Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 651/1185 | < Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658  | Next Page >

• Looking for cheap Wireless router, with USB for attached USB disk drive

  - by geoffc

  I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

  Read the article

• How to fix a Postfix/MySQL/Dovecot Unknown Host Issue?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

• PHP/Linux File Permissions

  - by user1733435

  May I ask a question about file permission. I set up Ubuntu server where Apache got running. I have simple php upload form and able to upload file to /var/www/site/uploads as follows. sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 1736 drwxrwxrwx 2 www-data www-data 4096 Oct 18 02:53 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 00:42 ../ -rw-r--r-- 1 www-data www-data 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 www-data www-data 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 www-data www-data 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg Is there anyway to upload files and they show up as -rw-r--r-- 1 sandbox sandbox 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg so that I could straight away feed them to waiting/running shell script. Right now waiting script(move,checksums,rename,resize,etc) unable to do anything to uploaded files with attributes of www-data. If I just do as local account, such as sandbox@sandbox-virtual-machine:/var/www/site/uploads$touch testfile then the script is able to run as I would like to. Any suggestion would be grateful,thanks in advance as well. Thanks for everyone giving help to me,that I was able to progress. Now I am close to getting solved and append the output sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 388 drwxrwxrwx 2 www-data www-data 4096 Oct 18 04:22 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 04:17 ../ -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 04:21 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 219808 Oct 18 04:20 adafruit_pi.png -rw-rw-r-- 1 sandbox sandbox 0 Oct 18 04:22 test How may I set permission to uploaded files like 'test' only w difference in middle group. Such as adafruit_pi.png Vs test. Which statement shall I insert to php code,please?

  Read the article

• Sparc v440 unable 2 boot after recommended patch install

  - by user100660

  After installing the October 2011 recommended patch bundle on a Solaris 10 the host fails to boot. The output is {0} ok boot SC Alert: Host System has Reset screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Sun Fire V440, No Keyboard Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.10.10, 8192 MB memory installed, Serial #54744555. Ethernet address 0:3:ba:43:55:eb, Host ID: 834355eb. Rebooting with command: boot Boot device: /pci@1f,700000/scsi@2/disk@0,0:a File and args: \ Evaluating: Out of memory Warning: Fcode sequence resulted in a net stack depth change of 1 Evaluating: Evaluating: The file just loaded does not appear to be executable. {3} ok If I do a boot -F failsafe the host come up and I'm able to mount the root device (ufs on /dev/dsk/c1t0d0s0) and nothing appears broken, i.e I can see the logfiles from the patch install etc. Root device still have 1GB+ free. Only 2 kernel patches was installed from the patch bundle: 144500-19 & 147440-02. Any hints how to debug it further, etc.

  Read the article

• How To Set Up A Loadbalanced High-Availability Apache Cluster On Windows

  - by bReAd

  Setting up a two-node Apache web server cluster that provides high-availability. In front of the Apache cluster we create a load balancer that splits up incoming requests between the two Apache nodes. Because we do not want the load balancer to become another “Single Point Of Failure”, we must provide high-availability for the load balancer, too. Therefore our load balancer will in fact consist out of two load balancer nodes that monitor each other using heartbeat, and if one load balancer fails, the other takes over silently. The following setup is proposed: Apache node 1: webserver1.example.com (webserver1) – IP address: 192.168.0.101; Apache document root: /var/www Apache node 2: webserver2.example.com (webserver2) – IP address: 192.168.0.102; Apache document root: /var/www Load Balancer node 1: loadb1.example.com (loadb1) – IP address: 192.168.0.103 Load Balancer node 2: loadb2.example.com (loadb2) – IP address: 192.168.0.104 Virtual IP Address: 192.168.0.105 (used for incoming requests) Currently, there are many solutions for Linux machines and there aren't any on windows. I've tried searching a long time for solutions on Windows platform How do I create the virtual IP in windows and perform monitoring and make the load balancer listen to the virtual IP Address?

  Read the article

• BES Express - configure MDS to push messages from 3rd party web application

  - by Max Gontar

  Hi! I have developed IIS web service to send PAP messages using Blackberry Push API over MDS. And there is an application installed on device, configured to receive push messages on appropriate port. Everything works well on MDS simulator. But it's not working well in real environment: I have installed BES Express and register several devices. I can browse MDS url with appropriate port, so url is correct. Also port enabled for reliable pushes is used in push message and in device application. Here is MDS simulator log: <2011-01-12 14:00:03.456 EET>:[272]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = PapServlet: request from 0:0:0:0:0:0:0:1 564 bytes...> <2011-01-12 14:00:03.476 EET>:[273]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Mapping PAP request to push request for pushID:pushID:asdas> <2011-01-12 14:00:03.479 EET>:[274]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = PushServlet: POST request from [UNKNOWN @ 0:0:0:0:0:0:0:1] to [PAPDEST=WAPPUSH%3D2100000A%253A100%2FTYPE%3DUSER%40rim.net&PORT=100&REQUESTURI=/] : -1 bytes...> <2011-01-12 14:00:03.480 EET>:[275]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = submitting push message with id:pushID:asdas> <2011-01-12 14:00:03.482 EET>:[276]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Executing push submit command for pushID:pushID:asdas> <2011-01-12 14:00:03.483 EET>:[278]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Pushing message to: 2100000a> <2011-01-12 14:00:03.484 EET>:[279]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Number of active push connections:1> <2011-01-12 14:00:03.489 EET>:[280]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = added server-initiated connection = -872546301, push id = pushID:asdas> <2011-01-12 14:00:03.491 EET>:[281]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Available threads in DefaultJobPool = 9 running JobRunner: DefaultJobRunner-7> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION => <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Transmission Line Section]:> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = POST / HTTP/1.1> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Headers Section]: 8 headers> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Parameters Section]: 3 parameters> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION => <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Transmission Line Section]:> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = POST / HTTP/1.1> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Headers Section]: 9 headers> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Parameters Section]: 3 parameters> <2011-01-12 14:00:03.501 EET>:[284]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Finished JobRunner: DefaultJobRunner-7, available threads in DefaultJobPool = 10, time spent = 8ms> <2011-01-12 14:00:03.521 EET>:[287]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = CreatedSendingQueue, DEVICEPIN = 2100000a> <2011-01-12 14:00:03.526 EET>:[290]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = Sending, TAG = 1288699908, DEVICEPIN = 2100000a, VERSION = 16, CONNECTIONID = -872546301, SEQUENCE = 0, TYPE = NOTIFY-REQUEST, CONNECTIONHANDLER = http, PROTOCOL = TCP, PARAMETERS = [MGONTAR/10.10.0.35:100], SIZE = 339> <2011-01-12 14:00:03.531 EET>:[291]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Number of active push connections:0> <2011-01-12 14:00:03.591 EET>:[292]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = Notification, TAG = 1288699908, STATE = DELIVERED> <2011-01-12 14:00:03.600 EET>:[296]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Device connections: AVG latency (msecs)79> <2011-01-12 14:00:03.600 EET>:[297]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, Removed push connection:-872546301> <2011-01-12 14:00:07.015 EET>:[298]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = RemovedSendingQueue, DEVICEPIN = 2100000a> And here is real MDS log: <2011-01-12 11:35:02.763 GMT>:[3932]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, PapServlet: request from 192.168.1.241 583 bytes...> <2011-01-12 11:35:02.897 GMT>:[3933]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Mapping PAP request to push request for pushID:pushID:sdfsdfwerwer> <2011-01-12 11:35:02.909 GMT>:[3934]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, PushServlet: POST request from [UNKNOWN @ 192.168.1.241] to [PAPDEST=WAPPUSH%3D22D7F6BD%253A7874%2FTYPE%3DUSER%40rim.net&PORT=7874&REQUESTURI=/]> <2011-01-12 11:35:02.909 GMT>:[3934]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<push id: pushID:sdfsdfwerwer> <2011-01-12 11:35:02.910 GMT>:[3935]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, submitting push message with id:pushID:sdfsdfwerwer> <2011-01-12 11:35:02.910 GMT>:[3936]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Executing push submit command for pushID:pushID:sdfsdfwerwer> <2011-01-12 11:35:02.911 GMT>:[3937]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Pushing message to: 22d7f6bd> <2011-01-12 11:35:02.912 GMT>:[3938]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Number of active push connections:1> <2011-01-12 11:35:02.931 GMT>:[3939]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, added server-initiated connection = -1848311806, push id = pushID:sdfsdfwerwer> <2011-01-12 11:35:03.240 GMT>:[3940]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = CreatedSendingQueue, DEVICEPIN = 22d7f6bd, USERID = u3> <2011-01-12 11:35:03.241 GMT>:[3941]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = Sending, TAG = 536543251, DEVICEPIN = 22d7f6bd, USERID = u3, VERSION = 16, CONNECTIONID = -1848311806, SEQUENCE = 0, TYPE = NOTIFY-REQUEST, CONNECTIONHANDLER = http, PROTOCOL = TCP, PARAMETERS = [LDN-Server1/192.168.1.240:7874], SIZE = 383> <2011-01-12 11:35:03.241 GMT>:[3942]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Number of active push connections:0> <2011-01-12 11:35:03.253 GMT>:[3943]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SRP, SRPID = S27700165[LDN-SERVER1:3200], EVENT = Sending, VERSION = 1, COMMAND = SEND, TAG = 536543251, SIZE = 570> <2011-01-12 11:35:03.838 GMT>:[3944]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SRP, SRPID = S27700165[LDN-SERVER1:3200], EVENT = Receiving, VERSION = 1, COMMAND = STATUS, TAG = 536543251, SIZE = 10, STATE = DELIVERED> <2011-01-12 11:35:04.104 GMT>:[3945]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = Notification, TAG = 536543251, STATE = DELIVERED> <2011-01-12 11:35:04.121 GMT>:[3946]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Device connections: AVG latency (msecs)893> <2011-01-12 11:35:04.135 GMT>:[3947]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<INFO >:<LAYER = IPPP, DEVICEPIN = 22d7f6bd, DOMAINNAME = LDN-Server1/192.168.1.240, CONNECTION_TYPE = PUSH_CONN, ConnectionId = -1848311806, DURATION(ms) = 1151, MFH_KBytes = 0, MTH_KBytes = 0.374, MFH_PACKET_COUNT = 0, MTH_PACKET_COUNT = 1> <2011-01-12 11:35:04.144 GMT>:[3948]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, Removed push connection:-1848311806> <2011-01-12 11:35:09.264 GMT>:[3949]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = RemovedSendingQueue, DEVICEPIN = 22d7f6bd, USERID = u3> <2011-01-12 11:35:58.187 GMT>:[3950]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SRP, SRPID = S27700165[LDN-SERVER1:3200], EVENT = Sending, VERSION = 1, COMMAND = INFO, SIZE = 46> <2011-01-12 11:35:58.187 GMT>:[3951]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Sent health to S27700165[LDN-SERVER1:3200] Health=[0x 0000 0007 0000 0000],Mask=[0x 0000 0007 0000 0000],Load=[60]> As you can see, logs not really differs, message is marked as delivered. But my app on device not really gets this message (as it works in mds simulator) Please advice me, what may be wrong? Is there some certificate to install or security settings I should configure to make this push message came to device application? Thank you! same question on bbforums

  Read the article

• DNS setup problems with Windows Azure VPS

  - by jbigelow

  What is the proper to setup the A record (or CNAME) for a Windows Azure VPS? I can't connect to my website after setting up IIS and believe I don't have the correct DNS setup. I created a small VPS instance with the default Windows Server 2012 configuration. I RDP'd in and added the Webserver role. In my DNSMadeEasy control panel I added an A record with my Public Virtual IP Address. In IIS I went to the default website and added bindings for the hostname of my website, so I should be able to type mywebsite.com and see the IIS 8 splash screen, but instead my browser cannot connect. I attempted to navigate to the site by typing in my Virtual IP address into the browser and still cannot connect. I RDP'd back into the machine and turned off Windows Firewall. No change, still cannot navigate to my website. From within IIS I double checked my binding. If I click "browse *:80" I can bring up my website in IE with the http:// localhost address. If I click "browse mywebsite on *.80" IE says "This page cannot be displayed.", from within the RDP session I can view the site if I navigate to http:// 127.0.0.1 but not if I navigate to my Virtual IP, nor can I view the page if I try navigating to http:// mywebservername.cloudapp.net I'm thinking I must be fundamentally not understanding how do DNS setup with Azure VPS but my initial Google searches aren't turning up any helpful information. (spaces added after the http:// so serverfault doesn't try and render them as valid urls.)

  Read the article

• Choosing the right TV tuner - USB or PCI TV tuners, hardware/software, DVB? Hybrid/combo/analog?

  - by Nucleon

  Greetings, I'll start with some background information so you know what I'm trying to accomplish and then get to my question. I work at a Television station in the US and we are working on setting up an online DVR/Podcast system for all of our newscasts. So basically we would be recording every newscast in HD, encoding it to flv/h.264 for viewing in a browser on flash compatible and iphone/ipad devices, eventually migrating to WebM when it's browser compliant. This task is theoretically pretty simple as it all it involves is a TV tuner device and a program like VLC, MythTV or whatever to schedule and dump it to a file, encode it with VLC/FFMPEG and push it to the streaming server. Now to the hardware, in order to accomplish that task, should I use an internal PCI tuner or a USB 2.0 tuner? Is there a difference? The bus speeds of both are not too far apart, and is the bus speed really relevant in this case? Does it matter if the device has a hardware encoder or a software encoder? On many sites the USB was recommended for ease of set up and use, but would it overly task a processor, or is that not a concern as long as it's a decent PC (at least duo core, 6gb ram). What's the difference between the stick USB and the Box USBs? To my understanding analog is basically gone in the US, so we would want a hybrid or combo tuner correct? How do those differ from DVB? Are there any other features or concepts which I am missing which may influence the recommended product. It would be ideal if the device which could work in both Linux and a Windows environment, to my knowledge most Hauppauge are? Example 1: PCI Hauppage http://www.newegg.com/Product/Product.aspx?Item=N82E16815116033 Example 2: USB 2.0 Box http://www.newegg.com/Product/Product.aspx?Item=N82E16815116029 Example 3: USB 2.0 Stick http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031 Any guidance from the Superusers would be much appreciated!

  Read the article

• Eclipse grinds to a halt when building workspace

  - by Chris Thompson

  Hi all, This is a bit of a vague question because, frankly, I don't even know where to begin diagnosing the issue. My eclipse (Galileo) installation grinds to a complete halt when it's building the workspace -- to the point where I can't even type. I know the Android SDK I have installed is a major culprit because I can watch the memory usage go through the roof (through the built-in heap monitor) when the Android SDK content loader starts up. Every time I save a file though, the program just stops. The message at the bottom of the screen says Building workspace (74%) and sits there for about 30 or so seconds before completing and returning the performance to normal. I have a few other plugins installed (Maven, SVN, etc) but I'm assuming the main issue is Android. Has anybody had similar issues or any luck correcting this sort of problem? If there's anymore information you think would be helpful, just let me know...I didn't want to do a core dump on this question... I'm running it on Windows 7 64-bit for what it's worth. Thanks! Chris

  Read the article

• I keep losing wireless connection

  - by posfan12

  I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

  Read the article

• How do I use a self encrypting drive?

  - by Unique_Key

  I recently purchased a Micron RealSSD c400 self encrypting drive, and I am having a few issues when trying to get it recognized by my laptop (HP Elitebook 8440p running Windows 7 x64; also tried on a custom-built desktop). When I try to initialize the drive from disk management, I get a CRC error; also, when attempting to partition it from Windows setup, the program can't create the partitions. I also tried with UBCD, nothing. I assume this is due to drive security, but I haven't been able to find much information about this online; do I need a management software or something? I'm completely stumped here. EDIT As requested, when I try partitioning the device from Windows setup I get a 0x80300024 error; when I try initializing it from disk management, I get a "Data error (cyclic redundancy check)" message, and the event log shows the following under System: Source: VDS Basic Provider, message: unexpected failure. error code 490@01010004 (2x) Source: Virtual Disk Service, message: VDS fails to write boot code on a disk during clean operation. Error code: 80070001@02070008 (1x) Source: Disk, message: The device \Device\Harddisk2\DR2 has a bad block (2x) The security logs show nothing related. Also, when attempting to configure it from UBCD (utility: HDAT2), I get an error along the lines of "can't edit partition information" or something to that tune.

  Read the article

• How to change mod_rewrite to avoid {REQUEST_FILENAME} in order to get around 255 character URL limit?

  - by Jeremy Reimer

  According to this answer: max length of url 257 characters for mod_rewrite? there is a maximum 255 character hard limit based on the file system for using mod_rewrite. According to the accepted answer, there are two solutions: Change the URL format of your application to a max of 255 characters between each slash. Move the Rewrite rules into the apache virtual host config and remove the REQUEST_FILENAME. I cannot use the first method, so I am trying to figure out the second. I have put the Rewrite rules into the Apache virtual host config as requested. However I cannot figure out how to remove the REQUEST_FILENAME and still have my web application framework (Dragonfly) still work. Here is the portion of the rewrite rules that I moved from .htaccess into the virtual host config file of Apache: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-l RewriteCond %{REQUEST_FILENAME} !-f [OR] # if don't want Dragonfly to process html files comment # out the line below (you may need to remove the [OR] above too). RewriteCond %{REQUEST_FILENAME} \.(html|nl)$ # Main URL rewriting. RewriteRule (.*) index.cgi?$1 [L,QSA] I've tried removing {REQUEST_FILENAME} and it just breaks the framework in various ways. How do I rewrite this without using {REQUEST_FILENAME}?

  Read the article

• Wireless USB keyboard and mouse can wake system, but then receiver is inactive

  - by BlueMonkMN

  I have a Microsoft brand USB device that acts as a receiver for a wireless Microsoft Keyboard and a wireless Mouse. When it's operating normally, there are LEDs on the device indicating Caps Lock, Num Lock and Function Lock, of which the latter 2 are usually lit. It is plugged into a Dell Isnpiron 531 with Windows 7 32-bit running on an AMD Athlon 64 X2 Dual Core processor 5000+. When the computer goes to sleep (the power indicator on the main box is flashing), I can wake it by moving the mouse. So far all is good. However, something changed in, I think, the past couple weeks (I suspect due to a Microsoft driver update problem). Before the change, after waking the computer, everything would operate normally as far as I could tell, but now after waking the computer, the receiver has no lights on, and the keyboard and mouse are completely unresponsive (which is odd, considering the mouse woke up the computer). There is a button on the receiver that's supposed to reset the wireless connection and flash the lights while it does so, but it has no effect in this state. It's like the receiver doesn't have power (but how would the system know I moved the mouse, unless the power was on until it woke up?). I have checked the BIOS/CMOS settings or whatever you call them, and did not see anything related to USB in the power management section. I have checked Windows 7 device manager and ensured that all the USB Root Hub devices have the setting unchecked for allowing the USB power to be turned off. Like I said, this was working before, and the only thing I can think of that's changed is applying Windows Updates.

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• A Domain Admin user doesn't have effective Administrative rights on a Domain Computer

  - by rwetzeler

  I am a developer who is setting up a virtual domain environment of testing purposes and am having trouble with the setup. I have created a new DC on a new Forest... call it dev.contoso.com. I have setup a virtual internal network for all machines that are going to be apart of this virtual test environment and have given each machine a static IP address in the 192.169.150.0 subnet. I have added machine1.dev.contoso.com to the domain dev.contoso.com. I have also provisioned a user account (adminuser) in the domain and made that user a member of Domain Admins group. Upon logging into machine1 using my newly created Domain Admin account, I cannot access/run any files on machine1. When I go into the advanced permissions for the c:\ folder and goto properties - Security Tab - Advanced - Effective Permissions and search for the dev\adminuser (mentioned above), I get an error saying: Windows can't calculate the effective permissions for admin user What do I need to do to get Administrative rights on Machine1? I am using Server 2008 R2 for both the AD controller and machine1.

  Read the article

• Connect bluetooth headphones both to PC and phone at the same time

  - by Sergiy Byelozyorov

  I have recently bought Philips SHB6110. Extract from the 13th page of manual: Therefore you can connect your Bluetooth stereo headset. with a Bluetooth stereo enabled phone to both listen to music and lead calls, or with a Bluetooth phone that does not support Bluetooth stereo (A2DP) to lead calls and at the same time to a Bluetooth audio device (Bluetooth enabled MP3 player, Bluetooth audio adapter etc.) to listen to music. Make sure to pair the phone first with your Bluetooth headset, then turn both the phone and headset off to then pair the Bluetooth audio device. With the SwitchStream feature you can listen to music and monitor your calls at the same time. Even while listening to music, you will hear a ring tone when receiving a call and can switch to the call simply by tapping the button. The manual however doesn't specify how do I connect to both device at the same time. I use Toshiba Satellite Pro P300-1CG laptop with Belkin Mini Bluetooth Adapter and Nokia N95 phone. Operating system is Windows 7 64-bit and I have Skype installed. Both phone and compute can be used for listening to music and talking on the phone (on PC via Skype). Best solution would be if I could connect to PC and phone as the same time and monitor calls both mobile and Skype calls while listening music from Winamp. If that is not possible, then I would like at least to be able to listen music from PC, while monitoring calls from mobile. So, please tell me how do I connect both PC and phone to headphones?

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• Linux NIC Bonding Issue (CentOS 4 / RHEL 3)

  - by jinanwow

  I am having an issue with bonding NICs on CentOS 4. It appears the bonding driver does work, but it is stuck in round-robin mode and I am trying to get to active-backup. The current config is: ifcfg-bond0 DEVICE=bond0 IPADDR=192.168.204.18 NETMASK=255.255.255.0 ONBOOT=yes BOOTPROTO=none USERCTL=no TYPE=Bonding BONDING_OPTS="mode=1 miimon=100" ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes ifcfg-eth3 DEVICE=eth3 ONBOOT=yes BOOTPROTO=none TYPE=Ethernet MASTER=bond0 SLAVE=yes cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:17:a4:8f:94:b1 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1b:21:56:b8:69 cat /etc/modprobe.conf alias eth0 tg3 alias eth1 tg3 alias eth3 e1000 alias eth2 e1000 alias bond0 bonding options bond0 mode=1 miimon=100 I have tried moving the bonding information out of the ifcfg-bond0 into the modprobe configuration file. It seems that it is stuck in RR and I am trying to get it into the Active-backup (mode 1) state. Any ideas what would be causing this issue?

  Read the article

• Most transparent way to connect two LANS using a WET610N Wireless Bridge

  - by Spencer Ruport

  I have two wired systems hooked to a Linksys WRT54GL wired/wireless router which is also hooked to my internet. I'll refer to this as LAN1. I have two more systems in another room that are connected wirelessly. Recently I decided I would much rather have another wired LAN in the other room and use a bridge to connect them. This would be LAN2. Prior to hooking up the device I assumed that the ethernet side of the bridge would have a DHCP server so that I could simply hook it up to a switch and I'd be on my way. However that isn't the case which leads me to believe I'll have to add one to LAN2 correct? Or is there some way to have the DHCP from LAN1 also hand out IP addresses to LAN2? If I do need a DHCP device on LAN2 what would be best? Another hardware device or should I just install some DHCP software on one of the systems (since they're both on 24/7 anyway). Any recommendations would be appreciated. :)

  Read the article

• SQL Server restore a backup results in an error.

  - by Mario

  I have a database in dev (SQL Server 2005 on Windows Server 2008) that I need to move to prod (SQL Server 2000 on Windows Server 2003). My process is as follows: Login to dev, open SQL Server Management Studio Right click on the database | Tasks | Backup. Keep all default options (full backup etc.) Move .bak file locally to prod (no network drive), login to prod, open SQL Server Enterprise Manager. Right click Databases node | All Tasks | Restore database. Change Restore as database to reflect the same database name. Click radio button 'From device'. Click 'Select Devices' Click Restore from: Add..., browse to .bak file (small - only 6mb) Now I am ready to restore the database, so I click OK and get the following error: "The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE DATABASE is terminating abnormally." This error is immediate. I have tried a few different variations of this - restoring the db to dev machine with a different db name and log file names (where it originated), creating an empty database with the same physical path to files before and trying to restore to that, making a few different .bak files and making sure they are verified before uploading them to prod. I know for a fact the directory for the .mdf and .ldf files exist on prod, though the files themselves don't exist. If, before I click OK to restore, go to the options tab instead I get the following error: Error 3241: The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE FILELIST is terminating abnormally. Anyone have any bright ideas?

  Read the article

• Issue resolving names on Hyper-V guest with Routing and Remote Access

  - by John Sheehan

  I've got a Win2k8 standard server running Hyper-V with a Server 2003 web guest instance running. The host is publicly available on the internet. I've created an Internal Private network in the Hyper-V Virtual Network manager. I've set the host IP for that virtual adapter to 192.168.0.1. I've set the IP on the guest to 192.168.0.2. They can ping each other and share files. I can't browse the web on the guest though. NSLOOKUPs are working. I've tried setting the DNS server setting on the guest to 192.168.0.1 and something external like Google's 8.8.8.8 server to no avail. Windows firewall is disabled on the internal virtual network. I've tried it with both DNS installed on the host and without it. I'm not sure which RRAS/NAT settings are relevant to pass on so ask if you need me to clarify anything. How do I get outbound internet working on the guest VM?

  Read the article

• Nginx - Enable PHP for all hosts

  - by F21

  I am currently testing out nginx and have set up some virtual hosts by putting configurations for each virtual host in its own file in a folder called sites-enabled. I then ask nginx to load all those config files using: include C:/nginx/sites-enabled/*.conf; This is my current config: http { server_names_hash_bucket_size 64; include mime.types; include C:/nginx/sites-enabled/*.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; root C:/www-root; #charset koi8-r; #access_log logs/host.access.log main; location / { index index.html index.htm index.php; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server{ server_name localhost; } } And this is one of the configs for a virtual host: server { server_name testsubdomain.testdomain.com root C:/www-root/testsubdomain.testdomain.com; } The problem is that for testsubdomain.testdomain.com, I cannot get php scripts to run unless I have defined a location block with fastcgi parameters for it. What I would like to do is to be able to enable PHP for all hosted sites on this server (without having to add a PHP location block with fastcgi parameters) for maintainability. This is so that if I need to change any fastcgi values for PHP, I can just change it in 1 location. Is this something that's possible for nginx? If so, how can this be done?

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

  Read the article

• corrupted, hidden, wireless network adapter from "Network Connections" in Windows 7

  - by srihari reddy

  The issue is that when I install a wireless network adapter on my Windows 7 Professional machine I have no connectivity, the system tray icon has a red X. First, I tried the obvious, install updated drivers from the manufacturer. When I did this, the Network Connections icon had gray bars and there was no connectivity. So I tried installling the network adapter on a different computer on the same network and I verified that it does work with no issues. Next, I ran scan disk with no issues. Next, I ran sfc as admin with no issues. At this point I turned to the router and turned SSID broadcast on but that didn't help. I turned MAC address filtering off at the router but that didn't help. Whenever I installed the original network adapter (a wireless N usb adapter with WPA2 TKIP+AES) it showed up as "Wireless Network Connection 2" with a grayed out icon and no connectivity. Lastly, I tried installing two different "verified working" usb wireless adapters on to the Windows 7 Pro machine. The results were the same "Wireless Network Connection 2" that had a green bar icon but no connectivity. I installed the manufacturers software and it indicated the NIC was not there even thought the driver installed successfully in Device Manager. I guess I should mention, I first tried (insanely in vain) to use the (worthless) Windows Network troubleshooter. The results were....drumroll please... There is a problem with the network adapter... well No Duh! Also, during all of this the network adapter is always showing as "Working Properly" in the properties dialogue of Device Manager for the wireless NIC. I checked for hidden devices in Device Manager but there were none. Here is my fundamental question that I've tried to find in the Windows 7 support center with no luck. How do I remove/delete/uninstall network adapters from the Windows 7 registry? in particular hidden, corrupted network adapters, that used to be working.

  Read the article

• Filtered Router Interface

  - by jviotti

  I'm having some problems with a Scientific-Atlanta DPR2320R2. In specific with the WIFI. A few months ago I changed its password and username and now I can't remember. So I tried cracking it with Hydra but it drove things worse. Content of webadmin was rendered partial, and threw lot of errors. I then reseted the router. I found myself abled to browse the web with ethernet-connected pc. Wifi is configured by registering the device's MAC Address, and indeed the router has been reseted and register MAC address were lost. No device could connect to wifi. In fact, the device does not even recognize the network. I tried the pointing to 192.168.0.1 to restablish the MAC's. But I couldn't connect to the router access point. Tried listing up hosts: $ nmap -sP 192.168.0.0/24 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:18 ART Host 192.168.0.1 is up (0.0018s latency). Host 192.168.0.11 is up (0.00025s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 59.62 seconds Then checked 192.168.0.1 was really up by sending pings. It responded to all my pings. I quick-scanned the access point: $ nmap 192.168.0.1 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:08 ART Interesting ports on 192.168.0.1: Not shown: 999 closed ports PORT STATE SERVICE 80/tcp filtered http Nmap done: 1 IP address (1 host up) scanned in 6.73 seconds Look the state of the port 80: FILTERED. I'm pretty confused now. Any suggestion would be appreciated. Thanks in advance.

  Read the article

< Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658  | Next Page >