Search Results

Search found 2565 results on 103 pages for 'sys'.

Page 64/103 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• How do I add color syntax highlighting to GNU emacs?

  - by Alex Reynolds

  I have two versions of emacs available to me on a locked workstation: $ /usr/local/bin/emacs --version GNU Emacs 22.3.1 $ /usr/bin/emacs --version GNU Emacs 21.4.1 In both cases, my terminal type is xterm when I run either version of emacs. When I run the v21 version of emacs, I get syntax coloring for Perl, HTML, and other modes. When I run the v22 version, I do not get syntax coloring. I would like to migrate from the v21 version because the combination of v21 emacs, GNOME Terminal and GNU Screen is eating Ctrl-arrow key chords, which prevents me from moving quickly between words. (OS X Terminal and GNU Screen do not have this issue.) The v22 version allows use of Ctrl-arrow key combinations with GNOME Terminal and GNU Screen. How do I fix the v22 version (or ask my sys admin to fix) so that it once again highlights syntax and allows me to use Ctrl-arrow key combinations?

  Read the article

• Robocopy hiding folders on backup drives

  - by Neil Barnwell

  I have a backup batch file that uses Robocopy to backup my files: robocopy "C:\" "G:\Default\RoboCopyBackup\C" /XF Pagefile.sys /XD "System Volume Information" "Recycler" "Temporary Internet Files" "Installer Cache" "Temp" /E /R:1 /W:0 /TEE /XJ This should create a folder structure on the external backup drive like so: G:\Default\RoboCopyBackup\C\... However, G: appears totally empty. What is weird, is that the folders and files are there! If I type the above path into the address bar, I see all the files and folders! Can anyone help me work out why? I think it might be some NTFS-based ownership/permissions thing but I'm not sure.

  Read the article

• Vista won't boot - just get black screen

  - by DisgruntledGoat

  When I boot into Windows Vista (Ultimate), I just get a black screen (with the mouse visible and working). If I run in safe mode, it seems to pause for a while when loading crcdisk.sys. A lot of research says it could be a problem with the hard drive, but I dual boot Ubuntu and that works fine and I can still see and use the Windows partition absolutely fine from Ubuntu. I tried using the "startup repair" option on the Vista install disk but it didn't detect any problems. I have run chkdsk several times, with this: chkdsk C: /f /r And also drive D (the recycle bin). The first two times it detected and fixed errors on the C drive but now it doesn't detect any errors. Is there anything else that could be causing this problem?

  Read the article

• OpenVPN to connect remote networks, peer to peer instead of client/server possible?

  - by John Robertson

  I would like to connect two remote networks using OpenVPN. I am very new to this we are very small and don't have a sys/network admin. What are the possible setups to have both networks both live on a common LAN via OpenVPN? I would prefer to use the UDP peer model rather than client/server. Is there a way to set that up instead? I can't see how because no computer on existing network A has a routable address to any computer on existing network B and vice versa.

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Robocopy hiding folders on backup drives

  - by Neil Barnwell

  I have a backup batch file that uses Robocopy to backup my files: robocopy "C:\" "G:\Default\RoboCopyBackup\C" /XF Pagefile.sys /XD "System Volume Information" "Recycler" "Temporary Internet Files" "Installer Cache" "Temp" /E /R:1 /W:0 /TEE /XJ This should create a folder structure on the external backup drive like so: G:\Default\RoboCopyBackup\C\... However, G: appears totally empty. What is weird, is that the folders and files are there! If I type the above path into the address bar, I see all the files and folders! Can anyone help me work out why? I think it might be some NTFS-based ownership/permissions thing but I'm not sure.

  Read the article

• Issues with FTP on my server

  - by homestead

  I installed FTP on my windows 2003 box I created a FTP site on a ipaddress, I am not allowing anonymous access. I created a user that has access to the folder c:\ftptest connecting to my server using filezilla shows: connectiong to -0.0.0.0 connection established, waiting for welcome message could not connect to server I tried both active and passive modes. The port on the server is open i.e. TCP 21 I can connect to other FTP sites so my locla firewall isnt' the issue. (now I know why sys admin work is so fun!)

  Read the article

• Windows 8 Unable to perform hibernate

  - by Jones

  Windows 8 Enterprise edition x86. Already enabled hibernate option, to have it on shutdown menu (start menu?) and set to hibernate on lid closing. However it's not hibernating for me. When I'm trying to sleep, it's sleep fine and wake up like a kid. But when I'm demanding hibernate, it disconnects internet, turn off screen and be back to lock screen in one second. Steps I've tried. Complete shutdown Clear hiberfile.sys by disabling and enabling back Resetting my power settings. Causes I suspect: Had dual boot with BackTrack with Windows 8 GUI boot manager. It was fine until I reinstall BackTrack, bootmgr resetted and I'm in Ubuntu boot menu;. Using additional hard disk through USB cable.(But it's not a problem before few days, however) How to make my system to hibernate and wakeup again.

  Read the article

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• Why does my computer show a black screen when booting into Windows Vista?

  - by dassouki

  Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

  Read the article

• No free disk space ;[

  - by skomak

  Hi I have weird situation because Linux df command says that there is no free disk space [root@backup cache]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 72G 70G 0 100% / /dev/sda1 190M 11M 170M 7% /boot tmpfs 248M 0 248M 0% /dev/shm but du -sh /* says [root@backup cache]# du -sh /* 4.0K /bacula-restores 7.4M /bin 5.4M /boot 3.6T /data 116K /dev 55M /etc 204K /home 76M /lib 16K /lost+found 12K /media 0 /misc 16K /mnt 8.0K /mount 0 /net 8.0K /opt 0 /proc 2.3G /root 32M /sbin 8.0K /selinux 168K /share 8.0K /srv 0 /sys 361M /test 20K /tmp 3.2G /usr 1.5G /var Could you tell me where is a problem? Where is my space? I can't figure it out :(

  Read the article

• VMware Workstation on Linux: Dropping core files in a shared folder...

  - by kclittle

  I'm using VMware 6.0.2 on a RHEL 4.6 host. The VMs are MontaVista CGE 5.0 (2.6.21 kernel). I'm trying to get applications running in the VMs to drop any core files on a HGFS volume, i.e. in a "shared folder". The core files get created as per the path and format given in /proc/sys/kernel/core_pattern, but they are always zero length. If I change the path to a local path (on a virtual disk in the VM), all is well. Any ideas what I have to do get the core files written into a shared folder? Thanks for your help!

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Laptop windows 7 power settings - screen display goes black after 1 minute

  - by Puneet Dudeja

  My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

  Read the article

• Security when, ssh Private keys are lost

  - by Shree Mandadi

  Cant explain my problem enough with words, Let me take an example.. and please multiple the complexity by a 100 for the Solution. User-A has two ssh private keys, and over time has used this public key on a number of servers He lost one of them, and has created a new pair. How does User-A, inform me (Sys Admin), that he has lost his key, and How do I manage all the servers to which he had access to (I do not have a list, of all Servers that User-A has access to). In other words, How do I recall, the public key associated with this Private key. REF: In the LDAP based Authentication, All Servers would communicate with a single Server repository for Authentication, and If I remove acess or modify the password on the Server, all Systems that use this LDAP for Authentication are secured, when User-A loses his password..

  Read the article

• IPTables reroute traffic not working

  - by user1307079

  I am trying to reroute incoming traffic on my server's port 80 to another server, but it is not working. This is what I tried. On the host server, I ran these: echo “1? > /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 38.105.20.226:80 iptables -t nat -A POSTROUTING -j MASQUERADE The server I want it to redirect to is 38.105.20.226:80, but when I go to the webserver that is on the main server, instead of showing the content of the web server on 38.105.20.226:80, it just doesn't load. I am on CentOS.

  Read the article

• Can installing URL Rewrite 2.0 on production IIS 7.5 have a negative impact?

  - by Olaf

  We have a Windows 2008 R2 server with IIS 7.5 and a lot of customer websites. Being no sys-admin but a developer, I hate to touch that wonderfully running system. However, I'd like to update the IIS plugin URL Rewrite to version 2.0 via Web Platform Installer. I do not want to do anything that might compromise the server, hence the question: can I expect it to work with at least a 99% chance? I did not find any bug reports or reviews on the web, so I'd like to hear an expert on that.

  Read the article

• How do i restart my linux server in every 2 days via crontab?

  - by Barkat Ullah

  I have a Linux server containing the os version below: Linux 2.6.32-220.7.1.el6.x86_64 I want to restart it in every 2 days, please help me, I want to do it via crontab. Another help, I used a code below to drop my memory caches in every hour. 0 * * * * /root/clearcache.sh #!/bin/sh sync; echo 3 > /proc/sys/vm/drop_caches But 1st 15 in every hour my server remain so slow after cleaning the caches. My sites do not load during every hour in 1st 15 minutes. In another way if I restart my server then also caches are removed. So I decided to restart my server in every 2 days to drop my caches. Will it be helpful to restart? Or is there any other way to drop my memory caches that will not down my server?

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

  - by Ben Walker

  playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

  Read the article

• Clear / Flush cached memory

  - by TheDave

  I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

  Read the article

• No command window.

  - by Segref

  Using 7 build 7600. Wen I try to open a command window, I just get returned to my previous folder/desktop. If I try to open an extended window I get to the UAC, answer yes and again am returned. A check in Sys info reveals the command prompt is running but I can't see the window. I can have multiple instances of cmd.exe running but still no window. My video adapter is GeForce 7600 and I have no other known problems at this time. Thanks in advance.

  Read the article

• How to stop OS X from switching input method (keyboard layout) automatically?

  - by adolf garlic

  After using the wireless keyboard that comes with the iMac, I have switched to a MS Ergo Natural 4000 one. Surprisingly I had to install extra software as OS X could not work out which keyboard I had. After which I went into sys prefs and set the main input method to be "British - Microsoft" first and "Swiss German" second (what the wireless keyboard is), on the "input sources" tab: However... OS X keeps resetting my input method back to Swiss German which is driving me bananas. I have the flag thingy top right so I can see when this changes. N.B. I have "input source options" set to "use the same one in all documents" which I am assuming means keep the language the same for anything running. It also flips back on the login page. Does anyone know how to fix this?

  Read the article

• IIS 6 on x64 and long URLs

  - by mausch

  I have a very long URL on a site hosted on Windows 2003 x64 that looks like this: http://myhost/a_very_very_long_url_around_300_chars_long (i.e. a single, very long segment around 300 chars long) Problem is, I'm getting a 400 Bad Request response from HTTP.SYS (it doesn't even reach IIS). I can tell because these requests show up in system32\LogFiles\HTTPERR, e.g: 2009-09-17 19:51:29 200.123.179.9 3636 192.168.129.50 80 HTTP/1.1 GET /a_very_very_long_url_around_300_chars_long 400 - URL - I tried setting UrlSegmentMaxLength in the registry and this fixes the issue on my Windows 2003 x86 box but not on the x64 production server. I tried this on another Win2k3 x64 server and it also failed. Any hints?

  Read the article

• Is it possible to make Ctrl+C as responsive as Ctrl+Break in the Windows 7 console?

  - by Peter Graham

  Is it possible to make Ctrl+C act like Ctrl+Break in the Windows 7 cmd.exe console? By default Ctrl+C seems to only send a signal the next time the input buffer is read, where Ctrl+Break sends a signal immediately. This makes Ctrl+C useless for ending processes because when I want to end a process I want to end it immediately. I'm using Ctrl+Break for now but it's far harder to type. It looks like in DOS you can add BREAK=ON to CONFIG.SYS to achieve this, but not in Windows 7?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >