Search Results

Search found 25039 results on 1002 pages for 'machine learning'.

Page 626/1002 | < Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >

  • Setting MacBook timezone to UTC

    - by Andy A
    To run my web app, I need to set my timezone to UTC on my MacBook. I can do this temporarily by opening a Konsole and entering sudo ln -sf /usr/share/zoneinfo/UTC /etc/localtime However, my timezone returns to normal when I restart my machine! Any advice? Edit : The response to this question by 'Celada' implies that I can just make my Server UTC. I am using Apache Tomcat 7. Adding to Celada's response, how can I make it UTC?

    Read the article

  • Resizing an iscsi LUN on an EMC under Linux RHEL 5

    - by niXar
    I expanded a LUN on my SAN (from 30G to 50G), and tried all kind of voodoo but it looks like the system still believes the device is still small, despite showing me the new size alright. # blockdev --getsize64 /dev/sdl 53687091200 # dd if=/dev/sdl skip=$(( 31*1024*1024*1024/512 )) count=1|hexdump -C dd: reading `/dev/sdl': Input/output error The dd line works for blocks below the 30G original size. If I reboot, the problem goes away, but I don't want to since the machine has a dozen VMs running. I tried various magic, such as: iscsiadm -m node -R -I iface0 ... to no avail. Note: I'm not using multipath.

    Read the article

  • Wireless Access Point - Can't ping other machines on the wireless network

    - by Surfer513
    I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

    Read the article

  • CodePlex Daily Summary for Sunday, November 11, 2012

    CodePlex Daily Summary for Sunday, November 11, 2012Popular ReleasesZXMAK2: Version 2.7.2.0: show extended rzx error info fix reset lag for PROFI ULA 5.xx fix reset behavior fix PROFI ULA timings (thanks to solegstar) fix #FF port for PROFI ULA add ATM710 memory module add new predefined machine configs: ATM Turbo 2, PROFI 3.XX???????: Monitor 2012-11-11: This is the first releaseVidCoder: 1.4.5 Beta: Removed the old Advanced user interface and moved x264 preset/profile/tune there instead. The functionality is still available through editing the options string. Added ability to specify the H.264 level. Added ability to choose VidCoder's interface language. If you are interested in translating, we can get VidCoder in your language! Updated WPF text rendering to use the better Display mode. Updated HandBrake core to SVN 5045. Removed logic that forced the .m4v extension in certain ...ImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadPlayer Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...SQL Server Partitioned Table Framework: Partitioned Table Framework Release 1.0: SQL Server 2012 ReleaseSharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.D3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeDictationTool: DictationCool-WPF: • Open a media file to start a new dication. • Open a dct file to continue a dictation. • Compare your dictation with original text if exists. • Save your dictation to dct file, and restore it to continue later. • Save the compared result to html file.MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesDyanamic Reports (RDLC) - SharePoint 2010 Visual WebPart: Initial Release: This is a Initial Release.HTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.Window Manager: Window Manager 1.0: First releaseNew Projectsarteytex: este es una prueba blockworld: An implementation of a goal stack planner.Customer Note: customer note is windows store applicationDraw: ?????????????:??????、CAD??、????。Football Management: Football Management System is web management system for football (soccer) leagues, teams and players. Hijri Converter API: This project is aimed to create a simple RESTful API using VB and ASP.NET to do Hijri-to-Gregorian and Gregorian-to-Hijri conversion.httpclient?????????: httpclient?????????(1)??????????(2)?????????(3)??2012-11-06??,???????。 Imagine Cup 2013: Develop project to Imagine Cup 2013MyAppReji: MyAppN2F Request: The N2F Request object is used to handle interactions between N2F and the global $_REQUEST variable, sanitizing any results which are returned.Orchard Metro Theme: Orchard Metro Theme is a clean and flexible multi-zone theme.Poker Clock And Goodies: poker w8ProjectASPReviewer: Review website for notebooks, tablets and smartphones.Prototype: Its about making an proto type for the final project.Prototype - 7COM0207: 7COM0207 web scripting module, Assignment 2QuickToAD: QuickToAD is a foundational development project for the purpose of jump-starting data-driven application projects.Release Manager: Release Manager is a project to design and develop Windows based Release Management Software.ResW File Code Generator: A Visual Studio 2012 Custom Tool for generating a strongly typed helper class for accessing localized resources from a .ResW file.SEO Tools: This is a website containing some commonly used SEO tools. I have only added a blog ping utility at this time but there is more to come. Thales communicator: A C# library that helps communicate with Thales HSMTrivial: A trivia framework: Trivial is a C# framework that helps you creating custom trivia-like applications.

    Read the article

  • Gre Tunnel Cisco Linux traffic forwarding

    - by mezgani
    I setup a gre tunnel a cisco router and a Linux machine, the tunnel interface in the Linux box named pic. Well i have to forward traffic coming from cisco through the Linux box. the rules i've set in the Linux box is described as follow: echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -i pic -o ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i ppp0 -o pic -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE I see the traffic coming from tunnel and forwarded to internet but no reply from sent packet. May i miss something like a routing rule.

    Read the article

  • Multiple Ubuntu Server SSH Connections

    - by Craig Smith
    I'm trialing a ubuntu server 12.04 LTS to replace a Windows Server that I use but I have got a little stuck with SSH I'm currently able to SSH into the server but I need to have multiple persistent SSH connections as I have at least 3 applications that need to run in the server and still be able to access their terminals to issue commands to the applications. At the moment this is fine if I use the physical terminals of the machine as I can just jump between the three terminals I use but remotely doing this is the issue. As I'm not entirely familiar with this side of linux I'm not sure if this is even possible to do or how to even get around this issue.

    Read the article

  • Problems with mailenable when sending to yahoo mail

    - by Mee
    I'm testing sending emails from mailenable webmail. I have no problems sending mail to gmail or hotmail, both work fine, but yahoo mail sends my messages to the spam folder and shows the attachment icon for the message even though the message doesn't contain any attachments, it's just plain text. It only includes a reply to a previous message, like this: message text ----- Original Message ----- original message text I copied the message content and sent it from gmail to yahoo and the attachment icon didn't show which makes me believe it's something with mailenable. What could possibly be wrong? Also, is there a white list for yahoo mail that I can join? And also for other popular webmail? I'm going to use this on a production website (site visitors use the contact us form to send messages to the site - the mail enable server running on the same machine as the web server - then I check the messages using the mailenable webmail and reply them). This is really important to me, your help would be really appreciated ...

    Read the article

  • Cygwin Python and Windows Ruby

    - by Cheezo
    I have a peculiar setup as follows: I have cygwin installed on a Windows 7 machine. I need execute a python script setup in cygwin from the windows CLI. This works fine : c:\cygwin\bin\python2.6.exe c:\cygwin\bin\python-script This python-script accesses a file: ~/.some_config_file which translates to /home/user-name when i execute it from Windows as above. So this works as expected. Now, the next step is to execute this python script from ruby(which is setup on Windows natively w/o Cygwin). When i execute the script from ruby, the ~/.some_config_file translates to /cygdrive/c/Users/user-name instead of the expected /home/user-name leading to the script failing. I understand that something in the environment, PATH etc needs to be set correctly although i cannot seem to find what exactly.

    Read the article

  • How to list my harddrives in OpenSolaris?

    - by Sanoj
    I have a machine with two harddrives. I have installed OpenSolaris on one of them and now I want to add the other one as a mirror-drive in my zpool. But to do that I have to know the name of my drive, something like c7d0s0. Using the command zpool status can I see the harddrives already in use in my zpool but not the hard-drives that are not in use. How can I list the names of the hard-drives that are not in use in any zpool or list the name of all my hard-drives?

    Read the article

  • slow network in centos5 VM with centos5 host running KVM

    - by dan
    I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

    Read the article

  • Connectivity good between VMs, but no connectivity between host and VM

    - by Greg Sansom
    I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

    Read the article

  • Squid traffic tunneled through VPN

    - by NerdyNick
    So what I'm trying to do is have a Squid Proxy run on 1 machine along side a VPN connection. What I want to happen is all traffic running though the Squad Proxy would run though the VPN for its outbound. ie Desktop - (Squid Proxy - VPN) The goal is to allow my desktop selective tunneling through the VPN. So that Instant Messaging and the like that do not need to run through the VPN can go through my normal traffic. Typically I would go though a SSH Proxy but currently am forced to use VPN to gain entry into the office, and a Squid proxy seemed like it might work out the easiest for what I am needing. EDIT Realize I forgot to actually state what problem I'm running into. I have the Squid setup and verified it works, but once I connect to the VPN. All requests to Squid get accepted but Squid is unable to make the request over the VPN. So the client ends up just sitting there.

    Read the article

  • A client wants us to screen work machines for pornography. Is it possible?

    - by Scant Roger
    A long-time client has asked us to help screen their work machines for pornography. They're worried about liability if sensitive materials were found. Their main concerns (for obvious reasons) are video, audio, and image files. If possible, they'd also like to scan text-based documents for inappropriate content. They have a hierarchy of not-for-work content starting with blatantly illegal (I don't have to list details), moving down to obviously offensive, and also including things that may be offensive to some - think lingerie ads, joke cards featuring butt cracks, and anything related to Howie Mandel. My questions are: Is this ethical? I think it is since every employee legally agrees that their work machine belongs to the company and is subject to search. The screenings are not to occur on personal machines brought to work. Is it feasible? I've done a lot of image processing/indexing but this seems like a whole new world of complexity. Any references to successful techniques for discovering porn? Is it appropriate for me to archive the results when something is discovered?

    Read the article

  • Dynamips Virtual Router not pinging external host after bridging

    - by maiky
    I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

    Read the article

  • Linksys Router/Tomato Firmware DNS issues

    - by jasonh
    I've got a WRT54GS that I've loaded the current version of Tomato onto. I entered static DHCP addresses in for the devices on my network, released and renewed the address on my desktop and tried to ping another computer. All I got was The request could not find host blah. Please check the name and try again. Now, I verified that my desktop and the target machine I'm trying to ping have both received their proper static DHCP lease and that their DNS server is the IP address of my router. What am I missing?

    Read the article

  • Few events I&rsquo;m speaking at in early 2013

    - by Mladen Prajdic
    2013 has started great and the SQL community is already brimming with events. At some of these events you can come say hi. I’ll be glad you do! These are the events with dates and locations that I know I’ll be speaking at so far.   February 16th: SQL Saturday #198 - Vancouver, Canada The session I’ll present in Vancouver is SQL Impossible: Restoring/Undeleting a table Yes, you read the title right. No, it's not about the usual "one table per partition" and "restore full backup then copy the data over" methods. No, there are no 3rd party tools involved. Just you and your SQL Server. Yes, it's crazy. No, it's not for production purposes. And yes, that's why it's so much fun. Prepare to dive into the world of data pages, log records, deletes, truncates and backups and how it all works together to get your table back from the endless void. Want to know more? Come and see! This is an advanced level session where we’ll dive into the internals of data pages, transaction log records and page restores.   March 8th-9th: SQL Saturday #194 - Exeter, UK In Exeter I’ll be presenting twice. On the first day I’ll have a full day precon titled: From SQL Traces to Extended Events - The next big switch This pre-con will give you insight into both of the current tracing technologies in SQL Server. The old SQL Trace which has served us well over the past 10 or so years is on its way out because the overhead and details it produces are no longer enough to deal with today's loads. The new Extended Events are a new lightweight tracing mechanism built directly into the SQLOS thus giving us information SQL Trace just couldn't. They were designed and built with performance in mind and it shows. The new Extended Events are a new lightweight tracing mechanism built directly into the SQLOS thus giving us information SQL Trace just couldn't. They were designed and built with performance in mind and it shows. Mastering Extended Events requires learning at least one new skill: XML querying. The second session I’ll have on Saturday titled: SQL Injection from website to SQL Server SQL Injection is still one of the biggest reasons various websites and applications get hacked. The solution as everyone tells us is simple. Use SQL parameters. But is that enough? In this session we'll look at how would an attacker go about using SQL Injection to gain access to your database, see its schema and data, take over the server, upload files and do various other mischief on your domain. This is a fun session that always brings out a few laughs in the audience because they didn’t realize what can be done.   April 23rd-25th: NTK conference - Bled, Slovenia (Slovenian website only) This is a conference with history. This year marks its 18th year running. It’s a relatively large IT conference that focuses on various Microsoft technologies like .Net, Azure, SQL Server, Exchange, Security, etc… The main session’s language is Slovenian but this is slowly changing so it’s becoming more interesting for foreign attendees. This year it’s happening in the beautiful town of Bled in the Alps. The scenery alone is worth the visit, wouldn’t you agree? And this year there are quite a few well known speakers present! Session title isn’t known yet.       May 2nd-4th: SQL Bits XI – Nottingham, UK SQL Bits is the largest SQL Server conference in Europe. It’s a 3 day conference with top speakers and content all dedicated to SQL Server. The session I’ll present here is an hour long version of the precon I’ll give in Exeter. From SQL Traces to Extended Events - The next big switch The session description is the same as for the Exeter precon but we'll focus more on how the Extended Events work with only a brief overview of old SQL Trace architecture.

    Read the article

  • WinXP How to Tunnel LPT over USB

    - by Michael Pruitt
    I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

    Read the article

  • Using tshark to generate traffic logs every X seconds

    - by Sridhar Iyer
    I'm trying to use tshark to maintain a running history of all the packets that are going through an interface, for say 30 seconds. I want it to be human readable. This is a linux machine, and without mucking too much into the netstack source (which I can do if push comes to shove), I was wondering if I can use tshark to this. tshark has a -b duration:10 -b files:2 which I can use to generate a rotating set of 2 files, but I don't know which format it is printing the file in or how to read it.

    Read the article

  • Don&rsquo;t use MySQL .net connector, here is why ?

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/donrsquot-use-mysql-.net-connector-here-is-why.aspxIf you use .net mysql connector and all project new or old use different different version of Mysql .net connector then you need to upgrade it to latest (if you don’t use copy local=true for bin assembly). This is not the single problem happen to me.   In my case I use .net connector 6.7.4.0 and let’s see what happen to me after I start using it. 6.7.4.0 install register the mysql module in machine.config and it’s broke every software you haven’t deployed with Mysql.   Suppose for example I just create a website ( in webmatrix 3) put my index.cshtml and now see what it preview for me. This means I need to add the mysql.Web even I don’t use any kind of database. I need to do every asp.net mvc project no matter they use mysql. it’s problematic when we use older .net  mysql connector in some of my project.   If you have trouble like this simply use nuget and say Bye bye to this trouble.

    Read the article

  • Session Update from IASA 2010

    - by [email protected]
    Below: Tom Kristensen, senior vice president at Marsh US Consumer, and Roger Soppe, CLU, LUTCF, senior director of insurance strategy, Oracle Insurance. Tom and Roger participated in a panel discussion on policy administration systems this week at IASA 2010. This week was the 82nd Annual IASA Educational Conference & Business Show held in Grapevine, Texas. While attending the conference, I had the pleasure of serving as a panelist in one of many of the outstanding sessions conducted this year. The session - entitled "Achieving Business Agility and Promoting Growth with a Modern Policy Administration System" - included industry experts Steve Forte from OneShield, Mike Sciole of IFG Companies, and Tom Kristensen, senior vice president at Marsh US Consumer. The session was conducted as a panel discussion and focused on how insurers can leverage best practices to mitigate risk while enabling rapid product innovation through a modern policy administration system. The panelists offered insight into business and technical challenges for both Life & Annuity and Property & Casualty carriers. The session had three primary learning objectives: Identifying how replacing a legacy system with a more modern policy administration solution can deliver agility and growth Identifying how processes and system should be re-engineered or replaced in order to improve speed-to-market and product support Uncovering how to leverage best practices to mitigate risk during a migration to a new platform Tom Kristensen, who is an industry veteran with over 20 years of experience, was able was able to offer a unique perspective as a business process outsourcer (BPO). Marsh US Consumer is currently implementing both the Oracle Insurance Policy Administration solution and the Oracle Revenue Management and Billing platform while at the same time implementing a new BPO customer. Tom offered insight on the need to replace their aging systems and Marsh's ability to drive new products and processes with a modern solution. As a best practice, their current project has empowered their business users to play a major role in both the requirements gathering and configuration phases. Tom stated that working with a modern solution has also enabled his organization to use a more agile implementation methodology and get hands-on experience with the software earlier in the project. He also indicated that Marsh was encouraged by how quickly it will be able to implement new products, which is another major advantage of a modern rules-based system. One of the more interesting issues was raised by an audience member who asked, "With all the vendor solutions available in North American and across Europe, what is going to make some of them more successful than others and help ensure their long term success?" Panelist Mike Sciole, IFG Companies suggested that carriers do their due diligence and follow a structured evaluation process focusing on vendors who demonstrate they have the "cash to invest in long term R&D" and evaluate audited annual statements for verification. Other panelists suggested that the vendor space will continue to evolve and those with a strong strategy focused on the insurance industry and a solid roadmap will likely separate themselves from the rest. The session concluded with the panelists offering advice about not being afraid to evaluate new modern systems. While migrating to a new platform can be challenging and is typically only undertaken every 15+ years by carriers, the ability to rapidly deploy and manage new products, create consistent processes to better service customers, and the ability to manage their business more effectively, transparently and securely are well worth the effort. Roger A.Soppe, CLU, LUTCF, is the Senior Director of Insurance Strategy, Oracle Insurance.

    Read the article

  • Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

    - by Robert Koritnik
    Windows 7 x64 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 R2 doesn't. Event though it's practically the same OS when it comes to drivers. I know there's a very good reason for this difference. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are usually desktop machines (a bit more powerful though) and would benefit from the whole driver spectrum that Windows 7 offers... Question I know I've been reading on the internet about some trick where you first install Windows 7, than do something to get either all Windows 7 drivers or just those installed, and then install Windows Server 2008 R2 and use those drivers of Windows 7. The thing is I can't find these instructions on the internet any more. If anybody knows where they are please provide the link for the rest of us.

    Read the article

  • AWS EC2 security group source

    - by greener
    I'm currently trying to configure a security group and allow MS SQL connections from my other instance. I want to be able to specify the security group's name as the source. But the connection is not going through. The instance's firewall has a rule to allow connections on the port. In fact, if I specify the IP of the machine as the source, it works. Just not the security group name. There are two other rules for the same port and they're for specific IPs only. What am I doing wrong?

    Read the article

  • How to config DLink DSL-2640T to allow access from DynDNS route to specific port on my PC?

    - by Greendog
    Hi, everyone. I think you can help me out from this little problem. I am trying to setup an Apache web server on my PC and let the other remotes to this machine via DynDNS.com. I found that DLink DSL-2640T make me confuse about how to configure the routing from http://myhostname.dyndns.org:80 to 192.168.1.13:80. At the moment when I browse the URL http://myhostname.dyndns.org, it will lead me to router's admin control panel. Could you help me out by giving your guideline or suggestion?

    Read the article

  • Java Spotlight Episode 103: 2012 Duke Choice Award Winners

    - by Roger Brinkley
    Our annual interview with the 2012 Duke Choice Award Winners recorded live at the JavaOne 2012. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes Events Oct 13, Devoxx 4 Kids Nederlands Oct 15-17, JAX London Oct 20, Devoxx 4 Kids Français Oct 22-23, Freescale Technology Forum - Japan, Tokyo Oct 30-Nov 1, Arm TechCon, Santa Clara Oct 31, JFall, Netherlands Nov 2-3, JMagreb, Morocco Nov 13-17, Devoxx, Belgium Feature Interview Duke Choice Award Winners 2012 - Show Presentation London Java CommunityThe second user group receiving a Duke’s Choice Award this year, the London Java Community (LJC) and its users have been active in the OpenJDK, the Java Community Process (JCP) and other efforts within the global Java community. Student Nokia Developer GroupThis year’s student winner, Ram Kashyap, is the founder and president of the Nokia Student Network, and was profiled in the “The New Java Developers” feature in the March/April 2012 issue of Java Magazine. Since then, Ram has maintained a hectic pace, graduating from the People’s Education Society Institute of Technology in Bangalore, India, while working on a Java mobile startup and training students on Java ME. Jelastic, Inc.Moving existing Java applications to the cloud can be a daunting task, but startup Jelastic, Inc. offers the first all-Java platform-as-a-service (PaaS) that enables existing Java applications to be deployed in the cloud without code changes or lock-in. NATOThe first-ever Community Choice Award goes to the MASE Integrated Console Environment (MICE) in use at NATO. Built in Java on the NetBeans platform, MICE provides a high-performance visualization environment for conducting air defense and battle-space operations. DuchessRather than focus on a specific geographic area like most Java User Groups (JUGs), Duchess fosters the participation of women in the Java community worldwide. The group has more than 500 members in 60 countries, and provides a platform through which women can connect with each other and get involved in all aspects of the Java community. AgroSense ProjectImproving farming methods to feed a hungry world is the goal of AgroSense, an open source farm information management system built in Java and the NetBeans platform. AgroSense enables farmers, agribusinesses, suppliers and others to develop modular applications that will easily exchange information through a common underlying NetBeans framework. Apache Software Foundation Hadoop ProjectThe Apache Software Foundation’s Hadoop project, written in Java, provides a framework for distributed processing of big data sets across clusters of computers, ranging from a few servers to thousands of machines. This harnessing of large data pools allows organizations to better understand and improve their business. Parleys.comE-learning specialist Parleys.com, based in Brussels, Belgium, uses Java technologies to bring online classes and full IT conferences to desktops, laptops, tablets and mobile devices. Parleys.com has hosted more than 1,700 conferences—including Devoxx and JavaOne—for more than 800,000 unique visitors. Winners not presenting at JavaOne 2012 Duke Choice Awards BOF Liquid RoboticsRobotics – Liquid Robotics is an ocean data services provider whose Wave Glider technology collects information from the world’s oceans for application in government, science and commercial applications. The organization features the “father of Java” James Gosling as its chief software architect.United Nations High Commissioner for RefugeesThe United Nations High Commissioner for Refugees (UNHCR) is on the front lines of crises around the world, from civil wars to natural disasters. To help facilitate its mission of humanitarian relief, the UNHCR has developed a light-client Java application on the NetBeans platform. The Level One registration tool enables the UNHCR to collect information on the number of refugees and their water, food, housing, health, and other needs in the field, and combines that with geocoding information from various sources. This enables the UNHCR to deliver the appropriate kind and amount of assistance where it is needed.

    Read the article

  • Symmetrix gatekeepers on Solaris 10

    - by Milner
    I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

    Read the article

< Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >