Search Results

Search found 30658 results on 1227 pages for 'off screen'.

Page 630/1227 | < Previous Page | 626 627 628 629 630 631 632 633 634 635 636 637  | Next Page >

  • Why can't I resize some virtual thick disks in VMWhare vSphere Client

    - by Paul-Jan
    Let me start off by mentioning I am really really new to this whole VMWare ESX/vSphere thing, so apologies if this is a FAQ or asked a million times before using better wording. Also, please correct me if I'm using the wrong terms all over the place. We just got this brand new VMWare EXS server, and we started importing virtual machines from around the office. Some of them were originally based on VMWare, others are converted from MS Virtual Server. One of these machines needs a bigger disk, but in the vSphere Client the disk size spinedit is disabled. Disk type is thick. However, for other machines, with the same disk type, the spinedit is enabled and I can happily resize their disks. So here is the question: why can't I resize this disk in particular? All machines are freshly converted, so I assume there are no snapshots yet, which I read would stop a resize from happening (again, correct me if I'm wrong).

    Read the article

  • Thunderbird compact is taking forever

    - by mulllhausen
    One day I came in to work and found that our development server - a Ubuntu box had a full hard disk. I did a bit of investigation using the du command and it seems like mozilla thunderbird is the major culprit. After burning off some backups, the disk was left at 94%: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 895G 791G 59G 94% / none 4.0G 300K 4.0G 1% /dev none 4.0G 1.4M 4.0G 1% /dev/shm none 4.0G 140K 4.0G 1% /var/run none 4.0G 0 4.0G 0% /var/lock none 4.0G 0 4.0G 0% /lib/init/rw $ cd $ du -ch | grep [0-9]G 666G ./.thunderbird/ccsmcruu.default/ImapMail/mail.adofms.com.au 666G ./.thunderbird/ccsmcruu.default/ImapMail 667G ./.thunderbird/ccsmcruu.default 667G ./.thunderbird 2.2G ./.VirtualBox/Machines/iBike/Snapshots 2.2G ./.VirtualBox/Machines/iBike 2.2G ./.VirtualBox/Machines 2.2G ./.VirtualBox 670G . 670G total I did some reading and found that Mozilla Thunderbird does not compact files by default - i.e. all of the old emails that were sent to trash are still kept. One of the mailboxes used to get a lot of spam so I guess this accounts for the 667GB. I opened up Thunderbird to see how much space the inbox actually takes up and it turns out to be approximately 500MB - over 1000 times less than the stuff that has not been compacted over the years. So i right clicked on the inbox directory in the tree on the left of Thunderbird and selected 'compact'. I left it for about 12hours but even after that it still said 'compacting folder' on the status bar. I don't use Thunderbird on this PC - it belonged to a colleague who has left the company, however I do occasionally need to look through the inbox for references to the project I am working on, so deleting all traces of Thunderbird is not an option. My question is - is there any way I can monitor the progress of Thunderbird's compacting function? I would really like to know how long it is going to take. Also is there any way I can speed up the compacting process?

    Read the article

  • Silverlight Cream for May 19, 2010 -- #865

    - by Dave Campbell
    In this Issue: Michael Washington, Mike Snow(-2-), Justin Angel(-2-), Jeremy Likness, and David Kelley. Shoutout: Erik Mork and crew have their latest up: Silverlight Week – Silverlight Android? From SilverlightCream.com: Simple Silverlight 4 Example Using oData and RX Extensions Michael Washington has a follow-on tutorial up on ViewModel, Rx, and lashed up to OData... good detailed tutorial with external links for more information. Silverlight Tip of the Day #21 – Animation Easing Mike Snow has a couple new tips up -- this first one is about easing... great diagrams to help visualize and a cool demo application to boot. Silverlight Tip of the Day #22 – Data Validation Mike Snow's second tip (#22) is about validation and again he has a great demo app on the post. Windows Phone 7 - Emulator Automation Justin Angel has a WP7 post up about Automating the emulator... and in the process, loading the emulator from something other than VS2010... lots of good information. TFS2010 WP7 Continuous Integration Justin Angel hinted at continuous integration for WP7 in the last post, and he pays off with this one... even without all the bits installed on the build server. Making the ScrollViewer Talk in Silverlight 4 Jeremy Likness tried to respond to a user query about knowing when a user scrolled to the bottom of a ScrollViewer... Jeremy resolved it by listening to the right property. MEF (Microsoft Extensibility Framework) made simple (ish) David Kelley is discussing MEF and using a real-world example while doing so. Good discussion and code available in his code browser app... check thecomments. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • HTML5Rocks Live, Episode 1

    HTML5Rocks Live, Episode 1 In this episode of HTML5Rocks Live, Boris, Eric and Paul join us to show some great new libraries and performance tips. Please leave your comments on our plus page at goo.gl In the first chapter, Paul shows how to use some of Chrome's new developer tools to understand how things are rendering and get improved performance. In the second chapter (21:25), Boris shows off his new device.js library to help make development of mobile web applications and sites easier. Eric closes the hangout (40:00) and talks about his new file system API polyfill that uses indexed db as it's back end. 02:15 Scroll Effects Demo goo.gl 23:04 - Media Queries Site goo.gl 24:15 - WURFL goo.gl 26:40 - Boris' Device Library goo.gl 29:28 - Device.js Demo goo.gl 33:25 - Bug to add touch-enabled media query to Chrome, please star goo.gl 35:00 - Chrome's DevTools for Mobile Development 38:56 - Paul Irish's Touch Demos goo.gl 40:43 - File System API Book goo.gl 43:10 - Eric's idb.filesystem.js goo.gl 44:27 - idb.filesystem HTML5 File System Demo goo.gl 47:33 - HTML5 Filesystem Playground goo.gl From: GoogleDevelopers Views: 12239 221 ratings Time: 52:29 More in Science & Technology

    Read the article

  • Software to Monitor the Stability of Internet Connection

    - by Ngu Soon Hui
    Thanks to the excellent internet connection service offered by one of the best ISP in the world, the internet connection in my area is very, very unstable. I can connect some of the time, but MOST of the time the connection will just drop off ( with the error message unable to resolve host) and after a few minutes, it will resume back. If I ping the domain name directly (i.e., ping www.google.com -t in cmd command), I will get a cannot ping message. Because of the flickery nature of the connection, it's pretty hard to prove to the support staff that internet connection is unstable. So I am thinking about using one software to record down the connection situation, so that I can present to the technical staff and make sure that they have no excuse not to fix my problem. Any such software available? Edit: Of course, such software should not record my browsing habit, and must be able to monitor and record the internet connection condition even when I am not online.

    Read the article

  • cocos2d-x and handling touch events

    - by Jason
    I have my sprites on screen and I have a vector that stores each sprite. Can a CCSprite* handle a touch event? Or just the CCLayer*? What is the best way to decide what sprite was touched? Should I store the coordinates of where the sprite is (in the sprite class) and when I get the event, see if where the user touched is where the sprite is by looking through the vector and getting each sprites current coordinates? UPDATE: I subclass CCSprite: class Field : public cocos2d::CCSprite, public cocos2d::CCTargetedTouchDelegate and I implement functions: cocos2d::CCRect rect(); virtual void onEnter(); virtual void onExit(); bool containsTouchLocation(cocos2d::CCTouch* touch); virtual bool ccTouchBegan(cocos2d::CCTouch* touch, cocos2d::CCEvent* event); virtual void ccTouchMoved(cocos2d::CCTouch* touch, cocos2d::CCEvent* event); virtual void ccTouchEnded(cocos2d::CCTouch* touch, cocos2d::CCEvent* event); virtual void touchDelegateRetain(); virtual void touchDelegateRelease(); I put CCLOG statements in each one and I dont hit them! When I touch the CCLayer this sprite is on though I do hit those in the class that implements the Layer and puts these sprites on the layer.

    Read the article

  • Exchange migration to 2007 making Outlook 2003 unable to read meeting requests

    - by Kvad
    Hi, We are currently moving from Exchange 2003 to 2007 (8.2 build 176.2). We have encounted an issue with one user. In Outlook 2003 when getting a meeting request: "Can't open this item. Could not complete the operation. One or more parameter values are nto valid." The item cannot be previewed in the reading pane either. The item can be viewed in OWA and iPhone fine. I've tried with cache mode off and on. Different computers. Same issue. There are the following entries on the account: SMTP [email protected] [email protected] X400 C=AU;A= ;P=Company Name;O=Exchange;S=LastName;G=FirstName; I'm loathe to recreate the account. This will be an extreme last resort. Any ideas? Thanks in advance.

    Read the article

  • Microsoft Office 2013 Issue

    - by Liz
    A few days ago I opened my microsoft office programs and discovered taht they are missing the editing icons at the top, some of them will appear if you scroll over them, but not all. Also, in PowerPoint the slides show in the side window with a red "x" I have tried to uninstall and reinstall office 2013, but I have had no luck. This issue is in every office program (excel, PP, word, access, outlook, etc). I also can't see the text when I type. Its there, I can see it when I print the document, but nothing on the screen. Does anyone have a solution for this issue??

    Read the article

  • Running perfmon continuously with periodic reports

    - by Sal
    I have a question very similar to this one, but I want to continuously run perfmon, during reboots and throughout the day. Further, I'd like to generate a perfmon report every 10 mins or so. The original question tells me how to run perfmon when the server is restarted, but I don't know how to make perfmon continuously run while throwing periodic files. I've tried setting it as a scheduled task that needs to be done every 10 mins, but this is too sloppy, and when the scheduled task kicks another instance, the current perfmon report writer crashes, and I get a garbage report. I've also tried writing a sloppy batch script that would fire off the task at scheduled intervals, but this is the same problem as the scheduled task. I'm sure I'm just missing something silly, but I don't see it. Ideas? (If it helps, I'm running Windows 7 locally, and I'm trying to set up the processes for boxes running Windows 2008.)

    Read the article

  • Desktop Fun: Merry Christmas Wallpaper Collection [Bonus Edition]

    - by Asian Angel
    Are you ready for all of the gifts, assorted goodies, and great food that are a part of Christmas? As part of the build-up to the festivities, we have a larger than normal set of wallpapers to help add those final bits of holiday cheer and decoration to your desktops. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. For more Christmas desktop goodness be sure to check out our Merry Christmas icon packs & fonts collections (links at bottom)! Note: You can download an additional wallpaper of Rudolph by himself here. Note: There are two wallpapers from “Frosty Returns” available here and here. Note: The Garfield image will need to be slightly sharpened in a photo program and placed on a background to increase the height. Desktop Fun: Merry Christmas Icon Packs Desktop Fun: Merry Christmas Fonts Looking for more Merry Christmas wallpapers? Browse through our 2009 collection here: Awesome Holiday Themed Desktop Wallpapers For more wallpapers be certain to see our great collections in the Desktop Fun section. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation

    Read the article

  • How to create add Oracle Weblogic's NodeManager as a service to xinetd?

    - by Neuquino
    I'm trying to add NodeManager to start automatically when system boots In Oracle® Fusion Middleware Node Manager Administrator's Guide there is this template: # default: off # description:nodemanager as a service service nodemgrsvc { type = UNLISTED disable = no socket_type = stream protocol = tcp wait = yes user = <username> port = 5556 flags = NOLIBWRAP log_on_success += DURATION HOST USERID server = <path-to-jave>/java env = CLASSPATH=<cp> LD_LIBRARY_PATH=<ldpath> server_args = -client -DNodeManagerHome=<NMHome> <java options> <nodemanager options> weblogic.NodeManager -v } I don't know how to fill: cp ldpath java_options nodemanager options Do you have any xinetd script example to start nodemanager? Thanks in advance.

    Read the article

  • SOLVED: network issue ubuntu 8.04 in vmware esx

    - by hoberion
    ok, this is really pissing me off I have one ubuntu 8.04 instance running on vmware (esx) which decided after a reboot to stop resolving dns requests, I also cant connect to it using ssh although I can ping the server and its really that server (when I shutdown the server the ping also stops) stuff I tried: - reboot again :) - nslookup - serverip - setting networking to dhcp - offering some cute kittens to lucifer - removing the virtual nic and adding another (to get a different mac) - migrating the instance to another esx host - drinking 20 cups of espresso - stopped all services - running dnsmasq on another server and connecting to that dns - tcpdumping - disabling ip6 symptoms: cant resolve anything nslookup just says "no servers found..." although I can ping the servers traceroute to gateway doesnt work (even with traceroute -4 -n gatewayip) collegues laughing at me any thoughts solved it: a collegue told me to upgrade/reinstall the vmware tools, I did and it solved my issue after rebooting

    Read the article

  • An end to the static &hellip;

    - by Dave Oliver
    Last October I learnt my company wanted to put together a new blog/social networking policy. I decided that out of respect for my employer I wouldn’t blog until this was sorted out. This was perhaps was an easy decision to make as I was separating from my ex-wife at the time and frankly needed the time to concentrate on other things. So now the company has a brand new policy and I’m back into the dating game I thought I would blow off the cobwebs and get back to what I enjoy doing. First and foremost SQL Server 2008 R2 is almost here and to mark that fact I will be in London on Thursday at the Microsoft UK Tech-Day’s event. The subjects I most want to see are … Power Pivot – this is such an exciting technology! I’ve been a fan of Qlikview for years so it will be good to see how it compares SQL Azure – Cloud Computing is big right now, so it will be interesting to see what the RTM product can do. I have afew ideas for its use and will be interesting to see if SQL Azure is the right product … more on this in the next few weeks. Master Data Services – This is one of those technologies that Microsoft hasn’t been making much noise about … and frankly should have because it is a game changer. Hmmm, queue future “What is … ?” post StreamInsight – An exciting events technology, again another “What is … ?” post is around the corner on that. So, you thought that SQL Server 2008 R2 was just a release to make sure the years between SQL Server 2008 and SQL Server 2010 weren’t so long? I am however disappointed that Clustering across Subnets didn’t make it and not sure if Control Points made it but all will be revealed later on this week. Till then I will have to wait! Technorati Tags: Microsoft,Techdays,SQL Server 2008 R2

    Read the article

  • NRF Online Merchandising Workshop: Where Online Retailers Are Focusing for Holiday and Beyond

    - by Rose Spicer-Oracle
    0 0 1 1204 6863 Oracle Corporation 57 16 8051 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Last month we attended the NRF Online Merchandising Workshop in LA, and it was a great opportunity to catch up with our customers, meet new retailers, and hear some great presentations from VF Corporation, Zazzle, Julep Beauty, Backcountry, eBags and more. The one-on-one conversations with Merchants and the keynote presentations carry the same themes across companies of all sizes and across verticals. With only 125 days left (and counting) until Black Friday, these conversations provided some great insight in to what’s top of mind for retailers during the most stressful time of their year, and a sneak peek in to what they will deliver this holiday season.  Some of the most popular topics were: When to start promoting for holiday: seems like a funny conversation to have in July, but a number of retailers said they already had their holiday shopping gift guides live on their site, and it was attracting a significant portion of their onsite traffic. When it comes to timing, most retailers were questioning when to begin their holiday promotions -- carefully balancing when to release pricing and specials, and knowing that customers are holding out for last-minute deals and price drops. Many retailers noted the frustrations around transparent pricing by Amazon and a few other mega-retailers last year, publishing their “lowest prices of the season” as early as October – ensuring shoppers that those prices were the best they could get all season long. Many retailers felt their hands were forced to drop prices. Others kept their set pricing with negative customer reaction, causing some to miss their holiday goals. The pressure is on, and most retailers identified November 1 as their target start date for the holiday promotions blitz. Some are even waiting for the big guys to release their “lowest prices of the season” guides and will then follow suit.      Attribution is tough – and a huge focus: understanding the path to conversion is a tough nut to crack, especially in the new omnichannel world where consumers use multiple touchpoints to make a single purchase, and internal management wants to know hard data. This has lead many retailers to invest in attribution; carefully tracking their online marketing efforts to determine what gets “credit” for the sale, instead of giving credit to the “last click.” Retailers noted that it is very difficult to determine the numbers when online and offline worlds collide – like when a shopper uses digital channels for research and then makes a purchase in a store. As one of the presenters from The North Face mentioned in her keynote, a key to enabling better customer service and satisfaction when it comes to converged online and offline sales is training the in-store staff, and creating a culture where it eventually “doesn’t matter what group gets the credit” if they all add to the sale. No doubt, the area of attribution will be a big area of retail investment in the coming years.      How to plan for the converged world: planning to ensure inventory gets where it needs to be was another concern. In conversations with retailers, we advised them to analyze customer patterns: where shoppers purchase items, where the items were sourced from and even where items are returned. This analysis is very valuable in determining inventory plans. From there, retailers can more accurately plan and allocate inventory to support both the online and offline customer behavior. As we head into the holiday season, the need for accurate enterprise-wide inventory visibility, and providing that information to associates, is even more critical to the brand-wide customer experience.       Improving the search / navigation / usability of the site(s): Aside from some of the big ideas and standard holiday pricing pressure, most conversations we had centered around continuing to improve the basics of the site. Reinvesting in search and navigation came up time and time again (FitForCommerce blogged about what a big topic it was at the event as well). Obviously getting shoppers on their path quickly and allowing them to find what they need fast is critical, but it was definitely interesting to hear just how much effort is still going in to honing the search and navigation experience. Adding new elements to search and navigation like typeahed, inventive navigation refinements, and new navigation categories like gift guides, specialized boutiques and flash sales were top of mind, in addition to searchandising and making search-driven product recommendations. (Oracle can help!)       Reducing cart abandonment: always a hot topic that is top of mind for every online retailer. Getting shoppers to the cart is often less then half the battle; getting them to click “buy” and complete the transaction is much more difficult. While retailers carefully study the checkout process and where shoppers tend to bounce, they know that how they design their checkout page is critical. We’re all online shoppers in our personal lives and we know how frustrating it can be when total prices are not transparent (i.e. shipping, processing, taxes is not included until the very last possible screen before clicking that buy button). Online retailers are struggling with where in the checkout process to surface the total price to be charged to reduce cart abandonment, while not showing the total figure too early in the process that it keeps shoppers from getting to checkout altogether. Recent research shows that providing total pricing prior to the checkout process dramatically reduces cart abandonment – as it serves as a filter to those shopping within a specific price band. Much of the cart abandonment discussion leads us to…       The free shipping / free returns question: it’s no secret that because of Amazon and programs like Prime, consumers expect free shipping, much to the chagrin of the smaller retailer. The reality is that if you’re not a mega-retailer, shipping is an expensive part of doing business that doesn’t allow most retailers to keep their prices low and offer free shipping. This has many retailers venturing out on the “free returns” path, especially in apparel. A number of retailers we spoke with are testing a flat rate shipping fee with free returns to see if they can crack the price threshold where shoppers are willing to pay for shipping with an added service. But, free shipping remains king.      Social ads and retargeting: they are working, but do they turn off consumers? That’s the big question. Every retailer we spoke with during a roundtable on the topic said that social ads and retargeting (where that pair of boots you’re been eyeing on a site magically follows you around the Internet) work and are meeting campaign goals. The larger question many retailers are asking is if this type of tactic is turning off a large number of shoppers, even if these campaigns are meeting their early goals. Retailers also mentioned that Facebook ads are working very well for them, especially when it comes to new customer acquisition, serving as a complimentary a channel to SEO when it comes to engaging new customers. While there are always new things to experiment with in retail, standard challenges are top of mind as retailers scramble to get ready for holiday. It will undoubtedly be another record-breaking online shopping season, but as retailers get more and more advanced with each Black Friday, expect some exciting things. This excitement needs to be backed by sound solutions and optimized operations. Then again, consumers are expecting more than ever, so I don’t doubt that retailers are already thinking about the possibilities of holiday 2015… and beyond. Customers who read this article, also found value in the following stories: Personalization for Retail: http://blogs.oracle.com/retail/entry/personalization_for_retailShop Direct User Experience Focus Drives Sales:https://blogs.oracle.com/retail/entry/shop_direct_user_experience_focusMaking Waves: Australian Online Retailer SurfStitch: https://blogs.oracle.com/oracleretail/entry/surf_stitchWhat’s new in Oracle Commerce v11.1 for RetailWhat the Content+Commerce Equation is Missing

    Read the article

  • Unable to suspend with FGLRX enabled

    - by schmmd
    I am unable to suspend in a fully updated (as of yesterday, 29 March 2011) Ubuntu 10.10 installation (kernel 2.6.35-28). Following is a list of some of my hardware: Motherboard: Gigabyte GA-X58A-UD3R Video: Radeon HD-567X-YNF3 Initially, when I went to either Suspend or Hibernate the machine would almost go into suspend, but it would never power down. Instead it would bounce back to the login screen. This was due to a problem with the USB3 ports being unable to suspend (noticed this in /var/log/kern.log). Disabling the USB3 ports in the BIOS fixed this issue. Now Suspend and Hibernate power down the machine. It successfully awakens from Hibernate. However, it will not return from suspend. The mouse and keyboard are not powered and the monitor has no signal. These devices are still not powered after a restart. I must power-cycle the machine. The pm-suspend log ends after it states that it entered suspend (i.e. there is no information any resume code running). I discovered that acpitool -s suspends the machine and resumes successfully exactly once. The second time the machine will not resume. I am not sure how these two tools handle suspend differently. UPDATE: the problem was introduced somewhere between 2.6.35-22 and 2.6.35-28. I have both kernels install presently. Suspend works fine with 2.6.35-22 but not with 2.6.38-28.

    Read the article

  • Windows 2k3 server as a KVM client

    - by Peter NUnn
    Just wondering if anyone else has had issues installing Windows 2K3 server under KVM. I have tried a few times tonight and keep getting "not a supported platform" when the installation first boots. I've used i686, had acpi and apic off and on, given it 4GB ram, 200GB hard disk and it fails every time. I've done some hunting around, but can't find anything conclusive on google. It is listed as a supported client on the KVM site. Host is Ubuntu 10.04 64Bit, qemu-kmv hypervisor. Drivers, I'm not sure what your asking for there, but the disk is a standard (I believe) 32 bit Win2K3 server. I'm trying to install a bulk standard server install. I've done it with win2K8 no problems, but this 2k3 install is failing every time.

    Read the article

  • exporting bind and keyframe bone poses from blender to use in OpenGL

    - by SaldaVonSchwartz
    I'm having a hard time trying to understand how exactly Blender's concept of bone transforms maps to the usual math of skinning (which I'm implementing in an OpenGL-based engine of sorts). Or I'm missing out something in the math.. It's gonna be long, but here's as much background as I can think of. First, a few notes and assumptions: I'm using column-major order and multiply from right to left. So for instance, vertex v transformed by matrix A and then further transformed by matrix B would be: v' = BAv. This also means whenever I export a matrix from blender through python, I export it (in text format) in 4 lines, each representing a column. This is so I can then I can read them back into my engine like this: if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[0], &skeleton.joints[currentJointIndex].inverseBindTransform.m[1], &skeleton.joints[currentJointIndex].inverseBindTransform.m[2], &skeleton.joints[currentJointIndex].inverseBindTransform.m[3])) { if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[4], &skeleton.joints[currentJointIndex].inverseBindTransform.m[5], &skeleton.joints[currentJointIndex].inverseBindTransform.m[6], &skeleton.joints[currentJointIndex].inverseBindTransform.m[7])) { if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[8], &skeleton.joints[currentJointIndex].inverseBindTransform.m[9], &skeleton.joints[currentJointIndex].inverseBindTransform.m[10], &skeleton.joints[currentJointIndex].inverseBindTransform.m[11])) { if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[12], &skeleton.joints[currentJointIndex].inverseBindTransform.m[13], &skeleton.joints[currentJointIndex].inverseBindTransform.m[14], &skeleton.joints[currentJointIndex].inverseBindTransform.m[15])) { I'm simplifying the code I show because otherwise it would make things unnecessarily harder (in the context of my question) to explain / follow. Please refrain from making remarks related to optimizations. This is not final code. Having said that, if I understand correctly, the basic idea of skinning/animation is: I have a a mesh made up of vertices I have the mesh model-world transform W I have my joints, which are really just transforms from each joint's space to its parent's space. I'll call these transforms Bj meaning matrix which takes from joint j's bind pose to joint j-1's bind pose. For each of these, I actually import their inverse to the engine, Bj^-1. I have keyframes each containing a set of current poses Cj for each joint J. These are initially imported to my engine in TQS format but after (S)LERPING them I compose them into Cj matrices which are equivalent to the Bjs (not the Bj^-1 ones) only that for the current spacial configurations of each joint at that frame. Given the above, the "skeletal animation algorithm is" On each frame: check how much time has elpased and compute the resulting current time in the animation, from 0 meaning frame 0 to 1, meaning the end of the animation. (Oh and I'm looping forever so the time is mod(total duration)) for each joint: 1 -calculate its world inverse bind pose, that is Bj_w^-1 = Bj^-1 Bj-1^-1 ... B0^-1 2 -use the current animation time to LERP the componets of the TQS and come up with an interpolated current pose matrix Cj which should transform from the joints current configuration space to world space. Similar to what I did to get the world version of the inverse bind poses, I come up with the joint's world current pose, Cj_w = C0 C1 ... Cj 3 -now that I have world versions of Bj and Cj, I store this joint's world- skinning matrix K_wj = Cj_w Bj_w^-1. The above is roughly implemented like so: - (void)update:(NSTimeInterval)elapsedTime { static double time = 0; time = fmod((time + elapsedTime),1.); uint16_t LERPKeyframeNumber = 60 * time; uint16_t lkeyframeNumber = 0; uint16_t lkeyframeIndex = 0; uint16_t rkeyframeNumber = 0; uint16_t rkeyframeIndex = 0; for (int i = 0; i < aClip.keyframesCount; i++) { uint16_t keyframeNumber = aClip.keyframes[i].number; if (keyframeNumber <= LERPKeyframeNumber) { lkeyframeIndex = i; lkeyframeNumber = keyframeNumber; } else { rkeyframeIndex = i; rkeyframeNumber = keyframeNumber; break; } } double lTime = lkeyframeNumber / 60.; double rTime = rkeyframeNumber / 60.; double blendFactor = (time - lTime) / (rTime - lTime); GLKMatrix4 bindPosePalette[aSkeleton.jointsCount]; GLKMatrix4 currentPosePalette[aSkeleton.jointsCount]; for (int i = 0; i < aSkeleton.jointsCount; i++) { F3DETQSType& lPose = aClip.keyframes[lkeyframeIndex].skeletonPose.jointPoses[i]; F3DETQSType& rPose = aClip.keyframes[rkeyframeIndex].skeletonPose.jointPoses[i]; GLKVector3 LERPTranslation = GLKVector3Lerp(lPose.t, rPose.t, blendFactor); GLKQuaternion SLERPRotation = GLKQuaternionSlerp(lPose.q, rPose.q, blendFactor); GLKVector3 LERPScaling = GLKVector3Lerp(lPose.s, rPose.s, blendFactor); GLKMatrix4 currentTransform = GLKMatrix4MakeWithQuaternion(SLERPRotation); currentTransform = GLKMatrix4Multiply(currentTransform, GLKMatrix4MakeTranslation(LERPTranslation.x, LERPTranslation.y, LERPTranslation.z)); currentTransform = GLKMatrix4Multiply(currentTransform, GLKMatrix4MakeScale(LERPScaling.x, LERPScaling.y, LERPScaling.z)); if (aSkeleton.joints[i].parentIndex == -1) { bindPosePalette[i] = aSkeleton.joints[i].inverseBindTransform; currentPosePalette[i] = currentTransform; } else { bindPosePalette[i] = GLKMatrix4Multiply(aSkeleton.joints[i].inverseBindTransform, bindPosePalette[aSkeleton.joints[i].parentIndex]); currentPosePalette[i] = GLKMatrix4Multiply(currentPosePalette[aSkeleton.joints[i].parentIndex], currentTransform); } aSkeleton.skinningPalette[i] = GLKMatrix4Multiply(currentPosePalette[i], bindPosePalette[i]); } } At this point, I should have my skinning palette. So on each frame in my vertex shader, I do: uniform mat4 modelMatrix; uniform mat4 projectionMatrix; uniform mat3 normalMatrix; uniform mat4 skinningPalette[6]; attribute vec4 position; attribute vec3 normal; attribute vec2 tCoordinates; attribute vec4 jointsWeights; attribute vec4 jointsIndices; varying highp vec2 tCoordinatesVarying; varying highp float lIntensity; void main() { vec3 eyeNormal = normalize(normalMatrix * normal); vec3 lightPosition = vec3(0., 0., 2.); lIntensity = max(0.0, dot(eyeNormal, normalize(lightPosition))); tCoordinatesVarying = tCoordinates; vec4 skinnedVertexPosition = vec4(0.); for (int i = 0; i < 4; i++) { skinnedVertexPosition += jointsWeights[i] * skinningPalette[int(jointsIndices[i])] * position; } gl_Position = projectionMatrix * modelMatrix * skinnedVertexPosition; } The result: The mesh parts that are supposed to animate do animate and follow the expected motion, however, the rotations are messed up in terms of orientations. That is, the mesh is not translated somewhere else or scaled in any way, but the orientations of rotations seem to be off. So a few observations: In the above shader notice I actually did not multiply the vertices by the mesh modelMatrix (the one which would take them to model or world or global space, whichever you prefer, since there is no parent to the mesh itself other than "the world") until after skinning. This is contrary to what I implied in the theory: if my skinning matrix takes vertices from model to joint and back to model space, I'd think the vertices should already be premultiplied by the mesh transform. But if I do so, I just get a black screen. As far as exporting the joints from Blender, my python script exports for each armature bone in bind pose, it's matrix in this way: def DFSJointTraversal(file, skeleton, jointList): for joint in jointList: poseJoint = skeleton.pose.bones[joint.name] jointTransform = poseJoint.matrix.inverted() file.write('Joint ' + joint.name + ' Transform {\n') for col in jointTransform.col: file.write('{:9f} {:9f} {:9f} {:9f}\n'.format(col[0], col[1], col[2], col[3])) DFSJointTraversal(file, skeleton, joint.children) file.write('}\n') And for current / keyframe poses (assuming I'm in the right keyframe): def exportAnimations(filepath): # Only one skeleton per scene objList = [object for object in bpy.context.scene.objects if object.type == 'ARMATURE'] if len(objList) == 0: return elif len(objList) > 1: return #raise exception? dialog box? skeleton = objList[0] jointNames = [bone.name for bone in skeleton.data.bones] for action in bpy.data.actions: # One animation clip per action in Blender, named as the action animationClipFilePath = filepath[0 : filepath.rindex('/') + 1] + action.name + ".aClip" file = open(animationClipFilePath, 'w') file.write('target skeleton: ' + skeleton.name + '\n') file.write('joints count: {:d}'.format(len(jointNames)) + '\n') skeleton.animation_data.action = action keyframeNum = max([len(fcurve.keyframe_points) for fcurve in action.fcurves]) keyframes = [] for fcurve in action.fcurves: for keyframe in fcurve.keyframe_points: keyframes.append(keyframe.co[0]) keyframes = set(keyframes) keyframes = [kf for kf in keyframes] keyframes.sort() file.write('keyframes count: {:d}'.format(len(keyframes)) + '\n') for kfIndex in keyframes: bpy.context.scene.frame_set(kfIndex) file.write('keyframe: {:d}\n'.format(int(kfIndex))) for i in range(0, len(skeleton.data.bones)): file.write('joint: {:d}\n'.format(i)) joint = skeleton.pose.bones[i] jointCurrentPoseTransform = joint.matrix translationV = jointCurrentPoseTransform.to_translation() rotationQ = jointCurrentPoseTransform.to_3x3().to_quaternion() scaleV = jointCurrentPoseTransform.to_scale() file.write('T {:9f} {:9f} {:9f}\n'.format(translationV[0], translationV[1], translationV[2])) file.write('Q {:9f} {:9f} {:9f} {:9f}\n'.format(rotationQ[1], rotationQ[2], rotationQ[3], rotationQ[0])) file.write('S {:9f} {:9f} {:9f}\n'.format(scaleV[0], scaleV[1], scaleV[2])) file.write('\n') file.close() Which I believe follow the theory explained at the beginning of my question. But then I checked out Blender's directX .x exporter for reference.. and what threw me off was that in the .x script they are exporting bind poses like so (transcribed using the same variable names I used so you can compare): if joint.parent: jointTransform = poseJoint.parent.matrix.inverted() else: jointTransform = Matrix() jointTransform *= poseJoint.matrix and exporting current keyframe poses like this: if joint.parent: jointCurrentPoseTransform = joint.parent.matrix.inverted() else: jointCurrentPoseTransform = Matrix() jointCurrentPoseTransform *= joint.matrix why are they using the parent's transform instead of the joint in question's? isn't the join transform assumed to exist in the context of a parent transform since after all it transforms from this joint's space to its parent's? Why are they concatenating in the same order for both bind poses and keyframe poses? If these two are then supposed to be concatenated with each other to cancel out the change of basis? Anyway, any ideas are appreciated.

    Read the article

  • PASS Summit Feedback

    - by Rob Farley
    PASS Feedback came in last week. I also saw my dentist for some fillings... At the PASS Summit this year, I delivered a couple of regular sessions and a Lightning Talk. People told me they enjoyed it, but when the rankings came out, they showed that I didn’t score particularly well. Brent Ozar was keen to discuss it with me. Brent: PASS speaker feedback is out. You did two sessions and a Lightning Talk. How did you go? Rob: Not so well actually, thanks for asking. Brent: Ha! Sorry. Of course you know that's why I wanted to discuss this with you. I was in one of your sessions at SQLBits in the UK a month before PASS, and I thought you rocked. You've got a really good and distinctive delivery style.  Then I noticed your talks were ranked in the bottom quarter of the Summit ratings and wanted to discuss it. Rob: Yeah, I know. You did ask me if we could do this...  I should explain – my presentation style is not the stereotypical IT conference one. I throw in jokes, and try to engage the audience thoroughly. I find many talks amazingly dry, and I guess I try to buck that trend. I also run training courses, and find that I get a lot of feedback from people thanking me for keeping things interesting. That said, I also get feedback criticising me for my style, and that’s basically what’s happened here. For the rest of this discussion, let’s focus on my talk about the Incredible Shrinking Execution Plan, which I considered to be my main talk. Brent: I thought that session title was the very best one at the entire Summit, and I had it on my recommended sessions list.  In four words, you managed to sum up the topic and your sense of humor.  I read that and immediately thought, "People need to be in this session," and then it didn't score well.  Tell me about your scores. Rob: The questions on the feedback form covered the usefulness of the information, the speaker’s presentation skills, their knowledge of the subject, how well the session was described, the amount of time allocated, and the quality of the presentation materials. Brent: Presentation materials? But you don’t do slides.  Did they rate your thong? Rob: No-one saw my flip-flops in this talk, Brent. I created a script in Management Studio, and published that afterwards, but I think people will have scored that question based on the lack of slides. I wasn’t expecting to do particularly well on that one. That was the only section that didn’t have 5/5 as the most popular score. Brent: See, that sucks, because cookbook-style scripts are often some of my favorites.  Adam Machanic's Service Broker workbench series helped me immensely when I was prepping for the MCM.  As an attendee, I'd rather have a commented script than a slide deck.  So how did you rank so low? Rob: When I look at the scores that you got (based on your blog post), you got very few scores below 3 – people that felt strong enough about your talk to post a negative score. In my scores, between 5% and 10% were below 3 (except on the question about whether I knew my stuff – I guess I came as knowledgeable). Brent: Wow – so quite a few people really didn’t like your talk then? Rob: Yeah. Mind you, based on the comments, some people really loved it. I’d like to think that there would be a certain portion of the room who may have rated the talk as one of the best of the conference. Some of my comments included “amazing!”, “Best presentation so far!”, “Wow, best session yet”, “fantastic” and “Outstanding!”. I think lots of talks can be “Great”, but not so many talks can be “Outstanding” without the word losing its meaning. One wrote “Pretty amazing presentation, considering it was completely extemporaneous.” Brent: Extemporaneous, eh? Rob: Yeah. I guess they don’t realise how much preparation goes into coming across as unprepared. In many ways it’s much easier to give a written speech than to deliver a presentation without slides as a prompt. Brent: That delivery style, the really relaxed, casual, college-professor approach was one of the things I really liked about your presentation at SQLbits.  As somebody who presents a lot, I "get" it - I know how hard it is to come off as relaxed and comfortable with your own material.  It's like improv done by jazz players and comedians - if you've never tried it, you don't realize how hard it is.  People also don't realize how hard it is to make a tough subject fun. Rob: Yeah well... There will be people writing comments on this post that say I wasn't trying to make the subject fun, and that I was making it all about me. Sometimes the style works, sometimes it doesn't. Most of the comments mentioned the fact that I tell jokes, some in a nice way, but some not so much (and it wasn't just a PASS thing - that's the mix of feedback I generally get). One comment at PASS was: “great stand up comedian - not what I'm looking for at pass”, and there were certainly a few that said “too many jokes”. I’m not trying to do stand-up – jokes are my way of engaging with the audience while I demonstrate some of the amazing things that the Query Optimizer can do if you write your queries the right way. Some people didn’t think it was technical enough, but I’ve also had some people tell me that the concepts I’m explaining are deep and profound. Brent: To me, that's a hallmark of a great explanation - when someone says, "But of course it has to work that way - how could it work any other way?  It seems so simple and logical."  Well, sure it does when it's explained correctly, but now pick up any number of thick SQL Server books and try to understand the Redundant Joins concept.  I guarantee it'll take more than 45 minutes. Rob: Some people in my audiences realise that, but definitely not everyone. There's only so much you can tell someone that something is profound. Generally it's something that they either have an epiphany on or not. I like to lull my audience into knowing what's going on, and do something that surprises them. Gain their trust, build a rapport, and then show them the deeper truth of what just happened. Brent: So you've learned your lesson about presentation scores, right?  From here on out, you're going to be dry, humorless, and all your presentations will consist of you reading bullet points off the screen. Rob: No Brent, I’m not. I'm also not going to suggest that most presentations at PASS are like that. No-one tries to present like that. There's a big space to occupy between what "dry and humourless" and me. My difference is to focus on the relationship I have with the crowd, rather than focussing on delivering the perfect session. I want to see people smiling and know they're relaxed. I think most presenters focus on the material, which is completely reasonable and safe. I remember once hearing someone talking about product creation. They talked about mediocrity. They said that one of the worst things that people can ever say about your product is that it’s “good”. What you want is for 10% of the world to love it enough to want to buy it. If 10% the world gave me a dollar, I’d have more money than I could ever use (assuming it wasn’t the SAME dollar they were giving me I guess). Brent: It's the Raving Fans theory.  It's better to have a small number of raving customers than a large number of almost-but-not-really customers who don't care that much about your product or service.  I know exactly how you feel - when I got survey feedback from my Quest video presentation when I was dressed up in a Richard Simmons costume, some of the attendees said I was unprofessional and distracting.  Some of the attendees couldn't get enough and Photoshopped all kinds of stuff into the screen captures.  On a whole, I probably didn't score that well, and I'm fine with that.  It sucks to look at the scores though - do those lower scores bother you? Rob: Of course they do. It hurts deeply. I open myself up and give presentations in a very personal way. All presenters do that, and we all feel the pain of negative feedback. I hate coming 146th & 162nd out of 185, but have to acknowledge that many sessions did worse still. Plus, once I feel the wounds have healed, I’ll be able to remember that there are people in the world that rave about my presentation style, and figure that people will hopefully talk about me. One day maybe those people that don’t like my presentation style will stay away and I might be able to score better. You don’t pay to hear country music if you prefer western... Lots of people find chili too spicy, but it’s still a popular food. Brent: But don’t you want to appeal to everyone? Rob: I do, but I don’t want to be lukewarm as in Revelation 3:16. I’d rather disgust and be discussed. Well, maybe not ‘disgust’, but I don’t want to conform. Conformity just isn’t the same any more. I’m not sure I’ve ever been one to do that. I try not to offend, but definitely like to be different. Brent: Count me among your raving fans, sir.  Where can we see you next? Rob: Considering I live in Adelaide in Australia, I’m not about to appear at anyone’s local SQL Saturday. I’m still trying to plan which events I’ll get to in 2011. I’ve submitted abstracts for TechEd North America, but won’t hold my breath. I’m also considering the SQLBits conferences in the UK in April, PASS in October, and I’m sure I’ll do some LiveMeeting presentations for user groups. Online, people download some of my recent SQLBits presentations at http://bit.ly/RFSarg and http://bit.ly/Simplification though. And they can download a 5-minute MP3 of my Lightning Talk at http://www.lobsterpot.com.au/files/Collation.mp3, in which I try to explain the idea behind collation, using thongs as an example. Brent: I was in the audience for http://bit.ly/RFSarg. That was a great presentation. Rob: Thanks, Brent. Now where’s my dollar?

    Read the article

  • Don’t Sleep Keeps Your Windows Machine Awake

    - by ETC
    Don’t Sleep is an ultra lightweight and portable application that fills a niche need perfect: sometimes you need to temporarily keep your Windows machine from shutting down or power saving without making any permanent changes to your power profile. Fire up portable Don’t Sleep and tell it how long you want it to stop your computer from shutting down, going to sleep (standby/hibernation), and/or keeping the monitor on. At the end of the monitoring period you can have it turn itself off, stay on but stop blocking, or shut down your computer. It’s a great application for those times you need to alter how your computer handles hibernation mode, activating the screensaver, or other automated tasks without making any permanent changes to your power profile or other settings. Hit up the link below to read more and grab a copy. Don’t Sleep is freeware, Windows only. Don’t Sleep [via The Portable Freeware Collection] Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 Access the Options for Your Favorite Extensions Easier in Firefox Don’t Sleep Keeps Your Windows Machine Awake DropSpace Syncs Android Files to Dropbox Field of Poppies Wallpaper The History Of Operating Systems [Infographic] DriveSafe.ly Reads Your Text Messages Aloud

    Read the article

  • procmail issue - splitting delivery of one address based on destination domain

    - by warren
    I use procmail to handle some serverside mail processing. I am trying to setup one email address on a server that support multiple domains (in the example below, domain.net and domain.com). I want mail sent to [email protected] to go to bob and mail sent to [email protected] to go to sara. VERBOSE=off LOGFILE=/dev/null :0 * .domain.net bob :0 * .domain.com sara The above recipe seems to work quite well in that it catches incoming mail to domain.net and forwards it to bob. However, instead of forwarding mail to domain.com to sara, it creates a file in /home/user called sara. What am I doing wrong on this?

    Read the article

  • 30 seconds from File|New to a new CRUD Silverlight application with Teleriks new LINQ Implementation

    Last month Telerik released its new LINQ implementation and last week we released the new Data Services Wizard for Telerik OpenAccess, which supports both traditional OpenAccess entities and the new LINQ implementation. I will a walk you through the process where you can connect to a database, add a new domain model, wrap it in a new WCF Data Services (Astoria) service, and add a CRUD enabled Silverlight application. All in 30 seconds! Step 1: Build your Domain Model (20 seconds) Open Visual Studio 2010 RTM (or 2008) and add a new ASP.NET project. Right click on the project and select Add|New Item and choose Telerk OpenAccess Domain Model from the item template list. The Visual Entity Designer wizard comes up. Select the database server you are using in the first screen (SQL Server, Oracle, SQL Azure, MySQL, etc) and then also build your database connection string. Next select the tables, views, and stored procedures you want ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How can I recover data after mistakenly clean-installed 12.04 over 11.10?

    - by T.Kannan
    I recently got a Ubuntu 12.04 LTS i386 DVD Rom and Ubuntu 12.04 LTS alternate cd from the zyxware.com because I don't have a broadband personal connection at home, I am using only the office INTERNET. I have a Dell Inspiron Laptop core 2 duo Processor with 2GB Ram dual boot of Ubuntu 11.10 and Windows Vista. I tried to upgrade My existing fully equipped streamlined Ubuntu 11.10 OS with lot of documents and socialized application packages which have been frequently used by me for the last one year. First I tried to install upgradation from the Ubuntu 12.04 LTS alternate cd while ubuntu 11.10 is on, but every time I got a error message and I couldn't upgrade either thro desktop or through terminal. Then I tried Ubuntu 12.04 LTS i386 DVD the boot option to DVD, I tried to upgrade from existing 11.10 to 12.04 LTS Option, then Upgrading Installation started well and finally got a message Installation completed successfully, Asked for reboot, I rebooted then I have hot a Ubuntu 12.04 LTS Login and I logged on, I have got a big shock that there is everything washed away in the home folders ( all datas, Music collections and vedios etc), all the application installed early in 11.10 were gone nothing left. Now I have got only 12.04 LTS, even It is asking for me to update around 350 mb through net connection. How It was a crazy Ubuntu, It is not a up-gradation, new installation is not it? I loosed everthing, at the end I got the same desktop screen like Ubuntu 11.10. Anybody knows about what gone wrong and if any possibility to recover my datas? Please help me. I want to Know that which method is stable to Upgrade existing Ubunt11.10

    Read the article

  • What I&rsquo;m Reading &ndash; 2 &ndash; Microsoft Silverlight 4 Data and Services Cookbook

    - by Dave Campbell
    A while back I mentioned that I had a couple books on my desktop that I’ve been “shooting holes” in … in other words, reading pieces that are interesting at the time, or looking something up rather than starting at the front and heading for the back. The book I want to mention today is Microsoft Silverlight 4 Data and Services Cookbook : by Gill Cleeren and Kevin Dockx. As opposed to the authors of the last book I reviewed, I don’t personally know Gill or Kevin, but I’ve blogged a lot of their articles… both prolific and on-topic writers. The ‘recipe’ style of the book shouldn’t put you off. It’s more of the way the chapters are laid out than anything else and once you see one of them, you recognize the pattern. This is a great eBook to have around to open when you need to find something useful. As with the other PACKT book I talked about have the eBook because for technical material, at least lately, I’ve gravitated toward that. I can have it with me on a USB stick at work, or at home. Read the free chapter then check out their blogs. You may be surprised by some of the items you’ll find inside the covers. One such nugget is one I don’t think I’ve seen blogged:  “Converting You Existing Applications to Use Silverlight”. Another good job! Technorati Tags: Silverlight 4

    Read the article

  • Port Forwarding on 80 vs. 8080

    - by Chadworthington
    I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ This web site works: http://localhost:8080/tfs/web/ I setup my router to forward port 80 to the PC hosting the web site. I also forward port 8080 to the same box. But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

    Read the article

  • LCD monitor flickering

    - by stickmangumby
    I've recently got an LCD monitor and it is occasionally 'flickering' colors very noticeably. It's not a new monitor, but the person I'm borrowing it from hasn't had any trouble with it. The flickering occurs across operating systems and screen resolutions. I'm pretty sure it's related to dirty power - it often happens when fluorescent lights get turned on or the fridge starts, but not always. Is this likely to be the cause of the problem? Is there any good way to test this? Is there anything that can be done about bad grounding?

    Read the article

< Previous Page | 626 627 628 629 630 631 632 633 634 635 636 637  | Next Page >