Search Results

Search found 17063 results on 683 pages for 'window restore'.

Page 632/683 | < Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >

• Dual boot Ubuntu and Windows 7, I Can only boot ubuntu through recovery mode

  - by Alec

  I want to become a new user of Ubuntu, however this problem is preventing me. I have/had Window 7 professional on my computer. I recently looked into getting linux. I discovered dual-booting and decided to give it a try. First I created a bootable flash drive with ubuntu 12.10 64 bit. I then followed the instructions on: https://help.ubuntu.com/community/WindowsDualBoot after I finished going through the setup, my computer rebooted. After the reboot I was able to select Ubuntu, advanced options for Ubuntu, 2 memory tests, and windows 7 (loader). So I chose Windows ( honestly i was more concerned that i still had everything on windows at this point). I then rebooted again and selected Ubuntu. When i selected Ubuntu, the background screen of Grub (the crimson/burgandy color) stayed for a few seconds then the screen went black: video here http://www.youtube.com/watch?v=6kKcG4sT7Lg&feature=plcp I tried again with the same results. so i redid the ubuntu install differently using http://www.liberiangeek.net/2012/10/dual-booting-windows-7-and-ubuntu-12-10-quantal-quetzal/. After rebooting the same thing happened. After that i was stumped, so i figured it could hurt to experiment. after all i backed up my windows 7 stuff, and i have the software disk. I tried booting in recovery mode under "advanced options for Ubuntu" and sure enough, after selecting continue to normal reboot it worked. So i updated and everything but when i rebooted it still wouldn't boot under Ubuntu. It would always boot after recovery mode. So i try installing 12.10 32 bit Ubuntu. the same problem keeps happening. I can still get to Ubuntu through recovery mode. so i went online and tried using the terminal (in ubuntu that i booted through recovery mode) when i was using it i discovered that "Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected" kept showing up. also i noticed a notification in the top right corner that looked like a do not enter sign. it said "an error occured, please run package manager from the right-click menu or apt-get in a terminal to see what is wrong. the error message was: 'ror in sitecustomize;set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected traceback (most recent called last): File "/usr/bin/lsb_release EOFError: EOF read where not expected 39;0' this usually means that your installed packages have unmet dependencies" Naturally i assumed this was what was causing my boot problems. I downloaded synaptic and updated everything and the error went away. but my boot problem was still a problem. so i go online find some things that have worked for others, like this Try to do this (in your terminal: sudo nano /etc/default/grub Look for: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Change it too : GRUB_CMDLINE_LINUX_DEFAULT="quiet" And update Grub: sudo update-grub This should fix stuff.) I did this and i still have the problem. sorry for the excessive explanation, please help.

  Read the article

• Using AdMob with Games that use Open GLES

  - by Vishal Kumar

  Can anyone help me integrating Admob to my game. I've used the badlogic framework by MarioZencher ... and My game is like the SuperJumper. I am unable to use AdMob after a lot of my attempts. I am new to android dev...please help me..I went thru a number of tutorials but not getting adds displayed ... I did the following... get the libraries and placed them properly My main.xml looks like this android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="@string/hello" / My Activity class onCreate method: public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); RelativeLayout layout = new RelativeLayout(this); adView = new AdView(this, AdSize.BANNER, "a1518637fe542a2"); AdRequest request = new AdRequest(); request.addTestDevice(AdRequest.TEST_EMULATOR); request.addTestDevice("D77E32324019F80A2CECEAAAAAAAAA"); adView.loadAd(request); layout.addView(glView); RelativeLayout.LayoutParams adParams = new RelativeLayout.LayoutParams(RelativeLayout.LayoutParams.WRAP_CONTENT, RelativeLayout.LayoutParams.WRAP_CONTENT); adParams.addRule(RelativeLayout.ALIGN_PARENT_BOTTOM); adParams.addRule(RelativeLayout.CENTER_IN_PARENT); layout.addView(adView, adParams); setContentView(layout); requestWindowFeature(Window.FEATURE_NO_TITLE); getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN); glView = new GLSurfaceView(this); glView.setRenderer(this); //setContentView(glView); glGraphics = new GLGraphics(glView); fileIO = new AndroidFileIO(getAssets()); audio = new AndroidAudio(this); input = new AndroidInput(this, glView, 1, 1); PowerManager powerManager = (PowerManager) getSystemService(Context.POWER_SERVICE); wakeLock = powerManager.newWakeLock(PowerManager.FULL_WAKE_LOCK, "GLGame"); } My Manifest file looks like this .... <activity android:name="com.google.ads.AdActivity" android:configChanges="keyboard|keyboardHidden|orientation|smallestScreenSize"/> </application> <uses-permission android:name="android.permission.WAKE_LOCK" /> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/> <uses-sdk android:minSdkVersion="7" /> When I first decided to use the XML for admob purpose ..it showed no changes..it even didn't log the device id in Logcat... Later when I wrote code in the Main Activity class.. and run ... Application crashed ... with 7 errors evry time ... The android:configChanges value of the com.google.ads.AdActivity must include screenLayout. The android:configChanges value of the com.google.ads.AdActivity must include uiMode. The android:configChanges value of the com.google.ads.AdActivity must include screenSize. The android:configChanges value of the com.google.ads.AdActivity must include smallestScreenSize. You must have AdActivity declared in AndroidManifest.xml with configChanges. You must have INTERNET and ACCESS_NETWORK_STATE permissions in AndroidManifest.xml. Please help me by telling what wrong is there with the code? Can I write code only in xml files without changing the Activity class ... I will be very grateful to anyone providing support.

  Read the article

• 30 Steps to Master ASP.NET MVC Application development

  - by Rajesh Pillai

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Welcome Readers!,   I am starting out a new series on ASP.NET  MVC skill building which will be posted over the next couple of weeks.  Let me know your thoughts on the content, which I have planned and a couple of them has been taken from ASP.NET MVC2 Cookbook. (NOTE: Only the heading has been taken, the content will be not :)).   Do let me know what you would like to see, or any additional inputs or ideas to cover in this topics.  The 30 steps are oultined below for quick reference.  Will start filling this out quickly.   Outlined is the ‘30’ step to master ASP.NET MVC.   A Peek Into Model What is a model? Different types of model Presentation/ViewModel Model Mapping (AutoMapper)   A Peak into View How view works in ASP.NET MVC? View Engine Design Custom View Engine View Best Practices Templated Helpers Partial Views   A Peak into Controller Introduction Controller Design Controller Best Practices Asynchronous Controller Custom Action Result Action Filters Controller Factory to use with IOC   Routes Explanation Routes from the database Routes from XML More complex routing   Master Pages Basics Setting Master Page Dynamically   Working with data in the view Repeating Views Array of check boxes Array of radio buttons Paged data CRUD Client side action Confirmation Dialog (modal window) jqGrid   Working with Forms   Validation Model Validation with DataAnnotations Using the xVal validation framework Client side validation with jQuery Validation Fluent Validation Model Binders   Templating Create strongly typed helper using T4 Custom View Templates with T4 Create custom MVC project template using T4   IOC AutoFac Ninject Unity Application   Areas   jQuery, Ajax and jQuery Plugins   State Maintenance Application State User state Cookies Webfarm   Error Handling View error handling Controller error handling ELMAH (Error Logging Modules and Handlers)   Authentication and Authorization User Registration form SignOn Process Password Reminder Membership and Roles Windows authentication Restricting access to all pages Restricting access to selected pages Restricting access to pages by role Restricting access to a controller Restricting access to selected area   Profiles and Themes Using Profiles Inheriting a Profile Migrating an anonymous profile Creating custom themes Using themes User personalized themes   Configuration Adding custom application settings in web.config Displaying custom error messages Accessing other web.config configuration elements Adding custom configuration elements to web.config Encrypting web.config sections   Tracing, Debugging and Logging   Caching Caching a whole page Caching pages based on route details Caching pages based on browser type and version Caching pages based custom strings Caching partial pages Caching application data Object Caching Using Microsoft Velocity Using MemCache Using AppFabric cache   Localization   HTTP Handlers and Modules   Security XSS/CSRF AnitForgery Encoding   HtmlHelpers Strongly typed helpers Writing custom helpers   Repository Pattern (Data access)   WF/WCF   Unit Testing   Mocking Framework   Integration Testing   Load / Performance Testing   Deployment    Once again let me know your thoughts on this.   Till then, Enjoy MVC'ing!!!

  Read the article

• SQL SERVER – Introduction to LEAD and LAG – Analytic Functions Introduced in SQL Server 2012

  - by pinaldave

  SQL Server 2012 introduces new analytical function LEAD() and LAG(). This functions accesses data from a subsequent row (for lead) and previous row (for lag) in the same result set without the use of a self-join . It will be very difficult to explain this in words so I will attempt small example to explain you this function. Instead of creating new table, I will be using AdventureWorks sample database as most of the developer uses that for experiment. Let us fun following query. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, LEAD(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ) LeadValue, LAG(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ) LagValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us following result. When we look at above resultset it is very clear that LEAD function gives us value which is going to come in next line and LAG function gives us value which was encountered in previous line. If we have to generate the same result without using this function we will have to use self join. In future blog post we will see the same. Let us explore this function a bit more. This function not only provide previous or next line but it can also access any line before or after using offset. Let us fun following query, where LEAD and LAG function accesses the row with offset of 2. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, LEAD(SalesOrderDetailID,2) OVER (ORDER BY SalesOrderDetailID ) LeadValue, LAG(SalesOrderDetailID,2) OVER (ORDER BY SalesOrderDetailID ) LagValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us following result. You can see the LEAD and LAG functions  now have interval of  rows when they are returning results. As there is interval of two rows the first two rows in LEAD function and last two rows in LAG function will return NULL value. You can easily replace this NULL Value with any other default value by passing third parameter in LEAD and LAG function. Let us fun following query. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, LEAD(SalesOrderDetailID,2,0) OVER (ORDER BY SalesOrderDetailID ) LeadValue, LAG(SalesOrderDetailID,2,0) OVER (ORDER BY SalesOrderDetailID ) LagValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us following result, where NULL are now replaced with value 0. Just like any other analytic function we can easily partition this function as well. Let us see the use of PARTITION BY in this clause. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, LEAD(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ) LeadValue, LAG(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ) LagValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us following result, where now the data is partitioned by SalesOrderID and LEAD and LAG functions are returning the appropriate result in that window. As now there are smaller partition in my query, you will see higher presence of NULL. In future blog post we will see how this functions are compared to SELF JOIN. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Welcome 2011

  - by WeigeltRo

  Things that happened in 2010 MIX10 was absolutely fantastic. Read my report of MIX10 to see why.   The dotnet Cologne 2010, the community conference organized by the .NET user group Köln and my own group Bonn-to-Code.Net became an even bigger success than I dared to dream of.   There was a huge discrepancy between the efforts by Microsoft to support .NET user groups to organize public live streaming events of the PDC keynote (the dotnet Cologne team joined forces with netug  Niederrhein to organize the PDCologne) and the actual content of the keynote. The reaction of the audience at our event was “meh” and even worse I seriously doubt we’ll ever get that number of people to such an event (which on top of that suffered from technical difficulties beyond our control).   What definitely would have deserved the public live streaming event treatment was the Silverlight Firestarter (aka “Silverlight Damage Control”) event. And maybe we would have thought about organizing something if it weren’t for the “burned earth” left by the PDC keynote. Anyway, the stuff shown at the firestarter keynote was the topic of conversations among colleagues days later (“did you see that? oh yeah, that was seriously cool”). Things that I have learned/observed/noticed in 2010 In the long run, there’s a huge difference between “It works pretty well” and “it just works and I never have to think about it”. I had to get rid of my USB graphics adapter powering the third monitor (read about it in this blog post). Various small issues (desktop icons sometimes moving their positions after a reboot for no apparent reasons, at least one game I couldn’t get run at all, all three monitors sometimes simply refusing to wake up after standby) finally made me buy a PCIe 1x graphics adapter. If you’re interested: The combination of a NVIDIA GTX 460 and a GT 220 is running in “don’t make me think” mode for a couple of months now.   PowerPoint 2010 is a seriously cool piece of software. Not only the new hardware-accelerated effects, but also features like built-in background removal and picture processing (which in many cases are simply “good enough” and save a lot of time) or the smart guides.   Outlook 2010 crashes on me a lot. I haven’t been successful in reproducing these crashes, they just happen when every couple of days on different occasions (only thing in common: I clicked something in the main window – yeah, very helpful observation)   Visual Studio 2010 reminds me of Visual Studio 2005 before SP1, which is actually not a good thing to say about a piece of software. I think it’s telling that Microsoft’s message regarding the beta of SP1 has been different from earlier service pack betas (promising an upgrade path for a beta to the RTM sounds to me like “please, please use it NOW!”).   I have a love/hate relationship with ReSharper. I don’t want to develop without it, but at the same time I can’t fail to notice that ReSharper is taking a heavy toll in terms of performance and sometimes stability. Things I’m looking forward to in 2011 Obviously, the dotnet Cologne 2011. We already have been able to score some big name sponsors (Microsoft, Intel), but we’re still looking for more sponsors. And be assured that we’ll make sure that our partners get the most out of their contribution, regardless of how big or small.   MIX11, period.    Silverlight 5 is going to be great. The only thing I’m a bit nervous about is that I still haven’t read anything official on whether C# next version’s async/await will be in it. Leaving that out would be really stupid considering the end-of-2011 release of SL5 (moving the next release way into the future).

  Read the article

• Lies, damned lies, and statistics Part 2

  - by Maria Colgan

  There was huge interest in our OOW session last year on Managing Optimizer Statistics. It seems statistics and the maintenance of them continues to baffle people. In order to help dispel the mysteries surround statistics management we have created a two part white paper series on Optimizer statistics.  Part one of this series was released in November last years and describes in detail, with worked examples, the different concepts of Optimizer statistics. Today we have published part two of the series, which focuses on the best practices for gathering statistics, and examines specific use cases including, the fears that surround histograms and statistics management of volatile tables like Global Temporary Tables. Here is a quick look at the Introduction and the start of the paper. You can find the full paper here. Happy Reading! Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman","serif";} Introduction The Oracle Optimizer examines all of the possible plans for a SQL statement and picks the one with the lowest cost, where cost represents the estimated resource usage for a given plan. In order for the Optimizer to accurately determine the cost for an execution plan it must have information about all of the objects (table and indexes) accessed in the SQL statement as well as information about the system on which the SQL statement will be run. This necessary information is commonly referred to as Optimizer statistics. Understanding and managing Optimizer statistics is key to optimal SQL execution. Knowing when and how to gather statistics in a timely manner is critical to maintaining acceptable performance. This whitepaper is the second of a two part series on Optimizer statistics. The first part of this series, Understanding Optimizer Statistics, focuses on the concepts of statistics and will be referenced several times in this paper as a source of additional information. This paper will discuss in detail, when and how to gather statistics for the most common scenarios seen in an Oracle Database. The topics are · How to gather statistics · When to gather statistics · Improving the efficiency of gathering statistics · When not to gather statistics · Gathering other types of statistics How to gather statistics The preferred method for gathering statistics in Oracle is to use the supplied automatic statistics-gathering job. Automatic statistics gathering job The job collects statistics for all database objects, which are missing statistics or have stale statistics by running an Oracle AutoTask task during a predefined maintenance window. Oracle internally prioritizes the database objects that require statistics, so that those objects, which most need updated statistics, are processed first. The automatic statistics-gathering job uses the DBMS_STATS.GATHER_DATABASE_STATS_JOB_PROC procedure, which uses the same default parameter values as the other DBMS_STATS.GATHER_*_STATS procedures. The defaults are sufficient in most cases. However, it is occasionally necessary to change the default value of one of the statistics gathering parameters, which can be accomplished by using the DBMS_STATS.SET_*_PREF procedures. Parameter values should be changed at the smallest scope possible, ideally on a per-object bases. You can find the full paper here. Happy Reading! +Maria Colgan

  Read the article

• Create Panoramic Photos with Windows Live Photo Gallery

  - by Matthew Guay

  Have you ever wanted to capture the view from a mountain or the full size of a building?  Here’s how you can stitch multiple shots together into the perfect panoramic picture for free with Windows Live Photo Gallery. Getting Started First, make sure you have Windows Live Photo Gallery installed (link below).  Live Photo Gallery is part of the Windows Live Essentials suite, you can select other programs to install along with it if you want. Make sure to uncheck setting your home page to MSN and setting your search provider as Bing if you don’t want them changed.   Now, make sure you have pictures that will work good for a panorama.  These need to be taken from the same spot, and the edges of the pictures need to overlap so the program can find where the pictures connect.  Here we have taken pictures inside a building with a cell phone camera. Make your Panorama Open Live Photo Gallery, and find the pictures you want to use in your panorama.  It will automatically index and display all of the photos in your Pictures folder or Library if you’re using Windows 7. If your pictures are saved elsewhere, add that folder to Photo Gallery.  Click File, Include a folder in the gallery, and select the correct folder at the prompt. Now select all of the pictures that you will use in your panorama.  You can easily do this by clicking the checkbox on each picture that appears when you hover over it.    Once all of the pictures are selected, click Make in the menu bar and select Create panoramic photo… Alternately, right-click on any of the pictures you’ve selected, and click Create panoramic photo… Live Photo Gallery will analyze your photos and compost them together to create a panorama.  The amount of time it takes will vary depending on the number of photos, size of the pictures, and computer speed. When it’s finished making the panorama, you’ll be prompted to enter a file name and save the picture. Your new panorama picture will open as soon as it’s saved.  Depending on your shots, the picture may have quite a bit of black space around the edges where each picture didn’t cover the exact same amount of area. To correct this, click Fix on the menu bar, and then select Crop Photo in the sidebar that opens. Select the center of the picture with the crop tool, and click Apply when you’ve got the selection you want. Live Photo Gallery automatically saves your picture changes, and you can revert back to the original picture if you wish. Now you’ve got a nice panoramic shot, trimmed and ready to print, share, and more. Conclusion Panoramic shots are great ways to capture your whole surroundings, whether it’s a sports stadium, mall, or a scenic mountain view.  They can also be a great way to capture more with low-resolution cameras. Link Download Windows Live Photo Gallery Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesLearning Windows 7: Manage Photos with Live Photo GalleryEasily Re-Size Photos in Windows Vista or XPInstall Windows Live Essentials In Windows 7Convert Photos to Flash for Your Website TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• SQL SERVER – Read Only Files and SQL Server Management Studio (SSMS)

  - by pinaldave

  Just like any other Developer or DBA SQL Server Management Studio is my favorite application. Any any moment of the time I have multiple instances of the same application are open and I am working on it. Recently, I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. First create a read only SQL file. You can make any file read by Right Click >> Properties >> Select Attribute Read Only. Now open the same file in SQL Server Management Studio. You will find that besides the file name there is a small ‘lock’ icon. This small icon indicates that the file is read only. Now let us attempt to edit the read only file. It will let us edit the file any way we want, however when we attempt to save it, it gives following pop-up value. The options in the pop-up are self explanatory and I liked it. The goal of the read only file is to prevent users to make un-intended changes. However, when a user should have complete control over the user file. User should be aware that the file is read only but if he wants to edit the file or save as a new file the choices should be present in front of it and the pop-up menu precisely captures the same. Now let us check option related to this feature in SSMS. Go to Menu >> Options >> Environment >> Documents You will find the third option which is “Allow editing of read-only files; warn when attempt to save”. In the above scenario it was already checked. Let us uncheck the same and do the same exercise which we have done earlier. I closed all the earlier window to avoid confusion. With the new option selected when I attempt to even modify the Read Only file, it gives me totally different pop up screen. It gives me an option like “Edit In-Memory”, “Make Writeable” etc. When you select “Edit In-Memory” it allows you to edit the file and later you can save as new file – just like the earlier scenario which we have discussed. . If clicked on the Make Writeable it will remove the restriction of the Read Only and file can be edited as pleased. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• All libGDX input statements are returning TRUE at once

  - by MowDownJoe

  I'm fooling around with Box2D and libGDX and running into a peculiar problem with polling for input. Here's the code for the Screen's render() loop: @Override public void render(float delta) { Gdx.gl20.glClearColor(0, 0, .2f, 1); Gdx.gl20.glClear(GL20.GL_COLOR_BUFFER_BIT); camera.update(); game.batch.setProjectionMatrix(camera.combined); debugRenderer.render(world, camera.combined); if(Gdx.input.isButtonPressed(Keys.LEFT)){ Gdx.app.log("Input", "Left is being pressed."); pushyThingyBody.applyForceToCenter(-10f, 0); } if(Gdx.input.isButtonPressed(Keys.RIGHT)){ Gdx.app.log("Input", "Right is being pressed."); pushyThingyBody.applyForceToCenter(10f, 0); } world.step((1f/45f), 6, 2); } And the constructor is largely just setting up the World, Box2DDebugRenderer, and all the Bodies in the world: public SandBox(PhysicsSandboxGame game) { this.game = game; camera = new OrthographicCamera(800, 480); camera.setToOrtho(false); world = new World(new Vector2(0, -9.8f), true); debugRenderer = new Box2DDebugRenderer(); BodyDef bodyDef = new BodyDef(); bodyDef.type = BodyType.DynamicBody; bodyDef.position.set(100, 300); body = world.createBody(bodyDef); CircleShape circle = new CircleShape(); circle.setRadius(6f); FixtureDef fixtureDef = new FixtureDef(); fixtureDef.shape = circle; fixtureDef.density = .5f; fixtureDef.friction = .4f; fixtureDef.restitution = .6f; fixture = body.createFixture(fixtureDef); circle.dispose(); BodyDef groundBodyDef = new BodyDef(); groundBodyDef.position.set(new Vector2(0, 10)); groundBody = world.createBody(groundBodyDef); PolygonShape groundBox = new PolygonShape(); groundBox.setAsBox(camera.viewportWidth, 10f); groundBody.createFixture(groundBox, 0f); groundBox.dispose(); BodyDef pushyThingyBodyDef = new BodyDef(); pushyThingyBodyDef.type = BodyType.DynamicBody; pushyThingyBodyDef.position.set(new Vector2(400, 30)); pushyThingyBody = world.createBody(pushyThingyBodyDef); PolygonShape pushyThingyShape = new PolygonShape(); pushyThingyShape.setAsBox(40f, 10f); FixtureDef pushyThingyFixtureDef = new FixtureDef(); pushyThingyFixtureDef.shape = pushyThingyShape; pushyThingyFixtureDef.density = .4f; pushyThingyFixtureDef.friction = .1f; pushyThingyFixtureDef.restitution = .5f; pushyFixture = pushyThingyBody.createFixture(pushyThingyFixtureDef); pushyThingyShape.dispose(); } Testing this on the desktop. Basically, whenever I hit the appropriate keys, neither of the if statements in the loop return true. However, when I click in the window, both statements return true, resulting in a 0 net force on the body. Why is this?

  Read the article

• Beginner Geek: Scan Files for Viruses Before Using Them

  - by Mysticgeek

  To help avoid getting your computer infected by malicious software, it’s a good idea to scan files before executing them. Today we take a look at a couple of options that will let you scan files easily from your desktop. Scan File with Your Antivirus Software Most Antivirus software will put an option in the context menu so you can scan individual files. After downloading a file or email attachment, simply right-click the file and select the option to scan with your Antivirus software. If you want to scan more than one at a time, hold down the Ctrl key while you clicking each file you want to scan. Then right-click and select to scan with your Antivirus software. Here is our favorite Antivirus app, Microsoft Security Essentials scanning a couple of files. If a virus is found, your Antivirus app will delete it or put it in Quarantine so it cannot infect your system. Using VirusTotal Uploader To be very thorough and want a second opinion (actually 41), then you might want to check out the VirusTotal Uploader. This handy app will scan your files with 41 different Antivirus apps online. After installing VirusTotal Uploader, right-click the file, go to Send To, then VirusTotal. Alternately you can launch VirusTotal Uploader and Get and upload the file. It will send the file to VirusTotal.com and scan it with 41 different Antivirus apps and show you the results.   If you don’t want to install the Uploader, you can go to the VirusTotal site and upload a file from there to scan. We’ve noticed that occasionally there will be a false positive detected on files we know are clean. Sometimes the definition database of an Anti-malware app isn’t current, or an obscure Antivirus App will find something questionable. If that is the case, use your best judgment when viewing the results. Conclusion Most Antivirus apps today have real-time scanning and should be able to detect possible infections before you’re able to execute them. However, if they don’t or when in doubt, following these tips can save you a lot of headaches in the long run. If you use a lot of different flash drives throughout the day, check out our article on how to scan a thumb drive for viruses from the AutoPlay Dialog. Download Microsoft Security Essentials Download VirusTotal Uploader VirusTotal Website Similar Articles Productive Geek Tips Scan Files for Viruses Before You Download With Dr.WebMake Microsoft Security Essentials Scan Faster by Excluding Certain File TypesBeginner Geek: Delete User Accounts in Windows 7Scan Your Thumb Drive for Viruses from the AutoPlay DialogSecure Computing: Free Anti-Virus Protection With AVG Free Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

  Read the article

• Stay on Schedule in Chrome with DayHiker

  - by Matthew Guay

  Do you keep your schedule and tasks in Google Calendar?  Here’s a handy extension for Google Chrome that can keep you on top of your appointments without having to open Google Calendar in another tab. Integrate Google Calendar with Chrome DayHiker is a handy extension for Google Chrome that can help you stay on schedule in your browser.  Desktop applications typically can keep you notified easier with popups or alerts, but webapps require you to visit them to view your information.  DayHiker takes the best of both, and can make your Google Calendar work more like a desktop application. To get started, open the DayHiker page from the Chrome Extensions Gallery (link below), and click Install.  Confirm you wish to install it at the prompt. Now you’ll have a new extension button in your Chrome toolbar.  Click the calendar icon to view your Google Calendar.  You’ll need to be signed into your Google account for your calendar to display; click the key icon to select your account if it doesn’t show your appointments automatically. If you’re signed into multiple Google accounts, such as your public Gmail and a Google Apps account, you can select the calendar you wish and click Continue. Now you can quickly see your upcoming appointments.  Simply hover over the icon to see your upcoming events.  Or, just glance at it to see if there are any appointments coming up, as the indicator icon will change colors to show how long you have until your next appointment. Click the icon to see more information about your appointments. Or, click the Add link to add a new appointment.  If you need to edit the appointment details, click Edit Details and the appointment will open in Google Calendar for you to edit. You can also view and manage your tasks in Google Calendar.  Click the checkmark icon, and then add or check-off tasks directly from the extension pane. You can also set an alarm clock in DayHiker.  Click the green circle icon, and then enter the time for the alarm to go off.  Strangely it will only chime if the extension pane is left open, so if you click anywhere else in the browser or even switch to another program it will not chime.   If you’d like to customize DayHiker’s settings, right-click on it and select Options, or select Options in the Chrome Extensions page.  Here you can customize your badges and the DayHiker icon, or enter a custom domain for your Google Apps Pro calendar.   Conclusion If you rely on Google Calendar to stay on top of your schedule, DayHiker can help you stay scheduled and know what’s coming up.  We wish DayHiker supported multiple calendars so we could combine our Google Apps calendars with our personal Google Calendar, but even still, it is a very useful tool.  Whether you’re a tightly scheduled person or just like to jot down to-dos and keep track of them, this extension will help you do this efficiently with familiar Google tools. Link Download DayHiker from the Chrome Extensions Gallery Similar Articles Productive Geek Tips Configure Disk Defragmenter Schedule in Windows 7 or VistaSchedule Updates for Windows Media CenterOpen Multiple Sites Without Reopening the Menus in FirefoxFind a Website’s Actual Location with Chrome FlagsSubscribe to RSS Feeds in Chrome with a Single Click TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good

  Read the article

• Knowledge Management Feedback

  - by Robert Schweighardt

  Did you know that you can provide feedback on Knowledge Management (KM) articles? It's nice to read a technical article that is well-written, the grammar and spelling are correct, the information is up to date, concise, to the point, easy to understand and it flows from one paragraph to another.  And though we always strive for a well-written article, it doesn't always come out that way. Knowledge Management articles are written by Oracle Support Engineers and we welcome your feedback.  Providing feedback helps to improve Oracle's Knowledge Base.  If you're reading a KM article and you have a comment, please let us know about it.  Maybe it's just to fix a spelling or grammatical error.  Maybe there's a broken link that needs to be fixed.  Maybe it's a suggestion to provide additional information.  Maybe the article contains incorrect information.  Maybe some information in the article is outdated.  Maybe something is not clear in the article.  Whatever it is, we want to hear about it.  We value your input! When you provide feedback it goes directly to the owner of the article.  The owner carefully reviews the comment and decides whether or not to implement it.  Most comments are implemented and we strive to implement them within a week!  For those comments that are not implemented, there is normally a good reason.  It may not be feasible to implement the suggestion or the suggestion may not be correct.  We don't take the decision lightly! So how do you provide feedback? Providing feedback on a KM article depends on whether you're a customer or an Oracle Employee. Customer 1. In the upper right hand corner of the article, click on the little +/- Rate this document icon: Note: The grayed out Comments (0) link will only show a number when there are open comments that are still being evaluated. 2. In the Article Rating window, complete as many of the following optional fields as you like and then click the Send Rating button: Rate the article as Excellent, Good or Poor Specify whether the article helped you or not Specify the ease of finding the article Provide whatever comments you have Employee The interface for Oracle Employees is a little bit different, there are more options. 1. The +/- Rate this document icon is also available to employees and is identical to what the customers have.  Please see Customer section above. 2. The Show document comments link shows all comments that have ever been submitted for the article 3. Employees have an additional way to submit a comment.  Click on the little + Add Comment icon: 4. Fill out the Add Comment fields and click the Add Comment button: We look forward to your feedback!

  Read the article

• Introducing MySQL for Excel

  - by Javier Treviño

  As part of the new product initiatives of the MySQL on Windows group we released a tool that makes the task of getting data in and out of a MySQL Database very friendly and intuitive, and we paired it with one of the preferred applications for data analysis and manipulation in Windows platforms, MS Excel. Welcome to MySQL for Excel, an add-in that is installed and accessed from within the MS Excel’s Data tab offering a wizard-like interface arranged in an elegant yet simple way to help users browse MySQL Schemas, Tables, Views and Procedures and perform data operations against them using MS Excel as the vehicle to drive the data in and out MySQL Databases. One of the coolest features we had in mind designing MySQL for Excel is simplicity. MS Excel is simple and easy to work with, thus liked by many Windows users because they don’t have to be software gurus to use it.  We applied the same principle by targeting MySQL for Excel to any kind of user, so if you are already familiarized with Excel’s interface you will find yourself working with MySQL data in no time. MySQL for Excel is shipped within the MySQL Installer as one of the tools in the suite; if prerequisites are already installed (.NET Framework 4.0, Visual Studio Tools for Office 4.0 and of course MS Office), installing the add-in involves a very few clicks and no further setup to use it. Being an Excel Add-In there is no executable file involved after the installation, running MS Excel and opening the add-in from its Data tab is all that is required. MySQL for Excel automatically integrates with MySQL Workbench (if installed) to share the same connections to MySQL Server installations, that way connections are defined just once in either product saving time.  Opening the Add-In brings the Welcome Panel at the right side of the Excel main window from which connections to MySQL Servers are shown grouped by Local VS Remote connections; then users can open any of those connections by double-clicking it and entering the password of the used account.  Additionally a user can create a connection by clicking on the New Connection action label or edit connections through MySQL Workbench (if installed) by clicking on the Manage Connections action label. Once a connection is opened, the Schema Selection panel is shown, at the top of it the selected connection (connection name, hostname/IP and username). Just below, a list of schemas is displayed where User Schemas are grouped first followed by System Schemas; users can double-click any selected schema to go to the next panel or select a schema and clicking the Next > button. Users can alternatively click on the < Back button to go back to the Welcome Panel to close the current connection and open a new one; also by clicking the Create New Schema action label they can create an empty new schema. Once a schema is opened the DB Object Selection panel is shown, this is actually the place where the fun stuff happens; from here users are able to perform actions against MySQL Tables, Views and Procedures. ">The actions available here are about importing data from a MySQL Table, View or Procedure to Excel, exporting Excel data to a new MySQL Table, appending Excel data to an existing MySQL Table or editing a MySQL Table’s data by using an Excel Worksheet as a user interface to update data in any row/column, insert new rows or delete existing rows in a very easy and friendly way. More blog posts will follow describing all of these actions, so stay tuned! Remember that your feedback is very important for us, so drop us a message: · MySQL on Windows (this) Blog - https://blogs.oracle.com/MySqlOnWindows/ · Forum - http://forums.mysql.com/list.php?172 · Facebook - http://www.facebook.com/mysql Cheers!

  Read the article

• Bash completion doesn't work, or is ignoring what I've typed; but works for commands

  - by Neil Traft

  Bash completion seems to be ignoring what I've typed (it tries to complete, but acts as if there's nothing under the cursor). I know I saw it work on this machine earlier today, but I'm not sure what has changed. Some examples: cd shows all directories under my current folder: $ cd co<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ Commands like ls and less show all files and directories under my current folder: $ ls co<tab><tab> cmake/ config/ .cproject Doxyfile.in include/ programs/ README.txt src/ tests/ CMakeLists.txt COPYING.txt doc/ examples/ mainpage.dox .project sandbox/ .svn/ Even when I try to complete things from a different folder, it gives me only the results for my current folder (telling me that it is completely ignoring what I've typed): $ cd ~/D<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ But it seems to be working fine for commands and variables: $ if<tab><tab> if ifconfig ifdown ifnames ifquery ifup $ echo $P<tab><tab> $PATH $PIPESTATUS $PPID $PS1 $PS2 $PS4 $PWD $PYTHONPATH I do have this bit in my .bashrc, and I have confirmed that my .bashrc is indeed getting sourced: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I've even tried manually executing that file, but it doesn't fix the problem: $ . /etc/bash_completion There was even one point in time where it was working for ls, but was not working for cd ... but I can't replicate that result now. Update: I also just discovered that I have terminals open from earlier that still work. I ran source .bashrc in one of them and afterwards completion was broken. Here is my .bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # # Modified by Neil Traft #source ~/.profile # Allow globs to expand hidden files shopt -s dotglob nullglob # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines or lines starting with space in the history. # See bash(1) for more options HISTCONTROL=ignoreboth # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # If set, the pattern "**" used in a pathname expansion context will # match all files and zero or more directories and subdirectories. #shopt -s globstar # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # Color the prompt export PS1="\[$(tput setaf 2)\]\u@\h:\[$(tput setaf 5)\]\W\[$(tput setaf 2)\] $\[$(tput sgr0)\] " # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi

  Read the article

• Java, two JPanel on JFrame - Settings JPanel, StartMenu JPanel [on hold]

  - by Andy Tyurin

  There is my first question and I welcome community! I'm making a simple game and have some problems with Start menu. I have three buttons on my JPanel StartMenu and when I click "Settings" button, new JPanel will be open, but I don't know why buttons from StartMenu JPanel appeared in my Settings JPanel. My "Settings" JPanel has one ugly button "Back" in center and ugly grey background. I made some screens to see a problem. Start Menu JPanel when game launched Settings JPanel when button clicked Settings JPanel when mouse was over settings window There is code of StartMenu class: public class StartMenu extends JPanel { private GameButton startGameButton = new GameButton("Start game"); private GameButton settingsGameButton = new GameButton("Settings"); private GameButton exitGameButton = new GameButton("Exit game"); private Image bgImage = new ImageIcon(getClass().getClassLoader().getResource("ru/andydevs/astraLaserForce/bg.png")).getImage(); private int posX; private int posY; final private int WIDTH=(int)Game.SCREEN_DIMENSION.getWidth()/3; final private int HEIGHT=(int)Game.SCREEN_DIMENSION.getHeight()/2; public StartMenu() { setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); setSize(new Dimension(WIDTH, HEIGHT)); posX=(int)Game.SCREEN_DIMENSION.getWidth()/2-WIDTH/2; posY=(int)Game.SCREEN_DIMENSION.getHeight()/2-HEIGHT/2; setBounds(posX, posY,WIDTH,HEIGHT); c.ipadx=95; c.ipady=15; c.fill = GridBagConstraints.HORIZONTAL; c.insets = new Insets(20,0,0,0); c.gridy=0; add(startGameButton, c); c.gridy=1; c.insets = new Insets(20,0,0,0); System.out.println(settingsGameButton.getWidth()); add(settingsGameButton, c); c.gridy=2; c.insets = new Insets(20,0,0,0); add(exitGameButton, c); settingsGameButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { GameOptionsPanel gop = new GameOptionsPanel(); Game.container.add(gop); Game.container.setComponentZOrder(gop, 0); Game.container.revalidate(); Game.container.repaint(); } }); exitGameButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { Main.currentGame.stop(); } }); } public void paintComponent(Graphics g) { g.drawImage(bgImage,0,0,WIDTH,HEIGHT,null); } } There is code of Settings JPanel public class GameOptionsPanel extends GamePanel { private GameButton backButton = new GameButton("Back"); private GameOptionsPanel that; public GameOptionsPanel() { super((int) (Game.SCREEN_DIMENSION.getWidth()/3), (int) (Game.SCREEN_DIMENSION.getHeight()/2), new Color(50,50,50)); that=this; setLayout(new GridBagLayout()); GridBagConstraints gbc = new GridBagConstraints(); gbc.fill=gbc.HORIZONTAL; add(backButton); backButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { Game.container.remove(that); Game.container.revalidate(); Game.container.repaint(); } }); } } I glad to see some suggestions. Thanks.

  Read the article

• Java Hint in NetBeans for Identifying JOptionPanes

  - by Geertjan

  I tend to have "JOptionPane.showMessageDialogs" scattered through my code, for debugging purposes. Now I have a way to identify all of them and remove them one by one, since some of them are there for users of the application so shouldn't be removed, via the Refactoring window: Identifying instances of code that I'm interested in is really trivial: import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint( displayName = "#DN_ShowMessageDialogChecker", description = "#DESC_ShowMessageDialogChecker", category = "general") @Messages({ "DN_ShowMessageDialogChecker=Found \"ShowMessageDialog\"", "DESC_ShowMessageDialogChecker=Checks for JOptionPane.showMes" }) public class ShowMessageDialogChecker { @TriggerPattern(value = "$1.showMessageDialog", constraints = @ConstraintVariableType(variable = "$1", type = "javax.swing.JOptionPane")) @Messages("ERR_ShowMessageDialogChecker=Are you sure you need this statement?") public static ErrorDescription computeWarning(HintContext ctx) { return ErrorDescriptionFactory.forName( ctx, ctx.getPath(), Bundle.ERR_ShowMessageDialogChecker()); } } Stick the above class, which seriously isn't much code at all, in a module and run it, with this result: Bit trickier to do the fix, i.e., add a bit of code to let the user remove the statement, but I looked in the NetBeans sources and used the System.out fix, which does the same thing:  import com.sun.source.tree.BlockTree; import com.sun.source.tree.StatementTree; import com.sun.source.util.TreePath; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import org.netbeans.api.java.source.CompilationInfo; import org.netbeans.api.java.source.WorkingCopy; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.Fix; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.JavaFix; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint( displayName = "#DN_ShowMessageDialogChecker", description = "#DESC_ShowMessageDialogChecker", category = "general") @Messages({ "DN_ShowMessageDialogChecker=Found \"ShowMessageDialog\"", "DESC_ShowMessageDialogChecker=Checks for JOptionPane.showMes" }) public class ShowMessageDialogChecker { @TriggerPattern(value = "$1.showMessageDialog", constraints = @ConstraintVariableType(variable = "$1", type = "javax.swing.JOptionPane")) @Messages("ERR_ShowMessageDialogChecker=Are you sure you need this statement?") public static ErrorDescription computeWarning(HintContext ctx) { Fix fix = new FixImpl(ctx.getInfo(), ctx.getPath()).toEditorFix(); return ErrorDescriptionFactory.forName( ctx, ctx.getPath(), Bundle.ERR_ShowMessageDialogChecker(), fix); } private static final class FixImpl extends JavaFix { public FixImpl(CompilationInfo info, TreePath tp) { super(info, tp); } @Override @Messages("FIX_ShowMessageDialogChecker=Remove the statement") protected String getText() { return Bundle.FIX_ShowMessageDialogChecker(); } @Override protected void performRewrite(TransformationContext tc) throws Exception { WorkingCopy wc = tc.getWorkingCopy(); TreePath statementPath = tc.getPath(); TreePath blockPath = tc.getPath().getParentPath(); while (!(blockPath.getLeaf() instanceof BlockTree)) { statementPath = blockPath; blockPath = blockPath.getParentPath(); if (blockPath == null) { return; } } BlockTree blockTree = (BlockTree) blockPath.getLeaf(); List<? extends StatementTree> statements = blockTree.getStatements(); List<StatementTree> newStatements = new ArrayList<StatementTree>(); for (Iterator<? extends StatementTree> it = statements.iterator(); it.hasNext();) { StatementTree statement = it.next(); if (statement != statementPath.getLeaf()) { newStatements.add(statement); } } BlockTree newBlockTree = wc.getTreeMaker().Block(newStatements, blockTree.isStatic()); wc.rewrite(blockTree, newBlockTree); } } } Aside from now being able to use "Inspect & Refactor" to identify and fix all instances of JOptionPane.showMessageDialog at the same time, you can also do the fixes per instance within the editor:

  Read the article

• Desktop login fails, terminal works

  - by Tobias

  I have a freshly setup 12.04 LTS pc system (120 GB SSD, 1 TB HDD, 16 GiB RAM); since a few days, I can't login to the graphical desktop anymore: there is very short flashing shell window which disappears very quickly, and I'm confronted with the login screen again. I believe there is something about modprobe and vbox, but I can't read it fast enough ... I can login to a terminal (Ctrl+Alt+F1). It did not help to chown all contents of my home directory to me:my-group, like suggested here. This is what I could find in /var/log, grepping for the date and time (I inserted linebreaks after <my-hostname>; real time values preserved): auth.log: <date> 22:43:01 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user lightdm <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user tobias by (uid=0) <date> 22:43:08 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user tobias <date> 22:43:09 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) <date> 22:43:09 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:10 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:10 <my-hostname> dbus[756]: [system] Rejected send message, 2 matched rules; type="method_call", sender="1:43" (uid=104 pid=1639 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1005 comm="/usr/sbin/console-kit-daemon --no-daemon ") kern.log: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present syslog: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present <date> 22:43:01 <my-hostname> ntpdate[1492]: adjust time server 91.189.94.4 offset -0.162831 sec <date> 22:43:08 <my-hostname> acpid: client 969[0:0] has disconnected <date> 22:43:08 <my-hostname> acpid: client connected from 1553[0:0] <date> 22:43:08 <my-hostname> acpid: 1 client rule loaded I have Virtualbox and Truecrypt installed, but I can't think of a reason why they might prevent a graphical login. I'm confused: What is this about requirement "user ingroup nopasswdlogin" not met? I do login using a password, and the password works ok when logging in to a terminal! Can I somehow read the error output, e.g. by delaying it, redirecting it to a file, or having the system prompt me for pressing a key? Has possibly any recent update caused my problem? Should I install the pending updates? How, btw, without access to the graphical UI? I have some working knowledge about the Linux shell, but I'm new to Ubuntu. Any help would be appreciated.

  Read the article

• Convert .3GP and .3G2 Files to AVI / MPEG for Free

  - by DigitalGeekery

  3GP and .3G2 are common video capture formats used on many mobile phones, but they may not be supported by your favorite media player. Today we’ll show you a quick and easy way to convert those files to AVI or MPG format with the free Windows application, Pazera Free 3GP to AVI Converter. Download the Pazera Free 3GP to AVI Converter. You’ll have to unzip the download folder, but there is no need to install the application. Just double-click the 3gptoavi.exe file to run the application. To add your 3GP or 3G2 files to the queue to be converted, click on the Add files  button at the top left. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time.   Most users will find it preferable to use one of the pre-configured profiles for their conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You will see the profile update the settings in the panels at the bottom of the application. We tested Pazera Free 3GP to AVI Converter with 3GP files recorded on a Motorola Droid, and found the AVI H.264 Very High Q. profile to return the best results for AVI output, and the MPG – DVD NTSC: MPEG-2 the best results for MPG output. Other profiles produced smaller file sizes, but at a cost of reduced quality video output.   More advanced users may tweak video and audio settings to their liking in the lower panels. Click on the AVI button under Output file format / Video settings to adjust settings AVI… Or the MPG button to adjust the settings for MPG output. By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. When you’ve chosen your settings, click Convert to begin the conversion process.   A conversion output box will open and display the progress. When finished, click Close. Now you’re ready to enjoy your video in your favorite media player. Pazera Free 3GP to AVI Converter isn’t the most robust media conversion tool, but it does what it is intended to do. It handles the task of 3GP to AVI / MPG conversion very well. It’s easy enough for the beginner to manage without much trouble, but also has enough options to please more experienced users. Download Pazera Free 3GP to AVI Converter Similar Articles Productive Geek Tips How To Convert Video Files to MP3 with VLCEasily Change Audio File Formats with XRECODEConvert PDF Files to Word Documents and Other FormatsConvert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1Compress Large Video Files with DivX / Xvid and AutoGK TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad

  Read the article

• Combine the Address & Search Bars in Firefox

  - by Asian Angel

  The Search Bar in Firefox is very useful for finding additional information or images while browsing but the UI space it takes up can be frustrating at times. Now you can reclaim that UI space and still have access to all that searching goodness with the Foobar extension. Note: This is about the Foobar Firefox extension and not to be confused with Foobar2000 the open source music player. Before If you have the “Search Bar” displayed there is no doubt that it is taking up valuable space in your browser’s UI. What you need is the ability to reclaim that UI space and still have the same access to your search capability as before…no more sacrificing one for a gain with the other. After As soon as you have installed the extension you can see that the top part of your browser will look much sleeker without the “Search Bar” to clutter it up. The “Search Engine Icon” will now be visible inside of your “Address Bar” as seen here. You will be able to access the same “Search Engine Menu” as before by clicking on the “Search Engine Icon”. There are two display modes for search results (setting available in the “Options”). The first one shown here is “Simple Mode” where all results are in a condensed format. Notice that not only are there search suggestions but also “Bookmarks & History” listings as well. You can literally get the best of both when conducting a search. Note: The number of entries for search suggestions and bookmark/history listings can be adjusted higher or lower in the “Options”. The second one is “Rich Mode” where the results are shown with more details. Choose the “mode” that best suits your personal style. For our first example you can see the results when we conducted a quick search on “Windows 7” (using the first of the three offerings shown from Bing). Our second example was a search for “Flowers” using our Photobucket search engine. Once again nice results opened in a new tab for us. Options The options are easy to go through. It is really nice to be able to choose the number of results that you want displayed and the format that you want them shown in. Note: Changing the “Suggestion popup style” will require a browser restart to take effect. Conclusion If you love using the “Search Bar” in Firefox but want to reclaim the UI space then you will definitely want to add this extension to your browser. The ability to customize the number of results and choose the formatting make this extension even better. Links Download the Foobar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Combine the Address Bar and Progress Bar Together in FirefoxHide Some or All of the GUI Bars in FirefoxEnable Partial Match AutoComplete in the Firefox Address BarQuick Firefox UI TweaksAdd Search Forms to the Firefox Search Bar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

  Read the article

• Access Music from Amie Street in Boxee

  - by Mysticgeek

  One of our favorite sites for discovering new music is Amie Street. Today we take a look at the Amie Street app for Boxee that allows you to access your favorite tunes from the Boxee interface. Amie Street is a cool site that allows you to discover a lot of cool music from independent artists. What makes Amie Street unique is that most of the music starts out free, then the price goes up incrementally as its popularity grows. The Amie Street App for Boxee let’s you access music and playlists you’ve created on the site, with more features are on the way. For this example we’re using the mouse and keyboard, but of course you can also get to each section using your remote if you have one. Or you can turn your iPod touch into a Boxee remote too. Amie Street in Boxee To access the Amie Street app, launch Boxee and click on Apps from the main menu. Under the Search Sidebar type in Amie Street and select it from the results field.   Then you can add it to the My Apps section…and double-click on the icon. Click on Start to begin using it. You’ll be be presented with a Welcome screen where you can sign into your account. If you don’t have an account yet, there is also an option to go to the Amie Street site and create one. Enter in your account credentials… Now you’ll be able to access your Library, Playlists, Search for new tunes, and check out your Recommended bands and artists. Hover the pointer over an album to get a bit more info about it such as the music genre. You’ll be able to play the songs from the playlists you created on the Amie Street site. You can browse through the history of the music you’ve played as well. Not all the features of this app seem to work as you’d expect them to, and some of the features are not yet available like the Browse feature.   Conclusion At the time of this writing we weren’t able to purchase music or get additional information about the artists. As development continues on Boxee and this app, you can expect more of a full user experience and the ability to purchase music. Even though some of the features are a bit buggy or not available, if you’re a Boxee user and a fan of Amie Street, this is cool app to add to your collection. Download Boxee for Windows, Mac, and Ubuntu Learn more about Amie Street on Boxee Similar Articles Productive Geek Tips Amie Street Downloader Makes Purchasing Music EasierFind Free or Cheap Indie Music at Amie StreetIntegrate Boxee with Media Center in Windows 7Using Pandora in BoxeeGetting Started with Boxee TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Watch World Cup Online On These Sites Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like)

  Read the article

• New JavaScript Editor

  - by Petr

  I did not write a blog post here for a few weeks. I think the last my post was  about releasing NetBeans 7.1 in the beginning of January. The reason is not that I would change the job:), but that I have concentrated on new JavaScript support/editor. The new JavaScript editor is written basically from scratch. The answer for the question "Why from beginning again, why do you just improve the old one?" is not easy and the decision has more aspects. One of the main reasons is that the old support was written 4 years ago and the architecture is limited. Also during the time, the APIs were changed and it was very hard to keep the editor up to date. Also there is a license issue etc. In short, it is time to rewrite the old JS editor.  We build up strong community about the PHP support in NetBeans and because many PHP developers also write JavaScript code I would like to ask you for a help. There is a continual PHP build with the new JavaScript support. You can download the result of the builds here. It's a zip file. You can unzip the file anywhere, where you want. I recommend to run the build with the new userdir, to avoid damaging your current userdir. It shouldn't happened, but just to be sure:). You can achieve this through the switch --userdir. So start the unzipped file from command line from the folder, where you unzipped it, can be done with this command on unix: bin/netbeans.sh --userdir /path/to/new/userdir and on windows: bin\netbeans.exe --userdir D:\path\to\new\userdir For the developers who use continual php build already, it's well known. There is also full IDE build with the new JavaScript support for people, who need more than only PHP support.  Because the builds with the new JavaScript editor is created from a branch, there are not nightly builds available. They will be, when we merge the branch to the trunk, but so far we have to work only with the mentioned continual build. We will merge our branch after branching NetBeans 7.2 from trunk. This is also answer for the question, what release of NetBeans will contain the new JS support. It should be the release after NetBeans 7.2. I'm asking you whether you could play with the builds or better, could work in the builds with new JavaScript support and tell us every issue that you run in. It can be everything what doesn't fit you, something doesn't work as you expected, something is slow, you want change the behaviour of a feature etc. Your input / comments are very important for us and it will help us to achieve the new JavaScript support that you need.  The best way how to communicate issues is through our Bugzilla, because it is simple to track them. Sure you can write comment here:), but still I prefer Bugzilla for any issue. You can click here (you should be already log in Bugzilla), a form for the new JavaScript issue is opened, with pre-filled component Editor and NO72 keyword. I will write about the single features later, but now I will mentioned a few features that should work in better way than in the old support.  Syntactic and semantic colouring Navigator Mark Occurrences and GoTo Declaration  Code Completion Code Completion is invoked through keyboard shortcut CTRL+SPACE. The first invocation offers items that are found through a source model. Almost all editor features are based on the model, that is build from source code. There is a lot of work on the model yet, but it should offer better results. When the pop up window with code completion items is open and you press CTRL+SPACE again, then the code completion offers all elements that are in the project. In the pictures all elements that starts with letter 't'. Formatter with many options and more :) A few features are not still implemented that are supported in the old JavaScript support (for example jQuery support), but we are adding this features ASAP.

  Read the article

• How to Add Your Gmail Account to Outlook 2013 Using IMAP

  - by Lori Kaufman

  If you use Outlook to check and manage your email, you can easily use it to check your Gmail account as well. You can setup your Gmail account to allow you to synchronize email across multiple machines using email clients instead of a browser. We will show you how to use IMAP in your Gmail account so you can synchronize your Gmail account across multiple machines, and then how to add your Gmail account to Outlook 2013. To setup your Gmail account to use IMAP, sign in to your Gmail account and go to Mail. Click the Settings button in the upper, right corner of the window and select Settings from the drop-down menu. On the Settings screen, click Forwarding and POP/IMAP. Scroll down to the IMAP Access section and select Enable IMAP. Click Save Changes at the bottom of the screen. Close your browser and open Outlook. To begin adding your Gmail account, click the File tab. On the Account Information screen, click Add Account. On the Add Account dialog box, you can choose the E-mail Account option which automatically sets up your Gmail account in Outlook. To do this enter your name, email address, and the password for your Gmail account twice. Click Next. The progress of the setup displays. The automatic process may or may not work. If the automatic process fails, select Manual setup or additional server types, instead of E-mail Account, and click Next. On the Choose Service screen, select POP or IMAP and click Next. On the POP and IMAP Account Settings enter the User, Server, and Logon Information. For the Server Information, select IMAP from the Account Type drop-down list and enter the following for the incoming and outgoing server information: Incoming mail server: imap.googlemail.com Outgoing mail server (SMTP): smtp.googlemail.com Make sure you enter your full email address for the User Name and select Remember password if you want Outlook to automatically log you in when checking email. Click More Settings. On the Internet E-mail Settings dialog box, click the Outgoing Server tab. Select the My outgoing server (SMTP) requires authentication and make sure the Use same settings as my incoming mail server option is selected. While still in the Internet E-mail Settings dialog box, click the Advanced tab. Enter the following information: Incoming server: 993 Incoming server encrypted connection: SSL Outgoing server encrypted connection TLS Outgoing server: 587 NOTE: You need to select the type of encrypted connection for the outgoing server before entering 587 for the Outgoing server (SMTP) port number. If you enter the port number first, the port number will revert back to port 25 when you change the type of encrypted connection. Click OK to accept your changes and close the Internet E-mail Settings dialog box. Click Next. Outlook tests the accounts settings by logging into the incoming mail server and sending a test email message. When the test is finished, click Close. You should see a screen saying “You’re all set!”. Click Finish. Your Gmail address displays in the account list on the left with any other email addresses you have added to Outlook. Click the Inbox to see what’s in your Inbox in your Gmail account. Because you’re using IMAP in your Gmail account and you used IMAP to add the account to Outlook, the messages and folders in Outlook reflect what’s in your Gmail account. Any changes you make to folders and any time you move email messages among folders in Outlook, the same changes are made in your Gmail account, as you will see when you log into your Gmail account in a browser. This works the other way as well. Any changes you make to the structure of your account (folders, etc.) in a browser will be reflected the next time you log into your Gmail account in Outlook.     

  Read the article

• Extract Audio from a Video File with Pazera Free Audio Extractor

  - by DigitalGeekery

  Have you ever wanted to extract some or all of the audio from a video file?  Today we’ll take a look at Pazera Free Audio Extractor. A simple audio converter that specializes in that very task. Download the Pazera Free Audio Extractor. (See download link below) You’ll need to unzip the download folder, but there is no need to install the application. Simply double-click the AudioExtractor.exe file to run the application. To add your video files to the queue to be converted, click on the Add files  button at the top left. You can add multiple files to the queue and convert them all at one time. Browse for your video file, and click Open.   Your video will be added to the Queue for processing.   Under Output directory you can choose to output to a folder of your choice. Outputting to the same folder as the input folder is the default.   Pazera Free Audio Extractor includes pre-configured profiles that will simplify the process of choosing conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You can choose to output to MP3, AAC, AC3, WMA, FLAC, OGG or WAV file format.   You will see the profile update the Audio settings in the panels at the lower left of the application. If you wish, you may also select your own custom settings. Advanced Settings The Advanced settings can be used if you want to extract only a portion of the the audio, such as a clip of dialog or a song from a movie. To extract only a portion of the audio, set the start time by selecting the Start time offset check box, then entering the time in the video clip where the audio begins. To set the end time, begin by selecting the Duration check box. Now, you can either select the Duration radio button and enter the amount of time for which you would like to extract the audio, or you can select the End time offset radio button and enter the time in the video clip where the audio ends. When you are ready to convert, click the CONVERT button on the menu at the top of the screen.   An output box will open and display the conversion progress. When finished, click Close.   Now you are ready to enjoy your audio clip. Pazera Free Audio Extractor is a basic audio tool that is easy enough for everyone to use. It runs on Windows only and supports most common video formats including AVI, FLV, MP4, MPG, MOV, 3GP, and WMV. Download Free Audio Extractor 1.3 Similar Articles Productive Geek Tips Eufony Free Audio Player – Resource Gentle Audio PlayerConvert .3GP and .3G2 Files to AVI / MPEG for FreeTurn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuHow to Make/Edit a movie with Windows Movie Maker in Windows VistaEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs

  Read the article

• CodePlex Daily Summary for Monday, February 14, 2011

  CodePlex Daily Summary for Monday, February 14, 2011Popular ReleasesBuild Version Increment Add-In Visual Studio: Build Version Increment v2.4.11045.2118: v2.4.11045.2118 Fixes and/or Improvements:Major: Added complete support for VC projects including .vcxproj & .vcproj. All padding issues fixed. A project's assembly versions are only changed if the project has been modified. Minor Order of versioning style values is now according to their respective positions in the attributes i.e. Major, Minor, Build, Revision. Fixed issue with global variable storage with some projects.Document.Editor: 2011.4: Whats new for Document.Editor 2011.4: New Subscript support New Superscript support New column display in statusbar Improved dialogs Minor Bug Fix's, improvements and speed upsCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.1: Coding4Fun.Phone.Toolkit v1.1 release. Bug fixes and minor feature requests addedTV4Home - The all-in-one TV solution!: 0.1.0.0 Preview: This is the beta preview release of the TV4Home software.Finestra Virtual Desktops: 1.2: Fixes a few minor issues with 1.1 including the broken per-desktop backgrounds Further improves the speed of switching desktops A few UI performance improvements Added donations linksOpenSyobon-M: 0.1: Changes to OpenSyobon rc2: -Replaced TTF fonts with bitmap fonts. -Ported to Mac OS X. -Fixed several graphic glitches. -Fixed Joystick support.NuGet: NuGet 1.1: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. The URL to the package OData feed is: http://go.microsoft.com/fwlink/?LinkID=206669 To see the list of issues fixed in this release, visit this our issues listEnhSim: EnhSim 2.4.0: 2.4.0This release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 - Upd...Sterling Isolated Storage Database with LINQ for Silverlight and Windows Phone 7: Sterling OODB v1.0: Note: use this changeset to download the source example that has been extended to show database generation, backup, and restore in the desktop example. Welcome to the Sterling 1.0 RTM. This version is not backwards-compatible with previous versions of Sterling. Sterling is also available via NuGet. This product has been used and tested in many applications and contains a full suite of unit tests. You can refer to the User's Guide for complete documentation, and use the unit tests as guide...PDF Rider: PDF Rider 0.5.1: Changes from the previous version * Use dynamic layout to better fit text in other languages * Includes French and Spanish localizations Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0.5.1-setup.exe" (reccomended) 2. Down...Snoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! p.s. By request, I am also attaching a .zip file ... so that people can install it ...SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)GMare: GMare Alpha 02: Alpha version 2. With fixes detailed in the issue tracker.Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...WCF Data Services Toolkit: WCF Data Services Toolkit: The source code and binary releases of the WCF Data Services Toolkit. For simplicity, the source code download doesn't include any of the MSTest files. If you want those, you can pull the code down via MercurialyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Video capturing improved Supports YouTube's new layout (january 2011) Internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details. Webdeploy package sha1 checksum: 28785b7248052465ea0738a7775e8e8744d84c27fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroNew ProjectsBrunoFigueiredo.com Code Samples: Code samples for the brunofigueiredo.com blog.CityLizard++: CityLizard++ is a set of general header-only C++ libraries.Cm - CSharp Based Mathematical Computation: CM is a C# based Mathematical language which makes it easier for scientist, engineers and students to do scientific computation. CM will provide a mechanism for “NO LOOP” programming which is much like MatLab or Fortran. It's developed in C#.DirectX Wrapper for Vortex2D: Satellite project for Vortex2D graphics framework/game engine. It contains thin DirectX API wrapper written in C++/CLI which is used by Vortex2D graphics/input modules.Dynamicweb Project Template for VS.NET: Dynamicweb Project Template for Visual Studio.NET is a project template that servces a collection of many common development issues you face when developing custom solutions on top of Dynamicweb CMS and Dynamicweb eCommerce.Flashcards - Sample App for SQLAzure, MVC3, Razor, Jquery, and Entity Framework: This is a simple flashcard application. It shows a card and allows you to test yourself against the answers. You can also add a new flashcard, or edit existing flashcards. I wrote it to help myself learn these technologies and thought you'd like to see a simple example, too.libopc: libopc is a standard conformant, cross-platform, open source, standard C-based implementation of Part II (OPC) and Part III (MCE) of the ISO/IEC 29500 specification (OOXML). Love in AHU: For more detail, please refer to http://www.loveinahu.cnMoonUnit: MoonUnit is a unit testing framework. It's designed to be small and compact, yet powerful. It's developed in C#.NUnit4PowerShell: NUnit4PowerShell has been done to test PowerShell scripts with the NUnit framework. Fixtures are written in PowerShell and this dll will read and execute them. The goal is to automatically execute unit tests, for instance with a Hudson job, and look for scripts regressions.Phoenix 2 - .NET Web Browser: Phoenix 2 - .NET Web Browser SQLITE Favourties and History DB Fast, clean UI, various tools. SharePoint Filter Enabled Content Query Web Part: This project is an enhanced version of SharePoint's Content Query WebPart. It enables you to send filtered data connection values to the CQWP Filter Fields. It also enables you to edit the Item and Header XSLT, and the CommonViewFields, directly from the Web Part Properties paneSilverlight 4 Toolkit Chart Zoom and Pan Extension: This solution extends the Silverlight 4 Toolkit Chart to give Zoom, Pan and Span functionality with frozen scrolling and no change to source!Simple Units of Measurement: Simple Units of Measurement is a C# Library, which eases the use of common Measurement Units like Kilogram, Meter, etc. This project is in early alpha stage.Spring ASP.NET Demonstration Application: Spring ASP.NET, Dependency Injection, ADO.NET, Data BindingSQL Server Management Studio (SSMS) AddIn to automatically name SQL windows: This project extends SQL Server Management Studio (2005, 2008 and 2008R2) by automatically naming SQL windows - no more searching through hundreds of untitled windows looking for the one you want, and no more having hundreds of windows open. Also auto-saves all SQL.StudioSite Image Preloader - jQuery-based image preloader: Features: - Javascript library - Preloads images for faster display - Support loading queue (loads one image at once) - Support notifications Author: Ivan Nikitin (ivan@indevel.net) Usage: See Demo.htm Requirements: - jQuery v1.4.4 - Low Pro JQ - Jasmine for testingSuperNover: SuperNover is a OS based on COSMOS system with a good GUI and framework.USN Journal Explorer: This is a project based around StCroixSkipper's USN Journal Explorer to read the NTFS Disk Structures. All work is attributed to StCroixSkipper, I simply brought it together here. The original site can found here http://www.dreamincode.net/forums/blog/1017-stcroixskippersWithingsLib (Withings Body Scale .NET Wrapper): This is a wrapper for the Withings Body metrics Services API (WBS API) including a sample app. Use is wrapper to read data from you withings scale to use it in your application.

  Read the article

• Uninstall, Disable, or Remove Windows 7 Media Center

  - by Mysticgeek

  Although Windows 7 Media Center has improved a lot over previous versions of Windows, but you might want to disable it for different reasons. Here we take a look at a couple of methods to get rid of it. There are a variety of reasons you might want to disable Windows 7 Media Center. Maybe you own a business and don’t want it to run on the machines. Or perhaps you don’t use it at all and just don’t want it around. Turn Off WMC Using Programs and Features Probably the easiest way to get rid of it on all versions of Windows 7 is to open Control Panel and select Programs and Features. This method is similar to disabling Internet Explorer 8 in Windows 7. On the left hand panel click on Turn Windows Features on or off. Scroll down to Media Features and expand the folder. Then Uncheck Windows Media Center… You’ll get a verification message making sure you want to disable it, click Yes. Then the box next to Windows Media Center will be empty…click OK. Wait while WMC is disabled… To complete the process a reboot is required. After getting back from the restart, the WMC icon will be gone and there won’t be any way to launch it. Re-enable WMC If you want to re-enable it, just go back in and recheck it. Again you’ll need to wait while it’s configured, but when it’s done, a restart is not required.   Disable Media Center Using Group Policy Note: This process uses Group Policy Editor which is not available in Home versions of Windows 7. Click on the Start menu and type gpedit.msc into the Search box and hit Enter. Now navigate to User Configuration \ Administrative Templates \ Windows Components \ Windows Media Center. Double-click on Do not allow Windows Media Center to run. Then select the radio button next to Enabled, click OK and close out of Group Policy Editor. Now if a user tries to launch WMC they will get the following message. Conclusion If you’re not a fan of Windows Media Center or want to disable it for whatever reason, the process is simple and there are a couple of ways you can do it. WMC is not included in Starter or Home Basic versions of Windows 7. If you’re new to Windows 7 Media Center, you might want to check out our guide on getting started and setting up live TV. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Disable Windows Mobility Center in Windows 7 or VistaMake Outlook Faster by Disabling Unnecessary Add-InsSchedule Updates for Windows Media CenterRemove "Map Network Drive" Menu Item from Windows Vista or XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa !

  Read the article

< Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >