Search Results

Search found 21053 results on 843 pages for 'out of process'.

Page 645/843 | < Previous Page | 641 642 643 644 645 646 647 648 649 650 651 652  | Next Page >

  • tftpd-hpa service must be restarted before working after fresh boot

    - by Steve
    I'm running Ubuntu 12.04 inside a VirtualBox VM. I've installed tftpd-hpa so I can boot an embedded Linux device via tftp. My problem is that after a fresh boot of the VM, tftpd doesn't seem to work until I restart the service, after which is works great until the system is rebooted. The transcript below should explain the situation. EDIT: After the fresh boot, I execute netstat -a | grep tftp and find nothing. After restarting the service, the same command returns udp 0 0 *:tftp *:* (whitespace removed). I think this might be the key to the problem, I'm just not sure how to resolve it. I don't think it's related to this specific issue, but I had another problem with tftpd that was asked and answered in this question. steve@steve-VirtualBox:~$ cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" steve@steve-VirtualBox:~$ ls -l /var/lib/tftpboot total 8204 -rw-r--r-- 1 root root 34352 May 28 08:22 am335x-boneblack.dtb -rw-r--r-- 1 root root 33206 May 28 08:22 am335x-bone.dtb -rw-r--r-- 1 root root 41564 May 28 08:22 am335x-evm.dtb -rw-r--r-- 1 root root 38048 May 28 08:22 am335x-evmsk.dtb -rwxr-xr-x 1 root root 4117904 May 20 09:39 zImage -rw-r--r-- 1 root root 4117616 May 28 08:22 zImage-am335x-evm.bin steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Transfer timed out. tftp> quit steve@steve-VirtualBox:~$ sudo service tftpd-hpa restart [sudo] password for steve: tftpd-hpa stop/waiting tftpd-hpa start/running, process 2106 steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Received 4143798 bytes in 1.4 seconds tftp> quit steve@steve-VirtualBox:~$

    Read the article

  • Has anyone used tools like (Chef, Salt, Puppet, CfEngine) to configure a 2008 Win Server with Sql?

    - by Development 4.0
    I have been looking into tools to automate the creation of servers. For two different reasons: Production Development machines I love the idea of the immutable server. I have seen the tools demoed and used successfully on *nix boxes running Rails or Lamp etc. Has anyone found a good way to do this in the Microsoft stack? I would like to get in on the fun and create scripts that will install Windows, patch it according to specification, deploy Sql Server create scripts to build out a database and just for fun deploy SharePoint and configure it, and then deploy a SharePoint solution to it. I can get part of the way, install Windows manually, install Sql Server manually, use Powershell to do all the configuration and setup. Install SharePoint and configure part of it, then powershell for the rest of the configuration and deploying a solution. I would love to have the ability to run one script though, or at least one unified process. I can, and have mostly used VM template images and then instantiated them, but the creation of the template is usually a manual step.

    Read the article

  • Resolving a BSOD/CPU/GPU issue...

    - by Christian Sciberras
    Hello all, I'm getting a BSOD / system crash (sometimes the PC just quits without a BSOD). Hardware Specifications cpu: i7 920 2666MHz / 8 cores (not OCed afaik) mobo: Asus P6T SE ram: 2x Corsair CM3X2G1333C9 (64bit DDR3 667MHz) gfx: ATI Radeon HD 5970 1GB (XFX HD5970 BE) os: Windows 7 Ultimate 64 bit (legit) All bios, firmware and drivers are all up to date (as of today). Symptoms Sometimes the PC runs smoothly, sometimes I get this BSOD. The BSOD always happens when I'm doing something related to graphics, such as viewing a video or playing a game. I get to know about the imminent BSOD ~10 seconds earlier; the PC starts freezing occasionally but increasing in frequency and length of lag (I noticed processor usage in creased from Process Monitor). I've tweaked BIOS settings occasionally but afaik, it was in vain. A day or so ago, I reset it to factory settings. BSOD contents The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88001f35180, 0x0000000000000004). 15-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 4 23-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 2 Important The interesting thing is that although the event log (and BSOD screen) blame a "secondary processor", Windows Action Center sometimes blamed the GFX driver (for the same error). Also It is interesting to note that after hibernating my PC, I always get the BSOD.

    Read the article

  • Deploying workstations - best practices?

    - by V. Romanov
    Hi guys I've been researching on the subject of workstation deployment for a while, and found a ton of info and dozens different methods and tools, but no "best practice" method that doesn't lack at least one feature that i consider required for the solution to be perfect. I'm currently interested in windows workstation deployment, but if the tools can be extended to Linux, then it's an added value. I want the deployment tools I use to be able to do the following: hardware independent - I want my image or installation to have a minimum of hardware and driver dependency, so that i can use a single image/package for all workstations easily updatable - I want to be able to update my image as easily as possible without redeploying/rebuilding/reimaging all configurations PXE bootable deployment - I want the tools to be bootable off the network so that I don't need a boot cd/DOK. scriptable for minimum human input - Ideally, the tool should run automatically after being booted and perform a "default" deployment (including partitioning) unless prompted otherwise. i.e - take a pc, hook it up, power on, PXE boot and forget about it until the OS is deployed. I found no single product or environment that does all this. Closest i came to is the windows deployment services/WIM image format. I also checked out numerous imaging and deployment tools including clonezilla, ghost, g4u, wpkg and others, but most of them lack the hardware Independence and updatability features. We currently have a Symantec Ghost server setup that does imaging over the network, but I'm not satisfied with it as it has all the drawbacks i listed above. Do you have suggestions how to optimize the process of workstation deployment? How do you deploy them in your organization? Thanks! Vadim.

    Read the article

  • Is it possible to install ffmpeg and x264 on a Synology Diskstation 209?

    - by Kieran Benton
    Hi, Complete linux novice here! :) I'm trying to get my brilliant DS209 NAS box to do some transcoding for me of a few AVI videos to a format suitable for my Apply iTouch - yes I could do it with another machine and Handbrake but it would be really useful to offload some of this to the NAS to do overnight. I've managed to install ipkg onto my DS209 NAS box and have played around with installing some packages (binutils, mono, bash etc). I've even managed to install ffmpeg from ipkg and put together the correct command line profile to do the encoding as a .sh file: time ffmpeg -y -i $1 -f mp4 -title $2 -vcodec libx264 -level 21 -s 426×320 -b 512k -bt 512k -bufsize 4M -maxrate 4M -g 250 -coder 0 -threads 0 -acodec libfaac -ac 2 -ab 64k $3 However running this I get a missing dependency on libx264. I've tried building this from the latest source in git, but I get errors during the make process that I just don't understand (way out of my depth). encoder/set.c: In function 'x264_sei_version_write': encoder/set.c:491: error: 'X264_VERSION' undeclared (first use in this function) encoder/set.c:491: error: (Each undeclared identifier is reported only once encoder/set.c:491: error: for each function it appears in.) make: *** [encoder/set.o] Error 1 Can anyone else try building it or give me a pointer as to what I can do to get this going? Its been a good learning experience so far! Thanks.

    Read the article

  • Brick-level backup and restore with exchange 2007

    - by V. Romanov
    In the company I'm working for, we use exchange 2007 and backup it using netbackup. The backup is a daily complete backup of the information store and the direct corollary of this is that restores are hell. We need to restore the entire information store (over 80 gb), somehow merge it back with the original store, which causes problems. Alternatively, we tried using QUEST software to emulate exchange and restore mails from the emulation. However, this proved unreliable. The main problem with this entire situation is that we have to restore the whole information store and walk it through the restore process manually, and its quite absurd to be forced spend more than a day restoring even one erased email. (we have erased mail retention, but sometimes we need to restore older mail). in comparison, back in the day of XCH2003 and backupexec 12, we had complete brick level backup and restore at the push of a button. I've spoken to one of our chief sysadmins who claimed that the official response from microsoft to this issue was - "sorry guys, no brick level backup in XCH2007" which sounds ridiculous to me. Can someone shed some light on the situation? How do you backup your exchange2007 stores? Can you restore a single email quickly? A mailbox, perhaps?

    Read the article

  • uWSGI cannot find "application" using Flask and Virtualenv

    - by skyler
    Using uWSGI to serve a simple wsgi app, (a simple "Hello, World") my configuration works, but when I try to run a Flask app, I get this in uWSGI's error logs: current working directory: /opt/python-env/coefficient/lib/python2.6/site-packages writing pidfile to /var/run/uwsgi.pid detected binary path: /opt/uwsgi/uwsgi setuid() to 497 your memory page size is 4096 bytes detected max file descriptor number: 1024 lock engine: pthread robust mutexes uwsgi socket 0 bound to TCP address 127.0.0.1:3031 fd 3 Python version: 2.6.6 (r266:84292, Jun 18 2012, 14:18:47) [GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] Set PythonHome to /opt/python-env/coefficient/ *** Python threads support is disabled. You can enable it with --enable-threads *** Python main interpreter initialized at 0xbed3b0 your server socket listen backlog is limited to 100 connections *** Operational MODE: single process *** added /opt/python-env/coefficient/lib/python2.6/site-packages/ to pythonpath. unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) *** no app loaded. going in full dynamic mode *** *** uWSGI is running in multiple interpreter mode ***` Note in particular this part of the log: unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) **no app loaded. going in full dynamic mode** This is my Flask app: from flask import Flask app = Flask(__name__) @app.route("/") def hello(): return "Hello, World, from Flask!" Before I added my Virtualenv's pythonpath to my configuration file, I was getting an ImportError for Flask. I solved this though, I believe (I'm not receiving errors about it anymore) and here is my complete configuration file: uwsgi: #socket: /tmp/uwsgi.sock socket: 127.0.0.1:3031 daemonize: /var/log/uwsgi.log pidfile: /var/run/uwsgi.pid master: true vacuum: true #wsgi-file: /var/www/coefficient/coefficient.py wsgi-file: /var/www/coefficient/flask.py processes: 1 virtualenv: /opt/python-env/coefficient/ pythonpath: /opt/python-env/coefficient/lib/python2.6/site-packages This is how I start uWSGI, from an rc script: /opt/uwsgi/uwsgi --yaml /etc/uwsgi/conf.yaml --uid uwsgi And if I try to view the Flask program in a browser, I get this: **uWSGI Error** Python application not found Any help is appreciated.

    Read the article

  • It seems Windows 8.1 killed my two T60 laptop batteries

    - by rstock
    Upgraded Windows 7 to Win8 earlier this year, and last week upgraded to Windows 8.1. (Lenovo T60) Had no problem with battery usage when on Win7 nor Win8. After about a week of Win8.1 on my system, the battery stop working, while the system was on. The orange batt. indicator just keeps flashing. The system does not charge the battery (even though I know there was life in it). I installed a known good fully charged battery from another T60, it worked for aboute 40 mins then it instantly died in fron of my eyes. The system now shows the same orange flashing batt. light, but it is not charging. I know both these batteries are still good, they just appear to be dead. My research suggest that the new Win8.1 may not have updated the battery driver to Win8. I have since done that. Same problem. Research i s also pointing me to some 'smart chip' on the batteries that need to a reset. Is this possible ?? Does anyone know a process to reset the 'smart chip' on these batteries (fru# 92P1139) ????

    Read the article

  • Robocopy launches and then hangs/just sits there

    - by NateO
    I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

    Read the article

  • Limit the amount of data that can be stored in a folder on Ubuntu Server 12.04?

    - by dougoftheabaci
    I'm in the process of building my first server. It's up, it's running, I'm transferring copious amounts of data away from my horrid little Drobo (DO NOT BUY ONE OF THESE, EVER). However, there's one thing I have yet to do: I'd like to set it up for Time Machine backups as well. I've seen all the guides and I have some idea of how to set the whole thing up, but the issue is that Time Machine will just fill up as much space as you let it. So if I let it lose in my 8 TB zpool it'll slowly consume every last available sector. This, of course, is not acceptable. I have a folder at the root of my zpool called "ZFS Time Machine" and I would like to limit it to 1 TB (all I need for backup purposes). However, I have no idea how to do that. Is this possible? I can continue using a small external hard drive attached via FW800 if I have to but I'd much rather prefer putting everything on my server.

    Read the article

  • Encryption setup for Linux NAS?

    - by Daniel
    There's a bazillion hard disk encryption HOWTOs, but somehow I can't find one that actually does what I want. Which is: I have a home NAS running Ubuntu, which is being accessed by a Linux and a Win XP client. (Hopefully MacOS X soon...) I want to setup encryption for home dirs on the NAS so that: It does not interfere with the boot process (since the NAS it tucked away in a cupboard), the home dirs should be accessible as a regular file system on the client(s) (e.g. via SMB), it is easy to use by 'normal' people, (so it does not require SSH-ing to the NAS, mount the encrypted partition on command line, then connecting via SMB, and finally umount the partition after being done. I can't explain that to my mom, or in fact to anyone.) does not store the encryption key the NAS itself, encrypts file meta-data and content (i.e. safe against the 'RIAA' attack, where an intruder should not be able to identify which songs are in your MP3 collection). What I hoped to do was use Samba + PAM. The idea was that on connecting to the SMB server, I'd have to enter the password on the client, which sends it to the server for authentication, which would use the password to mount the encrpytion partition, and would unmount it again when the session was closed. Turns out that doesn't really work, because SMB does not transmit the password in the plain and hence I can't configure PAM to use the incoming password to mount the encrypted patition. So... anything I'm overlooking? Is there any way in which I can use the password entered on the client (e.g. on SMB connect) to initiate mounting the encrypted dir on the server?

    Read the article

  • Relax Linux - it's just me! (filesystem permissions)

    - by Xeoncross
    One of my favorite things about Linux is also the most annoying - file system permissions. In production machines and web servers I love how everything is so secure and locked down - but on development machines it really slows me down. I'll give one example out of the many that I discover weekly. Like most people, I dual-boot Ubuntu and Windows so I can continue using the Adobe CS4 suite. I often design web themes and other things while I'm still using windows. Later I'll boot into Ubuntu to take the themes and write the backend PHP for them. After mounting the windows C: drive partition I can copy the template files over so I can begin editing them. However, thanks to Linux desire to protect me I find that after coping the files I end up with a totally locked set of files where even I don't have read-write permissions. So after carful consideration about the tremendous risks that the HTML files pose to me - I chmod them so that I and apache can begin using them. Now given, the chmod process isn't that hard - but after you chmod enough files per day you get sick of doing it. I'm constantly creating, fetch, editing, and removing files from my user, git repos, php, or other random processes. This is a personal development machine after all. Everything changes on a day by day basis. So my question is, how can I get linux to relax about what I'm doing with my HTML/JS/PHP/TXT/SQL/etc. files so that I can work faster without constantly stopping to chmod things? I pinky-promise I won't hack into my account with an HTML file. ;)

    Read the article

  • No OS will boot, all freeze

    - by Gyan
    This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

    Read the article

  • Copying SD Cards with "LaCie d2 Network"

    - by rjstelling
    The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

    Read the article

  • Is this a File Header / Magic Number?

    - by Hammer Bro.
    I've got 120,000 files (way more, actually; this is just an arbitrary subset) of an unknown type. Linux file does not identify them (not that they're necessarily Linux files), nor do any other methods I've tried. There are only two hints about them that I currently have. One is that I suspect some compression is employed -- I have metadata that claims the file sizes are always some amount larger than what I observe. The other is that in 100,000 of these files, the first 16 bytes are always: ff ee ee dd 00 00 00 00 01 00 00 00 00 00 00 00 That really looks like a file header/magic number to me, but I just can't place it. Does anyone know what kind of files this would indicate? Alternatively, can anyone convince me that these suspiciously common bytes certainly do not indicate a specific file type? UPDATE I don't know the exact reverse-engineering details, but most of the files in our case are zips after the first 29(? or so) bytes are ignored. So in practice the problem is solved (we know how to process the files) but in theory the question is still unanswered -- I don't know which application routinely prepends about 29 bytes to its zips. [I'm not sure if I should leave the question open or not at this point.]

    Read the article

  • Lotus Domino - DAOS not reducing file size?

    - by SydxPages
    I have implemented DAOS on a Lotus Domino Server (8.5.3 FP2) as follows: Lotus Domino Server Document: Store file attachments in DAOS: Enabled Minimum size of object before Domino will store in DAOS: 64000 bytes DAOS base path: E:\DAOS Defer object deletion for: 30 days Transaction logging is running, and the specific test database has the following advanced properties set: Domino Attachment and Object Service (ticked) Use LZ1 compression for atachments Compress Database Design Compress Data I have restarted the server. When I run a compact -c, it compacts the database, but does not reduce the size. I have checked the DB in Windows Explorer (60Gb) and the size is the same pre and post. I have checked the directory (E:\DAOS) and it is 35Gb in size. When I run the command 'Tell DAOSMgr Status tmp\test.nsf', I get the following response. From looking up on the net, I believe ticket count = 0 means that the db is not really DAOS'ed? Admin Process: Searching Administration Requests database DAOSMGR: Status tmptest.nsf started DAOS database status: Database: E:\Lotus\Domino\Data\tmp\test.nsf Database state = Synchronized Last resynchronized: 03/09/2012 02:49:13 PM Ticket count: 0 DAOSMGR: Status tmp\test.nsf completed I have run fixup on the database. When I have tried to run the DAOS estimator it has always crashed. This was a problem with larger databases on earlier versions of domino, but not anymore. Can anyone tell me why the size has not reduced? Am I missing anything?

    Read the article

  • Automated software installation for MS Windows?

    - by Duncan Bayne
    I am currently setting up a Windows development environment (the whole Visual Studio 2010 stack plus plugins on top of Windows 7). This has got me wondering whether there's a Windows equivalent to what I do for dev environment setup in Ubuntu. It takes literally hours to get a dev environment set up in Windows, involving a lot of manual intervention. On Ubuntu, I have two shell scripts - one I run as root which configures the system using apt-get (amongst other things), one I run as me which configures my user account. Those scripts live in my private Subversion repository. To set up a dev environment from scratch requires five commands: sudo apt-get install -y subversion svn co http://svn.XXXX.XXX/personal/ cd personal sudo ./ubuntu_setup_root.sh ./ubuntu_setup_user.sh The only human intervention required is to pick a root password for MySQL. So it takes only a few minutes of human attention to go from a vanilla Ubuntu installation to a full development environment with the latest builds of everything, perfectly tailored down to shortcut keys and wallpaper. Is there an equivalent process for Windows? In an ideal world it'd be something trivially scriptable using C# Script or Powershell, which could live in source control & make use of a repository of ISOs downloaded from MSDN ...

    Read the article

  • Is there any special way to force GoBack to work with Windows Vista and 7?

    - by dfree
    Norton/Roxio's GoBack doesn't work with Vista/7 for reasons unknown. I have tried several alternatives (Norton Ghost, RollbackRX, Norton Save and Restore), none of which offer the same functionality as GoBack. Not only does GoBack not eat up all your hard drive space while creating a legitimate fail safe for any pc problems, it also allows you to see ACTIVELY EXACTLY WHAT PROCESS ARE BEING EXECUTED ON YOUR COMPUTER. This feature (called Advanced Disk Drive Restore) also allows you to troubleshoot problems and determine causes for things in about half a second by seeing what is happening on your machine. It's how I learned everything I know about computers. GoBack also features something called Safe Try Mode where you can put it in SafeTry and then mess up the whole computer and when you come out of it, your computer will be exactly how it was before. Amazing for people who like to tinker without risking their machine stability. It also helps for that accidentally erased paper or whatever you may have erased. I believe GoBack installs a type44 partition around the drive, which loads prior to windows to allow this functionality. If you're going to recommend another program, please don't (unless it does all of the above). I've tried all the competition and nothing is as good. I just want my GoBack to work with 7 :) Any ideas of crazy ways to make this work?

    Read the article

  • Unable to communicate with EWS from Exchange Server

    - by kschieck
    We are currently running a 2 server exchange environment with Edge services on their own. We are in the process of trying to deploy a piece of software that uses the EWS API which has brought me to this form, the software ties into the EWS service and uses it to forward messages (this is failing). Using the software error logs I have found that accessing EWS from the exchange server is not possible. From my work machine and an external address I can type the following https ://webmail.companyname.com/ews/exchange.asmx and be prompted for a username and password, once I enter credentials I get a screen full of information from services.wsdl. The problem is when I try the same URL from the exchange server and get the credentials prompt I cannot get past it. Even with the same credentials that work externally and from my desk it just keeps looping around. Capture from software log (11:41:32.6415 000017e4 System.Net.WebException: The request failed with HTTP status 401: Unauthorized.) I have also found the same results when trying https://webmail.companyname.com/ Autodiscover /Autodiscover.xml . Environment Information Server 2008 STD 64bit Exchange 2007 SP1 Purchased Cert – webmail.companyname.com I have also confirmed that all services have the proper internal and external URL’s. Any help would be appreciated.

    Read the article

  • Powershell Copy-Item fails silently

    - by R W
    I have a powershell 2.0 script running on Windows Server 2008 R2 64bit that copies some Hyper-V .vhd files to another server as a 'backup solution'. The script gets a list of the .vhd's to copy then iterates over that list to copy them using Copy-Item. It also writes some logging info to a file as well. The files are copied to another server (Windows Server 2003 Sp2) into a directory compressed with NTFS compression. One of the files isn't copied. It's relatively big ~ 68Gb. The others are 20Gb or less. The wierd thing is that during the copy process the file appears on the destination server and the log file generated seems to indicate the file is copied due to the difference in the times of the log file entries. I see no error messages on the log file and nothing in the event log of either machine. Here's the code that does the copy. Get-ChildItem $VMSource *.vhd -Recurse | foreach-object { $time = Get-Date -format HH.mm.ss Add-Content $logFileName "$time : File Copy ($_) started" $fullname = $_.FullName Add-Content $logFileName "$time : Copying $fullname to $VMDestination" Copy-Item $fullname $VMDestination -Force -ErrorAction SilentlyContinue -ErrorVariable errors foreach($error in $errors) { if ($error.Exception -ne $null) { Add-Content $logFileName "'tERROR COPYING FILE : $($error.Exception)" } } $time = Get-Date -format HH.mm.ss Add-Content $logFileName "$time : File Copy ($_) finished" } I can only think there's some problem with copying a file that big to a compressed directory maybe? Any ideas?

    Read the article

  • Performance Test and TCP tuning

    - by Mithir
    We are in the process of performance testing an application which receives tcp requests converts them to soap requests (WCF-httpBinding) which other services work on. The server is Windows Server 2008 R2. The TCP requests are received by TcpListener instance (.NET C#). There are 3 http-binded WCF services running on the same server. We have built a performance test client which goal is to simulate multiple concurrent requests(each request has to be different and recognizable by the application). We built a test running 150 requests that run on the same time (by 150 different threads), and we noticed straight away that some requests get the TCP connection slowly, but once they get it, they act fast. A single request writes twice on the same connection- request and an application ack. Although a single request+ack can take about 150ms, the 150 test takes about 7 seconds. The Problem When we try to run this test from 2 different computers we lose requests. some clients requests are getting no connection was made because the target machine actively refused it So I got here and got convinced it was because of the backlog. I changed the TcpListener parameters and did the registry AFD backlog changes written here but it still didn't work, so I inserted all of the TCP tuning suggested plus some netsh commands which were recommended, but still no change, we still get that error. Is there anything else I need to know? Are there any other solutions?

    Read the article

  • Why can't I copy .zip files from a server to a server in a different domain?

    - by Kyralessa
    At work, we're using a Windows Server 2008 R2 VM as our build server. At the end of the build process for any of our projects, we copy the packaged deployment files to a folder on the server where they'll be deployed. (This is done in a batch command by a service account.) For most of our projects, which deploy to a Windows Server 2008 R2 VM, this step goes swimmingly. But for one project, which deploys to a Windows Server 2003 R2 VM which resides in a different domain on our network, the .zip files return "Access is denied" and don't copy, though all of the other files copy correctly. Our sysadmins say they haven't prevented this in group policy or by other means. If I'm logged in the build server as myself and run the copy in the command window, I can't copy the .zip files over either, so it's not just a matter of the service account's permissions. If I log into the 2003 server and then copy from the build server to the 2003 server, using the command window, it works, whether I run as myself or as our service account. Only .zip files cause the "Access is denied" problem. Even a (fake) .exe file copies correctly. All of our other projects have .zip files, and they copy to their 2008 R2 server correctly. Is there a way I can get the Windows Server 2003 R2 VM to accept .zip files copied from our build server?

    Read the article

  • Error in Apache: /var/run/apache2 not found

    - by Julen
    This is more self-answered question but since it drove me crazy I would like to share with the community and maybe someone can tell me why it happened or what it caused. The thing is I wanted to install in my Ubuntu 10.4 machine a CGI app, one built in the samples that come with the gSOAP toolkit. My intention was to access those from ASP .NET machine. Regular Ubuntu does not come with Apache so I install it from Sypnatic. Pretty easy. I followed this How to Install Apache2 webserver with PHP,CGI and Perl Support in Ubuntu Server. Instead of apache.conf I tweaked httpd.conf since a college here used that file instead of the first to put his Apache running. Besides I was able to access his CGI from my ASP .NET but mysteriously I could not from mine, I was getting always "The request failed with HTTP status 503: Service Temporarily Unavailable". Checking Apache error.log I found these messages: No such file or directory: unable to connect to cgi daemon after multiple tries: /home/julen/htdocs/cgi-bin/calcserver And looking more carefully whenever I restarted Apache I got this other message No such file or directory: Couldn't bind unix domain socket /var/run/apache2/cgisock. cgid daemon failed to initialize I am pretty new with Ubuntu and I could not think that Apache and Synaptic made a mistake in the installation process of the server, but it is true that the /var/run/apache2 was missing whereas in my college's computer was not. I tried to find and "elegant" solution but I found a post from 2006 that had an slight reference to it. Finally I decided to create the folder myself (as root) and then everything worked fine. Hope this helps others if they encounter a similar problem. Still I have the doubt why the folders was not created in the first place. Best, Julen.

    Read the article

  • Apache2: How to split out the SSL configuration?

    - by Klaas van Schelven
    In Apache2, I'd like to separately define my SSL-related stuff once, and in a separate file from the rest of the configuration. This is mostly a matter of taste, but it also allows me to include the rest of the configuration in my automatic deployment process. I.e.: current situation: # in file: 0000-ourdomain.com.conf (number needs to be low) <VirtualHost xx.xx.xx.xx:443> # SSL part SSLEngine on SSLCertificateFile ....crt SSLCACertificateFile ...pem SSLCertificateChainFile ...intermediate.pem SSLCertificateKeyFile ....wildcard.ourdomain.com.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown ServerName www.ourdomain.com ServerAlias ourdomain.com # the actual configuration, as found for xx.xx.xx.xx:80, repeated </VirtualHost> I'd like # in file: 0000-ssl-stuff <VirtualHost xx.xx.xx.xx:443> # SSL part SSLEngine on SSLCertificateFile ....crt SSLCACertificateFile ...pem SSLCertificateChainFile ...intermediate.pem SSLCertificateKeyFile ....wildcard.ourdomain.com.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown ServerName www.ourdomain.com ServerAlias ourdomain.com </VirtualHost> # in file: ourdomain.com.conf <VirtualHost xx.xx.xx.xx:443> # the actual configuration, as found for xx.xx.xx.xx:80, repeated </VirtualHost> Unfortunately, this does not seem to work. Apache SSL fails, though it does not give an error message at reload or syntax-check. My best found workaround is to us an Include directive from the 0000-ssl file. Many thanks!

    Read the article

  • Java issues with Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit

    - by Richard
    In trying to install Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit, the dialogue appears as follows. $ ./setup Error : java is not present in path. Please enter JAVAHOME path to pick up java:/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/ Launching installer... Attach to native process failed $ ./setup Error : java is not present in path. Please enter JAVAHOME path to pick up java:/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/lib ./setup: line 80: [: 107:: integer expression expected ./setup: line 83: [: 107:: integer expression expected Error : Incorrect java version (1.2.2 or above is needed). Please enter JAVAHOME path to pick up java: On the server we have the following JREs and I've tried both. $ sudo rpm -qa | egrep "(openjdk|icedtea)" java-1.6.0-openjdk-1.6.0.0-1.27.1.10.8.el5_8 $ find 2>/dev/null | grep -i '/jre/' ./usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre/bin/ ... ./usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/ Any suggestions? I know I'm overlooking something. In previous searches I've only found one other posting that comes close but it has no responses (http://forum.parallels.com/showthread.php?t=76556).

    Read the article

< Previous Page | 641 642 643 644 645 646 647 648 649 650 651 652  | Next Page >