Search Results

Search found 29133 results on 1166 pages for 'week number'.

Page 652/1166 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >

• Reminder: True WCF Asynchronous Operation

  - by Sean Feldman

  A true asynchronous service operation is not the one that returns void, but the one that is marked as IsOneWay=true using BeginX/EndX asynchronous operations (thanks Krzysztof). To support this sort of fire-and-forget invocation, Windows Communication Foundation offers one-way operations. After the client issues the call, Windows Communication Foundation generates a request message, but no correlated reply message will ever return to the client. As a result, one-way operations can't return values, and any exception thrown on the service side will not make its way to the client. One-way calls do not equate to asynchronous calls. When one-way calls reach the service, they may not be dispatched all at once and may be queued up on the service side to be dispatched one at a time, all according to the service configured concurrency mode behavior and session mode. How many messages (whether one-way or request-reply) the service is willing to queue up is a product of the configured channel and the reliability mode. If the number of queued messages has exceeded the queue's capacity, then the client will block, even when issuing a one-way call. However, once the call is queued, the client is unblocked and can continue executing while the service processes the operation in the background. This usually gives the appearance of asynchronous calls.

  Read the article

• Home network with Windows 7 as router

  - by Michael

  Background: I have tried to use routers, but so far all of them can't handle the bandwidth, number of connections eventually limited by the hardware resources, so overall the home routers are decreasing the internet speed. I went through DD-WRT and stuff like that. Question: What I want is to use my Windows7 PC as router. It has 2 LAN cards. I'm going to connect to this router another desktop 2 pcs and notebook through wireless router. The main question is what is the most efficient way to turn this Windows7 box(and I need Windows for native NTFS support) into router with NAT/Routing/Firewall functionality? Is there any routing software recommended for this purpose or I should just use windows native "Internet Sharing"? I'm going to run SIP phones in the LAN, so I need friendly NAT(Full cone perhaps). Also I'm going to have FTP server on that Windows7 "server" PC. As firewall I'm thinking about Comodo. Need to drop all incoming, unless explicitly allowed.

  Read the article

• Google Webmasters Tools strange 404 errors referred from same site

  - by Out of Control

  Starting about a month ago, I noticed a sudden increase in 404 errors in Webmasters Tools for one of my sites (over 1400 errors so far). All the errors are being referred from my own site to non existent pages. The 404 error URLs are all of the same format: URL: http://www.helloneighbour.com/save/1347208508000 The number on the end appears to be a timestamp followed by 3 zeros. The referring page, in this case is : Linked from http://www.helloneighbour.com/save/cmw-insurance-insurance-burnaby When I look at the source code of that page, or I use Webmaster tools to view the page as Google sees it, I can't find any link that comes close to what is above. I built the site, and I can't find any place that might be causing these false links either. The server logs (access and error) don't show Google or anyone else trying to access these links. I've marked all these pages as fixed, and waited a couple of weeks, only to find the errors come back again over the last few days. I'm wondering if anyone else has seen anything strange like this, or if someone might have a way for me to debug, replicate this error myself.

  Read the article

• Dvorak hotkey remapping in vim, worth it?

  - by Bryan Ward

  I've been trying to learn the dvorak keyboard layout of late and I have been making some good progress this time around. The trouble I am finding now is that all of my hotkeys are all in the wrong places. As a vim user this is particularly troubling. I have found good resources to switch the bindings back so that they are in the places in vim, but I wonder if this is worth it. I also use set -o vi in my ~/.zshrc file so that I can use the familiar bindings in the terminal as well. hjkl navigation is also featured in a number of other applications such as less. For those of you out there who have successfully made the switch, is it worth remapping things to be familiar again, or is it better in the long run to just deal with weirdly placed hotkeys?

  Read the article

• Identify ENCRYPTED compressed files at the command line

  - by viking

  I have directories with hundreds of RAR files. Currently I use Powershell 2.0 with a script that utilizes WinRAR's RAR utility to decompress the files. The issue is that a small number of the files end up being encrypted, which pauses the script and requires interaction. Is there any way to do one of the following: Identify the encrypted files before trying to decompress Entirely ignore the encrypted files Automate an incorrect (or correct) password that will attempt to open the file, but just skip it if incorrect. NOTE: Some of the compressed files encrypt just file contents, whereas others encrypt file name and file contents. Relevent Code: $files = Get-ChildItem foreach($file in $files) { if($file.Attributes -eq "Archive") { $folder = $file.basename rar x $file $folder\ -y } }

  Read the article

• Integrating Windows Form Click Once Application into SharePoint 2007 &ndash; Part 1 of 2

  - by Kelly Jones

  Last year, I had the opportunity to build a solution that involved integrating a Windows Form application into a SharePoint 2007 (WSS version 3.0). In this post, I’ll layout our architecture thinking and in part two, I’ll describe the technical details. Business Case Our challenge was this: we needed an easy way for a small group of our users to upload documents, in batches.  They also needed to quickly set the meta data values, as well as set security on individual files. Using the out of the box uploads just didn’t fit.  The single file upload allows set the meta data, but our users would be uploading dozens of files.  The multiple upload would allow our users to upload batches of files, but it doesn’t allow them to set the meta data during upload.  Also, neither upload method allows the users to set the permissions on the file. Our Solution We looked into building a web control of some kind, but ruled that out due to security complexities (if I remember correctly).  Another option would have been using a technology like Silverlight (or Flash?), but our team didn’t have the skills necessary to build with these. So, after looking at what was technically possible, and also what skills our team had, we settled on a Windows Form application.  We also decided to deliver it to the clients via Click Once, so we would have the ability to easily update the application in the future. Lessons Learned After deploying our solution, we’ve learned a few lessons.  First, you’ll need to have the .Net Framework installed on the client computers.  We knew this, but we still ran into issues making sure our users had the proper framework version installed.  Second, we had issues with authentication.  Our issues were due to our testing domain being a separate Active Directory domain from the domain that our end users and their workstations were members of.  (See my earlier post about Clearing Saved Passwords for the fix to our problem). Our third issue was how we dealt with uploading files that were named the same.  Our application would replace the existing file with the new file, which is the way we expected it to work.  However, our users wanted to upload weekly reports, named the same as the previous week.  We solved this by using folders within the document library to keep the sets of reports separate from previous weeks. One last thing to consider before implementing a solution like this, is what browsers and platforms your users will be working from.  We only needed to support IE and Windows, which works fine.  However, if you need to support Firefox, there are add-ons that allow Click Once to work with Firefox.  This is still a Windows only solution though.  In order to support Macs, you’d have to focus on either browser techniques (AJAX?) or Silverlight/Flash. Summary Our users are happy with the Click Once app.  It allowed them to move all of their content to our SharePoint site in under a couple hours, which they were thrilled with.  We’re happy because we can easily deploy updates, our development time was small, and we met all of our business requirements.

  Read the article

• apache performance improvements and maxclients

  - by updog

  I know this has been asked a few (thousand) times around the internet but I was hoping someone whose in the know might be able to comment on my particular setup. I have a web server hosting one site (php/codeigniter) with a wordpress blog in a sub directory. The server has 2GB RAM, 3GHz CPU and I have offloaded the static assets to CloudFlare which is has reduced bandwidth for the actual server by almost 75%. The problem I have is when an email campaign is sent out that links to the site or blog, it slows down. Below is my settings in apache2.conf. Average apache process size is 80M and there is 1.5GB available for apache. <IfModule mpm_prefork_module> StartServers 8 MinSpareServers 5 MaxSpareServers 20 MaxClients 20 MaxRequestsPerChild 2000 </IfModule> I have already setup and installed apc and built some caching into the site and used w3totalcache on the blog. The number of concurrent users is around 2-300 when there is a campaign, are there any further optimisations before

  Read the article

• TFS Build 2010: BuildNumber and DropLocation

  - by javarg

  Automatic Builds for Application Release is a current practice in every major development factory nowadays. Using Team Foundation Server Build 2010 to accomplish this offers many opportunities to improve quality of your releases. The following approach allow us to generate build drop folders including the BuildNumber and the Changeset or Label provided. Using this procedure we can quickly identify the generated binaries in the Drop Server with the corresponding Version. Branch the DefaultTemplate.xaml and renamed it with CustomDefaultTemplate.xaml Open it for edit (check out) Go to the Set Drop Location Activity and edit the DropLocation property. Write the following expression: BuildDetail.DropLocationRoot + "\" + BuildDetail.BuildDefinition.Name + "\" + If(String.IsNullOrWhiteSpace(GetVersion), BuildDetail.SourceGetVersion, GetVersion) + "_" + BuildDetail.BuildNumber Check in the branched template. Now create a build definition named TestBuildForDev using the new template. The previous expression sets the DropLocation with the following format: (ChangesetNumber|LabelName)_BuildName_BuildNumber The first part of the folder name will be the changeset number or the label name (if triggered using labels). Folder names will be generated as following: C1850_TestBuildForDev_20111117.1 (changesets start with letter C) LLabelname_TestBuildForDev_20111117.1 (labels start with letter L) Try launching a build from a Changeset and from a Label. You can specify a Label in the GetVersion parameter in the Queue new Build Wizard, going to the Parameters tab (for labels add the “L” prefix):

  Read the article

• iPhone Shell - is there any?

  - by alee

  While working on iphone security architecture, i came to know that i can run applications from other applications in iphone. referring to the following url http://iphonedevelopertips.com/cocoa/launching-other-apps-within-an-iphone-application.html for example, i can put a link in a website with following hyperlink skype:// will result skype to run and call at particular number. Now i have few concerns here. is there a shell running in background in iphone, so that it allows other application to run basic app commands. if the above statement is true then how can i enable or run commands directly into iphone shell? if above statements are false, then could you please explain how these commands are being executed? is this part of iPhone SDK? or this funcationality is iPhone OS

  Read the article

• How is it that during extraction of a zip, I get two files of the same name in the same path?

  - by Howiecamp

  I'm extracting a zip (self-extracting, but that probably doesn't matter) and for a few files I'm getting a dialog asking me if I want to replace a file that was already extracted with a file that's just about to be extracted. At first glance I didn't understand how a zip could contain the same file in the same place more than once. I then browsed to the file in question using 7zip (or any tool) and found this: http://www.flickr.com/photos/46007162@N03/5278220416/ The difference is in the block number. What's actually happening here?

  Read the article

• How to Unban an IP properly with Fail2Ban

  - by psp

  I'm using Fail2Ban on a server and I'm wondering how to unban an IP properly. I know I can work with IPTables directly: iptables -D fail2ban-ssh <number> But is there not a way to do it with the fail2ban-client? In the manuals it states something like: fail2ban-client get ssh actionunban <IP>. But that doesn't work. Also, I don't want to /etc/init.d/fail2ban restart as that would lose all the bans in the list.

  Read the article

• Dynamic group membership to work around no nested security group support for Active Directory

  - by Bernie White

  My problem is that I have a number of network administration applications like SAN switches that do not support nested groups from Active Directory Domain Services (AD DS). These legacy administration applications use either LDAP or LDAPS. I am fairly sure I can use Active Directory Lightweight Directory Services (AD LDS) and possibly Windows Authorization Manager to work around this issue; however I am not really sure where to start. I want to end up with: A single group that can be queried over LDAP/LDAPS for all it’s direct members LDAP proxy for user name and password credentials to AD DS Easy way to admin the group, ideally the group would aggregate the nested membership in AD DS. a native solution using freely available components from the Windows stack. If you have any suggestions or solutions that you have previously used to solve this issue please let me know.

  Read the article

• Post MIX10 Decompression

  - by Dave Campbell

  With a big dose of reality, I walked into this place this morning and found out "yeah, I really do write .NET web apps and MS Access for a living" :( ... but it pays the bills and I've gotten *way* used to eating 3 times a day :) MIX10 was great, although the buzz didn't seem as big as MIX09, and I'm not sure why. It also seemed like a different crowd and other folks I talked to agreed with that. Of course now I can outwardly admit that the "Windows Phone 7 Series" is programmed with Silverlight ... how cool is that? I've been biting my tongue about that info for over a month! I cloistered myself in Ballroom A for the week, not counting the Keynotes. That's where the phone sessions were located. I tried to collect the full set, but ended up bailing on the last one because it was ending at the time that MIX10 was ending, and I hadn't spent a whole lot of time in 'The Commons'. I met a bunch of folks I've blogged about, or exchanged email with, and that's always fun. Renewed associations with folks I only see once or twice a year and way too long a list and don't want to mention some and leave off others... I did have an opportunity to meet Charles Petzold... wow that was interesting... I got into Windows development through Charles' Programming Windows 3.1 book 'back in the day' ... couldn't find anyone at Honeywell wanted to join my journey, so it was just me and 'Chuck' :) ... read every word of that book more than once... all marked up, tags sticking out of it. And now he's writing a WP7 book ... gotta get it: Free ebook: Programming Windows Phone 7 Series (DRAFT Preview) I went through my Big List-o-BlogsTM last night and it took over 2 hours because of all the new content since MIX10. I've got 90 posts tagged as of 9PM on 3/21. If everybody stopped right now, it would take me 9 days to push what I have now, so you'll have to be patient! I had another event on Thursday that was *extremely* tiring, so I ended up staying over another night. I drove back into the strip on Friday morning to try to find a non-cheesy souvenir for my wife, and didn't find much. Then I went to Blueberry Hill restaurant for 3 eggs, 3 strips of bacon, and 3 awesome potato pancakes. Check them out if you have time! And then hit the road. In case anyone is wondering, the 2-1/2 hour drive I took across Hoover Dam on Sunday afternoon only took 30 minutes on Friday afternoon... that was a more normal trip! I thoroughly enjoyed the time I spent with everyone. Thanks to John Papa and his crew for the great Insider's party on Monday night... the Blues Brothers were a fun surprise and they did a good job! And the swag was great... thanks to all the contributors for a fun evening at their expense! All I can say is stay tuned, go to live.visitmix.com/videos and watch everything, get the phone tools, start working... everything's different and everything's fun... jump in, it's all Silverlight! Stay in the 'Light! Technorati Tags: Silverlight    Silverlight 4    Windows Phone     MIX10

  Read the article

• Le Logiciel Libre – Omniprésent dans le secteur public

  - by gravax

  NOTE : Cet article a servi de base à du contenu publié en Juin 2011 dans le magazine Acteurs Publics. Créé il y a plusieurs décennies déjà, pour répondre à un besoin de partage de savoir, et de compétences, le Logiciel Libre existe sous plusieurs appellations, à l'origine anglo-saxonnes, dont « Free Software » et « Open Source » sont les plus utilisées. En Anglais, le mot « Free » pouvant signifier à la fois libre et gratuit, cela a créé une certaine confusion qui n'existe pas en Français avec le mot « libre ». Du coup, on voit souvent l’acronyme FOSS ou FLOSS, pour « Free, Libre, Open Source Software » afin d'éliminer l’ambiguïté. De nos jours, dans le secteur public, le logiciel libre est, depuis, devenu omniprésent. Il répond à plusieurs besoins critiques dont le contrôle des coûts, le choix (de partenaire, de logiciel, de fonctionnalités), la liberté de pouvoir modifier les applications pour les adapter à ses propres besoins, la sécurité provenant du fait que de nombreux développeurs et utilisateurs ont pu contrôler la qualité du code. Un autre aspect très présent dans les logiciels libres et l'adhérence quasi-systématique aux standards de l'industrie, qui garantit une intégration simple et facile au système d'information existant. Il y a cependant des éléments à prendre en compte lors des choix de logiciels libres stratégiques. Si l'aspect coûts est clairement un élément de choix qui peut conduire aux logiciels libres, il est principalement dû au fait qu'un logiciel libre existe souvent en version gratuite, librement téléchargeable. Mais ceci n'est que le le sommet de l'iceberg. Lors de la mise en production de logiciels il va falloir s'entourer de services dont l'intégration, où les possibilités de choix d'un partenaire seront d'autant plus grandes que le logiciel choisi est populaire et connu, ce qui conduira à des coups tirés vers le bas grâce à une concurrence saine. Mais il faudra aussi prévoir le support technique. La encore, la popularité du logiciel choisi augmentera la palette de prestataires de support possible. Le choix devra se faire suivant des critères très solides, et en particulier la capacité à s'engager sur des niveaux de service, la disponibilité 24 heures sur 24, 7 jours sur 7 (le pays ne s’arrête pas de fonctionner le week-end ou la nuit), et, éventuellement, la couverture géographique correspondant aux métiers que l'on exerce (un pays comme la France couvrant avec ses DOM et ses TOM une grande partie des fuseaux horaires et zones géographiques de la planète). La plus part des services publics, que ce soit éducation, santé, ou gouvernement, utilisent déjà des logiciels libres. On les retrouve coté infrastructure, avec des produits comme la base de données MySQL, fortement appréciée dans le monde de l'éducation pour construire des plate-formes d'e-éducation en conjonction avec d'autres produits libres tels Moodle, ou GlassFish, le serveur d'applications très prisé des développeurs pour son adhérence au standard Java EE version 6 et sa simplicité de mise-en-œuvre. Linux est extrêmement présent comme système d'exploitation libre dans le datacenter, mais aussi sur le poste de travail. On retrouve des outils de virtualisation tels Oracle VM, issu de Xen, dans le datacenter, et VirtualBox sur le poste du développeur. Avec une telle palette de solutions et d'outils dans le monde du Logiciel libre, Oracle se apporte au secteur public des réponses ciblées, efficaces, aux besoins du marché, y compris en matière de support technique et qualité de service associée.

  Read the article

• Gamify your Web

  - by Isabel F. Peñuelas

  Yesterday Valencia welcomed the Gamification World Congress that I follow virtually through #GWC2012. BBVA, Iberia, Ligeresa, Axe, Wayra, ESADE, GlaxoSmithKline, Macmillan, Gamisfaction, Nomaders, Blaffin were among the companies presenting success stories on gaming. It has been proved that people remember things easily when an emotion is created. The marketing expectations around Gamification techniques have a lot to do with Neuromarketing theories. There are a lot of expectations on internal enterprise Gamification. In the public Web some sectors are taking the lead on following the trend. The Gartner Analyst Brian Burke opened another Gamification recent event in Madrid remembering that “Gamification is mostly about Engagement”, and this can be applied both to customers or employees. Gamification and Banking The experience of the Spanish Financial Group BBVA that just launched BBVA Game was also presented a week ago at the BBVA Innovation Centre during the event “Gamification & Banking: a fad or a serious business?” . One of the objectives of the BBVA Game was to double the name of registered users. “People like the efficiency of the online channel want to keep a one-to-one contact with the brand”-explained Bernardo Crespo. Another interested data coming out the BBVA presentation was that “only 20% of Spanish users –out of the total holders of Bank Accounts in the country- is familiar with the use of a Web Site to consult their bank accounts”, the project aims also to reverse this situation helping people to learn making a heavy use of the Video in the gaming context. In general Banking presenters seem to agree that Gamification techniques are helping to increase the time spent on the Web. Gamification and Health Using Gamification techniques for chronic illness rehabilitation was another topic of the World Congress. Here you can find some ideas and experiences What can games do for the health (In Spanish) I have personally started my own mental-health gaming project at http://www.lumosity.com/ Gamification in the Enterprise I really recommend Reading this excellent post of Ultan ÓBroin my Introduction to Gamification and Applications. Employee´s motivation and learning are experiencing a 360º turn and it looks than some of us will become soon the Dragon of the year instead of the Employee of the Year. Using Web 2.0 Tools for Gamification Projects  What type of tools do we need for a quick-win Gamification project? To certain extend Gamification can be considered an evolution of the participative Web. Badging, avatars, points and awards, leader boards, progress charts, virtual currencies, gifting and giving challenges and quests are common components and elements. The Web is offering new development frameworks to that purpose as this Avatar Framework from Paypal or Badgeville to include in web applications. Besides, tools to create communities around a game are required to comment, share and vote players as well as for an efficient multimedia management. Due to its entirely open architecture, its community features, and its multimedia and imaging solutions is were I see WebCenter as a tool helping brands to success. Link to Sources & Recommended Readings YouTube Video of BBVAGame presentation Where To Apply Gamification In Your Incentive Jim Calhoun Cancer Challenge Ride and Walkh For my Spanish Readers El aburrimiento es el enemigo número uno del éxito

  Read the article

• Problem restarting my Ubuntu system

  - by VoY

  Whenever I try to restart my Ubuntu either from the command line by typing reboot or in GNOME the computer goes from X to console, starts the shutdown process and then a message saying "[ some number ] Starting new kernel" appears on the screen and the computer goes back to X login screen. I suspect this must have something to do with nvidia drivers, because it seemed to have appeared around the time I bought a new graphic card. Also, when I reboot the second time I see weird graphical artifacts on the screen. When I boot from ubuntu live cd I can reboot just fine. I used jaunty, recently I switched to karmic with no change. This bug is very annoying, because I have to hard reset my computer in order to reboot. Also not good for the filesystems, I suspect. Can you suggest a way to debug the cause or if not at least the easiest way to go about reinstalling ubuntu without losing customizations/settings/data?

  Read the article

• OFM 11g: Implementing OAM SSO with Forms

  - by olaf.heimburger

  There is some confusion about the integration of OFM 11g Forms with Oracle Access Manager 11g (OAM). Some say this does not work, some say it works, but.... Actually, having implemented it many times I belong to the later group. Here is how. Caveat Before you start installing anything, take a step back and consider your current implementation and what you really need and want to achieve. The current integration of Forms 11g with OAM 11g does not support self-service account creation and password resets from the Forms application. If you really need this, you must use the existing Oracle AS 10.1.4.3 infrastructure. On the other hand, if your user population is pretty stable, you can enjoy the latest Forms 11g with OAM 11g. Assumptions The whole process should be done in one day. I assume that all domains and instances are started during setup, if you need to restart them on demand or purpose, be sure to have proper start/stop scripts, I don't mention them. Preparation It goes without saying, that you always should do a proper backup before you change anything on your production environment. With proper backup, I also mean a tested and verified restore process. If you dared to test it before, do it now. It pays off. Requirements For OAM 11g to work properly you need a LDAP repository. For the integration of Forms 11g you need an Oracle Internet Directory (OID) configured with the Oracle AS SSO LDAP extensions. For better support I usually give the latest version a try, in this case OID 11g is a good choice.During the Installation and Integration steps we use an upgrade wizard that needs the old OID configuration on the same host but in a different ORACLE_HOME. Installation vs Configuration With OFM 11g Oracle introduced a clear separation between Installation of the binaries (the software) and the Configuration of the instances (the runtime). This is really great as you can install all the software and create new instances when needed. In the following we adhere to this scheme and install the software first and then configure the instances later. Installation Steps The Oracle documentation contains all the necessary steps for the installation of all pieces of software. But some hints help to avoid traps and pitfalls. Step 1 The Database Start the installation with the database. It is quite obvious but we need an Oracle database for all the other steps. If you have one at hand, fine. If not, just install at least a Oracle 10.2.0.4 version. This database can be on a different host. Step 2 The Repository Creation Utility The next step should be to run the Repository Creation Utility (RCU). This is a client application that just needs to connect to your database. It can be run on any host that can reach the database and is a Windows or Linux 32-bit machine. When you run it, be sure to install the OID schema and the OAM schema. If you miss one of these, you can run the RCU again to install the missing schema. Step 3 The Foundation With OFM 11g Oracle started to use WebLogic Server 11g (WLS) as its foundation for all OFM 11g installation. We therefore install it first. Depending on your operating system, it might be possible, that no native installer is available. My approach to this dilemma is to use the WLS Generic Installer for all my installations. It does not include a JDK either but if you have both for your platform you are ready to go. Step 3a The JDK To make things interesting, Oracle currently has two JDKs in its portfolio. The Sun JDK and the JRockit JDK. Both are available for a number of platforms. If you are lucky and both are available for your platform, install both in a separate directory (and not one of your ORACLE_HOMEs) each, You can use the later as you like. Step 3b Install WLS for OID and OAM With the JDK installed, we start the generic installer with java -jar wls_generic.jar.STOP! Before you do this, check the version first. It should be 1.6.0_18 or later and not the GCC one (Some Linux distros have it installed by default). To verify the version, issue a java -version command and make sure that the output does not contain the text gcj and the version matches. If this does not work, use an absolute path like /opt/java/jdk1.6.0_23/bin/java to start the installer. The installer allows you to specify a path to install the software into, say /opt/oracle/iam/11.1.1.3 for the OID and OAM installation. We will call this IAM_HOME. Step 4 Install OID Now we are ready to install OID. Start the OID installer (in the Disk1 directory) and just select the installation only step. This will install the software only and does not configure the instance. Use the IAM_HOME as the target directory. Step 5 Install SOA Suite The IAM 11g Suite uses the BPEL component of the SOA Suite 11g for its workflows. This is a pretty closed environment and not to be used for SCA Composites. We install the SOA Suite in $IAM_HOME/soa. The installer only installs the binaries. Configuration will be done later. Step 6 Install OAM Once the installation of OID and SOA is done, we are ready to install the OAM software in the same IAM_HOME. Make sure to install the OAM binaries in a directory different from the one you used during the OID and SOA installation. As before, we only install the software, the instance will be created later. Step 7 Backup the Installation At this point, I normally do a backup (or snapshot in a virtual image) of the installation. Good when you need to go back to this point. Step 8 Configure OID The software is installed and now we need instances to run it. This process is called configuration. For OID use the config.sh found in $IAM_HOME/oid/bin to start the configuration wizard. Normally this runs smoothly. If you encounter some issues check the Oracle Support site for help. This configuration will also start the OID instance. Step 9 Install the Oracle AS SSO Schema Before we install the Forms software we need to install the Oracle AS SSO Schema into the database and OID. This is a rather dangerous procedure, but fully documented in the IAM Installation Guide, Chapter 10. You should finish this in one go, do not reboot your host during the whole procedure. As a precaution, you should make a backup of the OID instance before you start the procedure. Once the backup is ready, read the chapter, including every note, carefully. You can avoid a number of issues by following all the steps and will succeed with a working solution. Step 10 Configure OAM Reached this step? Great. You are ready to create an OAM instance. Use the $IAM_HOME/iam/common/binconfig.sh for this. This will open the WLS Domain Creation Wizard and asks for the libraries to be installed. You should at least select the OAM with Database repository item. The configuration will also start the OAM instance. Step 11 Install WLS for Forms 11g It is quite tempting to install everything in one ORACLE_HOME. Unfortunately this does not work for all OFM packages. Therefore we do another WLS installation in another ORACLE_HOME. The same considerations as in step 3b apply. We call this one FORMS_HOME. Step 12 Install Forms In the FORMS_HOME we now install the binaries for the Forms 11g software. Again, this is a install only step. Configuration starts with the next step. Step 13 Configure Forms To configure Forms 11g we start the Configuration Wizard (config.sh) in FORMS_HOME/bin. This wizard should create a new WebLogic Domain and an OHS instance! Do not extend existing domains or instances! Forms should run in its own instances! When all information is supplied, the wizard will create the domain and instance and starts them automatically.Step 14 Setup your Forms SSO EnvironmentOnce you have implemented and tested your Forms 11g instance, you can configured it for SSO. Yes, this requires the old Oracle AS SSO solution, OIDDAS for creating and assigning users and SSO to setup your partner applications. In this step you should consider to create every user necessary for use within the environment. When done, do not forget to test it. Step 15 Migrate the SSO Repository Since the final goal is to get rid of the old SSO implementation we need to migrate the old SSO repository into the new OID structure. Additionally, this step will also migrate all partner application configurations into OAM 11g. Quite convenient. To do this step, you have to start the upgrade agent (ua or ua.bat or ua.cmd) on the operating system level in $IAM_HOME/bin. Once finished, this wizard will create new osso.conf files for each partner application in $IAM_HOME/upgrade/temp/oam/.Note: At the time of this writing, this step only works if everything is on the same host (ie. OID, OAM, etc.). This restriction might be lifted in later releases. Step 16 Change your OHS sso.conf and shut down OC4J_SECURITY In Step 14 we verified that SSO for our Forms environment works fine. Now, we are shutting the old system done and reconfigure the OHS that acts as the Forms entry point. First we go to the OHS configuration directory and rename the old osso.conf  to osso.conf.10g. Now we change the moduleconf/mod_osso.conf  to point to the new osso.conf file. Copy the new osso.conf  file from $IAM_HOME/upgrade/temp/oam/ to the OHS configuration directory. Restart OHS, test forms by using the same forms links. OAM should now kick in and show the login dialog to ask for your user credentials.Done. Now your Forms environment is successfully integrated with OAM 11g.Enjoy. What's Next? This rather lengthy setup is just the foundation for your growing environment of OAM 11g protections. In the next entry we will show that Forms 11g and ADF Faces 11g can use the same OAM installation and provide real single sign-on. References Nearly everything is documented. Use the documentation! Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1 Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1, Chapter 11-14 Oracle® Fusion Middleware Administrator's Guide for Oracle Access Manager 11gR1, Appendix B Oracle® Fusion Middleware Upgrade Guide for Oracle Identity Management 11gR1, Chapter 10   

  Read the article

• Commit in SQL

  - by PRajkumar

  SQL Transaction Control Language Commands (TCL)                                           (COMMIT) Commit Transaction As a SQL language we use transaction control language very frequently. Committing a transaction means making permanent the changes performed by the SQL statements within the transaction. A transaction is a sequence of SQL statements that Oracle Database treats as a single unit. This statement also erases all save points in the transaction and releases transaction locks. Oracle Database issues an implicit COMMIT before and after any data definition language (DDL) statement. Oracle recommends that you explicitly end every transaction in your application programs with a COMMIT or ROLLBACK statement, including the last transaction, before disconnecting from Oracle Database. If you do not explicitly commit the transaction and the program terminates abnormally, then the last uncommitted transaction is automatically rolled back.   Until you commit a transaction: ·         You can see any changes you have made during the transaction by querying the modified tables, but other users cannot see the changes. After you commit the transaction, the changes are visible to other users' statements that execute after the commit ·         You can roll back (undo) any changes made during the transaction with the ROLLBACK statement   Note: Most of the people think that when we type commit data or changes of what you have made has been written to data files, but this is wrong when you type commit it means that you are saying that your job has been completed and respective verification will be done by oracle engine that means it checks whether your transaction achieved consistency when it finds ok it sends a commit message to the user from log buffer but not from data buffer, so after writing data in log buffer it insists data buffer to write data in to data files, this is how it works.   Before a transaction that modifies data is committed, the following has occurred: ·         Oracle has generated undo information. The undo information contains the old data values changed by the SQL statements of the transaction ·         Oracle has generated redo log entries in the redo log buffer of the System Global Area (SGA). The redo log record contains the change to the data block and the change to the rollback block. These changes may go to disk before a transaction is committed ·         The changes have been made to the database buffers of the SGA. These changes may go to disk before a transaction is committed   Note:   The data changes for a committed transaction, stored in the database buffers of the SGA, are not necessarily written immediately to the data files by the database writer (DBWn) background process. This writing takes place when it is most efficient for the database to do so. It can happen before the transaction commits or, alternatively, it can happen some times after the transaction commits.   When a transaction is committed, the following occurs: 1.      The internal transaction table for the associated undo table space records that the transaction has committed, and the corresponding unique system change number (SCN) of the transaction is assigned and recorded in the table 2.      The log writer process (LGWR) writes redo log entries in the SGA's redo log buffers to the redo log file. It also writes the transaction's SCN to the redo log file. This atomic event constitutes the commit of the transaction 3.      Oracle releases locks held on rows and tables 4.      Oracle marks the transaction complete   Note:   The default behavior is for LGWR to write redo to the online redo log files synchronously and for transactions to wait for the redo to go to disk before returning a commit to the user. However, for lower transaction commit latency application developers can specify that redo be written asynchronously and that transaction do not need to wait for the redo to be on disk.   The syntax of Commit Statement is   COMMIT [WORK] [COMMENT ‘your comment’]; ·         WORK is optional. The WORK keyword is supported for compliance with standard SQL. The statements COMMIT and COMMIT WORK are equivalent. Examples Committing an Insert INSERT INTO table_name VALUES (val1, val2); COMMIT WORK; ·         COMMENT Comment is also optional. This clause is supported for backward compatibility. Oracle recommends that you used named transactions instead of commit comments. Specify a comment to be associated with the current transaction. The 'text' is a quoted literal of up to 255 bytes that Oracle Database stores in the data dictionary view DBA_2PC_PENDING along with the transaction ID if a distributed transaction becomes in doubt. This comment can help you diagnose the failure of a distributed transaction. Examples The following statement commits the current transaction and associates a comment with it: COMMIT     COMMENT 'In-doubt transaction Code 36, Call (415) 555-2637'; ·         WRITE Clause Use this clause to specify the priority with which the redo information generated by the commit operation is written to the redo log. This clause can improve performance by reducing latency, thus eliminating the wait for an I/O to the redo log. Use this clause to improve response time in environments with stringent response time requirements where the following conditions apply: The volume of update transactions is large, requiring that the redo log be written to disk frequently. The application can tolerate the loss of an asynchronously committed transaction. The latency contributed by waiting for the redo log write to occur contributes significantly to overall response time. You can specify the WAIT | NOWAIT and IMMEDIATE | BATCH clauses in any order. Examples To commit the same insert operation and instruct the database to buffer the change to the redo log, without initiating disk I/O, use the following COMMIT statement: COMMIT WRITE BATCH; Note: If you omit this clause, then the behavior of the commit operation is controlled by the COMMIT_WRITE initialization parameter, if it has been set. The default value of the parameter is the same as the default for this clause. Therefore, if the parameter has not been set and you omit this clause, then commit records are written to disk before control is returned to the user. WAIT | NOWAIT Use these clauses to specify when control returns to the user. The WAIT parameter ensures that the commit will return only after the corresponding redo is persistent in the online redo log. Whether in BATCH or IMMEDIATE mode, when the client receives a successful return from this COMMIT statement, the transaction has been committed to durable media. A crash occurring after a successful write to the log can prevent the success message from returning to the client. In this case the client cannot tell whether or not the transaction committed. The NOWAIT parameter causes the commit to return to the client whether or not the write to the redo log has completed. This behavior can increase transaction throughput. With the WAIT parameter, if the commit message is received, then you can be sure that no data has been lost. Caution: With NOWAIT, a crash occurring after the commit message is received, but before the redo log record(s) are written, can falsely indicate to a transaction that its changes are persistent. If you omit this clause, then the transaction commits with the WAIT behavior. IMMEDIATE | BATCH Use these clauses to specify when the redo is written to the log. The IMMEDIATE parameter causes the log writer process (LGWR) to write the transaction's redo information to the log. This operation option forces a disk I/O, so it can reduce transaction throughput. The BATCH parameter causes the redo to be buffered to the redo log, along with other concurrently executing transactions. When sufficient redo information is collected, a disk write of the redo log is initiated. This behavior is called "group commit", as redo for multiple transactions is written to the log in a single I/O operation. If you omit this clause, then the transaction commits with the IMMEDIATE behavior. ·         FORCE Clause Use this clause to manually commit an in-doubt distributed transaction or a corrupt transaction. ·         In a distributed database system, the FORCE string [, integer] clause lets you manually commit an in-doubt distributed transaction. The transaction is identified by the 'string' containing its local or global transaction ID. To find the IDs of such transactions, query the data dictionary view DBA_2PC_PENDING. You can use integer to specifically assign the transaction a system change number (SCN). If you omit integer, then the transaction is committed using the current SCN. ·         The FORCE CORRUPT_XID 'string' clause lets you manually commit a single corrupt transaction, where string is the ID of the corrupt transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to specify this clause. ·         Specify FORCE CORRUPT_XID_ALL to manually commit all corrupt transactions. You must have DBA privileges to specify this clause. Examples Forcing an in doubt transaction. Example The following statement manually commits a hypothetical in-doubt distributed transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to issue this statement. COMMIT FORCE '22.57.53';

  Read the article

• Watchguard firebox: public IP addresses behind firewall with as much usable IP addresses as possible

  - by martinezpt

  Our ISP assigned us 16 public IP addresses that we want to assign to hosts behind a Watchguard firebox x750e. The IP addresses are: x.x.x.176/28 of which x.x.x.177 is the gateway. The hosts will be running software that needs to be directly assigned the public IP address so 1:1 NAT is not an option. I found this document that gives examples on how to assign public IP addresses to hosts behind the firewall, using an optional interface: http://www.watchguard.com/help/configuration-examples/public_IP_behind_XTM_configuration_example_(en-US).pdf However, I can't implement scenario 1 as it won't allow me to use the same subnet on both interfaces. As for scenario 2, splitting the address range into 2 subnets will decrease the usable hosts on the optional interface to 5 (8 - network - broadcast - optional interface ip). I'm convinced that there must be a better way to address this problem and maximize the number of usable IP addresses but I'm not very familiar with this specific firewall. Are there any suggestions on how to keep the hosts behind the firewall with public IP addresses while maximizing the usable IP addresses? thanks

  Read the article

• Printing a dynamic sheet as one document

  - by Sux2Lose

  I have a spreadsheet structured as follows: Summary section at the top Detail section on the bottom Summary section summarizes the detail section which is filtered using auto filters There are ten products that all need to be printed individually, but I want the page footer to show the overall page position of all the print jobs and the total number of pages. That is probably not clear. So for example, if I print the two page Product A view it will print page 1 of 2 and 2 of 2. If I print the one page Product B it will show page 1 of 1. What I want is to print both and have Product A show Page 1 of 3, Page 2 of 3, and Product B be Page 3 of 3. Is there any way to accomplish this?

  Read the article

• Are there any tools for monitoring individual Apache virtual hosts in real-time?

  - by Dave Forgac

  I'm looking for a way to monitor and record Apache traffic, separated by virtual host. I am currently using Munin to capture this and other data for the entire server however I can't seem to find a way to do this by vhost. This link describes using a module called mod_watch which is apparently no longer in development: http://www.freshnet.org/wordpress/2007/03/08/monitoring-apaches-virtualhost-with-munin/ The file that is listed as being compatible with Apache 2.x is reported to have problems with missing vhosts an reporting data correctly. Does anyone know of a reliable way to determine real-time traffic per vhost? If I can find this it should be easy enough to write a new Munin plugin. Edit: What I'd really like to see is something similar to the Apache server-status scoreboard page with the number of connections / requests separated by virtual host. This would give me the ability to check which vhost may be experiencing a spike in traffic in real time and would also provide the data needed for a Munin module (or some alternative performance monitoring / analysis system.)

  Read the article

• nginx terminates connection after 65k bytes

  - by David Wolever

  I've got nginx configured as a front-end to a Python application running under gunicorn, but nginx is terminating connections after about 65k of data have been sent. For example, I've got a view which looks like this: def debug_big_file(request): return HttpResponse("x" * 500000) But when I access that URL through nginx, I only get 65283 bytes: $ curl https://example.com/debug/big-file | wc … curl: (18) transfer closed with outstanding read data remaining 0 1 65283 Note that everything works as expected when accessing gunicorn directly: $ curl http://localhost:1234/debug/big-file | wc … 0 1 500000 The relevant nginx config: location / { proxy_pass http://localhost:1234/; proxy_redirect off; proxy_headers_hash_bucket_size 96; } And nginx version 1.7.0 Some other facts: The number of bytes is consistent from request to request, but it varies based on the content (I first noticed it with a large PNG file, which was cut off after 65,372 bytes, not 65,283) 110k bytes are sent correctly (ie, "x" * 110000 returns all 110,000 bytes), but 120k bytes are not tcpdump suggests that nginx is sending a RST packet to gunicorn:

  Read the article

• What I Expect From Myself This Year

  - by Lee Brandt

  I am making it a point not to call them resolutions, because the word has become an institution and is beginning to have no meaning. That's why I end up not keeping my resolutions, I think. So in the spirit of holding myself to my own commitments, I will make a plan and some realistic goals. 1.) Lose weight. Everyone has this on their list, but I am going to be conservative and specific. I currently weigh 393lbs. (yeah, I know). So I want to plan to lose 10lbs per month, that's 1lb. every three days, that shouldn't be difficult if I stick to my diet and exercise plan. - How do I do this?     - Diet: vegetarian. Since I already know I have high blood pressure and borderline high cholesterol, a meat-free diet is in order. I was vegan for a little over 2 years in 2006-2008, I think I can handle vegetarian.     - Exercise: at least 3 times (preferably every day) a week for 30 minutes. It has to be something that gets my heart rate up, or burns in my muscles. I can walk for cardio to start and mild calisthenics (girly push-ups, crunches, etc.).         - Move: I spend all my time behind the computer. I have recently started to use a slight variation of the Pomodoro Technique (my Pomodoros are 50 minutes instead of 25). During my 10 minutes every hour to answer emails, chats, etc., I will take a few minutes to stretch. 2.) Get my wife pregnant. We've been talking about it for years. Now that she is done with graduate school and I have a great job, now's the time. We'll be the oldest parents in the PTA most likely, but I don't care. 3.) Blog More. Another favorite among bloggers, but I do have about six drafts for blog posts started. The topics are there all I need to do is flesh out the post. This can be the first hour of any computer time I have after work. As soon as I am done exercising, shower and post. 4.) Speak less. Most people want to speak more. I want to concentrate on the places that I enjoy and that can really use the speakers (like local code camps), rather than trying to be some national speaker. I love speaking at conferences, but I need to spend some more time at home if we're going to get pregnant. 5.) Read more. I got a Kindle for Christmas and I am loving it so far. I have almost finished Treasure Island, and am getting ready to pick my next book. I will probably read a lot of classics for 2 reasons: (1) they teach deep lessons and (2) most are free for the Kindle. 6.) Find my religion. I was raised Southern Baptist, but I want to find my own way. I've been wanting to go to the local Unitarian Church, so I will make a point to go before the end of March. I also want to add a few religious books to my reading list. My boss bought me a copy of Lee Strobel's The Case for Christ: A Journalist's Personal Investigation of the Evidence for Jesus , and I have a copy of Bruce Feiler's Abraham: A Journey to the Heart of Three Faiths (P.S.) . I will start there. Seems like a lot now that I spell it out like this. But these are only starters. I am forty years old. I cannot keep living like I am twenty anymore. So here we go, 2011.

  Read the article

• Windows FAT/NTFS Low-Level Disk Viewer (Norton DiskEdit alternative)

  - by Synetech inc.

  Hi, One of my most valuable software tools has always been Norton DiskEdit from Norton Utilities/Symantec Systemworks. I have used it for years for so many things, including, but not limited to learning file-systems. I am now in search of a similar tool that can let me view FAT and NTFS disks at a low and high level under Windows. I have seen Runtime Software’s DiskExplorer, but unfortunately, it is limited in a number of ways, particularly annoying is that it does not really let you view the disk as structured (it does not let you see directory entries from a directory that is fragmented like DiskEdit can without doing a too-exhaustive scan which doesn’t even work for FAT partitions that have cluster sizes <4KB). Does anyone know of a Windows alternative of a Norton DiskEditor? Thanks a lot.

  Read the article

• TiVo Follow-up&hellip;Training Opportunities

  - by MightyZot

  A few posts ago I talked about my experience with TiVo Customer Service. While I didn’t receive bad service per se, I felt like the reps could have communicated better. I made the argument that it should be just as easy to leave a company as it is to engage with a company, even though my intention is to remain a TiVo fan. I worked for DataStorm Technologies in the early 90s. I pointed out to another developer that we were leaving files behind in our installations. My opinion was that, if the customer is uninstalling our application, there should be no trace of it left after uninstall except for the customer’s data. He replied with, “screw ‘em. They’re leaving us. Why do we care if we left anything behind?” Wow. Surely there is a lot of arrogance in that statement. Think about this…how often do you change your services, devices, or whatever?  Personally, I change things up about once every two or three years. If I don’t change things up, I at least think about it. So, every two or three years there is an opportunity for you (as a vendor or business) to sell me something. (That opportunity actually exists all the time, because there are many of these two or three year periods overlapping.) Likewise, you have the opportunity to win back my business every two or three years as well. Customer service on exit is just as important as customer service during engagement because, every so often, you have another chance to gain back my loyalty. If you screw that up on exit, your chances are close to zero. In addition, you need to consider all of the potential or existing customers that are part of or affected by my social organizations. “Melissa” at TiVo gave me a call last week and set up some time to talk about my experience. We talked yesterday and she gave me a few moments to pontificate about my thoughts on the importance of a complete customer experience. She had listened to my customer support calls and agreed that I had made it clear that I intended to remain a TiVo customer even though suddenLink is handling my subscription. She said that suddenLink is a very important partner for them and, of course, they want to do everything they can to support TiVo / suddenLink customers.  “Melissa” also said that they had turned this experience into a training opportunity for the reps involved. I hope that is true, because that “programmer arrogance” that I mentioned above (which was somewhat pervasive back then) may be part of the reason why that company is no longer around. Good job “Melissa”!  And, like I said, I am still a TiVo fan. In fact, we love our new TiVo and many of the great new features. In addition, if you’re one of the two people that read these posts, please remember that these are just opinions. Your experiences may be, and likely will be, completely unique to you.

  Read the article

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >