Search Results

Search found 79383 results on 3176 pages for 'type system'.

Page 623/3176 | < Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630  | Next Page >

• where are the "ipmi sel" entries parameter descriptions?

  - by Horatiu

  In order to troubleshoot a possible hardware issue I have installed ipmitools on my server and am doing queries for info related to poweron/poweroffs, hardware added/removed/status. I am trying to find some info on how to interpret sel obtained via ipmi sel list and the output looks like this : 72b4 | 10/31/2013 | 10:42:40 | System Event #0x01 | OEM System boot event | Asserted 72c8 | 10/31/2013 | 10:42:48 | System ACPI Power State #0x82 | S0/G0: working | Asserted I really want to know what "Asserted" means in this context, and also, where can I find a reference with all possible "exit status(es)" ? (Because I think that's what this is, right ?)

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• Concurrent modification during backup: rsync vs dump vs tar vs ?

  - by pehrs

  I have a Linux log server where multiple applications write data. Data is written in bursts, and in a lot of different files. I need to make a backup of this mess, preferably preserving as much coherence between the file versions as possible and avoiding getting truncated files. Total amount of data on the server is about 100Gb. What I really would want (but can't) is to shut-down, backup the system cold and then start it up again. What kind of guarantees against concurrent modification does the various backup tools give? When do they "freeze" the file versions? I am looking at rsync, dump and tar at the moment, but I am open for other (open source) alternatives. Changing the application or blocking writing for backups is sadly not an option. System is not running LVM (yet), but I have considered that for rebuilding the system and then snapshots.

  Read the article

• CPU?: Not responding

  - by James

  I'm attempting to build a system for co-location. I've been running into issues while trying to install CentOS 6.3 System Specs: Motherboard: ASUS m5a99x Process: AMD FX-8120 (8-core Bulldozer) Memory: 2x 4gb G-Skill 2133 running at 1600 I keeps giving me an error message: CPU1: Not Responding. CPU2: Not Responding. CPU3: Not Responding. CPU4: Not Responding. CPU5: Not Responding. CPU6: Not Responding. Then it instantly restarts. I have tried installing it from USB, Multiple DVDs, Multiple Distros. I have also in the bios attempted to disable cores. I was able to disable 2/3 4/5 6/7. I have also ensured that there is zero overclocking. The system works fine in a windows environment. I'm out of ideas.

  Read the article

• windows server secondary plex or windows server default

  - by shiva

  I am new to handling issues on server. when my system tried to reboot I could see two installables to boot from. windows server 2012- current os windows server secondary plex. So when ever there is a system restart the system it stops at this screen. And since I am connecting to this server using RDP I have to wait for the hetzner console to click on of the os to boot. Even though the current os is set as default and time given is 30 sec, it still waits for a user input. So I want to know which of the two should I be using to boot and I just want one os.

  Read the article

• Limit ftp users to only certain directories in Ubuntu

  - by George

  There are several questions around limiting ftp users to certain directories. However, most of them refer to vsftpd, which I don't think I have installed on my system. I'm running Ubuntu 9.04. How can I tell what ftp service I have installed, and then limit certain users to only the /home/ftpuser directory instead of having full access to the file system? I think I can add them to a separate group and give that group access to the proper directories, but then do I have to remove that groups permissions from all other directories? It seems like there should be an easy way like setting the chroot_local_user value in the /etc/vsftpd/vsftpd.conf file, but that doesn't exist on my system.

  Read the article

• IBM x3620 Server takes a long time to boot past UEFI to OS

  - by Joel Coel

  I have a pair of IBM System x3620 servers. These servers do fine once they finally reach the point where the operating system takes over, but it takes them forever to get past the new-fangled UEFI boot system... a good five minutes or so; maybe longer. I haven't timed it, but it's the kind of thing where you go get a cup of coffee while you wait and it's still going when you come back. Normally the only time I shut these down is for a monthly maintenance cycle (usually just windows updates), and so it's not a big deal. But in the case where I might have an outage I'd sure like to get that 5 minutes back. Is there anything I can do to tell them to just go ahead and boot already?

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• On Windows 7, how can I make the Start Menu search feature include matches from within words, not just the start of the word?

  - by Gabriel

  I have a program installed called WinSCP. When I press the Windows key and type "SCP", I get "No items match your search." Is there a configuration option I can set somewhere, so that this item will be found? I'm not looking for a specific solution for this particular program, but something general, so that if there's a program named XYZ, I can find it via the Start Menu search by entering YZ. EDIT TO ADD: I'm looking for a "set-it and forget-it" type of configuration change, so that within-word searching happens always, automatically. I don't want to have to type a * before every query. Apparently this wasn't clear from what I wrote above.

  Read the article

• Incident Management-Monitoring Ideas

  - by sprsr

  Hello all, What we are tring to do at our company (banking industry) is to apply some ITIL (Information Technology Infrastructure Library) principles and I need some ideas to develop our incident management system of our company. For those who have experienced with incident management, what are the things that helps you most ? What are the things that you can't live without while managing the incidents. Do you have some good screenshots of such a monitoring software ? Since we choosed to develop our own system instead of buying a big system, there are lots of things we may miss, and we are brainstorming here. I need some key points that most crucial in incident management and monitoring. Thanks.

  Read the article

• Performance improvements of VBulletin by integrating the plugins

  - by reggie

  I have amassed quite a lot of plugins and code that is being hooked into VBulletin's plugin system. There are good uses for this system. But since I am now locked in with the VB 3 branch and it is no longer updated, I wonder what kind of performance improvements I would see if I integrated all the plugins into the vbulletin files and turned the plugin system completely off. My site has about 1.5 mio posts, about 100,000 threads, 100,000 members (of which 10,000 are "active"). I estimate I have about 200 plugins from different products in the plugin manager. Has anybody ever tried this move and could share the experiences?

  Read the article

• Mounting both /dev/sda and /dev/sda1 - how can this be?

  - by itsadok

  I work on an Amazon EC2 instance that somebody else set up. We have an EBS volume mounted on /dev/sda, even though the root device is already on /dev/sda1, and we're also using `/dev/sda2' user@server:~$ mount /dev/sda1 on / type ext3 (rw) ... (snip) /dev/sda2 on /mnt type ext3 (rw) /dev/sda on /vol type xfs (rw,noatime) ... This doesn't seem to fit with what I know about the way /dev/ works. How is this possible, and more importantly: will this cause trouble in the future? I'm running ubuntu 9.04 jaunty.

  Read the article

• UUID in Mountain Lion

  - by Naji

  I am trying to find my external HDD UUID in Mountain Lion but diskutil info /dev/disk1s1 returns: Najis-MacBook-Air:~ ****$ diskutil info disk1s1 Device Identifier: disk1s1 Device Node: /dev/disk1s1 Part of Whole: disk1 Device / Media Name: Untitled 1 Volume Name: My Book Escaped with Unicode: My%FF%FE%20%00Book Mounted: Yes Mount Point: /Volumes/My Book Escaped with Unicode: /Volumes/My%FF%FE%20%00Book File System Personality: NTFS Type (Bundle): ntfs Name (User Visible): Windows NT File System (NTFS) Partition Type: Windows_NTFS OS Can Be Installed: No Media Type: Generic Protocol: USB SMART Status: Not Supported Total Size: 2.0 TB (2000364240896 Bytes) (exactly 3906961408 512-Byte-Blocks) Volume Free Space: 212.5 GB (212506509312 Bytes) (exactly 415051776 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Yes Ejectable: Yes Whole: No Internal: No And there is no UUID. What is wrong exactly? Thank you.

  Read the article

• How can I guess if a USB cable will power my devices?

  - by rsanchez

  I've had problems with one long (4 meter) USB Mini-B to USB Type-A cable not being able to boot a 2.5'' external hard disc due to not supplying enough current. On top of that, the cable used a Type-A to Mini-B adapter for the Mini-B part, which probably made things worse. Three different shorter cables I got around made the hard disk work without extra current, so it was definitively the cable's fault. However, if I plugged the hard disk to the power, and used the long cable just for data it worked. Here is some related information on powering through USB cables: http://www.girr.org/mac_stuff/usb_stuff.html I have not any long cables that don't have an intermediary Type-A to Mini-B adapter to try them out. My question is: is there a way to guess if a cable will provide enough power for charge/disk drive power? Is it related to the length of the cable, to the build quality of the cable, or the fact that uses intermediary adapters?

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• Minix3 on Vmware

  Hi, I install minix3 on vmware using installation CD i make using .iso image which is available @minix3 I make 2GB Harddisk, 512MB RAM on VMware, and installed step-by-step. It got installed and working fine. But i wana install 'packman' which is X window system. I'm not able to install it. It asks for installation CD, its still there and its detected also, but i couldn't proceed. Actually i install minix to learn Operating system design and Implementation :) Have any1 tried installing 'packman' i.e X window system on minix3. Please guide me. :)

  Read the article

• Sharepoint 2007 Event ID 6482

  - by Dave M

  Our two server SharePoint 2007 SP2 farm has an issue. Event ID 6482 appears in the Application log of the Web front end many times a day. Often many time a minute. The full error is from Office SharePoint Server Event Type: Error Event Source: Office SharePoint Server Event Category: Office Server Shared Services Event ID: 6482 Date: 11/12/2009 Time: 3:05:22 PM User: N/A Computer: XXXXXX Description: Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (36a9b7ef-59aa-4f94-8887-8bf7b56f2f91). Reason: Error during encryption or decryption. System error code 0. Techinal Support Details: System.ArgumentException: Error during encryption or decryption. System error code 0. at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.SynchronizeDefaultContentSource(IDictionary applications) at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize() at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The SharePoint site appears to be functioning normally and Search returns expected results. Any suggestions would be appreciated

  Read the article

• Unable to install Android for Windows 7 because JDK is not found

  - by user1294663

  I have JDK SE7u4 installed in windows 7. I tried to install Android on Windows 7 using the installer_r18-windows.exe but no avail. The setup window showed the message saying that the Java SE JDK not found and ERROR: Failed to find Java version for C:\Windows\System32\java.exe The system cannot found the file specified. If you believe you have a JDK installed and it was not properly recognized, simply set an environment variable JAVA_HOME to point to it I right clicked on Computer Properties Advanced System Settings Environment variables. I created a NEW system variable called JAVA_HOME and set the value as C:\Program Files\Java\jdk1.7.0_04\bin or C:\Windows\System32\java.exe. I ran the installer again — the same error message still appeared.

  Read the article

• VSTS2010 crashes on opening the team explorer->My queries node

  - by vstsuser

  VSTS2010 crashes on opening the team explorer-My queries node this does not repeat if MSN office communicator (2007 R2 version) is exited. the issue occurs only if MSN office communicator is up and running. (no issues reported by communicator though) Any help in this regard? Debug log: Unable to cast COM object of type 'CommunicatorAPI.MessengerClass' to interface type 'MessengerAPI.IMessenger2'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{....}' failed due to the following error: Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)). Windows event log EventType clr20r3, P1 devenv.exe, P2 10.0.30319.1, P3 4ba1fab3, P4 microsoft.teamfoundation.collaboration.microsoft, P5 10.0.0.0, P6 4c7d8ce4, P7 49, P8 0, P9 system.invalidcastexception, P10 NIL.

  Read the article

• Windows Login Failure

  - by Chris Bateson

  I'm getting an error in the Event Viewer, which is also generating a lot of Logon Failure messages on our syslog server. Pretty much stuck on how to resolve. EventID: 536 Logon Type: 3 Reason: The NetLogon component is not active This is for a Windows Server 2003 system. I have checked here We're using Shavlik Protect 9 to scan and deploy patches. Shavlik stores the credentials for the systems and uses those stored credentials to deploy patches. This system is able to scan and deploy to other systems on the network using those credentials and no errors are generated. When installing to the local system that Shavlik is physically on then this error is generated. Whats interesting is that it doesn't generate during a scan, and the patches install fine. We've contacted Shavlik to get the response that they are unable to help since it's a Microsoft error. Has anyone seen this?

  Read the article

• Encrypt EC2 API call

  - by Frank

  I have to host an AMI in the Amazon Marketplace. i need to get the type of instance, whenever some user launches the AMI., like if its small medium or large. based on that i need to make some changes in the AMI when its created. I can do this with Amazon API call, to get the instance type, but the problem is that the instances created with the AMI will be started by other users, and i cannot use my AWS Credentials in the Amazon API. Is there any way that i can create an anonymous readonly user to make only specific type of EC2 API Calls? Or can i encrypt my EC2 API credentials, so no one can use it?

  Read the article

• listing of VM's created before libvirt installation or started by any other VM management tool

  - by Dr. Death

  if my VM's are not created using virt-manager or are created using any other tool, then virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? I have VM's managed by GKVM, AQEMU, libvirt etc. also some of the user start their VM's using the qemu command as follows: kvm "image name" -m "memory". this starts the VM and allow them to work perfectly. but I am not able to list all these VM's using the virsh system list command.

  Read the article

• Can i setup my second ip adress as secondary nameserver.

  - by Saif Bechan

  I have a server with 2 ip adresses. If i type the first one into my browser i end up with my website. 62.212.66.33 If i type my second ip adress in the bar i end up somewhere else. 62.212.66.56 Can i set this second ip to act as secondary nameserver. I made NS and a records for the domains. Waited 72 hours. But it returns no records. for dns check. Is this type of setup possible?

  Read the article

• Shorewall SHOW DYNAMIC command doesn't work

  - by Andrew Burns

  Setting up shorewall dynamic zones, http://shorewall.net/Dynamic.html shows the command shorewall show dynamic zone where zone is one of your zones. I can get the add and delete commands to work, but not the show dynamic command. Here is a shell session, with output from ipset list that proves that the items are indeed there. $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16520 References: 66 Members: 192.168.85.153 $ shorewall add br0:192.168.85.200 CPREM Host br0:192.168.85.200 added to zone CPREM $ shorewall show dynamic CPREM $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16536 References: 66 Members: 192.168.85.153 192.168.85.200 $ shorewall delete br0:192.168.85.200 CPREM Host br0:192.168.85.200 deleted from zone CPREM $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16536 References: 66 Members: 192.168.85.153 I am using the packaged version from Ubuntu 12.04 (4.4.26.1-1)

  Read the article

• How come Win+R prompt can open Python when it's not in my path?

  - by houbysoft

  When I use the run prompt in Windows XP Professional (Win+R), and type python.exe or python, it works and greets me with the python prompt. However, when I start a cmd window, and then type python.exe or python, it doesn't find it. This is what I expect, as the Python directory (for me, I:\Python31\) is not in my PATH. How come, then, that if I type python.exe in the Win+R prompt, it works? Edit: here is a partial output of SET, I removed most irrelevant entries, I'm not sure why is it useful, apart from the PATH variable which I already said doesn't include the Python directory. If you need a particular variable other than these, please ask. CLIENTNAME=Console CommonProgramFiles=I:\Program Files\Common Files ComSpec=I:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK=NO OS=Windows_NT Path=I:\WINDOWS\system32;I:\WINDOWS;I:\WINDOWS\system32\WBEM;I:\WINDOWS\system32\WindowsPowerShell\v1.0;I:\Qt\2010.05\mingw\bin;I:\Program Files\CMake 2.8\bin PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1 ProgramFiles=I:\Program Files PROMPT=$P$G SESSIONNAME=Console SystemDrive=I: SystemRoot=I:\WINDOWS VBOX_INSTALL_PATH=I:\Program Files\Oracle\VirtualBox\ windir=I:\WINDOWS

  Read the article

< Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630  | Next Page >