Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 648/971 | < Previous Page | 644 645 646 647 648 649 650 651 652 653 654 655  | Next Page >

  • Where do I learn about IP blocks and subnets? Or is there just a calculator that does it all for me?

    - by cwd
    Amazon's elastic compute tool (among others) requires the ip block format for their command: ec2-authorize websrv -P tcp -p 80 -s 205.192.0.0/16 I may be doing this wrong, but as far as I can tell I need to use the block format even for a single IP address. 1) So, how would I do that for this IP? 71.75.232.132 Several years ago I took a CCNA class, and I remember going over IPs and subnets, masks, broadcast addresses, class a/b/c networks, etc. However a lot seems to have changed since then - for example I don't think you can tell what "class" a network is in just by looking at it anymore - sometimes they could be multiple classes. 2) Anyhow, my second question is where do I go to get a refresher on all these things? 3) Or should I just be using ipcalc or an online calculator to do it all for me - and if so, which one?

    Read the article

  • Which iPhone ad API has produced the highest revenue for you?

    - by Kyle Humfeld
    This isn't a technical question, but more of a request for advice and empirical/anecdotal data. I'm nearly done writing a free app for iPhone, and I'm at the stage where I'm going to put ads into the app. I've had mixed success in the past with iAd (their fill rates have been atrocious recently, and their payouts have cut by about 75% over the past 4 months or so), and would like to know how much ad revenue you, the community, has seen from the various ad APIs you've used for your iPhone apps. This isn't a request for opinion, i.e. which is 'better', only what kinds of numbers you're seeing. I don't need absolute figures, but 'iAd pays x% higher than AdMob, and y% lower than AdSense' would be extremely helpful to me as I make my decision as to which ad API to integrate into my App. Also, have you had any experience or success with integrating multiple ad APIs into the same app? That's something I'm considering doing in my current iAd-filled apps (particularly my iPad app, which has yet to receive a single impression after nearly 60,000 requests)... something like: 1) Request-from-iAd 2) if that fails, request-from-adSense 3) if that fails, request-from-adMob 4) if that fails, ... etc.

    Read the article

  • Which iPhone ad API has produced the highest revenue for you?

    - by Kyle Humfeld
    This isn't a technical question, but more of a request for advice and empirical/anecdotal data. I'm nearly done writing a free app for iPhone, and I'm at the stage where I'm going to put ads into the app. I've had mixed success in the past with iAd (their fill rates have been atrocious recently, and their payouts have cut by about 75% over the past 4 months or so), and would like to know how much ad revenue you, the community, has seen from the various ad APIs you've used for your iPhone apps. This isn't a request for opinion, i.e. which is 'better', only what kinds of numbers you're seeing. I don't need absolute figures, but 'iAd pays x% higher than AdMob, and y% lower than AdSense' would be extremely helpful to me as I make my decision as to which ad API to integrate into my App. Also, have you had any experience or success with integrating multiple ad APIs into the same app? That's something I'm considering doing in my current iAd-filled apps (particularly my iPad app, which has yet to receive a single impression after nearly 60,000 requests)... something like: 1) Request-from-iAd 2) if that fails, request-from-adSense 3) if that fails, request-from-adMob 4) if that fails, ... etc.

    Read the article

  • Bash: Variable substitution in variable name with default value

    - by krissi
    i have the following variables: # config file MYVAR_DEFAULT=123 MYVAR_FOO=456 #MYVAR_BAR unset # program USER_INPUT=FOO TARGET_VAR=<need to be set> If the USER_INPUT is "foo", I want TARGET_VAR to be the value of MYVAR_FOO (TARGET_VAR=456). If USER_INPUT is "bar" I want TARGET_VAR to be set to MYVAR_DEFAULT (123), because MYVAR_BAR is unset. I prefer it to be sh-compatible and as a substitution string. But it might also be bash compatible and/or in a function. I got these snippets: # Default values for variable (sh-compatible) echo ${MYVAR_FOO-$MYVAR_DEFAULT} # Uppercase (bash compatible) echo ${USER_INPUT^^} I would need something like this: TARGET_VAR="${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" # or somecommand -foo "${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" This is to switch a bunch of variables between multiple "profiles". In the example, FOO and BAR are profiles. New profiles should be added easily, in this example there would be an implicit profile named BAZ, too, all variables to their default values. Unfortunately it is not that easy. Do you have an idea to solve this? Thanks in advance, krissi

    Read the article

  • Apache2 alias in virtual host

    - by 0x7c00
    I have multiple virtual host in one server and plan to has some alias setup in one virtualhost. So I add the Alias /foo/ /path/to/foo/ in virtualhost directive,but it has no effect. request of host1/foo/ will return 404. But if I add this to /etc/apache2/mods-available/alias.conf, it works. But the problem is host2 will also share this alias. Is there a way to make the alias work only for host1? B.T.W, I use apache2ctl -l, there's no mod_alias.c listed, weird.

    Read the article

  • ArchBeat Link-o-Rama Top 10 for October 28 - November 3, 2012

    - by Bob Rhubart
    The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of Oct 28 - Nov 3, 2012. Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Mobile Development Platform Strategy Chart: ADF Mobile, WebCenter Sites, Portal, Content and Social "Unlike desktop web focused efforts, the world of mobile has undergone change at a feverish pace," says social enterprise expert John Brunswick. His extensive post charts various resources that will help you keep up. ADF Essentials - The Bare Necessities | Floyd Teter The experiment is over… And now Oracle ACE Director Floyd Teter shares his impressions after spending some time with Oracle ADF Essentials, the free version of Oracle ADF. A review of Oracle SOA Suite 11g Administrator’s Handbook | RedStack "More so than any other single piece of content that I have seen on the topic, it provides the information that a SOA administrator needs to know in order to successfully configure, manage, monitor, troubleshoot and backup an Oracle SOA environment." So says Oracle Fusion Middleware A-Team solution architect Mark Nelson of Oracle SOA Suite 11g Administrator’s Handbook, by Ahmed Aboulnaga and Arun Pareek. Expanding the Oracle Enterprise Repository with functional documentation Capgemini middleware specialist Marc Kuijpers shares information on how Oracle Enterprise Repository can be configured "to contain functional assets, i.e. functional designs, use cases and a logical data model" to aid in SOA governance efforts. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what’s truly valuable. Easy way to access JPA with REST (JSON / XML) | Edwin Biemond Oracle ACE Edwin Biemond shows you "what is possible with JPA-RS, how easy it is and howto setup your own EclipseLink REST service." Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic: when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. 2012 IOUG Virtualization SIG – Online Symposium on Nov 7 and Nov 8 | Kai Yu Oracle ACE Director Kai Yu shares information on this week's IOUG Virtualization SIG online event. Does that make it a virtual virtualization event? Thought for the Day "If McDonalds were run like a software company, one out of every hundred Big Macs would give you food poisoning — and the response would be, 'We’re sorry, here’s a coupon for two more.'" — Mark Minasi Source: SoftwareQuotes.com

    Read the article

  • Can iptables allow Squid to process a request, then redirect the response packets to another port?

    - by Dan H
    I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

    Read the article

  • The SmartAssembly Rearchitecture

    - by Simon Cooper
    You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

  • Word 2013: Get the page number for the previous page

    - by Mike Anthony
    I'm trying to accomplish something very simple in Word 2013, but the feature does not seem to be available, nor can I work it out with field codes. I simply want to include, on multiple pages, "continued from page n". In terms of field codes, I have tried this: { = PAGE - 1 \* MERGEFORMAT } It just tells me that PAGE is not a defined bookmark. Is there any way that this can be done? Edit: Per documentation I found somewhere, I also tried this - but with no luck: { = { PAGE } - 1 } This just threw Syntax Error, { back, which leads me to assume that it's incompatible with newer versions of Word.

    Read the article

  • SQL Server Performance & Latching

    - by Colin
    I have a SQL server 2000 instance which runs several concurrent select statements on a group of 4 or 5 tables. Often the performance of the server during these queries becomes extremely diminished. The querys can take up to 10x as long as other runs of the same query, and it gets to the point where simple operations like getting the table list in object explorer or running sp_who can take several minutes. I've done my best to identify the cause of these issues, and the only performance metric which I've found to be off base is Average Latch Wait time. I've read that over 1 second wait time is bad, and mine ranges anywhere from 20 to 75 seconds under heavy use. So my question is, what could be the issue? Shouldn't SQL be able to handle multiple selects on a single table without losing so much performance? Can anyone suggest somewhere to go from here to investigate this problem? Thanks for the help.

    Read the article

  • Test a simple multi-player (upto four players) Android game in single developer machine

    - by Kush
    I'm working on a multi-player Android game (very simple it is that it doesn't have any game-engine used). The game is based on Java Socket. Four devices will connect the game server and a new thread will manage their session. The game server will server many such sessions (having 4 players each). What I'm worried about is the testing of this game. I know it is possible to run multiple android emulators, but my development laptop is very limited in capabilities (3 GB RAM, 2 Ghz Intel Core2Duo and on-board Graphics). And I'm already using Ubuntu to develop the game so that I have more user memory available than I'd have with Windows. Hence, the laptop will burn-to-death on running 4 emulator instances. I don't have access to any android device, neither I have another machine with higher configuration. And I still have to develop and test this game. P.S. : I'm a CS student, and currently don't work anywhere, and this game is college project, so if there are any paid solutions, I cannot afford it. What can I do to test the app seamlessly? ability to test even only 4 clients (i.e. only 1 session) would suffice, its alright if I can't simulate real environment with some 10-20 active game sessions (having 4 players each).

    Read the article

  • Are there any actual case studies on rewrites of software success/failure rates?

    - by James Drinkard
    I've seen multiple posts about rewrites of applications being bad, peoples experiences about it here on Programmers, and an article I've ready by Joel Splosky on the subject, but no hard evidence of case studies. Other than the two examples Joel gave and some other posts here, what do you do with a bad codebase and how do you decide what to do with it based on real studies? For the case in point, there are two clients I know of that both have old legacy code. They keep limping along with it because as one of them found out, a rewrite was a disaster, it was expensive and didn't really work to improve the code much. That customer has some very complicated business logic as the rewriters quickly found out. In both cases, these are mission critical applications that brings in a lot of revenue for the company. The one that attempted the rewrite felt that they would hit a brick wall at some point if the legacy software didn't get upgraded at some point in the future. To me, that kind of risk warrants research and analysis to ensure a successful path. My question is have there been actual case studies that have investigated this? I wouldn't want to attempt a major rewrite without knowing some best practices, pitfalls, and successes based on actual studies. Aftermath: okay, I was wrong, I did find one article: Rewrite or Reuse. They did a study on a Cobol app that was converted to Java.

    Read the article

  • How can I access my music anywhere?

    - by musicfreak
    So here's the idea: I use multiple computers on an almost daily basis. I would like to be able to access my entire music library from any of those computers through the Internet. Is there a service or perhaps some software that would allow me to host my music "in the cloud", or in some other way access it from a different computer? I've searched for something like this and the closest I've found is the Media Player application found in Opera Unite, but that requires my home computer to be turned on at all times, which is less than ideal. I'm willing to pay, but not so much that I could just rent a private server for a lower price. Thanks in advance.

    Read the article

  • Toggle between open Tabs in Internet Explorer

    - by Kanini
    I have multiple tabs open in IE 8 (OS is Windows 7 Home Premium). Let us name the tabs as T1, T2, T3, ... , T7 I am currently on T7. What do I do if I want to toggle between Tab T4 and T7? Alt + Tab - Switches between different apps that are open. Ctrl + Tab - Cycles through the different tabs that are open in the current Window. What I want is something like we have in Visual Studio. Irrespective of how the documents are opened, a Ctrl + Tab always toggles between the last two files opened. Is it possible in IE 8.0?

    Read the article

  • Windows 2008 Incoming Connection: Where/How is Server IPv4 address defined

    - by revelate
    We're evaluating a VM hosted externally which runs Windows Server 2008 R2 Web Server Edition and wish to access it via a VPN connection for maintenance and administration. RRAS isn't included in Web Server Edition, but it does have a form of VPN server called "Incoming Connections". This appears to work well and even supports multiple simultaneous connections. As we'll be using this VPN regularly we'd like to know if this is a viable solution or if we'd be better off upgrading to Standard Edition and full-fledged RRAS. In particular we're accessing the VM via the Private IP given by the Incoming Connection (currently 169.254.135.207) so we'd like know: if the server private IP might change every so often? if so is there any way to define it manually? or should we be using the server name rather than the private IP address? if so how can we be sure that it will resolve correctly? Name resolution over the "Incoming Connection" has worked on and off during our tests. Thanks for your help

    Read the article

  • Is a Model Driven Architecture in Language Oriented Programming (MPS) feasible at this time

    - by Steven Jeuris
    As a side project I am developing some sort of DSL where I describe a data model, and generate desired code files from it. I believe this is called Model Driven Architecture. My partial existing implementation uses C#, CodeDOM, XML and XSLT to do this manually. I discovered there already exist better environments to do this in. The one which fascinated me the most is called MPS, which follows the Language Oriented Programming paradigm. This article, written by a cofounder of JetBrains was a real eye opener for me. I truly believe LOP has a very good chance of becoming the next big programming paradigm once it has broader support. From my short experience with MPS, I noticed it is still mainly Java-oriented. My question is, how feasible is it to generate code files for other (multiple) languages instead of just Java. I don't need full language support from the start, so preferably, I need to be able to implement a language in a agile way. E.g. first support only one type, add access modifiers, ... Perhaps some other (free) environment already provides this out of the box. P.S.: I find it important to have a lot of control over the naming conventions and such of the generated code. This is one of the reasons why I started my own implementation.

    Read the article

  • How do I perform multi-window operations on a non-combined group of windows in Windows 7?

    - by BACON
    With multiple windows/instances of an application open and the taskbar buttons set to "Always combine, hide labels", I can Shift + right-click the taskbar button for the window group to open a menu allowing me to "Cascade", "Show windows stacked", "Show windows side by side", "Restore all windows", "Minimize all windows", or "Close all windows". With the taskbar buttons set to "Combine when taskbar is full" or "Never combine", when I right-click, Shift + right-click, or Ctrl + right-click either the button or the Aero preview for a window in the group I get a menu allowing me to perform window operations on just that one window rather than each window in the group. When I have a non-combined group of windows in the taskbar, how would I cascade, stack, etc. that group of windows?

    Read the article

  • WoW lua: Getting quest attributes before the QUEST_DETAIL event

    - by Matt DiTrolio
    I'd like to determine the attributes of a quest (i.e., information provided by functions such as QuestIsDaily and IsQuestCompletable) before the player clicks on the quest detail. I'm trying to write an add-on that handles accepting and completing of daily quests with a single click on the NPC, but I'm running into a problem whereby I can't find out anything about a given quest unless the quest text is currently being displayed, defeating the purpose of the add-on. Other add-ons of this nature seem to be getting around this limitation by hard-coding information about quests, an approach I don't much like as it requires constant maintenance. It seems to me that this information must be available somehow, as the game itself can properly figure out which icon to display over the head of the NPC without player interaction. The only question is, are add-on authors allowed access to this information? If so, how? EDIT: What I originally left out was that the situations I'm trying to address are when: An NPC has multiple quests The quest detail is not the first thing that shows up upon right-click Otherwise, the situation is much simpler, as I have the information I need provided immediately.

    Read the article

  • Code Reuse is (Damn) Hard

    - by James Michael Hare
    Being a development team lead, the task of interviewing new candidates was part of my job.  Like any typical interview, we started with some easy questions to get them warmed up and help calm their nerves before hitting the hard stuff. One of those easier questions was almost always: “Name some benefits of object-oriented development.”  Nearly every time, the candidate would chime in with a plethora of canned answers which typically included: “it helps ease code reuse.”  Of course, this is a gross oversimplification.  Tools only ease reuse, its developers that ultimately can cause code to be reusable or not, regardless of the language or methodology. But it did get me thinking…  we always used to say that as part of our mantra as to why Object-Oriented Programming was so great.  With polymorphism, inheritance, encapsulation, etc. we in essence set up the concepts to help facilitate reuse as much as possible.  And yes, as a developer now of many years, I unquestionably held that belief for ages before it really struck me how my views on reuse have jaded over the years.  In fact, in many ways Agile rightly eschews reuse as taking a backseat to developing what's needed for the here and now.  It used to be I was in complete opposition to that view, but more and more I've come to see the logic in it.  Too many times I've seen developers (myself included) get lost in design paralysis trying to come up with the perfect abstraction that would stand all time.  Nearly without fail, all of these pieces of code become obsolete in a matter of months or years. It’s not that I don’t like reuse – it’s just that reuse is hard.  In fact, reuse is DAMN hard.  Many times it is just a distraction that eats up architect and developer time, and worse yet can be counter-productive and force wrong decisions.  Now don’t get me wrong, I love the idea of reusable code when it makes sense.  These are in the few cases where you are designing something that is inherently reusable.  The problem is, most business-class code is inherently unfit for reuse! Furthermore, the code that is reusable will often fail to be reused if you don’t have the proper framework in place for effective reuse that includes standardized versioning, building, releasing, and documenting the components.  That should always be standard across the board when promoting reusable code.  All of this is hard, and it should only be done when you have code that is truly reusable or you will be exerting a large amount of development effort for very little bang for your buck. But my goal here is not to get into how to reuse (that is a topic unto itself) but what should be reused.  First, let’s look at an extension method.  There’s many times where I want to kick off a thread to handle a task, then when I want to reign that thread in of course I want to do a Join on it.  But what if I only want to wait a limited amount of time and then Abort?  Well, I could of course write that logic out by hand each time, but it seemed like a great extension method: 1: public static class ThreadExtensions 2: { 3: public static bool JoinOrAbort(this Thread thread, TimeSpan timeToWait) 4: { 5: bool isJoined = false; 6:  7: if (thread != null) 8: { 9: isJoined = thread.Join(timeToWait); 10:  11: if (!isJoined) 12: { 13: thread.Abort(); 14: } 15: } 16: return isJoined; 17: } 18: } 19:  When I look at this code, I can immediately see things that jump out at me as reasons why this code is very reusable.  Some of them are standard OO principles, and some are kind-of home grown litmus tests: Single Responsibility Principle (SRP) – The only reason this extension method need change is if the Thread class itself changes (one responsibility). Stable Dependencies Principle (SDP) – This method only depends on classes that are more stable than it is (System.Threading.Thread), and in itself is very stable, hence other classes may safely depend on it. It is also not dependent on any business domain, and thus isn't subject to changes as the business itself changes. Open-Closed Principle (OCP) – This class is inherently closed to change. Small and Stable Problem Domain – This method only cares about System.Threading.Thread. All-or-None Usage – A user of a reusable class should want the functionality of that class, not parts of that functionality.  That’s not to say they most use every method, but they shouldn’t be using a method just to get half of its result. Cost of Reuse vs. Cost to Recreate – since this class is highly stable and minimally complex, we can offer it up for reuse very cheaply by promoting it as “ready-to-go” and already unit tested (important!) and available through a standard release cycle (very important!). Okay, all seems good there, now lets look at an entity and DAO.  I don’t know about you all, but there have been times I’ve been in organizations that get the grand idea that all DAOs and entities should be standardized and shared.  While this may work for small or static organizations, it’s near ludicrous for anything large or volatile. 1: namespace Shared.Entities 2: { 3: public class Account 4: { 5: public int Id { get; set; } 6:  7: public string Name { get; set; } 8:  9: public Address HomeAddress { get; set; } 10:  11: public int Age { get; set;} 12:  13: public DateTime LastUsed { get; set; } 14:  15: // etc, etc, etc... 16: } 17: } 18:  19: ... 20:  21: namespace Shared.DataAccess 22: { 23: public class AccountDao 24: { 25: public Account FindAccount(int id) 26: { 27: // dao logic to query and return account 28: } 29:  30: ... 31:  32: } 33: } Now to be fair, I’m not saying there doesn’t exist an organization where some entites may be extremely static and unchanging.  But at best such entities and DAOs will be problematic cases of reuse.  Let’s examine those same tests: Single Responsibility Principle (SRP) – The reasons to change for these classes will be strongly dependent on what the definition of the account is which can change over time and may have multiple influences depending on the number of systems an account can cover. Stable Dependencies Principle (SDP) – This method depends on the data model beneath itself which also is largely dependent on the business definition of an account which can be very inherently unstable. Open-Closed Principle (OCP) – This class is not really closed for modification.  Every time the account definition may change, you’d need to modify this class. Small and Stable Problem Domain – The definition of an account is inherently unstable and in fact may be very large.  What if you are designing a system that aggregates account information from several sources? All-or-None Usage – What if your view of the account encompasses data from 3 different sources but you only care about one of those sources or one piece of data?  Should you have to take the hit of looking up all the other data?  On the other hand, should you have ten different methods returning portions of data in chunks people tend to ask for?  Neither is really a great solution. Cost of Reuse vs. Cost to Recreate – DAOs are really trivial to rewrite, and unless your definition of an account is EXTREMELY stable, the cost to promote, support, and release a reusable account entity and DAO are usually far higher than the cost to recreate as needed. It’s no accident that my case for reuse was a utility class and my case for non-reuse was an entity/DAO.  In general, the smaller and more stable an abstraction is, the higher its level of reuse.  When I became the lead of the Shared Components Committee at my workplace, one of the original goals we looked at satisfying was to find (or create), version, release, and promote a shared library of common utility classes, frameworks, and data access objects.  Now, of course, many of you will point to nHibernate and Entity for the latter, but we were looking at larger, macro collections of data that span multiple data sources of varying types (databases, web services, etc). As we got deeper and deeper in the details of how to manage and release these items, it quickly became apparent that while the case for reuse was typically a slam dunk for utilities and frameworks, the data access objects just didn’t “smell” right.  We ended up having session after session of design meetings to try and find the right way to share these data access components. When someone asked me why it was taking so long to iron out the shared entities, my response was quite simple, “Reuse is hard...”  And that’s when I realized, that while reuse is an awesome goal and we should strive to make code maintainable, often times you end up creating far more work for yourself than necessary by trying to force code to be reusable that inherently isn’t. Think about classes the times you’ve worked in a company where in the design session people fight over the best way to implement a class to make it maximally reusable, extensible, and any other buzzwordable.  Then think about how quickly that design became obsolete.  Many times I set out to do a project and think, “yes, this is the best design, I can extend it easily!” only to find out the business requirements change COMPLETELY in such a way that the design is rendered invalid.  Code, in general, tends to rust and age over time.  As such, writing reusable code can often be difficult and many times ends up being a futile exercise and worse yet, sometimes makes the code harder to maintain because it obfuscates the design in the name of extensibility or reusability. So what do I think are reusable components? Generic Utility classes – these tend to be small classes that assist in a task and have no business context whatsoever. Implementation Abstraction Frameworks – home-grown frameworks that try to isolate changes to third party products you may be depending on (like writing a messaging abstraction layer for publishing/subscribing that is independent of whether you use JMS, MSMQ, etc). Simplification and Uniformity Frameworks – To some extent this is similar to an abstraction framework, but there may be one chosen provider but a development shop mandate to perform certain complex items in a certain way.  Or, perhaps to simplify and dumb-down a complex task for the average developer (such as implementing a particular development-shop’s method of encryption). And what are less reusable? Application and Business Layers – tend to fluctuate a lot as requirements change and new features are added, so tend to be an unstable dependency.  May be reused across applications but also very volatile. Entities and Data Access Layers – these tend to be tuned to the scope of the application, so reusing them can be hard unless the abstract is very stable. So what’s the big lesson?  Reuse is hard.  In fact it’s damn hard.  And much of the time I’m not convinced we should focus too hard on it. If you’re designing a utility or framework, then by all means design it for reuse.  But you most also really set down a good versioning, release, and documentation process to maximize your chances.  For anything else, design it to be maintainable and extendable, but don’t waste the effort on reusability for something that most likely will be obsolete in a year or two anyway.

    Read the article

  • What should I expect from a system engineer university career

    - by Trufa
    I'm starting tomorrow a series of interviews to decide which university should I choose to get a degree in System Engineer. I know this is a serious university but I would like to get some feedback about what should I expect or "demand" from the university. My experience in the technology field is (obviously) limited and would like to be aware of what should I to be aware if the university might be good or not. Specially in following fields: Infrastructure: what are the essentials? big pluses? Theoretical vs Practical: how practical should it be? what is a "good" mix? Programming languages, frameworks, etc: Which are the ideal for learning? Most demand? Latest technologies: What should they be teaching right know to "prove" they are up to date. Qualification system: What exam methods do you think are ideal for this kind of degree, good ol' Q&A, multiple choice, projects, a fair mix? What other points do you think I should care about? What isn't important? Thanks in advance. I realize this is might be a very subjective topic so I tried to make it as specific and on topic as I could but any recommendations are of course welcome. I also understand that none of this questions will guarantee this will be a good university but it might give me another reference as to which should I choose when the moment comes.

    Read the article

  • When to use Aspect Oriented Architecture (AOA/AOD)

    When is it appropriate to use aspect oriented architecture? I think the only honest answer to this question is that it depends on the context for which the question is being asked. There really are no hard and fast rules regarding the selection of an architectural model(s) for a project because each model provides good and bad benefits. Every system is built with a unique requirements and constraints. This context will dictate when to use one type of architecture over another or in conjunction with others. To me aspect oriented architecture models should be a sub-phase in the architectural modeling and design process especially when creating enterprise level models. Personally, I like to use this approach to create a base architectural model that is defined by non-functional requirements and system quality attributes.   This general model can then be used as a starting point for additional models because it is targets all of the business key quality attributes required by the system.Aspect oriented architecture is a method for modeling non-functional requirements and quality attributes of a system known as aspects. These models do not deal directly with specific functionality. They do categorize functionality of the system. This approach allows a system to be created with a strong emphasis on separating system concerns into individual components. These cross cutting components enables a systems to create with compartmentalization in regards to non-functional requirements or quality attributes.  This allows for the reduction in code because an each component maintains an aspect of a system that can be called by other aspects. This approach also allows for a much cleaner and smaller code base during the implementation and support of a system. Additionally, enabling developers to develop systems based on aspect-oriented design projects will be completed faster and will be more reliable because existing components can be shared across a system; thus, the time needed to create and test the functionality is reduced.   Example of an effective use of Aspect Oriented ArchitectureIn my experiences, aspect oriented architecture can be very effective with large or more complex systems. Typically, these types of systems have a large number of concerns so the act of defining them is very beneficial for reducing the system’s complexity because components can be developed to address each concern while exposing functionality to the other system components. The benefits to using the aspect oriented approach as the starting point for a system is that it promotes communication between IT and the business due to the fact that the aspect oriented models are quality attributes focused so not much technical understanding is needed to understand the model.An example of this can be in developing a new intranet website. Common Intranet Concerns: Error Handling Security Logging Notifications Database connectivity Example of a not as effective use of Aspect Oriented ArchitectureAgain in my experiences, aspect oriented architecture is not as effective with small or less complex systems in comparison.  There is no need to model concerns for a system that has a limited amount of them because the added overhead would not be justified for the actual benefits of creating the aspect oriented architecture model.  Furthermore, these types of projects typically have a reduced time schedule and a limited budget.  The creation of the Aspect oriented models would increase the overhead of a project and thus increase the time needed to implement the system. An example of this is seen by creating a small application to poll a network share for new files and then FTP them to a new location.  The two primary concerns for this project is to monitor a network drive and FTP files to a new location.  There is no need to create an aspect model for this system because there will never be a need to share functionality amongst either of these concerns.  To add to my point, this system is so small that it could be created with just a few classes so the added layer of componentizing the concerns would be complete overkill for this situation. References:Brichau, Johan; D'Hondt, Theo. (2006) Aspect-Oriented Software Development (AOSD) - An Introduction. Retreived from: http://www.info.ucl.ac.be/~jbrichau/courses/introductionToAOSD.pdf

    Read the article

  • Render on other render targets starting from one already rendered on

    - by JTulip
    I have to perform a double pass convolution on a texture that is actually the color attachment of another render target, and store it in the color attachment of ANOTHER render target. This must be done multiple time, but using the same texture as starting point What I do now is (a bit abstracted, but what I have abstract is guaranteed to work singularly) renderOnRT(firstTarget); // This is working. for each other RT currRT{ glBindFramebuffer(GL_FRAMEBUFFER, currRT.frameBufferID); programX.use(); glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, firstTarget.colorAttachmentID); programX.setUniform1i("colourTexture",0); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, firstTarget.depthAttachmentID); programX.setUniform1i("depthTexture",1); glBindBuffer(GL_ARRAY_BUFFER, quadBuffID); // quadBuffID is a VBO for a screen aligned quad. It is fine. programX.vertexAttribPointer(POSITION_ATTRIBUTE, 3, GL_FLOAT, GL_FALSE, 0, (void*)0); glDrawArrays(GL_QUADS,0,4); programY.use(); glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, currRT.colorAttachmentID); // The second pass is done on the previous pass programY.setUniform1i("colourTexture",0); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, currRT.depthAttachmentID); programY.setUniform1i("depthTexture",1); glBindBuffer(GL_ARRAY_BUFFER, quadBuffID); programY.vertexAttribPointer(POSITION_ATTRIBUTE, 3, GL_FLOAT, GL_FALSE, 0, (void*)0); glDrawArrays(GL_QUADS, 0, 4); } The problem is that I end up with black textures and not the wanted result. The GLSL programs program(X,Y) works fine, already tested on single targets. Is there something stupid I am missing? Even an hint is much appreciated, thanks!

    Read the article

  • Sync Google Contacts with QuickBooks

    - by dataintegration
    The RSSBus ADO.NET Providers offer an easy way to integrate with different data sources. In this article, we include a fully functional application that can be used to synchronize contacts between Google and QuickBooks. Like our QuickBooks ADO.NET Provider, the included application supports both the desktop versions of QuickBooks and QuickBooks Online Edition. Getting the Contacts Step 1: Google accounts include a number of contacts. To obtain a list of a user's Google Contacts, issue a query to the Contacts table. For example: SELECT * FROM Contacts. Step 2: QuickBooks stores contact information in multiple tables. Depending on your use case, you may want to synchronize your Google Contacts with QuickBooks Customers, Employees, Vendors, or a combination of the three. To get data from a specific table, issue a SELECT query to that table. For example: SELECT * FROM Customers Step 3: Retrieving all results from QuickBooks may take some time, depending on the size of your company file. To narrow your results, you may want to use a filter by including a WHERE clause in your query. For example: SELECT * FROM Customers WHERE (Name LIKE '%James%') AND IncludeJobs = 'FALSE' Synchronizing the Contacts Synchronizing the contacts is a simple process. Once the contacts from Google and the customers from QuickBooks are available, they can be compared and synchronized based on user preference. The sample application does this based on user input, but it is easy to create one that does the synchronization automatically. The INSERT, UPDATE, and DELETE statements available in both data providers makes it easy to create, update, or delete contacts in either data source as needed. Pre-Built Demo Application The executable for the demo application can be downloaded here. Note that this demo is built using BETA builds of the ADO.NET Provider for Google V2 and ADO.NET Provider for QuickBooks V3, and will expire in 2013. Source Code You can download the full source of the demo application here. You will need the Google ADO.NET Data Provider V2 and the QuickBooks ADO.NET Data Provider V3, which can be obtained here.

    Read the article

  • How can I synchronize Google contacts and calendar with Palm Centro and Outlook 2000?

    - by meomaxy
    Seeking a free solution to synchronize my calendar and contacts between my Palm Centro and Google contacts and calendar. I currently sync my Palm contacts and calendar with Outlook 2000 on Windows XP. Google Calendar Sync does not support Outlook 2000, and I would rather not pay to upgrade Outlook just for this, as I don't even use Outlook much anymore. I wouldn't mind migrating my calendar and contacts off of it, as long as I can still sync with the Palm. I don't have an unlimited data plan for my Centro, so I can't use a solution that wirelessly syncs directly to Google. I have set up GCALDaemon to sync up my Google calendar with multiple machines running Rainlendar, but I have not yet figured out a way to synchronize that data with the Palm.

    Read the article

< Previous Page | 644 645 646 647 648 649 650 651 652 653 654 655  | Next Page >