Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 655/1185 | < Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >

• Wired to wireless bridge in Linux

  - by adrianmcmenamin

  I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

  Read the article

• Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

  - by johnny

  This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Reusing slot numbers in Linux software RAID arrays

  - by thkala

  When a hard disk drive in one of my Linux machines failed, I took the opportunity to migrate from RAID5 to a 6-disk software RAID6 array. At the time of the migration I did not have all 6 drives - more specifically the fourth and fifth (slots 3 and 4) drives were already in use in the originating array, so I created the RAID6 array with a couple of missing devices. I now need to add those drives in those empty slots. Using mdadm --add does result in a proper RAID6 configuration, with one glitch - the new drives are placed in new slots, which results in this /proc/mdstat snippet: ... md0 : active raid6 sde1[7] sdd1[6] sda1[0] sdf1[5] sdc1[2] sdb1[1] 25185536 blocks super 1.0 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] ... mdadm -E verifies that the actual slot numbers in the device superblocks are correct, yet the numbers shown in /proc/mdstat are still weird. I would like to fix this glitch, both to satisfy my inner perfectionist and to avoid any potential sources of future confusion in a crisis. Is there a way to specify which slot a new device should occupy in a RAID array? UPDATE: I have verified that the slot number persists in the component device superblock. For the version 1.0 superblocks that I am using that would be the dev_number field as defined in include/linux/raid/md_p.h of the Linux kernel source. I am now considering direct modification of said field to change the slot number - I don't suppose there is some standard way to manipulate the RAID superblock?

  Read the article

• Creating a partitioned raid1 array for booting a debian squeeze system

  - by gucki

  I'd like to have the following raid1 (mirror) setup: /dev/md0 consists of /dev/sda and /dev/sdb I created this raid1 device using mdadm --create --verbose /dev/md0 --auto=yes --level=1 --raid-devices=2 /dev/sda /dev/sdb This gave a warning about metadata being 1.2 and my system might not boot. I cannot use 0.9 because it restricts the size of the raid to 2TB and I assume grub shipped with latest debian (squeeze) should be able to handle metadata 1.2. So then I created the needed partitions like this: # creating new label (partition table) parted -s /dev/md0 mklabel 'msdos' # creating partitions sfdisk -uM /dev/md0 << EOF 0,4096 ,1024,S ; EOF # making root filesystem mkfs -t ext4 -L boot -m 0 /dev/md0p1 # making swap filesystem mkswap /dev/md0p2 # making data filesystem mkfs -t ext4 -L data /dev/md0p3 Then I mounted the root partition, copied a minimal debian install inside and temporary mounted /dev /proc /sys. Afer this I chrooted to the new root folder and executed: grub-install --no-floppy --recheck /dev/md0 However this fails badly with: /usr/sbin/grub-probe: error: unknown filesystem. Auto-detection of a filesystem of /dev/md0p1 failed. Please report this together with the output of "/usr/sbin/grub-probe --device-map=/boot/grub/device.map --target=fs -v /boot/grub" to I don't think it's a bug in grub (so I didn't report it yet) but a fault of mine. So I really wonder how to properly setup my raid1, everything I tried so far failed.

  Read the article

• xen + debian network after upgrade squeeze to wheeze

  - by rush

  I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

  Read the article

• Sending eMails in a external subnet in vmware ESXi

  - by user80658

  This might be a bit hard for me to explain - and it is a pretty individual situation. I got a native server at Hetzner (www.hetzner.de). The public IP is 88.[...].12. I got ESXi running on this server. I can access the esxi console by the public ip, but none of the virtual machines. That's why I bought a public subnet with 8 (6 usable) IPs (46.[...]) and an additional public ip (88.[...].26). This additional public ip belongs to the first virtual maschine - a firewall appliance - which is connected to the WAN. This need to be done this way - since it is the official way by hetzner. My 46. subnet is behind the firewall. I got a virtualmin server with dovecot imap/pop3 server. When sending a email, most provider (gmail) will accept those mails, but a lot will put it into spam (aol). My theory is: The MX line of my domain says of course the ip of the virtual machine (46.[...]), but in the raw email it says that email is sent by the ip of the firewall (88.[...].26), which doesnt sound trustworthy. A solution would be if the firewall could handle mail, but it simply cant. How can I prevent this problem? Thanks.

  Read the article

• "Dictionary problem." Error with VMPlayer

  - by George Mauer

  I'm pretty new to using vmware virtualization (been a virtualbox user) so I'm hoping you guys can help me out. I recently got an external usb disk containing a vm for a client, downloaded vmplayer, set it up with "Open a Virtual Machine", ran it, easy as pie. After working with it a bit this morning, I shut the VM down and now trying to start it back up again I get this: I tried removing the vm from my library, now it happens whenever I try to add it back in. In the meantime, I can still access other virtual machines so it seems like the problem might be with the virtual disk. So two questions: This is obviously not a very helpful error message. Where can I go to get more information? My Application EventLog doesn't contain anything from VMWare. What steps can I take to fix the problem? Edit: A couple more pieces of information. I did not take any snapshots. I don't think VM Player even has that ability. I have a zip file of (what I assume) is the state of the VM when it was sent to me. I cannot unzip it as it is huge and simply requires more HD space than I have available but I did extract the vmx file and examine it. Other than the UUIDs and the fact that mine reads cleanShutdown = "FALSE" they are identical. The log contains the following lines Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead: Unable to load dict from 'E:....\MachineName.vmsd'. Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead failed for file 'E:....\MachineName.vmx': Dictionary problem (6) Jun 23 10:11:18.082: vmx| SNAPSHOT: Snapshot_TimeStampTiers failed: Dictionary problem (6)

  Read the article

• F5 BIG_IP persistence iRules applied but not affecting selected member

  - by zoli

  I have a virtual server. I have 2 iRules (see below) assigned to it as resources. From the server log it looks like that the rules are running and they select the correct member from the pool after persisting the session (as far as I can tell based on my log messages), but the requests are ultimately directed to somewhere else. Here's how both rules look like: when HTTP_RESPONSE { set sessionId [HTTP::header X-SessionId] if {$sessionId ne ""} { persist add uie $sessionId 3600 log local0.debug "Session persisted: <$sessionId> to <[persist lookup uie $sessionId]>" } } when HTTP_REQUEST { set sessionId [findstr [HTTP::path] "/session/" 9 /] if {$sessionId ne ""} { persist uie $sessionId set persistValue [persist lookup uie $sessionId] log local0.debug "Found persistence key <$sessionId> : <$persistValue>" } } According to the log messages from the rules, the proper balancer members are selected. Note: the two rules can not conflict, they are looking for different things in the path. Those two things never appear in the same path. Notes about the server: * The default load balancing method is RR. * There is no persistence profile assigned to the virtual server. I'm wondering if this should be adequate to enable the persistence, or alternatively, do I have to combine the 2 rules and create a persistence profile with them for the virtual server? Or is there something else that I have missed?

  Read the article

• Extending partition on linux gparted but not more space in the vm

  - by Asken

  I have a vm test installation of a linux running a build server. Unfortunately I just pressed ok when adding the disk and ended up with an 8gb drive to play with. Well into the test the builds are consuming more and more space, of course. The vm drive was resized to 21gb and using gparted I expanded the drive partitions and that all worked fine but when I go back into the console and do df there's still only 8gb available. How can I claim the other 13gb I added? fdisk -l Disk /dev/sda: 21.0 GB, 20971520000 bytes 255 heads, 63 sectors/track, 2549 cylinders, total 40960000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006d284 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 40959999 20229121 5 Extended /dev/sda5 501760 40959999 20229120 8e Linux LVM vgdisplay --- Volume group --- VG Name ct System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 19.29 GiB PE Size 4.00 MiB Total PE 4938 Alloc PE / Size 1977 / 7.72 GiB Free PE / Size 2961 / 11.57 GiB VG UUID MwiMAz-52e1-iGVf-eL4f-P5lq-FvRA-L73Sl3 lvdisplay --- Logical volume --- LV Name /dev/ct/root VG Name ct LV UUID Rfk9fh-kqdM-q7t5-ml6i-EjE8-nMtU-usBF0m LV Write Access read/write LV Status available # open 1 LV Size 5.73 GiB Current LE 1466 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Name /dev/ct/swap_1 VG Name ct LV UUID BLFaa6-1f5T-4MM0-5goV-1aur-nzl9-sNLXIs LV Write Access read/write LV Status available # open 2 LV Size 2.00 GiB Current LE 511 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1

  Read the article

• How can I pair two bluetooth dongles together?

  - by techaddict

  I want to hack a device which connects via USB, and plug a bluetooth USB dongle to the end of the USB cable (using a female to female adapter), and then connect to that device from another USB bluetooth dongle connected to my computer. How can I do this? It is straightforward? I don't want to spend $30 before I know how to do this. Also I think another concern is that the USB cable is providing power to the device. So I think that means I would also have to hack it for power. I have created this diagram in Photoshop to illustrate my intent: (NOTE: it won't be a USB mouse, as that would be pointless because there are already wireless mice in existence. The mouse is displayed for illustrative purposes) Don't tell me "it won't work". Because I KNOW it WILL work. Think for example, PS3 controller. That works, and in fact I was able to get it working with my laptop, over bluetooth. I just want to know HOW to make it work.

  Read the article

• need to bring back win 7

  - by user290513

  I like making music and playing games and occasionally do some Photoshop. I had a windows 8 computer but my mouse pointer always got stuck, so to try out something new I installed Ubuntu. here is how I installed it: Went to advanced statup options clicked on "use a device" after plugging in my bootable USB with Ubuntu replaced my windows 8 and installed Ubuntu 14.04 LTS I hope I did it correctly though. So after a few months I could've really find out a good Audio Production (not LMMS, because I use Stagelight) software nor something that could be familiar to the UI of Photoshop. So I decided to bring back Windows, but because of the bad experience of 8 I thought about bringing back win 7 So I used an app named WinUSB to make my bootable USB drive after formatting it to NTFS in GParted But when I go to my grub menu, my USB doesn't show up and my PC being a UEFI device. I don't know how to get to the bios of my device. Can somebody tell how to install Windows 7 completely and deleting Ubuntu or at least give me a link to a tutorial. I have a netbook: it is an Acer Aspire One 725. I'm fine with using commands in terminal and another thing that my laptop doesn't have a CD drive or reader, I can't put a CD inside

  Read the article

• Get Matrox Millenium video card working in Ubuntu 9.10

  - by wcoenen

  I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• How to set up Windows 7 Professional as a NAS

  - by Enyalius

  I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

  Read the article

• How to back up initial state of external backup drive?

  - by intuited

  I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

  Read the article

• How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it?

  - by Gareth

  I was going to install Fedora 15 along side my Windows 7 Starter on my Acer Apire One D255E and at some point during the resizing of the NTFS partition (the one with Windows on it) the setup failed. Now I cannot access this partition from any OS. When I tried to access it from a Fedora install running on a USB flashdrive I get this error: Error mounting: mount exited with exit code 12: Failed to read last sector (452534271): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? It doesn't make a lot of sense to me but I was really hoping it would to someone and they can give me a way to restore the partition without losing everything on it (I have a lot of important notes from various classes on there)? Cheers.

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• How can I get DVDs playing after a Vista to XP change?

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• Bacula stops writing to disk volume after 2GB

  - by m.list

  Bacula Version: 5.2.5 I have configured bacula to write volumes to disk, however bacula stops writing to the volume as soon as it reaches 2gb. The file system is not an issue as I have stored files larger than 2gb. 06-Dec 17:22 backup-sd JobId 8421: End of Volume "Full-Monthly-0005" at 0:2147475577 on device "FileStorage" (/nfs/backup-pool). Write of 64512 bytes got 8069. 06-Dec 17:22 backup-sd JobId 8421: End of medium on Volume "Full-Monthly-0005" Bytes=2,147,475,578 Blocks=33,288 at 06-Dec-2012 17:22. backup1@backup:/nfs/backup-pool$ ls -alh Full-Monthly-0005 <br> -rw-r----- 1 bacula tape 2.0G Dec 3 16:14 Full-Monthly-0005 bacula-dir.conf: Pool { Name = Full-Monthly Pool Type = Backup Recycle = yes Volume Retention = 5 months Volume Use Duration = 1 day Maximum Volumes = 5 Maximum Volume Bytes = 12gb } bacula-sd.conf: Device { Name = FileStorage Media Type = File Archive Device = /nfs/backup-pool LabelMedia = yes # lets Bacula label unlabeled media Random Access = Yes RemovableMedia = no AlwaysOpen = no Label media = yes Maximum Volume Size = 12gb } In my original configuration Maximum Volume Bytes and Maximum Volume Size were not set at all and so should have defauted to no maximum but that did not work either.

  Read the article

• zfs pool error, how to determine which drive failed in the past

  - by Kendrick

  I had been copying data from my pool so that I could rebuild it with a different version so that I could go away from solaris 11 and to one that is portable between freebsd/openindia etc. it was copying at 20mb a sec the other day which is about all my desktop drive can handle writing from the network. suddently lastnight it went down to 1.4mb i ran zpool status today and got this. pool: store state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: none requested config: NAME STATE READ WRITE CKSUM store ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c8t3d0p0 ONLINE 0 0 2 c8t4d0p0 ONLINE 0 0 10 c8t2d0p0 ONLINE 0 0 0 it is currently a 3 x1tb drive array. what tools would best be used to determine what the error was and which drive is failing. per the admin doc The second section of the configuration output displays error statistics. These errors are divided into three categories: READ – I/O errors occurred while issuing a read request. WRITE – I/O errors occurred while issuing a write request. CKSUM – Checksum errors. The device returned corrupted data as the result of a read request. it was saying low counts could be any thing from a power flux to a disk event but gave no suggestions as to what tools to check and determine with.

  Read the article

• Protocol (or service publish/discovery) to detect devices in network

  - by Gobliins

  we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

  Read the article

• Redirect without changing URL

  - by Coobadivin

  Here's the setup. We have a hardware load balancer with an http virtual cluster. Let's call this virtual cluster example1.com. This virtual cluster load balances between two squid reverse proxies which are also on the same physical servers as the web servers. Squid listens on 80 and points to itself as the cache_peer web server which listens on 81. We also have a standalone web server which we will call example2.com. What we are trying to do is create a subdirectory on example1.com called example1.com/example2. This will point to example2.com, but we want our users to stay at example1.com/example2 in their browser. So, it's like a redirect without actually being a redirect. How the hell do I go about doing this? Is this even possible? I'm looking at squid docs in the meantime. example1.com is running a proprietary web server - not Apache :( We can't host example2.com's content in example1.com's file system. These are two very different platforms.

  Read the article

• Howto detect fake RAM

  - by Michael

  I just bought a virtual server which should have 2GB of RAM. Now i got a server with 4gb which looks very strange to me. I think it is just a virtual RAM. dmidecode only ouputs /dev/mem: Operation not permitted How can i check if it's a real RAM or just a virtual one? free -m outputs: total used free shared buffers cached Mem: 4093 364 3728 0 0 346 -/+ buffers/cache: 18 4074 Swap: 0 0 0 Output from cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 137: kmemsize 8922287 10194944 2145910784 2145910784 0 lockedpages 0 0 523904 523904 0 privvmpages 13387 59112 9223372036854775807 9223372036854775807 0 shmpages 769 785 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numproc 22 54 9223372036854775807 9223372036854775807 0 physpages 93377 106010 0 1047808 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 2471 2473 9223372036854775807 9223372036854775807 0 numtcpsock 5 21 9223372036854775807 9223372036854775807 0 numflock 4 13 9223372036854775807 9223372036854775807 0 numpty 1 1 9223372036854775807 9223372036854775807 0 numsiginfo 0 39 9223372036854775807 9223372036854775807 0 tcpsndbuf 102592 381632 9223372036854775807 9223372036854775807 0 tcprcvbuf 81920 4820184 9223372036854775807 9223372036854775807 0 othersockbuf 4624 61632 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 9248 9223372036854775807 9223372036854775807 0 numothersock 39 56 9223372036854775807 9223372036854775807 0 dcachesize 4178917 4232732 1072955392 1072955392 0 numfile 378 535 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numiptent 24 24 9223372036854775807 9223372036854775807 0

  Read the article

< Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >