Search Results

Search found 33443 results on 1338 pages for 'reply list'.

Page 643/1338 | < Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• Save open emails when exiting Outlook 2007?

  - by BigChief

  I use open emails as my todo list in Outlook 2007. For instance, when I look at my Inbox in the morning, I open all emails which I need to respond to, and throughout the day read, respond to and close each one. It's an odd system but it's how I manage my emails. Are there any addons available which will save open emails and reopen them if Outlook is restarted? I'm looking for behavior like Firefox's tabs, which will reopen each one if the process gets killed.

  Read the article

• How to hide completed tasks in Mail?

  - by Pierre W

  Is there a way to hide completed tasks in the list display in Mail app. on Mac ?

  Read the article

• How do I determine the path to Applications within "Open with" context menu on OS X?

  - by Michael Prescott

  I've got several versions of the Flash Player listed in my "Open with" context menu. I'd like to determine the path to those applications. I'd also like greater control over those items in the list. How can I determine the path to and change the path to Applications listed in teh "Open with" menu?

  Read the article

• rsync -c -i flags identical files as different

  - by Scott

  My goal: given a list of files on local server, show any differences to the files with the same absolute path on remote server; e.g. compare local /etc/init.d/apache to same file on remote server. "Difference" for me means different checksum. I don't care about file modification times. I also do not want to sync the files (yet); only show the diffs. I have rsync 3.0.6 on both local and remote servers, which should be able to do what I want. However, it is claiming that local and remote files, even with identical checksums, are still different. Here's the command line: $ rsync --dry-run -avi --checksum --files-from=/home/me/test.txt --rsync-path="cd / && rsync" / me@remote:/ where: "me" = my username; "remote" = remote server hostname current working directory is '/' test.txt contains one line reading "/etc/init.d/apache" OS: Linux 2.6.9 Running cksum on /etc/init.d/apache on both servers yields the same result. The files are the same. However, rsync output is: me@remote's password: building file list ... done .d..t...... etc/ cd+++++++++ etc/init.d/ <f+++++++++ etc/init.d/apache sent 93 bytes received 21 bytes 20.73 bytes/sec total size is 2374 speedup is 20.82 (DRY RUN) The output codes (see http://www.samba.org/ftp/rsync/rsync.html) mean that rsync thinks /etc is identical except for mod time /etc/init.d needs to be changed /etc/init.d/apache will be sent to the remote server I don't understand how, with --checksum option, and the files having identical checksums, that rsync should think they're different. (I've tried with other files having identical mod times, and those files are not flagged as different.) I did run this in /, and made sure (AFAIK) that it's run remotely in /, so even relative pathnames will still be correct. I ran rsync with -avvvi for more debug info, but saw nothing remarkable. I'm wondering: is rsync still looking at file mod times, even with --checksum? am I somehow not setting up the path(s) right? what am I doing wrong?

  Read the article

• How can my CGI program access non-browseable files?

  - by Zerobu

  I was wondering if it was possible to read a text file that was located in a directory called "/home/user/files" I wanted to read it from my cgi-bin which is located in /home/user/cgi-bi/ Below is my code, #!/usr/bin/perl use strict; use CGI; #Virtual Directory #Steffan Harris eval { use constant PASSWORD => 'perl'; use constant UPLOAD_DIR => '/home/sharris2/files'; sub mapToFile { print chdir UPLOAD_DIR; } #This function will list all files in a directory. sub listDirectoryFiles { chdir UPLOAD_DIR; my @files = <*>; mapToFile; print<<LIST; <h2>Current Files</h2> <ul> LIST if(!$files[0]) { print" </ul>\n<em>No files in directory</em>"; } foreach(@files) { print" <li>$_</li>"; } print " </ul>\n"; } #This function generates a 404 Not Found error sub generate404 { print<<RESPONSE; Status: 404 Not Found Content-Type: text/html <html> <head><title>404 Not Found</title></head> <body> <p> <h1>404 - Not Found</h1> </p> The requested URL <b>$ENV{"HTTP_HOST"}$ENV{"REQUEST_URI"}</b> was not found on the server. </body> </html> RESPONSE exit; } #This function checks the path info to see if it matches a file in the UPLOAD_DIR directory, If it does not, then it returns a 404 error sub checkExsistence { if($ENV{"PATH_INFO"}) { chdir UPLOAD_DIR; my @files = <*>; if(!$files[0] and $ENV{"PATH_INFO"} eq "/") { return; } foreach(@files) { if($ENV{"PATH_INFO"} eq "/".$_ || $ENV{"PATH_INFO"} eq "/") { print "yes"; return; } } generate404; } } sub checkPassword { my ($password, $cgi); $cgi = new CGI; $password = $cgi->param('passwd'); unless($password eq PASSWORD) { print<<RESPONSE; Status: 200 OK Content-Type: text/html <html> <head> <title>Incorrect Password</title> </head> <body> <h1>Invalid password entered.</h1> <h3><a href="/~sharris2/cgi-bin/files/">Go Back</a></h3> </body> RESPONSE exit; } } sub upLoadFile { checkPassword; my ($uploadfile, $cgi); $cgi = new CGI; $uploadfile = $cgi->upload('uploadfile'); chdir UPLOAD_DIR; $uploadfile or die "Did not receive a file to upload"; open my $FILE, '>', UPLOAD_DIR."/$uploadfile" or die "$!"; while(<$uploadfile>) { print $FILE $_; } } #Start of main part of program my $cgi = new CGI; if(!$ENV{"PATH_INFO"}) { print $cgi->redirect('/~sharris2/cgi-bin/files/'); } checkExsistence; if($ENV{"REQUEST_METHOD"} eq "POST") { upLoadFile; } print <<"HEADERS"; Status: 200 OK Content-Type: text/html HEADERS print <<"HTML"; <html> <head> <title>Virtual Directory</title> </head> <body> HTML listDirectoryFiles; print<<HTML; <h2>Upload a new file</h2> <form method = "POST" enctype = "multipart/form-data" action = "/~sharris2/cgi-bin/files/" /> File:<input type = "file" name="uploadfile"/> <p>Password: <input type = "password" name ="passwd"/></p> <p><input type = "submit" value= "Submit File" /></p> </form> </body> </html> HTML };

  Read the article

• How do I dock a pidgin window in X?

  - by Simon

  Using the Windows Pidgin Options plugin, I can make the buddy list be dockable. If I dock it, other windows avoid it when maximising themselves. How do I do the same thing in X?

  Read the article

• Postfix mailq - send every x minutes

  - by Mike

  I got about 2000 clients on my website that have subscribed to our mailing list. I've used in the past Swift Mailer but it didn't work the way it was supposed to. I'm wondering if there is a way that Postfix could keep emails on the mailq (if lots of emails are sent at the same time) and send chunks of 20-30 emails every 10-20 mins. So this way, our server is not blacklisted. Any suggestions will be appreciate it.

  Read the article

• Remove command from auto-completion / history

  - by dushyantp

  In windows command prompt, say we are running a command (batch file) runtest but we typo as runtet Then when we press F8 next time at 'run',it will still pop with 'runtet'. Is there any way to remove this incorrect command from auto completion list without restarting the cmd prompt? Or a better way to achieve this? Without restarting because, there are other commands which are relevant for auto completion and also the environment (though it can be set by batch file).

  Read the article

• How can I remove all the files which has a string in a file

  - by michael

  Hi, I am trying to remove all the files in a directory hierarchy which a certain string inside the file (not the file name, it is the file content). I can list out all the file name which has a string in the file using 'grep -r -l mystringlooking for'. But how can I remove all the files returned by the grep ? I am trying this on ubuntu. Thank you.

  Read the article

• Server 2012 intermittently fails to respond to pings from single host, even with firewall disabled, but responds to non-ICMP requests fine

  - by James Westbury

  This one is kind of weird. I've got the following machines involved: DC01 - 10.1.2.42, Server 2012, domain controller & DNS server, physical machine nagiosv - 10.1.2.35, CentOS 6.4, Nagios, virtual machine CB01 - 10.1.3.81, Ubuntu 12.04 LTS, couchbase server, virtual machine So, I noticed something was wrong while configuring this new Nagios VM. I started seeing DC01's state flapping. I logged into nagiosv when I saw this happening, and attempted to ping DC01, both by FQDN and its IP address. Neither worked. I tried pinging the machine from CB01, which is another VM on the same virtual switch/physical NIC as nagiosv, and that worked fine. Pings still failing from nagiosv at this time. DC01 is also an internal DNS server, so I ran dig google.com from nagiosv, and was able to run a query against DC01 just fine: ;; Query time: 1 msec ;; SERVER: 10.1.2.42#53(10.1.2.42) ;; WHEN: Fri Nov 1 07:53:51 2013 ;; MSG SIZE rcvd: 204 Pings still failing from nagiosv, though. I can ping from DC01 to nagiosv, and that works, and I can still ping from other VMs on the same physical NIC into DC01, and that works. I should mention at this point that I've disabled the firewall on DC01 for testing purposes, and it doesn't make a damned bit of difference. (Even with the firewall enabled, I have a blanket exception for ICMP from the local subnet, so it shouldn't make a difference, but I figured I should test it anyway.) I loaded up Wireshark on DC01 and pinged it from nagiosv again. What I see is a bunch of echo requests coming in and not a single reply going back out. Filtered results here, showing all ICMP traffic during a 15-second period. A few more bits of info: There are no IP conflicts on the network. MAC addresses on the incoming pings match the MAC on the VM. There are no duplicate MACs on the network, as far as I can see. I have absolutely no idea why DC01 is failing to respond, here. Any ideas?

  Read the article

• Outlook automation

  - by Ace Pace

  What do people here use to automate work with outlook? Programming scripts to filter messages instead of using the GUI? A macro to email out notices based on an Excel list with dates? I'm looking for further ideas on automating the paperwork parts of my day.

  Read the article

• Preserve indention converting RTF to TXT on OS X

  - by Dan

  I made a multi-level bulleted list in TextEdit that looks something like: foo bar stuff things However, when I try to convert it to text (via cmd-shift-T, copy and paste, or textutil), the result looks more like: foo bar stuff things How can I convert to text but preserve the indention?

  Read the article

• How much bandwidth do I really need (to stream video)?

  - by BCS

  I'm looking to get an internet connection for my place (I have been using work, school and coffee shops) and I'm wondering how much bandwidth I really need to do different kinds of things? Google turns up lots of stuff but more than 1/2 are for servers and none of the rest give a "To do A you need X Mb" list.

  Read the article

• What is the best place to setup system wide environment variables on Linux?

  - by Sorin Sbarnea

  I just want to setup a system wide environment variable, JAVA_HOME for all users, including root user. Requirements: accessible to normal users accessible to root always loaded, not only for bash (gnome-terminal does not start a bash by default) to work on Ubuntu, Debian and optionally Red Hat great if addition could be easily scripted So far here is the no-list: /etc/profile.d/java.sh - not executed if you start a new console from gnome-terminal /etc/profile - same as above ~/.profile - current user only, also any solution assuming ~ would not be acceptable because home directory could be on NIS, and JAVA_HOME could be different.

  Read the article

• How do I reorder the playlist items in the VLC playlist window?

  - by alex

  In the VLC playlist window, I can't seem to drag the items around to change their order. Is that normal? In every other media player I've used before, this is possible. At the moment I'm resorting to clicking the title to sort the list in an order which is what I want, but I can't guarantee I'll always have the titles so correct! UPDATE No one? I'd have though this would be a staple feature...

  Read the article

• Pros and Cons of Creating an Internal Cerificate Authority

  - by Chad

  What are the pros and cons of spinning up an internal certificate authority (primarily Windows 2003 CA)? We have the need to encypt server-server traffic on a project that has 20+ certificates. We could buy certs from Verisign, but I was thinking that an internal CA might be a better long term solution. So I was looking to the community to provide a pros/cons list of what we might gain (or lose) by hosting our own CA? Thanks in advance for the help.

  Read the article

• What is the most common default computer name (sys properties)

  - by John

  What is the most common default computer name for Windows (Home, Pro, Vista, and 7)? (Or a list of the most common.) I tried Google, and read that Redhat linux defaults to "localhost," and Toshiba laptops (Windows) default to Toshiba, and some Dells default to DELL+some model number.

  Read the article

• View all unplayed podcasts in Zune desktop software

  - by Matt Lacey

  When using the Zune desktop software, is it possible to view a list of all unplayed downloaded podcasts? I don't want to have to keep looking through each individual subscribed podcast for any new shows.

  Read the article

• Silverlight/Web Service Serializing Interface for use Client Side

  - by Steve Brouillard

  I have a Silverlight solution that references a third-party web service. This web service generates XML, which is then processed into objects for use in Silverlight binding. At one point we the processing of XML to objects was done client-side, but we ran into performance issues and decided to move this processing to the proxies in the hosting web project to improve performance (which it did). This is obviously a gross over-simplification, but should work. My basic project structure looks like this. Solution Solution.Web - Holds the web page that hosts Silverlight as well as proxies that access web services and processes as required and obviously the references to those web services). Solution.Infrastructure - Holds references to the proxy web services in the .Web project, all genned code from serialized objects from those proxies and code around those objects that need to be client-side. Solution.Book - The particular project that uses the objects in question after processed down into Infrastructure. I've defined the following Interface and Class in the Web project. They represent the type of objects that the XML from the original third-party gets transformed into and since this is the only project in the Silverlight app that is actually server-side, that was the place to define and use them. //Doesn't get much simpler than this. public interface INavigable { string Description { get; set; } } //Very simple class too public class IndexEntry : INavigable { public List<IndexCM> CMItems { get; set; } public string CPTCode { get; set; } public string DefinitionOfAbbreviations { get; set; } public string Description { get; set; } public string EtiologyCode { get; set; } public bool HighScore { get; set; } public IndexToTabularCommandArguments IndexToTabularCommandArgument { get; set; } public bool IsExpanded { get; set; } public string ManifestationCode { get; set; } public string MorphologyCode { get; set; } public List<TextItem> NonEssentialModifiersAndQualifyingText { get; set; } public string OtherItalics { get; set; } public IndexEntry Parent { get; set; } public int Score { get; set; } public string SeeAlsoReference { get; set; } public string SeeReference { get; set; } public List<IndexEntry> SubEntries { get; set; } public int Words { get; set; } } Again; both of these items are defined in the Web project. Notice that IndexEntry implments INavigable. When the code for IndexEntry is auto-genned in the Infrastructure project, the definition of the class does not include the implmentation of INavigable. After discovering this, I thought "no problem, I'll create another partial class file reiterating the implmentation". Unfortunately (I'm guessing because it isn't being serialized), that interface isn't recognized in the Infrastructure project, so I can't simply do that. Here's where it gets really weird. The BOOK project CAN see the INavigable interface. In fact I use it in Book, though Book has no reference to the Web Service in the Web project where the thing is define, though Infrastructure does. Just as a test, I linked to the INavigable source file from indside the Infrastructure project. That allowed me to reference it in that project and compile, but causes havoc in the Book project, because now there's a conflick between the one define in Infrastructure and the one defined in the Web project's web service. This is behavior I would expect. So, to try and sum up a bit. Web project has a web service that process data from a third-party service and has a class and interface defined in it. The class implements the interface. The Infrastructure project references the web service in the Web Project and the Book project references the Infrastructure project. The implmentation of the interface in the class does NOT serialize down, so the auto-genned code in INfrastructure does not show this relationship, breaking code further down-stream. The Book project, whihc is further down-stream CAN see the interface as defined in the Web Project, even though its only reference is through the Infrastructure project; whihc CAN'T see it. Am I simple missing something easy here? Can I apply an attribute to either the Interface definition or to the its implmentation in the class to ensure its visibility downstream? Anything else I can do here? I know this is a bit convoluted and anyone still with me here, thanks for your patience and any advice you might have. Cheers, Steve

  Read the article

• Where would you document standardized complex data that is passed between many objects and methods?

  - by Eli

  Hi All, I often find myself with fairly complex data that represents something that my objects will be working on. For example, in a task-list app, several objects might work with an array of tasks, each of which has attributes, temporal expressions, sub tasks and sub sub tasks, etc. One object will collect data from web forms, standardize it into a format consumable by the class that will save them to the database, another object will pull them from the database, put them in the standard format and pass them to the display object, or the update object, etc. The data itself can become a fairly complex series of arrays and sub arrays, representing a 'task' or list of tasks. For example, the below might be one entry in a task list, in the format that is consumable by the various objects that will work on it. Normally, I just document this in a file somewhere with an example. However, I am thinking about the best way to add it to something like PHPDoc, or another standard doc system. Where would you document your consumable data formats that are for many or all of the objects / methods in your app? Array ( [Meta] => Array ( //etc. ) [Sched] => Array ( [SchedID] => 32 [OwnerID] => 2 [StatusID] => 1 [DateFirstTask] => 2011-02-28 [DateLastTask] => [MarginMonths] => 3 ) [TemporalExpressions] => Array ( [0] => Array ( [type] => dw [TemporalExpID] => 3 [ord] => 2 [day] => 6 [month] => 4 ) [1] => Array ( [type] => dm [TemporalExpID] => 32 [day] => 28 [month] => 2 ) ) [Task] => Array ( [SchedTaskID] => 32 [SchedID] => 32 [OwnerID] => 2 [UserID] => 5 [ClientID] => 9 [Title] => Close Prior Year [Body] => [DueTime] => ) [SubTasks] => Array ( [101] => Array ( [SchedSubTaskID] => 101 [ParentST] => [RootT] => 32 [UserID] => 2 [Title] => Review Profit and Loss by Class [Body] => [DueDiff] => 0 ) [102] => Array ( [SchedSubTaskID] => 102 [ParentST] => [RootT] => 32 [UserID] => 2 [Title] => Review Balance Sheet [Body] => [DueDiff] => 0 ) [103] => Array ( [SchedSubTaskID] => 103 [ParentST] => [RootT] => 32 [UserID] => 2 [Title] => Review Current Year for Prior Year Expenses to Accrue [Body] => Look at Journal Entries that are templates as well. [DueDiff] => 0 ) [104] => Array ( [SchedSubTaskID] => 104 [ParentST] => [RootT] => 32 [UserID] => 2 [Title] => Review Prior Year Membership from 11/1 - 12/31 to Accrue to Current Year [Body] => [DueDiff] => 0 ) [105] => Array ( [SchedSubTaskID] => 105 [ParentST] => [RootT] => 32 [UserID] => 2 [Title] => Enter Vacation Accrual [Body] => [DueDiff] => 0 ) [106] => Array ( [SchedSubTaskID] => 106 [ParentST] => 105 [RootT] => 32 [UserID] => 2 [Title] => Email Peter requesting Vacation Status of Employees at Year End [Body] => We need Employee Name, Rate and Days of Vacation left to use. We also need to know if the employee used any of the prior year's vacation. [DueDiff] => 43 ) [107] => Array ( [SchedSubTaskID] => 107 [ParentST] => [RootT] => 32 [UserID] => 2 [Title] => Grants Receivable at Year End [Body] => [DueDiff] => 0 ) [108] => Array ( [SchedSubTaskID] => 108 [ParentST] => 107 [RootT] => 32 [UserID] => 2 [Title] => Email Peter Requesting if there were and Grants Receivable at year end [Body] => [DueDiff] => 43 ) ) )

  Read the article

• GNOME expand all folders?

  - by StackedCrooked

  In Nautilus "list view" subfolders can be opened by clicking the "+" icon next to it. Would it possible to open all subfolders recursively in one click? I tried various combinations of ctrl/alt/shift-clicking but none seems to work.

  Read the article

• hosts.allow and hosts.deny WHM Host Access Control - what if my IP changes?

  - by beingalex

  I want to use WHM/Cpanel's Host Access Control interface to change some settings in hosts.allow and hosts.deny. I want to block all access to our SSH exept from the IP we have from our office. Daemon Access List Action Comment sshd ALL EXCEPT x.x.x.x deny Deny access from all other IPs apart from ours But I am worried about what happens if our IP changes, which it does about twice a week. How would I get back in to edit the hosts.allow / hosts.deny files?

  Read the article

• What file types can OpenOffice read or write

  - by Nifle

  Could anyone give me a current list of file types OpenOffice supports. Both what it can open and what it can export to?

  Read the article

• Automatically disable devices to save power and mitigate DMA attack in Windows 7

  - by Martheen Cahya Paulo

  Some OEM include energy saving apps that can switch off certain devices such as webcam or optical drive. Is there any brand-agnostic app out there that can do it? If the list of disabled device is customizable, it would be useful too for mitigating DMA attack (disabling Firewire, PCMCIA, SDIO, Thunderbolt, etc). Even better if it can recognize lock/logoff event, to mimic OSX behavior in mitigating the DMA attack.

  Read the article

< Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >