Search Results

Search found 2742 results on 110 pages for 'paypal gateway'.

Page 65/110 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Bridging a non-persistent PPP connection to wireless (or wired) in Windows XP

    - by phooze
    I have a 3G modem-like device (eMobile's D01NX, PC card style, for any Japan nerds out there) that I use to connect my PC to the Internet. I'd like to bridge this connection with another computer either via an ad-hoc wireless network, or a simple cross-over cable (either are options). However, when I open "Network Connections", I do not see the PPP connection (otherwise I could click both and bridge). I believe this is because there is software (provided by the vendor) that is handling the card directly and registering a PPP connection dynamically. When connected, an ipconfig at the command line yields: Ethernet adapter wireless: Connection-specific DNS Suffix . : Autoconfiguration IP Address. . . : 169.254.5.169 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter lan: Media State . . . . . . . . . . . : Media disconnected PPP adapter {B59EEDDE-A22B-48DF-93E5-04842B641257}: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 114.xx.xxx.xx Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 114.xx.xxx.xx (I've commented out my IP address for privacy reasons, but what does appear there is a functional Internet IP address.) When I disconnect the adapter with the vendor software, the PPP connection disappears completely from the ipconfig list. Any ideas on how to do this?

    Read the article

  • iptables rule(s) to send openvpn traffic from clients over an sshuttle tunnel?

    - by Sam Martin
    I have an Ubuntu 12.04 box with OpenVPN. The VPN is working as expected -- clients can connect, browse the Web, etc. The OpenVPN server IP is 10.8.0.1 on tun0. On that same box, I can use sshuttle to tunnel into another network to access a Web server on 10.10.0.9. sshuttle does its magic using the following iptables commands: iptables -t nat -N sshuttle-12300 iptables -t nat -F sshuttle-12300 iptables -t nat -I OUTPUT 1 -j sshuttle-12300 iptables -t nat -I PREROUTING 1 -j sshuttle-12300 iptables -t nat -A sshuttle-12300 -j REDIRECT --dest 10.10.0.0/24 -p tcp --to-ports 12300 -m ttl ! --ttl 42 iptables -t nat -A sshuttle-12300 -j RETURN --dest 127.0.0.0/8 -p tcp Is it possible to forward traffic from OpenVPN clients over the sshuttle tunnel to the remote Web server? I'd ultimately like to be able to set up any complicated tunneling on the server, and have relatively "dumb" clients (iPad, etc.) be able to access the remote servers via OpenVPN. Below is a basic diagram of the scenario: [Edit: added output from the OpenVPN box] $ sudo iptables -nL -v -t nat Chain PREROUTING (policy ACCEPT 1498 packets, 252K bytes) pkts bytes target prot opt in out source destination 1512 253K sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 322 packets, 58984 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 584 packets, 43241 bytes) pkts bytes target prot opt in out source destination 587 43421 sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain POSTROUTING (policy ACCEPT 589 packets, 43595 bytes) pkts bytes target prot opt in out source destination 1175 76298 MASQUERADE all -- * eth0 10.8.0.0/24 0.0.0.0/0 Chain sshuttle-12300 (2 references) pkts bytes target prot opt in out source destination 17 1076 REDIRECT tcp -- * * 0.0.0.0/0 10.10.0.0/24 TTL match TTL != 42 redir ports 12300 0 0 RETURN tcp -- * * 0.0.0.0/0 127.0.0.0/8 $ sudo iptables -nL -v -t filter Chain INPUT (policy ACCEPT 97493 packets, 30M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 131K 109M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1370 89160 ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable [Edit 2: more OpenVPN server output] $ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 [Edit 3: still more debug output] IP forwarding appears to be enabled correctly on the OpenVPN server: # find /proc/sys/net/ipv4/conf/ -name forwarding -ls -execdir cat {} \; 18926 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/all/forwarding 1 18954 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/default/forwarding 1 18978 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/eth0/forwarding 1 19003 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/lo/forwarding 1 19028 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/tun0/forwarding 1 Client routing table: $ netstat -r Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 8 48 tun0 default 192.168.1.1 UGSc 2 1652 en1 10.8.0.1/32 10.8.0.5 UGSc 1 0 tun0 10.8.0.5 10.8.0.6 UHr 13 0 tun0 10.10.0/24 10.8.0.5 UGSc 0 0 tun0 <snip> Traceroute from client: $ traceroute 10.10.0.9 traceroute to 10.10.0.9 (10.10.0.9), 64 hops max, 52 byte packets 1 10.8.0.1 (10.8.0.1) 5.403 ms 1.173 ms 1.086 ms 2 192.168.1.1 (192.168.1.1) 4.693 ms 2.110 ms 1.990 ms 3 l100.my-verizon-garbage (client-ext-ip) 7.453 ms 7.089 ms 6.248 ms 4 * * * 5 10.10.0.9 (10.10.0.9) 14.915 ms !N * 6.620 ms !N

    Read the article

  • How to use a different Ethernet connection

    - by SteveC
    I'm running a virtual machine at home which has a VPN connection to our main office, but I also want to connect to a share on another machine at home. When I check with IPCONFIG I can see two ethernet connections ... my work VPN ... Ethernet adapter Local Area Connection* 11: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : XXX.XXX.XXX.XXX Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.XXX.XXX.XXX and home local ... Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : lan Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : 192.168.1.70 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : What's weird is when I've been working before with a plugged-in ethernet cable I've not had any problem getting to the share? I can PING the other machine, but I can't access the share at ... \\othermachine\c$ I tried 'TRACERT` but that disappears off to the work network and eventually gets back to the local other machine after a few time-outs Is there anyway to "force" the connection to stay local ? UPDATE: the VPN is AEP SSL Tunnel

    Read the article

  • Can't capture https traffic with Fiddler and Firefox (works with IE)

    - by Tony_Henrich
    I am trying to debug an asp.net app using Firefox. Firefox tries to connect to https://www.paypal.com and I get "Secure Connection Failed" error (Error code: sec_error_bad_signature). I installed Fiddler's cert in Firefox and the local computer and current user Cert stores. I set up the manual proxy in FF to 127.0.0.1 and port 8888 and for all protocols. Fiddler captures http traffic but gives an error with https traffic. Fiddler captures https from IE fine. What's the problem? (Is FiddlerHook FF extension needed and what setting should it be using: auto, disabled or Force traffic to Fiddler?)

    Read the article

  • Java Generics, JPA 2, J2EE, JSF 2, GWT, Ajax, Oracle's Java Strategies, Flex, iPhone, Agile ALM, Gra

    - by Kim Won
    Great Indian Developer Summit 2010 – India's Biggest Polyglot Conference and Workshops for IT Software Professionals Bangalore, April 9, 2010: The GIDS.Java Conference and Workshops has announced the complete program of over 50 sessions on the present and future of the Java language and VM, how they are evolving to meet the community's ever-changing needs, and some of the cutting-edge tools, technologies & techniques used for building robust enterprise Java applications today. The GIDs.Java track at Great Indian Developer Summit takes place 22 and 23 April 2010, at the Indian Institute of Science in Bangalore. As one of the longest running independent developer conferences in India, GIDS.Java at the Great Indian Developer Summit 2010 is uniquely positioned to provide a blend of practical, pragmatic and immediately applicable knowledge and a glimpse of the future of technology. During 22 and 23 April 2010, GIDS.Java offers a multi-track conference, workshops, expo show floor, and networking opportunities. The first keynote at GIDS.Java "Pointy Haired Bosses and Pragmatic Programmers" is led by Dr. Venkat Subramaniam. He speaks about how each of us has a professional responsibility to be objective and make decisions that will help us and our teams be productive and deliver results. Venkat will pick on some fallacies, lay down facts, and discuss how to stay professional and objective in our daily efforts. The second keynote of the day explains the practical features that make the Cloud so interesting, and why everyone should start using it in their everyday life. Simone Brunozzi, Amazon Web Services Technology Evangelist, will detail technical examples, business details all mixed with a lot of Italian humor to ensure audience enjoy this talk without a single line of code. The third keynote of the day gives an exciting overview of directions in the Java space for Oracle, featuring concrete signs of Oracles heavy investment, a clear concise strategy overview, and deep dives into some of the most interesting pieces of technology being developed in the Java Platform Group today; such as JavaEE, JDK7, JavaFX, and our exciting new visual tools. Featuring demos by a Java evangelism team star, Simon Ritter, this talk takes you top to bottom in Java Technology. Featured talks at GID.Web include: Good, Bad, and Ugly of Java Generics, Venkat Subramaniam Pure Java Ajax: An Overview of GWT 2.0, Marty Hall How JPA 2.0 Makes a Good Thing Even Better, Mike Keith Building Enterprise RIAs with Adobe Flex and Java, Sujit Reddy G Integrated Ajax Support in JSF 2.0, Marty Hall Design Patterns in Java and Groovy, Venkat Subramaniam A Gentle Introduction to iPhone and Obj-C for Java Developers, Matthew McCullough Cloud Computing: Azure for Java Developers, Janakiram MSV Ajax Support in the Prototype JavaScript Library, Marty Hall First steps to IT Heaven Through the Cloud. Part III: .Java, Simone Brunozi Building Web 2.0 User Interfaces for Web Service Models using JSF, Frank Nimphius and Jobinesh P Acceptance Test Driven Development, John Tobin and Mohammed Mohsinali Architecting Your Java Applications for the Cloud, Praveen Srivatsa Effective Java, Venkat Subramaniam The Amazing Groovy Weight-loss Plan, Scott Davis Enterprise Modeling - from Conceptual Planning to Technical Blueprints, J Sripad Java Collections Renaissance, Donald Raab and Vlad Zakharov Power 7 and IBM J9VM, Himanshu Goyal A Whistle-stop Tour of Maven 3.0, Matthew McCullough Mass Volume Opportunities for Java Developers, Jouko Nuottila Emerging Technology Complex Event Processing, Duvvuri Srinivas Agile ALM for Distributed Development, Karthi Swaminathan Dim Sum Grails - A Sampler of Practical Non Database-Driven Grails Applications, Scott Davis Diagnosing Performance Bottlenecks in J2EE, Deepak Kaul Business Driven Identity Management, Suneet Agera Combining Java EE with OSGi using Eclipse Gemini, Mike Keith Workshop: Essence of Functional Programming, Venkat Subramaniam Workshop: Agile Development, Tools, and Teams and Scrum Certification, Stephen Forte Workshop: Cloud Computing Boot Camp on the Google App Engine, Matthew McCullough Workshop: Building Your First Amazon App, Simone Brunozzi Workshop: The 180-min AJAX and JSON Spike Class, Scott Davis Workshop: PHP + Adobe Flex = Killer RIA, Shyamprasad P Workshop: User Expereince Evaluation Model Walkthrough, Sanna Häiväläinen Workshop: Building Data Centric Applications using Adobe Flex and Java, Prashant Singh Workshop: Monetizing your Apps with PayPal X Payments Platform, Khurram Khan, Praveen Alavilli Sponsors of Great Indian Developer Summit 2010 include: Platinum sponsors Microsoft, Oracle Forum Nokia and Adobe; Gold sponsors Intel and SAP; Silver sponsors Quest Software, PayPal, Telerik and AMT. About Great Indian Developer Summit Great Indian Developer Summit is the gold standard for India's software developer ecosystem for gaining exposure to and evaluating new projects, tools, services, platforms, languages, software and standards. Packed with premium knowledge, action plans and advise from been-there-done-it veterans, creators, and visionaries, the 2010 edition of Great Indian Developer Summit features focused sessions, case studies, workshops and power panels that will transform you into a force to reckon with. Featuring 3 co-located conferences: GIDS.NET, GIDS.Web, GIDS.Java and an exclusive day of in-depth tutorials - GIDS.Workshops, from 20 April to 24 April at the IISc campus in Bangalore. At GIDS you'll participate in hundreds of sessions encompassing the full range of Microsoft computing, Java, Agile, RIA, Rich Web, open source/standards, languages, frameworks and platforms, practical tutorials that deep dive into technical skill and best practices, inspirational keynote presentations, an Expo Hall featuring dozens of the latest projects and products activities, engaging networking events, and the interact with the best and brightest of speakers from around the world. For further information on GIDS 2010, please visit the summit on the web http://www.developersummit.com/ A Saltmarch Media Press Release E: [email protected] Ph: +91 80 4005 1000

    Read the article

  • Ajax, Lizard Brain Web Design, JSF, Struts, JavaScript, Mobile Web, Flash, jQuery, GWT, Harmony at I

    - by Kim Won
    Great Indian Developer Summit 2010 – India's Biggest Polyglot Conference and Workshops for IT Software Professionals Bangalore, April 9, 2010: The GIDS.Web Conference and Workshops has announced the complete program of over 30 sessions on how browser and rich web technologies such as AJAX, DHTML, Mashups, Web 2.0, Enterprise 2.0 technologies, and Rich UI technologies are making money and gaining market-share for some of the leading businesses in the world. The GIDS.Web track at Great Indian Developer Summit takes place 21 and 23 April 2010, at the Indian Institute of Science in Bangalore. As one of the longest running independent developer conferences in India, GIDS.Web at the Great Indian Developer Summit 2010 is uniquely positioned to provide a blend of practical, pragmatic and immediately applicable knowledge and a glimpse of the future of technology. During 21 and 23 April 2010, GIDS.Web offers a multi-track conference, workshops, expo show floor, and networking opportunities. The first keynote at GIDS.Web is led by the leading Java EE and Ajax developer, speaker, and author Marty Hall. The best of India's Java and RIA programmers have learnt the subject from Marty's seminal books Core Servlets and JavaServer Pages (first and second editions), More Servlets and JavaServer Pages, and Core Web Programming (first and second editions) from Prentice Hall and Sun Microsystems Press. Marty's keynote address is a comparison of approaches to building rich Internet applications with Ajax. Marty says Ajax development is difficult, and there are several fundamentally different strategies to building Ajaxified Web applications. The keynote address will survey the three most important of these approaches: using an Ajax-enabled JavaScript library such as jQuery, Prototype, Scriptaculous, Dojo, or Ext/JS; using a Web framework such as JSF 2.0 or Struts 2 that has integrated Ajax support; using the Google Web Toolkit (GWT) to build "pure Java" Ajax applications. The talk will compare and contrast these three approaches, discussing the types of applications that fit best for each option. Over the course of the summit Marty will conduct several more sessions on "Choosing an Ajax/JavaScript Toolkit: A Comparison of the Most Popular JavaScript Libraries", "Pure Java Ajax: An Overview of GWT 2.0", "Integrated Ajax Support in JSF 2.0" and "Ajax Support in the Prototype JavaScript Library". The second keynote by the head of Adobe's Flash initiative in India, Ramesh Srinivasaraghavan, explores the state of art in web application development and identify trends that could transform the way we create and use web applications. The talk explains how the Adobe Flash Platform has fuelled this revolution with an integrated set of technologies for delivering the most compelling applications, content and video to the widest possible audience. The Director of Forum Nokia will explain how cloud computing coupled with mobile applications enable consumers to have access to powerful services and improved user experiences never before thought possible. IEEE's 2010 President-Elect Sorel Reisman's afternoon address steps to improve the IT profession in India. Featured talks at GID.Web also include: Web 2.0 Checklist - Deconstructing Modern Websites, Scott Davis Choosing an Ajax/JavaScript Toolkit: Comparison of Popular JavaScript Libraries, Marty Hall Lizard Brain Web Design, Scott Davis Effective Design Processes and Resources for Mobile Web Development, Arabella David NoSQL: The Shift to a Non-relational World, Nosh Petigara Open Source Web Debugging Tools, Matthew McCullough Building Line of Business Applications with Silverlight 4.0, Stephen Forte Hadoop - Divide and Conquer, Matthew McCullough Adobe Flash Catalyst for Agile Interaction Design, Harish Sivaramakrishnan Using jQuery and AJAX to Build Front-ends for ASP.NET and ASP.NET MVC, Pandurang Nayak First Steps to IT Heaven Through the Cloud. Part II: .WEB, Simone Brunozzi Building Rich Internet Applications with SL RIA Web Services, Pandurang Nayak Enriching Cloud Applications with Adobe Flash Platform, Ramesh Srinivasaraghavan Payments for the Web.future, Khurram Khan and Praveen Alavilli Longevity of Scalable Systems, Nishad Kamat Transform yourself into a Mobile App Developer Using Web Run Time, Balagopal K S Developing Multi Screen Applications on Adobe Flash Platform, Hemanth Sharma Why Harmony and For Whom?, Himanshu Goyal IIS Hosting Solution for ASP.net and PHP Web Sites, Nahas Mohammed Building Pluggable Web applications using Django, Lakshman Prasad Workshop: The 180-min AJAX and JSON Spike Class, Scott Davis Workshop: Essence of Functional Programming, Venkat Subramaniam Workshop: Agile Development, Tools, and Teams and Scrum Certification, Stephen Forte Workshop: PHP + Adobe Flex = Killer RIA, Shyamprasad P Workshop: Cloud Computing Boot Camp on the Google App Engine, Matthew McCullough Workshop: Building Data Centric Applications using Adobe Flex and Java, Prashant Singh Workshop: Building Your First Amazon App, Simone Brunozzi Workshop: Windows Azure Deep Dive, Ramaprasanna Chellamuthu Workshop: Monetizing your Apps with PayPal X Payments Platform, Khurram Khan, Praveen Alavilli Workshop: User Expereince Evaluation Model Walkthrough, Sanna Häiväläinen Sponsors of Great Indian Developer Summit 2010 include: Platinum sponsors Microsoft, Oracle Forum Nokia and Adobe; Gold sponsors Intel and SAP; Silver sponsors Quest Software, PayPal, Telerik and AMT. About Great Indian Developer Summit Great Indian Developer Summit is the gold standard for India's software developer ecosystem for gaining exposure to and evaluating new projects, tools, services, platforms, languages, software and standards. Packed with premium knowledge, action plans and advise from been-there-done-it veterans, creators, and visionaries, the 2010 edition of Great Indian Developer Summit features focused sessions, case studies, workshops and power panels that will transform you into a force to reckon with. Featuring 3 co-located conferences: GIDS.NET, GIDS.Web, GIDS.Java and an exclusive day of in-depth tutorials - GIDS.Workshops, from 20 April to 24 April at the IISc campus in Bangalore. At GIDS you'll participate in hundreds of sessions encompassing the full range of Microsoft computing, Java, Agile, RIA, Rich Web, open source/standards, languages, frameworks and platforms, practical tutorials that deep dive into technical skill and best practices, inspirational keynote presentations, an Expo Hall featuring dozens of the latest projects and products activities, engaging networking events, and the interact with the best and brightest of speakers from around the world. For further information on GIDS 2010, please visit the summit on the web http://www.developersummit.com/ A Saltmarch Media Press Release E: [email protected] Ph: +91 80 4005 1000

    Read the article

  • Joomla "online-order" component for Joomla

    - by mIRU
    Hello Word :) Somebody can help me in finding an "online - ordering" component for joomla . That can contain the following function : Possibility of creating Form with pages like RS!Form Uploading Files Supporting Payment Gateways like PayPal , MasterCard , WebMoney , YandexMoney ,Money Bookers , Google Checkout ... more ) Saving data in database. A friendly control panel where admin can check statistics , income and expenditure, including offline transactions, and report on the data . A good example , for what I'm looking , is this component http://www.nbill.co.uk/ , but is to expensive and complicated . I'll be happy fore some links or advices :) . Thank a Lot ! for all who are trying to help me ! And sorry for my bad English :-)

    Read the article

  • Networking in VirtualBox

    - by Fat Bloke
    Networking in VirtualBox is extremely powerful, but can also be a bit daunting, so here's a quick overview of the different ways you can setup networking in VirtualBox, with a few pointers as to which configurations should be used and when. VirtualBox allows you to configure up to 8 virtual NICs (Network Interface Controllers) for each guest vm (although only 4 are exposed in the GUI) and for each of these NICs you can configure: Which virtualized NIC-type is exposed to the Guest. Examples include: Intel PRO/1000 MT Server (82545EM),  AMD PCNet FAST III (Am79C973, the default) or  a Paravirtualized network adapter (virtio-net). How the NIC operates with respect to your Host's physical networking. The main modes are: Network Address Translation (NAT) Bridged networking Internal networking Host-only networking NAT with Port-forwarding The choice of NIC-type comes down to whether the guest has drivers for that NIC.  VirtualBox, suggests a NIC based on the guest OS-type that you specify during creation of the vm, and you rarely need to modify this. But the choice of networking mode depends on how you want to use your vm (client or server) and whether you want other machines on your network to see it. So let's look at each mode in a bit more detail... Network Address Translation (NAT) This is the default mode for new vm's and works great in most situations when the Guest is a "client" type of vm. (i.e. most network connections are outbound). Here's how it works: When the guest OS boots,  it typically uses DHCP to get an IP address. VirtualBox will field this DHCP request and tell the guest OS its assigned IP address and the gateway address for routing outbound connections. In this mode, every vm is assigned the same IP address (10.0.2.15) because each vm thinks they are on their own isolated network. And when they send their traffic via the gateway (10.0.2.2) VirtualBox rewrites the packets to make them appear as though they originated from the Host, rather than the Guest (running inside the Host). This means that the Guest will work even as the Host moves from network to network (e.g. laptop moving between locations), and from wireless to wired connections too. However, how does another computer initiate a connection into a Guest?  e.g. connecting to a web server running in the Guest. This is not (normally) possible using NAT mode as there is no route into the Guest OS. So for vm's running servers we need a different networking mode.... Bridged Networking Bridged Networking is used when you want your vm to be a full network citizen, i.e. to be an equal to your host machine on the network. In this mode, a virtual NIC is "bridged" to a physical NIC on your host, like this: The effect of this is that each VM has access to the physical network in the same way as your host. It can access any service on the network such as external DHCP services, name lookup services, and routing information just as the host does. Logically, the network looks like this: The downside of this mode is that if you run many vm's you can quickly run out of IP addresses or your network administrator gets fed up with you asking for statically assigned IP addresses. Secondly, if your host has multiple physical NICs (e.g. Wireless and Wired) you must reconfigure the bridge when your host jumps networks.  Hmm, so what if you want to run servers in vm's but don't want to involve your network administrator? Maybe one of the next 2 modes is for you... Internal Networking When you configure one or more vm's to sit on an Internal network, VirtualBox ensures that all traffic on that network stays within the host and is only visible to vm's on that virtual network. Configuration looks like this: The internal network ( in this example "intnet" ) is a totally isolated network and so is very "quiet". This is good for testing when you need a separate, clean network, and you can create sophisticated internal networks with vm's that provide their own services to the internal network. (e.g. Active Directory, DHCP, etc). Note that not even the Host is a member of the internal network, but this mode allows vm's to function even when the Host is not connected to a network (e.g. on a plane). Note that in this mode, VirtualBox provides no "convenience" services such as DHCP, so your machines must be statically configured or one of the vm's needs to provide a DHCP/Name service. Multiple internal networks are possible and you can configure vm's to have multiple NICs to sit across internal and other network modes and thereby provide routes if needed. But all this sounds tricky. What if you want an Internal Network that the host participates on with VirtualBox providing IP addresses to the Guests? Ah, then for this, you might want to consider Host-only Networking... Host-only Networking Host-only Networking is like Internal Networking in that you indicate which network the Guest sits on, in this case, "vboxnet0": All vm's sitting on this "vboxnet0" network will see each other, and additionally, the host can see these vm's too. However, other external machines cannot see Guests on this network, hence the name "Host-only". Logically, the network looks like this: This looks very similar to Internal Networking but the host is now on "vboxnet0" and can provide DHCP services. To configure how a Host-only network behaves, look in the VirtualBox Manager...Preferences...Network dialog: Port-Forwarding with NAT Networking Now you may think that we've provided enough modes here to handle every eventuality but here's just one more... What if you cart around a mobile-demo or dev environment on, say, a laptop and you have one or more vm's that you need other machines to connect into? And you are continually hopping onto different (customer?) networks. In this scenario: NAT - won't work because external machines need to connect in. Bridged - possibly an option, but does your customer want you eating IP addresses and can your software cope with changing networks? Internal - we need the vm(s) to be visible on the network, so this is no good. Host-only - same problem as above, we want external machines to connect in to the vm's. Enter Port-forwarding to save the day! Configure your vm's to use NAT networking; Add Port Forwarding rules; External machines connect to "host":"port number" and connections are forwarded by VirtualBox to the guest:port number specified. For example, if your vm runs a web server on port 80, you could set up rules like this:  ...which reads: "any connections on port 8080 on the Host will be forwarded onto this vm's port 80".  This provides a mobile demo system which won't need re-configuring every time you open your laptop lid. Summary VirtualBox has a very powerful set of options allowing you to set up almost any configuration your heart desires. For more information, check out the VirtualBox User Manual on Virtual Networking. -FB 

    Read the article

  • Could not load file or assembly log4net or one of its dependencies

    - by Elie
    I've been asked to take a look at an error in an ASP/C# application with its Paypal integration. The error, shown in full, is: Could not load file or assembly 'log4net, Version=1.2.0.30714, Culture=neutral, PublicKeyToken=b32731d11ce58905' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) From what I understand, this means that the actual file located (that is, log4net.dll in my bin directory) does not match the version expected based on some assembly configuration. The problem I'm having is that I cannot locate where this file is being referenced. I have access to all the files in the web root directory of the site, and cannot locate any config files that reference this DLL. Where else might I need to look to determine what's causing the mis-match? As a note, I've made sure that the version of the DLL in the bin directory is up to date, but this does not seem to have resolved anything.

    Read the article

  • How do I show a user's credit based on their session

    - by Jamie
    Hi all - I'm developing a simple LAMP app where users can credit their account using Paypal. I suspect this is a simple issue, but have spent quite a while experimenting to no avail and would appreciate any thoughts: System has a user management system working fine using sessions, but I can't get it to display the current user's credit. But I've been trying things along the lines of: $result = mysql_query(" SELECT * FROM users INNER JOIN account ON account.UserID=account.UserID ORDER BY account.accountID"); while($_SESSION['Username'] = $row['Username'] ) { echo $row['Username']; echo $row['Credit']; } I suspect the while statement is invalid, but I want it to echo username and credit where the current session username = the username stored in the database. Thanks so much for taking a look - very much appreciated.

    Read the article

  • Clustering for Mere Mortals (Pt 3)

    - by Geoff N. Hiten
    The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  Start with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

    Read the article

  • Clustering for Mere Mortals (Pt3)

    - by Geoff N. Hiten
    The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  IStart with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

    Read the article

  • Network Access: I can't access 192.168.1.101 from 192.168.1.102.

    - by takpar
    Hi, I'm running Ubuntu 10.04 on my PC with IP 192.168.1.101. every thing work fine, e.g. my web server is running and I can see http://localhost/ or http://192.168.1.101 properly. But the problem is that I cannot see my PC from my laptop at 192.168.1.102 e.g. at my laptop http://192.168.1.101 gives Connection timed out in browser. or trying to telnet on any port leads to: telnet: Unable to connect to remote host: Connection timed out laptop is running a fresh install of Ubuntu as well and there is no setup for firewall stuff in both computers. PS: Both computers can ping each other well. The router is a cicso linksys wireless ADSL modem. Currently, I can connect to FTP server on the Windows running on 192.168.1.102 from 192.168.1.101 without problem. Theses are commands ran on my PC, 192.168.1.101: ifconfig: adp@adp-desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:e1:8e:cf inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::226:18ff:fee1:8ecf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1831935 errors:0 dropped:0 overruns:0 frame:0 TX packets:1493786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1996855925 (1.9 GB) TX bytes:215288238 (215.2 MB) Interrupt:27 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:951742 errors:0 dropped:0 overruns:0 frame:0 TX packets:951742 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:494351095 (494.3 MB) TX bytes:494351095 (494.3 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:46:c0:00:01 inet addr:192.168.91.1 Bcast:192.168.91.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:46:c0:00:08 inet addr:192.168.156.1 Bcast:192.168.156.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) port 80 is set to 0.0.0.0 well: adp@adp-desktop:~$ netstat -ln | grep 'LISTEN ' tcp 0 0 127.0.0.1:52815 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4559 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4369 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:7634 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5269 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN tcp 0 0 127.0.1.1:7777 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:33601 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp6 0 0 :::139 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 :::445 :::* LISTEN /etc/hosts.deny is empty: adp@adp-desktop:~$ cat /etc/hosts.deny # /etc/hosts.deny: list of hosts that are _not_ allowed to access the system. # See the manual pages hosts_access(5) and hosts_options(5). # # Example: ALL: some.host.name, .some.domain # ALL EXCEPT in.fingerd: other.host.name, .other.domain # # If you're going to protect the portmapper use the name "portmap" for the # daemon name. Remember that you can only use the keyword "ALL" and IP # addresses (NOT host or domain names) for the portmapper, as well as for # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) # for further information. # # The PARANOID wildcard matches any host whose name does not match its # address. # # You may wish to enable this to ensure any programs that don't # validate looked up hostnames still leave understandable logs. In past # versions of Debian this has been the default. # ALL: PARANOID netstat -l: adp@adp-desktop:~$ netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:52815 *:* LISTEN tcp 0 0 *:hylafax *:* LISTEN tcp 0 0 *:www *:* LISTEN tcp 0 0 *:4369 *:* LISTEN tcp 0 0 localhost:7634 *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 *:xmpp-server *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 *:5280 *:* LISTEN tcp 0 0 adp-desktop:7777 *:* LISTEN tcp 0 0 *:33601 *:* LISTEN tcp 0 0 *:xmpp-client *:* LISTEN tcp 0 0 localhost:mysql *:* LISTEN tcp6 0 0 [::]:netbios-ssn [::]:* LISTEN tcp6 0 0 localhost:ipp [::]:* LISTEN tcp6 0 0 [::]:microsoft-ds [::]:* LISTEN udp 0 0 *:bootpc *:* udp 0 0 *:mdns *:* udp 0 0 *:47467 *:* udp 0 0 192.168.1.10:netbios-ns *:* udp 0 0 192.168.91.1:netbios-ns *:* udp 0 0 192.168.156.:netbios-ns *:* udp 0 0 *:netbios-ns *:* udp 0 0 192.168.1.1:netbios-dgm *:* udp 0 0 192.168.91.:netbios-dgm *:* udp 0 0 192.168.156:netbios-dgm *:* udp 0 0 *:netbios-dgm *:* raw 0 0 *:icmp *:* 7 netstat -rn: adp@adp-desktop:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.91.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 192.168.156.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 commands on the laptop, 192.168.1.102: ifconfig: root@fakeuser-laptop:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:33:a2:31:15 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth1 Link encap:Ethernet HWaddr 00:2d:d9:3e:1f:6c inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::21d:d9ff:fe3e:1f6c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5681 errors:0 dropped:0 overruns:0 frame:10313 TX packets:6717 errors:6 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4055251 (4.0 MB) TX bytes:779308 (779.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:206 errors:0 dropped:0 overruns:0 frame:0 TX packets:206 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15172 (15.1 KB) TX bytes:15172 (15.1 KB) netstat -rn: root@fakeuser-laptop:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Sell digital goods online

    - by Adam
    What's the best solution for a photographer wanting to sell image files online? I tried zencart, but it's way over the top and their backend looks like a 3 year old designed it. Is there a free solution out there? One that has easily modifiable templates and isn't too tedious to add hundreds of pictures for sale? I'm seriously thinking learning how to do it myself with the whole paypal IPN thing might be the way to go.. Suggestions is greatly appreciated! Adam

    Read the article

  • How can I electronically transfer money to another account using Bank Transfer (BACS)

    - by Mooktakim Ahmed
    I'm working on a project where we collect payments from users using credit/debit/PayPal payments. The service is taking payments from users on behalf of a 3rd party organisation. Once we take the payment, minus fees, we want to transfer the amount to the organisations bank account. For now, what we can do is pay the organisation using Online Banking BACS bank transfer. But I would like to know if there is a way to do this automatically using an API. If we need to somehow register the 3rd parties bank account details before making transfers, this is fine. We just want to automate the whole process, since at the moment the transfer is a manual step. Are there any gateways or APIs I can use for this? In the UK?

    Read the article

  • Multi page ordering form php or ajax

    - by Adam
    I'm looking to create a multi page ordering form the first page would contain some dropdown and text fields, the second page would contain more text fields, the third page would be an order summery with paypal payment option. I'm just wondering what the best way to create this order form is. I've used sessions in the past but never with users entering in text and picking items from drop downs, does anyone have any resources for doing this? Or does anyone know of a jquery or other ajax example or plugin I might be able to use and modify. any insight would be a big help. thanks

    Read the article

  • Credit card payment method

    - by Rudy
    Hi guys, I'm creating a online webshop using ASP .net and C#. The website is supposed to receive payment by master card, visa, paypal, and e-transfer. Any reference how can I do that, esp for master card and visa. Is it done via web service? Do i hv to use a payment gateway? Is it possible to connect directly to MC and visa? I totally have no clue on this. Thanks!

    Read the article

  • Intergration of checkout badges into an order form

    - by Reno
    Hi Does anyone know how to integrate several checkout badges into an order form? It might sound obvious to all (or most) but within the html wouldn't the form tag have an action to just one of the online merchants and not all? For example? I would like to have a basic order form which collects a users name, email, uploaded files, project details, and a few packages to choose from. Once they have selected the package most appropriate to them? They would be given a total cost and asked to pay via Paypal, Google Checkout OR Moneybookers. Can anyone help me out on this? Or point me in the direction where I can obtain further knowledge? Thanks in advance. Reno

    Read the article

  • IIS 7.0 informational HTTP status codes

    - by Samir R. Bhogayta
    1xx - Informational These HTTP status codes indicate a provisional response. The client computer receives one or more 1xx responses before the client computer receives a regular response. IIS 7.0 uses the following informational HTTP status codes: 100 - Continue. 101 - Switching protocols. 2xx - Success These HTTP status codes indicate that the server successfully accepted the request. IIS 7.0 uses the following success HTTP status codes: 200 - OK. The client request has succeeded. 201 - Created. 202 - Accepted. 203 - Nonauthoritative information. 204 - No content. 205 - Reset content. 206 - Partial content. 3xx - Redirection These HTTP status codes indicate that the client browser must take more action to fulfill the request. For example, the client browser may have to request a different page on the server. Or, the client browser may have to repeat the request by using a proxy server. IIS 7.0 uses the following redirection HTTP status codes: 301 - Moved permanently. 302 - Object moved. 304 - Not modified. 307 - Temporary redirect. 4xx - Client error These HTTP status codes indicate that an error occurred and that the client browser appears to be at fault. For example, the client browser may have requested a page that does not exist. Or, the client browser may not have provided valid authentication information. IIS 7.0 uses the following client error HTTP status codes: 400 - Bad request. The request could not be understood by the server due to malformed syntax. The client should not repeat the request without modifications. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 400 error: 400.1 - Invalid Destination Header. 400.2 - Invalid Depth Header. 400.3 - Invalid If Header. 400.4 - Invalid Overwrite Header. 400.5 - Invalid Translate Header. 400.6 - Invalid Request Body. 400.7 - Invalid Content Length. 400.8 - Invalid Timeout. 400.9 - Invalid Lock Token. 401 - Access denied. IIS 7.0 defines several HTTP status codes that indicate a more specific cause of a 401 error. The following specific HTTP status codes are displayed in the client browser but are not displayed in the IIS log: 401.1 - Logon failed. 401.2 - Logon failed due to server configuration. 401.3 - Unauthorized due to ACL on resource. 401.4 - Authorization failed by filter. 401.5 - Authorization failed by ISAPI/CGI application. 403 - Forbidden. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 403 error: 403.1 - Execute access forbidden. 403.2 - Read access forbidden. 403.3 - Write access forbidden. 403.4 - SSL required. 403.5 - SSL 128 required. 403.6 - IP address rejected. 403.7 - Client certificate required. 403.8 - Site access denied. 403.9 - Forbidden: Too many clients are trying to connect to the Web server. 403.10 - Forbidden: Web server is configured to deny Execute access. 403.11 - Forbidden: Password has been changed. 403.12 - Mapper denied access. 403.13 - Client certificate revoked. 403.14 - Directory listing denied. 403.15 - Forbidden: Client access licenses have exceeded limits on the Web server. 403.16 - Client certificate is untrusted or invalid. 403.17 - Client certificate has expired or is not yet valid. 403.18 - Cannot execute requested URL in the current application pool. 403.19 - Cannot execute CGI applications for the client in this application pool. 403.20 - Forbidden: Passport logon failed. 403.21 - Forbidden: Source access denied. 403.22 - Forbidden: Infinite depth is denied. 404 - Not found. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 404 error: 404.0 - Not found. 404.1 - Site Not Found. 404.2 - ISAPI or CGI restriction. 404.3 - MIME type restriction. 404.4 - No handler configured. 404.5 - Denied by request filtering configuration. 404.6 - Verb denied. 404.7 - File extension denied. 404.8 - Hidden namespace. 404.9 - File attribute hidden. 404.10 - Request header too long. 404.11 - Request contains double escape sequence. 404.12 - Request contains high-bit characters. 404.13 - Content length too large. 404.14 - Request URL too long. 404.15 - Query string too long. 404.16 - DAV request sent to the static file handler. 404.17 - Dynamic content mapped to the static file handler via a wildcard MIME mapping. 404.18 - Querystring sequence denied. 404.19 - Denied by filtering rule. 405 - Method Not Allowed. 406 - Client browser does not accept the MIME type of the requested page. 408 - Request timed out. 412 - Precondition failed. 5xx - Server error These HTTP status codes indicate that the server cannot complete the request because the server encounters an error. IIS 7.0 uses the following server error HTTP status codes: 500 - Internal server error. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error: 500.0 - Module or ISAPI error occurred. 500.11 - Application is shutting down on the Web server. 500.12 - Application is busy restarting on the Web server. 500.13 - Web server is too busy. 500.15 - Direct requests for Global.asax are not allowed. 500.19 - Configuration data is invalid. 500.21 - Module not recognized. 500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode. 500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode. 500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode. 500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred. Note Here is where the distributed rules configuration is read for both inbound and outbound rules. 500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred. Note Here is where the global rules configuration is read. 500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred. 500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated. 500.100 - Internal ASP error. 501 - Header values specify a configuration that is not implemented. 502 - Web server received an invalid response while acting as a gateway or proxy. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 502 error: 502.1 - CGI application timeout. 502.2 - Bad gateway. 503 - Service unavailable. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 503 error: 503.0 - Application pool unavailable. 503.2 - Concurrent request limit exceeded.

    Read the article

  • ShareThis causing "Transfering Data From" in Firefox status bar

    - by JackIT
    There is a conflict with the ShareThis script and another script I have on my site. I've set up a test example here: http://jbrlsr.com/help.html to reproduce the issue, use FireFox and mouseover a few of the links, you'll notice "Transferring Data From" in the status bar area. To clear that message click on the ShareThis icon. There is one post I've found on the ShareThis Forums: forums.sharethis.com/topic.php?id=2415#post-4199 but no resolution. If you can pinpoint the issue and suggest a realistic/workable resolution I will PayPal you $100.

    Read the article

  • What is the big deal with SSL?

    - by xarzu
    What is the big deal with SSL? My interenet website hosting provider has sold me an SSL line. All I know is that for what I want to do with PayPal, I need to have a folder that is denoted beginning with https:// and this is what an SSL line is. But it seems that they have a hard time setting it up. I wonder if I can just go ahead and do it for myself. I mean, some third party has send me confirmation and even what seems to be some sort of long numeric certificate.

    Read the article

  • How to limit a google calendar xml / rss feed by date range (not working!!)

    - by Phil
    For the life of me I cannot get my google calendar xml feed to only display events within a certain date range. I know that start-min and start-max are supposed to limit the output (according to these posts: (links to posts deleted because I am a newbie and can only post one hyperlink argh) BUT I CAN'T GET IT TO WORK. It keeps showing lot of things outside the range. I created a sample calendar and made it public. It is some events the first week of april. Can anyone show me how to construct a request that only returns those three events from the first week in april? I'll GLADLY and GRATEFULLY paypal $10 to anyone who helps me break through on this. Here is the calendar's public feed: http://www.google.com/calendar/feeds/66m31c36sj9u5k8kekrvt2lpr8%40group.calendar.google.com/public/basic

    Read the article

  • Google App Engine modifyThreadGroup problem

    - by Frank
    I'm using Google App Engine to process Paypal IPN messages, when my servlet starts I use the following lines to start another process to process massages : public class PayPal_Monitor_Servlet extends HttpServlet { PayPal_Message_To_License_File_Worker PayPal_message_to_license_file_worker; public void init(ServletConfig config) throws ServletException // Initializes the servlet. { super.init(config); PayPal_message_to_license_file_worker=new PayPal_Message_To_License_File_Worker(); } public void doGet(HttpServletRequest request,HttpServletResponse response) throws IOException { } ... } public class PayPal_Message_To_License_File_Worker implements Runnable { static Thread PayPal_Message_To_License_File_Thread; ... PayPal_Message_To_License_File_Worker() { start(); } void start() { if (PayPal_Message_To_License_File_Thread==null) { PayPal_Message_To_License_File_Thread=new Thread(this); PayPal_Message_To_License_File_Thread.setPriority(Thread.MIN_PRIORITY); PayPal_Message_To_License_File_Thread.start(); } ... } But "PayPal_Message_To_License_File_Thread=new Thread(this);" is causing the following error : javax.servlet.ServletContext log: unavailable java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup) at java.security.AccessControlContext.checkPermission(AccessControlContext.java:355) at java.security.AccessController.checkPermission(AccessController.java:567) Why, how to fix it ? Frank

    Read the article

  • Convert string to integer and multiply two integers

    - by demlasjr
    I have a big time trying to either convert a string into a integer or multiply two integers. I can't convert the string into integer because it's resulting me into a boolean (when I'm using var_dump). I can convert the other integer in string, but I'm unable to multiply it. I have this: <? $fees=$commerce->cart->get_total(); $payfee = str_replace('&nbsp;&euro;', '', $fees); $payfee = str_replace(',','', $payfee); //this is the string $fee = 0.025; $paypal = $payfee * $fee; //this thing is not working ?> I tried converting the payfee in integer, but still can't make it work. I did something like this before and worked well, but not this time. Any help will be appreciated. P.S Thank you to the whole stackoverflow.com community which helped me many times before.

    Read the article

  • Joomla Development - Allow Direct File Access AND use Joomla-intern Framework

    - by Email
    Hi As usual you write in Joomla Development defined('_JEXEC') or die('Restricted access'); I make a plugin which needs access from Paypal/IPN, so i exclude that in that specific file. BUT I also need to use the Joomla-intern Variables to access the Database, so i tried this: require("../filewithaccesstoframework.php"); OR even $baseurl = $_SERVER['HTTP_HOST']; $baseurl ="http://".$baseurl."/configuration.php"; require($baseurl); By using the first code it displays "Restircted Access" since it seems to take this from the included file which i can't skip to put-in-there. The second code does not seem to recognize the Variables used in configuration.php like $host, $db, $password. the file configuration.php is chmod 444 Why this happens and is there a workarround to allow direct access to a file AND using the Joomla intern Framework (Variables, Functions)?

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >