Search Results

Search found 39047 results on 1562 pages for 'process control'.

Page 629/1562 | < Previous Page | 625 626 627 628 629 630 631 632 633 634 635 636  | Next Page >

• What type of data store should I use for my ios app?

  - by mwiederrecht

  I am pretty new to ios and using servers so forgive me. I am building an ios app for research. I need to monitor things that the user does and then push it up to a server for analysis (yes, with user and IRB permission). On the client's side I need to keep quite a bit of data that won't really change except in the case of pulling an updated version from the server, and then a minimal amount of user-specific data. Most of the data I will collect needs to be pushed to a server for analysis and then can be deleted from the client side. I am struggling to figure out what kind of data store I need to use, especially since I am not quite sure how the pushing and pulling from the server process works yet. Does it make sense to use Core Data? XML? SQLite? I like the Core Data idea, but I am not sure what kind of problems I will run into when I need to send large amounts of data to it and from it from the server. I imagine I might need to send data in a different form than it is probably stored in on either end - so what kind of overhead am I likely to run into in the process of converting that data? Is there a good format to save stuff in that would work well for me on both ends AND for sending the data? As you can probably tell, I could use some advice. Thanks!

  Read the article

• extending the delphi TEditCopy action to also copy listbox items to clipboard

  - by PA

  I have a form with most of its functionality implemented using standard TAction. I have a menu, a toolbar, and some toobuttons. I have implemented clipboard copy/paste with no code at all, just using TEditCopy and TEditPaste actions. It works perfect in the TEdit and TMemo boxes I have. Now, I want it to work with TListBox, too. Specifically, I want to be able to copy the selected list item in a TListBox using the very same menuitems, key shortcuts and toolbuttons. So, I believe I will need to extend the TEditCopy Action. But it doesn't seem very straight forward to me. In particular, the TEditAction checks for the focused control to be a TCustomEdit control, which a TListBox it is not. I am a little affraid that it will be just too much work. The obvious alternative is to just forget about the standard actions and implement the copy to clipbard in the OnExecute method of a generic TAction. But, before giving up, do you have some idea, hint or trick that would help me extend the standard TEditCopy action?

  Read the article

• How to handle 30k files in a project which requires them?

  - by Jeremiah

  Visual Studio 2010 RC - Silverlight Application We have a library of images that we need to have access to. They are given to us from a vendor (through an installer) and they are not in a database, they are files in a folder (a very large monster of a folder). We do not control when the images change, so the vendor needs to be able to override them individually. We get updates frequently enough from this vendor to state that these images change "randomly" and without our (programmer) knowledge. The problem: I don't want 30K images in SVN. Heck, I don't even want to imagine them in my Solution. However, our application requires them in order to run properly. So, our build/staging servers need access to these images (we have two build servers). The Question: How would you handle it when your application will not work as specified without access to each of 30k images and you don't control when those images change? I'm do not want to have a crazy large SVN repository. Because I don't know when any of these images change, I really don't want them in my solution (definitely do not want a large solution, either). I also don't want a bunch of manual steps to do every time these images change. Our mantra, up to this point, has always been, any developer could download from SVN, compile and run our app. These images are going to kill that mantra. I'm tempted to make a WCF service that will return images if they exist and a dummy image if they don't. This way all dev boxes will return a dummy image and our build/staging/production boxes will return real images (ones that actually have the vendor's image installer installed on). This has to be a solved problem. What have other people done to handle these types of problems? I'm open to suggestions.

  Read the article

• Custom android preference type loses focus when typing

  - by Brian

  I created a simple preference class that shows an AutoCompleteTextView control and it displays properly but when i focus on the AutoCompleteTextView and start typing it brings up the keyboard but then immediately loses focus on the control. Any idea why this loses focus? Here's what i did to create the view. the inflated layout is just a basic linear layout with a title textview in it. I could change it to a dialog preference instead I guess but it'd be smoother if it could be part of the base view. @Override protected View onCreateView(ViewGroup parent) { LayoutInflater inflater = (LayoutInflater) getContext().getSystemService(Context.LAYOUT_INFLATER_SERVICE); LinearLayout layout = (LinearLayout) inflater.inflate(R.layout.base_preference, null); if (mHint != null) { TextView hintView = (TextView) layout.findViewById(R.id.PreferenceHintTextView); hintView.setText(mHint); } TextView titleView = (TextView) layout.findViewById(R.id.PreferenceTitleTextView); titleView.setText(getTitle()); AutoCompleteTextView inputView = new AutoCompleteTextView(getContext()); inputView.setGravity(Gravity.FILL_HORIZONTAL); ArrayAdapter<CharSequence> adapter = new ArrayAdapter<CharSequence>(getContext(), R.layout.auto_complete_text_list_item, getEntries()); inputView.setAdapter(adapter); inputView.setThreshold(1); inputView.setOnItemSelectedListener(this); layout.addView(inputView); return layout; }

  Read the article

• Named pipe stalls threads?

  - by entens

  I am attempting to push updates into a process via a named pipe, but in doing so my process loop now seams to stall on while ((line = sr.ReadLine()) != null). I'm a little mystified as to what might be wrong as this is my first foray into named pipes. void RefreshThread() { using (NamedPipeServerStream pipeStream = new NamedPipeServerStream("processPipe", PipeDirection.In)) { pipeStream.WaitForConnection(); using (StreamReader sr = new StreamReader(pipeStream)) { for (; ; ) { if (StopThread == true) { StopThread = false; return; // exit loop and terminate the thread } // push update for heartbeat int HeartbeatHandle = ItemDictionary["Info.Heartbeat"]; int HeartbeatValue = (int)Config.Items[HeartbeatHandle].Value; Config.Items[HeartbeatHandle].Value = ++HeartbeatValue; SetItemValue(HeartbeatHandle, HeartbeatValue, (short)0xC0, DateTime.Now); string line = null; while ((line = sr.ReadLine()) != null) { // line is in the format: item, value, timestamp string[] parts = line.Split(','); // push update and store value in item cache int handle = ItemDictionary[parts[0]]; object value = parts[1]; Config.Items[handle].Value = int.Parse(value); DateTime timestamp = DateTime.FromBinary(long.Parse(parts[2])); SetItemValue(handle, value, (short)0xC0, timestamp); } Thread.Sleep(500); } } } }

  Read the article

• I want to prevent ASP.NET GridView from reacting to the enter button

  - by StephaneT

  I have an ASP.NET page with a gridview control on it with a CommandButton column with delete and select commands active. Pressing the enter key causes the first command button in the gridview to fire, which deletes a row. I don't want this to happen. Can I change the gridview control in a way that it does not react anymore to pressing the enter key? There is a textbox and button on the screen as well. They don't need to be responsive to hitting enter, but you must be able to fill in the textbox. Currently we popup a confirmation dialog to prevent accidental deletes, but we need something better than this. This is the markup for the gridview, as you can see it's inside an asp.net updatepanel (i forgot to mention that, sorry): (I left out most columns and the formatting) <asp:UpdatePanel ID="upContent" runat="server" UpdateMode="Conditional"> <Triggers> <asp:AsyncPostBackTrigger ControlID="btnFilter" /> <asp:AsyncPostBackTrigger ControlID="btnEdit" EventName="Click" /> </Triggers> <ContentTemplate> <div id="CodeGrid" class="Grid"> <asp:GridView ID="dgCode" runat="server"> <Columns> <asp:CommandField SelectImageUrl="~/Images/Select.GIF" ShowSelectButton="True" ButtonType="Image" CancelText="" EditText="" InsertText="" NewText="" UpdateText="" DeleteImageUrl="~/Images/Delete.GIF" ShowDeleteButton="True" /> <asp:BoundField DataField="Id" HeaderText="ID" Visible="False" /> </Columns> </asp:GridView> </div> </ContentTemplate> </asp:UpdatePanel>

  Read the article

• Span with white-space style in IE (7) applied _past_ end of span

  - by WaldenL

  We've got an application where users can enter "notes" into a rich edit control (Telerik's RedEditor, but that doesn't matter here). We had a user enter notes from w/in Safari that had a <span></span> in the middle of the note, and that span had a style on it specifying white-space:pre The HTML of the note was in the form of: <div> This is a note <span class="Apple-tab-span" style="white-space: pre; "> </span> and here's more of the note. </div> Simple enough, the style should apply to the span, and the span had 4 spaces in it. There should have been 4 spaces in the resulting output. Here's the problem. IE seems to apply that white-space: pre; style not only to the span, but to the enclosing div! Therefore, this long line that should have wrapped since it's not in the span, now pushed the document out until the line fits on the page. What am I missing. I know IE has problems, but this doesn't seem right, even for IE. So, the question(s): 1) Am I correct that the white-space attribute should only have applied to the span? 2) Can this be resolved somehow? Remember, I'm not in control of the content being entered. And it's entered from a mac w/Safari and being viewed in IE. Edit: The doctype on the page in question is: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

  Read the article

• How do I redirect standard output to a file in Perl? [closed]

  - by rockyurock

  I want to send standard output to the file "my_output.txt" but failed. Here's the output: inside value loop ------------------------------------------------------------ Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 108 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.16.2 port 5001 connected with 192.168.16.1 port 3189 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 3] 0.0- 5.0 sec 2.14 MBytes 3.61 Mbits/sec 0.369 ms 0/ 1528 (0%) inside value loop3 clue1 clue2 inside value loop4 one iperf completed *************************************** When I enable the local *STDOUT; in below code then I could see the above output on command prompt display (ofcourse server is sending some data): my $file = 'my_output.txt'; use Win32::Process; print"inside value loop\n"; # redirect stdout to a file #local *STDOUT; open STDOUT, '>', $file or die "can't redirect STDOUT to <$file> $!"; Win32::Process::Create(my $ProcessObj, "D:\\IOT_AUTOMATION_UTILITY\\_SATURDAY_09-04-10\\adb_cmd.bat", "adb shell /data/app/iperf -u -s -p 5001", 0, NORMAL_PRIORITY_CLASS, ".") || die ErrorReport(); #$alarm_time = $IPERF_RUN_TIME+10; #20sec #$ProcessObj->Wait(40); #print"inside value loop2\n"; #sleep $alarm_time; sleep 40; $ProcessObj->Kill(0); sub ErrorReport{ print Win32::FormatMessage( Win32::GetLastError() ); }

  Read the article

• Information about PTE's (Page Table Entries) in Windows

  - by Patrick

  In order to find more easily buffer overflows I am changing our custom memory allocator so that it allocates a full 4KB page instead of only the wanted number of bytes. Then I change the page protection and size so that if the caller writes before or after its allocated piece of memory, the application immediately crashes. Problem is that although I have enough memory, the application never starts up completely because it runs out of memory. This has two causes: since every allocation needs 4 KB, we probably reach the 2 GB limit very soon. This problem could be solved if I would make a 64-bit executable (didn't try it yet). even when I only need a few hundreds of megabytes, the allocations fail at a certain moment. The second problem is the biggest one, and I think it's related to the maximum number of PTE's (page table entries, which store information on how Virtual Memory is mapped to physical memory, and whether pages should be read-only or not) you can have in a process. My questions (or a cry-for-tips): Where can I find information about the maximum number of PTE's in a process? Is this different (higher) for 64-bit systems/applications or not? Can the number of PTE's be configured in the application or in Windows? Thanks, Patrick PS. note for those who will try to argument that you shouldn't write your own memory manager: My application is rather specific so I really want full control over memory management (can't give any more details) Last week we had a memory overwrite which we couldn't find using the standard C++ allocator and the debugging functionality of the C/C++ run time (it only said "block corrupt" minutes after the actual corruption") We also tried standard Windows utilities (like GFLAGS, ...) but they slowed down the application by a factor of 100, and couldn't find the exact position of the overwrite either We also tried the "Full Page Heap" functionality of Application Verifier, but then the application doesn't start up either (probably also running out of PTE's)

  Read the article

• Scalably processing large amount of comlpicated database data in PHP, many times a day.

  - by Eph

  I'm soon to be working on a project that poses a problem for me. It's going to require, at regular intervals throughout the day, processing tens of thousands of records, potentially over a million. Processing is going to involve several (potentially complicated) formulas and the generation of several random factors, writing some new data to a separate table, and updating the original records with some results. This needs to occur for all records, ideally, every three hours. Each new user to the site will be adding between 50 and 500 records that need to be processed in such a fashion, so the number will not be steady. The code hasn't been written, yet, as I'm still in the design process, mostly because of this issue. I know I'm going to need to use cron jobs, but I'm concerned that processing records of this size may cause the site to freeze up, perform slowly, or just piss off my hosting company every three hours. I'd like to know if anyone has any experience or tips on similar subjects? I've never worked at this magnitude before, and for all I know, this will be trivial to the server and not pose much of an issue. As long as ALL records are processed before the next three hour period occurs, I don't care if they aren't processed simultaneously (though, ideally, all records belonging to a specific user should be processed in the same batch), so I've been wondering if I should process in batches every 5 minutes, 15 minutes, hour, whatever works, and how best to approach this (and make it scalable in a way that is fair to all users)?

  Read the article

• Freeing of allocated memory in Solaris/Linux

  - by user355159

  Hi, I have written a small program and compiled it under Solaris/Linux platform to measure the performance of applying this code to my application. The program is written in such a way, initially using sbrk(0) system call, i have taken base address of the heap region. After that i have allocated an 1.5GB of memory using malloc system call, Then i used memcpy system call to copy 1.5GB of content to the allocated memory area. Then, I freed the allocated memory. After freeing, i used again sbrk(0) system call to view the heap size. This is where i little confused. In solaris, eventhough, i freed the memory allocated (of nearly 1.5GB) the heap size of the process is huge. But i run the same application in linux, after freeing, i found that the heap size of the process is equal to the size of the heap memory before allocation of 1.5GB. I know Solaris does not frees memory immediately, but i don't know how to tune the solaris kernel to immediately free the memory after free() system call. Also, please explain why the same problem does not comes under Linux? Can anyone help me out of this? Thanks, Santhosh.

  Read the article

• Activator.CreateInstance uses a huge amount of memory

  - by Marco

  I have been playing a bit with Silverlight and try to port my Silverlight 3.0 application to Silverlight 4.0. My application loads different XAP files and upon a user request create an instance of a Xaml user control and adds it to the main container, in a sort of MEF approach in order I can have an extensible and pluggable application. The application is pretty huge and to keep acceptable the performances and the initial loading I have built up some helper classes to load in the background all pages and user controls that might be used later on. On Silverlight 3.0 everything was running smoothly without any problem so far. Switching to SL 4.0 I have noticed that when the process approaches to create the instances of the user controls using Activator.CreateInstance, the layout freezes unexpectedly for a minute and sometimes for more. Looking at the task manager the memory usage of IE jumps from 50MB to 400MB and sometimes to 1.5 GB. If the process won't take that much the layout is rendered properly and the memory falls back to 50 MB. Otherwise everything crashes due to out of memory exeption. Does anybody encountered the same problem? Or has anybody a solution about this tricky issue?

  Read the article

• Framework or tool for "distributed unit testing"?

  - by user262646

  Is there any tool or framework able to make it easier to test distributed software written in Java? My system under test is a peer-to-peer software, and I'd like to perform testing using something like PNUnit, but with Java instead of .Net. The system under test is a framework I'm developing to build P2P applications. It uses JXTA as a lower subsystem, trying to hide some complexities of it. It's currently an academic project, so I'm pursuing simplicity at this moment. In my test, I want to demonstrate that a peer (running in its own process, possibly with multiple threads) can discover another one (running in another process or even another machine) and that they can exchange a few messages. I'm not using mocks nor stubs because I need to see both sides working simultaneously. I realize that some kind of coordination mechanism is needed, and PNUnit seems to be able to do that. I've bumped into some initiatives like Pisces, which "aims to provide a distributed testing environment that extends JUnit, giving the developer/tester an ability to run remote JUnits and create complex test suites that are composed of several remote JUnit tests running in parallel or serially", but this project and a few others I have found seem to be long dead.

  Read the article

• Is there a better way to keep track of session variable creation/access throughout different pages?

  - by Brandon

  Here's what I am working on. At my website I have multiple processes with each one containing multiple steps. Now in one of the processes, there is an error checking routine executed before proceeding to the next step of that process. A session var is set indicating the error status and it will either redirect back to the referrer or display the next page's contents. Now this kind of functionality, I believe, is common throughout web development. The issue that is occurring is that session vars are left around and are not being cleaned up properly. At times this introduces undesired behavior. My website is growing and I find that I am requiring more and more session vars to keep track of different system and error states. So I was thinking about creating a kind of "session variable keeper" to keep track of session var usage. The idea is fairly simple. It will have the notion of a context (e.g. registration process) and allow access to a predefined set of session vars within that context. In addition, the var and context will be paired with an action to proceed to some form of event handling. So if you haven't noticed I'm new to web development. Any thoughts or comments on the idea that I am proposing would be greatly appreciated. The back-end is written in PHP/MySQL.

  Read the article

• Problems with Unity BuildUp Method

  - by Voice

  Hi everybody) I'm using Unity App Block for my project (version 1.2.0.0). I have a problem with Unity Container BuildUp method which I'm using for my ascx controls. Here is some code (that's pretty simple) public class BaseUserControl<T>:UserControl where T:class { protected override void OnInit(EventArgs e) { InjectDependencies(); base.OnInit(e); } protected virtual void InjectDependencies() { var context = HttpContext.Current; if (context == null) { return; } var accessor = context.ApplicationInstance as IContainerAccessor; if (accessor == null) { return; } var container = accessor.Container; if (container == null) { throw new InvalidOperationException("No Unity container found"); } container.BuildUp<T>(this as T); } } This method is called in base control for ascx controls in my solution. And here the property that should be injected in child control: [Dependency] private IStock Stock { get; set; } So after buildup Stock property is still empty. Resolve method works fine for IStock with the same container and configuration. I've tried buildup with simple test class with only one property IStock and got the same result. So what can be wrong with buildup?

  Read the article

• Get type of the parameter from list of objects, templates, C++

  - by CrocodileDundee

  This question follows to my previous question Get type of the parameter, templates, C++ There is the following data structure: Object1.h template <class T> class Object1 { private: T a1; T a2; public: T getA1() {return a1;} typedef T type; }; Object2.h template <class T> class Object2: public Object1 <T> { private: T b1; T b2; public: T getB1() {return b1;} } List.h template <typename Item> struct TList { typedef std::vector <Item> Type; }; template <typename Item> class List { private: typename TList <Item>::Type items; }; Is there any way how to get type T of an object from the list of objects (i.e. Object is not a direct parameter of the function but a template parameter)? template <class Object> void process (List <Object> *objects) { typename Object::type a1 = objects[0].getA1(); // g++ error: 'Object1<double>*' is not a class, struct, or union type } But his construction works (i.e. Object represents a parameter of the function) template <class Object> void process (Object *o1) { typename Object::type a1 = o1.getA1(); // OK }

  Read the article

• Display Consistent Value of an Item using MVVM and WPF

  - by Blake Blackwell

  In my list view control (or any other WPF control that will fit the situation), I would like to have one TextBlock that stays consistent for all items while another TextBlock that changes based on the value in the ObservableCollection. Here is how my code is currently laid out: XAML <ListView ItemsSource="{Binding Path=MyItems, Mode=TwoWay}"> <ListView.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock x:Name="StrVal" Text="{Binding StrVal}" /> <TextBlock x:Name="ConstVal" Text="{Binding MyVM.ConstVal}" /> </StackPanel> </DataTemplate> </ListView.ItemTemplate> </ListView> Model public class MyItem { public string StrVal { get; set; } } ViewModel public class MyVM { public MyVM() { ObservableCollection<MyItem> myItems = new ObservableCollection<MyItem>(); for (int i = 0 ; i < 10; i++) myItems.Add(new MyItem { StrVal = i.ToString()}); MyItems = myItems; ConstVal = "1"; } public string ConstVal { get; set; } public ObservableCollection<MyItem> MyItems { get; set; } } Code Behind this.DataContext = new MyVM(); The StrVal property repeats correctly in the ListView, but the ConstVal TextBlock does not show the ConstVal that is contained in the VM. I would guess that this is because the ItemsSource of the ListView is MyItems and I can't reference other variables outside of what is contained in the MyItems. My question is: How do I get ConstVal to show the value in the ViewModel for all listviewitems that will be controlled by the Observable Collection of MyItems.

  Read the article

• Should I *always* import my file references into the database in drupal?

  - by sprugman

  I have a cck type with an image field, and a unique_id text field. The file name of the image is based on the unique_id. All of the content, including the image itself is being generated automatically via another process, and I'm parsing what that generates into nodes. Rather than creating separate fields for the id and the image, and doing an official import of the image into the files table, I'm tempted to only create the id field and create the file reference in the theme layer. I can think of pros and cons: 1) Theme Layer Approach Pros: makes the import process much less complex don't have to worry about syncing the db with the file system as things change more flexible -- I can move my images around more easily if I want Cons: maybe not as much The Drupal Way™ not as pure -- I'll wind up with more logic on the theme side. 2) Import Approach Pros: import method is required if we ever wanted to make the files private (we won't.) safer? Maybe I'll know if there's a problem with the image at import time, rather than view time. Since I'll be bulk importing, that might make a difference. if I delete a node through the admin interface, drupal might be able to delete the file for me, as well. Con: more complex import and maintenance All else being equal, simpler is always better, so I'm leaning toward #1. Are there any other issues I'm missing? (Since this is an open ended question, I guess I'll make it a community wiki, whatever that means.)

  Read the article

• Compile C++ in Visual Studio

  - by Kasun

  Hi All.. I use this method to compile C++ file in VS. But even i provide the correct file it returns false. Can any one help me... This is class called CL class CL { private const string clexe = @"cl.exe"; private const string exe = "Test.exe", file = "test.cpp"; private string args; public CL(String[] args) { this.args = String.Join(" ", args); this.args += (args.Length > 0 ? " " : "") + "/Fe" + exe + " " + file; } public Boolean Compile(String content, ref string errors) { if (File.Exists(exe)) File.Delete(exe); if (File.Exists(file)) File.Delete(file); File.WriteAllText(file, content); Process proc = new Process(); proc.StartInfo.UseShellExecute = false; proc.StartInfo.RedirectStandardOutput = true; proc.StartInfo.RedirectStandardError = true; proc.StartInfo.FileName = clexe; proc.StartInfo.Arguments = this.args; proc.StartInfo.CreateNoWindow = true; proc.Start(); //errors += proc.StandardError.ReadToEnd(); errors += proc.StandardOutput.ReadToEnd(); proc.WaitForExit(); bool success = File.Exists(exe); return success; } } This is my button click event private void button1_Click(object sender, EventArgs e) { string content = "#include <stdio.h>\nmain(){\nprintf(\"Hello world\");\n}\n"; string errors = ""; CL k = new CL(new string[] { }); if (k.Compile(content, ref errors)) Console.WriteLine("Success!"); else MessageBox.Show("Errors are : ", errors); }

  Read the article

• Procesing 16bit sample audio

  - by user2431088

  Right now i have an audio file (2 Channels, 44.1kHz Sample Rate, 16bit Sample size, WAV) I would like to pass it into this method but i am not sure of any way to convert the WAV file to a byte array. /// <summary> /// Process 16 bit sample /// </summary> /// <param name="wave"></param> public void Process(ref byte[] wave) { _waveLeft = new double[wave.Length / 4]; _waveRight = new double[wave.Length / 4]; if (_isTest == false) { // Split out channels from sample int h = 0; for (int i = 0; i < wave.Length; i += 4) { _waveLeft[h] = (double)BitConverter.ToInt16(wave, i); _waveRight[h] = (double)BitConverter.ToInt16(wave, i + 2); h++; } } else { // Generate artificial sample for testing _signalGenerator = new SignalGenerator(); _signalGenerator.SetWaveform("Sine"); _signalGenerator.SetSamplingRate(44100); _signalGenerator.SetSamples(16384); _signalGenerator.SetFrequency(5000); _signalGenerator.SetAmplitude(32768); _waveLeft = _signalGenerator.GenerateSignal(); _waveRight = _signalGenerator.GenerateSignal(); } // Generate frequency domain data in decibels _fftLeft = FourierTransform.FFTDb(ref _waveLeft); _fftRight = FourierTransform.FFTDb(ref _waveRight); }

  Read the article

• Django | passing form values

  - by MMRUser

  I want to create a user sign up process that requires two different forms with the same data one (1st form) is for filling out the data and other one (2nd form) is for displaying the filled data as a summery (before actually saving the data) so then user can view what he/she has filled up... my problem is that how do I pass 1st form's data in to the 2nd one .. I have used the basic Django form manipulation mechanism and passed the form field values to the next form using Django template tags.. if request.method == 'POST': form = Users(request.POST) if form.is_valid(): cd = form.cleaned_data try: name = cd['fullName'] email = cd['emailAdd'] password1 = cd['password'] password2 = cd['password2'] phoneNumber = cd['phoneNumber'] return render_to_response('signup2.html', {'name': name, 'email': email, 'password1': password1, 'password2': password2, 'phone': phone, 'pt': phoneType}) except Exception, ex: return HttpResponse("Error %s" % str(ex)) and from the second from I just displayed those field values using tags and also used hidden fields in order to submit the form with values, like this: <label for="">Email:</label> {{ email }} <input type="hidden" id="" name="email" class="width250" value="{{ email }}" readonly /> It works nicely from the out look, but the real problem is that if someone view the source of the html he can simply get the password even hackers can get through this easily. So how do I avoid this issue.. and I don't want to use Django session since this is just a simple sign up process and no other interactions involved. Thanks.

  Read the article

• Implimenting Zend MVC for my existing site-first step?

  - by Joel

  Hi guys, OK-newbie question here. I'll try not to bombard SO with lots of questions-and hopefully this first one will show me the method I'll need to follow for subsequent conversions. I have a web-based calendar system that I developed, but it was coded for me procedurally (using PHP). I'm now working on learning OO and wanting to integrate this site into my localhost Zend Framework and slowly start converting parts to OO and the Zend Framework MVC process in particular. As I've said before, I understand that this will be a slow process, and when I'm done, I still probably won't have anything as OO friendly as if I had rewritten it from scratch, but I'd like to use this as a learning experience. So, I have dropped the whole site into my localhose/zend/Public folder, and everything is showing up great and linking to the database, etc. My question is-what would be the easiest first component to switch over to the MVC model? This site has a bit of everything-forms, login, authentication, some jQuery, etc. Can anyone point to a tutorial that would address what I'm trying to do? If indeed, a form would be one of the simpler things to switch, can someone walk me through those changes? Another idea is changing over all the header info, etc? Thanks for any pointers on where to start! EDIT: Also, I understand that SO is mainly for specific coding questions-I'm happy to share specific code, once I have an idea about which section to tackle first...

  Read the article

• looking for advise on importing excel into mysql with php

  - by Ole Media

  Alright, see if I can pick your brains from you all. I'm currently working on a project where all the information comes from different clients, the only thing in common is that the received data is done with excel. The excel spread sheet that they present is just a bunch of references and codes, and the problem than I'm facing is that I need the references and codes to be entered in certain format in order for the website to work. The perfect situation will be to go to each client and teach how I would need the data, but I can't do that because of the large number of clients, and more importantly I will be interrupting their work flow. Each client has its own codes and reference model and they are not willing to change their process The good news is that there is a standard pattern for the codes, but I'm talking close to 200 thousand codes with a bunch of combination. They way that we are currently solving the problem is that we have a person who checks each excel sheet received, runs a few macros, and manually fixes those codes in which the macro was not able to fix. The person that is doing this, is already burn out and frustrated and I would like to automatize this process with php. Suggestions?

  Read the article

• Do I lose the benefits of macro recording if I develop Excel apps in Visual Studio?

  - by DanM

  I've written lots of Excel macros in the past using the following development process: Record a macro. Open the VBA editor. Edit the macro. I'm now experimenting with a Visual Studio 2008 "Excel 2007 Add-In" project (C#), and I'm wondering if I will have to give up this development process. Questions: I know I can still record macros using Excel, but is there any way to access the resulting code in Visual Studio? Or do I just have to copy and paste then C#-ize it? What happens with my "Personal Macro Workbook"? Can I use the macros I have stored in there within C#? Or is there some way to convert them to C#? If there is some support for opening and editing VBA macros in Visual Studio, can you provide a very brief summary of how it works or point me to a good reference? Do you have any other tips for transitioning from writing macros in VBA using Excel's built-in editor to writing them in C# with Visual Studio?

  Read the article

• Silverlight Not Rendering On Navigation

  - by Azmath

  I'm trying to create a site that requires login. Its entirely designed in silverlight. So my first page, home.xaml loads in mysite.aspx and it basically has a login page. AFter login, the user is redirected to another page user.aspx. in that page, i've embedded another silverlight control called nav.xaml. so now when user.aspx loads it is supposed to load a silverlight control. i've programmed app.xaml.vb such that it loads nav.xaml in the rootlayout when the page requesting is user.aspx. but for some reason its not working. my app.xaml.vb code: Private Sub Application_Startup(ByVal o As Object, ByVal e As StartupEventArgs) Handles Me.Startup If e.InitParams.ContainsKey("ReqPage") Then If e.InitParams("ReqPage") = "userpage" Then Me.RootVisual = New Nav() End If Else Me.RootVisual = New Home() End If End Sub in IE, half of the nav.xaml is rendered. but in firefox nothing is rendered. so wats going on exactly? pls help!

  Read the article

< Previous Page | 625 626 627 628 629 630 631 632 633 634 635 636  | Next Page >