Search Results

Search found 48308 results on 1933 pages for 'embedded system'.

Page 625/1933 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

  • Innodb : cannot allocate the memory for the buffer pool

    - by mingyeow
    My innodb keeps crashing. This is the error message below. Does anyone know why this keeps happening? InnoDB: by InnoDB 49201616 bytes. Operating system errno: 12 InnoDB: Check if you should increase the swap file or InnoDB: ulimits of your operating system. InnoDB: On FreeBSD check you have compiled the OS with InnoDB: a big enough maximum process size. InnoDB: Note that in most 32-bit computers the process InnoDB: memory space is limited to 2 GB or 4 GB. InnoDB: We keep retrying the allocation for 60 seconds... 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! InnoDB: Fatal error: cannot allocate the memory for the buffer pool [ERROR] Default storage engine (InnoDB) is not available

    Read the article

  • DNS error only in IE

    - by Le_Quack
    Our Intranet page has stopped working on some machines/some user accounts. The error I am getting points to a DNS issue but If I ping the site from the command line the it responds fine. The error I'm gettting on IE is Error: The web filter could not find the address for the requested site Why are you seeing this: The system is unable too determine the IP address of intranet.example.com I'm not quite sure why it mentions the web filter as there is a proxy exception for the intranet page and if I run a trace route it doesn't go via the web proxy (filtering system). Finally it isn't affecting everyone, just random users, also it doesn't affect the random users on all the client machines they use. I have one user where it happens on any client they log onto where most its just certian clients. It's even "fixed" itself for a few peoples. EDIT: hey Mikey thanks for the fast response. Proxies are correct and automatic configuration is off (both via GPO)

    Read the article

  • Abnormal hangs and restarts Ubuntu 8.04

    - by jai-ho
    Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

    Read the article

  • XP boot timer=> set, but does nothing?

    - by mark
    My PC has XP Pro and the boot.ini file looks like this: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(2)\windows [operating systems] C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons multi(0)disk(0)rdisk(0)partition(2)\windows="eXPee Pro" /noexecute=optin /fastdetect Up until about a week ago it would just time-out and boot normally. I haven't made any hardware changes at all. Now, when the system boots it just sits there and waits for me to hit -enter-. I've searched all over for explanations & possible causes, but found nothing which seems to relate. Anyone here have any idea what may have caused the timer to simply quit working like that ? (BTW, the system clock works just as it ever did and keeps time precisely.) Thanks.

    Read the article

  • Virtual guest does not have network access in cafe.

    - by blee
    My Virtualbox guest OS (Ubuntu on ubuntu host) does not connect to the internet when I have wifi access through an internet cafe system. By this, I mean where your browser redirects to an internal web page where you can enter a code. On the guest, I can successfully connect to the virtual network adapter, but I do not get internet access, nor a redirect to the internal web page. I use OpenDNS for the host. I have no problems when connecting through ethernet or regular wifi. Can someone tell me any of: 1) How to fix the problem. 2) How such cafe systems work. 3) At least point me to a technical explanation of such a cafe system so I can begin to troubleshoot. Thanks!

    Read the article

  • postfix error: open database /var/lib/mailman/data/aliases.db: No such file

    - by Thufir
    In trying to follow the Ubuntu guide for postfix and mailman, I do not understand these directions: This build of mailman runs as list. It must have permission to read /etc/aliases and read and write /var/lib/mailman/data/aliases. Do this with these commands: sudo chown root:list /var/lib/mailman/data/aliases sudo chown root:list /etc/aliases Save and run: sudo newaliases I'm getting this kind of error: root@dur:~# root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo dur 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 01:16:43 dur postfix/master[19444]: terminating on signal 15 Aug 28 01:16:43 dur postfix/postfix-script[19558]: starting the Postfix mail system Aug 28 01:16:43 dur postfix/master[19559]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:16:45 dur postfix/postfix-script[19568]: stopping the Postfix mail system Aug 28 01:16:45 dur postfix/master[19559]: terminating on signal 15 Aug 28 01:16:45 dur postfix/postfix-script[19673]: starting the Postfix mail system Aug 28 01:16:45 dur postfix/master[19674]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:17:22 dur postfix/smtpd[19709]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1] Aug 28 01:18:37 dur postfix/smtpd[19709]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# root@dur:~# And am wondering what connection might be. I do see that I don't have the requisite files: root@dur:~# root@dur:~# ll /var/lib/mailman/data/aliases ls: cannot access /var/lib/mailman/data/aliases: No such file or directory root@dur:~# At what stage were those aliases created? How can I create them? Is that what's causing the error error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1]?

    Read the article

  • Best Processor for MediaSmart Server?

    - by Kent Boogaart
    I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

    Read the article

  • HOSTS ignored when disconnected [closed]

    - by Synetech
    Problem I’m seeing a strange and extremely frustrating problem. Any system that is not connect to the Internet (Windows 7 shows the no Internet access icon because it cannot constantly ping Microsoft’s servers) cannot even access locally hosted servers. Hypothesis The problem appears to be that the HOSTS file is not being used to resolve DNS entries when there are no active NICs. Tests / Reproduction You can reproduce it as so: Disconnect a system from the Internet (make sure all wired and wireless connections are disconnected). If necessary, add an entry to the HOSTS file (e.g., 127.0.0.1 foobar or 127.0.0.1 foobar.com) Open a command-prompt Type ping foobar or ping foobar.com Observations The screenshots below show a clear and demonstrative example. In the first snap, a laptop is connected to a router wirelessly. The HOSTS file has only three entries and they resolve just fine. In the second snap, the wireless radio is turned off, so the entries in the HOSTS file are ignored. Moreover, notice that pinging localhost still works even without any active NICs (as does 127.0.0.1), but it is using the IPv6 address (must be hard-coded). You can see the same results in Windows XP with no IPv6 installed, so it has nothing to do with IPv6. I tried pining what should have resolved to 127.0.0.1 while the desktop system (with no wireless NICs) was connected via its Ethernet adapter, then again after pulling the cable from the router and waiting a couple of seconds, then again after plugging the cable back in. The same thing happens if instead of pulling out the cable, the NIC is disabled through software (the [Disable] button in the NIC’s Status dialog or via Device Manager). Conclusions It looks as though the HOSTS file is only being read and used if there is an active NIC, otherwise it is being ignored. This makes some sense in that if there are no active network adapters, then presumably there will not be any network activity, and thus no need to resolve host names via the HOSTS file. This assumption is specious however because it precludes locally hosted virtual servers. The HOSTS file should be used regardless of external DNS server connectivity, otherwise you cannot use simple/consistent/testing-production names for locally hosted servers when not connected to the Internet (for example web servers; help servers for Visual Studio, 3dsmax, etc.; and so on). Question Does anyone know how to force Windows to use the HOSTS file even if there are no active NICs? Appendix Figure 1: While the wireless NIC is connected to the router (the cable-modem is in standby, so no external Internet connectivity). Figure 2: With the wireless radio turned off (the Ethernet port is not unconnected in both cases). Figure 3: Same results in XP with no IPv6

    Read the article

  • Installing Ubuntu to a USB drive

    - by Carl Smotricz
    I'm having a rough time getting Ubuntu to run from a 250 GB USB hard drive. I booted Ubuntu 9.10 from a CD and ran the regular "install" to the attached USB drive. I used the "advanced" option on the drive partition question to put the boot loader on /dev/sdb (the USB disk) but when I boot the machine it doesn't recognize there's a boot loader on the USB drive (it offers to boot from 2 other devices but not the USB disk). I also tried booting from the Ubuntu CD and using usb-creator-gtk to set up the USB drive. Seems to me this is meant to work with flash drives. I got a bootable USB disk but it looked and worked like the CD, i.e. it gave me options of "live CD" operation, installing, memtest, etc. That's not the way I want to run the system. Some help in installing Ubuntu, bootable into a "full" running system on my USB drive would be appreciated.

    Read the article

  • Difficulty in running Tomcat v7.0 with Eclipse Juno

    - by user1673718
    I get the following error when I run my JSP file in Eclipse-Juno with Tomcat v7: 'starting Tomcat v7.0 server at localhost' has encountered a problem. Port 8080 required by Tomcat v7.0 server at localhost is already in use. The server may already be running in another process, or a system process may be using the port. To start this server you will need to stop the other process or change the port number(s). I have Oracle 10g installed in my System. When I type "http://localhost:8080" it opens the Oracle 10g license agreement so I think Oracle 10g is already running in that port. To change the port of Tomcat I tried Google, which said to change the port in the "C:\Program Files\Apache Software Foundation\Apache Tomcat 7.0.14\conf\httpd.conf" file But at "C:\Program Files\Apache Software Foundation\Apache Tomcat 7.0.14\conf" there was no httpd.conf file. I only have "catalina.policy,catalina.properties,context,logging.properties,server,tomcat-users,web" files in that conf folder. I use windows XP.

    Read the article

  • Which FLOSS text editor is most like kwrite without being KDE-based?

    - by darenw
    Among text editors on Linux, I usually prefer KWrite. I like that I can quickly turn on/off line numbers and line wrap in the View menu. Other settings are easy to change. Other text editors I've used in the past, such as Gnome's gedit, bury line numbering and wrapping checkboxes deeper into the menu system, making it more distracting to change while concentrating on real work. However, KWrite is a KDE app. On Ubuntu it drags in over a dozen other packages, which I suspect I don't really need. Why would a text editor need all that? It's slower to start up than some other editors I've tried. I'm also trying to run an all-gnome system w/o any KDE, just to see how far I get with it. So, what GUI text editor isn't KDE-based, has few dependencies and quick start-up, easy to change line wrap and numbering, and general similarity to KWrite? What comes closest?

    Read the article

  • off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

    - by Eric Liprandi
    I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

    Read the article

  • two operating systems sharing their file systems with eachother (Windows and Linux)

    - by John Kube
    I have two operating systems installed on my notebook computer, Windows Vista and Ubuntu Linux. When I boot up, I'm presented with a bootloader which allows me to choose which one I want to load. I'm interested in sharing each operating system's file system with the other, such that I could access my Windows files from Linux and vice-versa. Is this possible, and if so how would one go about setting it up? Feel free to just post a link to an existing solution if there is one. I would Google for this myself, but I don't even know what to search for, as I don't know what this is called.

    Read the article

  • VIM zsh, bash and colors in command line on Ubuntu

    - by Jacek Wysocki
    I have problem with VIM command line when calling system commands. e.g. !ls, all command output colors aren't parsed by VIM. My system is Ubuntu 12.04 LTS with VIM 7.3.429 from Ubuntu repositories. Is there any workaround for this problem? EDIT: My vimrc file :!echo $TERM in VIM returns : dumb EDIT2: I found a simple workaround but it's not perfect if [ "$VIM" ] && [ "$TERM" = "dumb" ] then # For gvim's monochromatic :shell PS1='\n\u@\h \w\n\$ ' unalias ls unalias grep fi (It's working on bash)

    Read the article

  • Something eating space on OS drive

    - by noquery
    I am facing low disk space issue from last few days. I checked with Restore,System Volume Information, $Recycled folders. But there is nothing which is occupying space. I had scanned my system for virus too. Total size of C: is 18 GB. But when I select all folders inside C: and query for used space, it shows 20+ gb space is used. I vacate space some how by deleting temp files, program's cache files, disk clean up etc up to (3 gb). And I ensured that no cache/temp files are recreated who can use the space again. Even after cleaning so much data, I am again facing low disk space issue. Something is eating disk space within 15-20 mins.

    Read the article

  • umount bind of stale NFS

    - by Paul Eisner
    i've got a problem removing mounts created with mount -o bind from a locally mounted NFS folder. Assume the following mount structure: NFS mounted directory: $ mount -o rw,soft,tcp,intr,timeo=10,retrans=2,retry=1 \ 10.20.0.1:/srv/source /srv/nfs-source Bound directory: $ mount -o bind /srv/nfs-source/sub1 /srv/bind-target/sub1 Which results in this mount map $ mount /dev/sda1 on / type ext3 (rw,errors=remount-ro) # ... 10.20.0.1:/srv/source on /srv/nfs-source type nfs (rw,soft,tcp,intr,timeo=10,retrans=2,retry=1,addr=10.20.0.100) /srv/nfs-source/sub1 on /srv/bind-target/sub1 type none (rw,bind) If the server (10.20.0.1) goes down (eg ifdown eth0), the handles become stale, which is expected. I can now un-mount the NFS mount with force $ umount -f /srv/nfs-source This takes some seconds, but works without any problems. However, i cannot un-mount the bound directory in /srv/bind-target/sub1. The forced umount results in: $ umount -f /srv/bind-target/sub1 umount2: Stale NFS file handle umount: /srv/bind-target/sub1: Stale NFS file handle umount2: Stale NFS file handle Here is a trace http://pastebin.com/ipvvrVmB I've tried umounting the sub-directories beforehand, find any processes accessing anything within the NFS or bind mounts (there are none). lsof also complains: $ lsof -n lsof: WARNING: can't stat() nfs file system /srv/nfs-source Output information may be incomplete. lsof: WARNING: can't stat() nfs file system /srv/bind-target/sub1 (deleted) Output information may be incomplete. lsof: WARNING: can't stat() nfs file system /srv/bind-target/ Output information may be incomplete. I've tried with recent stable Linux kernels 3.2.17, 3.2.19 and 3.3.8 (cannot use 3.4.x, cause need the grsecurity patch, which is not, yet, supported - grsecurity is not patched in in the tests above!). My nfs-utils are version 1.2.2 (debian stable). Does anybody have an idea how i can either: force the un-mount some other way? (any dirty trick is welcome, data loss or damage neglible at this point) use something else instead of mount -o bind? (cannot use soft links, cause mounted directories will be used in chroot; bindfs via FUSE is far to slow to be an option) Thanks, Paul Update 1 With 2.6.32.59 the umount of the (stale) sub-mounts work just fine. It seems to be a kernel regression bug. The above tests where with NFSv3. Additional tests with NFSv4 showed no change. Update 2 We have tested now multiple 2.6 and 3.x kernels and are now sure, that this was introduced in 3.0.x. We will fille a bug report, hopefully they figure it out.

    Read the article

  • dead man's switch for remote networking interventions

    - by ascobol
    Hi, As I'm going to change the network configuration of a remote server, I was thinking of some security mechanisms to protect me from accidentally loosing control on the server. The level-0 protection I'm using is a scheduled system reboot: # at now+x minutes > reboot > ctrl+D where x is the delay before reboot. While this works relatevly well for very simple tasks like playing with iptables this method has at least two drawbacks: It's not very reactive, ie a connectivity problem should be detected automatically if for example an automatic remote ssh command fails does not work anymore for x seconds. It can obviously not work if one need to modify some configuration files and then reboot to test the changes. Are you guys using some tool for the second point ? I would love to have something able to revert the system configuration in a previously known stable state if I can't join the server X minutes after reboot. Thanks!

    Read the article

  • Reverse rdesktop or VNC overlay image!

    - by carlesso
    Hi all. I've got a central server (linux based) and many clients (Windows XP Embedded, afaik) in public places around my country. I need to have these clients to connect to the server with a "reverse" tunnel, that is to say that I need to control the clients from the server but the connection is initialized by clients. The requirement is that, during the connection, an overlay image (or something like that, like a modified version of login screen) is displayed. Some stuff like "Work In Progress". My first idea was to use vncviewer -listen and vnc in reverse mode, but cannot understand how to obfuscate the work I'm doing. Other idea was to use rdesktop in "reverse" mode, but it seems it does not support it. Using rdekstop reverse seems the nicest solution (I can login back the user was in before connection, the login manager - which I can modified - is displayed), but any hint will be appreciated! Thanks in advance!

    Read the article

  • MS SQL dts to ssis migration error

    - by Manjot
    Hi, I have migrated some DTS packages to SSIS 2005 using "Migration" wizard. When I tried to run it, it fails saying you need a higher version of SSIS even though the destination SSIS server is on 9.0.4211 level. then I digged in the package using business intelligence studio and saw that one of the package subtasks is "Transform data task" (the dts version) and the package fails to run that. The storage location for this dts task is set to "Embedded in Task". I didn't touch it. why didn't it convert this task to an SSIS data flow task? any help please? Thansk in advance

    Read the article

  • Cannot connect Office 365 email with Outlook 2010

    - by Dimitris
    I have an email address of the form [email protected] that I am accessing through this site. I had connected my email to Outlook 2010 and it was working fine. Recently, it started requesting credentials every time I logged in, without connecting to the email server even after entering the correct password. I had already decided to reinstall Windows 7, so I thought that would also fix this problem. Unfortunately it did not. I tried the troubleshoot function embedded in the Office 365 capabilities, but it did not find anything wrong. I suspect that one possible source of this problem could be the fact that in the control panel it states Mail (32-bit) while Windows is 64-bit (office is 32 as well). In addition when trying to remove an email account from the list it remains there unaffected. Does anybody know what should I do in order to fix this problem?

    Read the article

  • Microsoft equation editor space problem

    - by Keshav Prasad
    When I use the Microsoft equation editor, if I have a word that is greater than 10 characters in length, the equation editor automatically breaks the word and puts spaces in between them when the object is embedded in a powerpoint slide. For example- If I have the word "automatically" in the equation editor, it shows up just fine when I am editing the text in the equation editor. But when I update this object to the powerpoint slide, it shows up as "automatica lly". There is a tab or 5 spaces between "automcatica" and "lly". Is there any way to solve this problem? Thanks! -Keshav

    Read the article

  • PostgreSQL: performance descrease due to index bloatper

    - by Henry-Nicolas Tourneur
    I'm running a PgSQL 8.1 on a CentOS 4.4 system (not upgradable unfortunately). There's a Java app running on top of the PgSQL daemon and we got to reindex the database every 2 months or so. Also important: the database isn't growing. It looks like the bloat is now coming faster than before and this tends to increase. My config is available here, autovacuum daemon is enabled and running quite often: pastebin.com/RytNj7dK You can also find the output of this query wiki.postgresql.org/wiki/Show_database_bloat 3 hours after running reindex: http://pastebin.com/raw.php?i=75fybKyd 72 hours after running reindex: http://pastebin.com/raw.php?i=89VKd7PC Does anyone have any idea what should I tweak to get rid of that growing bloat? Thanks for your help PS: due to antispam prevention system, I had to remove the first 2 http:// prefixes for my two first links.

    Read the article

  • RHEL5: Can't create sparse file bigger than 256GB in tmpfs

    - by John Kugelman
    /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

    Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >