Search Results

Search found 21436 results on 858 pages for 'draw order'.

Page 636/858 | < Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >

  • Walmart's Mobile Self-Checkout

    - by David Dorf
    Reuters recently reported that Walmart was testing an iPhone-based self-checkout at a store near its headquarters.  Consumers scan items as they're placed in the physical basket, then the virtual basket is transferred to an existing self-checkout station where payment is tendered.  A very solid solution, but not exactly original. Before we go further, let's look at the possible cost savings for Walmart.  According to the article: Pushing more shoppers to scan their own items and make payments without the help of a cashier could save Wal-Mart millions of dollars, Chief Financial Officer Charles Holley said on March 7. The company spends about $12 million in cashier wages every second at its Walmart U.S. stores. Um, yeah. Using back-of-the-napkin math, I calculated Walmart's cashiers are making $157k per hour.  A more accurate statement would be saving $12M per year for each second saved on the average transaction time.  So if this self-checkout approach saves 2 seconds per transaction on average, Walmart would save $24M per year on labor.  Maybe.  Sometimes that savings will be used to do other tasks in the store, so it may not directly translate to less employees. When I saw this approach demonstrated in Sweden, there were a few differences, which may or may not be in Walmart's plans.  First, the consumers were identified based on their loyalty card.  In order to offset the inevitable shrink, retailers need to save on labor but also increase basket size, typically via in-aisle promotions.  As they scan items, retailers should target promos, and that's easier to do if you know some shopping history.  Last I checked, Walmart had no loyalty program. Second, at the self-checkout station consumers were randomly selected for an audit in which they must re-scan all the items just like you do at a typical self-checkout.  If you were found to be stealing, your ability to use the system can be revoked.  That's a tough one in the US, especially when the system goes wrong, either by mistake or by lying.  At least in my view, the Swedes are bit more trustworthy than the people of Walmart. So while I think the idea of mobile self-checkout has merit, perhaps its not right for Walmart.

    Read the article

  • UK Oracle User Group Event: Trends in Identity Management

    - by B Shashikumar
    As threat levels rise and new technologies such as cloud and mobile computing gain widespread acceptance, security is occupying more and more mindshare among IT executives. To help prepare for the rapidly changing security landscape, the Oracle UK User Group community and our partners at Enline/SENA have put together an User Group event in London on Apr 19 where you can learn more from your industry peers about upcoming trends in identity management. Here are some of the key trends in identity management and security that we predicted at the beginning of last year and look how they have turned out so far. You have to admit that we have a pretty good track record when it comes to forecasting trends in identity management and security. Threat levels will grow—and there will be more serious breaches:   We have since witnessed breaches of high value targets like RSA and Epsilon. Most organizations have not done enough to protect against insider threats. Organizations need to look for security solutions to stop user access to applications based on real-time patterns of fraud and for situations in which employees change roles or employment status within a company. Cloud computing will continue to grow—and require new security solutions: Cloud computing has since exploded into a dominant secular trend in the industry. Cloud computing continues to present many opportunities like low upfront costs, rapid deployment etc. But Cloud computing also increases policy fragmentation and reduces visibility and control. So organizations require solutions that bridge the security gap between the enterprise and cloud applications to reduce fragmentation and increase control. Mobile devices will challenge traditional security solutions: Since that time, we have witnessed proliferation of mobile devices—combined with increasing numbers of employees bringing their own devices to work (BYOD) — these trends continue to dissolve the traditional boundaries of the enterprise. This in turn, requires a holistic approach within an organization that combines strong authentication and fraud protection, externalization of entitlements, and centralized management across multiple applications—and open standards to make all that possible.  Security platforms will continue to converge: As organizations move increasingly toward vendor consolidation, security solutions are also evolving. Next-generation identity management platforms have best-of-breed features, and must also remain open and flexible to remain viable. As a result, developers need products such as the Oracle Access Management Suite in order to efficiently and reliably build identity and access management into applications—without requiring security experts. Organizations will increasingly pursue "business-centric compliance.": Privacy and security regulations have continued to increase. So businesses are increasingly look for solutions that combine strong security and compliance management tools with business ready experience for faster, lower-cost implementations.  If you'd like to hear more about the top trends in identity management and learn how to empower yourself, then join us for the Oracle UK User Group on Thu Apr 19 in London where Oracle and Enline/SENA product experts will come together to share security trends, best practices, and solutions for your business. Register Here.

    Read the article

  • NEW: Oracle Certification Exam Preparation Seminars

    - by Harold Green
    Hi Everyone, I am really excited about a new offering that we are announcing this week - Oracle Certification Exam Preparation Seminars. These are something that will make a big difference for many of you in your efforts to become certified and move your career forward. They are also something that have previously only been available (but very popular) to the limited number of customers who have attended our annual conferences in San Francisco (Oracle OpenWorld and JavaOne). These are the first in a series of offerings that we are releasing over the next few months. So for those of you either preparing or considering Oracle certification - keep watching here on the blog, Facebook, Twitter and the Oracle Certification website for additional announcements related to our most popular certification areas. Details of the new Exam Preparation Seminars are found below: NEW: ORACLE CERTIFICATION EXAM PREPARATION SEMINARS Becoming Oracle certified is a great way to build your career, gain additional credibility and improve your earning power. We know that the decision to become certified is not trivial. Our surveys indicate that people consider their time investment a critical factor in their decision to become certified. Your time is important. In order to help candidates maximize the efficiency of their study time we are releasing a new series of video-based seminars called Exam Preparation Seminars. These seminars are patterned after the extremely popular Exam Cram sessions that until now have only been available at our annual customer conferences (Oracle Open World and JavaOne). Beginning today they are now available to anyone, anywhere as a part of this Exam Prep Seminar series. Features: Fast-paced objective by objective review of the exam topics - led by top Oracle University instructors 24/7 access through Oracle University's training on demand platform. Ability to re-watch all or part of the the seminar. All the conveniences of video-based training: start, stop, fast-forward, skip, rewind, review. Tips that will help you better understand what you need to know to pass the exam. The Exam Preparation Seminars are meant to help anyone with a working knowledge of the technology get that extra boost to help them finalize their preparation, and will help anyone who wants a better understanding of the the depth and breadth of the exam topics and objectives. Benefits: Save time by understanding what you should study. Makes you efficient because you will understand the breadth and depth of each of the exam topics. Helps you create a better, more efficient study plan. Improves your confidence in your skills and ability to pass the certification exam. Exam Preparation Seminars are available individually, or in convenient Value Packages (which include the Exam Preparation Seminar, and an exam voucher which includes one free-retake if you need it). Currently we are releasing two seminars - one for DBA SQL and one for DBA Administration I. Additional offerings are in process. Find out more: General WEB: Oracle Certification Exam Preparation Seminars VIDEO: Exam Preparation Seminars Promo (1:27) Oracle Database Administration I (11g, 10g) VIDEO: Instructor Introduction (1:08) VIDEO: Sample Video (2:16) Oracle Database SQL VIDEO: Instructor Introduction (1:08) VIDEO: Sample Video (2:16)

    Read the article

  • Why can't a blendShader sample anything but the current coordinate of the background image?

    - by Triynko
    In Flash, you can set a DisplayObject's blendShader property to a pixel shader (flash.shaders.Shader class). The mechanism is nice, because Flash automatically provides your Shader with two input images, including the background surface and the foreground display object's bitmap. The problem is that at runtime, the shader doesn't allow you to sample the background anywhere but under the current output coordinate. If you try to sample other coordinates, it just returns the color of the current coordinate instead, ignoring the coordinates you specified. This seems to occur only at runtime, because it works properly in the Pixel Bender toolkit. This limitation makes it impossible to simulate, for example, the Aero Glass effect in Windows Vista/7, because you cannot sample the background properly for blurring. I must mention that it is possible to create the effect in Flash through manual composition techniques, but it's hard to determine when it actually needs updated, because Flash does not provide information about when a particular area of the screen or a particular display object needs re-rendered. For example, you may have a fixed glass surface with objects moving underneath it that don't dispatch events when they move. The only alternative is to re-render the glass bar every frame, which is inefficient, which is why I am trying to do it through a blendShader so Flash determines when it needs rendered automatically. Is there a technical reason for this limitation, or is it an oversight of some sort? Does anyone know of a workaround, or a way I could provide my manual composition implementation with information about when it needs re-rendered? The limitation is mentioned with no explanation in the last note in this page: http://help.adobe.com/en_US/as3/dev/WSB19E965E-CCD2-4174-8077-8E5D0141A4A8.html It says: "Note: When a Pixel Bender shader program is run as a blend in Flash Player or AIR, the sampling and outCoord() functions behave differently than in other contexts.In a blend, a sampling function will always return the current pixel being evaluated by the shader. You cannot, for example, use add an offset to outCoord() in order to sample a neighboring pixel. Likewise, if you use the outCoord() function outside a sampling function, its coordinates always evaluate to 0. You cannot, for example, use the position of a pixel to influence how the blended images are combined."

    Read the article

  • Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

    - by Giri Mandalika
    An Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com.     The Oracle Optimized Solution for Oracle E-Business Suite This solution was centered around the engineered system, SPARC SuperCluster T4-4. Check the business and technical white papers along with a bunch of relevant useful resources online at the above optimized solution page for EBS. What is an Optimized Solution? Oracle's Optimized Solutions are designed, tested and fully documented architectures that are tuned for optimal performance and availability. Optimized solutions are NOT pre-packaged, fully tuned, ready-to-install software bundles that can be downloaded and installed. An optimized solution is usually a well documented architecture that was thoroughly tested on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 Use Case Multiple E-Business Suite R12 12.1.3 application modules were tested in this optimized solution -- Financials (online - oracle forms & web requests), Order Management (online - oracle forms & web req uests) and HRMS (online - web requests & payroll batch). The solution will be updated with additional application modules, when they are available. Oracle Solaris Cluster is responsible for the high availability portion of the solution. Performance Data For the sake of completeness, test results were also documented in the optimized solution white paper. Those test results are mainly for educational purposes only. They give good sense of application behavior under the circumstances the application was tested. Since the major focus of the optimized solution is around highly available and scalable configurations, the application was configured to me et those criteria. Hence the documented test results are not directly comparable to any other E-Business Suite performance test results published by any vendor including Oracle. Such an attempt may lead to skewed, incorrect conclusions. Questions & Requests Feel free to direct your questions to the author of the white papers. If you are a potential customer who would like to test a specific E-Business Suite application module on any non-engineered syste m such as SPARC T4-X or engineered system such as SPARC SuperCluster, contact Oracle Solution Center.

    Read the article

  • BIP 10.1.3.4.x June 2010 Update Available

    - by Tim Dexter
    A new patchset for 10.1.3.4.0 and 10.1.3.4.1 is available on Metalink. some notes: The patch number is 9791839. This patchset includes 28 new bug fixes since the last patchset release on March 31. This is a culmulative update that includes all the fixes and enhancements from previous updates. The patch will supercede the other two updates. Install instructions are in the readme inside the patch There is also a new BIP client patch available, 9821068. No new template building features to my knowledge but there is an update to the template viewer to allow you to test and debug you siny new Excel templates. Server 8529759XMLP_TEMPLATE_DESIGNER CANNOT SAVE / UPLOAD TEMPLATE 8566455 BI PUBLISHER SCHEDULER DOES NOT START WITH JNDI DATA SOURCE 9295667RESPONSE OF GETSCHEDULEDREPORTINFO RETURNS STATUS AS 'UNKNOWN' INSTEAD OF 'SCHED 9542413 UNABLE TO CREATE A NEW TEMPLATE FROM UI 9546137 EXCEL ANALYZER TEMPLATE FAILS FOR A STRUCTURED XML WHEN IT IS UPLOADED 9556338 SIEBEL - BIP PARAMETERS SORT ORDER 9560562 BI PUBLISHER CACHE DIRECTORY FILLING UP AND POINTING TO INVALID DIRECTORY 9646599 USER ROLE DEFINED AS PRIMARYGROUP IN ACTIVEDIRECTORY GROUP ARE NOT RECOGNIZED 9664768 ER: NEED TO BIND USER ATTRIBUTE VALUES DEFINED IN ACTIVEDIRECTORY IN DATA QUERY 9665075 BI PUBLISHER AFTER 9546699 NOTIFICATIONS FOR REPORTS FAIL 9669973 ER: NEED TO SUPPORT PRE-PROCESSING XML WITH XSL FOR EXCEL TEMPLATE 9704401 ER: NEED TO SUPPORT DEFAULT GROUP FOR ALL USERS IN LDAP/AD SECURITY 9711899 SEARCH PARAMETER IS NOT VISIBLE WHEN SCHEDULE A REPORT 9753736 SOME ROLES FROM ACTIVEDIRECTORY ARE NOT LISTED IN ADMIN ROLE-FOLDER MAPPING 9771354 MULTIPLE PARAMETERS IN 10.1.3.4.1 DATA TEMPLATE ACT ACT DIFFERENTLY FROM 10.1.3. 9772982 "REFRESH OTHER PARAMETERS ON CHANGE" DOESN'T WORK PROPERLY Core  8599646 ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 9377593 SOME ROWS HEIGHT IN HTML/EXCEL OUTPUT ARE TOO BIG IN BI PUBLISHER 9487030 NAVIGATION TREE REPEATING TWICE IN PDF DCCUMENT CREATED BY BI PUBLISHER 9509432 PERFORMANCE ISSUE WHEN USING PDF TEMPLATE 9534424 PS: DOCUMENT-REPEAT-FULLPATH-ELEMENTNAME SHOULDNT USE DOT "." AS PATH SEPARATOR 9553360 FORMPROCESSOR CANNOT PARSE SOME PDF TEMPLATES 9554959 TEXT IN AUTOSHAPE IS NOT PROPERLY CUT OFF FOR LINE WRAPPING 9569417 AFTER APPLYING PATCH 9509432 PDF TEMPLATES WITH DBDRV PRODUCE NO OUTPUT 9571670 ER: EXCEL TEMPLATE TO SUPPORT XSLT LOGIC AND XSL CUSTOM EXTENTIONS 9589809 XSL:CALL-TEMPLATE IS MISSING IN GENERATED XSL FILE 9605920 BOOKMARK TESTCASE FAILED DUE TO ER9283933 9689634 PRINT FLOW CHART USING ACROSS 3 DOWN 0 GIVES EXTRA BLANK PAGES You might have noticed some fixes and ehancements to the Excel templates so I can get back on those now. There is a part two to the Mapviewer BIP Mashup coming ... just need aanother 4 hours in the day to squeeze it in.

    Read the article

  • Compiling for T4

    - by Darryl Gove
    I've recently had quite a few queries about compiling for T4 based systems. So it's probably a good time to review what I consider to be the best practices. Always use the latest compiler. Being in the compiler team, this is bound to be something I'd recommend But the serious points are that (a) Every release the tools get better and better, so you are going to be much more effective using the latest release (b) Every release we improve the generated code, so you will see things get better (c) Old releases cannot know about new hardware. Always use optimisation. You should use at least -O to get some amount of optimisation. -xO4 is typically even better as this will add within-file inlining. Always generate debug information, using -g. This allows the tools to attribute information to lines of source. This is particularly important when profiling an application. The default target of -xtarget=generic is often sufficient. This setting is designed to produce a binary that runs well across all supported platforms. If the binary is going to be deployed on only a subset of architectures, then it is possible to produce a binary that only uses the instructions supported on these architectures, which may lead to some performance gains. I've previously discussed which chips support which architectures, and I'd recommend that you take a look at the chart that goes with the discussion. Crossfile optimisation (-xipo) can be very useful - particularly when the hot source code is distributed across multiple source files. If you're allowed to have something as geeky as favourite compiler optimisations, then this is mine! Profile feedback (-xprofile=[collect: | use:]) will help the compiler make the best code layout decisions, and is particularly effective with crossfile optimisations. But what makes this optimisation really useful is that codes that are dominated by branch instructions don't typically improve much with "traditional" compiler optimisation, but often do respond well to being built with profile feedback. The macro flag -fast aims to provide a one-stop "give me a fast application" flag. This usually gives a best performing binary, but with a few caveats. It assumes the build platform is also the deployment platform, it enables floating point optimisations, and it makes some relatively weak assumptions about pointer aliasing. It's worth investigating. SPARC64 processor, T3, and T4 implement floating point multiply accumulate instructions. These can substantially improve floating point performance. To generate them the compiler needs the flag -fma=fused and also needs an architecture that supports the instruction (at least -xarch=sparcfmaf). The most critical advise is that anyone doing performance work should profile their application. I cannot overstate how important it is to look at where the time is going in order to determine what can be done to improve it. I also presented at Oracle OpenWorld on this topic, so it might be helpful to review those slides.

    Read the article

  • how do I set quad buffering with jogl 2.0

    - by tony danza
    I'm trying to create a 3d renderer for stereo vision with quad buffering with Processing/Java. The hardware I'm using is ready for this so that's not the problem. I had a stereo.jar library in jogl 1.0 working for Processing 1.5, but now I have to use Processing 2.0 and jogl 2.0 therefore I have to adapt the library. Some things are changed in the source code of Jogl and Processing and I'm having a hard time trying to figure out how to tell Processing I want to use quad buffering. Here's the previous code: public class Theatre extends PGraphicsOpenGL{ protected void allocate() { if (context == null) { // If OpenGL 2X or 4X smoothing is enabled, setup caps object for them GLCapabilities capabilities = new GLCapabilities(); // Starting in release 0158, OpenGL smoothing is always enabled if (!hints[DISABLE_OPENGL_2X_SMOOTH]) { capabilities.setSampleBuffers(true); capabilities.setNumSamples(2); } else if (hints[ENABLE_OPENGL_4X_SMOOTH]) { capabilities.setSampleBuffers(true); capabilities.setNumSamples(4); } capabilities.setStereo(true); // get a rendering surface and a context for this canvas GLDrawableFactory factory = GLDrawableFactory.getFactory(); drawable = factory.getGLDrawable(parent, capabilities, null); context = drawable.createContext(null); // need to get proper opengl context since will be needed below gl = context.getGL(); // Flag defaults to be reset on the next trip into beginDraw(). settingsInited = false; } else { // The following three lines are a fix for Bug #1176 // http://dev.processing.org/bugs/show_bug.cgi?id=1176 context.destroy(); context = drawable.createContext(null); gl = context.getGL(); reapplySettings(); } } } This was the renderer of the old library. In order to use it, I needed to do size(100, 100, "stereo.Theatre"). Now I'm trying to do the stereo directly in my Processing sketch. Here's what I'm trying: PGraphicsOpenGL pg = ((PGraphicsOpenGL)g); pgl = pg.beginPGL(); gl = pgl.gl; glu = pg.pgl.glu; gl2 = pgl.gl.getGL2(); GLProfile profile = GLProfile.get(GLProfile.GL2); GLCapabilities capabilities = new GLCapabilities(profile); capabilities.setSampleBuffers(true); capabilities.setNumSamples(4); capabilities.setStereo(true); GLDrawableFactory factory = GLDrawableFactory.getFactory(profile); If I go on, I should do something like this: drawable = factory.getGLDrawable(parent, capabilities, null); but drawable isn't a field anymore and I can't find a way to do it. How do I set quad buffering? If I try this: gl2.glDrawBuffer(GL.GL_BACK_RIGHT); it obviously doesn't work :/ Thanks.

    Read the article

  • ArchBeat Facebook Friday: Top 10 Shared Links - May 23-29, 2014

    - by OTN ArchBeat
    Among the 5,144 fans of the OTN ArchBeat Facebook Page the following Top 10 items were the most popular over the last seven days, May 23-29, 2014. GlassFish/Java EE Community Open Forum Today! | Reza Rahman Have questions about Glassfish? Java EE/GlassFish evangelist Reza Rahman has answers, and you can pick his brain tomorrow during an online forum organized by the London Glassfish User Group and C2B2. The event is free, but you must register in order to participate. Click the link for more information. Twitter Tuesday - Top 10 @ArchBeat Tweets - May 20-26, 2014 The top 10 @OTNArchBeat tweets for the week of May 20-26, 2014. Topics covered include ADF, Cloud, GoldenGate, KScope14, OBIEE, ODI, WebLogic, WebCenter, and more. FrameworkFolders Support has come to Oracle WebCenter Portal | JayJay Zheng Interested in working with Framework Folders in Oracle WebCenter Portal? Oracle ACE JayJay Zheng reviews the essentials. Video: Programming Best Practices - ADF Business Components | Frank Nimphius Frank Nimphius discusses best practices and recommendations for ADF Business Components in the latest video from ADF Architecture TV. Video: Kscope 2014 Preview: Data Modeling and Moving Meditation with Kent Graziano For your mind and your body! Oracle ACE Director Kent Graziano previews his Kscope 2014 data modeling presentations and the early morning Chi Gung sessions he will once again lead for Kscope attendees. OAG and OES Integration for Web API Security: skin and guts | Andre Correa A-Team architect Andre Correa's post examines a strategy for web API security that uses OAG (Oracle API Gateway) and OES (Oracle Entitlements Server). Getting Started with Coherence*Web in WebLogic Server 12.1.2 | Tim Middleton Solution architect Tim Middleton shows you how to configure Coherence*Web in WebLogic Server 12.1.2 and deploy a basic web application. SOA and Business Processes: You are the Process! Part of the 13-part "Industrial SOA" article series, this article looks at best practices for modeling and managing effective business processes. Authentication in Oracle Identity Federation/ IdP | Damien Carru Damien Carru discuss authentication when OIF acts as an IdP and how the server can be configured to use specific OAM Authentication Schemes to challenge the user. Caveats on Using WebLogic Server with JDK7 | JayJay Zheng Quick tech tips from Oracle ACE JayJay Zheng.

    Read the article

  • Base Pages and Interfaces for ASP.NET Pages

    - by geekrutherford
    For quite a while I have been using the concept of base pages when developing pages in ASP.NET applications. It is a wonderful method for exposing common functions to all of your applications pages and also overriding certain events for various purposes (i.e. dynamic themes).  Recently I found out a new developer will be joining my team. This prompted me to review the applications code for readability and ease of maintenance. I began adding comments through out the code behind for all pages within the application. While doing so I noted that I had used common method names for such things as loading data, configuring controls, applying filters, etc.   Bringing a new developer on board, I wanted to make the transition as seamless as possible while also ensuring they follow existing coding practices we already have in place. While I could have created virtual methods for the common page methods allowing them to overridden, what I really needed was a way to ensure the new developer implemented the same methods for each and every page. Thus I created an interface to force the issue.   Now, every page not only inherits the base page class but also implements an interface. This provides every page not only common functions and overridden page events but also imposes rules for implementing certain common methods :-)   Interface   public interface BasePageInterface { /// Configures page based on users security permissions. void CheckPermissions(); /// Configures Filter Form control for current page.  /// Ensure you have set the FilteredGrid and PageAjaxManager properties of the FilterForm control in PageLoad!!!  void ConfigureFilters(); /// Sets event handlers and default settings for controls on the current page. void ConfigureControls(); /// Exports data bound to grid in selected format. void ExportGridData(ExportFormat fmt); /// Loads data and binds to grid. /// Columns are turned on/off in grid depending on tab selected and users permissions.  void LoadData(); }   Page code-behind class definition:   public partial class MyPage : BasePage, BasePageInterface Note, you could not use an abstract class to accomplish this considering C# does not allow for multiple inheritance.  Nor could the base page class be abstract since it needs to inherit from the System.Web.UI.Page class in order to override page events.

    Read the article

  • What Precalculus knowledge is required before learning Discrete Math Computer Science topics?

    - by Ein Doofus
    Below I've listed the chapters from a Precalculus book as well as the author recommended Computer Science chapters from a Discrete Mathematics book. Although these chapters are from two specific books on these subjects I believe the topics are generally the same between any Precalc or Discrete Math book. What Precalculus topics should one know before starting these Discrete Math Computer Science topics?: Discrete Mathematics CS Chapters 1.1 Propositional Logic 1.2 Propositional Equivalences 1.3 Predicates and Quantifiers 1.4 Nested Quantifiers 1.5 Rules of Inference 1.6 Introduction to Proofs 1.7 Proof Methods and Strategy 2.1 Sets 2.2 Set Operations 2.3 Functions 2.4 Sequences and Summations 3.1 Algorithms 3.2 The Growths of Functions 3.3 Complexity of Algorithms 3.4 The Integers and Division 3.5 Primes and Greatest Common Divisors 3.6 Integers and Algorithms 3.8 Matrices 4.1 Mathematical Induction 4.2 Strong Induction and Well-Ordering 4.3 Recursive Definitions and Structural Induction 4.4 Recursive Algorithms 4.5 Program Correctness 5.1 The Basics of Counting 5.2 The Pigeonhole Principle 5.3 Permutations and Combinations 5.6 Generating Permutations and Combinations 6.1 An Introduction to Discrete Probability 6.4 Expected Value and Variance 7.1 Recurrence Relations 7.3 Divide-and-Conquer Algorithms and Recurrence Relations 7.5 Inclusion-Exclusion 8.1 Relations and Their Properties 8.2 n-ary Relations and Their Applications 8.3 Representing Relations 8.5 Equivalence Relations 9.1 Graphs and Graph Models 9.2 Graph Terminology and Special Types of Graphs 9.3 Representing Graphs and Graph Isomorphism 9.4 Connectivity 9.5 Euler and Hamilton Ptahs 10.1 Introduction to Trees 10.2 Application of Trees 10.3 Tree Traversal 11.1 Boolean Functions 11.2 Representing Boolean Functions 11.3 Logic Gates 11.4 Minimization of Circuits 12.1 Language and Grammars 12.2 Finite-State Machines with Output 12.3 Finite-State Machines with No Output 12.4 Language Recognition 12.5 Turing Machines Precalculus Chapters R.1 The Real-Number System R.2 Integer Exponents, Scientific Notation, and Order of Operations R.3 Addition, Subtraction, and Multiplication of Polynomials R.4 Factoring R.5 Rational Expressions R.6 Radical Notation and Rational Exponents R.7 The Basics of Equation Solving 1.1 Functions, Graphs, Graphers 1.2 Linear Functions, Slope, and Applications 1.3 Modeling: Data Analysis, Curve Fitting, and Linear Regression 1.4 More on Functions 1.5 Symmetry and Transformations 1.6 Variation and Applications 1.7 Distance, Midpoints, and Circles 2.1 Zeros of Linear Functions and Models 2.2 The Complex Numbers 2.3 Zeros of Quadratic Functions and Models 2.4 Analyzing Graphs of Quadratic Functions 2.5 Modeling: Data Analysis, Curve Fitting, and Quadratic Regression 2.6 Zeros and More Equation Solving 2.7 Solving Inequalities 3.1 Polynomial Functions and Modeling 3.2 Polynomial Division; The Remainder and Factor Theorems 3.3 Theorems about Zeros of Polynomial Functions 3.4 Rational Functions 3.5 Polynomial and Rational Inequalities 4.1 Composite and Inverse Functions 4.2 Exponential Functions and Graphs 4.3 Logarithmic Functions and Graphs 4.4 Properties of Logarithmic Functions 4.5 Solving Exponential and Logarithmic Equations 4.6 Applications and Models: Growth and Decay 5.1 Systems of Equations in Two Variables 5.2 System of Equations in Three Variables 5.3 Matrices and Systems of Equations 5.4 Matrix Operations 5.5 Inverses of Matrices 5.6 System of Inequalities and Linear Programming 5.7 Partial Fractions 6.1 The Parabola 6.2 The Circle and Ellipse 6.3 The Hyperbola 6.4 Nonlinear Systems of Equations

    Read the article

  • Data Transformation Pipeline

    - by davenewza
    I have create some kind of data pipeline to transform coordinate data into more useful information. Here is the shell of pipeline: public class PositionPipeline { protected List<IPipelineComponent> components; public PositionPipeline() { components = new List<IPipelineComponent>(); } public PositionPipelineEntity Process(Position position) { foreach (var component in components) { position = component.Execute(position); } return position; } public PositionPipeline RegisterComponent(IPipelineComponent component) { components.Add(component); return this; } } Every IPipelineComponent accepts and returns the same type - a PositionPipelineEntity. Code: public interface IPipelineComponent { PositionPipelineEntity Execute(PositionPipelineEntity position); } The PositionPipelineEntity needs to have many properties, many which are unused in certain components and required in others. Some properties will also have become redundant at the end of the pipeline. For example, these components could be executed: TransformCoordinatesComponent: Parse the raw coordinate data into a Coordinate type. DetermineCountryComponent: Determine and stores country code. DetermineOnRoadComponent: Determine and store whether coordinate is on a road. Code: pipeline .RegisterComponent(new TransformCoordinatesComponent()) .RegisterComponent(new DetermineCountryComponent()) .RegisterComponent(new DetermineOnRoadComponent()); pipeline.Process(positionPipelineEntity); The PositionPipelineEntity type: public class PositionPipelineEntity { // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLatitude { get; set; } // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLongitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLatitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLongitude { get; set; } // Set in DetermineCountryComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public string CountryCode { get; set; } // Set in DetermineOnRoadComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public bool OnRoad { get; set; } } Problems: I'm very concerned about the dependency that a component has on properties. The way to solve this would be to create specific types for each component. The problem then is that I cannot chain them together like this. The other problem is the order of components in the pipeline matters. There is some dependency. The current structure does not provide any static or runtime checking for such a thing. Any feedback would be appreciated.

    Read the article

  • Why is Double.Parse so slow?

    - by alexhildyard
    I was recently investigating a bottleneck in one of my applications, which read a CSV file from disk using a TextReader a line at a time, split the tokens, called Double.Parse on each one, then shunted the results into an object list. I was surprised to find it was actually the Double.Parse which seemed to be taking up most of the time.Googling turned up this, which is a little unfocused in places but throws out some excellent ideas:It makes more sense to work with binary format directly, rather than coerce strings into doublesThere is a significant performance improvement in composing doubles directly from the byte stream via long intermediariesString.Split is inefficient on fixed length recordsIn fact it turned out that my problem was more insidious and also more mundane -- a simple case of bad data in, bad data out. Since I had been serialising my Doubles as strings, when I inadvertently divided by zero and produced a "NaN", this of course was serialised as well without error. And because I was reading in using Double.Parse, these "NaN" fields were also (correctly) populating real Double objects without error. The issue is that Double.Parse("NaN") is incredibly slow. In fact, it is of the order of 2000x slower than parsing a valid double. For example, the code below gave me results of 357ms to parse 1000 NaNs, versus 15ms to parse 100,000 valid doubles.            const int invalid_iterations = 1000;            const int valid_iterations = invalid_iterations * 100;            const string invalid_string = "NaN";            const string valid_string = "3.14159265";            DateTime start = DateTime.Now;                        for (int i = 0; i < invalid_iterations; i++)            {                double invalid_double = Double.Parse(invalid_string);            }            Console.WriteLine(String.Format("{0} iterations of invalid double, time taken (ms): {1}",                invalid_iterations,                ((TimeSpan)DateTime.Now.Subtract(start)).Milliseconds            ));            start = DateTime.Now;            for (int i = 0; i < valid_iterations; i++)            {                double valid_double = Double.Parse(valid_string);            }            Console.WriteLine(String.Format("{0} iterations of valid double, time taken (ms): {1}",                valid_iterations,                ((TimeSpan)DateTime.Now.Subtract(start)).Milliseconds            )); I think the moral is to look at the context -- specifically the data -- as well as the code itself. Once I had corrected my data, the performance of Double.Parse was perfectly acceptable, and while clearly it could have been improved, it was now sufficient to my needs.

    Read the article

  • OpenWorld in Small Bites

    - by Kathryn Perry
    Fifty thousand attendees -- that's bigger than the cities some of us live in. Monday morning it took 20 minutes to get from Hall D in Moscone North to a conference room in Moscone South -- the crowds were crushing! A great start to a great week! Larry is as big a name as ever on the program schedule and on the Moscone stage. People were packed in Hall D and clustered around every big screen TV. He stayed on script as he laid out Oracle's SaaS, PaaS, and IaaS strategies. Every seat in Chris Leone's Fusion Apps Cloud Overview was filled on Monday morning. Oracle employees who wanted to get in were turned away. And the same thing happened in the repeat session on Wednesday. Our newest suite of apps is hot! Speaking of hot, the weather was made to order. Then it turned very San Francisco-like on Wednesday afternoon. Downright cold for those who trusted SF temps to hold in the 80's. Who did you follow on Twitter during the conference? So many voices, opinions, and convos! Great combo of social media and sharp minds. Be sure to follow @larryellison, @stevenrmiranda, and @Oracle for updates and MyPOVs. Keywords for the Apps customers at the conference were cloud, mobile, and social. Every day, every session, every speaker. Wednesday afternoon, 4 pm at the Four Seasons hotel. A large roomful of analysts and influencers firing questions at a panel of eight Fusion customers. Steve Miranda moderating. Good energy and a great exchange of information and confidence. Word on the street is that OpenWorld has outgrown San Francisco -- but moving it seems unthinkable. The city isn't just a backdrop for an industry conference - it's a headliner right up there with Larry Ellison and Pearl Jam. As you can imagine, electrical outlets were in high demand at every venue. The most popular hotels and bars near Moscone designed their interiors around accessible electrical power strips. People are plenty willing to buy a drink while they grab a charge. Wednesday afternoon, 4 pm at the Four Seasons hotel. A large roomful of analysts and influencers firing questions at a panel of eight Fusion customers. Steve Miranda moderating. Good energy and a great exchange of information and confidence. Treasure Island in the dark. Eddy Vedder has an amazing voice! And Kings of Leon over delivered on people's expectations. It was cold. It was windy. It was very fun. One analyst said it's the best customer appreciation party in the industry. 

    Read the article

  • Are there any concerns with using a static read-only unit of work so that it behaves like a cache?

    - by Rowan Freeman
    Related question: How do I cache data that rarely changes? I'm making an ASP.NET MVC4 application. On every request the security details about the user will need to be checked with the area/controller/action that they are accessing to see if they are allowed to view it. The security information is stored in the database. For example: User Permission UserPermission Action ActionPermission A "Permission" is a token that is applied to an MVC action to indicate that the token is required in order to access the action. Once a user is given the permission (via the UserPermission table) then they have the token and can therefore access the action. I've been looking in to how to cache this data (since it rarely changes) so that I'm only querying in-memory data and not hitting a database (which is a considerable performance hit at the moment). I've tried storing things in lists, using a caching provider but I either run in to problems or performance doesn't improve. One problem that I constantly run in to is that I'm using lazy loading and dynamic proxies with EntityFramework. This means that even if I ToList() everything and store them somewhere static, the relationships are never populated. For example, User.Permissions is an ICollection but it's always null. I don't want to Include() everything because I'm trying to keep things simple and generic (and easy to modify). One thing I know is that an EntityFramework DbContext is a unit of work that acts with 1st-level caching. That is, for the duration of the unit of work, everything that is accessed is cached in memory. I want to create a read-only DbContext that will exist indefinitely and will only be used to read about permission data. Upon testing this it worked perfectly; my page load times went from 200ms+ to 20ms. I can easily force the data to refresh at certain intervals or simply leave it to refresh when the application pool is recycled. Basically it will behave like a cache. Note that the rest of the application will interact with other contexts that exist per request as normal. Is there any disadvantage to this approach? Could I be doing something different?

    Read the article

  • Why should I not do a masters degree

    - by aurel
    I have left university on July 2010 where I studied web design (as we all know you learn more by your self but that’s not the issue at the moment). Since then I have not managed to find a job (apart from a one month work experience), from the way things are going, and by taking into account the fact that all my university friends are in the same situation, I don’t think that I am going to find a job soon (within the industry) Now as we all do, even though I don’t have a job, I am still working on personal projects and try to keep up to date (I don’t need a job or uni to do this) – but I am thinking, because there is not work available, would it be worth going back to uni for a master degree? I know I don’t need it and I know that is unlikely that I will learn anything important, as I believe in self learning, and in most cases it is a lot more effective (but I have to say I don’t mind going back to school) The only reason I am thinking of doing the master is, (and this is where I need your help): If it takes me a year to get a job, then on the interview, would the employer think “what the hell did this guy do since he left university” – now if I go to university that would solve this problem. Or I’m I making up a problem that does not exist Plus, I know that employers need examples of sites that I have been working on, at the moment I only have 3 (as when working on personal projects, where their is not time limit I tend drag things in order to get them perfect, and they never get perfect) – so by going back to uni, then this problem maybe solved I said all this as I have read a lot about the fact that you don’t need to have a masters degree to work on web design market (and I totally agree) but considering my concern, the question is should I do a masters course to avoid just spending hours in my room working and learning in my own (but that it would be hard to convince employers that I was really learning in my room) Maybe because I’m still young age 22 not that old anyway :), but I don’t have the “dream” of being rich, so if I were to tell the truth I don’t really care of the fact that I don’t have a job (at the moment), because regardless, I am working on what I love every day, but I know that in the future when I will need the job I may find it harder to get one, if I neglect doing so now Every time I ask a question that I’m not sure about, I keep going on and on, but I really hope you get what I am trying to get across. By the way the course that I am looking at for a masters says that it would teach me how to do these: e-commerce e-government e-science e-learning I don’t know any of them, a part from e-commerce Thanks

    Read the article

  • Modelling highly specific business requirements

    - by AndyBursh
    How can one go about modelling highly specific business requirements, which have no precedent in the system? Take for example the following requirement: When a purchase order contains N lines, is over X value in total and is being recorded against project Y, an email needs to be sent to persons A and B with the details This requirement supplements other requirements surrounding purchase orders, but comes in at a much later date in response to some ongoing problem elsewhere in the business. Persons A and B are not part of any role or group in the system, and don't hold any specific responsibility; they are simply the two people the business has appointed to receive these emails in this very specific case. Projects are also data driven, so project Y has no special properties to distinguish it from any other project. The only way to identify it is to compare its identifier to a magic number. How can one go about modelling this kind of case without introducing too much additional complexity? That I can think of right now, there are a couple of options. Perform the checks and actions inline with the existing code. Here we find the correct spot in the code, check the conditions in the requirement and send the emails to hardcoded addresses. Of course this is fraught with issues. At the very least it stops working if one of these people leaves or changes their email address. At worst you have to ensure that any tests and test data are aware that additional actions are taken for a specific set of criteria. Introduce some form of events system. Here we introduce an eventing system, so that we might react to some event, and fulfil the requirement outside of the usual path of execution. This sounds like a cleaner solution than option 1, but the work involved is ultimately probably slightly overkill for this one small requirement. That said, having it in place does allow the system to handle these kinds of specific requirements consistently and easily in the future. Are there any other (good/better) ways of handling highly specific requirements? I mean other than telling the other parts of the business no!

    Read the article

  • Quick run through of the WP7 Developer Tools January 2011

    - by mbcrump
    In case you haven’t heard the latest WP7 Developers Tool update was released yesterday and contains a few goodies. First you need to go and grab the bits here. You can install them in any order, but I installed the WindowsPhoneDeveloperResources_en-US_Patch1.msp first. Then the VS10-KB2486994-x86.exe. They install silently. In other words, you would need to check Programs and Features and look in Installed Updates to see if they installed successfully. Like the screenshot below: Once you get them installed you can try out a few new features. Like Copy and Paste. Just fire up your application and put a TextBox on it and Select the Text and you will have the option highlighted in red above the text. Once you select it you will have the option to paste it. (see red rectangle below). Another feature is the Windows Phone Capability Detection Tool – This tool detects the phone capabilities used by your application. This will prevent you from submitting an app to the marketplace that says it uses x feature but really does not. How do you use it? Well navigate out to either directory: %ProgramFiles%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect %ProgramFiles (x86)%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect and run the following command: CapabilityDetection.exe Rules.xml YOURWP7XAPFILEOUTPUTDIRECTORY So, in my example you will see my app only requires the ID_CAP_MICROPHONE. Let’s see what the WmAppManifest.xml says in our WP7 Project: Whoa! That’s a lot of extra stuff we don’t need. We can delete unused capabilities safely now. Some of the other fixes are: (Copied straight from Microsoft) Fixes a text selection bug in pivot and panorama controls. In applications that have pivot or panorama controls that contain text boxes, users can unintentionally change panes when trying to copy text. To prevent this problem, open your application, recompile it, and then resubmit it to the Windows Phone Marketplace. Windows Phone Connect Tool – Allows you to connect your phone to a PC when Zune® software is not running and debug applications that use media APIs. For more information, see How to: Use the Connect Tool. Updated Bing Maps Silverlight Control – Includes improvements to gesture performance when using Bing™ Maps Silverlight® Control. Windows Phone Developer Tools Fix allowing deployment of XAP files over 64 MB in size to physical phone devices for testing and debugging. That’s pretty much it. Thanks again for reading my blog!  Subscribe to my feed CodeProject

    Read the article

  • Why enumerator structs are a really bad idea (redux)

    - by Simon Cooper
    My previous blog post went into some detail as to why calling MoveNext on a BCL generic collection enumerator didn't quite do what you thought it would. This post covers the Reset method. To recap, here's the simple wrapper around a linked list enumerator struct from my previous post (minus the readonly on the enumerator variable): sealed class EnumeratorWrapper : IEnumerator<int> { private LinkedList<int>.Enumerator m_Enumerator; public EnumeratorWrapper(LinkedList<int> linkedList) { m_Enumerator = linkedList.GetEnumerator(); } public int Current { get { return m_Enumerator.Current; } } object System.Collections.IEnumerator.Current { get { return Current; } } public bool MoveNext() { return m_Enumerator.MoveNext(); } public void Reset() { ((System.Collections.IEnumerator)m_Enumerator).Reset(); } public void Dispose() { m_Enumerator.Dispose(); } } If you have a look at the Reset method, you'll notice I'm having to cast to IEnumerator to be able to call Reset on m_Enumerator. This is because the implementation of LinkedList<int>.Enumerator.Reset, and indeed of all the other Reset methods on the BCL generic collection enumerators, is an explicit interface implementation. However, IEnumerator is a reference type. LinkedList<int>.Enumerator is a value type. That means, in order to call the reset method at all, the enumerator has to be boxed. And the IL confirms this: .method public hidebysig newslot virtual final instance void Reset() cil managed { .maxstack 8 L_0000: nop L_0001: ldarg.0 L_0002: ldfld valuetype [System]System.Collections.Generic.LinkedList`1/Enumerator<int32> EnumeratorWrapper::m_Enumerator L_0007: box [System]System.Collections.Generic.LinkedList`1/Enumerator<int32> L_000c: callvirt instance void [mscorlib]System.Collections.IEnumerator::Reset() L_0011: nop L_0012: ret } On line 0007, we're doing a box operation, which copies the enumerator to a reference object on the heap, then on line 000c calling Reset on this boxed object. So m_Enumerator in the wrapper class is not modified by the call the Reset. And this is the only way to call the Reset method on this variable (without using reflection). Therefore, the only way that the collection enumerator struct can be used safely is to store them as a boxed IEnumerator<T>, and not use them as value types at all.

    Read the article

  • Zenoss Setup for Windows Servers

    - by Jay Fox
    Recently I was saddled with standing up Zenoss for our enterprise.  We're running about 1200 servers, so manually touching each box was not an option.  We use LANDesk for a lot of automated installs and patching - more about that later.The steps below may not necessarily have to be completed in this order - it's just the way I did it.STEP ONE:Setup a standard AD user.  We want to do this so there's minimal security exposure.  Call the account what ever you want "domain/zenoss" for our examples.***********************************************************STEP TWO:Make the following local groups accessible by your zenoss account.Distributed COM UsersPerformance Monitor UsersEvent Log Readers (which doesn't exist on pre-2008 machines)Here's the Powershell script I used to setup access to these local groups:# Created to add Active Directory account to local groups# Must be run from elevated prompt, with permissions on the remote machine(s).# Create txt file should contain the names of the machines that need the account added, one per line.# Script will process machines line by line.foreach($i in (gc c:\tmp\computers.txt)){# Add the user to the first group$objUser=[ADSI]("WinNT://domain/zenoss")$objGroup=[ADSI]("WinNT://$i/Distributed COM Users")$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)# Add the user to the second group$objUser=[ADSI]("WinNT://domain/zenoss")$objGroup=[ADSI]("WinNT://$i/Performance Monitor Users")$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)# Add the user to the third group - Group doesn't exist on < Server 2008#$objUser=[ADSI]("WinNT://domain/zenoss")#$objGroup=[ADSI]("WinNT://$i/Event Log Readers")#$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)}**********************************************************STEP THREE:Setup security on the machines namespace so our domain/zenoss account can access itThe default namespace for zenoss is:  root/cimv2Here's the Powershell script:#Grant account defined below (line 11) access to WMI Namespace#Has to be run as account with permissions on remote machinefunction get-sid{Param ($DSIdentity)$ID = new-object System.Security.Principal.NTAccount($DSIdentity)return $ID.Translate( [System.Security.Principal.SecurityIdentifier] ).toString()}$sid = get-sid "domain\zenoss"$SDDL = "A;;CCWP;;;$sid" $DCOMSDDL = "A;;CCDCRP;;;$sid"$computers = Get-Content "c:\tmp\computers.txt"foreach ($strcomputer in $computers){    $Reg = [WMIClass]"\\$strcomputer\root\default:StdRegProv"    $DCOM = $Reg.GetBinaryValue(2147483650,"software\microsoft\ole","MachineLaunchRestriction").uValue    $security = Get-WmiObject -ComputerName $strcomputer -Namespace root/cimv2 -Class __SystemSecurity    $converter = new-object system.management.ManagementClass Win32_SecurityDescriptorHelper    $binarySD = @($null)    $result = $security.PsBase.InvokeMethod("GetSD",$binarySD)    $outsddl = $converter.BinarySDToSDDL($binarySD[0])    $outDCOMSDDL = $converter.BinarySDToSDDL($DCOM)    $newSDDL = $outsddl.SDDL += "(" + $SDDL + ")"    $newDCOMSDDL = $outDCOMSDDL.SDDL += "(" + $DCOMSDDL + ")"    $WMIbinarySD = $converter.SDDLToBinarySD($newSDDL)    $WMIconvertedPermissions = ,$WMIbinarySD.BinarySD    $DCOMbinarySD = $converter.SDDLToBinarySD($newDCOMSDDL)    $DCOMconvertedPermissions = ,$DCOMbinarySD.BinarySD    $result = $security.PsBase.InvokeMethod("SetSD",$WMIconvertedPermissions)     $result = $Reg.SetBinaryValue(2147483650,"software\microsoft\ole","MachineLaunchRestriction", $DCOMbinarySD.binarySD)}***********************************************************STEP FOUR:Get the SID for our zenoss account.Powershell#Provide AD User get SID$objUser = New-Object System.Security.Principal.NTAccount("domain", "zenoss") $strSID = $objUser.Translate([System.Security.Principal.SecurityIdentifier]) $strSID.Value******************************************************************STEP FIVE:Modify the Service Control Manager to allow access to the zenoss AD account.This command can be run from an elevated command line, or through Powershellsc sdset scmanager "D:(A;;CC;;;AU)(A;;CCLCRPRC;;;IU)(A;;CCLCRPRC;;;SU)(A;;CCLCRPWPRC;;;SY)(A;;KA;;;BA)(A;;CCLCRPRC;;;PUT_YOUR_SID_HERE_FROM STEP_FOUR)S:(AU;FA;KA;;;WD)(AU;OIIOFA;GA;;;WD)"******************************************************************In step two the script plows through a txt file that processes each computer listed on each line.  For the other scripts I ran them on each machine using LANDesk.  You can probably edit those scripts to process a text file as well.That's what got me off the ground monitoring the machines using Zenoss.  Hopefully this is helpful for you.  Watch the line breaks when copy the scripts.

    Read the article

  • Can see samba shares but not access them

    - by nitefrog
    For the life of me I cannot figure this one out. I have samba installed and set up on the ubuntu box and on the Win7 box I CAN SEE all the shares I created. I created two users on ubuntu that map to the users in windows. On ubuntu they are both admins, user A & B on Windows User A is admin and user B is poweruser. User A can see both shares and access them, but user B can see everythin, but only access the homes directory, the other directory throws an error. I have two drives in Ubuntu and this is the smb.config file (I am new to samba): [global] workgroup = WORKGROUP server string = %h server (Samba, Ubuntu) wins support = no dns proxy = yes name resolve order = lmhosts host wins bcast log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ; usershare max shares = 100 usershare allow guests = yes And here is the share section: Both user A & B can access this from windows. No problems. [homes] comment = Home Directories browseable = no writable = yes Both User A & B can see this share, but only user A can access it. User B get an error thrown. [stuff] comment = Unixmen File Server path = /media/data/appinstall/ browseable = yes ;writable = no read only = yes hosts allow = The permission for the media/data/appinstall/ is as follows: appInstall properties: share name: stuff Allow others to create and delete files in this folder is cheeked Guest access (for people without a user account) is checked permissions: Owner: user A Folder Access: Create and delete files File Access: --- Group: user A Folder Access: Create and delete files File Access: --- Others Folder Access: Create and delete files File Access: --- I am at a loss and need to get this work. Any ideas? The goal is to have a setup like this. 3 users on window machines. Each user on the data drive will have their own personal folder where they are the ones that can only access, then another folder where 2 of the users will have read only and one user full access. I had this setup before on windows, but after what happened I am NEVER going back to windows, so Unix here I am to stay! I am really stuck. I am running Ubuntu 11. I could reformat again and put on version 10 if that would make life easier. I have been dealing with this since Wed. 3pm. Thanks.

    Read the article

  • Java: How to manage UDP client-server state

    - by user92947
    I am trying to write a Java application that works similar to MapReduce. There is a server and several workers. Workers may come and go as they please and the membership to the group has a soft-state. To become a part of the group, the worker must send a UDP datagram to the server, but to continue to be part of the group, the worker must send the UDP datagram to the server every 5 minutes. In order to accommodate temporary errors, a worker is allowed to miss as many as two consecutive periodic UDP datagrams. So, the server must keep track of the current set of workers as well as the last time each worker had sent a UDP datagram. I've implemented a class called WorkerListener that implements Runnable and listens to UDP datagrams on a particular UDP port. Now, to keep track of active workers, this class may maintain a HashSet (or HashMap). When a datagram is received, the server may query the HashSet to check if it is a new member. If so, it can add the new worker to the group by adding an entry into the HashSet. If not, it must reset a "timer" for the worker, noting that it has just heard from the corresponding worker. I'm using the word timer in a generic sense. It doesn't have to be a clock of sorts. Perhaps this could also be implemented using int or long variables. Also, the server must run a thread that continuously monitors the timers for the workers to see that a client that times out on two consecutive datagram intervals, it is removed from the HashSet. I don't want to do this in the WorkerListener thread because it would be blocking on the UDP datagram receive() function. If I create a separate thread to monitor the worker HashSet, it would need to be a different class, perhaps WorkerRegistrar. I must share the HashSet with that thread. Mutual exclusion must also be implemented, then. My question is, what is the best way to do this? Pointers to some sample implementation would be great. I want to use the barebones JDK implementation, and not some fancy state maintenance API that takes care of everything, because I want this to be a useful demonstration for a class that I am teaching. Thanks

    Read the article

  • C# Dev - I've tried Lisps, but I don't get it.

    - by Jonathan Mitchem
    After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

    Read the article

  • Wrong statistics in AUX_STATS$ might puzzle the optimizer

    - by Mike Dietrich
    We do recommend the creation of System Statistics for quite a long time. Since Oracle 9i the optimizer works with a CPU and IO cost based model. And in order to give the optimizer some knowledge about the IO subsystem's performance and throughput - once System Statistics are collected - they'll get stored in AUX_STATS$. For this purpose in the old Oracle 9i days some default values had been defined - and you'll still find those defaults in Oracle Database 11g Release 2 in AUX_STATS$. But these old values don't reflect the performance of modern IO systems. So it might be a good best practice post upgrade to create fresh System Statistics if you haven't done this before.  You can collect System Statistics with: exec DBMS_STATS.GATHER_SYSTEM_STATS('start'); and end it later by executing: exec DBMS_STATS.GATHER_SYSTEM_STATS('stop'); You could also run DBMS_STATS.GATHER_SYSTEM_STATS('interval', interval=>N) instead where N is the number of minutes when statistics gathering is stopped automatically. Please make sure you'll do this on a real workload period. It won't make sense to gather these values while the database is in an idle state. You should do this ideally for several hours. It doesn't affect performance in a negative way as the values are anyway collected in V$SYSSTAT and V$SESSTAT. And in case you'd like to delete the stats and revert to the old default values you'd simply execute:exec DBMS_STATS.DELETE_SYSTEM_STATS; The tricky thing in Oracle Database 11.2 - and that's why I'm actually writing this blog post today - is bug9842771. This leads to wrong values in AUX_STATS$ for SREADTIM and MREADTIM by factor 1000 guiding the optimizer sometimes into the totally wrong directon. The workaround is to overwrite these values manually and divide them by 1000. Use the DBMS_STATS.SET_SYSTEM_STATS procedure. See this MOS Note:9842771.8 for the above bug for some further information. This issue is fixed in Oracle Database 11.2.0.3 and above. To get some background information about the statistics collected in please read this section in the Oracle Database 11.2 Performance Tuning Guide. And gathering System Statistics might have some implication if you have mixed workloads - and interacts with DB_FILE_MULTIBLOCK_READ_COUNT. For more information please read section 13.4.1.2.

    Read the article

  • What algorithms can I use to detect if articles or posts are duplicates?

    - by michael
    I'm trying to detect if an article or forum post is a duplicate entry within the database. I've given this some thought, coming to the conclusion that someone who duplicate content will do so using one of the three (in descending difficult to detect): simple copy paste the whole text copy and paste parts of text merging it with their own copy an article from an external site and masquerade as their own Prepping Text For Analysis Basically any anomalies; the goal is to make the text as "pure" as possible. For more accurate results, the text is "standardized" by: Stripping duplicate white spaces and trimming leading and trailing. Newlines are standardized to \n. HTML tags are removed. Using a RegEx called Daring Fireball URLs are stripped. I use BB code in my application so that goes to. (ä)ccented and foreign (besides Enlgish) are converted to their non foreign form. I store information about each article in (1) statistics table and in (2) keywords table. (1) Statistics Table The following statistics are stored about the textual content (much like this post) text length letter count word count sentence count average words per sentence automated readability index gunning fog score For European languages Coleman-Liau and Automated Readability Index should be used as they do not use syllable counting, so should produce a reasonably accurate score. (2) Keywords Table The keywords are generated by excluding a huge list of stop words (common words), e.g., 'the', 'a', 'of', 'to', etc, etc. Sample Data text_length, 3963 letter_count, 3052 word_count, 684 sentence_count, 33 word_per_sentence, 21 gunning_fog, 11.5 auto_read_index, 9.9 keyword 1, killed keyword 2, officers keyword 3, police It should be noted that once an article gets updated all of the above statistics are regenerated and could be completely different values. How could I use the above information to detect if an article that's being published for the first time, is already existing within the database? I'm aware anything I'll design will not be perfect, the biggest risk being (1) Content that is not a duplicate will be flagged as duplicate (2) The system allows the duplicate content through. So the algorithm should generate a risk assessment number from 0 being no duplicate risk 5 being possible duplicate and 10 being duplicate. Anything above 5 then there's a good possibility that the content is duplicate. In this case the content could be flagged and linked to the article's that are possible duplicates and a human could decide whether to delete or allow. As I said before I'm storing keywords for the whole article, however I wonder if I could do the same on paragraph basis; this would also mean further separating my data in the DB but it would also make it easier for detecting (2) in my initial post. I'm thinking weighted average between the statistics, but in what order and what would be the consequences...

    Read the article

< Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >