Search Results

Search found 19928 results on 798 pages for 'multiple constructors'.

Page 652/798 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >

• Easiest way to do host name resolution with IPA?

  - by Luke

  We are currently using static LAN IP addresses for our internal non-public facing servers. We don't have DHCP configured. We're using Vyatta for our router and firewall. The firewall is configured to be zone based. We want to setup IPA for centralized authentication (LDAP+Kerberos). IPA is requiring resolvable host names. I want to avoid having to enter DNS records by hand. What is the most painless way to make host names resolvable that works with IPA in a Linux only environment? We arn't using anything to resolve host names now. Up until now we've been using static ip addresses and local users on each server. We've looked at BIND, DHCP (does that even solve the problem?), and multicast DNS. At this point we're not sure which solution would work best. Is there another option we haven't considered? Security is very important. We have multiple zones where each zone has very specific or no access to another zone. DNS for public domains is forwarded from Vyatta to our ISP's DNS server.

  Read the article

• Computer randomly shuts itself off

  - by Decency

  I have not been able to determine a pattern for why this happens, despite my best efforts. I've attempted to run it on full power with Prime95 and this doesn't trigger a restart. Generally the restarts occur while I'm playing games, watching videos, or even just having multiple tabs open in a browser. However, I often play processor intense games for hours without any restarts occurring, and sometimes they'll happen 3-4 times in an hour during less intense activity, so I don't think that is the problem. I imagine it has something to do with overheating or power consumption so I've been monitoring CPU temperature and cleaning with compressed air, but the problem keeps happening. I don't know how to track power consumption, and assume that this is the problem. Whenever this occurs, the sound gets stuck in a short loop of whatever was playing at the time, though restarts also occur when nothing is playing. Here is a screenshot of temperatures: and under load: Here's the parts list: http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=10546754 As shown in the list, the case includes a 585W Power Supply, which I've been told should be plenty. I built the computer myself with a friend's guidance but it's very possible I did something wrong. Right now I'm looking into ensuring that I have the latest drivers for all components. Any help would be appreciated- thanks.

  Read the article

• Can a OS be copied from one hard drive to another and still boot?

  - by AlexMorley-Finch

  Background My computer gets stuck on the make and model screen after the BIOS screen, aka the Toshiba screen. After some research I've realized that the problem is the hard drive. I'm using an old 250gb model that USED to be used for backup purposes, however I loaded windows 7 ultimate onto it This hard drive has trouble getting up to full RPM therefore cannot boot correctly until its warmed up. meaning that my pc needs to be restarted several times before it boots (once it took my 13 reboots to get my pc on!) From my research its either that, or lack of power supply, and I've tried multiple PSUs. Question I have my OS and all my files on this 250gb HDD... If I were to literally open the explorer, and copy EVERYTHING (including hidden files obviously) from this 250gb, to a spare 500gb I've got knocking about... Will it boot if I just copy everything? I cannot be bothered to load another OS onto my PC so if there is a way I can just copy the existing one over from one HDD to another and have it boot normally. This would be epic! I've heard about HDD cloning software. But before I purchase and/or download this software, I need to know if i can just copy the OS over through the windows explorer

  Read the article

• Install multiport module on iptables

  - by tarteauxfraises

  I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp The result of iptables -L -n -v command : $ iptables -L -n -v Chain INPUT (policy ACCEPT 6 packets, 456 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 3 packets, 396 bytes) pkts bytes target prot opt in out source destination Chain fail2ban-apache (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 What can i do to compile or to enable the multiport module? Thanks in advance for your help

  Read the article

• Uninstalled server 2008 now router won't handle DHCP

  - by john

  My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

  Read the article

• NAT via iptables and virtual interface

  - by Alex

  I'm trying to implement the following scenario: One VM-host, multiple guest VMs, each one gets its own IP-address (and domain). Our server has only one physical interface, so the intended use is to add virtual interfaces on eth0. To complicate our situation the provider uses port-security on their switches, so I can't run the guest interfaces in bridged mode, because then the switch detects a "spoofed" MAC-address and kills the interface (permanently, forcing me to call the support, which I'm sure will get them a little bit angry the third time ;) ). My first guess was to use iptables and NAT to forward all packages from one virtual interface to another one, but iptables doesn't seem to like virtual interfaces (at least I can't get it to work properly). So my second guess is to use the source IP of the packages to the public interface. Let's assume libvirt creates a virbr0-network with 192.168.100.0/24 and the guest uses 192.168.100.2 as IP-address. This is what I tried to use: iptables -t nat -I PREROUTING --src public_ip_on_eth0:0 -p tcp --dport 80 -j DNAT --to-destination 192.168.100.2:80 That doesn't give me the intended results either (accessing the server times out). Is there a way to do what I'm trying to do, or even to route all traffic to a certain IP on a virtual interface to the VM's device?

  Read the article

• Setup ejabberd with SQL Server 2008

  - by wonster

  Here's what I have got so far. Windows 2008 Server 64 bit. Installed the latest version of ejabberd, ejabberd-2.1.8-windows-installer.exe. The windows service starts up fine but seems ineffective. However, using the start & stop scripts work. I am able to login to the admin page which so far doesn't seem that versatile. Opened up ports 5222, 5226 and 5280 for my workstation to talk to the server. I've got Spark and Jabbear Windows clients to register, login and instant message with multiple accounts using the server. After confirming that I've got the very basics working, I've decided to make use of SQL Server 2008 as the database. Reason? Mainly, I am very comfortable with SQL Server. I can deal with redundancy, failover, data analysis easily. Not sure if ejabberd's built in DB provides all that. Following the instructions from ejabberd's documentation, I setup a system DSN that points to another physical database. The DSN checks out fine. (Tried both Named Pipes and TCP/IP) Modified ejabberd.cfg. Commented line %%{auth_method, internal} and uncommented line {auth_method, odbc} Uncommented and modified {odbc_server, "DSN=ejabberd;UID=somelogin;PWD=somepassword"}. After making these changes, I restarted. No errors are found in the log files. The jabber clients are no longer able to register new accounts. I'm not sure where to look for errors besides the /logs/ folder as I'm new to all this. I am basically stuck here on step 5. Has anyone got this setup to work recently? Some of the posts I've found around are years old and of no help. I can't be the only one setting up ejabberd with MS SQL. Any help would be appreciated!

  Read the article

• McAfee ePolicy-Orchestrator (ePO) - policy ownership by groups?

  - by bkr

  Is there a way to grant ownership of an ePO policy to a group? Alternatively, is there a permission that can be set that would allow owners of an ePO policy to add other owners to that policy without making them ePO admin? In the case I'm looking at, ePO is deployed within a large heterogeneous organization with a large amount of delegation in the form of create/modify policy rights to allow multiple IT departments to customize to their needs for their sections of the system tree. The problem is that the policies are owned by the creator of the policy. This causes problems when they leave (staff turnover) or when other people on their teams need the ability to modify the existing policy. Unfortunately, as far as I can see, only someone who is an ePO admin can change the owners. Even the owner of the policy cannot add other owners (unless they are also an ePO admin). Ideally, I should be able to assign ownership of a policy to a group - since that would be easier to manage than me or another admin having to continually fix policy ownership or remove orphaned polices. Even just allowing the owners of the polices to add other owners would be sufficient. How are other people handling policy ownership when dealing with a large amount of delegated control of polices? Is there a way to delegate this out without making users full ePO admins?

  Read the article

• 100% uptime for a web application

  - by Chris Lively

  We received an interesting "requirement" from a client today. They want 100% uptime with off-site failover on a web application. From our web application's viewpoint, this isn't an issue. It was designed to be able to scale out across multiple database servers, etc. However, from a networking issue I just can't seem to figure out how to make it work. In a nutshell, the application will live on servers within the client's network. It is accessed by both internal and external people. They want us to maintain an off-site copy of the system that in the event of a serious failure at their premises would immediately pick up and take over. Now we know there is absolutely no way to resolve it for internal people (carrier pigeon?), but they want the external users to not even notice. Quite frankly, I haven't the foggiest idea of how this might be possible. It seems that if they lose Internet connectivity then we would have to do a DNS change to forward traffic to the external machines... Which, of course, takes time. Ideas? UPDATE I had a discussion with the client today and they clarified on the issue. They stuck by the 100% number, saying the application should stay active even in the event of a flood. However, that requirement only kicks in if we host it for them. They said they would handle the uptime requirement if the application lives entirely on their servers. You can guess my response.

  Read the article

• Troubles with apache and virtual hosts

  - by xZero

  I have a BIG problem. I have VPS with Debian OS, and LAMP installed. Fresh install. For control panel i using Webmin. Now i trying to setup multiple sub-domains on my server using webmin for example: downloads.my-domain.com cpanel.my-domains.com forum.my-domains.com But problem what is happening is next, while i using no virtual hosts, everything works perfectly when i accessing it using my-domain.com, but when i add Virtual host, i cann access it but my-domain.com becomes unavilable because it redirects to virtual hosts i added. When i add more than 2 virtual hosts, problem is still here. Also, when i try to access to virtual server for example downloads.my-domain.com, it redirects again to cpanel.my-domains.com When i delete virtual hosts, access to my-domain.com is succesfull... What i known: - That is not problem with my domain provider. I correctly added subdomains and added host record to my VPS IP. - I added unique name to every single virtual host. - There are no two same virtual hosts - Every virtaul hosts have own directory: for example: downloads.my-domain.com have own WWW dir: /var/downloads Can somebody help me? Thanks.

  Read the article

• umask seems to vary by user

  - by paullb

  I've got a development Ubuntu system for which I have several users: myself (with full sudo) and about 5 other users. (I've set up the system so everything in this respect is still at its default setting) I'm trying to set the system up so that multiple people can collaborate in a single directory by using grouing and I want the default permissions to be 664. However when some users edit files the permissions were 644. After a lot of investigating most users have a umask (checked at the prompt) of 0002 and when they create files they are 664 (as expected) but there are 2 (myself and one other) who have 0022 umask (so the files that come out are 644 and nobody else can write to them). I've looked everywhere but can't figure out why a couple users wind up with a different umask e.g. there is nothing the .bash_profile or anything like that) Any ideas for the source of the discrepancy? /etc/bashrc if [ $UID -gt 199 ] && [ "`id -gn`" = "`id -un`" ]; then umask 002 else umask 022 fi /etc/profile if [ $UID -gt 199 ] && [ "`id -gn`" = "`id -un`" ]; then umask 002 else umask 022 fi EDIT: My (bad) ~/.bashrc # .bashrc # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi # User specific aliases and functions export LANG=en_US.utf8 Other user (good) .bashrc # .bashrc # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi # User specific aliases and functions

  Read the article

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated.

  Read the article

• Is 1GB + 1GB RAM better than 2GB +0.5GB?

  - by pibboater

  My laptop has two slots for RAM, and currently has two 512 MB chips, for 1 GB. Windows XP is running terribly slow on it, so I want to upgrade the RAM. I could buy two 1 GB chips to replace both of the current 512 MB chips, to give me 2 GB of RAM. Or, the price is the same to buy one 2 GB chip, to replace just one of the 512 MB chips, and give me 2.5 GB total. The RAM it takes is PC2-4200 533MHz DDR2. What do you think would be better: buying two 1 GB chips so it can take advantage of dual-channel operation, or buying one 2 GB chip to end up with more total RAM but not dual-channel operation? Like I said, price is the same, so performance is the only consideration. I'm not doing anything especially intensive like video or photo editing -- just having multiple Office programs open, playing music, browsers, etc., but currently even opening the first application takes forever. If it matters, the laptop is a Toshiba Qosmio G25-AV513 running Windows XP Media Center SP3. Thanks! Kevin

  Read the article

• Windows Server 2008 IIS Random disconnect

  - by d123

  I am having a bit of a quirk with my IIS server. I'm running my IIS with 2 sets of IPs configured, one in the 192 range and the other in 172 range. I then have multiple apps which will talk to this server for information. Server has no AV or firewalls configured. I noticed that my apps when talking to the server on the 172 range, at random intervals, the server would just not respond. My apps would then disconnect and just try again, and every thing would be fine. This doesn't happen on the 192 range. So what I did is on a Linux box I did a watch command and to wget a file every half second on the 172 and 192 IPs. I noticed the same issue, every once in awhile wget on the 172 range would not get through, but there is no issues at all on 192. Thus I went around to Wireshark and did a dump. This is the last 3 packets, no other packets were received. 7010 100.871877 200.100.30.7 172.0.0.1 TCP 59619 http [ACK] Seq=140 Ack=85242 Win=64128 Len=0 TSV=1072818795 TSER=1660246133 7011 100.872238 200.100.30.7 172.0.0.1 TCP 59619 http [FIN, ACK] Seq=140 Ack=85242 Win=64128 Len=0 TSV=1072818796 TSER=1660246133 7013 100.873081 200.100.30.7 172.0.0.1 TCP 59619 http [ACK] Seq=141 Ack=85243 Win=64128 Len=0 TSV=1072818796 TSER=1660246133 So this is my issue, there is a random disconnect every once in awhile. The server doesn't receive the next SYN packet. HELP?

  Read the article

• ms excel 2010 in windows xp - when open workbook the data is formatted differently than when i saved it

  - by Justin

  I haven't been able to find an answer to this. I have multiple files that I use regularly in excel that now have cell formats of "date". Every single cell in the entire workbook (all sheets) is now formatted as "date". The problem is that I lost my formatting for percents, numbers years, etc and now everything is converted to date (xx/xx/xxxx). I am able to open previously saved versions of a file (prior to me having the problem) and the cells are formatted as I intend them to be (percents, numbers, general, as well as dates). Since this has happened on a couple different files recently, I am wondering how this is happening and how do I prevent it from happening in the future. I cannot cure the problem just by highlighting the entire sheet and converting back to general because I lose all my percents and number formatting. Example (Correct formatting): Month Year Working Days MTD POS Curr Rem May 2012 22 0 1,553,549 June 2012 22 0 1,516,903 June 2011 22 0 1,555,512 June 2010 22 0 1,584,704 Example (Incorrect formatting): Month Year Working Days MTD POS Curr Rem June Tuesday, July 04, 1905 Wednesday, January 04, 1900 Wednesday, January 18, 1900 213,320 July Tuesday, July 04, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 314,261 July Monday, July 03, 1905 Wednesday, January 04, 1900 Sunday, January 15, 1900 447,759 July Sunday, July 02, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 321,952 Sorry for the mess. Any suggestions?

  Read the article

• User receives group membership error to terminal server even though has rights

  - by BlueToast

  http://www.hlrse.net/Qwerty/TSLoginMembership.png To log on to this remote computer, you must be granted the Allow log on through Terminal Services right. By default, members of the Remote Desktop Users group have this right. If you are not a member of the Remote Desktop Users group or another group that has this right, or if the Remote Desktop User group does not have this right, you must be granted this right manually. Only as of today a particular user began receiving this message for a second terminal server they use; otherwise, they have never had any problems authenticating into this server. We have no restrictions on simultaneous and multiple logins. On each terminal server, we have a group and security group like "_Users" locally in the Builtin\Remote Desktop Users group. For this particular user, on this particular terminal server we have locally given him Administrator, Remote Desktop Users, and Users membership; in AD we have given him DOMAIN\Administrator, Builtin\Remote Desktop Users, DOMAIN\_Users. It still gives us that error message. We gave him membership to another terminal server (random) by simply making him member of another DOMAIN\_Users group -- successfully able to login to that random terminal server. So, from scratch we created an AD account 'dummy' (username) with only Domain Users membership. Tried to login to this particular server, no success. So I added 'dummy' to DOMAIN\_Users group, and then was successfully able to login. Other users from this user's department are able to login to this particular server just fine as well. We checked the Security logs on this particular server, and while it is logging everything, the only thing it appears to not log are these failed login attempts from this particular user who receives this error message. We have tried rebooting the server, and the user is still receiving that error message.

  Read the article

• Remote Desktop Services Licensing - Does server have to have a RDS role?

  - by transistor1

  I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

  Read the article

• Suspected Corrupted Windows 7 MBR?

  - by AridDecay

  So, this may not be the correct place to put up my question, but i'll give it a shot. I'm having an issue repairing this computer. It was brought to me with the described issue of 'Not turning on' Later, I found that it would come with the error of 'No boot sector found on internal hard drive.' I assumed it was an MBR issue due to a virus or cutting a Windows update short. I booted into my trusty recovery enviroment and ran bootrec.exe /FIXMBR and restarted -- No luck I started to think (After multiple attempts to get the MBR sorted out, including creating a new boot sector) that the Hard-drive was possibly starting to cave in on itself, so I booted into a linux bootable CD and went to check the SMART data. Odd, say's it's inaccessible. That seems odd to me, considering it's a newer (two years old or so) Windows 7 computer. All new Hard-drives have SMART. So, I checked the BIOS. No mention of SMART anywhere. Greaaaat. I decided as a last-ditch effort to switch the hard-drive type to ATA in the BIOS (God knows why, I was getting frusterated) instead of AHCI. VOILA! It actually attempts to boot, gets halfway through the little windows animation, does an incredibly (Half a second) quick BSOD, and shuts down. Does anyone have ideas on what's going on here? I'm at my wits end.

  Read the article

• Synchronize folder on network, preserving hard links

  - by Waleed Hamra

  I have few computers using Windows XP Pro. I want to synchronize/back a folder from one machine, to another one. This far, It's a simple problem, and I've used FreeFileSync for such operations, with very satisfactory results. But, this all changes when hard links come into play. Today's folder contains lots of hard links, using such backup programs will result in hard links being treated as multiple files, and copied as such, greatly increasing folder size on destination, and defeating the purpose of using all these hard links in the first place. It gets more complicated when we take into consideration the fact that network shares on Windows DON'T expose hard linking facilities, meaning that running a hard-link-aware tool like rsync using --hard-links will be of no use. So my question, how can i backup my folder to the other computer, while preserving hard links? I don't mind installing 3rd party tools to do it, as obviously, the standard windows shares approach won't work... I am guessing there might be some tool that can be installed on both machines and works in a server/client mode? anyone has any idea how to do this?

  Read the article

• Apache, logerror and logrotate: what is the best method?

  - by OlivierDofus

  Here's a vhost example of my sites: <VirtualHost *:80> DocumentRoot /datas/web/woog ServerName woog.com ServerAlias www.woog.com ErrorLog "|/httpd-2.2.8/bin/rotatelogs /logs/woog/error_log 86400" CustomLog "|/httpd-2.2.8/bin/rotatelogs /logs/woog/access_log 86400" combined DirectoryIndex index.php index.htm <Location /> Allow from All </Location> <Directory /*> Options FollowSymLinks AllowOverride Limit AuthConfig </Directory> </VirtualHost> I've got 12 sites running now. This gives something like: [Shake]:/sources/software/mod_log_rotate# ps x | grep rotate /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/error_log 86400 /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/error_log 86400 [snap (as many error_log as virtual hosts)] /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/access_log 86400 /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/access_log 86400 [snap (as many access_log as virtual hosts)] grep rotate [Shake]:/sources/software/mod_log_rotate# !!! I've been looking everywhere but I've only found mod_log_rotate. The "little" problem is that the author (very good C developper) explains: "Unfortunately Apache error logs are handled in such a way that we can't work the same log rotation magic on them. Like transfer logs they support piped logging though so you can still use rotatelogs for them. " So my question is: what would be the best way to handle multiple logs? If I just do a very classical log and I use the system's "logrotate" program couldn't this be a good deal? How would/do you deal with that? Thank you!

  Read the article

• How to deal with ssh's "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!"?

  - by Vi.

  I often need to login to multiple remote stations that are just placed to the same static IPs for me. SSH complains about changed keys in this case: $ ssh [email protected] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ... Offending RSA key in /home/vi/.ssh/known_hosts:70 ... I usually just run vim /home/vi/.ssh/known_hosts +70, dd wq and re-run the SSH command. How to do it simpler? Requirements: The warning should be displayed, and not like this: The authenticity of host '172.1.2.3 (172.1.2.3)' can't be established. It is easy to accept the key change. I expect something like this: $ ssh [email protected] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ... The fingerprint for the RSA key sent by the remote host is 82:cd:be:7a:ae:1b:91:2c:23:c1:74:4d:8a:38:10:32. Change the host key in /home/vi/.ssh/known_hosts (yes/no)? yes Warning: Changed host key for '172.1.2.3' (RSA) in the list of known hosts. [email protected]'s password: Simple and differs from usual "The authenticity of host can't be established." message.

  Read the article

• How to perform this Windows 7 permissions change on many files via GUI or command line

  - by hippietrail

  After using my external hard drive on another Windows 7 computer to tweak photos with Windows Live Photo Gallery then upload them to Facebook I found the modified images were now not visible on the original Windows 7 computer. I'm not sure if the things I tried to get it working subsequently changed anything, but I do know this is the sequence of actions that makes the permissions of the modified files match those of the unmodified files: Right click on broken image file, select "Properties" On the "Security" tab press the "Advanced" button In the "Permissions" tab press the "Continue" button with the shield icon on it Tick the box marked "Include inheritable permissions from this object's parent Click the "Remove" button to remove the only current entry "Type: Allow, Name: Administrators (XYZ\Administrators), Permission: Full control, Inherited From: OK on the "Permissions" tab. OK on the "Security" tab. Now this same procedure does not work at the folder level. It results in "access denied" dialogs. I'm looking for some way to perform this exact modification on all the images I edited on the other computer. I'm happy to use the Windows GUI in Explorer or any other included tools. I'm happy to use the Windows command line. I'd prefer not to use a third-party tool since I'd have to be satisfied it's not doing anything else. I'm not looking for a different way to change permissions to other settings to make an external drive full of photos editable on multiple computers. At least not in this question.

  Read the article

• How to always show titles on Windows 7 Taskbar thumbail preview?

  - by Cooper

  I often use the Win+n shortcuts to 'alt-tab' between windows of pinned application (i.e. Win+2 to basically 'alt-tab' multiple putty windows, where putty is pinned as app #2 on the taskbar). The Win+n always pops up the thumbnail previews of all the windows, but sometimes it shows window titles above the thumbnail, sometimes it doesn't. Is there any way to always show the titles (i.e. registry setting?)? For putty sessions this would be especially nice, as the title contains the hostname, and the thumbnail is too small to determine what host that window is for. I've noticed that the titles usually show up with there are more than ~4-6 windows of that pinned item open - but the number seems to vary - is there a threshold setting for this? Update: So I just noticed the titles show up whenever the taskbar buttons combine, which varies based on how many windows from other apps are open... So I'm now looking for a way to combine buttons (but I'd like to keep labels, so the options in the 'Taskbar and Start Menu Properties' are close, but probably finding the registry settings behind should do it.

  Read the article

• linux shutdown hang with wifi cifs mounts

  - by Sirex

  Since fedora 15 (and now with 16) it seems that wireless clients take a long while to shutdown when they have network filesystems mounted at shutdown time. I've pushed out a cifs mount via puppet, and all clients have it, including those on wireless. If say a laptop is on a wired connection it shuts down just fine, but if its on the wifi at the time (and no wired connection) it'll hang at the fedora f logo. I'm not sure if its indefinite or just a really long while, but ill give it a test when i shut this machine down in a second. Needless to say its pretty annoying, so is there a way of causing the machine to shutdown even if network connectivity has been lost at unmount time, -- or an official way to reorder events so the wireless card is kept up until after the unmount happens during the shut down process (short of writing a custom script for shutdowns which is a bit of a kludge) ? It does this on multiple machines, and all started doing it when we went from fedora 14 to 15. It was such an obvious issue i'd kind of assumed someone must have reported it or there was an easy fix, but i've not discovered anything yet. Additional info: I can confirm that manually unmounting the mounts then shutting down (sudo shutdown or the xfce shutdown button) will shutdown just fine, it only hangs if the mounts are still mounted The puppet config that sets the mount looks like this (now with the _netdev entry that is indeed pushed to clients successfully, but makes no difference): file { "/mnt/share": ensure = directory,} mount { "/mnt/share": atboot = true, ensure = mounted, remounts = false, fstype = cifs, device = "//srv/share", options = "user,gid=shareusers,uid=${user},file_mode=0700,dir_mode=0700,credentials=/root/.smbcreds,_netdev", require = [ File["/mnt/share"], Group["shareusers"] ], } }

  Read the article

• Desktop appliciations are unable to launch my browser in Windows 8 [migrated]

  - by Alex Ford

  I have a fresh copy of Windows 8 Pro installed from MSDN. I have Google Chrome installed (stable channel) and it is set as my default browser. I even went into Control Panel Default Programs to ensure that Chrome had all its defaults. When other desktop applications try to launch my browser they always fail. For example, while trying to install the Android SDK for Windows the installer accurately detected that I did not have the JDK installed. It provides a friendly button to visit java.oracle.com. When pressing this button, nothing happens at all. You can see that here: http://youtu.be/XXL8GhuWWg0 If it were only that application that was having issues I wouldn't think anything of it but I have been encountering similar issues all over the place. Probably the most irritating one is when visual studio has updates; clicking the update button does nothing. http://www.youtube.com/watch?v=zwd1mn3TId0 You can see in that screencast that Visual Studio is not able to launch the browser no matter what I click. The update button doesn't do anything and neither do the two links in the update's description. Any suggestions? I'm assuming it's a Windows issue since it is happening in multiple applications.

  Read the article

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >