Search Results

Search found 133768 results on 5351 pages for 'using directive'.

Page 63/5351 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • Can't boot Ubuntu 12.04 from external Hard Drive using Mac

    - by Catgirl the Crazy
    Recently, I upgraded the RAM and hard drive on my Early 2008 Macbook to improve the performance. Rather than throw away the old hard drive, I bought an enclosure for it to turn it into an external hard drive, and, since all the data was migrated to my new drive, I decided to install Ubuntu on it for funsies (note: I am a near-total Ubuntu n00b). My first attempt to install Ubuntu didn't work (it gave me errors about not being able to find the BIOS or something), but my second attempt finished successfully (can't remember what, if anything, I did different). However, when I plug the external drive into my Macbook, it gives me a message saying it can't read the disk. Moreover, when I go into the Startup Manager (i.e.: what you get when you turn on the Macbook while holding the option key), the external drive is not one of the available startup disks. I thought this might be because I have an older Macbook, so I tried booting it with my mom's Late 2011 Macbook, and got the same results. Then I tried booting it through my dad's Dell laptop that runs Windows 7, and that time it worked. This is really counter intuitive to me, since the hard drive originally came from a Macbook, so if anything you'd think it would be less compatible with the Windows laptop than the Macbook. In case it helps, here's a link to a picture of how I set up the partition table while doing the install (not shown there is the fact that I checked the "Format?" box next to the /boot partition, since it gave me a warning when I tried to continue the installation without doing so) Anyone have any clue at all? If it helps, the hard drive I'm using is a 120GB 5400-rpm Serial ATA hard disk drive.

    Read the article

  • Using XML as data storage

    - by Kian Mayne
    I was thinking about the XML format and the following quote: “XML is not a database. It was never meant to be a database. It is never going to be a database. Relational databases are proven technology with more than 20 years of implementation experience. They are solid, stable, useful products. They are not going away. XML is a very useful technology for moving data between different databases or between databases and other programs. However, it is not itself a database. Don't use it like one.“ -Effective XML: 50 Specific Ways to Improve Your XML by Elliotte Rusty Harold (page 230, Part 4, Item 41, 2nd paragraph) This seems to really stress that XML should not be used for data storage and should only be used for program to program interoperability. Personally, I disagree and .NET's app.config file that's used to store a program's settings is an example of data storage in an XML file. However for databases rather than configurations etc XML should not be used. To develop my point, I will use two examples: A) Data about customers with fields that are all on one level i.e. there are a number of fields all relating to one customer with no children B) Data about configuration of an application where nested fields and properties make a lot of sense So my question is, Is this still a valid statement and is it now acceptable to store data using XML? EDIT: I've sent an email to the author of that quote to ask for his input/extra context.

    Read the article

  • ASP.NET: Using conditionals in data binding expressions

    - by DigiMortal
    ASP.NET 2.0 has no support for using conditionals in data binding expressions but it will change in ASP.NET 4.0. In this posting I will show you how to implement Iif() function for ASP.NET 2.0 and how ASP.NET 4.0 solves this problem smoothly without any code. Problem Let’s say we have simple repeater. <asp:Repeater runat="server" ID="itemsList">     <HeaderTemplate>         <table border="1" cellspacing="0" cellpadding="5">     </HeaderTemplate>     <ItemTemplate>         <tr>         <td align="right"><%# Container.ItemIndex + 1 %>.</td>         <td><%# Eval("Title") %></td>         </tr>     </ItemTemplate>     <FooterTemplate>         </table>     </FooterTemplate> </asp:Repeater> Repeater is bound to data when form loads. protected void Page_Load(object sender, EventArgs e) {     var items = new[] {                     new { Id = 1, Title = "Headline 1" },                     new { Id = 2, Title = "Headline 2" },                     new { Id = 2, Title = "Headline 3" },                     new { Id = 2, Title = "Headline 4" },                     new { Id = 2, Title = "Headline 5" }                 };     itemsList.DataSource = items;     itemsList.DataBind(); } We need to format even and odd rows differently. Let’s say we want even rows to be with whitesmoke background and odd rows with white background. Just like shown on screenshot on right. Our first thought is to use some simple expression to avoid writing custom methods. We cannot use construct like this <%# Container.ItemIndex % 2==0 ? "white" : "whitesmoke"  %> because all we get are template compilation errors. ASP.NET 2.0: Iif() method For ASP.NET 2.0 pages and controls we can create Iif() method and call it from our templates. This is out Iif() method. protected object Iif(bool condition, object trueResult, object falseResult) {     return condition ? trueResult : falseResult; } And here you can see how to use it. <asp:Repeater runat="server" ID="itemsList">   <HeaderTemplate>     <table border="1" cellspacing="0" cellpadding="5">     </HeaderTemplate>   <ItemTemplate>     <tr style='background-color:'       <%# Iif(Container.ItemIndex % 2==0 ? "white" : "whitesmoke") %>'>       <td align="right">         <%# Container.ItemIndex + 1 %>.</td>       <td>         <%# Eval("Title") %></td>     </tr>   </ItemTemplate>   <FooterTemplate>     </table>   </FooterTemplate> </asp:Repeater> This method does not care about types because it works with all objects (and value-types). I had to define this method in code-behind file of my user control because using this method as extension method made it undetectable for ASP.NET template engine. ASP.NET 4.0: Conditionals are supported In ASP.NET 4.0 we will write … hmm … we will write nothing special. Here is solution. <asp:Repeater runat="server" ID="itemsList">   <HeaderTemplate>     <table border="1" cellspacing="0" cellpadding="5">     </HeaderTemplate>   <ItemTemplate>     <tr style='background-color:'       <%# Container.ItemIndex % 2==0 ? "white" : "whitesmoke" %>'>       <td align="right">         <%# Container.ItemIndex + 1 %>.</td>       <td>         <%# Eval("Title") %></td>     </tr>   </ItemTemplate>   <FooterTemplate>     </table>   </FooterTemplate> </asp:Repeater> Yes, it works well. :)

    Read the article

  • Using Native Drag and Drop in HTML 5 pages

    - by nikolaosk
    This is going to be the eighth post in a series of posts regarding HTML 5. You can find the other posts here, here , here , here, here , here and here. In this post I will show you how to implement Drag and Drop functionality in an HTML 5 page using JQuery.This is a great functionality and we do not need to resort anymore to plugins like Silverlight and Flash to achieve this great feature. This is also called a native approach on Drag and Drop.I will use some events and I will write code to respond when these events are fired.As I said earlier we need to write Javascript to implement the drag and drop functionality. I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadI will create a simple HTML page.There will be two thumbnails pics on it. There will also be the drag and drop area where the user will drag the thumb pics into it and they will resize to their actual size. The HTML markup for the page follows<!doctype html><html lang="en"><head><title>Liverpool Legends Gallery</title><meta charset="utf-8"><link rel="stylesheet" type="text/css" href="style.css"><script type="text/javascript" charset="utf-8" src="jquery-1.8.1.min.js"></script>  <script language="JavaScript" src="drag.js"></script>   </head><body><header><h1>A page dedicated to Liverpool Legends</h1><h2>Drag and Drop the thumb image in the designated area to see the full image</h2></header><div id="main"><img src="thumbs/steven-gerrard.jpg"  big="large-images/steven-gerrard-large.jpg" alt="John Barnes"><img src="thumbs/robbie-fowler.jpg" big="large-images/robbie-fowler-large.jpg" alt="Ian Rush"><div id="drag"><p>Drop your image here</p> </div></body></html> There is nothing difficult or fancy in the HTML markup above. I have a link to the external JQuery library and another javascript file that I will implement the whole drag and drop functionality.The code for the css file (style.css) follows#main{  float: left;  width: 340px;  margin-right: 30px;}#drag{  float: left;  width: 400px;  height:300px;  background-color: #c0c0c0;}These are simple CSS rules. This post cannot be a tutorial on CSS.For all these posts I assume that you have the basic HTML,CSS,Javascript skills.Now I am going to create a javascript file (drag.js) to implement the drag and drop functionality.I will provide the whole code for the drag.js file and then I will explain what I am doing in each step.$(function() {          var players = $('#main img');          players.attr('draggable', 'true');                    players.bind('dragstart', function(event) {              var data = event.originalEvent.dataTransfer;               var src = $(this).attr("big");              data.setData("Text", src);               return true;          });          var target = $('#drag');          target.bind('drop', function(event) {            var data = event.originalEvent.dataTransfer;            var src = ( data.getData('Text') );                         var img = $("<img></img>").attr("src", src);            $(this).html(img);            if (event.preventDefault) event.preventDefault();            return(false);          });                   target.bind('dragover', function(event) {                if (event.preventDefault) event.preventDefault();            return false;          });           players.bind('dragend', function(event) {             if (event.preventDefault) event.preventDefault();             return false;           });        });   In these lines var players = $('#main img'); players.attr('draggable', 'true');We grab all the images in the #main div and store them in a variable and then make them draggable.Then in following lines I am using the dragstart event.  players.bind('dragstart', function(event) {              var data = event.originalEvent.dataTransfer;               var src = $(this).attr("big");              data.setData("Text", src);               return true;          }); In this event I am associating the custom data attribute value with the item I am dragging.Then I create a variable to get hold of the dropping area var target = $('#drag'); Then in the following lines I implement the drop event and what happens when the user drops the image in the designated area on the page. target.bind('drop', function(event) {            var data = event.originalEvent.dataTransfer;            var src = ( data.getData('Text') );                         var img = $("<img></img>").attr("src", src);            $(this).html(img);            if (event.preventDefault) event.preventDefault();            return(false);          }); The dragend  event is fired when the user has finished the drag operation        players.bind('dragend', function(event) {             if (event.preventDefault) event.preventDefault();             return false;           }); When this method event.preventDefault() is called , the default action of the event will not be triggered.Please have a look a the picture below to see how the page looks before the drag and drop takes place. Then simply I drag and drop a picture in the dropping area.Have a look at the picture below It works!!! Hope it helps!!  

    Read the article

  • Want to book hotel stay using Bitcoin? Book using Expedia.com

    - by Gopinath
    The online travel booking leader Expedia announced that it started accepting Bitcoins for booking hotels on its website. For those who are new to Bitcoin, it is a digital currency in which transactions can be performed without the need for a central bank – its more like internet of currency. At the moment Expedia is accepting Bitcoin payments only for hotel bookings and in the future it may allow flights and vacation packages bookings. When Expedia customers wants to pay for a hotel using Bitcoin then they are transferred to Coinbase, a third party bit coin processor, for accepting the payments and then they are redirected back to Expedia.com to complete booking. This simple process would definitely drive mainstream adoption of Bitcoin – a win-win situation for digital currency users as well as for the travel company as they save a lot on card processing fees. Online retailers pay around 3% of transaction amount as fees for credit card processing companies like Visa & Master when they accept cards, but Coinbase charges a fee of just 1 percent for processing Bitcoins. Irrespective of customers adoption to Bitcoin based payments on Expedia as well as the savings on transaction fees, this move would give bragging rights to Expedia being the first e-commerce giant to accept digital currency! Image credit: Jonathan Caves

    Read the article

  • Remove IP address from the URL of website using apache

    - by sapatos
    I'm on an EC2 instance and have a domain domain.com linked to the EC2 nameservers and it happily is serving my pages if I type domain.com in the URL. However when the page is served it resolves the url to: 1.1.1.10/directory/page.php. Using apache I've set up the following VirtualHost, following examples provided at http://httpd.apache.org/docs/2.0/dns-caveats.html Listen 80 NameVirtualHost 1.1.1.10:80 <VirtualHost 1.1.1.10:80> DocumentRoot /var/www/html/directory ServerName domain.com # Other directives here ... <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$"> Header set Cache-Control "max-age=290304000, public" </FilesMatch> </VirtualHost> However I'm not getting any changes to how the URL is displayed. This is the only VirtualHost configured on this site and I've confirmed its the one being used as I've managed to break it a number of times whilst experimenting with the configuration. The route53 entries I have are: domain.com A 1.1.1.10 domain.com NS ns-11.awsdns-11.com ns-111.awsdns-11.net ns-1111.awsdns-11.org ns-1111.awsdns-11.co.uk domain.com SOA ns-11.awsdns-11.com. awsdns-hostmaster.amazon.com. 1 1100 100 1101100 11100

    Read the article

  • Disallow all user agents except one using .htaccess?

    - by Kian Mayne
    I've been struggling to get this .htaccess working. The aim is to disallow all user agents besides my app. The app sends a GET request with a user agent of lets say 'AcmeUpdater'. Whenever I try to navigate to any file in the folder, I get a 500 - Internal Server Error. Here are the rules I'm using: <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteBase / RewriteCond %{HTTP_USER_AGENT} !^KMUpdaterClient* RewriteRule .* - [F,L] </IfModule> I have updated the .htaccess file as suggested in the answer by Nick, and restarted Apache. After trying a couple of different things, it seems that just the presence of a .htaccess is causing the 500 error. I'm getting nothing in the error logs. The .htaccess file at the document root looks like the following: <IfModule mod_rewrite.c> Options +FollowSymLinks ErrorDocument 404 /index.php?error=404 RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d </IfModule> So I realised that the error logs were in chronological order rather than the reverse chronological I expected (Oops!). The error I'm getting is: </IfModule> without matching <IfModule> section. I removed the </IfModule> and still I get that error. Ideas?

    Read the article

  • Using PowerShell with Office365

    - by Sahil Malik
    SharePoint 2010 Training: more information Did you know, you can fully manage Office365 with PowerShell?What? Wasn’t Office365 supposed to be in the cloud – how do I use powershell with THAT!? Is it black magic? No not really! Office 365 uses the remote powershell functionality of Windows Powershell 2.0. It builds upon the Windows remote management service (you will find it in the services console of Vista+ or Windows2008+ by default, or installed as an addon on XP). It uses that to connect to a web service, and download the available commandlets – based on the logged in user. WHOAA!! So, what can be managed using PowerShell in Office 365? You can manage domains Security Groups Enhanced Authorizations Identity Federation Partner support – where you designate a partner to manage your Office365 And Exchange. Note that Lync and SharePoint online are not manageable via powershell. So, still sound like black magic? What are the actual steps to use Powershell in Office365? Well Read full article ....

    Read the article

  • Using an Apt Repository for Paid Software Updates

    - by Scott Warren
    I'm trying to determine a way to distribute software updates for a hosted/on-site web application that may have weekly and/or monthly updates. I don't want the customers who use the on-site product to have to worry about updating it manually I just want it to download and install automatically ala Google Chrome. I'm planning on providing an OVF file with Ubuntu and the software installed and configured. My first thought on how to distributed software is to create six Apt repositories/channels (not sure which would be better at this point) that will be accessed through SSH using keys so if a customer doesn't renew their subscription we can disable their account: Beta - Used internally on test data to check the package for major defects. Internal - Used internally on live data to check the package for defects (dog fooding stage). External 1 - Deployed to 1% of our user base (randomly selected) to check for defects. External 9 - Deployed to 9% of our user base (randomly selected) to check for defects. External 90 - Deployed to the remaining 90% of users. Hosted - Deployed to the hosted environment. It will take a sign off at each stage to move into the next repository in case problems are reported. My questions to the community are: Has anyone tried something like this before? Can anyone see a downside to this type of a procedure? Is there a better way?

    Read the article

  • SQL SERVER – Using MAXDOP 1 for Single Processor Query – SQL in Sixty Seconds #008 – Video

    - by pinaldave
    Today’s SQL in Sixty Seconds video is inspired from my presentation at TechEd India 2012 on Speed up! – Parallel Processes and Unparalleled Performance. There are always special cases when it is about SQL Server. There are always few queries which gives optimal performance when they are executed on single processor and there are always queries which gives optimal performance when they are executed on multiple processors. I will be presenting the how to identify such queries as well what are the best practices related to the same. In this quick video I am going to demonstrate if the query is giving optimal performance when running on single CPU how one can restrict queries to single CPU by using hint OPTION (MAXDOP 1). More on Errors: Difference Temp Table and Table Variable – Effect of Transaction Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT Debate – Table Variables vs Temporary Tables – Quiz – Puzzle – 13 of 31 I encourage you to submit your ideas for SQL in Sixty Seconds. We will try to accommodate as many as we can. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Video

    Read the article

  • 12.10 visual performance using nvidia driver

    - by user100485
    My fresh ubuntu 12.10 install is slow, not something extreme but dragging windows, switching workspaces and things like that are just slow and look horrible. it feels like the fps is dropping in a game. Doing some photoshop work in windows was even a relief! This effect gets worse if I connect my external monitor. My system is an intel pentium dual core T4500 with 4gb memory and a GeForce 8200M G/integrated/SSE2 graphics chip. Nothing fancy but should be able to run ok. My "experience" in ubuntu is set to standard. (MSI cr500 laptop) I've installed the nvidia drivers, tried current and experimental and the experimental drivers seem to perform a bit better but overall bad anyway. I set the mode to adaptive in the nvidia-settings tool and it goes to maximum setting directly and doesn't come back. Using htop I found out that compiz or the X server always use a few percent of my cpu, more than I think it should and the time consumed is 5:18 for compiz, 4:33 for /usr/bin/X and 2:41 for google chrome(about 30 tabs open so not too strange I think.) What can I do to increase the visual performance cause this makes me not want to use ubuntu in public!

    Read the article

  • Pointer position way off in Java Application menu's when using gnome-shell

    - by Hailwood
    When using any java application in gnome-shell if the window is maximised the pointer position is way off; but only on the menu's, in the editor, or the side panel, the pointer is fine. This only presents itself when the window is maximized, and it seems that the further away from 0x0 the window is when you maximise it, the bigger the pointer offset. From what I have gathered it has to do with the window not updating it's size when it gets maximised. The other issue is that when a gnome-shell notification appears, when clicking on it, I lose the ability to type in the editor, I can select text etc, but can't give it focus to type. I must bring up some other text input (e.g. right click on a file on the left, select rename, which brings up a rename dialog) after that I can type in the editor again. So, how can I fix this? Below is as much information as I can think to provide $ gnome-shell --version GNOME Shell 3.6.1 $ java -version java version "1.7.0_09" Java(TM) SE Runtime Environment (build 1.7.0_09-b05) Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode) $ file /etc/alternatives/java /etc/alternatives/javac /etc/alternatives/java: symbolic link to '/usr/lib/jvm/java-7-oracle/jre/bin/java' /etc/alternatives/javac: symbolic link to '/usr/lib/jvm/java-7-oracle/bin/javac'

    Read the article

  • Problem displaying tiles using tiled map loader with SFML

    - by user1905192
    I've been searching fruitlessly for what I did wrong for the past couple of days and I was wondering if anyone here could help me. My program loads my tile map, but then crashes with an assertion error. The program breaks at this line: spacing = atoi(tilesetElement-Attribute("spacing")); Here's my main game.cpp file. #include "stdafx.h" #include "Game.h" #include "Ball.h" #include "level.h" using namespace std; Game::Game() { gameState=NotStarted; ball.setPosition(500,500); level.LoadFromFile("meow.tmx"); } void Game::Start() { if (gameState==NotStarted) { window.create(sf::VideoMode(1024,768,320),"game"); view.reset(sf::FloatRect(0,0,1000,1000));//ball drawn at 500,500 level.SetDrawingBounds(sf::FloatRect(view.getCenter().x-view.getSize().x/2,view.getCenter().y-view.getSize().y/2,view.getSize().x, view.getSize().y)); window.setView(view); gameState=Playing; } while(gameState!=Exiting) { GameLoop(); } window.close(); } void Game::GameLoop() { sf::Event CurrentEvent; window.pollEvent(CurrentEvent); switch(gameState) { case Playing: { window.clear(sf::Color::White); window.setView(view); if (CurrentEvent.type==sf::Event::Closed) { gameState=Exiting; } if ( !ball.IsFalling() &&!ball.IsJumping() &&sf::Keyboard::isKeyPressed(sf::Keyboard::Space)) { ball.setJState(); } ball.Update(view); level.Draw(window); ball.Draw(window); window.display(); break; } } } And here's the file where the error happens: /********************************************************************* Quinn Schwab 16/08/2010 SFML Tiled Map Loader The zlib license has been used to make this software fully compatible with SFML. See http://www.sfml-dev.org/license.php This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. *********************************************************************/ #include "level.h" #include <iostream> #include "tinyxml.h" #include <fstream> int Object::GetPropertyInt(std::string name) { int i; i = atoi(properties[name].c_str()); return i; } float Object::GetPropertyFloat(std::string name) { float f; f = strtod(properties[name].c_str(), NULL); return f; } std::string Object::GetPropertyString(std::string name) { return properties[name]; } Level::Level() { //ctor } Level::~Level() { //dtor } using namespace std; bool Level::LoadFromFile(std::string filename) { TiXmlDocument levelFile(filename.c_str()); if (!levelFile.LoadFile()) { std::cout << "Loading level \"" << filename << "\" failed." << std::endl; return false; } //Map element. This is the root element for the whole file. TiXmlElement *map; map = levelFile.FirstChildElement("map"); //Set up misc map properties. width = atoi(map->Attribute("width")); height = atoi(map->Attribute("height")); tileWidth = atoi(map->Attribute("tilewidth")); tileHeight = atoi(map->Attribute("tileheight")); //Tileset stuff TiXmlElement *tilesetElement; tilesetElement = map->FirstChildElement("tileset"); firstTileID = atoi(tilesetElement->Attribute("firstgid")); spacing = atoi(tilesetElement->Attribute("spacing")); margin = atoi(tilesetElement->Attribute("margin")); //Tileset image TiXmlElement *image; image = tilesetElement->FirstChildElement("image"); std::string imagepath = image->Attribute("source"); if (!tilesetImage.loadFromFile(imagepath))//Load the tileset image { std::cout << "Failed to load tile sheet." << std::endl; return false; } tilesetImage.createMaskFromColor(sf::Color(255, 0, 255)); tilesetTexture.loadFromImage(tilesetImage); tilesetTexture.setSmooth(false); //Columns and rows (of tileset image) int columns = tilesetTexture.getSize().x / tileWidth; int rows = tilesetTexture.getSize().y / tileHeight; std::vector <sf::Rect<int> > subRects;//container of subrects (to divide the tilesheet image up) //tiles/subrects are counted from 0, left to right, top to bottom for (int y = 0; y < rows; y++) { for (int x = 0; x < columns; x++) { sf::Rect <int> rect; rect.top = y * tileHeight; rect.height = y * tileHeight + tileHeight; rect.left = x * tileWidth; rect.width = x * tileWidth + tileWidth; subRects.push_back(rect); } } //Layers TiXmlElement *layerElement; layerElement = map->FirstChildElement("layer"); while (layerElement) { Layer layer; if (layerElement->Attribute("opacity") != NULL)//check if opacity attribute exists { float opacity = strtod(layerElement->Attribute("opacity"), NULL);//convert the (string) opacity element to float layer.opacity = 255 * opacity; } else { layer.opacity = 255;//if the attribute doesnt exist, default to full opacity } //Tiles TiXmlElement *layerDataElement; layerDataElement = layerElement->FirstChildElement("data"); if (layerDataElement == NULL) { std::cout << "Bad map. No layer information found." << std::endl; } TiXmlElement *tileElement; tileElement = layerDataElement->FirstChildElement("tile"); if (tileElement == NULL) { std::cout << "Bad map. No tile information found." << std::endl; return false; } int x = 0; int y = 0; while (tileElement) { int tileGID = atoi(tileElement->Attribute("gid")); int subRectToUse = tileGID - firstTileID;//Work out the subrect ID to 'chop up' the tilesheet image. if (subRectToUse >= 0)//we only need to (and only can) create a sprite/tile if there is one to display { sf::Sprite sprite;//sprite for the tile sprite.setTexture(tilesetTexture); sprite.setTextureRect(subRects[subRectToUse]); sprite.setPosition(x * tileWidth, y * tileHeight); sprite.setColor(sf::Color(255, 255, 255, layer.opacity));//Set opacity of the tile. //add tile to layer layer.tiles.push_back(sprite); } tileElement = tileElement->NextSiblingElement("tile"); //increment x, y x++; if (x >= width)//if x has "hit" the end (right) of the map, reset it to the start (left) { x = 0; y++; if (y >= height) { y = 0; } } } layers.push_back(layer); layerElement = layerElement->NextSiblingElement("layer"); } //Objects TiXmlElement *objectGroupElement; if (map->FirstChildElement("objectgroup") != NULL)//Check that there is atleast one object layer { objectGroupElement = map->FirstChildElement("objectgroup"); while (objectGroupElement)//loop through object layers { TiXmlElement *objectElement; objectElement = objectGroupElement->FirstChildElement("object"); while (objectElement)//loop through objects { std::string objectType; if (objectElement->Attribute("type") != NULL) { objectType = objectElement->Attribute("type"); } std::string objectName; if (objectElement->Attribute("name") != NULL) { objectName = objectElement->Attribute("name"); } int x = atoi(objectElement->Attribute("x")); int y = atoi(objectElement->Attribute("y")); int width = atoi(objectElement->Attribute("width")); int height = atoi(objectElement->Attribute("height")); Object object; object.name = objectName; object.type = objectType; sf::Rect <int> objectRect; objectRect.top = y; objectRect.left = x; objectRect.height = y + height; objectRect.width = x + width; if (objectType == "solid") { solidObjects.push_back(objectRect); } object.rect = objectRect; TiXmlElement *properties; properties = objectElement->FirstChildElement("properties"); if (properties != NULL) { TiXmlElement *prop; prop = properties->FirstChildElement("property"); if (prop != NULL) { while(prop) { std::string propertyName = prop->Attribute("name"); std::string propertyValue = prop->Attribute("value"); object.properties[propertyName] = propertyValue; prop = prop->NextSiblingElement("property"); } } } objects.push_back(object); objectElement = objectElement->NextSiblingElement("object"); } objectGroupElement = objectGroupElement->NextSiblingElement("objectgroup"); } } else { std::cout << "No object layers found..." << std::endl; } return true; } Object Level::GetObject(std::string name) { for (int i = 0; i < objects.size(); i++) { if (objects[i].name == name) { return objects[i]; } } } void Level::SetDrawingBounds(sf::Rect<float> bounds) { drawingBounds = bounds; cout<<tileHeight; //Adjust the rect so that tiles are drawn just off screen, so you don't see them disappearing. drawingBounds.top -= tileHeight; drawingBounds.left -= tileWidth; drawingBounds.width += tileWidth; drawingBounds.height += tileHeight; } void Level::Draw(sf::RenderWindow &window) { for (int layer = 0; layer < layers.size(); layer++) { for (int tile = 0; tile < layers[layer].tiles.size(); tile++) { if (drawingBounds.contains(layers[layer].tiles[tile].getPosition().x, layers[layer].tiles[tile].getPosition().y)) { window.draw(layers[layer].tiles[tile]); } } } } I really hope that one of you can help me and I'm sorry if I've made any formatting issues. Thanks!

    Read the article

  • Recommended Method to Watch Amazon Prime using Ubuntu 14.04 LTS

    - by Kurt Sanger
    I realize that Hal is no longer in the Ubuntu Software Center for Ubuntu 14.04 and it is only available from a third party at this time. But I would like to know what Ubuntu's plans are for integrating DRM into Linux? Especially with Amazon's integration into the search tool, one would hope that they would make it easier for their Amazon Prime customers to watch Instant Videos. Is the repository for getting Hal for 13.10 safe for use? What will that break if I install it onto 14.04? Or do we need to find another OS that has DRM built into it? If Hal is okay to add to the OS using a third party repo, then why doesn't Ubuntu Software Center support it too? I imagine that Amazon's contract with the video copyright holders requires that they have some protection on electronically distributed media. I also imagine that getting Amazon to change is much harder than getting a bunch of software engineers to fix Ubuntu. Unless they don't want too. At which point Ubuntu isn't really a complete OS. Very disappointing. In general the ease of use of Ubuntu, the software center, and the large variety of applications was alluring. But breaking DRM wasn't a great idea. Can't wait to see what fails in our next update. Please tell us that there is a plan that is going to work in our future.

    Read the article

  • Get entities ids from two similar collections using one method

    - by Patryk Roszczyniala
    I've got two lists: List<Integer, ZooEntity> zoos; List<Integer, List<ZooEntity>> groupOfZoos; These operations will return collections of values: Collection<ZooEntity> cz = zoos.values(); Collection<List<ZooEntity>> czList = groupOfZoos.values(); What I want to achieve is to get list of all zoo ids. List<Integer> zooIds = cz ids + czList ids; Of course I can create two methods to do what I want: public List<Integer> getIdsFromFlatList(Collection<ZooEntity> list) { List<Integer> ids = new ArrayList<Integer>(); for (ZooEntity z : list) { ids.add(z.getId()); } return ids; } public List<Integer> getIdsFromNestedList(Collection<List<ZooEntity>> list) { List<Integer> ids = new ArrayList<Integer>(); for (List<ZooEntity> zList : list) { for (ZooEntity z : zList) { ids.add(z.getId()); } } return ids; } As you can see those two methods are very similar and here is my question: Is it good to create one method (for example using generics) which will get ids from those two lists (zoos and groupOfZoos). If yes how it should look like? If no what is the best solution? BTW. This is only the example. I've got very similar problem at job and I want to do it in preety way (I can't change enities, I can change only getIds...() methods).

    Read the article

  • Moving my sprite in XNA using classes

    - by Tom
    Hey, im a newbie at this programming lark and its really frustrating me. I'm trying to move a snake in all directions while using classes. Ive created a vector2 for speed and ive attempted creating a method which moves the snake within the snake class. Now I'm confused and not sure what to do next. Appreciate any help. Thanks :D This is what i've done in terms of the method... public Vector2 direction() { Vector2 inputDirection = Vector2.Zero; if (Keyboard.GetState().IsKeyDown(Keys.Left)) inputDirection.X -= -1; if (Keyboard.GetState().IsKeyDown(Keys.Right)) inputDirection.X += 1; if (Keyboard.GetState().IsKeyDown(Keys.Up)) inputDirection.Y -= -1; if (Keyboard.GetState().IsKeyDown(Keys.Down)) inputDirection.Y += 1; return inputDirection * snakeSpeed; } Appreciate any help. Thanks :D EDIT: Well let me make everything clear. Im making a small basic game for an assignment. The game is similar to the old snake game on the old Nokia phones. I've created a snake class (even though I'm not sure whether this is needed because im only going to be having one moving sprite within the game). After I written the code above (in the snake class), the game ran with no errors but I couldn't actually move the image :( EDIT2: Thanks so much for everyones responses!!

    Read the article

  • Seeking .htaccess help: Converting multiple subdomains (both HTTP and HTTPS) to www.domain.com using .htaccess

    - by Joshua Dorkin
    I've been trying to get an answer to this question on other forums (the folks at SuperUser thought this was the place I needed to post) and via my connections, but I haven't gotten very far. Hopefully you guys can help me find an answer. I've got a dozen old subdomains that have been indexed by Google. These have been indexed as both HTTP AND HTTPS. I've managed to redirect all the subdomains properly, provided they are not HTTPS, but can't get any of the HTTPS subdomains to property redirect. Here's the code I'm using: RewriteCond %{HTTP_HOST} ^subdomain1.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain2.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain3.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] This works great until someone goes to: https://subdomain2.mysite.com$ which is not redirected back to http://www.mysite.com$ How can I get this to work? Additionally, I'm guessing there is an easier way to make it happen than setting up a dozen pairs of RewriteCond/RewriteRule? Is there any way to do this in just a few lines, including one where I list all the subdomains? I'd actually also like to redirect everything on https://www.mysite.com$ to http://www.mysite.com$ except for 3 folders. These are mysite.com/secure, mysite.com/store, mysite.com/user. Is there any good way to add this to the .htaccess file?

    Read the article

  • Exempt programs from using active VPN connection

    - by Oxwivi
    When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

    Read the article

  • lxc containers fail to autoboot in 14.04 trusty using 'lxc.start.auto = 1'

    - by user273046
    In trusty 14.04 containers fail to autoboot despite all settings being set as 14.04 requires. They show all as STOPPED I have correctly configured 2 LXC containers: calypso encelado They run perfectly if I run sudo lxc-autostart then sudo lxc-ls --fancy results in: ubuntu@saturn:/etc/init$ sudo lxc-ls --fancy NAME STATE IPV4 IPV6 AUTOSTART calypso RUNNING 192.168.1.161 - YES encelado RUNNING 192.168.1.162 - YES The problem is trying to run them at boot. I have at: /var/lib/lxc/calypso/config: # Template used to create this container: /usr/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.conf(5) # Distribution configuration lxc.include = /usr/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /var/lib/lxc/calypso/rootfs lxc.utsname = calypso # Network configuration lxc.network.type = veth lxc.network.flags = up #lxc.network.link = lxcbr0 lxc.network.link = br0 lxc.network.hwaddr = 00:16:3e:64:0b:6e # Assegnazione IP Address lxc.network.ipv4 = 192.168.1.161/24 lxc.network.ipv4.gateway = 192.168.1.1 # Autostart lxc.start.auto = 1 lxc.start.delay = 5 lxc.start.order = 100 and I have LXC_AUTO="false" as required inside /etc/default/lxc: LXC_AUTO="false" USE_LXC_BRIDGE="false" # overridden in lxc-net [ -f /etc/default/lxc-net ] && . /etc/default/lxc-net LXC_SHUTDOWN_TIMEOUT=120 Any idea on why the containers don't start at boot? At reboot they are always in the STOPPED state: ubuntu@saturn:~$ sudo lxc-ls --fancy NAME STATE IPV4 IPV6 AUTOSTART calypso STOPPED - - YES encelado STOPPED - - YES and then again they can be started manually, using sudo lxc-autostart

    Read the article

  • No WIFI or LAN on Ubuntu 12.04 or 12.10 Live CD/USB using Toshiba qosmio x870

    - by Mighty
    I recently had issues with secure boot and couldn't boot the Live CD/USB but after disabling secure boot, I was able to 'TRY UBUNTU'. My currently problem is that I can't access WIFI or LAN from either Ubuntu 12.04 or 12.10 Live CD/USB which I do from Windows 8. Also, the wireless button is able to turn on and off the wireless LED but doesn't find available WIFI. Please, what should I do to get both WIFI and LAN working on Ubuntu using Toshiba qosmio x870? UPDATED: Here's the output of lspci: ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev a1) 07:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) 08:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8723 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

    Read the article

  • SQL SERVER – Get Schema Name from Object ID using OBJECT_SCHEMA_NAME

    - by pinaldave
    Sometime a simple solution have even simpler solutions but we often do not practice it as we do not see value in it or find it useful. Well, today’s blog post is also about something which I have seen not practiced much in codes. We are so much comfortable with alternative usage that we do not feel like switching how we query the data. I was going over forums and I noticed that at one place user has used following code to get Schema Name from ObjectID. USE AdventureWorks2012 GO SELECT s.name AS SchemaName, t.name AS TableName, s.schema_id, t.OBJECT_ID FROM sys.Tables t INNER JOIN sys.schemas s ON s.schema_id = t.schema_id WHERE t.name = OBJECT_NAME(46623209) GO Before I continue let me say I do not see anything wrong with this script. It is just fine and one of the way to get SchemaName from Object ID. However, I have been using function OBJECT_SCHEMA_NAME to get the schema name. If I have to write the same code from the beginning I would have written the same code as following. SELECT OBJECT_SCHEMA_NAME(46623209) AS SchemaName, t.name AS TableName, t.schema_id, t.OBJECT_ID FROM sys.tables t WHERE t.name = OBJECT_NAME(46623209) GO Now, both of the above code give you exact same result. If you remove the WHERE condition it will give you information of all the tables of the database. Now the question is which one is better – honestly – it is not about one is better than other. Use the one which you prefer to use. I prefer to use second one as it requires less typing. Let me ask you the same question to you – which method to get schema name do yo use? and Why? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL System Table, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Reasonable technological solutions to create CRM using .NET eventually Java

    - by user1825608
    My background(If it's too long, just skip it please ; ) ): I am Java programmer(because of demand): mostly teacher for other students, worked on few thesis for others, but during my journey I discovered that .NET and Microsoft's tools are on at least two levels higher than Java and its tools so I want to learn more about them. I programmed little bit on Windows Phone(NFC Tags, TCP Clients, guitar tuner using internal microphone, simple RSS), used WPF, integrated WPF with Windows Forms, Apple Bonjour(.NET), I have expierience with IP cameras and with unusal problems, I learn Android, but I don't like it at all. Problem: I was asked by my friend to create CRM for small new company. There will maximum 20 workers in the company working at computers in few cities in the country(Poland). They just want to store contracts with the clients and client's data. I am not sure what exacly they do but probably sell apartments so there will be at most few thousands of contracts to store in far future. Now I am totally new to CRM but I want to learn. I have few questions: Should the data be stored on a server in the company's building running 24/7 or cloud. If cloud which one? Should I use ASPX or WPF. I read one topic about it but as far as I know aspx sites can be viewed from every device with internet browser: tablets, phones(Android, WP, iOS) and computers at the same time- so the job is done once and for all(Am I right?), I don't know nothing about aspx. Can WPF be also used in manner that does not need to port it for other platforms?

    Read the article

  • Creating user UI using Flixel

    - by Jamie Read
    I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. What I am trying to do is add a Start Screen before actually loading the game. I have a create function that adds all the game elements to the stage: override public function create():void // all game elements { How can I add this pre-load Start Screen? I'm not sure if I have to add in the code to this create function or somewhere else and what code to actually add. Eventually I would also like to add saving, loading, options and upgrades too. So any advice with that would be great. Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } } Thanks.

    Read the article

  • Gotcha when using JavaScript in ADF Regions

    - by Frank Nimphius
    You use the ADF Faces af:resource tag to add or reference JavaScript on a page. However, adding the af:resource tag to a page fragment my not produce the desired result if the script is added as shown below <?xml version='1.0' encoding='UTF-8'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <af:resource type="javascript">   function yourMethod(evt){ ... } </af:resource> Adding scripts to a page fragment like this will see the script added for the first page fragment loaded by an ADF region but not for any subsequent fragment navigated to within the context of task flow navigation. The cause of this problem is caching as the af:resource tag is a JSP element and not a lazy loaded JSF component, which makes it a candidate for caching. To solve the problem, move the af:resource tag into a container component like af:panelFormLayout so the script is added when the component is instantiated and added to the page.  <?xml version='1.0' encoding='UTF-8'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <af:panelFormLayout> <af:resource type="javascript">   function yourMethod(evt){ ... } </af:resource> </af:panelFormLayout> Magically this then works and prevents browser caching of the script when using page fragments.

    Read the article

  • SQL – Download FREE Book – Data Access for HighlyScalable Solutions: Using SQL, NoSQL, and Polyglot Persistence

    - by Pinal Dave
    Recently I was preparing for Big Data and I ended up on very interesting read for everybody. This is created by Microsoft and it is indeed a fantastic read as per my opinion. It took me some time to read this entire book but it was worth reading this as it tried to answer two of the very interesting questions related to muscle. Here is the abstract from the book: Organizations seeking to use a NoSQL database are therefore faced with a twofold challenge: • Which NoSQL database(s) best meet(s) the needs of the organization? • How does an organization integrate a NoSQL database into its solutions? As I keep on reading the book, I find it very interesting and informative. I suggest if you have time this weekend, download the book and read it. This guide focuses on the most common types of NoSQL database currently available, describes the situations for which they are most suited, and shows examples of how you might incorporate them into a business application. The guide summarizes the experiences of a fictitious organization named Adventure Works, who implemented a solution that comprised an assortment of different databases. Download Data Access for HighlyScalable Solutions:  Using SQL, NoSQL,  and Polyglot Persistence While we are talking about Big Data and NoSQL do not forget to check out my tomorrow’s blog as I am going to talk about the same subject and it will be very interesting. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, NoSQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >