Search Results

Search found 254039 results on 10162 pages for 'overflow auto'.

Page 62/10162 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Linux VLAN Bridge

    - by raspi
    I have home network with VLANs, one for LAN, one for WLAN and one for internet. I'd like to use bridging so that instead of configuring these same VLANs to every machine, they had own VLAN ID and bridges were LAN, WLAN and internet. I've tried it but for some reason keep-alive/ttl seems to get broken because SSH sessions etc suddenly disconnects. We have this same setup working in workplace for 4+ years with 100+ customers but it's custom firewall/router hardware so accessing it is impossible. I know that it runs Linux. So what is Debian/Ubuntu default network settings doing wrong or is it just NIC driver/hw problem? I've tried to mess araund with ttl etc settings without any luck. The bad stuff is happening in the bridge because current VLAN-only setup works fine. interfaces: auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 allow-hotplug eth1 iface eth0 inet static iface eth1 inet static auto vlan111 auto vlan222 auto vlan333 auto vlan444 auto br0 auto br1 auto br2 # LAN iface vlan111 inet static vlan_raw_device eth0 # WLAN iface vlan222 inet static vlan_raw_device eth0 # ADSL Modem iface vlan333 inet static vlan_raw_device eth1 # Internet iface vlan444 inet static vlan_raw_device eth0 # LAN bridge iface br0 inet static address 192.168.0.1 netmask 255.255.255.0 bridge_ports eth0.111 bridge_stp on # Internet bridge iface br1 inet static address x.x.x.x netmask x.x.x.x gateway x.x.x.x bridge_ports eth1.333 eth0.444 bridge_stp on post-up iptables -t nat -A POSTROUTING -o br1 -j MASQUERADE pre-down iptables -t nat -D POSTROUTING -o br1 -j MASQUERADE # WLAN bridge iface br2 inet static address 192.168.1.1 netmask 255.255.255.0 bridge_ports eth0.222 bridge_stp on Sysctl: net.ipv4.conf.default.forwarding=1

    Read the article

  • Could it be that "chkrootkit" just doesn't like .hmac, .packlist, and .relocation-tag files?

    - by Danijel
    I just cleaned up my hacked CentOS server (due to not updating since versino 5.3). But still, "chkrootkit" says this: Possible t0rn v8 \(or variation\) rootkit installed /usr/lib/.libfipscheck.so.1.1.0.hmac /usr/lib/.libgcrypt.so.11.hmac /usr/lib/.libfipscheck.so.1.hmac /lib/.libcrypto.so.0.9.8e.hmac /lib/.libssl.so.0.9.8e.hmac /lib/.libssl.so.6.hmac /lib/.libcrypto.so.6.hmac /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/Text/Iconv/.packlist /usr/lib/perl5/5.8.8/i386-linux-thread-multi/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/HTML-Tree/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/Font/AFM/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/MLDBM/Sync/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/MLDBM/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/FreezeThaw/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/Apache/ASP/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/HTML-Format/.packlist /usr/lib/gtk-2.0/immodules/.relocation-tag /usr/lib/python2.4/plat-linux2/.relocation-tag /usr/lib/python2.4/distutils/.relocation-tag /usr/lib/python2.4/config/.relocation-tag Could it be that "chkrootkit" just doesn't like .hmac, .packlist, and .relocation-tag files? Are these realy still infected?

    Read the article

  • In Jetty, can NCSARequestLog be configured to auto-detect the time zone?

    - by David Moles
    It looks as though in 2003 or so NCSARequestLog would pick up the system time zone using TimeZone.getDefault().getID(), but in more recent versions it seems as though it's hard-coded to GMT, unless you override it in jetty.xml or programmatically. If true, this kind of annoying, since it means if you don't want GMT logging you have to edit jetty.xml for every installation (not to mention twice a year for daylight saving time). Is there a workaround that will let Jetty pick the time zone up from the system? (X-posted to Stack Overflow.)

    Read the article

  • Facebook android app keeps crashing even though there are no errors in my code. Why?

    - by user1554479
    If you import the facebook SDK library, the code works (ignore the deprecated methods for now lol) and there are no errors or warnings. However, when I run my facebook app on my Android 2.2 or 4.2 emulator, the app crashes either upon opening or after the log on screen. Why? Is it because I'm not implementing Async Task? If so, how does that work? Here's my code: package com.sara.facebookappl; import java.io.IOException; import java.net.MalformedURLException; import java.net.URL; import org.json.JSONException; import org.json.JSONObject; import android.app.Activity; import android.content.Intent; import android.content.SharedPreferences; import android.content.SharedPreferences.Editor; import android.os.Bundle; import android.os.StrictMode; import android.view.Menu; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.ImageView; import android.widget.TextView; import android.widget.Toast; import com.facebook.android.DialogError; import com.facebook.android.Facebook; import com.facebook.android.Facebook.DialogListener; import com.facebook.android.FacebookError; import com.facebook.android.Util; public class MainActivity extends Activity implements OnClickListener, DialogListener { Facebook fb; ImageView button; SharedPreferences sp; TextView welcome; Button post; @SuppressWarnings("deprecation") @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); post=(Button)findViewById(R.id.button1); String APP_ID = getString(R.string.APP_ID); fb= new Facebook(APP_ID); sp =getPreferences(MODE_PRIVATE); String access_token=sp.getString("access_token", null); long expires=sp.getLong("access_expires", 0); if (access_token !=null) { fb.setAccessToken(access_token); } if(expires !=0) { fb.setAccessExpires(expires); } button=(ImageView)findViewById(R.id.login); button.setOnClickListener((OnClickListener) this); updateButtonImage(); } @SuppressWarnings("deprecation") private void updateButtonImage() { // TODO Auto-generated method stub post.setVisibility(Button.VISIBLE); button.setImageResource(R.drawable.com_facebook_loginbutton_blue); //logout button if (fb.isSessionValid()) { button.setImageResource(R.drawable.com_facebook_loginbutton_blue); // ^logout button JSONObject obj=null; URL img_url =null; try { String jsonUser= fb.request("me"); obj = Util.parseJson(jsonUser); String id=obj.optString("id"); String name = obj.optString("name"); welcome.setText("Welcome, " + name); }catch(FacebookError e) { e.printStackTrace(); }catch (JSONException e) { e.printStackTrace(); }catch (MalformedURLException e) { e.printStackTrace(); }catch (IOException e) { e.printStackTrace(); } }else { post.setVisibility(Button.VISIBLE); button.setImageResource(R.drawable.com_facebook_loginbutton_blue); } } @SuppressWarnings("deprecation") public void buttonClicks(View v) { switch (v.getId()) { case R.id.button1: //post Bundle params= new Bundle(); params.putString("name", "User X"); params.putString("caption", "Rating"); params.putString("description", "User X Rated"); params.putString("link", "http://..."); fb.dialog(MainActivity.this, "feed", params, new Facebook.DialogListener() { @Override public void onFacebookError(FacebookError e) { // TODO Auto-generated method stub } @Override public void onError(DialogError e) { // TODO Auto-generated method stub } @Override public void onComplete(Bundle values) { // TODO Auto-generated method stub } @Override public void onCancel() { // TODO Auto-generated method stub } }); break; } } @SuppressWarnings("deprecation") public void onClick(View v) { if(fb.isSessionValid()) { try { fb.logout(getApplicationContext()); updateButtonImage(); //button will close our our session }catch(MalformedURLException e) { e.printStackTrace(); } catch(IOException e) { e.printStackTrace(); } }else{ //login into facebook fb.authorize(MainActivity.this, new String[] {"email"}, new Facebook.DialogListener() { @Override public void onFacebookError(FacebookError e) { // TODO Auto-generated method stub Toast.makeText(MainActivity.this, "fbError", Toast.LENGTH_SHORT).show(); } @Override public void onError(DialogError e) { // TODO Auto-generated method stub Toast.makeText(MainActivity.this, "onError", Toast.LENGTH_SHORT).show(); } @Override public void onComplete(Bundle values) { // TODO Auto-generated method stub Editor editor=sp.edit(); editor.putString("access_token", fb.getAccessToken()); editor.putLong("access_expires", fb.getAccessExpires()); editor.commit(); updateButtonImage(); } @Override public void onCancel() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this, "onCancel", Toast.LENGTH_SHORT).show(); } }); } } @Override public boolean onCreateOptionsMenu(Menu menu) { // Inflate the menu; this adds items to the action bar if it is present. getMenuInflater().inflate(R.menu.activity_main, menu); return true; } @SuppressWarnings("deprecation") @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { super.onActivityResult(requestCode, resultCode, data); fb.authorizeCallback(requestCode, resultCode, data); } @Override public void onComplete(Bundle values) { // TODO Auto-generated method stub } @Override public void onFacebookError(FacebookError e) { // TODO Auto-generated method stub } @Override public void onError(DialogError e) { // TODO Auto-generated method stub } @Override public void onCancel() { // TODO Auto-generated method stub } } LogCat Errors: 12-16 04:56:59.070: E/AndroidRuntime(822): FATAL EXCEPTION: main 12-16 04:56:59.070: E/AndroidRuntime(822): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.sara.facebookappl/com.sara.facebookappl.MainActivity}: android.os.NetworkOnMainThreadException 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2180) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2230) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.ActivityThread.access$600(ActivityThread.java:141) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1234) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.os.Handler.dispatchMessage(Handler.java:99) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.os.Looper.loop(Looper.java:137) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.ActivityThread.main(ActivityThread.java:5039) 12-16 04:56:59.070: E/AndroidRuntime(822): at java.lang.reflect.Method.invokeNative(Native Method) 12-16 04:56:59.070: E/AndroidRuntime(822): at java.lang.reflect.Method.invoke(Method.java:511) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:793) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:560) 12-16 04:56:59.070: E/AndroidRuntime(822): at dalvik.system.NativeStart.main(Native Method) 12-16 04:56:59.070: E/AndroidRuntime(822): Caused by: android.os.NetworkOnMainThreadException 12-16 04:56:59.070: E/AndroidRuntime(822): at android.os.StrictMode$AndroidBlockGuardPolicy.onNetwork(StrictMode.java:1117) 12-16 04:56:59.070: E/AndroidRuntime(822): at java.net.InetAddress.lookupHostByName(InetAddress.java:385) 12-16 04:56:59.070: E/AndroidRuntime(822): at java.net.InetAddress.getAllByNameImpl(InetAddress.java:236) 12-16 04:56:59.070: E/AndroidRuntime(822): at java.net.InetAddress.getAllByName(InetAddress.java:214) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpConnection.(HttpConnection.java:70) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpConnection.(HttpConnection.java:50) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpConnection$Address.connect(HttpConnection.java:340) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpConnectionPool.get(HttpConnectionPool.java:87) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpConnection.connect(HttpConnection.java:128) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpEngine.openSocketConnection(HttpEngine.java:316) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpsURLConnectionImpl$HttpsEngine.makeSslConnection(HttpsURLConnectionImpl.java:461) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpsURLConnectionImpl$HttpsEngine.connect(HttpsURLConnectionImpl.java:433) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpEngine.sendSocketRequest(HttpEngine.java:290) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpEngine.sendRequest(HttpEngine.java:240) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpURLConnectionImpl.getResponse(HttpURLConnectionImpl.java:282) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpURLConnectionImpl.getInputStream(HttpURLConnectionImpl.java:177) 12-16 04:56:59.070: E/AndroidRuntime(822): at libcore.net.http.HttpsURLConnectionImpl.getInputStream(HttpsURLConnectionImpl.java:271) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.facebook.android.Util.openUrl(Util.java:219) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.facebook.android.Facebook.requestImpl(Facebook.java:806) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.facebook.android.Facebook.request(Facebook.java:732) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.sara.facebookappl.MainActivity.updateButtonImage(MainActivity.java:83) 12-16 04:56:59.070: E/AndroidRuntime(822): at com.sara.facebookappl.MainActivity.onCreate(MainActivity.java:63) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.Activity.performCreate(Activity.java:5104) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1080) 12-16 04:56:59.070: E/AndroidRuntime(822): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2144) 12-16 04:56:59.070: E/AndroidRuntime(822): ... 11 more 12-16 04:56:59.090: D/dalvikvm(822): GC_CONCURRENT freed 150K, 9% free 2723K/2988K, paused 7ms+58ms, total 239ms

    Read the article

  • Can I set auto-width on an Open XML SDK-generated spreadsheet without calculating the individual wid

    - by ccornet
    I'm working on creating an Excel file from a large set of data by using the Open XML SDK. I've finally managed to get a functional Columns node, which specifies all of the columns which will actually be used in the file. There is a "BestFit" property that can be set to true, but this apparently does not do anything. Is there a way to automatically set these columns to "best fit", so that when someone opens this file, they're already sized to the correct amount? Or am I forced to calculate how wide each column should be in advance, and set this in the code?

    Read the article

  • WPF: How to set column width with auto fill in ListView with custom user control.

    - by powerk
    A ListView with Datatemplate in GridViewColumn: <ListView Name ="LogDataList" IsSynchronizedWithCurrentItem="True" ItemsSource="{Binding LogDataCollection}" Background="Cyan"> <ListView.View> <GridView AllowsColumnReorder="true" ColumnHeaderToolTip="Event Log Information"> <GridViewColumn Header="Event Log Name" Width="100"> <GridViewColumn.CellTemplate> <DataTemplate> <l:MyTextBlock Height="25" DataContext="{Binding LogName, Converter={StaticResource DataFieldConverter}}" HighlightMatchCase="{Binding Element}" Loaded="EditBox_Loaded"/> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> ... </GridView> </ListView.View> </ListView> I have no idea about how to make column width autofill although I have tried a lot of way to walk up. The general idea for demo is : <ListView Name ="LogDataList" IsSynchronizedWithCurrentItem="True" ItemsSource="{Binding LogDataCollection}" Background="Cyan"> <ListView.Resources> <Style x:Key="ColumnWidthStyle" TargetType="{x:Null GridViewColumn}"> <Style.Setters> <Setter Property="HorizontalContentAlignment" Value="Stretch" > </Setter> </Style.Setters> </Style> </ListView.Resources> <ListView.View> <GridView AllowsColumnReorder="true" ColumnHeaderToolTip="Event Log Information"> <GridViewColumn Header="Event Log Name" DisplayMemberBinding="{Binding Path=LogName}" HeaderContainerStyle="{StaticResource ColumnWidthStyle}"> It works, but not accord with my demand. I need to customize datatemplate with my custom user control(MyTextBlock) since the enhancement(HighlighMatchCase property) and binding datacontext. How can I set up ColumnWidthMode with Fill in the word? On-line'in. I really appreciate your help.

    Read the article

  • is there any easy way to auto generated code like this?

    - by Kevin Yang
    i have a file which will be used across many app projects. the only difference of these files is the webserice referrence name. code like this: public void Test(){ Kevin.ServiceReference1.Service1Client client = new Kevin.ServiceReference1.Service1Client(); // do something.... } like code above, the 'Kevin.ServiceReference1' will be replace by specified app project namespace. so, according to DRY(dont repeat yourself), i shouldn't just copy the file to many projects and rename the specified part manually. is there any way i can easily replace some parts of my template file to something related to the project?

    Read the article

  • How to stop Quicktime movie in web page from auto loading?

    - by Liam
    I have two quicktime movie files embedded in one web page. I have set autoplay="false" to prevent them both from playing at the same time, but they still load at the same time. Can I prevent them from loading until the user clicks the play button? autohref="false" is supposed to do this but it does not seem to work. Apple's documentation for the EMBED element

    Read the article

  • How to do custom display and auto-select in django admin multi-select field?

    - by rsp
    I'm new to django, so please feel free to tell me if I'm doing this incorrectly. I am trying to create a django ordering system. My order model: class Order(models.Model): ordered_by = models.ForeignKey(User, limit_choices_to = {'groups__name': "Managers", 'is_active': 1}) in my admin ANY user can enter an order, but ordered_by must be someone in the group "managers" (this is the behavior I want). Now, if the logged in user happens to be a manager I want it to automatically fill in the field with that logged in user. I have accomplished this by: class OrderAdmin(admin.ModelAdmin): def formfield_for_foreignkey(self, db_field, request, **kwargs): if db_field.name == "ordered_by": if request.user in User.objects.filter(groups__name='Managers', is_active=1): kwargs["initial"] = request.user.id kwargs["empty_label"] = "-------------" return db_field.formfield(**kwargs) return super(OrderAdmin, self).formfield_for_foreignkey(db_field, request, **kwargs) This also works, but the admin puts the username as the display for the select box by default. It would be nice to have the user's real name listed. I was able to do it with this: class UserModelMultipleChoiceField(forms.ModelMultipleChoiceField): def label_from_instance(self, obj): return obj.first_name + " " + obj.last_name class OrderForm(forms.ModelForm): ordered_by = UserModelChoiceField(queryset=User.objects.all().filter(groups__name='Managers', is_active=1)) class OrderAdmin(admin.ModelAdmin): form = OrderForm My problem: I can't to both of these. If I put in the formfield_for_foreignkey function and add form = OrderForm to use my custom "UserModelChoiceField", it puts the nice name display but it won't select the currently logged in user. I'm new to this, but my guess is that when I use UserModelChoiceField it "erases" the info passed in via formfield_for_foreignkey. Do I need to use the super() function somehow to pass on this info? or something completely different?

    Read the article

  • Auto switching databases from a rails app gracefully from the ApplicationController?

    - by Zaqintosh
    I've seen this post a few times, but haven't really found the answer to this specific question. I'd like to run a rails application that based on the detected request.host (imagine I have two subdomains points to the same rails app and server ip address: myapp1.domain.com and myapp2.domain.com). I'm trying to have myapp1 use the default "production" database, and myapp2 requests always use the alternative remote database. Here is an example of what I tried to do in Application controller that did not work: class ApplicationController < ActionController::Base helper :all before_filter :use_alternate_db private def use_alternate_db if request.host == 'myapp1.domain.com' regular_db elsif request.host == 'myapp2.domain.com' alternate_db end end def regular_db ActiveRecord::Base.establish_connection :production end def alternate_db ActiveRecord::Base.establish_connection( :adapter => 'mysql', :host => '...', :username => '...', :password => '...', :database => 'alternatedb' ) end end The problem is when it switches databases using this method, all connections (including valid sessions across the different subdomains get interrupted...). All examples online have people controlling database connectivity at the model level, but this would involve adding code all over my application. Is there some way to globally switch database connections on a per-request basis in the manner I'm suggesting above WITHOUT having to inject code all over my application? The added complexity here is I'm using Heroku as a hosting provider, so I have no control at the apache / rails application server level. I have looked at solutions like dbcharmer and magicmodels, but none seem to show examples of doing it in the manner that I'm trying to. Thanks for any help!

    Read the article

  • Want to improve my simple site/db backup script with auto removal of old backups.

    - by Robert Robb
    I have the following simple script for backing up my website files and db. The script is run each day via a cron job. #!/bin/sh NOW=$(date +"%Y-%m-%d") mysqldump --opt -h localhost -u username -p'password' dbname > /path/to/folder/backup/db-backup-$NOW.sql gzip -f /path/to/folder/backup/db-backup-$NOW.sql tar czf /path/to/folder/backup/web-backup-$NOW.tgz /path/to/folder/web/content/ It works great, but I don't want loads of old backups clogging my system. How can I modify the script to remove any backups older than a week when the script is run?

    Read the article

  • ShowWindow not working from a DLL on a 64-bit OS?

    - by Auto Roast
    I have a process that calls SetWindowsHook to catch keyboard events. In the DLL that processes the events, I conditionally call ShowWindow on the handle of the window of the process who set the hook. That code works perfectly on a 32-bit OS (XP) and as a 32-bit application on a 64-bit OS, but when compiled to 64-bit, the window is not showing. The code to make the window visible is: if (idx == passlen) { HWND h = FindWindow(NULL,windowNameToShow); ShowWindow(h,SW_SHOW); idx = 0; logger->backerase(passlen - 1); nextCharToMatch = passPointer; }

    Read the article

  • How can I stop an auto-generated Linq to SQL class from loading ALL data?

    - by Gary McGill
    I have an ASP.NET MVC project, much like the NerdDinner tutorial example. (I'm using MVC 2, but followed the NerdDinner tutorial in order to create it). As per the instructions in part 3 of the tutorial, I've created a Linq-to-SQL model of my database by creating a "Linq to SQL Classes" (.dbml) surface, and dropping my database tables onto it. The designer has automatically added relationships between the generated classes based on my database tables. Let's say that my classes are as per the NerdDinner example, so I have Dinner and RSVP tables, where each Dinner record is associated with many RSVP records - hence in the generated classes, the Dinner object has a RSVPs property which is a list of RSVP objects. My problem is this: it appears (and I'd be gladly proved wrong on this) that as soon as I access a Dinner object, it's loading all of the corresponding RSVP objects, even if I don't use the RSVPs member. First question: is this really the default behavior for the generated classes? In my particular situation, the object graph contains many more tables (which have an order of magnitude more records), and so this is disastrous behaviour - I'd be loading tons of data when all I want to do is show the details of a single parent record. Second question: are there any properties exposed through the designer UI that would let me modify this behavior? (I can't find any). Third question: I've seen a description of how to control the loading of related records in a DataContext by using a DataShape object associated with the DataContext. Is that what I'm meant to do, and if so are there any tutorials like the NerdDinner one that would show not only how to do it, but also suggest a 'pattern' for normal use?

    Read the article

  • How can I make Outlook 2007 auto BCC messages to a specific email with specific words in subject usi

    - by tgadd
    So far I have this code from outlookcode.com which I can get to work sending all emails I send to the BCC email. I am not a developer, so I don't have a lot of context to go about editing this myself, or even approaching researching this. If anyone knows how to make this check for words in the subject, or check if the subject equals a certain string, I'd really appreciate it. Private Sub Application_ItemSend(ByVal Item As Object, _ Cancel As Boolean) Dim objRecip As Recipient Dim strMsg As String Dim res As Integer Dim strBcc As String On Error Resume Next ' #### USER OPTIONS #### ' address for Bcc -- must be SMTP address or resolvable ' to a name in the address book strBcc = "[email protected]" Set objRecip = Item.Recipients.Add(strBcc) objRecip.Type = olBCC If Not objRecip.Resolve Then strMsg = "Could not resolve the Bcc recipient. " & _ "Do you want still to send the message?" res = MsgBox(strMsg, vbYesNo + vbDefaultButton1, _ "Could Not Resolve Bcc Recipient") If res = vbNo Then Cancel = True End If End If Set objRecip = Nothing End Sub

    Read the article

  • How to auto apply drag and drop effect to dynamically added element ?

    - by Relax
    I use jquery ui to apply a drag and drop effect on a serial of DIVs, for example: <div class="draggable">...</div> <div class="draggable">...</div> <div class="draggable">...</div> <div class="draggable"> this DIV was dynamically added, not draggable </div> The problem is dynamically added DIVs won't have this effect applied, how can i apply this effect on new members too?

    Read the article

  • In Jetty, can NCSARequestLog be configured to auto-detect the time zone?

    - by David Moles
    It looks as though in 2003 or so NCSARequestLog would pick up the system time zone using TimeZone.getDefault().getID(), but in more recent versions it seems as though it's hard-coded to GMT, unless you override it in jetty.xml or programmatically. If true, this kind of annoying, since it means if you don't want GMT logging you have to edit jetty.xml for every installation (not to mention twice a year for daylight saving time). Is there a workaround that will let Jetty pick the time zone up from the system?

    Read the article

  • What is the best way to auto-generate INSERT statements for a SQL Server table?

    - by JosephStyons
    We are writing a new application, and while testing, we will need a bunch of dummy data. I've added that data by using MS Access to dump excel files into the relevant tables. Every so often, we want to "refresh" the relevant tables, which means dropping them all, re-creating them, and running a saved MS Access append query. The first part (dropping & re-creating) is an easy sql script, but the last part makes me cringe. I want a single setup script that has a bunch of INSERTs to regenerate the dummy data. I have the data in the tables now. What is the best way to automatically generate a big list of INSERT statements from that dataset? I'm thinking of something like in TOAD (for Oracle) where you can right-click on a grid and click Save As-Insert Statements, and it will just dump a big sql script wherever you want. The only way I can think of doing it is to save the table to an excel sheet and then write an excel formula to create an INSERT for every row, which is surely not the best way. I'm using the 2008 Management Studio to connect to a SQL Server 2005 database.

    Read the article

  • How do I tell eclipse to auto-generate or retain stubs when it starts and does a clean build?

    - by Erick Robertson
    I'm working on a Java application that uses JavaSpace. We're developing this in Eclipse. There are a couple instances where we are inserting code into the JavaSpace to do some more advanced space notification logic. Doing this requires that we generate stubs for the classes used within the JavaSpace. We use an external script to generate these stubs. The problem is that whenever Eclipse restarts, it does a clean build of the whole application. When it does this, it deletes all the stubs and we have to regenerate them. I would like to find a way to either tell Eclipse not to remove the _stub.class and _skel.class files within the bin folder where the .class files are placed. Either that, or somehow teach Eclipse to generate the stub files whenever it does a rebuild (and I suppose whenever the source files from which the stubs are generated changes). How can I do one of these, so that we don't have to manually build the stubs every time we start up Eclipse?

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >