Search Results

Search found 21004 results on 841 pages for 'assembly load'.

Page 656/841 | < Previous Page | 652 653 654 655 656 657 658 659 660 661 662 663  | Next Page >

  • There's no sound on Ubuntu with an Intel HDA onboard chip and Realtek ALC1200 codec.

    - by Hanno Fietz
    For a while now, my sound has not been working in Ubuntu. It used to play OK, but after some upgrade (might have been distro upgrade to 9.10), it stopped working. I'm currently running 10.04 on an amd64 architecture. I'm using the builtin audio on a Foxconn motherboard, it's an ATI / Intel HDA chip with an Azalia controller, apparently it's using the Realtek ALC1200 codec. All the gory details here. I found a nice sound troubleshooting tutorial here, which is well-written and pretty extensive, however, I fail to look up the supported "models" for my soundcard. The troubleshooting page says to look for a section giving the codec used by your soundcard, which looks like this for me: !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC1200 Then, I'm supposed to lookup the models for that codec in the file Documentation/ALSA-Configuration.txt in the appropriate directory of ALSA's git repository. Mine actually pointed me to a separate file, Documentation/HD-Audio-Models.txt, which, for my driver version is located here and contains no section related to ALC1200 codecs. I tried putting the driver options probe-mask=1 and model=auto in a config file for modprobe, as suggested elsewhere, but this just lead to snd-hda-intel not able to load at all anymore. I also tried installing the linux-backports-modules-alsa package for my kernel, because the description sounded promising, but that didn't change anything, either.

    Read the article

  • File permissions question

    - by Matthew Robert Keable
    I just switched my site's server from Windows to Linux, and am finally able to control file permissions from my ftp. So, seeing that all permissions were 705 by default (and not wanting just anyone to have permission to execute), I went and changed everything to 744. Now, gif and jpg links don't work, pdf download links don't work, php links don't load, and mov files don't play. Conversely, all html files work perfectly. Setting things back doesn't seem to help. Even setting to 777 gets me nowhere. Any ideas on what might be going wrong? I've been googling file permissions all day (solved that problem with the Windows-Linux switch, which has bred a new problem), and I don't think anything I can find has escaped my attention. The site: absis-minas.com Go easy on a n00b. I took up learning php out of interest, and wound up delving into server management issues due to a very simple line of code not working the way it was supposed to. Thanks!

    Read the article

  • Reducing video mode switching during Linux boot

    - by Zack
    When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

    Read the article

  • Slow boot for OS and external devices

    - by Derek Van Cuyk
    I have been having this problem intermittently but as of yesterday, it has become more consistent. It originally started when I rebooted my PC at home and the OS (Windows 8) sat in a loop appearing to do nothing while loading. I figured since this was a new installation, that something may have just become corrupted and I decided to reinstall. So I tried to boot off of the thumb drive which had the installation iso and encountered pretty much the same issue. Same with the DVD drive. So, I rebooted once again and left it to load the entire night just to see if it ever would and sure enough this morning, Windows had finally loaded. Authentication had the same roblem albeit not quite as long (took about 5 minutes to authenticate). However, once I was in, everything appeared to be working fine and as quick as normal with the exception of when I tried to scan the C drive for any errors, which ran unbearably slow (45 minutes and before I left for work and was not finished scanning a 64GB SSD drive). I mention that I have had this issue but never when loading the OS. Before it occurred when trying to install windows 7 from a different DVD drive than the one I have now. It took me about 3 hours to do it since I had to wait sometimes 30+ min for each step to finish processing. Does anyone have an idea as to what can cause this? I am assuming it is the motherboard since it is responsible for communication with all the devices I'm having issues with but I cannot find anyone else who has had a problem like this and don't want to drop more money on a MB if it isn't the problem. Hardware: Motherboard: Asus M4A78T-E Socket AM3/ AMD 790GX/ Hybrid CrossFireX Hard Drive: Kingston SSDNow V+180 64GB Micro SATA II 3GB/S 1.8 Inch Solid State Drive SVP180S2/64G Optical Drive: Samsung Blu-Ray Combo Internal 12XReadable and DVD-Writable Drive with Lightscribe SH-B123L/BSBP Thanks, Derek

    Read the article

  • Troubleshooting loss of network connectivity in Windows 2003 - What else to check?

    - by Benny
    We are facing a weird problem in our data center. Our Backup server (running EMC Networker) loses network connection every alternate day around 3:00 AM (Backup schedule starts at midnight). After 2 hours of outage, the network connectivity recovers automatically and back to normal. What we observed: It is unlikely to be network issue, since it is directly connected to server farm switch (layer 2 connection without any intermediate hops). Further, the server is connected to two different switches for Load balancing using Broadcomm Teaming. a) If it were a switch related issue it is unlikely that both the network ports go down, since they are connected to different switch. b) A possibility Vlan wide issue is also ruled out since other devices in the same Vlan are fine. c) Switch interface status is always up. But there are lot of packet drops during the outage period - Can be attributed to high interface utilization of the backup server (near 100%) d) Connectivity is restored without any change on network. Next suspect is resource utilization on Windows server. Both CPU and Memory have rarely exceeded 80%, but NIC card utilization is alarmingly high (near 100%) Not really sure how to investigate this?

    Read the article

  • Prevent outgoing traffic unless OpenVPN connection is active using pf.conf on Mac OS X

    - by Nick
    I've been able to deny all connections to external networks unless my OpenVPN connection is active using pf.conf. However, I lose Wi-Fi connectivity if the connection is broken by closing and opening the laptop lid or toggling Wi-Fi off and on again. I'm on Mac OS 10.8.1. I connect to the Web via Wi-Fi (from varying locations, including Internet cafés). The OpenVPN connection is set up with Viscosity. I have the following packet filter rules set up in /etc/pf.conf # Deny all packets unless they pass through the OpenVPN connection wifi=en1 vpn=tun0 block all set skip on lo pass on $wifi proto udp to [OpenVPN server IP address] port 443 pass on $vpn I start the packet filter service with sudo pfctl -e and load the new rules with sudo pfctl -f /etc/pf.conf. I have also edited /System/Library/LaunchDaemons/com.apple.pfctl.plist and changed the line <string>-f</string> to read <string>-ef</string> so that the packet filter launches at system startup. This all seems to works great at first: applications can only connect to the web if the OpenVPN connection is active, so I'm never leaking data over an insecure connection. But, if I close and reopen my laptop lid or turn Wi-Fi off and on again, the Wi-Fi connection is lost, and I see an exclamation mark in the Wi-Fi icon in the status bar. Clicking the Wi-Fi icon shows an "Alert: No Internet connection" message: To regain the connection, I have to disconnect and reconnect Wi-Fi, sometimes five or six times, before the "Alert: No Internet connection" message disappears and I'm able to open the VPN connection again. Other times, the Wi-Fi alert disappears of its own accord, the exclamation mark clears, and I'm able to connect again. Either way, it can take five minutes or more to get a connection again, which can be frustrating. Why does Wi-Fi report "No internet connection" after losing connectivity, and how can I diagnose this issue and fix it?

    Read the article

  • Logstash agent doesn't run as a daemon on MAC OS X 10.9.1

    - by user329324
    I need to run the logstash agent as a Daemon on an MAC OS X System whenever the system boots up terminal: /usr/local/logstash/bin/logstash agent -f /usr/local/etc/cvlog.conf Per terminal the program is working succesfully but as an daemon it doesn't start. My com.bcd.logstash.plist <plist version="1.0"> <dict> <key>Label</key> <string>com.bcd.logstash</string> <key>KeepAlive</key> <dict> <key>SuccessfulExit</key> </false> </dict> <key>ProgramArguments</key> <array> <string>/usr/local/logstash/bin/logstash</string> <string>agent</string> <string>-f</string> <string>/usr/local/etc/cvlog.conf</string> </array> <key>RunAtLoad</key> </true> </dict> </plist> I start with: launchtl load /Library/LaunchDaemons/com.bcd.logstash.plist Syslog Error Message com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:1 com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:143 What's wrong with my plist?

    Read the article

  • Zenoss No space left on device Error

    - by Pastelinux
    Site Error An error was encountered while publishing this resource. Sorry, a site error occurred. Traceback (innermost last): Module ZPublisher.Publish, line 231, in publish_module_standard Module ZPublisher.Publish, line 165, in publish Module Zope2.App.startup, line 211, in __call__ Module Products.ZenUI3.browser, line 105, in __call__ Module Products.Five.browser.pagetemplatefile, line 60, in __call__ Module zope.pagetemplate.pagetemplate, line 115, in pt_render Module zope.tal.talinterpreter, line 271, in __call__ Module zope.tal.talinterpreter, line 343, in interpret Module zope.tal.talinterpreter, line 858, in do_defineMacro Module zope.tal.talinterpreter, line 343, in interpret Module zope.tal.talinterpreter, line 533, in do_optTag_tal Module zope.tal.talinterpreter, line 518, in do_optTag Module zope.tal.talinterpreter, line 513, in no_tag Module zope.tal.talinterpreter, line 343, in interpret Module zope.tal.talinterpreter, line 620, in do_insertText_tal Module Products.PageTemplates.Expressions, line 203, in evaluateText Module Products.PageTemplates.Expressions, line 222, in _handleText Module zope.component._api, line 174, in queryUtility Module zope.component.registry, line 165, in queryUtility Module ZODB.Connection, line 834, in setstate Module ZODB.Connection, line 884, in _setstate Module ZEO.ClientStorage, line 815, in load Module ZEO.cache, line 143, in call Module ZEO.cache, line 607, in store IOError: [Errno 28] No space left on device Went in to check my server through zenoss today and it looks like somehow my server is full. Which when i look at my server its only 85% full: unclebob:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/unclebob--vg0-unclebob--root 1.9G 1.5G 335M 82% / tmpfs 471M 0 471M 0% /lib/init/rw udev 10M 820K 9.2M 9% /dev tmpfs 471M 0 471M 0% /dev/shm overflow 1.0M 1.0M 0 100% /tmp /dev/hde1 942M 36M 859M 5% /boot unclebob:/tmp# df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/unclebob--vg0-unclebob--root 121920 54844 67076 45% / tmpfs 120489 3 120486 1% /lib/init/rw udev 120489 1520 118969 2% /dev tmpfs 120489 1 120488 1% /dev/shm overflow 120489 14 120475 1% /tmp /dev/hde1 61312 33 61279 1% /boot It looks like theres these two files: .ICE-unix/ .X11-unix/ They had been hidden. I'll remove those. Any idea upon what they maybe? Any ideas on a fix? Probably has something to do with Zenoss

    Read the article

  • Formatted C: from Windows 7 setup, now it won't even install

    - by ocurro
    Help, I'm so confused. I did more or less what's been described here: I formatted Vista and installed Windows 7 over it. Problem is that I'm now unable to boot (...) [1] I'm installing Seven on top of Vista on ACER AS1410 Notebook When it comes to the part where I choose where to install, I pick the partition labeled C: but instead of keeping windows.old files (what would I want them for?) I choose to go and carelessly format the partition (my bad). It shows me this error: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information Now the only option is "Load Driver". i have tried installing every single one from ACER website, none of them are useful. I even flashed orig. BIOS. I've tried going back and choose "Repair" like in the picture:[2] but I only get an error: "Failed to save startup options" I think this is weird, what else can I do? [1] superuser.com/questions/117076/formatting-of-an-xp-vista-dual-boot-machine-now-unable-to-boot-up-xp [2] www.howtogeek.com/wp-content/uploads/2007/08/image51.png

    Read the article

  • Proper way to use hiera with puppetlabs-spec-helper?

    - by Lee Lowder
    I am trying to write some rspec tests for my modules. Most of them now use hiera. I have a .fixures.yml: fixtures: repositories: stdlib: https://github.com/puppetlabs/puppetlabs-stdlib.git hiera-puppet: https://github.com/puppetlabs/hiera-puppet.git symlinks: mongodb: "#{source_dir}" and a spec/classes/mongodb_spec.rb: require 'spec_helper' describe 'mongodb', :type => 'class' do context "On an Ubuntu install, admin and single user" do let :facts do { :osfamily => 'Debian', :operatingsystem => 'Ubuntu', :operatingsystemrelease => '12.04' } end it { should contain_user('XXXX').with( { 'uid' => '***' } ) should contain_group('XXXX').with( { 'gid' => '***' } ) should contain_package('mongodb').with( { 'name' => 'mongodb' } ) should contain_service('mongodb').with( { 'name' => 'mongodb' } ) } end end but when I run the spec test, I get: # rake spec /usr/bin/ruby1.8 -S rspec spec/classes/mongodb_spec.rb --color F Failures: 1) mongodb On an Ubuntu install, admin and single user Failure/Error: should contain_user('XXXX').with( { 'uid' => '***' } ) LoadError: no such file to load -- hiera_puppet # ./spec/fixtures/modules/hiera-puppet/lib/puppet/parser/functions/hiera.rb:3:in `function_hiera' # ./spec/classes/mongodb_spec.rb:15 Finished in 0.05415 seconds 1 example, 1 failure Failed examples: rspec ./spec/classes/mongodb_spec.rb:14 # mongodb On an Ubuntu install, admin and single user rake aborted! /usr/bin/ruby1.8 -S rspec spec/classes/mongodb_spec.rb --color failed Tasks: TOP => spec_standalone (See full trace by running task with --trace) Module spec testing is relatively new, as is hiera. So far I have been unable to find any suitable solutions. (the back and forth on puppet-dev was interesting, but not helpful). What changes do I need to make to get this to work? Installing puppet from a gem and hacking on rubylib isn't a viable solution due to corporate policy. I am using Ubuntu 12.04 LTS + Puppet 2.7.17 + hiera 0.3.0.

    Read the article

  • Error when starting .Net-Application from ThinApp-Application

    - by user50209
    one of our customers uses SAP through VMWare ThinApp. In SAP there is a button that launches an .Net application from a server. When starting the .Net-application directly, there is no error. If the user tries to start the application by clicking the button in the ThinApp-Application, it displays the following errors: Microsoft Visual C++ Runtime Library R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. After clicking "OK" it displays: Microsoft Visual C++ Runtime Library Runtime Error! R6030 - CRT not initialized So, does the customer have to install some components into his ThinApp (if yes, which?) to get things working? Regards, inno ----- [EDIT] ----- @Sean: It's installed the following way: The .exe of the .Net-Application is on a mapped drive on a server. All clients have the requirements installed (.Net-framework for example) and start the .exe from the mapped drive. The ThinApp-Application tries to start this application and throws the mentioned exceptions. AFAIK there are no entry points for this application configured. What I should also mention is: The .Net-Application crashes during execution. That means, we have a debug mode implemented that shows what the application is doing. The application shows what it's doing and after some steps it crashes. The interesting point is: It's a .Net-application, not a C++ Application.

    Read the article

  • Booting Debian5 (Lenny) on 2.6.16 Kernel

    - by bk
    Due to a proprietary kernel module that I don't have the source to and is very picky about what kernel versions it will load into (even with modprobe --f), I find myself in need of running a 2.6.16.XX kernel on my Debian5 machine. The machine boots fine with the 2.6.26-2 stock kernel, and I have successfully build and booted 2.6.26 and 2.6.31 based kernels by making a .deb and the ndoing dpkg -i. However, when I do the same approach for 2.6.16, the kernel hangs at boot. I'm testing this in a VMWare image, so I don't think its an issue of newer hardware not supported by the older kernel. For a working kernel, at boot I get: Uncompressing Linux.. OK booting the kernel Loading, please wait... mdadm: No devices listed in the conf file were found kinit name_to_dev_t /dev/hda5 (dev5,3) ... With 2.6.16.60, I never get the kinit message. It hangs after the mdadm line. There are no mdadm arrays on this machine, so I doubt its an issue inside the mdadm stuff, which is supposed to just error out as it does in the 2.6.26 case above, but for some reason I'm getting stuck getting into kinit. I've been banging my head against this wall so I'm very open to suggestions on how to go about troubleshooting this.

    Read the article

  • VPN issue: SSTP Service service started and then stopped

    - by Ampersand
    When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

    Read the article

  • Chrome browser completely messing with network?

    - by kiasecto
    I have a bizare problem with Google Chrome on a intel core i5 running windows 7 32bit. Whenever chrome is installed, access to other computers in the home group becomes really slow - such as opening shares. Its becomes really slow to resolve windows names. Something goes hay-wire with the local network - pining local machines which is usually 0mS pings I get random timeouts and random successes. Whenever I try to load a local address inside of chrome (including localhost, 192.168.0.1 etc) - it always says something in the status bar about resolving proxy and times out after about 5 seconds, then seems to work fine. If I go to settings inside of chrome, it just brings up the internet explorer connection settings, where I have not set any proxy settings. One I uninstall chrome, all these problems go away. Network shares and name resolvings work instantly, pings to any machines never have a problem. Localhost and other network IP address work fine in all other browsers. Anyone heard of this problem before and know what it might be? I even tried re-installing winodws 7 and the problem came straight back when chrome was loaded on again.

    Read the article

  • One USB flash drive to rule them all

    - by Chris
    Yesterday I purchased a 32GB USB flash drive. I have a myrid of systems in my home, and would like to have one flash drive with setup files for all the various systems throughout the house. I kept the Fat 32 filesystem on the drive, as I figured that is probably the most universal. I then made the partition bootable using fdisk. I then copied the Windows 7 setup files to the drive. I then installed grub 2 (1.98) onto the drive using backtrack 5. I was then able to load the windows 7 setup / install from the flash drive on an older BIOS type motherboard. Now I would like to know how to get this to work on my MacBook Pro 8,2 with still retaining support for legacy computers. Is this possible, or is this just a pipe dream. I plan on getting OS X on the drive, gparted, and OS X86 on the drive when all is said and done. I've done various google searches but really haven't found a guide on how to setup a swiss army usb flash drive.

    Read the article

  • flowchart for debugging a slow/unresponsive server

    - by davidosomething
    So the server is slow: Roll back to the previous known working build - Success? Code problem - Fail? Go on. Ping ip address - Success? maybe a DNS problem, go on. - Fail? Server or connection problem, go on. Ping and tracert your domain.com from inside your network - previous success - fail: DNS problem - success? go on. - previous fail and: - Fail? Go on, could be you or network. - Success? Go on. Try it from outside your network (http://centralops.net/co/) - Fail? The server's network connection sucks. - Success? If inside network was fail, your network sucks. Check the server load: CPU/RAM usage. Is it overloaded? - Yes. Who's the culprit? Kill some processes/reboot. - No? Go on. what other steps should i add?

    Read the article

  • Black Screen on Logon (windows 7 home premium)

    - by Blacknight334
    i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

    Read the article

  • Rebuild Fedora 19 ISO adding Kickstart for USB install

    - by dooffas
    I am attempting to edit a Fedora 19 DVD ISO to add a kickstart file. I then need this ISO burnt to a USB stick for instillation. The error I get when booting is Warning: Could not boot. Warning: /dev/root does not exist To try and determine which part of the process is failing I have broken the process down in to separate stages. Step 1: Burn the original ISO "Fedora-19-x86_64-DVD.iso" (Available - here) to a pendrive and see if that will install. dd if=/path/to/iso of=/dev/sdc Burning this image was successful and it installed without issue. Step 2: Exctract the ISO, repackage it and burn it to a pendrive and see if that will install. PLEASE NOTE: The final command in this section has been broken down in to multiple lines for ease of reading, in fact it was run as a single command on one line. mkdir -p /mnt/linux mount -o loop /tmp/linux-install.iso /mnt/linux cd /mnt/ tar -cvf - linux | (cd /var/tmp/ && tar -xf - ) cd /var/tmp/linux xorriso -as mkisofs -R -J -V "NewFedoraImage" -o ouput/file.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -isohybrid-mbr /usr/share/syslinux/isohdpfx.bin . This iso was then burnt to a pendrive as before. dd if=/path/to/iso of=/dev/sdc This ISO burnt to the pen drive with no problem and will boot. I then see the fedora options screen. After choosing either "Install Fedora 19" or "Test this media & install Fedora 19" I then receive the errors highlighted above. This means the kickstart file is not to blame, but repackaging the ISO. Is there something I am missing in the repackaging process? Any input would be great! NOTE: If it is of any help, I attempted Step 2 with an Ubuntu server ISO and the process was successful.

    Read the article

  • smbclient timing out

    - by Sam Lee
    I am trying to set up a Samba share on a Centos machine. I want to connect to this server using smbclient on OS X. Here is what happens: > smbclient -L X.X.X.X timeout connecting to X.X.X.X:445 timeout connecting to X.X.X.X:139 Error connecting to X.X.X.X (Operation already in progress) Connection to X.X.X.X failed What could be going wrong? Here is my iptables dump on the Centos machine (the server): > iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 REJECT all -- 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3000 And finally, my smb.conf: [global] workgroup = workgroup security = SHARE load printers = No default service = global path = /home available = No encrypt passwords = yes [share] writeable = yes admin users = myusername path = /home/myhome/ force user = root valid users = myusername public = yes available = yes

    Read the article

  • What would cause my Windows machine to seize?

    - by Coltin
    I run Windows XP SP2 on a Desktop I built (I know that doesn't provide much, but I can't say "on a Dell X103938R" or something). It has 'seized' about 7 times in its year and a half life. Everything freezes. I can't move the mouse cursor and the keyboard seems unresponsive. I can turn the monitor on and off and it will hold the last image. The light for the mouse is responsive if I move it. The keyboard lights change when pressed (cap locks, etc). I've waited upto ten minutes for a change, nothing. I haven't connected any activity to the seizing. It's happened when all I was "running" were fullscreen programs (games), just checking email, or once when I was sitting at my desktop (I was reading a book and when I tried to use the mouse, nothing). I've never been able to figure it out. I have to hard reset, and then its fine. It doesn't file system check or anything (not sure if Windows does that). No error when I load up the computer, nothing. If I had uTorrent open, it will have to recheck the torrent files to make sure they weren't corrupted though. (It's not always open when it seizes either). I'm using an AMD Athlon 5400+ with a NVidia GeForce 8600 GT, if that helps. I'm using two hard drives, 500Gb Wester Digital with a 1Tb Hitachi.

    Read the article

  • Alternative software for Pinnacle PCTV 100e

    - by Stijn Sanders
    I have a Pinnacle PCTV 100e external USB cable television receiver. I've been using Pinnacle's software that came with the card (TVCenter Pro) to record things at given times. Things I don't like is an extremely high CPU load, and that it doesn't seem to halt the screensaver from running when watching in full screen. Also, I was away the last two weeks, and the schedules went terribly bust. Some items were recorded hours before or after the actual scheduled time (and now I missed some shows), and some recurring schedules weren't converted into the next occurrence correctly! Is there good alternative software that would work with my PCTV 100e? (Preferalby cheap or free) I've tried VLC Player, which gets video, but no audio. I've tried MediaPortal, which crashes when trying to scan for channels. When I select a channel manually, the stored mpg has big errors in encoding and is also missing audio. There's VirtualDub, but that doesn't have ready-made scheduled-recording options. This I can conjure some scheduled scripts for, but I've noticed the sync gets awfully wrong after some time. I've tried Windows Media Center, but it doesn't seem to support the PCTV 100e.

    Read the article

  • Windows XP Setup Fails to Recognize USB Floppy after formatting AHCI disk

    - by Strahn
    I am attempting to install Windows XP Professional x64 onto a HP EliteBook 8540w. I have downloaded both the latest Intel Rapid Storage Technology drivers and the Intel Storage Matrix drivers that are listed on HPs website and copied the drivers over to a floppy disk (two separate floppies, one for each version of the drivers.) Booting to my WinXP Pro x64 install CD, I go through the F6 process, load the driver and am able to see my HDD, delete, create and format partitions on it. When I go to continue the install, after checking the disk, the system asks me to enter the disk labeled "Intel Rapid Storage Technology" and press enter to continue. Nothing happens at this point when I press enter. This happens if I use the latest drivers or the older drivers. We have created a slipstreamed install CD using nLite that has the AHCI drivers integrated, which installs fine. However, we have identified a number of issues with the system that I believe are side-effects of using nLite for the slipstreaming and I am attempting to verify that. I have researched this issue and found a few examples of others having the same problem, but no solution. The USB floppy is a Lacie branded floppy, connecting it to a working XP workstation shows it to be the Y-E Data USB floppy drive that is supposedly 100% compatible with XP per MS KB 916196.

    Read the article

  • Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

    - by rkjnsn
    I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

    Read the article

  • HAProxy is caching the forwarding?

    - by shadow_of__soul
    i'm trying to set up a server structure for an application i'm building in Node.js with socket.io. My setup is: HAProxy frontend forward to -> apache2 as default backend (or nginx, is apache in this local test) -> node.js app if the url has socket.io in the request AND a domain name i have something like: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy daemon defaults log global mode http maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend all 0.0.0.0:80 timeout client 5000 default_backend www_backend acl is_soio url_dom(host) -i socket.io #if the request contains socket.io acl is_chat hdr_dom(host) -i chaturl #if the request comes from chaturl.com use_backend chat_backend if is_chat is_soio backend www_backend balance roundrobin option forwardfor # This sets X-Forwarded-For timeout server 5000 timeout connect 4000 server server1 localhost:6060 weight 1 maxconn 1024 check #forwards to apache2 backend chat_backend balance roundrobin option forwardfor # This sets X-Forwarded-For timeout queue 50000 timeout server 50000 timeout connect 50000 server server1 localhost:5558 weight 1 maxconn 1024 check #forward to node.js app The problem comes when i made a request to something like www.chaturl.com/index.html it load perfectly but fails to loads the socket.io files (www.chaturl.com/socket.io/socket.io.js) why it redirect to apache (and should redirect to the node.js app that serve the files). The weird thing is that if i access directly to the socket.io file, after refreshing a few times, it loads, so i suppose is "caching" the forwarding for the client when it makes the first request and reach the apache server. Any suggestion of how this can be solved? or what i can try or look about this?

    Read the article

  • Free tiered storage automation in linux?

    - by NginUS
    I have a couple virtualized fileservers running in QEMU/KVM on ProxmoxVE. The physical host has 4 storage tiers with significant performance variances. They're attached both locally and via NFS. These will be provided to the fileserver(s) as local disks, abstracted into pools, and handling multiple streams of data for the network. My aim is for this abstraction layer to intelligently pool the tiers. There's a similar post on the site here: Home-brew automatic tiered storage solutions with Linux? (Memory - SSD - HDD - remote storage) in which the accepted answer was a suggestion to abandon a linux solution for NexentaStor. I like the idea of running NexentaStor. It almost fits the bill. NexentaStor provides Hybrid Storage Pools, and I love the idea of checksumming. 16TB without incurring licensing fees is a huge plus as well. After the expense of the hardware, free is about all my budget can handle. I don't know if zfs pools are adaptive or dynamically allocated based on load, but it becomes irrelevant since NexentaStor doesn't support virtio network or block drivers, which is a must in my environment. Then I saw a commercial solution called SmartMove: http://www.enigmadata.com/smartmove.html And it looks like a step in the right direction, but I'm so broke I'd be wasting their time to even ask for a quote, so I'm looking for another option. I'm after a linux implementation that supports virtio drivers, and I'm at a loss as to which software is up to it.

    Read the article

< Previous Page | 652 653 654 655 656 657 658 659 660 661 662 663  | Next Page >