline with the text and need the text to be in the <p> tag to get the style. Any ideas? Things to note -- If I replace the <span> tags with <div> tags, it will work fine within the <p> tags, but won't be inline.

  Read the article

• Is there a way for -webkit-animtion-timing-function to apply to the entire animation instead of each keyframe?

  - by Ken Sykora

  I'm a bit new to animation, so forgive me if I'm missing a huge concept here. I need to animate an arrow that is pointing to a point on a curve, let's just say it's a cubic curve for the sake of this post. The arrow moves along the curve's line, always pointing a few pixels below it. So what I did, is I setup keyframes along the curve's line using CSS3: @-webkit-keyframes ftch { 0% { opacity: 0; left: -10px; bottom: 12px; } 25% { opacity: 0.25; left: 56.5px; bottom: -7px; } 50% { opacity: 0.5; left: 143px; bottom: -20px; } 75% { opacity: 0.75; left: 209.5px; bottom: -24.5px; } 100% { opacity: 1; left: 266px; bottom: -26px; } } However, when I run this animation using -webkit-animation-timing-function: ease-in, it applies that easing to each individual keyframe, which is definitely not what I want. I want the easing to apply to the entire animation. Is there a different way that I should be doing this? Is there some property to apply the easing to the entire sequence rather than each keyframe?

  Read the article

• How do I prevent a branch from being pushed to another branch in BZR?

  - by cabbey

  We use a dev-test-prod branching scheme with bzr 2. I'd like to setup a bzr hook on the prod branch that will reject a push from the test branch. Looking at the bzr docs, this looks doable, but I'm kinda surprised that my searches don't turn up any one having done it, at least not via any of the keywords I've thought to search by. I'm hoping someone has already gotten this working and can share their path to success. My current thought is to use the pre_change_branch_tip hook to check for the presence of a file on the test branch. If it's present, fail the commit. You may ask, why test for a file, why not just test the branch name? Because I actually need to handle the case where our developers have branched their devel branch, pulled in the shared test branch and are now (erroneously) pushing that test branch to production instead of pushing their feature branch to production. And it seems a billion times easier to look for a file in the new branch than to try to interrogate the sending branch's lineage. So has someone done this? seen it done? or do I get to venture out into the uncharted wasteland that is hook development with bzr? :)

  Read the article

• Subversion Partial Export

  - by Jared

  I have somewhat interesting development situation. The client and deployment server are inside a firewall without access to the Subversion server. But the developers are outside the firewall and are able to use the Subversion server. Right now the solution I have worked out is to update my local copy of the code and then pull out the most recently updated files using UnleashIT. The question is how to get just the updated files out of Subversion so that they can be physically transported through the firewall and put on the deployment server. I'm not worried about trying to change the firewall setup or trying to figure out an easier way to get to the Subversion server from inside the firewall. I'm just interested in a way to get a partial export from the repository of the most recently changed files. Are there any other suggestions? Answer found: In addition to the answer I marked as Answer, I've also found the following here to be able to do this from TortoiseSVN: from http://svn.haxx.se/tsvn/archive-2006-08/0051.shtml * select the two revisions * right-click, "compare revisions" * select all files in the list * right-click, choose "export to..."

  Read the article

• Why are controls (null) in awakeFromNib?

  - by fuzzygoat

  This is a follow on from another question regarding why I could not set UIControls in awakeFromNib. The answer to that is that as you can see below the controls are nil in the awakeFromNib, although they are initialised to the correct objects by the time we get to viewDidLoad. I setup the view the same as I always do, should I be doing something different to access them here, the xib(nib) was designed and saved with the current version of Image Builder. CODE: @interface iPhone_TEST_AwakeFromNibViewController : UIViewController { UILabel *myLabel; UIImageView *myView; } @property(nonatomic, retain)IBOutlet UILabel *myLabel; @property(nonatomic, retain)IBOutlet UIImageView *myView; @end . @synthesize myLabel; @synthesize myView; -(void)awakeFromNib { NSLog(@"awakeFromNib ..."); NSLog(@"myLabel: %@", [myLabel class]); NSLog(@"myView : %@", [myView class]); //[myLabel setText:@"AWAKE"]; [super awakeFromNib]; } -(void)viewDidLoad { NSLog(@"viewDidLoad ..."); NSLog(@"myLabel: %@", [myLabel class]); NSLog(@"myView : %@", [myView class]); //[myLabel setText:@"VIEW"]; [super viewDidLoad]; } OUTPUT: awakeFromNib ... myLabel: (null) myView : (null) viewDidLoad ... myLabel: UILabel myLabel: UIImageView Much appreciated ... gary

  Read the article

• Silverlight - WCF Enable Binary Encoding

  - by Villager

  Hello, I have a WCF service that is returning a lot of data. I want to compress that information so I thought that using BinaryEncoding would be appropriate. Currently, I have a binding setup in my web.config as follows: <binding name="myCustomBinding" closeTimeout="00:05:00" openTimeout="00:05:00" receiveTimeout="00:05:00" sendTimeout="00:05:00"> <binaryMessageEncoding /> <httpTransport maxReceivedMessageSize="8388608" maxBufferSize="8388608"> <extendedProtectionPolicy policyEnforcement="Never" /> </httpTransport> </binding> In my ServiceReferences.clientconfig file, I have the following binding settings: <binding name="CustomBinding_MyService"> <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647"> <extendedProtectionPolicy policyEnforcement="Never" /> </httpTransport> </binding> Oddly, this configuration will not work. As soon as I remove the <binaryMessageEncoding /> line from the web.config, everything works fine. My question is, how do I use binary message encoding? Is there something I need to configure in my ServiceReferences.clientconfig? Thank you

  Read the article

• SQL Compact performance on device

  - by Ben M

  My SQL Compact database is very simple, with just three tables and a single index on one of the tables (the table with 200k rows; the other two have less than a hundred each). The first time the .sdf file is used by my Compact Framework application on the target Windows Mobile device, the system hangs for well over a minute while "something" is done to the database: when deployed, the DB is 17 megabytes, and after this first usage, it balloons to 24 megs. All subsequent usage is pretty fast, so I'm assuming there's some sort of initialization / index building going on during this first usage. I'd rather not subject the user to this delay, so I'm wondering what this initialization process is and whether it can be performed before deployment. For now, I've copied the "initialized" database back to my desktop for use in the setup project, but I'd really like to have a better answer / solution. I've tried "full compact / repair" in the VS Database Properties dialog, but this made no difference. Any ideas? For the record, I should add that the database is only read from by the device application -- no modifications are made by that code.

  Read the article

• JSP displaying source code instead of executing

  - by DJStroky

  I'm new to jsp and have ran into some trouble. Initially, the jsp file and associated java classes were built and tested fine on a test Tomcat server. Now, they've been transitioned to another server of what I believe is the same setup (except it's linux now instead of windows). But when the jsp page is accessed the source code is displayed instead of the jsp actually executing. I've googled for a while but received no success. I had thought that this page might solve the problem since there was no reference to the jsp file I was using or even the following snippets in my web.xml file in the WEB-INF folder: <servlet> <servlet-name>jsp</servlet-name> <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class> <init-param> <param-name>logVerbosityLevel</param-name> <param-value>WARNING</param-value> </init-param> <load-on-startup>3</load-on-startup> </servlet> <servlet-mapping> <servlet-name>jsp</servlet-name> <url-pattern>*.jsp</url-pattern> </servlet-mapping> I tried inserting these lines and restarting Tomcat, but no success. Any ideas?

  Read the article

• FileSystemWatcher Work is Done?

  - by Snowy

  I setup a FsWatcher on a local filesystem directory. I only want to know when files are added to the directory so they can be moved to another filesystem. I seem to be able to detect when the first file is in, but actually I want to know when all files from a given copy operation are done. If I used Windows Explorer to copy files from one directory to another, Explorer would tell me that there are n seconds left in the transfer, so while there is some activity for the begin-transfer and end-transfer for each file, it appears that there is something for the begin-transfer and end-transfer for all files. I wonder if there is something similar that I can do just with the .NET Framework. I would like to know when "all" files are in and not just a single file in a "transaction". If there is nothing baked in, maybe I should come up with some kind of waiting/countering in order to only do my activity when a job is "done". Not sure if I'm making 100% sense on this one, please anyone comment. Thanks.

  Read the article

• SEO - Does google+other search engines index links within <noscript> tags?

  - by Joe

  I have setup some dropdown menus allowing users to find pages on my website by selecting options across multiple dropdowns: eg. Color of Car, Year This would generate a link like: mysite.xyz/blue/2010/ The only problem is, because this link is dynamically assembled with Javascript, I've also had to assemble each possible combination from the dropdowns into a list like: <noscript> No javascript enabled? Here are all the links: <a href='mysite.xyz/blue/2009/'>mysite.xyz/blue/2009/</a> <a href='mysite.xyz/blue/2010/'>mysite.xyz/blue/2010/</a> <a href='mysite.xyz/red/2009/'>mysite.xyz/red/2009/</a> <a href='mysite.xyz/red/2010/'>mysite.xyz/red/2010/</a> </noscript> My question is, if I put these in a tag like this, will I be penalized or anything by search engines such as Google? I've already been doing so for some navigational stuff which required offsets etc. However, now I would be listing a whole list of links here too. I want to provide them here, moreso so that google can actually index my pages - but for those without javascript, they can still navigate too. Your thoughts? Also.. even though I have some links that appear to have been indexed, I AM NOT 100% SURE, which is why I'm asking :P

  Read the article

• mysql select update

  - by Tillebeck

  Hi I have read quite a few selcet+update questions in here but cannot understand how to do it. So will have to ask from the beginning. I would like to update a table based on data in another table. Setup is like this: - TABLE a ( int ; string ) ID WORD 1 banana 2 orange 3 apple - TABLE b ( "comma separated" string ; string ) WORDS TEXTAREA 0 banana -> 0,1 0 orange apple apple -> BEST:0,2,3 ELSE 0,2,3,3 0 banana orange apple -> 0,1,2,3 Now I would like to for each word in TABLE a append ",a.ID" to b.WORDS like: SELECT id, word FROM a (for each) -> UPDATE b SET words = CONCAT(words, ',', a.id) WHERE b.textarea like %a.word% Or even better: replace the word found in b.textarea with ",a.id" so it is the b.textarea that ends up beeing a comma separeted string of id's... But I do not know if that is possible.

  Read the article

• Sharing code between two or more rails apps... alternatives to git submodules?

  - by jtgameover

  We have two separate rails_app, foo/ and bar/ (separate for good reason). They both depend on some models, etc. in a common/ folder, currently parallel to foo and bar. Our current svn setup uses svn:externals to share common/. This weekend we wanted to try out git. After much research, it appears that the "kosher" way to solve this is using git submodule. We got that working after separating foo,bar,common into separate repositories, but then realized all the strings attached: Always commit the submodule before committing the parent. Always push the submodule before pushing the parent. Make sure that the submodule's HEAD points to a branch before committing to it. (If you're a bash user, I recommend using git-completion to put the current branch name in your prompt.) Always run 'git submodule update' after switching branches or pulling changes. All these gotchas complicate things further than add,commit,push. We're looking for simpler ways to share common in git. This guy seems to have success using the git subtree extension, but that deviates from standard gitand still doesn't look that simple. Is this the best we can do given our project structure? I don't know enough about rails plugins/engines, but that seems like a possible RoR-ish way to share libraries. Thanks in advance.

  Read the article

• Cross-Application User Authentication

  - by Chris Lieb

  We have a webapp written in .NET that uses NTLM for SSO. We are writing a new webapp in Java that will tightly integrate with the original application. Unfortunately, Java has no support for performing the server portion of NTLM authentication and the only library that I can find requires too much setup to be allowed by IT. To work around this, I came up with a remote authentication scheme to work across applications and would like your opinions on it. It does not need to be extremely secure, but at the same time not easily be broken. User is authenticated into .NET application using NTLM User clicks link that leaves .NET application .NET application generates random number and stores it in the user table along with the user's full username (domain\username) Insecure token is formed as random number:username Insecure token is run through secure cipher (likely AES-256) using pre-shared key stored within the application to produce a secure token The secure token is passed as part of the query string to the Java application The Java application decrypts the secure key using the same pre-shared key stored within its own code to get the insecure token The random number and username are split apart The username is used to retrieve the user's information from the user table and the stored random number is checked against the one pulled from the insecure token If the numbers match, the username is put into the session for the user and they are now authenticated If the numbers do not match, the user is redirected to the .NET application's home page The random number is removed from the database

  Read the article

• Creating multiple instances of a generic database

  - by sagekilla

  Hi all, currently I'm trying to have a setup where a generic database is distributed to students. They would develop an application using this database (Say a shopping cart application), submit their project onto our server, and then it would be graded automatically. These databases are being run in Microsoft SQL Server 2005. We're using user instances to instantiate each database, and multiple requests could be serviced at once. But, the problem is when more than one student submitted a project to be graded, the first database to be instantiated would be the only one and would overwrite all other copies that were currently open. So if stu1 modified his database and stu2 and stu3 had their projects being graded concurrently, at the end of the grading stu1, stu2, and stu3 would have identical DB's at the end. Is there any way I can have multiple independent copies of a generic database, each of which I can load concurrently and modify without having any changes made to any one affecting the others? I did a little reading, and thought it might be possible to do something along the lines of: Student submits project Attach the database with unique db name (specified by student) Do all necessary operations Detach the database I'm unsure if this would fix our problem or be possible, so any help would be much appreciated!

  Read the article

• Can Boost Program_options separate comma separated argument values

  - by lrm

  If my command line is: > prog --mylist=a,b,c Can Boost's program_options be setup to see three distinct argument values for the mylist argument? I have configured program_options as: namespace po = boost::program_options; po::options_description opts("blah") opts.add_options() ("mylist", std::vector<std::string>>()->multitoken, "description"); po::variables_map vm; po::store(po::parse_command_line(argc, argv, opts), vm); po::notify(vm); When I check the value of the mylist argument, I see one value as a,b,c. I'd like to see three distinct values, split on comma. This works fine if I specify the command line as: > prog --mylist=a b c or > prog --mylist=a --mylist=b --mylist=c Is there a way to configure program_options so that it sees a,b,c as three values that should each be inserted into the vector, rather than one? I am using boost 1.41, g++ 4.5.0 20100520, and have enabled c++0x experimental extensions.

  Read the article

• Can the Visual Studio (2010) Command Window handle "external tools" with project/solution relative p

  - by ee

  I have been playing with the Command Window in Visual Studio (View-Other Windows-Command Window). It is great for several mouse-free scenarios. (The autocompleting file "Open" command rocks in a non-trivial solution.) That success got me thinking and experimenting: Possibility 1.1: You can use the Alias commands to create custom commands Possibility 1.2: You can use the Shell command to run arbitrary executables and specify parameters (and pipe the result to the output or command windows) Possibility 2: A previously setup external tool definition (with project-relative path variables) could be run from the command window What I am stuck on is: There doesn't appear to be a way to send parameters to an aliased command (and thus the underlying Shell call) There doesn't appear to be a way to use project/solution relative paths ($SolutionDir/$ProjectDir) on a Shell call Using absolute paths in Shell works, but is fragile and high-maintenance (one alias for each needed use case). Typically you want the command to run against a file relative to your project/solution. It seems you can't run the traditional external tools (Tools-External Tools...) in the command window Ultimately I want the external tool functionality in the command window in some way. Can anyone see a way to do this? Or am I barking up the wrong tree? So my questions: Can an "external tool" of some sort (using relative project/solution path parameters) be used in the Command Window? If yes, How? If no, what might be a suitable alternative?

  Read the article

• MySQL + Joomla + remote c# access

  - by Jimmy

  Hello, I work on a Joomla web site, installed on a MySQL database and running on IIS7. It's all working fine. I now need to add functionality that lets (Joomla-)registered users change some configuration data. Though I haven't done this yet, it looks straightforward enough to do with Joomla. The data is private so all external access will be done through HTTPS. I also need an existing c# program, running on another machine, to read that configuration data. Sure enough, this data access needs to be as fast as possible. The data will be small (and filtered by query), but the latency should be kept to a minimum. A short-term, client-side cache (less than a minute, in case a user updates his configuration data) seems like a good idea. I have done practically zero database/asp programming so far, so what's the best way of doing that last step? Should the c# program access the database 'directly' (using what? LINQ?) or setup some sort of Facade (SOAP?) service? If a service should be used, should it be done through Joomla or with ASP on IIS? Thanks

  Read the article

• Setting UITabBarItem title from UINavigationController?

  - by fuzzygoat

  I have setup a UITabBarController with two tabs, one is a simple UIViewController and the other is a UINavigationController using second UIViewController as its rootController to set up a UITableView. My question is with regard to naming the tabs (i.e. UITabBarItem) For the first tab (simple UIViewController) I have added the following (see below) to the controllers -init method. - (id)init { self = [super init]; if(self) { UITabBarItem *tabBarItem = [self tabBarItem]; [tabBarItem setTitle:@"ONE"]; } return self; } For the other tab I have added (see below) to the second controllers init (rootController). - (id)init { self = [super init]; if(self) { UITabBarItem *tabBarItem = [[self navigationController] tabBarItem]; [tabBarItem setTitle:@"TWO"]; } return self; } Am I setting the second tabBarItem title in the right place as currently it is not showing? EDIT: I can correctly set the UITabBarItem from within the AppDelegate when I first create the controllers, ready for adding to the UITabBarController. But I really wanted to do this in the individual controller -init methods for neatness. // UITabBarController UITabBarController *tempRoot = [[UITabBarController alloc] init]; [self setRootController:tempRoot]; [tempRoot release]; NSMutableArray *tabBarControllers = [[NSMutableArray alloc] init]; // UIViewController ONE MapController *mapController = [[MapController alloc] init]; [tabBarControllers addObject:mapController]; [mapController release]; // UITableView TWO TableController *rootTableController = [[TableController alloc] init]; UINavigationController *tempNavController = [[UINavigationController alloc] initWithRootViewController:rootTableController]; [rootTableController release]; [tabBarControllers addObject:tempNavController]; [tempNavController release]; [rootController setViewControllers:tabBarControllers]; [tabBarControllers release]; [window addSubview:[rootController view]]; [window makeKeyAndVisible];

  Read the article

• PC boot: dl register and drive number

  - by kikou

  I read somewhere in the internet that, before jumping to 0x7c00, the BIOS loads into %dl the "drive number" of the booted device. But what is this "drive number"? Each device attached to the computer is assigned a number by the BIOS? If so, how can I know which number is a given device assigned to? Reading GRUB's source code I found when %dl has bits 0x80 and 0x70 set, it overwrites the whole register with 0x80. Why is that? Here is the code: jmp 3f /* grub-setup may overwrite this jump */ testb $0x80, %dl jz 2f 3: /* Ignore %dl different from 0-0x0f and 0x80-0x8f. */ testb $0x70, %dl jz 1f 2: movb $0x80, %dl 1: By the way. Is there any detailed resource on the boot process of PC's in the web? Specially about what the BIOS does before giving the control to the bootloader and also the standard codes used to communicate with it (like that "drive numer"). I was hoping to write my own bootloader and everything I found is a bit too vague, not technical enough to the point of informing of the exact state of the computer when my bootloader starts to run.

  Read the article

• Can you do this with Hudson?

  - by damian

  I want to create a hudson job, that takes an id as a parameter. And use that id to calculate the svn-repo path. Where I work you have a svn path for every issue that you resolve. And then all the issues are joined into a single svn-path. What I want to do is to run static code analysis on the partial issues. So I think maybe having an Ant build.xml that I use for every issue, then, parametrize the job with the issue id. I have tried to achieve that but the svn path doesn't replace the parameter. I have tried with #issueId, %issueId%, ${issueId} and ${env.issueId} without success. Jump error like: Location 'http://svn-path:8181/svn/devSet/issues/${env.chuid}' does not exist Checking out a fresh workspace because C:\Documents and Settings\dnoseda\.hudson\jobs\test\workspace\${env.chuid} doesn't exist Checking out http://svn-path:8181/svn/devSet/issues/${env.chuid} ERROR: Failed to check out http://svn-path:8181/svn/devSet/issues/${env.chuid} org.tmatesoft.svn.core.SVNException: svn: '/svn/!svn/bc/46190/devSet/issues/$%7Benv.chuid%7D' path not found: 404 Not Found (http://svn-path:8181) at org.tmatesoft.svn.core.internal.wc.SVNErrorManager.error(SVNErrorManager.java:64) at org.tmatesoft.svn.core.internal.wc.SVNErrorManager.error(SVNErrorManager.java:51) at I am think that I can not do what I want. Do you know how I can setup the correct configuration to achieve this matter? Thanks for any help. Edit The section of the configurate job that I want to put this parameter is this: <scm class="hudson.scm.SubversionSCM"> <locations> <hudson.scm.SubversionSCM_-ModuleLocation> <remote>http://svn-path:8181/svn/devSet/issues/${env.issueid}</remote> </hudson.scm.SubversionSCM_-ModuleLocation> </locations>

  Read the article

• Tableview not drilling down

  - by JoshD

  I have a Tableview which is loaded with a dummy list of exercises. I need to drill to a different page. My didSelectRow is being called, but not implementing the method. The app is a tab bar navigation app that loads a UITableView. #import <UIKit/UIKit.h> @interface Schedule : UIViewController <UITableViewDelegate, UITableViewDataSource> { NSArray *mySchedule; } @end #import "Schedule.h" #import "AnotherViewController.h" @implementation Schedule - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{ return mySchedule.count; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{ //create a cell UITableViewCell *cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:@"cell"]; //fill it with contents cell.textLabel.text = [mySchedule objectAtIndex:indexPath.row]; //return it return cell; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath{ AnotherViewController *anotherViewController = [[AnotherViewController alloc] initWithNibName:@"AnotherViewController" bundle:nil]; [self.navigationController pushViewController:anotherViewController animated:YES]; [anotherViewController release]; } /* // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } */ // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { NSString *myFile = [[NSBundle mainBundle] pathForResource:@"exercise" ofType:@"plist"]; mySchedule = [[NSArray alloc] initWithContentsOfFile:myFile]; [super viewDidLoad]; }

  Read the article

• Detect whether or not a specific attribute was valid on the model

  - by Sir Code-A-Lot

  Having created my own validation attribute deriving from System.ComponentModel.DataAnnotations.ValidationAttribute, I wish to be able to detect from my controller, whether or not that specific attribute was valid on the model. My setup: public class MyModel { [Required] [CustomValidation] [SomeOtherValidation] public string SomeProperty { get; set; } } public class CustomValidationAttribute : ValidationAttribute { public override bool IsValid(object value) { // Custom validation logic here } } Now, how do I detect from the controller whether validation of CustomValidationAttribute succeeded or not? I have been looking at the Exception property of ModelError in the ModelState, but I have no way of adding a custom exception to it from my CustomValidationAttribute. Right now I have resorted to checking for a specific error message in the ModelState: public ActionResult PostModel(MyModel model) { if(ModelState.Where(i => i.Value.Errors.Where((e => e.ErrorMessage == CustomValidationAttribute.SharedMessage)).Any()).Any()) DoSomeCustomStuff(); // The rest of the action here } And changed my CustomValidationAttribute to: public class CustomValidationAttribute : ValidationAttribute { public static string SharedMessage = "CustomValidationAttribute error"; public override bool IsValid(object value) { ErrorMessage = SharedMessage; // Custom validation logic here } } I don't like relying on string matching, and this way the ErrorMessage property is kind of misused. What are my options?

  Read the article

< Previous Page | 612 613 614 615 616 617 618 619 620 621 622 623  | Next Page >