Search Results

Search found 25039 results on 1002 pages for 'machine learning'.

Page 628/1002 | < Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >

  • Ubuntu not connecting to network in Hyper-V

    - by soandos
    I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

    Read the article

  • Can't log in using sa account for sql server 2008

    - by tessa
    I installed SQL Server 2008. During the install I set it to mixed mode authentication and set the password for what I assume is the sa account. In the configuration manager I set tcp/ip and named pipes to enabled. When I open SQL Server Management Studio and try to log in - username: sa, password: whatIjustsetintheinstall, it fails with the error: Login failed for user sa. (error 18456). The error in Event Viewer is - Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]. I know the password is right because I just set it. What am I doing wrong here? Is sa not the right user to be logging in with mixed mode? I've been reading through forum after forum but just cannot find anything that works.

    Read the article

  • XFCE: active panel buttons when mouse is on screen edge

    - by Dave Vogt
    I'm using XFCE 4.6.1 (Xubuntu distribution) on my laptop and main computer; the settings are approximately the same. so far for the intro. What I'm experiencing is that when going to the screen edge over the task bar on the laptop, the button under the mouse is active. On the main machine however, having the mouse on the screen edge, the button below it doesn't react at all! Only if I move the pointer towards the center a bit, the hover highlight starts and the button becomes clickable. I've tried to change the panel size, desktop theme and a few other settings, but none seems to cure that problem. Is there something that causes this problem? (Googling also seems to give no results)

    Read the article

  • Incredibly high latency for Ubuntu guest on Hyper-V

    - by Mark Henderson
    I've got several Ubuntu 10.04 virtual machines running as Hyper-V guests on Windows Server 2008 R2 SP1 and they're all perfectly fine. Today I installed my first Ubuntu 11.10 virtual machine and I'm seeing rediculous pings: These servers are all connected via gigabit to a local LAN, with almost no network traffic at all1, with a legacy network adapter in Hyper-V. I'm a bit of an Ubuntu n00b so I don't really know where to go from here. Any ideas? free -m reports: total used free shared buffers cached Mem: 485 470 15 0 63 299 -/+ buffers/cache: 107 378 Swap: 507 20 487 This is within a few mb of our other Ubuntu servers that are on 10.04. I removed the Legacy NIC and installed a Synthetic one in Hyper-V and this did improve the numbers, in that they're around 10-30ms now, but I would still be expecting <1ms response times. 1As a comparison, I have another Ubuntu 10.04 guest on Hyper-V almost 1,000km away that has a ping of 33ms

    Read the article

  • Is there any way to stop a window's title bar merging with the panel when maximised?

    - by Richard Turner
    I'm working on a desktop machine with plenty of screen real-estate, so I don't need my windows' title bars to merge with the global menu bar when the windows are maximised. Moreover, I'm working on a dual-screen set-up, so the fact that a window is maximised doesn't mean that it's the only window visible. Before Unity I'd switch to a maximised window by clicking on its title bar, or close the window, even though it isn't focused, by clicking on its close button; I can no longer do this because the title bar is missing and the global menu bar is empty on that screen. This isn't a huge problem - I can click on some of the window's chrome to focus it - but it's unintuitive and it's forcing me to relearn my mousing behaviour. I'd like to turn-off the merging of title and global menu bars, but how? EDIT: I simply want the title bar of the window NOT to merge with the top panel whenever I maximize a Window. The global menu should stay in the top panel as far as I am concerned. Current it maximizes like this I want it to maximize like this (In that screeny the unmaximized Window has been resized to take rest of the space)

    Read the article

  • Using WSUS to update machines not on the domain

    - by Arcath
    I have a WSUS server providing updates for for the computers on my domain. We also bring allot of machines back to our office and run windows update on them as build image, this means that we end up downloading the same updates over and over again. Is there anyway to get a machine to download its updates from our WSUS Server? i found that theres something running on port 8530 but its just an empty document, in fact every folder listed in IIS config returns a blank document anyone know if this is possible? and how i would do it?

    Read the article

  • Can it be harmful to grant jackd realtime priority?

    - by SuperElectric
    I am apt-get installing Ardour, a sound mixing program, just to try it out. Installing Ardour also installs JACK, a dependency. As part of the JACK installation script, I get the following dialog: If you want to run jackd with realtime priorities, the user starting jackd needs realtime permissions. Accept this option to create the file /etc/security/limits.d/audio.conf, granting realtime priority and memlock privileges to the audio group. Running jackd with realtime priority minimizes latency, but may lead to complete system lock-ups by requesting all the available physical system memory, which is unacceptable in multi-user environments. Enable realtime process priority? I'm installing on my laptop, which never has multiple simultaneous users. I still have concerns: is JACK something that'll be used by the system itself to play any sound (i.e. will it replace ALSA)? If so, does that mean that if I enable realtime priority for JACK, I'll run a slight risk of freezing the machine whenever any sound is played? Or is JACK only going to be used by Ardour for now (until I install some other JACK-dependent program)? Thanks, -- Matt

    Read the article

  • Rackspace Cloud Servers in Europe?

    - by mit
    We have setup a cloud virtual server at rackspace in the US, but we use it from Europe. I found out I am not quite happy with the response time. Of course I knew that there would be some latency. But I am not sure if it is the overseas latency (ping is 120ms) or also the minimal resources. It is the smallest machine, 256 MB, 10 GB, running a Mediawiki on Ubuntu 10.04 64 bit. The Instance lives in the rackspace ORD1 datacenter. As soon as they have opened their new facilities in the UK we plan moving the incstance there. But we are planing more machines already. The pricing is quite attractive. I don't really want to do some measuring and benchmarking and this stuff, so I am asking just for your opinions and it would be nice to hear what you can tell from your experience. Maybe someone who uses such small instances in the US. And what can we really expect if we upgrade to more resources.

    Read the article

  • Server Configuration / Important Parameter for 500Req/Second

    - by Sparsh Gupta
    I am configuring a server to be used as nginx server for a very heavy traffic website. It is expected to receive traffic from a large number of IP addresses simultaneously. It is expected to get 500Req/Second with atleast 20Million unique IPs connecting it. One of the problems I noticed in my previos server was related to iptables / ipconntrack. I am not aware of this behaviour and would be glad to know which all parameters of a ubuntu / debian (32/64) bit machine should I tweek to get maximum performance from the server. I can put in a lot of RAM on the server but mission critical task is the response times. We ideally dont want any connection to be hanging / timing out / waiting and want as low as possible overall response times. P.S. We are also looking for a kick ass freelancer system admin who can help us figuring / setting this all up. Reach me incase you have some spare time and interested in working on some very heavy traffic website servers.

    Read the article

  • How can I resize a partition managed by LVM?

    - by Mike C
    I have a fresh CentOS install on my machine and I would like to make space on the drive available in order to install Arch Linux. Unfortunately, LVM is new to me and doesn't appear to work well with gParted (on my Ubuntu 9.0 LiveCD, anyways). It always seems to treat the LVM as some unknown filesystem. I tried to use the 'lvm' utility on the LiveCD in order to resize the partition down, but I ended up somehow corrupting my filesystem (hence the fresh CentOS install). I haven't been able to find any documentation on LVM that makes much sense to me as a *nix n00b. Is there anywhere I can find some helpful documentation on LVM as well as a clear step by step on how to successfully resize a partition? Thanks, Mike

    Read the article

  • How to fix? => Your system administrator does not allow the user of saved credentials to log on to the remote computer

    - by Pure.Krome
    At our office, any of our Windows 7 Clients get this error message when we try and RDP to a remote W2K8 Server outside of the office :- Your system administrator does not allow the user of saved credentials to log on to the remote computer XXX because its identity is not fully verified. Please enter new credentials A quick google search leads to some posts they all suggest I edit group policy, etc. I'm under the impression, that the common fix for this, is to follow those instructions -per Windows7 machine-. Ack :( Is there anyway I can do something via our office Active Directory .. which auto updates all Windows 7 clients in the office LAN?

    Read the article

  • VMWare player grabbing mouse focus

    - by Bryan Rowe
    I am using the newest VMWare player on a Windows 7 machine. When I have the player open on one of my two monitors I get some weird behavior. For instance, if the player is open on monitor 2, and I minimize firefox on monitor 1, my mouse will instantly switch to the monitor 2 and be centered within the VMWare player window. This happens when I minimize any window after having been working in my VM. I hope there is a setting or tweak that I am not aware of that can remedy this. EDIT: Through more testing I have found that this only occurs when the VMWare player is full screen on either of my two monitors. Also, I found people having the exact same issue at: http://communities.vmware.com/message/1244913

    Read the article

  • AMD Phenom 2 is idling at 50°C, can I get it cooler?

    - by liam
    Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

    Read the article

  • Computer hobby and more?

    - by John
    I have been a fulltime student recently working on graduate work to complete a graduate degree. While continuing my studies I have maintained my computer hobby. However, recently my computer hobby has been threatening to turn into a full-fledged side business. Because I am starting to have people come to me for computer help who I have never met before (who generally heard word-of-mouth from other people whose computers I looked at) I am seriously considering putting my conditions for working on a computer into writing (for potential damage control and perhaps liability reasons). Are there any standards for this that I should reference? Should responsibility be waived for times when the computer is left in my care or any time I look at a machine? Any advice you can provide here would be appreciated. What other lessons have you learned that I should be aware of in relation to helping people while continuing my studies as a hobby? Thank you in advance.

    Read the article

  • Guide for installing Zenoss remote SSH monitoring plugin for Ubuntu

    - by normalocity
    I'm trying out Zenoss. I got it to monitor a test machine via SNMP - that was easy enough. Now I want to add another server that is remote, and I want to use the SSH plugin. I've been using this guide, but it skips a few steps for non-RedHat systems. I'm on Ubuntu. The steps I have down so far are: Install alien Convert the .rpm to a .deb file Use dpkg to install teh .deb file My issue: where to get the .rpm file in the first place?

    Read the article

  • Assigning static IP and domain name mapping to local server in LAN

    - by yashbinani
    I have developed a web application which will be deployed in a LAN environemnt. Clients will be Computers/Android Tablets/IPAD In order for communication between client and local server 1) need to assign a static IP to local server. 2) need a domian name mapping for that IP address in Local environment. 3) router should assign the same static IP if it gets restarted etc. I am using a windows XP machine as Local server OS. Do i need to take care of router configurations before buying one, or all routers will have same capability to perform this task. I am not a network specialist, so Sorry if this question sounds stupid. Thanks

    Read the article

  • Unreal Tournament 3 vs UDK: What Should I Choose?

    - by Matt Christian
    Many people in the mod community were very excited to see the release of the Unreal Developer Kit (UDK) a few months ago.  Along with generating excitement into a very dedicated community, it also introduced many new modders into a flourishing area of indie-development.  However, since UDK is free, most beginners jump right into UDK, which is OK though you might just benefit more from purchasing a shelf-copy of Unreal Tournament 3. UDK UDK is a free full version of UnrealEd (the editor environment used to create games like Gears of War 1/2, Bioshock 1/2, and of course Unreal Tournament 3).  The editor gives you all the features of the editor from the shelf-copy of the game plus some refinements in many of the tools.  (One of the first things you'll find about UnrealEd is that it's a collection of tools grouped into the same editor so it really isn't a single 'tool') Interestingly enough, Epic is allowing you to sell any game made in UDK with a few catches.  First off, you must purchase a liscense for your game (which, I THINK is aproximately $99 starting).  Secondly, you must pay 25% of all profits for the first $5,000 of your game revenue to them (about $1250).  Finally, you cannot use any of the 'media' provided in UDK for your game.  UDK provides sample meshes, textures, materials, sounds, and other sample pieces of media pulled (mostly) from Unreal Tournament 3. The final point here will really determine whether you should use UDK.  There is a very small amount of media provided in UDK for someone to go in and begin creating levels without first developing your own meshes, textures, and other media.  Sure, you can slap together a few unique levels, though you will end up finding yourself restriced to the same items over and over and over.  This is absolutely how professional game development is; you are 'given' (typically liscensed or built in-house) an engine/editor and you begin creating all the content for the game and placing it.  UDK is aimed toward those who really want to build their game content from scratch with a currently existing engine.  It is not suited for someone who would like to simply build levels and quick mods without learning external 3D programs and image editing software. Unreal Tournament 3 Unless you have a serious grudge against FPS's, Epic, or your computer sucks, there really is no reason not to own this game for PC.  You can pick it up on Steam or Amazon for around $20 brand new.  Not only are you provided with a full single-player and multiplayer game, but you are given the entire UnrealEd 3.0 including all of the content used to build UT3.  If you want to start building levels and mods quickly for UT3, you should absolutely pick up a shelf-copy. However, as off-the-shelf UT3 is a few years old now, the tools have not been updated for quite a while.  Compared to UDK, the menus are more difficult to navigate through and take more time getting used to.  Since UDK is updated almost every month, there are new inclusions to the editor that may not be in UT3 (including the future addition of 3D!).  I haven't worked enough with shelf UT3 to see if there are more features in UDK or if they both feature the same stuff in different forms, however you should remember that the Unreal Engine 3.0 has undergone numerous upgrades between it's launch and Gears of War 2 (in fact, Epic had a conference to show off what changed just between the Gears of Wars games). Since UT3 has much more core content, someone who wants to focus on level editing or modding the core UT3 game may find their needs better suited with an off-the-shelf copy of UT3.  If that level designer has a team that is generating custom assets, they may be better off with UDK. The choice is now yours...

    Read the article

  • Print server not being recognized after switching router and upgrading to 64 bit

    - by picardo
    I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

    Read the article

  • Cyrus IMAP: Unable to connect to remote host: Connection refused

    - by Nick
    I'm working on setting up a Cyrus 2.2 IMAP server on Ubuntu Server 9.04. If I telnet from the server itself: # telnet localhost imap I get: * OK IMAP Cyrus IMAP4 v2.2.13-Debian-2.2.13-14ubuntu3 server ready Which is what I should be seeing. If I try from another machine on the network: telnet 192.168.5.122 imap I get: telnet: Unable to connect to remote host: Connection refused To the best of my knowledge, there is no firewall running on the box. I've tried restarting the saslauthd and cyrus2.2 daemons, with no effect. What else can I try?

    Read the article

  • issue when promoting a second server as domain on r2 2008

    - by Mouradb
    Hello, I'm in an odd situatuion here, I've upgraded my network to a 2008 domain from a 2003 with out any issue, this works fine and all the FSMO are in one DC, I was about to install a second domain on a 2008R2 and this error is coming up again and again. I The problem is I keep getting an area telling me that I need to run adprep /domainPrep /forestPrep, but when I run it on the First DC, it tells me this has already been run and updated and it is aborted. Does anyone have any ideas on why I can't add a Server 2008 machine as a domain controller?

    Read the article

  • Single-Purpose SSH account, exclusively for Reverse Port Forwarding

    - by drfloob
    On my Debian system, I'd like to create a user that is only allowed to do a Reverse Port Forward from their machine to my server, but I'm not sure how to create a limited user specifically for this purpose. For example, we'll call my server 'Sam' and my laptop 'Luke'. I'd like a user on Luke to be able to execute a reverse port forward ssh command to Sam, so that port 4321 on Sam is tunneled to port 4321 on Luke. For example: ssh -fnR 4321:localhost:4321 -l limitedUser Sam How can I create a user on Sam that is only allowed to execute this command?

    Read the article

  • Windows XP Installation issue - cannot find hard disk

    - by Marco
    A friend of mine gave me a laptop with Windows 8 installed and nothing else. I don't like it so I am trying to remove it by installing Windows XP. I have a windows XP installation CD that I have used before and worked fine, but didn't work when I tried to install it on the Windows 8 machine. It keeps telling me I don't have a drive to install to. Then I log into Windows 8 again and install check partitions. I found 2 and tried to make a new one but it will only let me make one of 69mb. Next, I tied to find a way to go back to XP with BCD install and try to set the boot loader for XP but it wasnt there. Somehow I deleted the bootloader for Windows 8 and now it asks me for a recovery tool for media. I am not familiar with the laptop specs, but it is a Toshiba with about 250GB storage, and above 1GHz processor.

    Read the article

  • Windows Server 2008 Standard vs. Web

    - by Andreas
    I'm currently comparing Windows Server 2008 versions to see what to use. What i found is this, that might affect me: RAM: 32GB. (the same) Sockets: 4 (the same) Remote Desktop: 2 (the same) IIS: true (the same) Application Server: Only standard. I will run my server as a single CPU (4 core) 8GB RAM, 2x raid1 web-server running: IIS Asp.net .Net 4 Third part mail server. (Only for sending mail from my web-application) SQL Server Express (My data is not more then 10 GB) Some minor applications for import and export of data. I might use external load balancer if I install a second machine in the future. My question is if you see any reason for me to go for standard that is 4 x price compared to web. BR Andreas

    Read the article

  • IPSEC Windows 2008 <--> Fortinet 60B

    - by Elijah Glover
    I am trying to establish a IPSEC vpn, between an office DSL connection and a single virtual machine. I have done hub-spoke stuff before with cisco and fortinet routers, never hardware <-- software. Fortigate 60B - 10.20.1.1/24 Windows Server 2008 r2 Installed On VM I have seen some guides, to do this with juniper screenos (guide uses first release of 2008, they introduced windows firewall with advanced security), but none using fortinet equipment. Anyone ever been successful? Or should I install RAS/PPTP, so I can dial in?

    Read the article

  • Mirror virtualized development environment

    - by David Casillas
    I work alone in some iOS projects in a local environment. I have been thinking in a way to be able to share my development environment between my Mac Mini and my MacBook. I mostly work at home in the Mini but sometimes I need to do a demo or work outside and I would like to have the development environment mirrored in both. I have think in using a virtual machine (via VirtualBox) with just my development tools instaled. Then I could synchronize that VM with some software between both computers so I will always have the exact environment no matter what computer I use. Is there any good reason not do do this way? I have not used Virtualization to much so I have no background on the subject. My basic setup will be: Mac Mini: i7 dual Core, 8Gb. OSX Mountain Lion Host OS: MacBook: 2.4 Core 2 Duo. 4Gb. OSX Lion Host OS. Virtual Box with Mountain Lion guest OS in both machines. XCode5, Simulator.

    Read the article

< Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >