Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 653/750 | < Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >

• Steps to Investigate Cause of Web.Config Duplicate Section

  - by pauly

  Symptoms In IIS Dot Net 2.0 Integrated app pool: double clicking to view any web.config section results in a the following error dialog. "There was an error while performing this operation.... Fielname... web.config... Error: There is a duplicate..." Browsing to the URL displays: "Http 500.19" internal server error.. There is a duplicate... 'system.web.extensions/scripting/scriptResourceHandler' section defined...." Running the app from VS 2008 an "Unable to start debugging on the web server..." dialog is displayed. Things Tried Looked at other application directories on same IIS server. No problem view web.config contents or serving up the app. Removed and re-added the application in IIS. Checked out a new version of the source code. Reverted to prior versions of the web.config file. Looked for web.config files that might have duplicate sections in: Inetpub root. "C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config" The "Views" subfolder of the ASP.Net MVC app. Checked out source code to another dev machine. Setup IIS 7 app folder. No problem with Web.config. Question If the reason for this error is another web.config file where else should I look? Are there other reasons for these symptoms?

  Read the article

• Visual Studio 2008 freeze after save

  - by Klay

  I recently added about a dozen classes from another solution into my current solution in Visual Studio. After adding these classes, Visual Studio started freezing for about 10 seconds whenever I Save. The cursor disappears and mouse clicks and keys do nothing. Some interesting points: Even after I removed the classes, the freezing behavior is still there. Freezing occurs whether I've made changes to the code or not. This behavior ONLY seems to affect this particular version of this solution. No other solutions exhibit this behavior. Older versions of this solution are not affected. In Sysinternals Process Explorer, whenever I save in Visual Studio, the I/O bytes graph jumps from 0 to 2MB for about 5 seconds, then drops to about 1 MB for a split second, then jumps back to 2MB for another 5 seconds. Processor use goes up to about 3-5% during this time. Here are the details of my setup: C# Silverlight project (maybe 20 classes), .NET version 3.5 SP1, Visual Studio 2008 v9.0.30729 SP1. EDIT: I edited this question extensively to reflect the more detailed information. I thought this might be preferable to starting a new question.

  Read the article

• Preferred way of application initialization

  - by lisak

  Do you guys have your own little framework for project startups ? I mean, every time one needs to do the same things at the beginning: Context initialization - ideally after arguments are processed. Sometimes without interactive user input, sometimes with input reader. Sometimes we need to load properties, sometimes not. Then we need to get a class out of context and run its method. Programming....programming until writing shell script to place everything on classpath. It's true that it differs according to the actual needs. But it seems to me, that I'm doing always almost the same, again and again from the scratch. Sometimes I realize that I'm postponing my work just because I don't want to do these annoying startups. It would be great if there was some kind of universal Main class doing reflection to specified bean, context initialization, argument parsing, interactive user input reading and have the programmer do the important things...All setup might be done via spring configuration. I think I'll have to do it by myself. I'd appreciate your ideas

  Read the article

• How do ASP.NET MVC Routes work?

  - by Pure.Krome

  Hi folks, imagine i have the following route setup... public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", "{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" } ); // Added custom route here! routes.MapRoute( "CatchAll", "{*catchall}," new { controller = "Error", action = "NotFound" } ); } nothing new - that's the default ASP.NET MVC1 RegisterRoutes method, with one custom route added. Now, if I goto the following url, i get a 404... http://whatever/Home/MissingActionMethod So there's no ActionMethod called MissingActionMethod in the HomeController. So, does this mean, if i goto the 1st route defined, above .. and fail to find an action .. do I then come back and try the second route? rinse-repeat? Or once i match a route, i then try and execute that route .. and if i fail (ie, find the action is missing) .. then .. bad luck? boomski? cheers!

  Read the article

• How do I bind an iTunes style source list to an NSTableView using Core Data?

  - by Austin

  I have an iTunes style interface in my application: Source list (NSOutlineView) on the left that contains different libraries and playlists with an NSTableView on the right side of the interface displaying information for "Presentations". Similar to iTunes, I am showing the same type of information in the table view whether a library or playlist is selected (title, author, date created, etc). I currently have an NSArrayController connected to my NSTableView and was setting the fetch predicate based on what was selected in the source list. This works fine when selecting a library because I can just set the fetch predicate to filter by the "type" field in my Presentation Core Data entity. When I try to adjust the fetch predicate for the playlist however, it doesn't look like there is any way to set the fetch predicate because I've got a table in between Playlists and Presentations to keep up with the order within the Playlist. According to the Apple docs, these type of predicates are not doable with Core Data (it basically doesn't multiple inner joins). Below is the relevant portion of my Data Model. Is my data model setup incorrectly? Should I drop the NSArrayController and handle connecting the NSTableView up by hand? I'm trying to figure out if there is a simple fix, or really a design flaw.

  Read the article

• Dragging a copy of all selected elements from a select box--possible?

  - by Sean

  I have a picklist web interface: a pair of select elements with a pair of buttons (a left-pointing arrow and a right-pointing arrow) between them. Users can move items between the two columns by, eg, selecting one of options in the left column and clicking on the right-pointing arrow. Now I have an enhancement request: someone wants to be able to drag-and-drop items between the two columns instead of clicking a button. The problem with my initial two-select-box setup is that as soon as I click one of the highlighted options to initiate a drag, all of the other selected options are deselected. Using jQuery, I've attached mousedown event handlers to both the select boxes and each individual option that just call preventDefault() on the event object, but this isn't sufficient. On Firefox 3 the clicked-on option loses focus immediately, but all other options are still deseleted, and on IE6 (which I regrettably still have to support) it makes no difference at all. So I thought I could maybe create a reasonable facsimile of a select box using list elements or divs or something. I can create something reasonable-looking that works on Firefox, but on IE6, if I shift-click on an element of my pseudo-select object (in order to select a range of options), IE selects all of the text between where I click and the last place I clicked. Again, I've attached preventDefault-ing mousedown, mouseup, and click handlers to all of the elements involved, but it doesn't help. I've even tried overlaying transparent divs over both my original select boxes and my pseudo-select objects, thinking to intercept mouse clicks and manage the selections manually, but I can't make it work on IE. If I use a select box, I can't prevent clicks from changing the selection, and if I use text that just looks like a select element, I can't prevent it from selecting a range of text on a shift-click. Is there some general solution, or am I just out of luck?

  Read the article

• Squid handling of concurrent cache misses

  - by Oliver H-H

  We're using a Squid cache to off-load traffic from our web servers, ie. it's setup as a reverse-proxy responding to inbound requests before they hit our web servers. When we get blitzed with concurrent requests for the same request that's not in the cache, Squid proxies all the requests through to our web ("origin") servers. For us, this behavior isn't ideal: our origin servers gets bogged down trying to fulfill N identical requests concurrently. Instead, we'd like the first request to proxy through to the origin server, the rest of the requests to queue at the Squid layer, and then all be fulfilled by Squid when the origin server has responded to that first request. Does anyone know how to configure Squid to do this? We've read through the documentation multiple times and thoroughly web-searched the topic, but can't figure out how to do it. We use Akamai too and, interestingly, this is its default behavior. (However, Akamai has so many nodes that we still see lots of concurrent requests in certain traffic spike scenarios, even with Akamai's super-node feature enabled.) This behavior is clearly configurable for some other caches, eg. the Ehcache documentation offers the option "Concurrent Cache Misses: A cache miss will cause the filter chain, upstream of the caching filter to be processed. To avoid threads requesting the same key to do useless duplicate work, these threads block behind the first thread." Some folks call this behavior a "blocking cache," since the subsequent concurrent requests block behind the first request until it's fulfilled or timed-out. Thx for looking over my noob question! Oliver

  Read the article

• Android - Persist file when app closes.

  - by Donal Rafferty

  I am creating a file in my Android application as follows: HEADINGSTRING = new String("Android Debugging " + "\n" "XML test Debugging"); } public void setUpLogging(Context context){ Log.d("LOGGING", "Setting up logging....."); try { // catches IOException below FileOutputStream fOut = context.openFileOutput(FILE_NAME,Context.MODE_APPEND); OutputStreamWriter osw = new OutputStreamWriter(fOut); // Write the string to the file osw.write(HEADINGSTRING); /* ensure that everything is * really written out and close */ osw.flush(); osw.close(); } catch (FileNotFoundException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } finally{ Log.d("LOGGING", "Finished logging setup....."); } } And I write to the file during the running of the app as follows: public void addToLog(File file, String text) throws IOException { BufferedWriter bw = new BufferedWriter (new FileWriter(file, true)); bw.write ("\n" + text); bw.newLine(); bw.flush(); bw.close(); } This works fine but when my app closes the file gets deleted and when the app is run again all the information I wrote to it is gone. How can I make sure the file persists even after closure of the app? Update: I have changed MODE_PRIVATE to MODE_APPEND but the problem still remains.

  Read the article

• I'm trying to install psycopg2 onto Mac OS 10.6.3; it claims it can't find "stdarg.h" but I can see

  - by cojadate

  I'm desperately trying to successfully install psycopg2 but keep running into errors. The latest one seems to involve it not being to find "stdarg.h" (see code below). However I can see with my own eyes that a file called stdarg.h exists at /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h (where it claims it can't find anything) so I've no idea what to do about it. I'm running Mac OS 10.6.3 and within the last few days I've made sure I have all the latest OS developer tools. I have Python 2.6.2 and PostgreSQL 8.4 if that makes any difference. python setup.py install running install running build running build_py running build_ext building 'psycopg2._psycopg' extension creating build/temp.macosx-10.3-fat-2.6 creating build/temp.macosx-10.3-fat-2.6/psycopg gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -O3 -DPSYCOPG_DEFAULT_PYDATETIME=1 -DPSYCOPG_VERSION="2.2.1 (dt dec ext pq3)" -DPG_VERSION_HEX=0x080404 -DPSYCOPG_EXTENSIONS=1 -DPSYCOPG_NEW_BOOLEAN=1 -DHAVE_PQFREEMEM=1 -DHAVE_PQPROTOCOL3=1 -I/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -I. -I/opt/local/include/postgresql84 -I/opt/local/include/postgresql84/server -c psycopg/psycopgmodule.c -o build/temp.macosx-10.3-fat-2.6/psycopg/psycopgmodule.o In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory lipo: can't figure out the architecture type of: /var/folders/MQ/MQ-tWOWWG+izzuZCrAJpzk+++TI/-Tmp-//ccakFhRS.out error: command 'gcc' failed with exit status

  Read the article

• How to organize integrity tests and code unit tests?

  - by karlthorwald

  I have several files with code testing code (which uses a "unittest" class). Later I found it would be nice to test database integrity also. I put this into a separate directory tree. (Things like the keys have correct format, parent and child nodes are pointing correctly and such.) I use the same unittest class for the integrity tests. Now I wonder if it makes really sense to keep this separate. To test the integrity of data I often duplicate parts of code that I use to test the code that handles the data. But it is not the same. The code tests use test databases (that get deleted after each test) and the integrity tests connect to the live data and analyze it. The integrity tests I want to call from cron and send an alarm if something happens in the live database. How would you handle that? Are there standards for such a setup? What is your experience? My tendency is to put everything in the same file, which would result in the code tests also being executed by the cron on the production environment.

  Read the article

• Table HTML problem..

  - by Azzyh

  hello i am trying to setup tables so the result outcomes like this: code: <table width="60%" cellpadding="0" cellspacing="1" id="theBoxer"> <tr style="background: #686868 ;"> <td align="center" valign="top" width="240" height="25" style="border:1px #FFF solid;">About me</td> </tr> <tr> <td align="left" valign="top" width="250" height="112" style=""> Points:<br> Lalala: <br> Lalala: <br> </td> <td align="left" valign="top" width="250" height="112" style=""> Lalala: <br> Lalala: </tr> </table> cant get it to work like how i wanted. the problem i get with my code is that "About me" only covers for the first td and not the other

  Read the article

• How to restrain one's self from the overwhelming urge to rewrite everything?

  - by Scott Saad

  Setup Have you ever had the experience of going into a piece of code to make a seemingly simple change and then realizing that you've just stepped into a wasteland that deserves some serious attention? This usually gets followed up with an official FREAK OUT moment, where the overwhelming feeling of rewriting everything in sight starts to creep up. It's important to note that this bad code does not necessarily come from others as it may indeed be something we've written or contributed to in the past. Problem It's obvious that there is some serious code rot, horrible architecture, etc. that needs to be dealt with. The real problem, as it relates to this question, is that it's not the right time to rewrite the code. There could be many reasons for this: Currently in the middle of a release cycle, therefore any changes should be minimal. It's 2:00 AM in the morning, and the brain is starting to shut down. It could have seemingly adverse affects on the schedule. The rabbit hole could go much deeper than our eyes are able to see at this time. etc... Question So how should we balance the duty of continuously improving the code, while also being a responsible developer? How do we refrain from contributing to the broken window theory, while also being aware of actions and the potential recklessness they may cause? Update Great answers! For the most part, there seems to be two schools of thought: Don't resist the urge as it's a good one to have. Don't give in to the temptation as it will burn you to the ground. It would be interesting to know if more people feel any balance exists.

  Read the article

• Help with error creating SharePoint list (probably due to privilege issues)

  - by Swami

  I'm getting an error when trying to activate a webpart. It activates fine in one setup , but fails in a different one. Administrator in both. Seems like it fails because it's not able to create the list. The error is: Message: Value cannot be null. Stack Trace: at Microsoft.Sharepoint.SPRoleAssignment..ctor at ClientRequestHandler.CreateList(... private static void CreateLists() { try { SPSecurity.RunWithElevatedPrivileges(delegate() { using (SPSite site = SPContext.Current.Site) { using (SPWeb web = site.RootWeb) { string listName = LIST_NAME; bool listExist = ContainList(web, listName); if (!listExist) { AddFieldDelegate _delegate = new AddFieldDelegate(AddAttachmentFields); SPList list = CreateList(web, listName, _delegate); RegisterList(web, list, KEY); } } } }); } catch (Exception ex) { throw new Exception(String.Format("Message: {0} Stack Trace: {1}", ex.Message, ex.StackTrace.ToString())); } } private static SPList CreateList(SPWeb web, string listName, AddFieldDelegate _delegate) { web.AllowUnsafeUpdates = true; SPListTemplateType genericList = new SPListTemplateType(); genericList = SPListTemplateType.GenericList; Guid listGuid = web.Lists.Add(listName, "List", genericList); SPList list = web.Lists[listGuid]; list.Hidden = true; SPView view = _delegate(list); view.Update(); //Remove permissions from the list list.BreakRoleInheritance(false); //Make site owners the list administrators SPPrincipal principal = web.AssociatedOwnerGroup as SPPrincipal; SPRoleAssignment assignment = new SPRoleAssignment(principal); assignment.RoleDefinitionBindings.Add(web.RoleDefinitions.GetByType(SPRoleType.Administrator)); list.RoleAssignments.Add(assignment); //update list changes list.Update(); return list; }

  Read the article

• eclipse django using wrong settings.py in pythonpath

  - by user1290264

  I have pydev/django installed in eclipse, and it runs fine. However, after adding a second django project to eclipse and running the server ('http://127.0.0.1:8000') the pythonpath seems to be stuck on project2 even when I run project1. As a summary, I have two django projects: project1, project2. When I run the django server for project1 I get: Validating models... 0 errors found Django version 1.5, using settings 'project1.settings' Development server is running at 'http://127.0.0.1:8000/' Quit the server with CTRL-BREAK. The above seems to suggest that django is using the correct settings file; however, when I go to 'http://127.0.0.1:8000/' it displays the urls from project2. Also, if I go to 'http://127.0.0.1:8000/admin' the models are getting pulled from the sqlite.db file in project2 as well. I've even tried removing project2 from eclipse entirely and now at 'http://127.0.0.1:8000/admin' I get this error: Python Path: ['C:\Users\Brad\workspaces\In Progress\project2', 'C:\Users\Brad\workspaces\In Progress\project2', 'C:\Python27\DLLs', 'C:\Python27\lib', 'C:\Python27\lib\plat-win', 'C:\Python27\lib\lib-tk', 'C:\Python27', 'C:\Python27\lib\site-packages', 'C:\Windows\system32\python27.zip'] If I run the server on a different port with project1 the path seems to be fine: runserver 7000 --noreload Then 'http://127.0.0.1:7000/' uses project1's paths, but it doesn't seem like I should have to do this. Note: I have setup the run configurations as correctly as I know how. In the main tab, the project and main module both point to the correct project (project1), and the "PYTHONPATH that will be used in the run:" includes project1. Also, I have cleared my browser history, cookies, and everything that chrome would let me delete.

  Read the article

• How to organize live data integrity tests and code unit tests?

  - by karlthorwald

  I have several files with code testing code (which uses a "unittest" class). Later I found it would be nice to test database integrity also. I put this into a separate directory tree. (Things like the keys have correct format, parent and child nodes are pointing correctly and such.) I use the same unittest class for the integrity tests. Now I wonder if it makes really sense to keep this separate. To test the integrity of data I often duplicate parts of code that I use to test the code that handles the data. But it is not the same. The code tests use test databases (that get deleted after each test) and the integrity tests connect to the live data and analyze it. The integrity tests I want to call from cron and send an alarm if something happens in the live database. How would you handle that? Are there standards for such a setup? What is your experience? My tendency is to put everything in the same file, which would result in the code tests also being executed by the cron on the production environment.

  Read the article

• Code Access Security and Sharepoint WebParts

  - by Gordon Carpenter-Thompson

  I've got a vague handle on how Code Access Security works in Sharepoint. I have developed a custom webpart and setup a CAS policy in my Manifest <CodeAccessSecurity> <PolicyItem> <PermissionSet class="NamedPermissionSet" version="1" Description="Permission set for Okana"> <IPermission class="Microsoft.SharePoint.Security.SharePointPermission, Microsoft.SharePoint.Security, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1" ObjectModel="True" Impersonate="True" /> <IPermission class="SecurityPermission" version="1" Flags="Assertion, Execution, ControlThread, ControlPrincipal, RemotingConfiguration" /> <IPermission class="AspNetHostingPermission" version="1" Level="Medium" /> <IPermission class="DnsPermission" version="1" Unrestricted="true" /> <IPermission class="EventLogPermission" version="1" Unrestricted="true"> <Machine name="localhost" access="Administer" /> </IPermission> <IPermission class="EnvironmentPermission" version="1" Unrestricted="true" /> <IPermission class="System.Configuration.ConfigurationPermission, System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" version="1" Unrestricted="true"/> <IPermission class="System.Net.WebPermission, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" Unrestricted="true" /> <IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" PathDiscovery="*AllFiles*" /> <IPermission class="IsolatedStorageFilePermission" version="1" Allowed="AssemblyIsolationByUser" UserQuota="9223372036854775807" /> <IPermission class="PrintingPermission" version="1" Level="DefaultPrinting" /> <IPermission class="PerformanceCounterPermission" version="1"> <Machine name="localhost"> <Category name="Enterprise Library Caching Counters" access="Write"/> <Category name="Enterprise Library Cryptography Counters" access="Write"/> <Category name="Enterprise Library Data Counters" access="Write"/> <Category name="Enterprise Library Exception Handling Counters" access="Write"/> <Category name="Enterprise Library Logging Counters" access="Write"/> <Category name="Enterprise Library Security Counters" access="Write"/> </Machine> </IPermission> <IPermission class="ReflectionPermission" version="1" Unrestricted="true"/> <IPermission class="SecurityPermission" version="1" Flags="SerializationFormatter, UnmanagedCode, Infrastructure, Assertion, Execution, ControlThread, ControlPrincipal, RemotingConfiguration, ControlAppDomain,ControlDomainPolicy" /> <IPermission class="SharePointPermission" version="1" ObjectModel="True" /> <IPermission class="SmtpPermission" version="1" Access="Connect" /> <IPermission class="SqlClientPermission" version="1" Unrestricted="true"/> <IPermission class="WebPartPermission" version="1" Connections="True" /> <IPermission class="WebPermission" version="1"> <ConnectAccess> <URI uri="$OriginHost$"/> </ConnectAccess> </IPermission> </PermissionSet> <Assemblies> .... </Assemblies> This is correctly converted into a wss_custom_wss_minimaltrust.config when it is deployed onto the Sharepoint server and mostly works. To get the WebPart working fully, however I find that I need to modify the wss_custom_wss_minimaltrust.config by hand after deployment and set Unrestricted="true" on the permissions set <PermissionSet class="NamedPermissionSet" version="1" Description="Permission set for MyApp" Name="mywebparts.wsp-86d8cae1-7db2-4057-8c17-dc551adb17a2-1"> to <PermissionSet class="NamedPermissionSet" version="1" Description="Permission set for MyApp" Name="mywebparts.wsp-86d8cae1-7db2-4057-8c17-dc551adb17a2-1" Unrestricted="true"> It's all because I'm loading a User Control from the webpart. I don't believe there is a way to enable that using CAS but am willing to be proven wrong. Is there a way to set something in the manifest so I don't need to make this fix by hand? Thanks

  Read the article

• Best practices for managing updating a database with a complex set of changes

  - by Sarge

  I am writing an application where I have some publicly available information in a database which I want the users to be able to edit. The information is not textual like a wiki but is similar in concept because the edits bring the public information increasingly closer to the truth. The changes will affect multiple tables and the update needs to be automatically checked before affecting the public tables. I'm working on the design and I'm wondering if there are any best practices that might help with some particular issues. I want to provide undo capability. I want to show the user the combined result of all their changes. When the user says they're done, I need to check the underlying public data to make sure it hasn't been changed by somebody else. My current plan is to have the user work in a set of tables setup to be a private working area. Once they're ready they can kick off a process to check everything and update the public tables. Undo can be recorded using Command pattern saving to a table. Are there any techniques I might have missed or useful papers or patterns? Thanks in advance!

  Read the article

• SQL Server Reset Identity Increment for all tables

  - by DanSpd

  Basically I need to reset Identity Increment for all tables to its original. Here I tried some code, but it fails. http://pastebin.com/KSyvtK5b actual code from link: USE World00_Character GO -- Create a cursor to loop through the System Ojects and get each table name DECLARE TBL_CURSOR CURSOR -- Declare the SQL Statement to cursor through FOR ( SELECT Name FROM Sysobjects WHERE Type='U' ) -- Declare the @SQL Variable which will hold our dynamic sql DECLARE @SQL NVARCHAR(MAX); SET @SQL = ''; -- Declare the @TblName Variable which will hold the name of the current table DECLARE @TblName NVARCHAR(MAX); -- Open the Cursor OPEN TBL_CURSOR -- Setup the Fetch While that will loop through our cursor and set @TblName FETCH NEXT FROM TBL_CURSOR INTO @TblName -- Do this while we are not at the end of the record set WHILE (@@FETCH_STATUS <> -1) BEGIN -- Appeand this table's select count statement to our sql variable SET @SQL = @SQL + ' ( SELECT '''+@TblName+''' AS Table_Name,COUNT(*) AS Count FROM '+@TblName+' ) UNION'; -- Delete info EXEC('DBCC CHECKIDENT ('+@TblName+',RESEED,(SELECT IDENT_SEED('+@TblName+')))'); -- Pull the next record FETCH NEXT FROM TBL_CURSOR INTO @TblName -- End the Cursor Loop END -- Close and Clean Up the Cursor CLOSE TBL_CURSOR DEALLOCATE TBL_CURSOR -- Since we were adding the UNION at the end of each part, the last query will have -- an extra UNION. Lets trim it off. SET @SQL = LEFT(@SQL,LEN(@SQL)-6); -- Lets do an Order By. You can pick between Count and Table Name by picking which -- line to execute below. SET @SQL = @SQL + ' ORDER BY Count'; --SET @SQL = @SQL + ' ORDER BY Table_Name'; -- Now that our Dynamic SQL statement is ready, lets execute it. EXEC (@SQL); GO error message: Error: Msg 102, Level 15, State 1, Line 1 Incorrect syntax near '('. How can I either fix that SQL or reset identity for all tables to its original? Thank you

  Read the article

• Intel Assembly Programming

  - by Kay

  class MyString{ char buf[100]; int len; boolean append(MyString str){ int k; if(this.len + str.len>100){ for(k=0; k<str.len; k++){ this.buf[this.len] = str.buf[k]; this.len ++; } return false; } return true; } } Does the above translate to: start: push ebp ; save calling ebp mov ebp, esp ; setup new ebp push esi ; push ebx ; mov esi, [ebp + 8] ; esi = 'this' mov ebx, [ebp + 14] ; ebx = str mov ecx, 0 ; k=0 mov edx, [esi + 200] ; edx = this.len append: cmp edx + [ebx + 200], 100 jle ret_true ; if (this.len + str.len)<= 100 then ret_true cmp ecx, edx jge ret_false ; if k >= str.len then ret_false mov [esi + edx], [ebx + 2*ecx] ; this.buf[this.len] = str.buf[k] inc edx ; this.len++ aux: inc ecx ; k++ jmp append ret_true: pop ebx ; restore ebx pop esi ; restore esi pop ebp ; restore ebp ret true ret_false: pop ebx ; restore ebx pop esi ; restore esi pop ebp ; restore ebp ret false My greatest difficulty here is figuring out what to push onto the stack and the math for pointers. NOTE: I'm not allowed to use global variables and i must assume 32-bit ints, 16-bit chars and 8-bit booleans.

  Read the article

• What is the best way to auto-generate INSERT statements for a SQL Server table?

  - by JosephStyons

  We are writing a new application, and while testing, we will need a bunch of dummy data. I've added that data by using MS Access to dump excel files into the relevant tables. Every so often, we want to "refresh" the relevant tables, which means dropping them all, re-creating them, and running a saved MS Access append query. The first part (dropping & re-creating) is an easy sql script, but the last part makes me cringe. I want a single setup script that has a bunch of INSERTs to regenerate the dummy data. I have the data in the tables now. What is the best way to automatically generate a big list of INSERT statements from that dataset? I'm thinking of something like in TOAD (for Oracle) where you can right-click on a grid and click Save As-Insert Statements, and it will just dump a big sql script wherever you want. The only way I can think of doing it is to save the table to an excel sheet and then write an excel formula to create an INSERT for every row, which is surely not the best way. I'm using the 2008 Management Studio to connect to a SQL Server 2005 database.

  Read the article

• SSH traffic over openvpn freezes under weird circumstances

  - by user289581

  I have an openvpn (version 2.1_rc15 at both ends) connection setup between two gentoo boxes using shared keys. it works fine for the most part. I use mysql, http, ftp, scp over the vpn with no problems. But when I ssh from the client to the server over the vpn, weird things happen. I can login, i can execute some commands. But if i try to run an ncurses application like top, or i try to cat a file, the connection will stall and I'll have to sever the ssh session. I can, for example, execute "echo blah; echo .; echo blah" and it will output the three lines of text over the ssh session fine. But if i execute "cat /etc/motd" the session will freeze the moment I press enter. While it seems like a terminal emulation problem it makes no sense why using the vpn would affect the ability for ssh to render things correctly. I am at a loss to explain why everything else works, including scp, but ssh just breaks over the vpn. Any thoughts ?

  Read the article

• NHibernate Child items query using Parent Id

  - by thorkia

  So I have a set up similar to this questions: Parent Child Setup Everything works great when saving the parent and the children. However, I seem to have a problem when selecting the children. I can't seem to get all the children with a specific parent. This fails with: NHibernate.QueryException: could not resolve property: ParentEntity_id of: Test.Data.ChildEntity Here is my code: public IEnumerable<ChildEntity> GetByParent(ParentEntity parent) { using (ISession session = OrmHelper.OpenSession()) { return session.CreateCriteria<ChildEntity>().Add(Restrictions.Eq("ParentEntity_id ", parent.Id)).List<ChildEntity>(); } } Any help in building a proper function to get all the items would be appreciated. Oh, I am using Fluent NHibernate to construct the mappings - version 1 RTM and NHibernate 2.1.2 GA If you need more information, let me know. As per you request, my fluent mappings: public ParentEntityMap() { Id(x => x.Id); Map(x => x.Name); Map(x => x.Code).UniqueKey("ukCode"); HasMany(x => x.ChildEntity).LazyLoad() .Inverse().Cascade.SaveUpdate(); } public ChildEntityMap() { Id(x => x.Id); Map(x => x.Amount); Map(x => x.LogTime); References(x => x.ParentEntity); } That maps to the following 2 tables: CREATE TABLE "ParentEntity" ( Id integer, Name TEXT, Code TEXT, primary key (Id), unique (Code) ) CREATE TABLE "ChildEntity" ( Id integer, Amount NUMERIC, LogTime DATETIME, ParentEntity_id INTEGER, primary key (Id) ) The data store in SQLite.

  Read the article

• IIS6 compressing static files, but not JSON requests

  - by user500038

  I have IIS6 compression setup, and static content is being compressed correctly as per Coding Horror. Example of a static file: Response Headers Content-Length 55513 Content-Type application/x-javascript Content-Encoding gzip Last-Modified Mon, 20 Dec 2010 15:31:58 GMT Accept-Ranges bytes Vary Accept-Encoding Server Microsoft-IIS/6.0 X-Powered-By ASP.NET Date Wed, 29 Dec 2010 16:37:23 GMT Request Headers Accept */* Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive As you can see, the response is correctly compressed. However with a JSON call you'll see the request with the gzip parameter correctly set: Accept application/json, text/javascript, */*; q=0.01 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive X-Requested-With XMLHttpRequest Then for the response: Cache-Control private Content-Length 6811 Content-Type application/json; charset=utf-8 Server Microsoft-IIS/6.0 X-Powered-By ASP.NET X-AspNet-Version 2.0.50727 X-AspNetMvc-Version 2.0 No gzip! I found this article by Rick Stahl, which outlines how to compress in your code, but I'd like IIS to handle this. Is this possible with IIS6?

  Read the article

• Proper use of HttpRequestInterceptor and CredentialsProvider in doing preemptive authentication with

  - by Preston

  I'm writing an application in Android that consumes some REST services I've created. These web services aren't issuing a standard Apache Basic challenge / response. Instead in the server-side code I'm wanting to interrogate the username and password from the HTTP(S) request and compare it against a database user to make sure they can run that service. I'm using HttpClient to do this and I have the credentials stored on the client after the initial login (at least that's how I see this working). So here is where I'm stuck. Preemptive authenticate under HttpClient requires you to setup an interceptor as a static member. This is the example Apache Components uses. HttpRequestInterceptor preemptiveAuth = new HttpRequestInterceptor() { @Override public void process( final HttpRequest request, final HttpContext context) throws HttpException, IOException { AuthState authState = (AuthState) context.getAttribute(ClientContext.TARGET_AUTH_STATE); CredentialsProvider credsProvider = (CredentialsProvider) context.getAttribute( ClientContext.CREDS_PROVIDER); HttpHost targetHost = (HttpHost) context.getAttribute(ExecutionContext.HTTP_TARGET_HOST); if (authState.getAuthScheme() == null) { AuthScope authScope = new AuthScope(targetHost.getHostName(), targetHost.getPort()); Credentials creds = credsProvider.getCredentials(authScope); if (creds != null) { authState.setAuthScheme(new BasicScheme()); authState.setCredentials(creds); } } } }; So the question would be this. What would the proper use of this be? Would I spin this up as part of the application when the application starts? Pulling the username and password out of memory and then using them to create this CredentialsProvider which is then utilized by the HttpRequestInterceptor? Or is there a way to do this more dynamically?

  Read the article

• Javascript Mouseover bubbling from children

  - by Nicky De Maeyer

  Ive got the following html setup: <div id="div1"> <div id="content1">blaat</div> <div id="content1">blaat2</div> </div> it is styled so you can NOT hover div1 without hovering one of the other 2 divs. Now i've got a mouseout on div1. The problem is that my div1.mouseout gets triggered when i move from content1 to content2, because their mouseouts are bubbling. and the event's target, currentTarget or relatedTarget properties are never div1, since it is never hovered directly... I've been searching mad for this, but I can only find articles and solutions for problems who are the reverse of what I need. It seems trivial but I can't get it to work... The mouseout of div1 should ONLY get triggered when the mouse leaves div1. One of the possibilities would be to set some data on mouse enter and mouseleave, but I'm convinced this should work out of the box, since it is just a mouseout... EDIT: bar.mouseleave(function(e) { if ($(e.currentTarget).attr('id') == bar.attr('id')) { bar.css('top', '-'+contentOuterHeight+'px'); $('#floatable-bar #floatable-bar-tabs span').removeClass('active'); } }); changed the mouseout to mouseleave and the code worked...

  Read the article

< Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >