Search Results

Search found 28784 results on 1152 pages for 'start'.

Page 655/1152 | < Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >

• My Android phone isn't being detected by Ubuntu

  - by Lara

  This is what I've got from terminal, looks like it can see the phone as a USB device just fine but isn't showing up under fdisk so I can't mount it. It automounts just fine in my VMWare Windows. And Internet tethering works fine while under Linux (haven't tried under Windows). Here's lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 019: ID 04d9:1135 Holtek Semiconductor, Inc. Bus 001 Device 003: ID 05ca:18c0 Ricoh Co., Ltd Bus 001 Device 004: ID 0489:e00f Foxconn / Hon Hai Foxconn T77H114 BCM2070 [Single-Chip Bluetooth 2.1 + EDR Adapter] Bus 003 Device 010: ID 04e8:6860 Samsung Electronics Co., Ltd Bus 002 Device 012: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard And here's sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001ff06 Device Boot Start End Blocks Id System /dev/sda1 2048 681845797 340921875 7 HPFS/NTFS/exFAT /dev/sda2 * 681846784 845686783 81920000 83 Linux /dev/sda3 845686784 968566783 61440000 7 HPFS/NTFS/exFAT /dev/sda4 968568830 972475081 1953126 5 Extended /dev/sda5 968568832 972475081 1953125 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 2000 MB, 2000000000 bytes 255 heads, 63 sectors/track, 243 cylinders, total 3906250 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe4c2ec7 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• Do you tend to write your own name or your company name in your code?

  - by Connell Watkins

  I've been working on various projects at home and at work, and over the years I've developed two main APIs that I use in almost all AJAX based websites. I've compiled both of these into DLLs and called the namespaces Connell.Database and Connell.Json. My boss recently saw these namespaces in a software documentation for a project for the company and said I shouldn't be using my own name in the code. (But it's my code!) One thing to bear in mind is that we're not a software company. We're an IT support company, and I'm the only full-time software developer here, so there's not really any procedures on how we should write software in the company. Another thing to bear in mind is that I do intend on one day releasing these DLLs as open-source projects. How do other developers group their namespaces within their company? Does anyone use the same class libraries in personal and in work projects? Also does this work the other way round? If I write a class library entirely at work, who owns that code? If I've seen the library through from start to finish, designed it and programmed it. Can I use that for another project at home? Thanks, Update I've spoken to my boss about this issue and he agrees that they're my objects and he's fine for me to open-source them. Before this conversation I started changing the objects anyway, which was actually quite productive and the code now suits this specific project more-so than it did previously. But thank you to everyone involved for a very interesting debate. I hope all this text isn't wasted and someone learns from it. I certainly did. Cheers,

  Read the article

• Question about mipmaps + anisotropic filtering

  - by Telanor

  I'm a bit confused here and maybe someone can explain this to me. I created a simple test texture for my terrain which is nothing more than a solid green color with a black grid overlayed on top of it. If I look at the terrain in the distance with mipmapping on and linear filtering, the grid lines become blurry fairly quickly and further back the grid is pretty much invisible. With these settings, I don't get any moire patterns at all. If I turn on anisotropic filtering, however, the higher the anisotropic level, the more the terrain looks like it did with without mipmapping. The lines are much crisper nearby but in the distance I start to see terrible moire patterns. My understanding was that mipmapping is supposed to get rid of moire patterns. I've always had anisotropic filtering on in every game I play and I've never noticed any moire patterns as a result, so I don't understand why it's happening in my game. I am using logarithmic depth however, could that be causing any problems? And if it is, how do I resolve it? I've created my sampler state like so (I'm using slimdx): ssa = SamplerState.FromDescription(Engine.Device, new SamplerDescription { AddressU = TextureAddressMode.Clamp, AddressV = TextureAddressMode.Clamp, AddressW = TextureAddressMode.Clamp, Filter = Filter.Anisotropic, MaximumAnisotropy = anisotropicLevel, MinimumLod = 0, MaximumLod = float.MaxValue });

  Read the article

• SEHException throw using Microsoft XACT Audio Framework (XACT3)

  - by Sweta Dwivedi

  I have been developing a game using Kinect + XNA and using Microsoft Audio Creation tool (XACT3) for managing my sound files and music, however in the code an SEHException is thrown whenever it tries to get the wave file from the wave Bank . . Sometimes the code works magically and all of a sudden it will start throwing this exception randomly ..I need a help on solving this exception /*Declaring Audio Engine for music*/ AudioEngine engine; SoundBank soundBank; WaveBank waveBank; Cue cue; /*Declaring Audio engine for sound effects*/ AudioEngine engine1; SoundBank soundbank; WaveBank wavebank; Cue effect; engine = new AudioEngine(@"Content\therapy.xgs"); soundBank = new SoundBank(engine, @"Content\Sound Bank.xsb"); **waveBank = new WaveBank(engine, @"Content\Wave Bank.xwb");** cue = null; engine1 = new AudioEngine(@"Content\Music_Manager\Sound_effects.xgs"); soundbank = new SoundBank(engine1, @"Content\Music_Manager\Sound1.xsb"); **wavebank = new WaveBank(engine1, @"Content\Music_Manager\Wave1.xwb");** effect = null; cue = soundBank.GetCue("hypnotizing"); cue.Play();

  Read the article

• What's the best way to generate an NPC's face using web technologies?

  - by Vael Victus

  I'm in the process of creating a web app. I have many randomly-generated non-player characters in a database. I can pull a lot of information about them - their height, weight, down to eye color, hair color, and hair style. For this, I am solely interested in generating a graphical representation of the face. Currently the information is displayed with text in the nicest way possible, but I believe it's worth generating these faces for a more... human experience. Problem is, I'm not artist. I wouldn't mind commissioning an artist for this system, but I wouldn't know where to start. Were it 2007, I'd naturally think to myself that using Flash would be the best choice. I'd love to see "breathing" simulated. However, since Flash is on its way out, I'm not sure of a solid solution. With a previous game, I simply used layered .pngs to represent various aspects of the player's body: their armor, the face, the skin color. However, these solutions weren't very dynamic and felt very amateur. I can't go deep into this project feeling like that's an inferior way to present these faces, and I'm certain there's a better way. Can anyone give some suggestion on how to pull this off well?

  Read the article

• Did 12.04 just add multi-touch gesture support mid-release?

  - by adempewolff

  I was reviewing the updates I was about to download today and I noticed that a lot of them had to do with gesture support, noticed that many of these were new installs rather than upgrades. Has 12.04 just added multi-touch gesture support mid-release? If so, what are the capabilities that this adds? Which applications already support these capabilities and can I expect others to add support in the near future? Here are the packages that were installed: Install: libframe6:amd64 (2.2.4-0ubuntu0.12.04.1), libgeis1:amd64 (2.2.9.2-0ubuntu1), libgrail5:amd64 (3.0.6-0ubuntu0.12.04.01, automatic) And here are those that were upgraded (also including many with touch support): Upgrade: libgrip0:amd64 (0.3.4-0ubuntu2~ubuntu12.04.1, 0.3.5-0ubuntu1~12.04.1), eog:amd64 (3.4.2-0ubuntu1, 3.4.2-0ubuntu1.1), ginn:amd64 (0.2.4-0ubuntu1, 0.2.4.1-0ubuntu1) Of which the descriptions for the new installs are, libgeis1: Gesture engine interface support A common API for clients of a systemwide gesture recognition and propagation engine. libframe6: Touch Frame Library This library handles the buildup and synchronization of a set of simultaneous touches. The library is input agnostic, with bindings for mtdev, frame and XI2.1. libgrail5: Gesture Recognition And Instantiation Library This library consists of an interface and tools for handling gesture recognition and gesture instantiation. Applications can use the grail callbacks to receive gesture primitives and raw input events from the underlying kernel device. And the descriptions for the upgraded packages are, ligrip0: provides multitouch gestures to GTK+ apps Libgrip hooks gesture recognition into GTK+ applications. ginn: Gesture Injector: No-GEIS, No-Toolkits A daemon with jinn-like wish-granting capabilities: it gives applications the ability to support a subset of multi-touch gestures without having to integrate GEIS or multi-touch GTK/Qt libs. Adding in a ton of new libraries and upgrading the existing components makes me wonder if 12.04 is meant to start natively supporting gestures other than two finger scroll in the near future. I expected these capabilities to be introduced soon but I thought that they would only be rolled out in a new release, not as upgrades for an existing release. Anyone have any info about this?

  Read the article

• Critical Patch Update for Oracle Fusion Middleware - CPU October 2013

  - by Daniel Mortimer

  The latest Critical Patch Update (CPU) has been released for Oracle products. Start your reading here Critical Patch Updates, Security Alerts and Third Party Bulletin  This is the home page containing links to all "Critical Patch Updates" released to date, along with sections detailing  Security Alerts  Third Party Bulletin Public Vulnerabilities Fixed Policies Reporting Security Vulnerabilities On this page you will find the link to the Oracle Critical Patch Update Advisory - October 2013 The advisory lists the support documents that cover the patch availability for all Oracle products. For Oracle Fusion Middleware, go to: Patch Set Update and Critical Patch Update October 2013 Availability Document [ID 1571391.1] If you are hit any unexpected errors when applying the CPU patches, check out the known issues documented in these two support documents. Critical Patch Update October 2013 Oracle Fusion Middleware Known Issues  [ID 1571369.1] Critical Patch Update October 2013 Database Known Issues [ID 1571653.1] And lastly, for an informal summary of what the Critical Patch Update fixes, check out the blog posts by "Oracle Software Security Assurance" team October 2013 Critical Patch Update Released

  Read the article

• Random World Generation

  - by Alex Larsen

  I'm making a game like minecraft (although a different idea) but I need a random world generator for a 1024 block wide and 256 block tall map. Basically so far I have a multidimensional array for each layer of blocks (a total of 262,114 blocks). This is the code I have now: Block[,] BlocksInMap = new Block[1024, 256]; public bool IsWorldGenerated = false; Random r = new Random(); private void RunThread() { for (int BH = 0; BH <= 256; BH++) { for (int BW = 0; BW <= 1024; BW++) { Block b = new Block(); if (BH >= 192) { } BlocksInMap[BW, BH] = b; } } IsWorldGenerated = true; } public void GenWorld() { new Thread(new ThreadStart(RunThread)).Start(); } I want to make tunnels and water but the way blocks are set is like this: Block MyBlock = new Block(); MyBlock.BlockType = Block.BlockTypes.Air; How would I manage to connect blocks so the land is not a bunch of floating dirt and stone?

  Read the article

• Why are my 32bit OpenGL libraries pointing to mesa instead of nvidia, and how do I fix it?

  - by Codemonkey

  I have installed Nvidia's drivers on my Ubuntu 13 system, but according to this command (ldconfig -p | grep GL): $ ldconfig -p | grep GL libQtOpenGL.so.4 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libQtOpenGL.so.4 libGLU.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLU.so.1 libGLEWmx.so.1.8 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLEWmx.so.1.8 libGLEW.so.1.8 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLEW.so.1.8 libGLESv2.so.2 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/mesa-egl/libGLESv2.so.2 libGL.so.1 (libc6,x86-64) => /usr/lib/libGL.so.1 libGL.so.1 (libc6) => /usr/lib/i386-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64) => /usr/lib/libGL.so libEGL.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/mesa-egl/libEGL.so.1 The 32bit version of OpenGL is pointing to mesa's libraries instead of nvidia. This causes my Steam games to refuse to launch with the error: Could not find required OpenGL entry point 'glGetError'! Either your video card is unsupported, or your OpenGL driver needs to be updated. Why is this the case? When the nvidia installer asked me if I wanted to install "32bit compatability libraries" (or something like that) I chose yes. How do I fix this? Edit: I just reinstalled the same Nvidia driver, and that apparently removed the 32bit OpenGL driver completely: $ ldconfig -p | grep libGL.so libGL.so.1 (libc6,x86-64) => /usr/lib/libGL.so.1 libGL.so (libc6,x86-64) => /usr/lib/libGL.so Now Steam won't start: You are missing the following 32-bit libraries, and Steam may not run: libGL.so.1 Again, I chose YES when the installer asked me if I wanted to install 32bit libraries. Why are they not installed!?

  Read the article

• Oracle Global HR Cloud Implementation Training Can Help Meet Your Business Needs

  - by HCM-Oracle

  By Jim Vonick A key goal for the deployment of your Oracle Global HR Cloud applications is to accelerate the implementation and adoption of your applications, so that your business can start realizing all of the benefits that this rich solution offers.    Implementation team members need to have the skills and knowledge to ensure a smooth, rapid and successful implementation of your applications. During set-up, you want to optimize the configuration to best meet your business needs. In order to do this you need to understand the foundation and configuration options of your applications, so that decisions can be made during set-up that best align with your business.  To that end product level implementation training is recommended for Oracle Global HR Cloud deployments. Training For Implementation Team Members and Consultants Fusion Applications: HCM Security: Learn how to implement security for Oracle Fusion HCM applications by creating and customizing roles. You'll learn how to create security profiles to restrict data access, provision roles to users, create and manage user accounts, and verify security setup. Fusion Applications: HCM Global Human Resources: Learn how to set up your enterprise and workforce structures, how to perform functional tasks, and how to configure security for Global Human Resources data. Fusion Applications: HCM Compensation: Learn how to implement, configure, and use Oracle Fusion Compensation to manage base pay, individual compensation, workforce compensation, and total compensation statements. Fusion Applications: HCM Benefits: This course teaches you to implement, configure and manage Oracle Fusion Benefits, including how to implement benefit plans and programs.  Fusion Applications: HCM Payroll Implementation (US): This course provides implementation training for payroll managers or payroll administrators. Learn how to process payroll to ensure accurate setup results.  Learn More: See all Fusion HCM Training Jim Vonick is a Senior Product Manager with Oracle University focusing on training for Oracle Applications and Industry Solutions.

  Read the article

• disk space worngly displayed after installing LVM disk

  - by Ubuntuser

  I installed ubuntu server using LVM partitioning on a 1 TB hard disk. However, after installation, i can only see 10 Gig space here is the fidsk output ` # fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00041507 Device Boot Start End Blocks Id System /dev/sda1 * 1 10 71680 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 10 121602 976689152 8e Linux LVM Disk /dev/dm-0: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table You have new mail in /var/mail/root and df -h output df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system-root 9.9G 6.6G 2.8G 71% / devtmpfs 1.9G 232K 1.9G 1% /dev tmpfs 1.9G 4.0K 1.9G 1% /dev/shm /dev/sda1 68M 22M 43M 34% /boot tmpfs 6.0G 0 6.0G 0% /var/spool/asterisk/monitor You have new mail in /var/mail/root ` any way to increase this space without reisntalling?

  Read the article

• 12.04 Wi-Fi not working correctly with Intel Pro/Wireless 3945ABG

  - by Jerel

  This is a very strange problem. The only time the Wi-Fi works is when I have the wired connection connected. I have a Dell 6400/e1505 with the Broadcom BCM 4401-B0 internal NIC, and the Intel Pro/Wireless 3945ABG Wi-Fi adapter. I was on 10.0.4 LTS before, and I remember having to screw around to get the Wi-Fi to work, but that was years ago, and now it's acting even stranger than it did back then. If I boot up with the wire connected, the Wi-Fi starts up. If I boot up without the wire connected, the Wi-Fi won't start at all. If after booting with the wire connected, and the Wi-Fi starts up, I then disable the wireless, the wired connection works fine. Without the wire connected, dmesg shows the iwl3945 driver loading and starting with no errors, and the wireless adapter activated. Running rfkill list shows no blocks, but there is no connection to my Wi-Fi. Help! I am more confused than a chameleon in a bag of Skittles.

  Read the article

• The Oracle MDM Portfolio & Strategy Session - It All Comes Down to Master Data

  - by Mala Narasimharajan

   By Narayana Machiraju We are less than a week now from the start of Oracle Open World 2012 and I would like to introduce you all to one of the most awaited MDM strategy sessions this year titled “What’s there to Know about Oracle’s Master Data Management Portfolio and Roadmap?”. Manouj Tahiliani, Senior Director of MDM Product Strategy provides you a complete picture of the Oracle MDM Portfolio, the Product releases, the Strategy and the Roadmaps. Manoj will be discussing Oracle Fusion MDM applications, the first enterprise-grade SaaS MDM product suite. You’ll hear strategies for leveraging MDM and data quality in the enterprise and how you can derive business value by deploying an MDM foundation for strategic initiatives such as customer experience management, product innovation, and financial transformation. And as a bonus, he is also going to discuss the confluence of MDM with emerging technologies such as big data, social, and mobile. The session is co-presented by GEHC and Westpac. Tony Craddock from Westpac is going to share the insights of their MDM Implementation in the lines of Business drivers, data governance, ROI and other important implementation considerations. A reprsentative from GEHC is going to talk about their MDM journey and the multi-domain MDM story. I strongly recommend yo not miss this important session The MDM track at Oracle Open World covers variety of topics related to MDM. In addition to the product management team presenting product updates and roadmap, we have several Customer Panels, Conference sessions and Customer round table sessions featuring a lot of marquee Customers. You can see an overview of MDM sessions here. 

  Read the article

• Hardware compatibility on H97 chipset/hardware support

  - by user3238850

  I am aware that there is documentation about compatibility but it is way out dated. I am also aware that there is a hardware compatibility page on Ubuntu website, but that one is focused on the whole box rather than a single piece of hardware. I have some experience with Linux OS, and some experience playing Ubuntu Server in a virtual machine, but never worked on a machine that lives in the real internet. I am building a home server with an Intel H97 chipset motherboard. I have looked at several models and none of them has Linux in the supported OS category. I have the experience of installing Ubuntu Desktop 14.04 on my 4-years-old lap top, and except for some system errors on start up, there is not too much I can complain about, so I guess I should be fine. However, this time I am going to install Ubuntu Server 14.04 on a relatively new piece of hardware(I went to http://linux-drivers.org/ but found nothing really helpful). For example the ASUS motherboard has M.2 socket and Intel LAN I218V chip, the Gigabyte motherboard has two LAN chips(Intel LAN WGI217V and ATHEROS AR8161-BL3A-R). So I really want to make sure everything will work. Usually I would just trust Ubuntu and buy all hardware I need, but basing on my past experience with the Ubuntu Desktop version on my lap top, I am not so convinced. There is an easily noticeable difference: when the system is idle, the fan runs much more frequently and longer under Ubuntu. This leads to my suspicion that generally hardware will have worse support for Ubuntu, which is no surprising at all but enough for me to put this post here. And as far as I know, some Intel CPU features come with software that usually will not run under Linux. Any help, idea or thoughts would be greatly appreciated!

  Read the article

• How to manage own bots at the server?

  - by Nikolay Kuznetsov

  There is a game server and people can play in game rooms of 2, 3 or 4. When a client connects to server he can send a request specifying a number of people or range he wants to play with. One of this value is valid: {2-4, 2-3, 3-4, 2, 3, 4} So the server maintains 3 separate queues for game room with 2, 3 and 4 people. So we can denote queues as #2, #3 and #4. It work the following way. If a client sends request, 3-4, then two separate request are added to queues #3 and #4. If queue #3 now have 3 requests from different people then game room with 3 players is created, and all other requests from those players are removed from all queues. Right now not many people are online simultaneously, so they apply for a game wait for some time and quit because game does not start in a reasonable time. That's a simple bot for beginning has been developed. So there is a need to patch server code to run a bot, if some one requests a game, but humans are not online. Input: request from human {2-4, 2-3, 3-4, 2, 3, 4} Output: number of bots to run and time to wait for each before connecting, depending on queues state. The problem is that I don't know how to manage bots properly at the server? Example: #3 has 1 request and #4 has 1 request Request from user is {3,4} then server can add one bot to play game with 3 people or two bots to play game of 4. Example: #3 has 1 request and #4 has 2 requests Request from user is {3,4} then in each case just one bot is needed so game with 4 players is more preferrable.

  Read the article

• What is the proper way to install the 3.4 kernel?

  - by Marcelo Ruiz

  Kernel 3.2 has an annoying error for my wireless card (rtl8192se-b) that makes the connection drop and/or prevents the card to make a connection to the wireless router. Dealing with it was very frustrating until I found out the bug was corrected in 3.4. I downloaded: linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb and installed with: sudo dpkg -i * Now the wireless works fine, but I have two problems that cannot solve. The first one is minor: plymouth would not start at all. But if I boot with the 3.2 kernel it works fine. The second one is serious: sometimes the computer won't shut down or reboot. The X server terminates but the computer shows part of my grub background and will stay there forever using 100% of the CPU. I have a Toshiba Qosmio with an Core i7 and nvidia graphic card (using nvidia-current). During one shutdown, I briefly read a message that said that the virtualbox module couldn't be unloaded from the kernel. I tried to solve this by removing and purging virtualbox and installing it back. I don't see the message anymore, but sometimes the computer won't shutdown nor reboot. Am I missing something to properly configure the new kernels? Thanks!

  Read the article

• DropSpace Syncs Android Files to Dropbox

  - by ETC

  DropSpace is a free Android application that fixes the primary issue that plagues the official Dropbox app for Android–the lack of true file synchronization. Grab a copy of DropSpace and start enjoying true file syncing on the go. The official Dropbox app is limited to grabbing files from your Dropbox account or pushing files from your phone to your Dropbox account. Actual file synchronization, this manual push/pull model aside, is nowhere to be found. DropSpace fills that gap by enabling file synchronization between your SD card directories and your Dropbox directories. It’s packed with handy features including restricting file syncing to Wi-Fi connection only (great if you don’t want to chew up your very limited data plan) as well as numerous toggles for various settings like whether it should delete remote files if the local file is deleted, how often it should run the sync service, and more. Hit up the link below to grab a copy and take it for a test drive. DropSpace is free and works wherever Android does; Dropbox account required. DropSpace [via Addictive Tips] Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 Access the Options for Your Favorite Extensions Easier in Firefox Don’t Sleep Keeps Your Windows Machine Awake DropSpace Syncs Android Files to Dropbox Field of Poppies Wallpaper The History Of Operating Systems [Infographic] DriveSafe.ly Reads Your Text Messages Aloud

  Read the article

• Spotlight on an ACE: Edwin Biemond

  - by jeckels

  Edwin Biemond is an active member of the ACE community, having worked with Oracle's development tooling and database technologies since 1997. Since then, Edwin has become an expert in many of Oracle's middleware technologies as well, including WebLogic and SOA. In fact, Edwin has become so prolfic that he was named the Java Developer of the Year in 2009. Edwin hails from the Netherlands, where he is an architect at the company Amis, and is also a co-author of the OSB Development Cookbook. He's a proven expert in ADF, JSF, messaging (Edifact / ebXML), Enterprise Service Bus, web services and tuning of application servers and databases. Recently, Edwin posted a blog on the road map of WebLogic 12c, going over salient features and what the future looks like for Fusion Middleware and the Application Server areas - it's well worth a read, so give it a look. A snippet: WebLogic 12.1.3 will be the first version for many FMW 12c products like Oracle SOA Suite 12c and probably come in one big jar. 12.1.3 & 12.1.4 will add extra features and improvements to Elastic JMS & Dynamic Clusters. Elastic JMS in 12.1.3 will support Server Migration so you can’t lose any JMS messages. In 12.1.4, Dynamic Clusters will have support for auto-scaling based on thresholds based on user-defined metrics. WebLogic 12.1.4 will also have an API to control the Dynamic Clusters, this way we can easily program when to stop, start or remove nodes from a dynamic cluster. Further, Edwin is hosting a session on getting your FMW environment up and running in less than 10 minutes using popular tooling to configure and manage the many FMW components you have in your technology stack. Register now for this virtual developer day to see more. We thank Edwin for his commitment to being an ACE, his work on his blog, his social media publishing and his overall commitment to helping other technologists be even more successful with Oracle products. Follow Edwin on his blog, Twitter, Facebook, LinkedIn, or read his ACE Profile

  Read the article

• Ubuntu impossible to install: "unable to find a medium containing a live filesystem"

  - by Lorenzo

  Yes, I have read questions and answers with similar titles for this issue, which prevented me from installing Ubuntu for several MONTHS now, trying to figure it out. I have a MacBookPro with triple partition (one for Mac Snow Leopard, one for Windows 7, one for Linux) created with reFIT firmware (not BootCamp). I set up the system according to these instructions for reFIT: http://lifehacker.com/5531037/how-to-triple+boot-your-mac-with-windows-and-linux-no-boot-camp-required Now. There is a free partition ready to accept Linux into its arms, but Linux does not want to participate. Most answers to the issue "unable to find a medium containing a live filesystem" point to changing the BIOS booting system (which I don't know how to do, especially using this reFIT booting system), and to changing the socket of the USB (which does not concern me, since I am using a CD, actually I tried with a CD, then with a DVD, since a blank CD is only 700MB while the iso image file of Ubuntu is about 731MB). Anyway. This is what happens: I am in the Mac system (using the Mac partition) I insert the DVD with the burned image of Ubuntu (yes I have tried burning it again and agin on both CD and DVD blank discs). I restart the computer. When reFIT loads, I hold down the ALT key until the CD image appears. I select it, and hit Enter. A small Ubuntu icon appears at the bottom of the screen. Then a Ubuntu sign appears in the middle of the screen with small dots underneath, lighting up progressively over and over to indicate it's loading. Then everything turns black and the following message appears, at the end of a few lines of text: "unable to find medium with live file system". Please provide very practical suggestions on what to do to an unexperienced wannabe Ubuntu very patient user. Please start by saying how do I access the BIOS setup from reFIT bootup, and exactly what and why I need to try and change. (Will this mess up my reFIT bootup?) And anything else I need to do to finally be able to install Ubuntu. Thanks

  Read the article

• SQLAuthority News – #SQLPASS 2012 Schedule – Where can You Find Me

  - by pinaldave

  Yesterday I wrote about my memory lane with SQLPASS. It has been a fantastic experience and I am very confident that this year the same excellent experience is going to be repeated. Before I start for #SQLPASS every year, I plan where I want to be and what I will be doing. As I travel from India to attend this event (22+ hours flying time and door to door travel time around 36 hours), it is very crucial that I plan things in advance. This year here is my quick note where I will be during the SQLPASS event. If you can stop with me, I would like to meet you, shake your hand and will archive memories as a photograph. Tuesday, November 6, 2012 6:30pm-8:00pm PASS Summit 2012 Welcome Reception Wednesday, November 7, 2012 12pm-1pm – Book Signing at Exhibit Hall Joes Pros booth#117 (FREE BOOK) 5:30pm-6:30pm – Idera Reception at Fox Sports Grill 7pm-8pm - Embarcadero Booth Book Signing (FREE BOOK) 8pm onwards – Exhibitor Reception Thursday, November 8, 2012 12pm-1pm - Embarcadero Booth Book Signing (FREE BOOK) 7pm-10pm - Community Appreciation Party Friday, November 9, 2012 12pm-1pm - Joes 2 Pros Book Signing at Exhibit Hall Joes Pros booth#117 11:30pm-1pm - Birds of a Feather Luncheon Rest of the Time! Exhibition Hall Joes 2 Pros Booth #117. Stop by for the goodies! Lots of people have already sent me email asking if we can meet for a cup of coffee to discuss SQL. Absolutely! I like cafe mocha with skim milk and whip cream and I do not get tired of it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

  - by simpleton

  I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

  Read the article

• No GUI boot; startx error, I suspect no filesystem corruption.

  - by Dharmaj Soni

  Till yesterday, my Ubuntu 9.10 was working fine. I had watched a movie using vlc. I had also charged my ipod using the laptop. Today, when I started it, I automatically booted into command line. There seems to be no filesystem corruption etc as I can view/open (text) files. Before the CLI appeared, the screen blinked with a cursor, then the white Ubuntu logo flashed, and then I got the CLI login prompt. After logging in, if I try startx, to start gnome, I get the following error after a few seconds: giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error* The same error comes up, even if I use sudo, or if I change my directory to '/' before using startx, and also when, from the grub, using the recovery mode option to load into CLI, and then trying startx. On trying command 'xinit', I get "Server error" Also, on trying GDM, I get 2 errors. I cannot connect to the internet in this state. Thanks for any help. I am using Dell Inspiron 1440, no special graphics card.

  Read the article

• "Don't do programming after a few years of starting career" Is this a fair advice?

  - by Muhammad Yasir

  I am a little experienced developer having around 5 years experience in PHP and somewhat less in Java, C# and trying to learn some Python now a days. Since the start of my career as a programmer I have been told every now and then by fellow programmers that programming is suitable for a few early years of carrier (most of them take it as 5 years) and that one must change the direction after it. The reason they present is that headaches and pressures associated with programming. They also say that programmers are less social and don't usually like to give time to their families etc. and specially "Oh come on, you can not do programming in your entire life!" I am somewhat confused here and need to ask others about it. If I leave programming then what do I do?! I guess teaching may be a good option in this case but it will require to first earn a PhD degree perhaps. It may also be noteworthy that in my country (Pakistan) the life of a programmer is not very good in that normally they must give 2-3 extra hours in office to accomplish urgent programming tasks. I have a sense that situation is somewhat similar in other countries and regions as well. So the question is, do you think it is a fair advice to change career from programming to something else after spending 5 years in this field? Thanks for sharing thoughts!

  Read the article

• Two JavaFX Community Rock Stars Join Oracle

  - by Tori Wieldt

  from Sharat Chander, Director - Java Technology Outreach: These past 24+ months have proved momentous for Oracle's stewardship of Java.  A little over 2 years ago when Oracle completed its acquisition of Sun, a lot of community speculation arose regarding Oracle's Java commitment.  Whether the fears and concerns were legitimate or not, the only way to emphatically demonstrate Oracle's seriousness with moving Java forward was through positive action.  In 2010, Oracle committed to putting Java back on schedule whereby large gaps between release trains would be a thing of the past.  And in 2011, that promise came true.  With the 2011 summer release of JDK 7, the Java ecosystem now had a version brought up to date.  And then in the fall of 2011, JavaFX 2.0 righted the JavaFX ship making rich internet applications a reality. Similar progress between Oracle and the Java community continues to blossom.  New-found relationship investments between Oracle and Java User Groups are taking root.  Greater participation and content execution by the Java community in JavaOne is steadily increasing.  The road ahead is lit with bright lights and opportunities. And now there's more good news to share.  As of April 2nd, two recognized JavaFX technology luminaries and "rock stars" speakers from the Java community are joining Oracle on a new journey. We're proud to have both Jim Weaver and Stephen Chin joining Oracle's Java Evangelist Team.  You'll start to see them involved in many community facing activities where their JavaFX expertise and passion will shine.  Stay tuned! Welcome @JavaFXpert and @SteveonJava !

  Read the article

• Why is my root filesystem always scanned at boot?

  - by luri

  I always have a pause at boot saying my filesystems are being checked (with a "press C to cancel" note, too). Actually (seeing boot.log) I think it's the / fs, which is located at /dev/sdb5 Several questions altoghether, here (hope this does not break any rule): Is this normal? Can I (or even should I) prevent this anyhow? According to boot.log (below) the fs does not seem to be 'clean', or, at least, it's in an state or condition that makes fsck always can it for errors for a while (just a few seconds). How can I fix it? Edit: This is my boot.log: fsck desde util-linux-ng 2.17.2 udevd[515]: can not read '/etc/udev/rules.d/z80_user.rules' /dev/sdb5: 249045/32841728 ficheros (0.3% no contiguos), 20488485/131338752 bloques init: ureadahead-other main process (1111) terminated with status 4 init: ureadahead-other main process (1116) terminated with status 4 Password: * Starting AppArmor profiles [160G Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox [154G[ OK ] * Setting sensors limits [160G [154G[ OK ] And this is dumpe2fs results for the filesystem being checked (well, the relevant part of the log): Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32841728 Block count: 131338752 Reserved block count: 6566937 Free blocks: 110850356 Free inodes: 32592701 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Dec 10 19:44:15 2010 Last mount time: Mon Feb 14 17:00:02 2011 Last write time: Mon Feb 14 16:59:45 2011 Mount count: 1 Maximum mount count: 33 Last checked: Mon Feb 14 16:59:45 2011 Check interval: 15552000 (6 months) Next check after: Sat Aug 13 17:59:45 2011 Lifetime writes: 331 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28049496 Default directory hash: half_md4 Directory Hash Seed: d3d24459-514b-4413-b840-e970b766095b Journal backup: inode blocks Journal features: journal_incompat_revoke Tamaño de fichero de transacciones: 128M Journal length: 32768 Journal sequence: 0x0005e0c4 Journal start: 1 This is the relevant (at least I think this is the fs being checked) line in fstab: #Entry for /dev/sdb5 : UUID=42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 / ext4 errors=remount-ro 0 1

  Read the article

< Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >