Search Results

Search found 23555 results on 943 pages for 'command timeout'.

Page 619/943 | < Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >

• Internet is not working in base machine

  - by surendar

  I have a Ubuntu desktop. I am running a virtual windows machine using virtual box. Few days before Internet is not working in Ubuntu but it is working in the virtual machine. Even the samba shares are also accessible. I don't know why internet is not working in the base machine. I have tried to ping google.com, but it returns Ubuntu@desktop:~$ ping google.com ping: unknown host google.com ifconfig command's output Ubuntu@desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::227:eff:fe1b:862a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38221 errors:0 dropped:0 overruns:0 frame:0 TX packets:28161 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39144616 (39.1 MB) TX bytes:6143919 (6.1 MB) Interrupt:27 Base address:0x2000 eth0:0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:27 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14944 errors:0 dropped:0 overruns:0 frame:0 TX packets:14944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1735451 (1.7 MB) TX bytes:1735451 (1.7 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:c0:00:01 inet addr:192.168.243.1 Bcast:192.168.243.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:77 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:56:c0:00:08 inet addr:172.16.162.1 Bcast:172.16.162.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Reliable alert dialogs from the shell

  - by intuited

  I'd like to have a message pop up in response to various system events, mostly in order to be able to set reminders for myself from a shell session. There are a few ways to do this; zenity seems to be the most polished. However, I've found at least two problems with zenity: Messages do not appear on all workspaces. I tried using the gtk option --screen to control this, but they just appear on the current workspace regardless. So if I am switching workspaces as the message comes up, I will not see it. Messages do not appear above all other windows. Specifically, if I am using guake, a new zenity message will appear below the guake window and I won't be able to see it. I tried a few other apps a while back. Both gmessage and xmessage exhibited problem 1; gmessage also exhibited problem 2. I did find that kalarm, which can be scripted from the command line, worked acceptably, but I'm trying to avoid running the KDE stack if possible, and would prefer something lightweight with zenity's versatility. It seems that it might be possible to arrange for these problems to be resolved by setting the WM_CLASS, but I'm in a bit over my head there. It might also be possible to make modifications to the window after it launches with a script, but again I'm not sure where to look for resources on that.

  Read the article

• Windows 7 Stopped Using hosts file for DNS Resolution

  - by AJ

  I am running Windows 7 Home Premium 64-bit. Starting today, I noticed that DNS resolution is not reading my %SYSTEMROOT%\System32\drivers\etc\hosts file. I say this because I added two new entries to the file and when I run 'nslookup' on the command line, they don't resolve. Further, just trying to resolve 'localhost' results in my primary DNS server being queried. I've read several threads that suggest that the file might have been corrupted and to move it aside and create a new one. I've done that, and no improvement. Is there some sort of registry key that controls the sequence of resources used for DNS resolution (similar to nsswitch.conf on UNIX)? What else could be causing this? Thanks in advance.

  Read the article

• Simple SSH public/private key question

  - by James R.

  I am trying to learn this instead of just following guides so I can recommend proper actions when people do ask (and they do). Here is what I got down. First, generate both key with command such as this: ssh-keygen -b 2048 -t rsa -C comment -f ~/.ssh/id_rsa Then you push the public part of the key into authorized_keys2 file cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys2 (and then chmod it to 600 or similar) And you download the private key to your computer (id_rsa) and feed that in to Putty to be read and authenticate. Are these the correct steps to setting this public/private key authentication for passwordless login to SSH?

  Read the article

• Error mounting: mount exited with exit code 13

  - by Mike Williamson

  I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

  Read the article

• Pen drive cannot be mounted

  - by DUKE

  I get the following message when I insert my pen drive to USB port. I am unable to format it as well. (This pen drive earlier used as a bootable drive for Ubuntu 12.04) I am using Ubuntu 12.04 LTS. lsusb command in the terminal gives the following message: siva@siva:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 004: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 002 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 007: ID 05ac:8281 Apple, Inc. Bus 001 Device 008: ID 0951:1653 Kingston Technology

  Read the article

• Tale of an Encrypted SSIS Package in msdb and a Lost Password

  - by Argenis

    Yesterday a Developer at work asked for a copy of an SSIS package in Production so he could work on it (please, dear Reader – withhold judgment on Source Control – I know!). I logged on to the SSIS instance, and when I went to export the package… Oops. I didn’t have that password. The DBA who uploaded the package to Production is long gone; my fellow DBA had no idea either - and the Devs returned a cricket sound when queried. So I posed the obligatory question on #SQLHelp and a bunch of folks jumped in – some to help and some to make fun of me (thanks, @SQLSoldier @crummel4 @maryarcia and @sqljoe). I tried their suggestions to no avail…even ran some queries to see if I could figure out how to extract the package XML from the system tables in msdb:   SELECT CAST(CAST(p.packagedata AS varbinary(max)) AS varchar(max)) FROM msdb.dbo.sysssispackages p WHERE p.name = 'LePackage'   This just returned a bunch of XML with encrypted data on it:  I knew there was a job in SQL Agent scheduled to execute the package, and when I tried to look at details on the job step I got the following: Not very helpful. The password had to be saved somewhere, but where?? All of a sudden I remembered that there was a system table I hadn’t queried yet: SELECT sjs.command FROM msdb.dbo.sysjobs sj JOIN msdb.dbo.sysjobsteps sjs ON sj.job_id = sjs.job_id WHERE sj.name = 'Run LePackage' The result: “Well, that’s really secure”, I thought to myself. Cheers, -Argenis

  Read the article

• generate correctly a self signed certificate Zimbra

  - by rkmax

  I have a Single mail server with Zimbra 8.0.0 for generate certificate I'm following Generate the cert. ORG=MyOrganization CN=mail.mydomain.com COUNTRY=myCountry CITY=myCity /opt/zimbra/bin/zmcertmgr createcrt -new -days 365 -subject "/C=$COUNTRY/ST=N/A/L=$CITY/O=$ORG/OU=ZCS/CN=$CN" /opt/zimbra/bin/zmcertmgr deploycrt self -allserver su - zimbra "zmcontrol restart" Veririficate with /opt/zimbra/bin/zmcertmgr viewdeployedcrt. i can see the new cert In Chrome go to https://mail.mydomain.com and export the .cer test in a Windows client certutil.exe -addstore root \path\to\exported.cert root "Root Certification Authorities trusted" You can add a root certificate to the root store CertUtil:-addstore command error: 0x8007000d (WIN32: 13) CertUtil: Invalid data. even from chrome i've tried to add the cert without successful results. can anyone help me with this problem?

  Read the article

• What GUI tools are available for which DVCS?

  - by Macneil

  When I worked at Sun, we used a DVC system called Forte SCCS/Teamware, which used the old SCCS file format, but was a true distributed source code revision control system. One nice feature is that it had strong GUI support: You could bringover and putback changes by simply clicking and dragging. It would draw trees/graphs showing how workspaces relate to each other. You also could have a graph view to display a single file's complete history, which might have had several branches and merges. Allowing you to compare any two points. It also had a strong visual merge tool, to let you accept changes from one of two conflicting files. Naturally, many of the current DVCSs have command line support for these operations, but I'm looking for GUI support in order to use this in a lower-level undergraduate course I'll be teaching. I'm not saying the Forte Teamware solution was perfect, but it did seem to be ahead of the curve. Unfortunately, it's not a viable option to use for my class. Question: What support do the current DVCSs have with regards to GUIs? Do any of them work on Windows, and not just Linux? Are they "ready for prime-time" or still works in progress? Are these standalone or built as plug-ins, e.g., for Eclipse? Note: To help keep this discussion focused I'm only interested in GUI tools. And not a meta-discussion if GUI tools should be used in teaching.

  Read the article

• Problem During Installation SQL Server 2005 on Windows 7

  - by mlife

   Yesterday I was trying to install SQL Server 2005 on windows 7. During installation a popup error dialog shown with this message: The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually. Here is the captured screen: But in books online there was no useful information! After some hours googling, I did not found any useful information and at 3 o'clock of midnight, I was scratching my head! Believe it, I attempted to install SQL Server more than 15 times with different manners (with command prompt & parameters and else). Eventually I found the resource of problem, that was "BitDefender Internet Security 2010"! After uninstalling BitDefender Internet Security, I installed SQL Server 2005 and then reinstalled BitDefender. Just that! Problem resolved. Conclusion: After installing a new version of windows and it's requirements (like IIS and language specifications & else), first install the SQL Server and the Visual Studio and then other applications.Hope be helpful.  

  Read the article

• Friday Spotlight: Network Troubleshooting with Oracle Linux

  - by Chris Kawalek

  Happy Friday, everyone! Our Spotlight this week is on a fantastic new article by Oracle's Robert Chase and posted on Oracle Technology Network. The article steps through, with command line examples, several strategies for tracking down network connectivity issues. From the article: "When applications that use network connectivity for communication are not working, the cause is often a mystery. Despite advances in modern operating systems, many users believe there is no way to directly "see" what's going over the wire, and that often leads to confusion and difficulties when something goes wrong. The reality is that you can actually see what's going over the wire, and there are a number of tools built into Oracle Linux for troubleshooting network issues. This article will help solve some of the mystery and make network connectivity a bit more user friendly." I highly recommend checking this article out, it's a good one! Network Troubleshooting with Oracle Linux  We'll see you next week! -Chris 

  Read the article

• How to run boot loader in VMWare?

  - by Asim Haroon

  I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

  Read the article

• A specific user is unable to log in to vsftpd

  - by HackToHell

  I am setting up a new user let his name be ftpguy. He has access to only one directory /var/www/xxx. I have already chowned the directory so that he has write and read privileges. The user is also unable to login via ssh as I have disabled that by changing his shell to /sbin/nologin. Also, in vsftpd config, I have enabled the chroot_local_user. Now whenever I log in from ftp, i get an auth error. Connect socket #1008 to xxxxxxxx, port 21... 220 Welcome to blah FTP service. USER ftpguy 331 Please specify the password. PASS ********** 530 Login incorrect. I changed the password to something different several times, using the passwd command, nothing happens, i still the above error. However I am able to log in with my ssh creditals to my ftp server without any problems.(I do not use a key).

  Read the article

• View all users in a specific group in CentOS

  - by slayernoah

  I added a user user01 to a group group01 using: usermod -a -G group01 user01 When I run in command id user01 it shows that this user has actually been added to the group. However, the file /etc/group doesn't reflect this. i.e. I believe that on this file, users that belong to each of the groups should be listed next to it. Please correct me if I am wrong. This is a fresh installation of CentOS 6.4 Also, since id user01 shows that this is updated, is there any way to check all the members of group group01?

  Read the article

• "sed" regex help: Replacing characters

  - by powerbar

  I want to change characters in a XML file by using sed. The input looks like this: <!-- Input --> <root> <tree foo="abcd" bar="abccdcd" /> <dontTouch foo="asd" bar="abc" /> </root> Now I want to change all c to X in the bar tag of the tree element. <!-- Output --> <root> <tree foo="abcd" bar="abXXdXd" /> <dontTouch foo="asd" bar="abc" /> </root> How is the correct sed command? Please consider, there can be more than one occurence of c (next to each other or not) in one tag... I tried this myself, but it won't change multiple c, and it does append a X :( sed -i 's/\(<tree.*bar=\".*\)c\(.*\"\/>\)/\1X\2/g' Input.xml

  Read the article

• Editing sudoers file to restrict a user's commands

  - by devin

  Is it possible to edit the sudoers file so a user can use sudo for any command except for a specified one? I reverse is true, I believe, that the sudoers file can be setup so that a user can only execute a given list of commands. EDIT: the commands I really want to take away are halt and reboot... this makes me think there are special system calls for halt and reboot. Can you take system calls away from a user? If not, is it because the unix permission system abstracts over system calls neglecting this?

  Read the article

• convert .p7b key to a .pfx

  - by DrStalker

  I have an SSL certificate in .p7b format that I need to convert to .pfx. If I try this through the windows certificate managment the option to expert as a .pfx is disabled. Trying with openssl I have found the following two commands to do the conversion: openssl pkcs7 -print_certs -in certificate.p7b -out certificate.cer openssl pkcs12 -export -in certificate.cer -inkey privateKey.key -out certificate.pfx -certfile CACert.cer but I'm not sure what key to use for teh esecond command, or what certificate CACert.cer refers to. How can I convert this key to .pfx format?

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• Getting my IP off the hotmail blacklist

  - by Kai

  I got a new server with a new IP address. Apparently this IP is listed in the hotmail blacklists so that I can't send mails to hotmail users out of my webapplication. postfix/smtp[24706]: 8F31C9404B: to=<[email protected]>, relay=mx3.hotmail.com[65.55.37.88]:25, delay=0.66, delays=0.01/0/0.48/0.16, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.37.88] said: 550 SC-001 Unfortunately, messages from 78.47.228.xxx weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) My hoster will not help me get that address removed from the blacklist. So I tried to find a way to do it on my own, but I can't find a way to ask Microsoft to remove my IP from that list. Has anyone managed to remove a falsely listed address? And if yes: how?

  Read the article

• Fonts look worse after ATI proprietary driver install

  - by Utkonos

  I've installed the (almost) current version of the Catalyst 12.4 proprietary driver (8.960). I used the version that is in precise's restricted repository with the following command: sudo apt-get install fglrx fglrx-amdcccle After the install, I am encountering the following two problems: The splash screens for Kubuntu look crooked like they're the wrong resolution (not a big deal; who really cares). All the fonts are lighter, more pixelated (very annoying). This is what it looks like with the open source driver included in 12.04: http://imgur.com/1DxRj And this is what it looks like with the Catalyst driver: http://imgur.com/x6BpP I realize that it is hard to tell the difference with these two screen captures, but it really is quite different and annoying on my monitor. With the open source drivers the fonts look solid and clean the way they are supposed to. With the proprietary drivers the fonts looks fuzzier and more harsh. The only reason I need to use the proprietary driver is to play Minecraft. It does not run under the open source driver, unfortunately. What can I do to fix the fonts and get the proprietary driver to work as well as the open source driver?

  Read the article

• How do I enable SELinux when booting from a CD/DVD?

  - by JeffG

  I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all the kernel modules to my ramdisk, and have tried both selinux=1 and selinux 1 as Kernel boot parameters. After the system boots, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled /var/log/messages does not hold any clues. /proc/kmsg also has nothing

  Read the article

• How to assign permissions to ApplicationPoolIdentity account

  - by Triynko

  In IIS 7 on Windows Server 2008, application pools can be run as the "ApplicationPoolIdentity" account instead of the NetworkService account. How do I assign permissions to this "ApplicationPoolIdentity" account. It does not appear as a local user on the machine. It does not appear as a group anywhere. Nothing remotely like it appears anywhere. When I browse for local users, groups, and built-in accounts, it does not appear in the list, nor does anything similar appear in the list. What is going on? I'm not the only one with this problem: see Trouble with ApplicationPoolIdentity in IIS 7.5 + Windows 7 for an example. "This is unfortunately a limitation of the object picker on Windows Server 2008/Windows Vista - as several people have discovered it already, you can still manipulate the ACL for the app-pool identity using command line tools like icacls."

  Read the article

• ignore ipv6 router advertisements for static addresses with bonded interfaces

  - by boran

  I need to attribute static IPv6 addresses (not use autoconfigured addresses, and ignore router advertisements). This can be done as follows for a standard interface like eth0 iface eth0 inet6 static address myprefix:mysubnet::myip gateway myprefix:mysubnet::mygatewayip netmask 64 pre-up /sbin/sysctl -q -w net.ipv6.conf.$IFACE.autoconf=0 pre-up /sbin/sysctl -q -w net.ipv6.conf.$IFACE.accept_ra=0 However, how can this be done for bonded interfaces? using the "all" interface does not work. Systems is Ubuntu 10.04, 2.6.24-24-server. If one uses the above sysctl command for the bond0, the networking hangs on boot, because /proc/sys/net/ipv6/conf/bond0 does not yet exist and cannot be written to. One the system has booted /proc/sys/net/ipv6/conf/bond0 exist, so one solution after booting is to add the following to /etc/rc.local: /sbin/sysctl -q -w net.ipv6.conf.bond0.autoconf=0 /sbin/sysctl -q -w net.ipv6.conf.bond0.accept_ra=0 /etc/init.d/networking restart and this has the desired effect, the autoconfig v6 address disappears. Seems like a bit of a hack though, are there better solutions?

  Read the article

• JRockit R28 "Ropsten" released

  - by tomas.nilsson

  R28 is a major release (as indicated by the careless omissions of "minor" and "revision" numbers. The formal name would be R28.0.0). Our customers expect grand new features and innovation from major releases, and "Ropsten" will not disappoint. One of the biggest challenges for IT systems is after the fact diagnostics. That is - Once something has gone wrong, the act of trying to figure out why it went wrong. Monitoring a system and keeping track of system health once it is running is considered a hard problem (one that we to some extent help our customers solve already with JRockit Mission Control), but doing it after something occurred is close to impossible. The most common solution is to set up heavy logging (and sacrificing system performance to do the logging) and hope that the problem occurs again. No one really thinks that this is a good solution, but it's the best there is. Until now. Inspired by the "Black box" in airplanes, JRockit R28 introduces the Flight Recorder. Flight Recorder can be seen as an extremely detailed log, but one that is always on and that comes without a cost to system performance. With JRockit Flight Recorder the customer will be able to get diagnostics information about what happened _before_ a problem occurred, instead of trying to guess by looking at the fallout. Keywords that are important to the customer are: • Extremely detailed, always on, diagnostics information • No performance overhead • Powerful tooling to visualize the data recorded. • Enables diagnostics of bugs and SLA breaches after the fact. For followers of JRockit, other additions are: • New JMX agent that allows JRMC to be used through firewalls more easily • Option to generate HPROF dumps, compatible with tools like Eclipse MAT • Up to 64 BG compressed references (previously 4) • View memory allocation on a thread level (as an Mbean and in Mission Control) • Native memory tracking (Command line and Mbean) • More robust optimizer. • Dropping support for Java 1.4.2 and Itanium If you have any further questions, please email [email protected]. The release can be downloaded from http://www.oracle.com/technology/software/products/jrockit/index.html

  Read the article

• Problems with mounting .ISO files

  - by user89599

  I'm using Precise, with GNOME. I've attempted to install some retro, multi-cd games (KOTOR1) via .ISO images and WINE, but I can't get the ISO's to mount correctly. First I tried GMountISO, which showed a read-only warning but worked - until I went to unmount. When the installation program asked for CD 2 I couldn't unmount from the /cdrom folder because neither GMountISO or umount from terminal could detect the mount. After a reboot, I changed to GISOMount (different somehow, I guess?), but when I attempt to mount the ISO I get an error window explaining the syntax of the mount command and, which is also what I get when I attempt to use mount from terminal. After checking /media from terminal on a lark I see the disc mounted there twice over, but umount won't recognize it, even when I specify the full path sudo umount /media/KOTOR_1.iso. It cleared up upon reboot. Can someone please assist? UPDATE :: Thanks for the quick response. What's weird, is the images are like stuck in limbo... I'll show you: sc@sc-HP-110-3700:/media$ ls cdrom KOTOR_1(0)(vcd) KOTOR_1(vcd) sc@sc-HP-110-3700:/media$ cd cdrom sc@sc-HP-110-3700:/media/cdrom$ ls sc@sc-HP-110-3700:/media/cdrom$ cd .. sc@sc-HP-110-3700:/media$ umount KOTOR_1(vcd) bash: syntax error near unexpected token `(' sc@sc-HP-110-3700:/media$ umount KOTOR_1.ISO umount: KOTOR_1.ISO is not mounted (according to mtab) sc@sc-HP-110-3700:/media$ sudo umount -a umount: /run/shm: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /run: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /dev: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) sc@sc-HP-110-3700:/media$

  Read the article

< Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >