Search Results

Search found 24177 results on 968 pages for 'true'.

Page 653/968 | < Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >

  • x axis detection issues platformer starter kit

    - by dbomb101
    I've come across a problem with the collision detection code in the platformer starter kit for xna.It will send up the impassible flag on the x axis despite being nowhere near a wall in either direction on the x axis, could someone could tell me why this happens ? Here is the collision method. /// <summary> /// Detects and resolves all collisions between the player and his neighboring /// tiles. When a collision is detected, the player is pushed away along one /// axis to prevent overlapping. There is some special logic for the Y axis to /// handle platforms which behave differently depending on direction of movement. /// </summary> private void HandleCollisions() { // Get the player's bounding rectangle and find neighboring tiles. Rectangle bounds = BoundingRectangle; int leftTile = (int)Math.Floor((float)bounds.Left / Tile.Width); int rightTile = (int)Math.Ceiling(((float)bounds.Right / Tile.Width)) - 1; int topTile = (int)Math.Floor((float)bounds.Top / Tile.Height); int bottomTile = (int)Math.Ceiling(((float)bounds.Bottom / Tile.Height)) - 1; // Reset flag to search for ground collision. isOnGround = false; // For each potentially colliding tile, for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { // If this tile is collidable, TileCollision collision = Level.GetCollision(x, y); if (collision != TileCollision.Passable) { // Determine collision depth (with direction) and magnitude. Rectangle tileBounds = Level.GetBounds(x, y); Vector2 depth = RectangleExtensions.GetIntersectionDepth(bounds, tileBounds); if (depth != Vector2.Zero) { float absDepthX = Math.Abs(depth.X); float absDepthY = Math.Abs(depth.Y); // Resolve the collision along the shallow axis. if (absDepthY < absDepthX || collision == TileCollision.Platform) { // If we crossed the top of a tile, we are on the ground. if (previousBottom <= tileBounds.Top) isOnGround = true; // Ignore platforms, unless we are on the ground. if (collision == TileCollision.Impassable || IsOnGround) { // Resolve the collision along the Y axis. Position = new Vector2(Position.X, Position.Y + depth.Y); // Perform further collisions with the new bounds. bounds = BoundingRectangle; } } //This is the section which deals with collision on the x-axis else if (collision == TileCollision.Impassable) // Ignore platforms. { // Resolve the collision along the X axis. Position = new Vector2(Position.X + depth.X, Position.Y); // Perform further collisions with the new bounds. bounds = BoundingRectangle; } } } } } // Save the new bounds bottom. previousBottom = bounds.Bottom; }

    Read the article

  • Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

    - by jjapol
    I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

    Read the article

  • gstreamer pulseaudio echo cancellation

    - by user3618055
    I'm implementing a voip application using gstreamer, i use the example of the rtp in the plugin-good! i want to implement echo cancellation, i couldn't use the speex echo canceller with gstreamer because the input and the output are not in the same process. So, i want to use pulse audio to make echo cancellation? can any one help me how to deal with? the sender voice is pipeline = gst_pipeline_new (NULL); g_assert (pipeline); /* the audio capture and format conversion */ audiosrc = gst_element_factory_make (pulsesrc, "audiosrc"); g_assert (audiosrc); audioconv = gst_element_factory_make ("audioconvert", "audioconv"); g_assert (audioconv); audiores = gst_element_factory_make ("audioresample", "audiores"); g_assert (audiores); /* the encoding and payloading */ audioenc = gst_element_factory_make (AUDIO_ENC, "audioenc"); g_assert (audioenc); audiopay = gst_element_factory_make (AUDIO_PAY, "audiopay"); g_assert (audiopay); /* add capture and payloading to the pipeline and link */ gst_bin_add_many (GST_BIN (pipeline), audiosrc, audioconv, audiores, audioenc, audiopay, NULL); if (!gst_element_link_many (audiosrc, audioconv, audiores, audioenc, audiopay, NULL)) { g_error ("Failed to link audiosrc, audioconv, audioresample, " "audio encoder and audio payloader"); } and the receiver is : gst_bin_add_many (GST_BIN (pipeline), rtpsrc, rtcpsrc, rtcpsink, NULL); /* the depayloading and decoding */ audiodepay = gst_element_factory_make (AUDIO_DEPAY, "audiodepay"); g_assert (audiodepay); audiodec = gst_element_factory_make (AUDIO_DEC, "audiodec"); g_assert (audiodec); /* the audio playback and format conversion */ audioconv = gst_element_factory_make ("audioconvert", "audioconv"); g_assert (audioconv); audiores = gst_element_factory_make ("audioresample", "audiores"); g_assert (audiores); audiosink = gst_element_factory_make (pulsesink, "audiosink"); g_assert (audiosink); /* add depayloading and playback to the pipeline and link */ gst_bin_add_many (GST_BIN (pipeline), audiodepay, audiodec, audioconv, audiores, audiosink, NULL); res = gst_element_link_many (audiodepay, audiodec, audioconv, audiores, audiosink, NULL); g_assert (res == TRUE); i tried to change gstreamer proprietes to pulseaudio server in input and output and i used "pactl load-module module-echo-cancel aec_method=adrian" but i still listen to echo!! any one could help please thanks!!

    Read the article

  • Android Touch Event Collision Detection

    - by chrissb
    I'm relatively new to both Java and Android, so hopefully the problem I'm having is stemming from something pretty minor that I've overlooked. I've got a (very early stage) game that I've started working on, for Android using Java. At this stage, when the user touches the screen, if they touched a point at which there is an enemy, the enemies health is decreased and they become immobile (for the current implementation at least). The issue that I'm having is that the touch detection doesn't always seem to work. I've got a testing sprite set up that goes to the eventX and eventY coordinates of the touch down event, and it always seems to collide with the enemy object. Yet, the enemy doesn't always register as being hit, and sometimes a hit is registered when the sprite indicates the touch coordinates were outside of the enemies bounding box. I realise that this probably doesn't mean much without any code, so here's what I've got so far. Be gentle, as this is literally my first attempt at something more than basic movement etc. First off, the MainGamePanel class registers the touch event, and informs the levelmanager class (which is what I set up to monitor/handle enemies) public boolean onTouchEvent(MotionEvent event) { if (event.getAction() == MotionEvent.ACTION_DOWN){ levelManager.handleActionDown((int)event.getX(), (int)event.getY()); targetX=event.getX(); targetY=event.getY(); } if (event.getAction() == MotionEvent.ACTION_MOVE) { //the gestures } if (event.getAction() == MotionEvent.ACTION_UP) { //touch was released } return true; } From there, in the levelmanager class the touch event is passed on to all of the enemies within a list array: public static void handleActionDown(int eventX,int eventY){ hit=false; for (enemy1 en : enemy1array){ en.handleActionDown(eventX, eventY); } } The rest of the collision code is handled within the enemies handleActionDown function: public void handleActionDown(int eventX, int eventY) { if(eventX>this.x-enemy1bitmap.getWidth() && eventX<this.x+enemy1bitmap.getWidth() && eventY>this.y-enemy1bitmap.getHeight() && eventY<this.x+enemy1bitmap.getHeight()){ takeDamage(1); levelmanager.setHit(); } } I should probably be using getWidth()/2 and getHeight()/2 for it to be more accurate, but I expanded the area to test this - although I've noticed no improvement. At this stage, the games detection over whether or not the enemy is hit is spotty at best. Generally it takes two or three attempts before a collision is successfully registered, even though the sprite that is being used for testing and set to the eventX and eventY coordinates always indicates that the collision should have worked. Hopefully someone can steer me in the right direction here, and if more information is needed, ask away! Cheers, -Chris

    Read the article

  • How can I attach a model to the bone of another model?

    - by kaykayman
    I am trying to attach one animated model to one of the bones of another animated model in an XNA game. I've found a few questions/forum posts/articles online which explain how to attach a weapon model to the bone of another model (which is analogous to what I'm trying to achieve), but they don't seem to work for me. So as an example: I want to attach Model A to a specific bone in Model B. Question 1. As I understand it, I need to calculate the transforms which are applied to the bone on Model B and apply these same transforms to every bone in Model A. Is this right? Question 2. This is my code for calculating the Transforms on a specific bone. private Matrix GetTransformPaths(ModelBone bone) { Matrix result = Matrix.Identity; while (bone != null) { result = result * bone.Transform; bone = bone.Parent; } return result; } The maths of Matrices is almost entirely lost on me, but my understanding is that the above will work its way up the bone structure to the root bone and my end result will be the transform of the original bone relative to the model. Is this right? Question 3. Assuming that this is correct I then expect that I should either apply this to each bone in Model A, or in my Draw() method: private void DrawModel(SceneModel model, GameTime gametime) { foreach (var component in model.Components) { Matrix[] transforms = new Matrix[component.Model.Bones.Count]; component.Model.CopyAbsoluteBoneTransformsTo(transforms); Matrix parenttransform = Matrix.Identity; if (!string.IsNullOrEmpty(component.ParentBone)) parenttransform = GetTransformPaths(model.GetBone(component.ParentBone)); component.Player.Update(gametime.ElapsedGameTime, true, Matrix.Identity); Matrix[] bones = component.Player.GetSkinTransforms(); foreach (SkinnedEffect effect in mesh.Effects) { effect.SetBoneTransforms(bones); effect.EnableDefaultLighting(); effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(MathHelper.ToRadians(model.Angle)) * Matrix.CreateTranslation(model.Position) * parenttransform; effect.View = getView(); effect.Projection = getProjection(); effect.Alpha = model.Opacity; } } mesh.Draw(); } I feel as though I have tried every conceivable way of incorporating the parenttransform value into the draw method. The above is my most recent attempt. Is what I'm trying to do correct? And if so, is there a reason it doesn't work? The above Draw method seems to transpose the models x/z position - but even at these wrong positions, they do not account for the animation of Model B at all. Note: As will be evident from the code my "model" is comprised of a list of "components". It is these "components" that correspond to a single "Microsoft.Xna.Framework.Graphics.Model"

    Read the article

  • Calling functions from different classes

    - by A Ron Hubbard Clevenger
    I'm writing a program and I'm supposed to check and see if a certain object is in the list before I call it. I set up the contains() method which is supposed to use the equals() method of the Comparable interface I implemented on my Golfer class but it doesn't seem to call it (I put print statements in to check). I can't seem to figure out whats wrong with the code, the ArrayUnsortedList class I'm using to go through the list even uses the correct toString() method I defined in my Golfer class but for some reason it won't use the equals() method I implemented. //From "GolfApp.java" public class GolfApp{ ListInterface <Golfer>golfers = new ArraySortedList<Golfer> (20); Golfer golfer; //..*snip*.. if(this.golfers.contains(new Golfer(name,score))) System.out.println("The list already contains this golfer"); else{ this.golfers.add(this.golfer = new Golfer(name,score)); System.out.println("This golfer is already on the list"); } //From "ArrayUnsortedList.java" protected void find(T target){ location = 0; found = false; while (location < numElements){ if (list[location].equals(target)) //Where I think the problem is { found = true; return; } else location++; } } public boolean contains(T element){ find(element); return found; } //From "Golfer.java" public class Golfer implements Comparable<Golfer>{ //..irrelavant code sniped..// public boolean equals(Golfer golfer) { String thisString = score + ":" + name; String otherString = golfer.getScore() + ":" + golfer.getName() ; System.out.println("Golfer.equals() has bee called"); return thisString.equalsIgnoreCase(otherString); } public String toString() { return (score + ":" + name); } My main problem seems to be getting the find function of the ArrayUnsortedList to call my equals function in the find() part of the List but I'm not exactly sure why, like I said when I have it printed out it works with the toString() method I implemented perfectly. I'm almost positive the problem has to do with the find() function in the ArraySortedList not calling my equals() method. I tried using some other functions that relied on the find() method and got the same results.

    Read the article

  • Android Swipe In Unity 3D World with AR

    - by Christian
    I am working on an AR application using Unity3D and the Vuforia SDK for Android. The way the application works is a when the designated image(a frame marker in our case) is recognized by the camera, a 3D island is rendered at that spot. Currently I am able to detect when/which objects are touched on the model by raycasting. I also am able to successfully detect a swipe using this code: if (Input.touchCount > 0) { Touch touch = Input.touches[0]; switch (touch.phase) { case TouchPhase.Began: couldBeSwipe = true; startPos = touch.position; startTime = Time.time; break; case TouchPhase.Moved: if (Mathf.Abs(touch.position.y - startPos.y) > comfortZoneY) { couldBeSwipe = false; } //track points here for raycast if it is swipe break; case TouchPhase.Stationary: couldBeSwipe = false; break; case TouchPhase.Ended: float swipeTime = Time.time - startTime; float swipeDist = (touch.position - startPos).magnitude; if (couldBeSwipe && (swipeTime < maxSwipeTime) && (swipeDist > minSwipeDist)) { // It's a swiiiiiiiiiiiipe! float swipeDirection = Mathf.Sign(touch.position.y - startPos.y); // Do something here in reaction to the swipe. swipeCounter.IncrementCounter(); } break; } touchInfo.SetTouchInfo (Time.time-startTime,(touch.position-startPos).magnitude,Mathf.Abs (touch.position.y-startPos.y)); } Thanks to andeeeee for the logic. But I want to have some interaction in the 3D world based on the swipe on the screen. I.E. If the user swipes over unoccluded enemies, they die. My first thought was to track all the points in the moved TouchPhase, and then if it is a swipe raycast into all those points and kill any enemy that is hit. Is there a better way to do this? What is the best approach? Thanks for the help!

    Read the article

  • Questions about game states

    - by MrPlow
    I'm trying to make a framework for a game I've wanted to do for quite a while. The first thing that I decided to implement was a state system for game states. When my "original" idea of having a doubly linked list of game states failed I found This blog and liked the idea of a stack based game state manager. However there were a few things I found weird: Instead of RAII two class methods are used to initialize and destroy the state Every game state class is a singleton(and singletons are bad aren't they?) Every GameState object is static So I took the idea and altered a few things and got this: GameState.h class GameState { private: bool m_paused; protected: StateManager& m_manager; public: GameState(StateManager& manager) : m_manager(manager), m_paused(false){} virtual ~GameState() {} virtual void update() = 0; virtual void draw() = 0; virtual void handleEvents() = 0; void pause() { m_paused = true; } void resume() { m_paused = false; } void changeState(std::unique_ptr<GameState> state) { m_manager.changeState(std::move(state)); } }; StateManager.h class GameState; class StateManager { private: std::vector< std::unique_ptr<GameState> > m_gameStates; public: StateManager(); void changeState(std::unique_ptr<GameState> state); void StateManager::pushState(std::unique_ptr<GameState> state); void popState(); void update(); void draw(); void handleEvents(); }; StateManager.cpp StateManager::StateManager() {} void StateManager::changeState( std::unique_ptr<GameState> state ) { if(!m_gameStates.empty()) { m_gameStates.pop_back(); } m_gameStates.push_back( std::move(state) ); } void StateManager::pushState(std::unique_ptr<GameState> state) { if(!m_gameStates.empty()) { m_gameStates.back()->pause(); } m_gameStates.push_back( std::move(state) ); } void StateManager::popState() { if(!m_gameStates.empty()) m_gameStates.pop_back(); } void StateManager::update() { if(!m_gameStates.empty()) m_gameStates.back()->update(); } void StateManager::draw() { if(!m_gameStates.empty()) m_gameStates.back()->draw(); } void StateManager::handleEvents() { if(!m_gameStates.empty()) m_gameStates.back()->handleEvents(); } And it's used like this: main.cpp StateManager states; states.changeState( std::unique_ptr<GameState>(new GameStateIntro(states)) ); while(gamewindow::gameWindow.isOpen()) { states.handleEvents(); states.update(); states.draw(); } Constructors/Destructors are used to create/destroy states instead of specialized class methods, state objects are no longer static but

    Read the article

  • Multithreading: Communication from Parent thread to child thread

    - by Dennis Nowland
    I have a List of threads normally 3 threads each of the threads reference a webbrowser control that communicates with the parent control to populate a datagridview. What I need to do is when the user clicks the button in a datagridviewButtonCell corresponding data will be sent back to the webbrowser control within the child thread that originally communicated with the main thread. but when I try to do this I receive the following error message 'COM object that has been separated from its underlying RCW cannot be used.' my problem is that I can not figure out how to reference the relevant webbrowser control. I would appreciate any help that anyone can give me. The language used is c# winforms .Net 4.0 targeted Code sample: The following code is executed when user click on the Start button in the main thread private void StartSubmit(object idx) { /* method used by the new thread to initialise a 'myBrowser' inherited from the webbrowser control each submitters object is an a custom Control called 'myBrowser' which holds detail about the function of the object eg: */ //index: is an integer value which represents the threads id int index = (int)idx; //submitters[index] is an instance of the 'myBrowser' control submitters[index] = new myBrowser(); //threads integer id submitters[index]._ThreadNum = index; // naming convention used 'browser' +the thread index submitters[index].Name = "browser" + index; //set list in 'myBrowser' class to hold a copy of the list found in the main thread submitters[index]._dirs = dirLists[index]; // suppress and javascript errors the may occur in the 'myBrowser' control submitters[index].ScriptErrorsSuppressed = true; //execute eventHandler submitters[index].DocumentCompleted += new WebBrowserDocumentCompletedEventHandler(DocumentCompleted); //advance to the next un-opened address in datagridview the navigate the that address //in the 'myBrowser' control. SetNextDir(submitters[index]); } private void btnStart_Click(object sender, EventArgs e) { // used to fill list<string> for use in each thread. fillDirs(); //connections is the list<Thread> holding the thread that have been opened //1 to 10 maximum for (int n = 0; n < (connections.Length); n++) { //initialise new thread to the StartSubmit method passing parameters connections[n] = new Thread(new ParameterizedThreadStart(StartSubmit)); // naming convention used conn + the threadIndex ie: 'conn1' to 'conn10' connections[n].Name = "conn" + n.ToString(); // due to the webbrowser control needing to be ran in the single //apartment state connections[n].SetApartmentState(ApartmentState.STA); //start thread passing the threadIndex connections[n].Start(n); } } Once the 'myBrowser' control is fully loaded I am inserting form data into webforms found in webpages loaded via data enter into rows found in the datagridview. Once a user has entered the relevant details into the different areas in the row the can then clicking a DataGridViewButtonCell that has tha collects the data entered and then has to be send back to the corresponding 'myBrowser' object that is found on a child thread. Thank you

    Read the article

  • Two interfaces with identical signatures

    - by corsiKa
    I am attempting to model a card game where cards have two important sets of features: The first is an effect. These are the changes to the game state that happen when you play the card. The interface for effect is as follows: boolean isPlayable(Player p, GameState gs); void play(Player p, GameState gs); And you could consider the card to be playable if and only if you can meet its cost and all its effects are playable. Like so: // in Card class boolean isPlayable(Player p, GameState gs) { if(p.resource < this.cost) return false; for(Effect e : this.effects) { if(!e.isPlayable(p,gs)) return false; } return true; } Okay, so far, pretty simple. The other set of features on the card are abilities. These abilities are changes to the game state that you can activate at-will. When coming up with the interface for these, I realized they needed a method for determining whether they can be activated or not, and a method for implementing the activation. It ends up being boolean isActivatable(Player p, GameState gs); void activate(Player p, GameState gs); And I realize that with the exception of calling it "activate" instead of "play", Ability and Effect have the exact same signature. Is it a bad thing to have multiple interfaces with an identical signature? Should I simply use one, and have two sets of the same interface? As so: Set<Effect> effects; Set<Effect> abilities; If so, what refactoring steps should I take down the road if they become non-identical (as more features are released), particularly if they're divergent (i.e. they both gain something the other shouldn't, as opposed to only one gaining and the other being a complete subset)? I'm particularly concerned that combining them will be non-sustainable as soon as something changes. The fine print: I recognize this question is spawned by game development, but I feel it's the sort of problem that could just as easily creep up in non-game development, particularly when trying to accommodate the business models of multiple clients in one application as happens with just about every project I've ever done with more than one business influence... Also, the snippets used are Java snippets, but this could just as easily apply to a multitude of object oriented languages.

    Read the article

  • Library to fake intermittent failures according to tester-defined policy?

    - by crosstalk
    I'm looking for a library that I can use to help mock a program component that works only intermittently - usually, it works fine, but sometimes it fails. For example, suppose I need to read data from a file, and my program has to avoid crashing or hanging when a read fails due to a disk head crash. I'd like to model that by having a mock data reader function that returns mock data 90% of the time, but hangs or returns garbage otherwise. Or, if I'm stress-testing my full program, I could turn on debugging code in my real data reader module to make it return real data 90% of the time and hang otherwise. Now, obviously, in this particular example I could just code up my mock manually to test against a random() routine. However, I was looking for a system that allows implementing any failure policy I want, including: Fail randomly 10% of the time Succeed 10 times, fail 4 times, repeat Fail semi-randomly, such that one failure tends to be followed by a burst of more failures Any policy the tester wants to define Furthermore, I'd like to be able to change the failure policy at runtime, using either code internal to the program under test, or external knobs or switches (though the latter can be implemented with the former). In pig-Java, I'd envision a FailureFaker interface like so: interface FailureFaker { /** Return true if and only if the mocked operation succeeded. Implementors should override this method with versions consistent with their failure policy. */ public boolean attempt(); } And each failure policy would be a class implementing FailureFaker; for example there would be a PatternFailureFaker that would succeed N times, then fail M times, then repeat, and a AlwaysFailFailureFaker that I'd use temporarily when I need to simulate, say, someone removing the external hard drive my data was on. The policy could then be used (and changed) in my mock object code like so: class MyMockComponent { FailureFaker faker; public void doSomething() { if (faker.attempt()) { // ... } else { throw new RuntimeException(); } } void setFailurePolicy (FailureFaker policy) { this.faker = policy; } } Now, this seems like something that would be part of a mocking library, so I wouldn't be surprised if it's been done before. (In fact, I got the idea from Steve Maguire's Writing Solid Code, where he discusses this exact idea on pages 228-231, saying that such facilities were common in Microsoft code of that early-90's era.) However, I'm only familiar with EasyMock and jMockit for Java, and neither AFAIK have this function, or something similar with different syntax. Hence, the question: Do such libraries as I've described above exist? If they do, where have you found them useful? If you haven't found them useful, why not?

    Read the article

  • Removing Menu Items from Window Tabs

    - by Geertjan
    So you're working on your NetBeans Platform application and you notice that when you right-click on tabs in the predefined windows, e.g., the Projects window, you see a long list of popup menus. For whatever the reason is, you decide you don't want those popup menus. You right-click the application and go to the Branding dialog. There you uncheck the checkboxes that are unchecked below: As you can see above, you've removed three features, all of them related to closing the windows in your application. Therefore, "Close" and "Close Group" are now gone from the list of popup menus: But that's not enough. You also don't want the popup menus that relate to maximizing and minimizing the predefined windows, so you uncheck those checkboxes that relate to that: And, hey, now they're gone too: Next, you decide to remove the feature for floating, i.e., undocking the windows from the main window: And now they're gone too: However, even when you uncheck all the remaining checkboxes, as shown here... You're still left with those last few pesky popup menu items that just will not go away no matter what you do: The reason for the above? Those actions are hardcoded into the action list, which is a bug. Until it is fixed, here's a handy workaround: Set an implementation dependency on "Core - Windows" (core.window). That is, set a dependency and then specify that it is an implementation dependency, i.e., that you'll be using an internal class, not one of the official APIs. In one of your existing modules, or in a new one, make sure you have (in addition to the above) a dependency on Lookup API and Window System API. And then, add the class below to the module: import javax.swing.Action; import org.netbeans.core.windows.actions.ActionsFactory; import org.openide.util.lookup.ServiceProvider; import org.openide.windows.Mode; import org.openide.windows.TopComponent; @ServiceProvider(service = ActionsFactory.class) public class EmptyActionsFactory extends ActionsFactory { @Override public Action[] createPopupActions(TopComponent tc, Action[] actions) { return new Action[]{}; } @Override public Action[] createPopupActions(Mode mode, Action[] actions) { return new Action[]{}; } } Hurray. Farewell to superfluous popup menu items on your window tabs. In the screenshot below, the tab of the Projects window is being right-clicked and no popup menu items are shown, which is true for all the other windows, those that are predefined as well as those that you add afterwards:

    Read the article

  • BizTalk Send Ports, Delivery Notification and ACK / NACK messages

    - by Robert Kokuti
    Recently I worked on an orchestration which sent messages out to a Send Port on a 'fire and forget' basis. The idea was that once the orchestration passed the message to the Messagebox, it was left to BizTalk to manage the sending process. Should the send operation fail, the Send Port got suspended, and the orchestration completed asynchronously, regardless of the Send Port success or failure. However, we still wanted to log the sending success, using the ACK / NACK messages. On normal ports, BizTalk generates ACK / NACK messages back to the Messagebox, if the logical port's Delivery Notification property is set to 'Transmitted'. Unfortunately, this setting also causes the orchestration to wait for the send port's result, and should the Send Port fail, the orchestration will also receive a 'DeliveryFailureException' exception. So we may end up with a suspended port and a suspended orchestration - not the outcome wanted here, there was no value in suspending the orchestration in our case. There are a couple of ways to fix this: 1. Catch the DeliveryFailureException  (full type name Microsoft.XLANGs.BaseTypes.DeliveryFailureException) and do nothing in the orchestration's exception block. Although this works, it still slows down the orchestration as the orchestration still has to wait for the outcome of the send port operation. 2. Use a Direct Port instead, and set the ACK request on the message Context, prior passing to the port: msgToSend(BTS.AckRequired) = true; This has to be done in an expression shape, as a Direct logical port does not have Delivery Notification property - make sure to add a reference to Microsoft.BizTalk.GlobalPropertySchemas. Setting this context value in the message will cause the messaging agent to create an appropriate ACK or NACK message after the port execution. The ACK / NACK messages can be caught and logged by dedicated Send Ports, filtering on BTS.AckType value (which is either ACK or NACK). ACK/NACK messages are treated in a special way by BizTalk, and a useful feature is that the original message's context values are copied to the ACK/NACK message context - these can be used for logging the right information. Other useful context properties of the ACK/NACK messages: -  BTS.AckSendPortName can be used to identify the original send port. - BTS.AckOwnerID, aka http://schemas.microsoft.com/BizTalk/2003/system-properties.AckOwnerID - holds the instance ID of the failed Send Port - can be used to resubmit / terminate the instance Someone may ask, can we just turn off the Delivery Notification on a 'normal' port, and set the AckRequired property on the message as for a Direct port. Unfortunately, this does not work - BizTalk seems to remove this property automatically, if the message goes through a port where Delivery Notification is set to None.

    Read the article

  • Should custom data elements be stored as XML or database entries?

    - by meteorainer
    There are a ton of questions like this, but they are mostly very generalized, so I'd like to get some views on my specific usage. General: I'm building a new project on my own in Django. It's focus will be on small businesses. I'd like to make it somewhat customizble for my clients so they can add to their customer/invoice/employee/whatever items. My models would reflect boilerplate items that all ModelX might have. For example: first name last name email address ... Then my user's would be able to add fields for whatever data they might like. I'm still in design phase and am building this myself, so I've got some options. Working on... Right now the 'extra items' models have a FK to the generic model (Customer and CustomerDataPoints for example). All values in the extra data points are stored as char and will be coerced/parced into their actual format at view building. In this build the user could theoretically add whatever values they want, group them in sets and generally access them at will from the views relavent to that model. Pros: Low storage overhead, very extensible, searchable Cons: More sql joins My other option is to use some type of markup, or key-value pairing stored directly onto the boilerplate models. This coul essentially just be any low-overhead method weather XML or literal strings. The view and form generated from the stored data would be taking control of validation and reoganizing on updates. Then it would just dump the data back in as a char/blob/whatever. Something like: <datapoint type='char' value='something' required='true' /> <datapoint type='date' value='01/01/2001' required='false' /> ... Pros: No joins needed, Updates for validation and views are decoupled from data Cons: Much higher storage overhead, limited capacity to search on extra content So my question is: If you didn't live in the contraints impose by your company what method would you use? Why? What benefits or pitfalls do you see down the road for me as a small business trying to help other small businesses? Just to clarify, I am not asking about custom UI elements, those I can handle with forms and template snippets. I'm asking primarily about data storage and retreival of non standardized data relative to a boilerplate model.

    Read the article

  • Upgarde from Asp.Net MVC 1 to MVC 2 - how to and issues with JsonRequestBehavior

    - by Renso
    Goal Upgrade your MVC 1 app to MVC 2 Issues You may get errors about your Json data being returned via a GET request violating security principles - we also address this here. This post is not intended to delve into why the Json GET request is or may be an issue, just how to resolve it as part of upgrading from MVC1 to 2. Solution First remove all references from your projects to the MVC 1 dll and replace it with the MVC 2 dll. Now update your web.config file in your web app root folder by simply changing references to assembly="System.Web.Mvc, Version 1.0.0.0 to Version 2.0.0.0, there are a couple of references in your config file, here are probably most of them you may have:         <compilation debug="true" defaultLanguage="c#">             <assemblies>                        <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />             </assemblies>         </compilation>           <pages masterPageFile="~/Views/Masters/CRMTemplate.master" pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validateRequest="False">             <controls>                 <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />   Secondly, if you return Json objects from an ajax call via the GET method you ahve several options to fix this depending on your situation: 1. The simplest, as in my case I did this for an internal web app, you may simply do:             return Json(myObject, JsonRequestBehavior.AllowGet);   2. In Mvc if you have a controller base you could wrap the Json method with:         public new JsonResult Json(object data)         {             return Json(data, "application/json", JsonRequestBehavior.AllowGet);                    }   3. The most work would be to decorate your Actions with:         [AcceptVerbs(HttpVerbs.Get)]   4. Another tnat is also a lot of work that needs to be done to every ajax call returning Json is:                             msg = $.ajax({ url: $('#ajaxGetSampleUrl').val(), dataType: 'json', type: 'POST', async: false, data: { name: theClass }, success: function(data, result) { if (!result) alert('Failure to retrieve the Sample Data.'); } }).responseText;   This should cover all the issues you may run into when upgrading. Let me kow if you run into any other ones.

    Read the article

  • Map and fill texture using PBO (OpenGL 3.3)

    - by NtscCobalt
    I'm learning OpenGL 3.3 trying to do the following (as it is done in D3D)... Create Texture of Width, Height, Pixel Format Map texture memory Loop write pixels Unmap texture memory Set Texture Render Right now though it renders as if the entire texture is black. I can't find a reliable source for information on how to do this though. Almost every tutorial I've found just uses glTexSubImage2D and passes a pointer to memory. Here is basically what my code does... (In this case it is generating an 1-byte Alpha Only texture but it is rendering it as the red channel for debugging) GLuint pixelBufferID; glGenBuffers(1, &pixelBufferID); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, pixelBufferID); glBufferData(GL_PIXEL_UNPACK_BUFFER, 512 * 512 * 1, nullptr, GL_STREAM_DRAW); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); GLuint textureID; glGenTextures(1, &textureID); glBindTexture(GL_TEXTURE_2D, textureID); glTexImage2D(GL_TEXTURE_2D, 0, GL_R8, 512, 512, 0, GL_RED, GL_UNSIGNED_BYTE, nullptr); glBindTexture(GL_TEXTURE_2D, 0); glBindTexture(GL_TEXTURE_2D, textureID); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, pixelBufferID); void *Memory = glMapBuffer(GL_PIXEL_UNPACK_BUFFER, GL_WRITE_ONLY); // Memory copied here, I know this is valid because it is the same loop as in my working D3D version glUnmapBuffer(GL_PIXEL_UNPACK_BUFFER); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); And then here is the render loop. // This chunk left in for completeness glUseProgram(glProgramId); glBindVertexArray(glVertexArrayId); glBindBuffer(GL_ARRAY_BUFFER, glVertexBufferId); glEnableVertexAttribArray(0); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 20, 0); glVertexAttribPointer(0, 2, GL_FLOAT, GL_FALSE, 20, 12); GLuint transformLocationID = glGetUniformLocation(3, 'transform'); glUniformMatrix4fv(transformLocationID , 1, true, somematrix) // Not sure if this is all I need to do glBindTexture(GL_TEXTURE_2D, pTex->glTextureId); GLuint textureLocationID = glGetUniformLocation(glProgramId, "texture"); glUniform1i(textureLocationID, 0); glDrawArrays(GL_TRIANGLES, Offset*3, Triangles*3); Vertex Shader #version 330 core in vec3 Position; in vec2 TexCoords; out vec2 TexOut; uniform mat4 transform; void main() { TexOut = TexCoords; gl_Position = vec4(Position, 1.0) * transform; } Pixel Shader #version 330 core uniform sampler2D texture; in vec2 TexCoords; out vec4 fragColor; void main() { // Output color fragColor.r = texture2D(texture, TexCoords).r; fragColor.g = 0.0f; fragColor.b = 0.0f; fragColor.a = 1.0; }

    Read the article

  • How to snap a 2D Quad to the mouse cursor using OpenGL 3.0/WIN32?

    - by NoobScratcher
    I've been having issues trying to snap a 2D Quad to the mouse cursor position I'm able : 1.) To get values into posX, posY, posZ 2.) Translate with the values from those 3 variables But the quad positioning I'm not able to do correctly in such a way that the 2D Quad is near the mouse cursor using those values from those 3 variables eg."posX, posY, posZ" I need the mouse cursor in the center of the 2D Quad. I'm hoping someone can help me achieve this. I've tried searching around with no avail. Heres the function that is ment to do the snapping but instead creates weird flicker or shows nothing at all only the 3d models show up : void display() { glClearColor(0.0,0.0,0.0,1.0); glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT); for(std::vector<GLuint>::iterator I = cube.begin(); I != cube.end(); ++I) { glCallList(*I); } if(DrawArea == true) { glReadPixels(winX, winY, 1, 1, GL_DEPTH_COMPONENT, GL_FLOAT, &winZ); cerr << winZ << endl; glGetDoublev(GL_MODELVIEW_MATRIX, modelview); glGetDoublev(GL_PROJECTION_MATRIX, projection); glGetIntegerv(GL_VIEWPORT, viewport); gluUnProject(winX, winY, winZ , modelview, projection, viewport, &posX, &posY, & posZ); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_DECAL); glTexImage2D (GL_TEXTURE_2D, 0, GL_RGB, DrawAreaSurface->w, DrawAreaSurface->h, 0, GL_RGBA, GL_UNSIGNED_BYTE, DrawAreaSurface->pixels); glEnable(GL_TEXTURE_2D); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glTranslatef(posX , posY, posZ); glBegin(GL_QUADS); glTexCoord2f (0.0, 0.0); glVertex3f(0.5, 0.5, 0); glTexCoord2f (1.0, 0.0); glVertex3f(0, 0.5, 0); glTexCoord2f (1.0, 1.0); glVertex3f(0, 0, 0); glTexCoord2f (0.0, 1.0); glVertex3f(0.5, 0, 0); glEnd(); } SwapBuffers(hDC); } I'm using : OpenGL 3.0 WIN32 API C++ GLSL if you really want the full source here it is - http://pastebin.com/1Ncm9HNf , Its pretty messy.

    Read the article

  • Minimizing Dependencies For GUIs

    - by tuba09
    I've been working on a project, and have been charged with designing the projects GUI front-end. I'm coding in Java and using the Swing toolkit. Usability-wise, the GUI front-end follows all of Nielsen's heuristics. Users can easily get to where they want to go through the click of a button / JComboBox. Essentially, in Swing terms, what happens is their actions drive the creation/deletion of custom panels. The GUI is coming along fine for the most part. However, I have to admit to being utterly dismayed at the tight web of dependencies my code is being smothered in. The main problem that I've encountered, that I haven't been able to fix as of yet, is how to keep a reference to the panels/buttons being changed. I'll give an example: Say there's a button A Say there's a panel B displaying picture C Say there's another picture D (not currently being displayed by panel B) When user clicks A, panel B should remove picture C and display picture D My question is, what's the best way of keeping track of panel B? Since I need a global point of access to panel B, my solution has so far been to just shoehorn it into a static variable, and access it through a series of static getters and setters. And this static variable is usually stored in the reference's original class. I.e. UserPanel has a static variable that stores a reference to itself. Is there an easy, tried-and-true way of dealing with these kinds of situations? Like my GUI works fine, but it is not modular and/or robust at all. To add to this, the dreaded 'cyclical dependencies' issue that's shunned by so many programmers is out here in full effect. I'm fairly new to development and just want to make sure that my code will be fairly extensible and won't cause much of a headache to the next person that decides to get a try at it. I know there's loads of books out there that probably have a nice elegant solution to this, but unfortunately I just don't have the time to leisure read right now. I need something that's quick and dirty. Thanks in advance

    Read the article

  • Enum types, FlagAttribute & Zero value

    - by nmgomes
    We all know about Enums types and use them every single day. What is not that often used is to decorate the Enum type with the FlagsAttribute. When an Enum type has the FlagsAttribute we can assign multiple values to it and thus combine multiple information into a single enum. The enum values should be a power of two so that a bit set is achieved. Here is a typical Enum type: public enum OperationMode { /// <summary> /// No operation mode /// </summary> None = 0, /// <summary> /// Standard operation mode /// </summary> Standard = 1, /// <summary> /// Accept bubble requests mode /// </summary> Parent = 2 } In such scenario no values combination are possible. In the following scenario a default operation mode exists and combination is used: [Flags] public enum OperationMode { /// <summary> /// Asynchronous operation mode /// </summary> Async = 0, /// <summary> /// Synchronous operation mode /// </summary> Sync = 1, /// <summary> /// Accept bubble requests mode /// </summary> Parent = 2 } Now, it’s possible to do statements like: [DefaultValue(OperationMode.Async)] [TypeConverter(typeof(EnumConverter))] public OperationMode Mode { get; set; } /// <summary> /// Gets a value indicating whether this instance supports request from childrens. /// </summary> public bool IsParent { get { return (this.Mode & OperationMode.Parent) == OperationMode.Parent; } } or switch (this.Mode) { case OperationMode.Sync | OperationMode.Parent: Console.WriteLine("Sync,Parent"); break;[…]  But there is something that you should never forget: Zero is the absorber element for the bitwise AND operation. So, checking for OperationMode.Async (the Zero value) mode just like the OperationMode.Parent mode makes no sense since it will always be true: (this.Mode & 0x0) == 0x0 Instead, inverse logic should be used: OperationMode.Async = !OperationMode.Sync public bool IsAsync { get { return (this.Mode & ContentManagerOperationMode.Sync) != ContentManagerOperationMode.Sync; } } or public bool IsAsync { get { return (int)this.Mode == 0; } } Final Note: Benefits Allow multiple values combination The above samples snippets were taken from an ASP.NET control and enabled the following markup usage: <my:Control runat="server" Mode="Sync,Parent"> Drawback Zero value is the absorber element for the bitwise AND operation Be very carefully when evaluating the Zero value, either evaluate the enum value as an integer or use inverse logic.

    Read the article

  • Web Apps vs Web Services: 302s and 401s are not always good Friends

    - by Your DisplayName here!
    It is not very uncommon to have web sites that have web UX and services content. The UX part maybe uses WS-Federation (or some other redirect based mechanism). That means whenever an authorization error occurs (401 status code), this is picked by the corresponding redirect module and turned into a redirect (302) to the login page. All is good. But in services, when you emit a 401, you typically want that status code to travel back to the client agent, so it can do error handling. These two approaches conflict. If you think (like me) that you should separate UX and services into separate apps, you don’t need to read on. Just do it ;) If you need to mix both mechanisms in a single app – here’s how I solved it for a project. I sub classed the redirect module – this was in my case the WIF WS-Federation HTTP module and modified the OnAuthorizationFailed method. In there I check for a special HttpContext item, and if that is present, I suppress the redirect. Otherwise everything works as normal: class ServiceAwareWSFederationAuthenticationModule : WSFederationAuthenticationModule {     protected override void OnAuthorizationFailed(AuthorizationFailedEventArgs e)     {         base.OnAuthorizationFailed(e);         var isService = HttpContext.Current.Items[AdvertiseWcfInHttpPipelineBehavior.DefaultLabel];         if (isService != null)         {             e.RedirectToIdentityProvider = false;         }     } } Now the question is, how do you smuggle that value into the HttpContext. If it is a MVC based web service, that’s easy of course. In the case of WCF, one approach that worked for me was to set it in a service behavior (dispatch message inspector to be exact): public void BeforeSendReply( ref Message reply, object correlationState) {     if (HttpContext.Current != null)     {         HttpContext.Current.Items[DefaultLabel] = true;     } } HTH

    Read the article

  • Mixing Forms and Token Authentication in a single ASP.NET Application

    - by Your DisplayName here!
    I recently had the task to find out how to mix ASP.NET Forms Authentication with WIF’s WS-Federation. The FormsAuth app did already exist, and a new sub-directory of this application should use ADFS for authentication. Minimum changes to the existing application code would be a plus ;) Since the application is using ASP.NET MVC this was quite easy to accomplish – WebForms would be a little harder, but still doable. I will discuss the MVC solution here. To solve this problem, I made the following changes to the standard MVC internet application template: Added WIF’s WSFederationAuthenticationModule and SessionAuthenticationModule to the modules section. Add a WIF configuration section to configure the trust with ADFS. Added a new authorization attribute. This attribute will go on controller that demand ADFS (or STS in general) authentication. The attribute logic is quite simple – it checks for authenticated users – and additionally that the authentication type is set to Federation. If that’s the case all is good, if not, the redirect to the STS will be triggered. public class RequireTokenAuthenticationAttribute : AuthorizeAttribute {     protected override bool AuthorizeCore(HttpContextBase httpContext)     {         if (httpContext.User.Identity.IsAuthenticated &&             httpContext.User.Identity.AuthenticationType.Equals( WIF.AuthenticationTypes.Federation, StringComparison.OrdinalIgnoreCase))         {             return true;         }                     return false;     }     protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)     {                    // do the redirect to the STS         var message = FederatedAuthentication.WSFederationAuthenticationModule.CreateSignInRequest( "passive", filterContext.HttpContext.Request.RawUrl, false);         filterContext.Result = new RedirectResult(message.RequestUrl);     } } That’s it ;) If you want to know why this works (and a possible gotcha) – read my next post.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar's Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a 'perfect storm' of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one's work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven't far more qualified and established commentators, MVPs and so on, already said it? While it's a good idea to pick reasonably fresh and interesting topics, it's more important not to let such fears lead to writer's block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn't always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what's involved in getting an application that is 'done' ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we'd love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to 'throw your hat into the ring', drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar’s Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a ‘perfect storm’ of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one’s work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven’t far more qualified and established commentators, MVPs and so on, already said it? While it’s a good idea to pick reasonably fresh and interesting topics, it’s more important not to let such fears lead to writer’s block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn’t always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what’s involved in getting an application that is ‘done’ ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we’d love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to ‘throw your hat into the ring’, drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • Updating an Entity through a Service

    - by GeorgeK
    I'm separating my software into three main layers (maybe tiers would be a better term): Presentation ('Views') Business logic ('Services' and 'Repositories') Data access ('Entities' (e.g. ActiveRecords)) What do I have now? In Presentation, I use read-only access to Entities, returned from Repositories or Services, to display data. $banks = $banksRegistryService->getBanksRepository()->getBanksByCity( $city ); $banksViewModel = new PaginatedList( $banks ); // some way to display banks; // example, not real code I find this approach quite efficient in terms of performance and code maintanability and still safe as long as all write operations (create, update, delete) are preformed through a Service: namespace Service\BankRegistry; use Service\AbstractDatabaseService; use Service\IBankRegistryService; use Model\BankRegistry\Bank; class Service extends AbstractDatabaseService implements IBankRegistryService { /** * Registers a new Bank * * @param string $name Bank's name * @param string $bik Bank's Identification Code * @param string $correspondent_account Bank's correspondent account * * @return Bank */ public function registerBank( $name, $bik, $correspondent_account ) { $bank = new Bank(); $bank -> setName( $name ) -> setBik( $bik ) -> setCorrespondentAccount( $correspondent_account ); if( null === $this->getBanksRepository()->getDefaultBank() ) $this->setDefaultBank( $bank ); $this->getEntityManager()->persist( $bank ); return $bank; } /** * Makes the $bank system's default bank * * @param Bank $bank * @return IBankRegistryService */ public function setDefaultBank( Bank $bank ) { $default_bank = $this->getBanksRepository()->getDefaultBank(); if( null !== $default_bank ) $default_bank->setDefault( false ); $bank->setDefault( true ); return $this; } } Where am I stuck? I'm struggling about how to update certain fields in Bank Entity. Bad solution #1: Making a series of setters in Service for each setter in Bank; - seems to be quite reduntant, increases Service interface complexity and proportionally decreases it's simplicity - something to avoid if you care about code maitainability. I try to follow KISS and DRY principles. Bad solution #2: Modifying Bank directly through it's native setters; - really bad. If you'll ever need to move modification into the Service, it will be pain. Business logic should remain in Business logic layer. Plus, there are plans on logging all of the actions and maybe even involve user permissions (perhaps, through decorators) in future, so all modifications should be made only through the Service. Possible good solution: Creating an updateBank( Bank $bank, $array_of_fields_to_update) method; - makes the interface as simple as possible, but there is a problem: one should not try to manually set isDefault flag on a Bank, this operation should be performed through setDefaultBank method. It gets even worse when you have relations that you don't want to be directly modified. Of course, you can just limit the fields that can be modified by this method, but how do you tell method's user what they can and cannot modify? Exceptions?

    Read the article

  • What causes Box2D revolute joints to separate?

    - by nbolton
    I have created a rag doll using dynamic bodies (rectangles) and simple revolute joints (with lower and upper angles). When my rag doll hits the ground (which is a static body) the bodies seem to fidget and the joints separate. It looks like the bodies are sticking to the ground, and the momentum of the rag doll pulls the joint apart (see screenshot below). I'm not sure if it's related, but I'm using the Badlogic GDX Java wrapper for Box2D. Here's some snippets of what I think is the most relevant code: private RevoluteJoint joinBodyParts( Body a, Body b, Vector2 anchor, float lowerAngle, float upperAngle) { RevoluteJointDef jointDef = new RevoluteJointDef(); jointDef.initialize(a, b, a.getWorldPoint(anchor)); jointDef.enableLimit = true; jointDef.lowerAngle = lowerAngle; jointDef.upperAngle = upperAngle; return (RevoluteJoint)world.createJoint(jointDef); } private Body createRectangleBodyPart( float x, float y, float width, float height) { PolygonShape shape = new PolygonShape(); shape.setAsBox(width, height); BodyDef bodyDef = new BodyDef(); bodyDef.type = BodyType.DynamicBody; bodyDef.position.y = y; bodyDef.position.x = x; Body body = world.createBody(bodyDef); FixtureDef fixtureDef = new FixtureDef(); fixtureDef.shape = shape; fixtureDef.density = 10; fixtureDef.filter.groupIndex = -1; fixtureDef.filter.categoryBits = FILTER_BOY; fixtureDef.filter.maskBits = FILTER_STUFF | FILTER_WALL; body.createFixture(fixtureDef); shape.dispose(); return body; } I've skipped the method for creating the head, as it's pretty much the same as the rectangle method (just using a cricle shape). Those methods are used like so: torso = createRectangleBodyPart(x, y + 5, 0.25f, 1.5f); Body head = createRoundBodyPart(x, y + 7.4f, 1); Body leftLegTop = createRectangleBodyPart(x, y + 2.7f, 0.25f, 1); Body rightLegTop = createRectangleBodyPart(x, y + 2.7f, 0.25f, 1); Body leftLegBottom = createRectangleBodyPart(x, y + 1, 0.25f, 1); Body rightLegBottom = createRectangleBodyPart(x, y + 1, 0.25f, 1); Body leftArm = createRectangleBodyPart(x, y + 5, 0.25f, 1.2f); Body rightArm = createRectangleBodyPart(x, y + 5, 0.25f, 1.2f); joinBodyParts(torso, head, new Vector2(0, 1.6f), headAngle); leftLegTopJoint = joinBodyParts(torso, leftLegTop, new Vector2(0, -1.2f), 0.1f, legAngle); rightLegTopJoint = joinBodyParts(torso, rightLegTop, new Vector2(0, -1.2f), 0.1f, legAngle); leftLegBottomJoint = joinBodyParts(leftLegTop, leftLegBottom, new Vector2(0, -1), -legAngle * 1.5f, 0); rightLegBottomJoint = joinBodyParts(rightLegTop, rightLegBottom, new Vector2(0, -1), -legAngle * 1.5f, 0); leftArmJoint = joinBodyParts(torso, leftArm, new Vector2(0, 1), -armAngle * 0.7f, armAngle); rightArmJoint = joinBodyParts(torso, rightArm, new Vector2(0, 1), -armAngle * 0.7f, armAngle);

    Read the article

< Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >