Search Results

Search found 18993 results on 760 pages for 'context info'.

Page 641/760 | < Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >

• Indexing/Performance strategies for vast amount of the same value

  - by DrColossos

  Base information: This is in context to the indexing process of OpenStreetMap data. To simplify the question: the core information is divided into 3 main types with value "W", "R", "N" (VARCHAR(1)). The table has somewhere around ~75M rows, all columns with "W" make up ~42M rows. Existing indexes are not relevant to this question. Now the question itself: The indexing of the data is done via an procedure. Inside this procedure, there are some loops that do the following: [...] SELECT * FROM table WHERE the_key = "W"; [...] The results get looped again and the above query itself is also in a loop. This takes a lot of time and slows down the process massivly. An indexon the_key is obviously useless since all the values that the index might use are the same ("W"). The script itself is running with a speed that is OK, only the SELECTing takes very long. Do I need to create a "special" kind of index that takes this into account and makes the SELECT quicker? If so, which one? need to tune some of the server parameters (they are already tuned and the result that they deliver seem to be good. If needed, I can post them)? have to live with the speed and simply get more hardware to gain more power (Tim Taylor grunt grunt)? Any alternatives to the above points (except rewriting it or not using it)?

  Read the article

• PHP Array saved to Text file

  - by coffeemonitor

  I've saved a response from an outside server to a text file, so I don't need to keep running connection requests. Instead, perhaps I can use the text file for my manipulation purposes, until I'm read for re-connecting again. (also, my connection requests are limited to this outside server) Here is what I've saved to a text file: records.txt Array ( [0] => stdClass Object ( [id] => 552 [date_created] => 2012-02-23 10:30:56 [date_modified] => 2012-03-09 18:55:26 [date_deleted] => 2012-03-09 18:55:26 [first_name] => Test [middle_name] => [last_name] => Test [home_phone] => (123) 123-1234 [email] => [email protected] ) [1] => stdClass Object ( [id] => 553 [date_created] => 2012-02-23 10:30:56 [date_modified] => 2012-03-09 18:55:26 [date_deleted] => 2012-03-09 18:55:26 [first_name] => Test [middle_name] => [last_name] => Test [home_phone] => (325) 558-1234 [email] => [email protected] ) ) There's actually more in the Array, but I'm sure 2 are fine. Since this is a text file, and I want to pretend this is the actual outside server (sending me the same info), how do I make it a real array again? I know I need to open the file first: <?php $fp = fopen('records.txt', "r"); // open the file $theData = fread($fh, filesize('records.txt')); fclose($fh); echo $theData; ?> So far $theData is a string value. Is there a way to convert it back to the Array it originally came in as?

  Read the article

• Behavior of Struts2 and convention-plugin when there is Index(extends ActionSupport)

  - by hanishi

  We have an Action class named 'Index' immediately under com.example.common.action and is annotated @ParentPackage('default') which is declared in package directive in struts.xml and has "/" for its namespace and extends "struts-default". It also declares @Result so that it responses with jsp files corresponding the string values returned by its execute() method. In our struts.xml, the following struts setting is configured along with other necessary configurations that are needed for convention-plugin. <constant name="struts.action.extension" value=","/> When accessing /my_context/none_existing_path, the request apparently hits this Index class and the contents of the jsp declared in the Index's @Result section gets returned. However, if we provide /my_context/, we receive the following error: HTTP Status 404-There is no Action mapped for namespace[/] and action name [] associated with context path [/my_context]. We want to know the reason why accessing /my_context/none_existing_path, where none_existing_path has no matching action, can fallback to Index class, but error is returned when when the URL requested is just /my_context/. Currently, our convention-plugin settings are declared as follows: <constant name="struts.convention.package.locators.basePackage" value="com.example"/> <constant name="struts.convention.package.locators" value="action"/> Strangely, if we changed the value of the struts.convention.package.locators.basePackage to om.example.common, in which the aforementioned Index file can be immediately found by narrowing the search scope, requesting /my_context/ displays the content of the jsps declared in @Result section of the Index class. However, as our action classes are distributed throughout the com.example.[a-z].action packages, where [a-z] represents the large volume of directories we have in our package structure, we cannot use this trick as a workaround. We have also tried placing index.jsp at the top level of the class path, and have the index.jsp redirect to /my_context/index, which worked but not what we want. Could this be a bug? We appreciate your responses. Thank you in advance. EDIT: JIRA registered, problem solved (from Struts 2.3.12 up)

  Read the article

• Multiple left joins, how to output in php

  - by Dan

  I have 3 tables I need to join. The contracts table is the main table, the 'jobs' and 'companies' table are extra info that can be associated to the contracts table. so, since I want all entries from my 'contracts' table, and the 'jobs' and 'companies' data only if it exists, I wrote the query like this.... $sql = "SELECT * FROM contracts LEFT JOIN jobs ON contracts.job_id = jobs.id LEFT JOIN companies ON contracts.company_id = companies.id ORDER BY contracts.end_date"; Now how would I output this in PHP? I tried this but kept getting an undefined error "Notice: Undefined index: contracts.id"... $sql_result = mysql_query($sql,$connection) or die ("Fail."); if(mysql_num_rows($sql_result) > 0){ while($row = mysql_fetch_array($sql_result)) { $contract_id = stripslashes($row['contracts.id']); $job_number = stripslashes($row['jobs.job_number']); $company_name = stripslashes($row['companies.name']); ?> <tr id="<?=$contract_id?>"> <td><?=$job_number?></td> <td><?=$company_name?></td> </tr> <? } }else{ echo "No records found"; } Any help is appreciated.

  Read the article

• Visual Studio: Collapse Methods, but not Comments (Summary etc.)

  - by Alex

  Hello, is there a way (settings? "macro"? extension?) that I can simply toggle outlining so that only the using section and my methods collapse to their signature line, but my comments (summary and double slash comments) and classes stay expanded? Examples: 1) Uncollapsed using System; using MachineGun; namespace Animals { /// <summary> /// Angry animal /// Pretty Fast, too /// </summary> public partial class Lion { // // Dead or Alive public Boolean Alive; /// <summary> /// Bad bite /// </summary> public PieceOfAnimal Bite(Animal animalToBite) { return animalToBite.Shoulder; } /// <summary> /// Fatal bite /// </summary> public PieceOfAnimal Kill(Animal animalToKill) { return animalToKill.Head; } } } 2) Collapsed (the following is my desired result): using[...] namespace Animals { /// <summary> /// Angry animal /// Pretty Fast, too /// </summary> public partial class Lion { // // Dead or Alive public Boolean Alive; /// <summary> /// Bad bite /// </summary> public PieceOfAnimal Bite(Animal animalToBite)[...] /// <summary> /// Fatal bite /// </summary> public PieceOfAnimal Kill(Animal animalToKill)[...] } } This is how I prefer seeing my class files (the collapsed form). I've been doing the collapsing by hand a million times by now and I think there should be a way to automate/customize/extend VS to do it the way I want? Every time I debug/hit a breakpoint, it uncollapses and messes up things. If I collapse via the context menu's collapse to outline etc. it also collapses my comments which isn't desired. Appreciate your help!

  Read the article

• Using deprecated binders and C++0x lambdas

  - by Sumant

  C++0x has deprecated the use of old binders such as bind1st and bind2nd in favor of generic std::bind. C++0x lambdas bind nicely with std::bind but they don't bind with classic bind1st and bind2nd because by default lambdas don't have nested typedefs such as argument_type, first_argument_type, second_argument_type, and result_type. So I thought std::function can serve as a standard way to bind lambdas to the old binders because it exposes the necessary typedefs. However, using std::function is hard to use in this context because it forces you to spell out the function-type while instantiating it. auto bound = std::bind1st(std::function<int (int, int)>([](int i, int j){ return i < j; }), 10); // hard to use auto bound = std::bind1st(std::make_function([](int i, int j){ return i < j; }), 10); // nice to have but does not compile. I could not find a convenient object generator for std::function. Something like std::make_fuction would be nice to have. Does such a thing exist? If not, is there any other better way of binding lamdas to the classic binders?

  Read the article

• How do I change the viewport of a window in win32?

  - by Colen

  Hi, I have a window with child windows inside in it. The child windows take up about 1000 pixels of vertical space. However, our users don't always have 1000 pixels of vertical space available - they might have as little as 500 or 600 pixels. I want to be able to display this window at a size of 500 pixels high, and have the user "scroll" up and down the window to see the full contents. The window should always be 500 pixels high, but the view within it should change. Assume I can add a scroll bar somewhere so the user can choose which part of the window he wants to see. Windows will normally paint the window contents from height 0 to height 500; how do I tell it instead to "paint from height 250 to height 750", for example? I know that I can set the viewport with functions like SetViewportOrgEx etc, but those functions require a device context - when do I call them if I want them to be "permanent"? Do I call them when I get the WM_PAINT message from windows? Or at some other time? And which functions from that family do I want to use? Thanks.

  Read the article

• Concrete examples of state sharing between multiple viewmodels (WPF MVVM)

  - by JohnMetta

  I have a WPF/Entity Framework (4.0) project with many objects. I'd like to build the application so that that I can have object selection state shared across viewmodels. For Example: We have Cars, Drivers, Passengers, and Cargo classes. We also have UserControls for CarList, DriverList, etc. and editor windows for CarEditor, DriverEditor, etc. Furthermore, we have viewmodels for all of these (CarListViewModel, DriverListViewModel, CargoEditorViewModel, etc). This all composes a dockable interface where the user can have multiple object lists, editors, and viewers open. What I want is a concrete code example of how to wireup multiple viewmodels so that selecting a car in the CarList will cause that car to go live in the CarEditorView, but also be selected in any other view for which the context is valid (such as a DriverByCarView- or just DriverList if there is a filter predicate). There are a number of suggestions and discussions based on this question. The two methods that seem to dominate are: 3018307: Discusses state sharing by mentioning a messaging subsystem 1159035: Discusses state sharing by using an enclosing viewmodel Is one of these approaches better than the other? Does anyone have a concrete example of either/both of these methods in the form of a write-up or small code project? I'm still learning WPF, so pointers to entry points for reading API fundamentals are appreciated, but looking at code examples is where I usually go. Thanks In case anyone is interested, here are some other similar discussions: 3816961: Discusses returning multiple viewmodels depending on object type (i.e. a collection of arbitrary types adhering to a specific interface) 1928130: Discusses whether it is a good idea to aggregate viewmodels as properties of other viewmodels (e.g. a MainWindow viewmodel composed of panel viewmodels) 1120061: Essentially discusses whether to have use a viewmodel-per-model strategy or a viewmodel-per-view-element strategy. 4244222: Discusses whether or not to nest the viewmodels when using a nested object hierarchy. 4429708: Discusses sharing collections between viewmodels directly, but doesn't go into detail. List item: Discusses managing multiple selections within a single viewmodel.

  Read the article

• Strange results while measuring delta time on Linux

  - by pachanga

  Folks, could you please explain why I'm getting very strange results from time to time using the the following code: #include <unistd.h> #include <sys/time.h> #include <time.h> #include <stdio.h> int main() { struct timeval start, end; long mtime, seconds, useconds; while(1) { gettimeofday(&start, NULL); usleep(2000); gettimeofday(&end, NULL); seconds = end.tv_sec - start.tv_sec; useconds = end.tv_usec - start.tv_usec; mtime = ((seconds) * 1000 + useconds/1000.0) + 0.5; if(mtime > 10) printf("WTF: %ld\n", mtime); } return 0; } (You can compile and run it with: gcc test.c -o out -lrt && ./out) What I'm experiencing is sporadic big values of mtime variable almost every second or even more often, e.g: $ gcc test.c -o out -lrt && ./out WTF: 14 WTF: 11 WTF: 11 WTF: 11 WTF: 14 WTF: 13 WTF: 13 WTF: 11 WTF: 16 How can this be possible? Is it OS to blame? Does it do too much context switching? But my box is idle( load average: 0.02, 0.02, 0.3). Here is my Linux kernel version: $ uname -a Linux kurluka 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux

  Read the article

• Named pipe stalls threads?

  - by entens

  I am attempting to push updates into a process via a named pipe, but in doing so my process loop now seams to stall on while ((line = sr.ReadLine()) != null). I'm a little mystified as to what might be wrong as this is my first foray into named pipes. void RefreshThread() { using (NamedPipeServerStream pipeStream = new NamedPipeServerStream("processPipe", PipeDirection.In)) { pipeStream.WaitForConnection(); using (StreamReader sr = new StreamReader(pipeStream)) { for (; ; ) { if (StopThread == true) { StopThread = false; return; // exit loop and terminate the thread } // push update for heartbeat int HeartbeatHandle = ItemDictionary["Info.Heartbeat"]; int HeartbeatValue = (int)Config.Items[HeartbeatHandle].Value; Config.Items[HeartbeatHandle].Value = ++HeartbeatValue; SetItemValue(HeartbeatHandle, HeartbeatValue, (short)0xC0, DateTime.Now); string line = null; while ((line = sr.ReadLine()) != null) { // line is in the format: item, value, timestamp string[] parts = line.Split(','); // push update and store value in item cache int handle = ItemDictionary[parts[0]]; object value = parts[1]; Config.Items[handle].Value = int.Parse(value); DateTime timestamp = DateTime.FromBinary(long.Parse(parts[2])); SetItemValue(handle, value, (short)0xC0, timestamp); } Thread.Sleep(500); } } } }

  Read the article

• Advice: Python Framework Server/Worker Queue management (not Website)

  - by Muppet Geoff

  I am looking for some advice/opinions of which Python Framework to use in an implementation of multiple 'Worker' PCs co-ordinated from a central Queue Manager. For completeness, the 'Worker' PCs will be running Audio Conversion routines (which I do not need advice on, and have standalone code that works). The Audio conversion takes a long time, and I need to co-ordinate an arbitrary number of the 'Workers' from a central location, handing them conversion tasks (such as where to get the source files, or where to ask for the job configuration) with them reporting back some additional info, such as the runtime of the converted audio etc. At present, I have a script that makes a webservice call to get the 'configuration' for a conversion task, based on source files located on the worker already (we manually copy the source files to the worker, and that triggers a conversion routine). I want to change this, so that we can distribute conversion tasks ("Oy you, process this: xxx") based on availability, and in an ideal world, based on pending tasks too. There is a chance that Workers can go offline mid-conversion (but this is not likely). All the workers are Windows based, the co-ordinator can be WIndows or Linux. I have (in my initial searches) come across the following - and I know that some are cross-dependent: Celery (with RabbitMQ) Twisted Django Using a framework, rather than home-brewing, seems to make more sense to me right now. I have a limited timeframe in which to develop this functional extension. An additional consideration would be using a Framework that is compatible with PyQT/PySide so that I can write a simple UI to display Queue status etc. I appreciate that the specifics above are a little vague, and I hope that someone can offer me a pointer or two. Again: I am looking for general advice on which Python framework to investigate further, for developing a Server/Worker 'Queue management' solution, for non-web activities (this is why DJango didn't seem the right fit).

  Read the article

• How do I cover unintuitive code blocks?

  - by naivedeveloper

  For some reason, I'm having a hard time trying to cover the block of code below. This code is an excerpt from the UNIX uniq command. I'm trying to write test cases to cover all blocks, but can't seem to reach this block: if (nfiles == 2) { // Generic error routine } In context: int main (int argc, char **argv) { int optc = 0; bool posixly_correct = (getenv ("POSIXLY_CORRECT") != NULL); int nfiles = 0; char const *file[2]; file[0] = file[1] = "-"; program_name = argv[0]; skip_chars = 0; skip_fields = 0; check_chars = SIZE_MAX; for (;;) { /* Parse an operand with leading "+" as a file after "--" was seen; or if pedantic and a file was seen; or if not obsolete. */ if (optc == -1 || (posixly_correct && nfiles != 0) || ((optc = getopt_long (argc, argv, "-0123456789Dcdf:is:uw:", longopts, NULL)) == -1)) { if (optind == argc) break; if (nfiles == 2) { // Handle errors } file[nfiles++] = argv[optind++]; } else switch (optc) { case 1: { unsigned long int size; if (optarg[0] == '+' && posix2_version () < 200112 && xstrtoul (optarg, NULL, 10, &size, "") == LONGINT_OK && size <= SIZE_MAX) skip_chars = size; else if (nfiles == 2) { // Handle error } else file[nfiles++] = optarg; } break; } } } Any help would be greatly appreciated. Thanks.

  Read the article

• Etiquette: Version bump my fork of opensource project?

  - by Ross

  This question is about etiquette and open source projects. I have forked an application from github and added two new features. The first feature has been request frequently elsewhere. I have added it. Code & implementation are clean (I think). The second feature is more of a hack. It will be of use to others, but the implementation is a little dirty in useage and more so in code. I need the feature but I don't have the skills to fully implement it properly or to a level that could be considered a worth while contrabution to the main project. How should the versioning work? Do I just bump up my version numbers care-free and push to my master branch? It is annoying to know which version is running, modifed or original, as both have the same version number. But will it be confusing when, months later, my github page has a version number the same as the original but both are actually completely different. (I have made pull requests etc. but that is not the context of my question.) The project I have forked uses ruby jeweler so has a versioning format of: Jeweler tracks the version of your project. It assumes you will be using a version in the format x.y.z. x is the 'major' version, y is the 'minor' version, and z is the patch version. Is this standard for other projects/langauges too? Are my changes patches? Thanks

  Read the article

• A public struct inside a class

  - by Koning Baard

  I am new to C++, and let's say I have two classes: Creature and Human: /* creature.h */ class Creature { private: public: struct emotion { /* All emotions are percentages */ char joy; char trust; char fear; char surprise; char sadness; char disgust; char anger; char anticipation; char love; }; }; /* human.h */ class Human : Creature { }; And I have this in my main function in main.cpp: Human foo; My question is: how can I set foo's emotions? I tried this: foo->emotion.fear = 5; But GCC gives me this compile error: error: base operand of '-' has non-pointer type 'Human' This: foo.emotion.fear = 5; Gives: error: 'struct Creature::emotion' is inaccessible error: within this context error: invalid use of 'struct Creature::emotion' Can anyone help me? Thanks P.S. No I did not forget the #includes

  Read the article

• Overriding form submit based on counting elements with jquery.each

  - by MrGrigg

  I am probably going about this all wrong, but here's what I'm trying to do: I have a form that has approximately 50 select boxes that are generated dynamically based on some database info. I do not have control over the IDs of the text boxes, but I can add a class to each of them. Before the form is submitted, the user needs to select at least one item from the select box, but no more than four. I'm a little bit sleepy, and I'm unfamiliar with jQuery overall, but I'm trying to override $("form").submit, and here's what I'm doing. Any advice or suggestions are greatly appreciated. $("form").submit(function() { $('.sportsCoachedValidation').each(function() { if ($('.sportsCoachedValidation :selected').text() != 'N/A') { sportsSelected++ } }); if (sportsSelected >= 1 && sportsSelected <= 4) { return true; } else if (sportsSelected > 4) { alert('You can only coach up to four sports.'); sportsSelected = 0; return false; } else { alert('Please select at least one coached sport.'); sportsSelected = 0; return false; } });

  Read the article

• problem linking vba modules in MS Access 2007

  - by Ted

  I am upgrading a database system from Access 2000 db to Access 2007, which communicates with several chemistry measuring devices(pH meter, scale, etc) via an RS 232 serial port. The first db consists of several modules containing vba code that enables the communications with the ports, as well as supports the code behind the forms in the second db. The user, or lab tech, navigates through the forms in the second db to interact with the lab devices, and also to generate the reports which display the info. from the devices. The reports are also part of the second db. The code works in Access 2000, but once I convert it to 2007, the code in the second db cannot find the function calls in the first db that dictate the progression from screen to screen. I have tried importing the modules into the second db, and I have tried linking them, but it still doesn't work. The error message is #438: "Object doesn't support this property or method." Any suggestions would be greatly appreciated. Here is the code for the first function that is not being called correctly: Description: ' This routine is used to return to the calling form and close the active form. ' ' Input: ' strFormCalled --- the active form ' strCallingForm --- the form that called the active form ' blnUnhideOrOpen --- whether to open or just unhide form Public Sub basReturnToCallingForm(ByVal strFormCalled As String, ByVal _ strCallingForm As Variant, Optional blnUnhideOrOpen As Boolean = True) On Error GoTo err_basReturnToCaliingForm If Not basIsBlankString(strCallingForm) And blnUnhideOrOpen Then DoCmd.OpenForm strCallingForm, acNormal Else Call basUnHideForm(strCallingForm) End If Call basCloseForm(strFormCalled) exit_basReturnToCaliingForm: Exit Sub err_basReturnToCaliingForm: Err.Raise Err.Number, "basReturnToCaliingForm", Err.Description End Sub I will post the second function shortly, but I have to go to a meeting... The second funtion that isn't 'working' is a cmdStartClick that is supposed to be called when a user initializes a pump. However, within that function, it's also sticking on a line that is supposed to progress to the next form in the db. The other thing is that the code works in Access 2002, but not in Access 2007...

  Read the article

• Gettingn Started with Facebook API

  - by Btibert3

  I have a friend that owns a small business and has a Page on Facebook. I want to help her manage it from a marketing perspective, and figure that it may be best to do so through their API. I have skimmed their API documentation, and have a basic working knowledge of Python. What I can't figure out is if I can access their page's data with Python and grab the data on wall posts, who liked posts, etc. Is this possible? I can't find a decent tutorial for someone who is new to programming. To provide context, I have been scraping the Twitter Search API for some time now and I am hoping there is something similar (request certain data elements, and have it returned as structured data I can analyze). I find their API extremely straight forward, and for Facebook, I don't know where to begin. I don't want to create an application, I simply want to access the data that is related to my friend's page. I am hoping to find some decent tutorials and help on what I will need to get started. Any help you can provide will be greatly appreciated.

  Read the article

• Blackberry - custom logic for checkboxes group

  - by SWATI

  if i click on any checkbox all previous checkboxes must get checked "my logic works" if i uncheck a checkbox then all checkboxes after it must get unchecked "how to do that" MyLogic works for storm but not for other models what to do //well what i want to do is i have 5 checkboxes class myscreen { chk_service = new CheckboxField[5]; chk_service[0]= new CheckboxField("1",true) chk_service[1]= new CheckboxField("2",false) chk_service[2]= new CheckboxField("3",false) chk_service[3]= new CheckboxField("4",false) chk_service[4]= new CheckboxField("5",false) CheckboxFieldChangeListener obj = new CheckboxFieldChangeListener(chk_service); chk_service[0].setChangeListener(obj); chk_service[1].setChangeListener(obj); chk_service[2].setChangeListener(obj); chk_service[3].setChangeListener(obj); chk_service[4].setChangeListener(obj); hm4 = new HorizontalFieldManager(); hm4.add(chk_service[0]); hm4.add(chk_service[1]); hm4.add(chk_service[2]); hm4.add(chk_service[3]); hm4.add(chk_service[4]); add(hm4); } public CheckboxFieldChangeListener (CheckboxField[] arrFields) { m_arrFields = arrFields; } public void fieldChanged(Field field, int context) { if(true == ((CheckboxField) field).getChecked()) { for(int i = 0; i < m_arrFields.length; i++) { if(m_arrFields[i]==field) { //a[j]=i; j++; break; } else { CheckboxField oField = m_arrFields[i]; oField.setChecked(true); } } } a[k] = j; if(false == ((CheckboxField) field).getChecked()) { for(int i =field.getIndex(); i < m_arrFields.length; i++) { if(m_arrFields[i]==field) { //a[j]=i; j++; break; } else { CheckboxField oField = m_arrFields[i]; oField.setChecked(false); } } } } }

  Read the article

• Java extends classes - Share the extended class fields within the super class.

  - by Bastan

  Straight to the point... I have a class public class P_Gen{ protected String s; protected Object oP_Gen; public P_Gen(String str){ s = str; oP_Gen = new Myclass(this); } } Extended class: public class P extends P_Gen{ protected Object oP; public P(String str){ oP = new aClass(str); super(str); } } MyClass: public class MyClass{ protected Object oMC; public MyClass(P extendedObject){ oMc = oP.getSomething(); } } I came to realize that MyClass can only be instantiated with (P_Gen thisObject) as opposed to (P extendedObject). The situation is that I have code generated a bunch of classes like P_Gen. For each of them I have generated a class P which would contains my P specific custom methods and fields. When I'll regenerate my code in the future, P would not be overwritten as P_Gen would. ** So what happened in my case???!!!... I realized that MyClass would beneficiate from the info stored in P in addition to only P_Gen. Would that possible? I know it's not JAVA "realistic" since another class that extends P_Gen might not have the same fields... BY DESIGN, P_Gen will not be extended by anything but P.... And that's where it kinda make sens. :-) at least in other programming language ;-) In other programming language, it seems like P_Gen.this === P.this, in other word, "this" becomes a combination of P and P_Gen. Is there a way to achieve this knowing that P_Gen won't be extended by anything than P?

  Read the article

• Zend_Db Enum Values [Closed]

  - by scopus

  I find this solution $metadata = $result->getTable()->info('metadata'); echo $metadata['Continent']['DATA_TYPE']; Hi, I want to get enum values in Zend_Db. My Code: $select = $this->select(); $result = $select->fetchAll(); print_r($result->getTable()); Output: Example Object ( [_name] => country [query] => Zend_Db_Table_Select Object ( [_info:protected] => Array ( [schema] => [name] => country [cols] => Array ( [0] => Code [1] => Continent ) [primary] => Array ( [1] => Code ) [metadata] => Array ( [Continent] => Array ( [SCHEMA_NAME] => [TABLE_NAME] => country [COLUMN_NAME] => Continent [COLUMN_POSITION] => 3 [DATA_TYPE] => enum('Asia','Europe','North America','Africa','Oceania','Antarctica','South America') [DEFAULT] => Asia [NULLABLE] => [LENGTH] => [SCALE] => [PRECISION] => [UNSIGNED] => [PRIMARY] => [PRIMARY_POSITION] => [IDENTITY] => ) I see enum values in data_type but i don't get this values. How can get data_type?

  Read the article

• How to access web.config connection string in C#?

  - by salvationishere

  I have a 32-bit XP running VS 2008 and I am trying to decrypt my connection string from my web.config file in my C# ASPX file. Even though there are no errors returned, my current connection string doesn't display contents of my selected AdventureWorks stored procedure. I entered it: C:\Program Files\Microsoft Visual Studio 9.0\VC>Aspnet_regiis.exe -pe "connectionStrings" -app "/AddFileToSQL2" Then it said "Succeeded". And my web.config section looks like: <connectionStrings> <add name="Master" connectionString="server=MSSQLSERVER;database=Master; Integrated Security=SSPI" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString2" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Persist Security Info=true; " providerName="System.Data.SqlClient" /> </connectionStrings> And my C# code behind looks like: string connString = ConfigurationManager.ConnectionStrings["AdventureWorksConnectionString2"].ConnectionString; Is there something wrong with the connection string in the web.config or C# code behind file?

  Read the article

• Performing centralized authorization for multiple applications

  - by Vaibhav

  Here's a question that I have been wrestling with for a while. We have a situation wherein we have a number of applications that we have created. These have grown organically over a period of time. All of these applications have permissions code built into them that controls access to various parts of the application depending on whether the currently logged in user has the necessary permissions or not. Alongside these applications is a utility application which allows an administrator to map users to permissions for all applications - the way it works is that every application has code which reads this external database of the said utility application to check if the currently logged in user has the necessary permission or not. Now, the question is this. Should the user-permissions mapping information reside in and be owned by the applications themselves, or is it okay to have this information reside within an external entity/DB (as in this case the utility application's database). Part of me thinks that application permissions are very specific to the application context itself, so shouldn't be separated from the application itself. But I am not sure. Any comments?

  Read the article

• [php,mysql] insert only adds upto 1000 records and ignoresall records after that.

  - by user560559

  Hello i have a large database where the client stores personal messages and fire email notifications [if allowed by the users]. certain users have the option of sending messages to their entire network of friends. some users have over 5000 friends in their network so if they select the whole network they'll be sending messages to over 5000 friends and system will store all the messages into a table. the problem is this that it does not insert more than 1000 records and ignores all inserts after the first 1000. i have increased the packet size, bulk_insert_buffer_size but still no luck. since the system stores some of the info in another table for reports, every insert returns its new message id. due to this i can not use the "insert into table (column1,column2) values (value1,value2) , (value1,value2)....etc." table engine is innodb, mysql version is 5.1.3 and is hosted on amazon web services. all i want is to fix this issue of inserting more than 1000 records at a time. as mentioned earlier, it works fine but only up to 1000 records and simply ignores all the records after that. i'm using php foreach(){} to insert message for each friend and if email is available, send notification to the user. this foreach(){} also inserts the same record in another table [with only 3 columns] for generating reports. thank you in advance for all the help and support. WMA.

  Read the article

• Best practices for creating a logger library using log4net. Is

  - by VolleyBall Player

  My goal is to create a log4net library that can be shared across multiple projects. In my solution which is in .net 4.0, I created a class library called Logger and referenced it from web project. Now I created a logger.config in the class library and put all the configuration in the logger.config file. I then used [assembly: log4net.Config.XmlConfigurator(Watch = true, ConfigFile = "Logger.config")] When I run the web app nothing is getting logged. So I added this line of code in web.config <add key="log4net.Internal.Debug" value="true"/> which gave me debugging info and error information Failed to find configuration section 'log4net' in the application's .config file. Check your .config file for the and elements. The configuration section should look like: I moved the configuration from logger.config to web.config and everything seems to work fine. I don't want the log4net configuration in web.config but have it logger.config as a cleaner approach. The goal is to make other projects use this library and not have to worry about configuration in every project. Now the question is, How do I do this? What am I doing wrong? Any suggestion with code example will be beneficial to everyone. FYI, I am using structure map IOC to reslove the logger before logging to it.

  Read the article

• Improve a regex statement in order to be as efficient as it can be

  - by user551625

  I have a PHP program that, at some point, needs to analyze a big amount of HTML+javascript text to parse info. All I want to parse needs to be in two parts. Seperate all "HTML goups" to parse Parse each HTML group to get the needed information. In the 1st parse it needs to find: <div id="myHome" And start capturing after that tag. Then stop capturing before <span id="nReaders" And capture the number that comes after this tag and stop. In the 2nd parse use the capture nº 1 (0 has the whole thing and 2 has the number) from the parse made before and then find . I already have code to do that and it works. Is there a way to improve this, make it easier for the machine to parse? preg_match_all('%<div id="myHome"[^>]>(.*?)<span id="nReaders[^>]>([0-9]+)<"%msi', $data, $results, PREG_SET_ORDER); foreach($results AS $result){ preg_match_all('%<div class="myplacement".*?[.]php[?]((?:next|before))=([0-9]+).*?<tbody.*?<td[^>]>.*?[0-9]+"%msi', $result[1], $mydata, PREG_SET_ORDER); //takes care of the data and finish the program Note: I need this for a freeware program so it must be as general as possible and, if possible, not use php extensions ADD: I ommitted some parts here because I didn't expect for answers like those. There is also a need to parse text inside one of the tags that is in the document. It may be the 6th 7th or 8th tag but I know it is after a certain tag. The parser I've checked (thx profitphp) does work to find the script tag. What now? There are more than 1 tag with the same class. I want them all. But I want only with also one of a list of classes..... Where can I find instructions and demos and limitations of DOM parsers (like the one in http://simplehtmldom.sourceforge.net/)? I need something that will work on, at least, a big amount of free servers.

  Read the article

< Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >