Search Results

Search found 31774 results on 1271 pages for 'chris go'.

Page 637/1271 | < Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >

• Route an IP from WAN to a host on LAN on OpenWRT

  - by Zsub

  EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have recieved a /29 from our ISP. The first address is reserved for their endpoint, so I'm free to use five addresses. We run a local network, so of course there is a router in between running OpenWRT to provide all hosts with (W)LAN (dhcp from a private range). However, we also have a server running OS X Server 10.6 (Snow Leopard) and I'd like that server to be accessible both from the LAN using a private IP as well as from the WAN on it's own public IP. Point of note is that the server only has one network port, so multiple NICs is not an option, unfortunately. How would I go about doing this?

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• Run a local command after closing an SSH connection?

  - by James B

  I've set up my zsh to update the XTerm title whenever I change directories. It's neat! Unfortunately I have one common problem, which is this: % cd foo; # title changes to "host1:~/foo" % ssh host2; # title changes to "host2:~" % pwd /home/user/foo # title is still "host2:~" I need to run some command anytime an ssh connection terminates, either chpwd, or cd ., or something similar. I don't think I can use an alias, because I'd need something like alias ssh=ssh $*; cd . but AFAICT you can't pick where the arguments go in an alias.

  Read the article

• One quarter of screen corrupted on MacBook Pro

  - by danyal

  I have a problem with my MacBook Pro's screen - here's a video: http://yfrog.com/4wm63z For those who prefer words, if you divide the screen vertically into 4 columns, the second column is corrupted (flickering, and discoloured, usually with yellow). I took it to an Apple store and they said it could be the screen or the logic board, neither of which will be cheap to replace. However, occasionally this problem will completely go away. So before I part with my cash, or decide to turn this into an overpriced media center for my TV... could the problem be a loose cable, or something else cheaper to fix?

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

• Active DFS node did not restore after failure

  - by Mark Henderson

  On Tuesday we had a Server 2008 R2 DFS-R node go offline unexpectedly. DFS did the right thing and started routing requests to a different node, which was in a remote site. This is by design, because even though it's slow, at least it's still working. We had the local DFS-R node back online within an hour, and it had synced all its changes 10 minutes after that. 3 of the 5 terminal servers reset themselves to the local DFS node, but the other two stayed pointing at the remote DFS node for three days, until someone finally piped up about how slow requests were. What reasons could there be why some, but not all, of the server reverted? Is the currently active DFS node for a namespace exposed anywhere in the OS (WMI, or even scripts) so that we can monitor the active nodes?

  Read the article

• RHEL kickstart with external DVDrom drive

  - by AndyM

  HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

  Read the article

• Can't get PDO MySQL driver to work on PHP

  - by bart

  Trying to install Vanilla 2 locally using MAMP i got the error: "You must have the MySQL driver for PDO enabled in order for Vanilla to connect to your database". When I check phpinfo() I see: --with-pdo-mysql=shared,/Applications/MAMP/Library --with-pdo-pgsql=shared,/Applications/MAMP/Library/pg When I go and check out those paths I find the files: libpq.5.dylib libpq.dylib libpq.5.2.dylib When I check my php.ini file I see: ; Extensions extension=pdo_mysql.so In php.ini the path to the extension dir is correct (checked it manually): extension_dir = "/Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/" In this folder I find the file: pdo_mysql.so phpinfo() gives me two sections: PDO PDO drivers: sqlite, sqlite2 and pdo_sqlite SQLite Library: 3.6.22 So everything seems to be fine, but can't get the PDO MySQL driver working :(

  Read the article

• Video Hosting External or Internal?

  - by user69334

  I have a client who wants to offer videos for downloading or streaming on his website. Now we have hosting for him, which is wonderful: it's reliable and fast, offers unlimited space and databases BUT it only offers 10GB in bandwidth. The videos could easily be placed on his server (unlimited space) but the bandwidth is a real problem. Now I am wondering if he would purchase external hosting for his videos, and people would want to download them, woould this still eat up all his available bandwidth in no time, because the download request would go via his site, or is there a way to circumvent this?

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• something is downloading in background Linux

  - by wisdom

  My laptop boots normally to Linux -LinuxMint- and immediately I like to open gnome-system-monitor but the shock is that something is downloading(the problem has been out 2 days ago) and nothing I run yet ! I did iftop in terminal but nothing strange -a screen shot provided-, also I tried nethogs which showed nothing at all. The more complicated when I reboot and same problem is there so I can't browse/surf Internet, no one connected to my network can browse any more it's absorbing the stream horribly! After many reboots it will go to normal state(no background downloading). But really I can't figure out the problem going behind the scene ! Any suggestion,any help would be appreciated...thanks

  Read the article

• How to create a template with contact info in Windows Live Mail?

  - by Elliott

  Is it possible to create a template to use in Windows Live mail which I can load peoples details into from my contact list? I currently send emails to people but I have to manually view them in the address book, then copy there details into an email. What I would like is to open the template, select the email address and everything else is auto completed, such as first name, address etc. These would go in set fields which I set within the template. Is this possible? I am willing to switch to another mail account if needed but I would prefer it to be in Windows Live Mail. Thank you. :)

  Read the article

• IE and Chrome won't browse the internet on dial up but firefox will. How could I fix it?

  - by Kelbizzle

  First let me say I've done plenty of troubleshooting and will try to explain as clearly and as much as I can. Please bear with me. I have a client's computer who uses dial-up and Windows XP. The problem is when I connect to the dial up ISP. IE or Chrome will not browse the internet. It says page cannot be displayed. but if I use firefox on the dialup connection it works. Sounds simple enough there has got to be something wrong with the proxy settings or something...well, that's what I thought here is the weird part. When connected to the LAN in my office IE, Chrome, and FF all work. I upgraded to ie8 and the issue still happens. How would you go about troubleshooting this issue? What should I do next?

  Read the article

• Home Server restore fails cannot find boot device

  - by Tim Heuer

  I am using Windows Home Server to backup my PCs. I recently had a hard drive failure on one of my WHS connected PCs and obtained an identical sized/speed drive for my laptop. I used the latest home server restore CD and did the restore. It said it completed successfully. Upon reboot, it says 'cannot find boot device' and lists all my drives (hard drive, cd, network book) indicating no valid operating system was found. I boot using the Win7 repair disk and while it doesn't see the operating system, it sees the drive and if I go into a command prompt, I can see all my data on the drive. My laptop is Windows 7 64-bit Ultimate. I've tried most everything I can think of. I'm a technical user (software developer) so I'm pretty aware of how things work (or should). I don't feel like I'm missing a simple step here.

  Read the article

• Installed 4GB memory but Windows XP 32 bit only reporting 2GB?

  - by AnthonyWJones

  I've just taken an existing XP Pro 32 bit system that had only 0.5GB of memory installed and maxed it out to 4GB. The BIOS reports the 4GB ram however when XP is booted and I look at the computer properties only 2GB of RAM is reported. Can anyone explain this? Before we go up any blind allys the /3GB switch is not the answer here, I have no need for a single process to use more the 2GB of memory. I'm wondering if the the 32 bit XP Pro is deliberately limited to 2GB. I seem to remember seeing an excellent table on a Microsoft site listing all the various SKUs of Windows and what each one was limited to. However I can't seem to find that table now.

  Read the article

• Google Docs: Tie the Form with a Spreadsheet to email addresses and responses?

  - by Nick Gorbikoff

  Hello. I'm just trying to figure out if I'm doing something wrong or it's not possible. I created a small form ( I'm trying to get current mailing addresses from my friends and relatives - since I lost my address book) and it ties to a Google Spreadsheet. I sent out a sample to my work address - filled out a form and saved it. However when I go to see the responses - in a spreadsheet - it has a time stamp but it has no email associated with a response - so I don't know who made it ( well in this case I know it's me - but when you have 100 replies?) I understand - it may be great for anonymous surveys - but in this case I'd like to know who responded with what - and I don't wan to make them fill out Email and First Name & Last Name - I already have this information. Any suggestions?

  Read the article

• Multiple servers acting like a single one with all the hardware?

  - by marc.riera

  Hello, by now I have 10 servers for hpc, power computing oriented. My users need to launch several processes using qmake. The users are used to work with ubuntu 9.10, and the software from the repositories is switable for them. I've deployed ubuntu 9.10 to all 10 servers (pxe rocks). By now we work with parallel-ssh and cluster-ssh, which allows as to launch the same process to all servers. With this tools this tools the servers remain as independent but with the same software and the same launched command. Now we would like to go to next step and see all the servers as a single one with all the resources from the other 9 as if was its resources. The difference would be substantial in time to process and also time to design the command to launch. Any advice on wich software to use will be very useful? Thanks

  Read the article

• Disable spell checking in Internet Explorer 10 (Windows 8)

  - by Lumi

  I installed the release preview of Windows 8, which comes with Internet Explorer 10. IE10 has been endowed with a spell checking Feature, which is active while I write this text. As a matter of principle, I disable spell checking anywhere I go. I simply hate spell checking. I know better than the spell checker. (And when not it doesn't matter.) This is all the more annoying as I write in several languages and the spell checker only does one language (German, in this case), and then even in the new and wrong spelling, not in the old an true one. How can I disable this?

  Read the article

• How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

  - by CT

  I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

  Read the article

• USB Adapter for Memory Cards

  - by ktm5124

  I am looking for something like a USB adapter for video cards. It is a cable that on one end hooks into a USB port on a computer and on the other accepts any one of a variety of video cards. Essentially it's an "all-in-one" USB adapter for video cards. I'm told that they are sold all over... does anyone know what it is called or where to find them? I should clarify, by the way, that by "video card" I mean a memory card for a video camera, and that the goal is to read this video data onto a computer, from a variety of video card types, through a USB port. That way if you go to your friend's house and bring your computer, you can transfer the video data on his video camera to your computer, trusting that the adapter will have a slot for his kind of video card.

  Read the article

• Can I change a MySQL table back and forth between InnoDB and MyISAM without any problems?

  - by Daniel Magliola

  I have a site with a decently big database, 3Gb in size, a couple of tables with a dozen million records. It's currently 100% on MyISAM, and I have the feeling that the server is going slower than it should because of too much locking, so I'd like to try going to InnoDB and see if that makes things better. However, I need to do that directly in production, because obviously without load this doesn't make any difference. However, I'm a bit worried about this, because InnoDB actually has potential to be slower, so the question is: If I convert all tables to InnoDB and it turns out i'm worse off than before, can I go back to MyISAM without losing anything? Can you think of any problems I might encounter? (For example, I know that InnoDB stores all data in ONE big file that only gets bigger, can this be a problem?) Thank you very much Daniel

  Read the article

• 27 days after domain transfer name servers not propogated

  - by Thom Seddon

  We recently bought the domain: embarrassingnightclubphotos.com 7 days after accepting the transfer the domain finally transferred to our registrar and we immediately changed the name servers from ns*.netregistry.net to amy.ns.cloudflare.com and cody.ns.cloudflare.com 20 days after changing the name servers, the majority of tests show that both old and new nameservers are still being reported: http://intodns.com/embarrassingnightclubphotos.com http://www.whatsmydns.net/#NS/embarrassingnightclubphotos.com We are now ready to launch the new site but this issue is plagueing us as a high proportion of the traffic is still receiving the old nameserves and so hitting the old server. You can tell if you have hit the old or new server as the old server has the value "A" for the meta tag "Location" and the new server has "U". (The old server just has an iframe too!) I have never had this problem before - who is causing this and how should we go about reaching a resolution? Thanks

  Read the article

• Deliver email to Gmail AND Office 365?

  - by gbegley

  We moved our Office app hosting from Google Apps to Office 365. Many of us miss Google Apps, especially its superior search functionality. The pressure to use Office 365 has disappeared; many (but not all) of us would like to go back to Google Apps. Is it possible to configure our domain's mail delivery so that messages are delivered to both Google Apps's Gmail and Office 365, allowing users to choose which platform they prefer? If so, what are the options? Google Apps documentation specifies the ability to deliver messages to a secondary mail server using routing configuration. Currently our MX records are point to Office 365. If I change the MX records to point to Google Apps Mails servers, is the "Office 365 MX record address" the address I would want to use for a Google Apps Routing Target?

  Read the article

• Wake up and record in Windows Media Center on a Mac Mini

  - by Sir Code-A-Lot

  I'm currently considering buying a Mac Mini to use as a media center. I plan to install Windows 7 (or 8) on it, using Boot Camp. Will it be able to go into standby or hibernate (S3, S4?) and wake up to record TV scheduled in Windows Media Center? I haven't been able to find concrete information on supported standby types when running Windows under boot camp, and if Windows will even be able to wake when a recording should start. I just want to be clear on any limitations in this area before I buy anything.

  Read the article

• Count total file size of many files in Windows

  - by user105249

  When I want to burn a CD R with lots of files, I have to make sure the total file size in my folder doesn't exceed the capacity of the disc (680MB). In Windows are there possibilities to check the total file size of a bunch of files. I put them in a folder, right-click and check the properties. But this is an annoying trial and error kind of way. Either there are too many files in the folder, or too little. I watch the file size go up as I keep selecting more files, using ALT+going down button. No. 2 is my favorite way to do it. Here's my question: For some reason Windows (I still use XP) only shows the total file size of 100 selected files. When you select more than 100 files, no file size information appears any more. Is there way, a trick, an app, to work around this problem?

  Read the article

< Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >