Search Results

Search found 22298 results on 892 pages for 'default'.

Page 656/892 | < Previous Page | 652 653 654 655 656 657 658 659 660 661 662 663  | Next Page >

• Lightweight Linux distro that includes developer tools? (or, the most BSD-like Linux)

  - by RevAaron

  I cut my teeth on Minix and Slackware 1.1, but I've been in the OS X Wilderness for the last few years. I'm trying to standardize on a Linux distribution for personal and work-related use on less powerful laptops and under virtualization. So far, NetBSD and OpenBSD are the best fit for my purposes- but after plenty of frustration I've come to the conclusion that I need to stick with Linux to get the hardware and software support that comes with it. What I like about NetBSD/OpenBSD that I'd like to keep: X, but no default KDE, GNOME or XFCE! A sensible /etc and dot file setup- startx calls xinit, xinit looks for ~/.xinitrc; nothing more complicated than that is needed. Command line tools and file-based configuration: I shouldn't need a GUI to connect to a WAP. Decent selection of binary packages; building from source is OK, but nothing source-only like Gentoo. pkg_add (BSD) and apt-get both have treated me well in the past. Modest RAM and HDD requirements: boot + X + awesome+ two xterms takes up 80 MB on OpenBSD and 240 MB on Debian 5 and Crunchbang In my experience, most "lightweight" and Live CDs focus on a nice desktop environment crammed into a CD or USB stick; once you add build-essentials you end up with something just about as bloated as Ubuntu or Debian full install. Crunchbang is a great example. Thanks in advance for all suggestions!

  Read the article

• SquidGuard and Active Directory: how to deal with multiple groups?

  - by Massimo

  I'm setting up SquidGuard (1.4) to validate users against an Active Directory domain and apply ACLs based on group membership; this is an example of my squidGuard.conf: src AD_Group_A { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_A%2cdc=domain%2cdc=com)) } src AD_Group_B { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_B%2cdc=domain%2cdc=com)) } dest dest_a { domainlist dest_a/domains urllist dest_b/urls log dest_a.log } dest dest_b { domainlist dest_b/domains urllist dest_b/urls log dest_b.log } acl { AD_Group_A { pass dest_a !dest_b all redirect http://some.url } AD_Group_B { pass !dest_a dest_b all redirect http://some.url } default { pass !dest_a !dest_b all redirect http://some.url } } All works fine if an user is member of Group_A OR Group_B. But if an user is member of BOTH groups, only the first source rule is evaluated, thus applying only the first ACL. I understand this is due to how source rule matching works in SquidGuard (if one rule matches, evaluation stops there and then the related ACL is applied); so I tried this, too: src AD_Group_A_B { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_A%2cdc=domain%2cdc=com)) ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_B%2cdc=domain%2cdc=com)) } acl { AD_Group_A_B { pass dest_a dest_b all redirect http://some.url } [...] } But this doesn't work, too: if an user is member of either one of those groups, the whole source rule is matched anyway, so he can reach both destinations (which is of course not what I want). The only solution I found so far is creating a THIRD group in AD, and assign a source rule and an ACL to it; but this setup grows exponentially with more than two or three destination sets. Is there any way to handle this better?

  Read the article

• Puppet and Vim fighting over Ruby version

  - by devians

  I have installed puppet from the .dmg from puppetlabs. If I remove ruby 1.9.3, puppet works, but other things like my vim install (dependant plugins) do not. According to http://docs.puppetlabs.com/guides/platforms.html#ruby-versions 1.9.3 is supported. So whats going wrong with puppet? % uname -a Darwin Kusanagi.local 11.4.2 Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 x86_64 % which ruby /usr/local/bin/ruby % ruby --version ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-darwin11.4.2] % /usr/bin/ruby --version ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin11.0] % brew info ruby 1 ? ruby: stable 1.9.3-p327, HEAD http://www.ruby-lang.org/en/ Depends on: pkg-config, readline, gdbm, libyaml /usr/local/Cellar/ruby/1.9.3-p327 (796 files, 17M) * https://github.com/mxcl/homebrew/commits/master/Library/Formula/ruby.rb ==> Options --with-tcltk Install with Tcl/Tk support --with-suffix Suffix commands with "19" --universal Build a universal binary --with-doc Install documentation ==> Caveats NOTE: By default, gem installed binaries will be placed into: /usr/local/Cellar/ruby/1.9.3-p327/bin You may want to add this to your PATH. % puppet /usr/local/Cellar/ruby/1.9.3-p327/lib/ruby/1.9.1/rubygems/custom_require.rb:36:in `require': cannot load such file -- puppet/util/command_line (LoadError) from /usr/local/Cellar/ruby/1.9.3-p327/lib/ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from /usr/bin/puppet:3:in `<main>'

  Read the article

• Error applying iptables rules using iptables-restore

  - by John Franic

  Hi I'm using Ubuntu 9.04 on a VPS. I'm getting an error if I apply a iptables rule. Here is what I have done. 1.Saved the existing rules iptables-save /etc/iptables.up.rules Created iptables.test.rules and add some rules to it nano /etc/iptables.test.rulesnano /etc/iptables.test.rules This is the rules I added *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 22- j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT After editing when I try to apply the rules by iptables-restore < /etc/iptables.test.rules I get the following error iptables-restore: line 42 failed Line 42 is COMMIT and I comment that out I get iptables-restore: COMMIT expected at line 43 I'm not sure what is the problem, it is expecting COMMIT but if COMMIT is there it's giving error. Could it be due to the fact i'm usin a VPS?My provider using OpenVZ for virtualizaton.

  Read the article

• Lock down Wiki access to password only but remain open to a subnet via .htaccess

  - by Treffynnon

  Basically we have a Wiki that has some sensitive information stored in it - not the best I know but my predecessor set it up. I want to be able to request password access from any one who is not on the local network subnet. Those on the local subnet should be able to proceed without entering a password. The following .htaccess does not seem to work any more as it is letting non-local access without requiring the password: AuthName "Our Wiki" AuthType Basic AuthUserFile /path/to/passwd/file AuthGroupFile /dev/null Require valid-user Allow from 192.168 Satisfy Any order deny,allow And I cannot work out why. The WikkaWiki it is supposed to be protecting was recently upgraded, which clobbered the .htaccess file so I restored the above from memory/googling. Maybe I am missing an important directive? The full .htaccess is as follows: AuthName "Our Wiki" AuthType Basic AuthUserFile /path/to/passwd/file AuthGroupFile /dev/null Require valid-user Allow from 192.168 Satisfy Any SetEnvIfNoCase Referer ".*($LIST_OF_ADULT_WORDS).*" BadReferrer order deny,allow deny from env=BadReferrer <IfModule mod_rewrite.c> # turn on rewrite engine RewriteEngine on RewriteBase / # if request is a directory, make sure it ends with a slash RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^(.*/[^/]+)$ $1/ # if not rewritten before, AND requested file is wikka.php # turn request into a query for a default (unspecified) page RewriteCond %{QUERY_STRING} !wakka= RewriteCond %{REQUEST_FILENAME} wikka.php RewriteRule ^(.*)$ wikka.php?wakka= [QSA,L] # if not rewritten before, AND requested file is a page name # turn request into a query for that page name for wikka.php RewriteCond %{QUERY_STRING} !wakka= RewriteRule ^(.*)$ wikka.php?wakka=$1 [QSA,L] </IfModule>

  Read the article

• Powershell: Execute exe on remote server and capture output

  - by user364825

  I am trying to script the execution of an installer on remote web servers. The installer in question is also a Windows Service that hosts NServiceBus. If RDP'd into the server, the application is installed by the following command: &"$theInstaller" /install /serviceName:TheServiceName The installer prints output about its progress registering the service and connecting to the database to stdout, among other things. This works fine from an RDP session, but when I execute it remotely via PS, I get a you-can't-do-this-over-the-network message if I execute it directly or via Invoke-Command -computername $theRemoteServer: System.IO.FileLoadException: Could not load file or assembly 'file://\\theRemoteServer\c$ \thePath\AutoMapper.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) --- System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. (Note: I added an additional "\" to the path in the first line in order to get it to show up correctly in the preview on this site.) This, and other DLLs, are loaded by the service, and the service's execution context cannot, apparently, be remotified. I have also tried using Invoke-WmiMethod, which does something, but it's not clear what, and the output from the installer is lost: Invoke-WMIMethod win32_process create '"$theInstaller" /install /serviceName:TheServiceName' -ComputerName $server (with and without cmd.exe /k before the intaller reference): __GENUS : 2 __CLASS : __PARAMETERS __SUPERCLASS : __DYNASTY : __PARAMETERS __RELPATH : __PROPERTY_COUNT : 2 __DERIVATION : {} __SERVER : __NAMESPACE : __PATH : ProcessId : ReturnValue : 9 How does one remotely execute such an EXE and capture the output? Thanks!

  Read the article

• Distribute IP packets accross different NIC queues with MSI (Message Signalled Interrupts)

  - by Ansis Atteka

  NetXtreme II BCM5709 Gigabit Ethernet NIC supports MSI feature (Message Signaled Interrupts) and it has 8 queues. Each queue has its own Interrupt handler in /proc/interrupts. What I am trying to accomplish is to tell NIC which packets should go to which queue. Questions: Is it possible to manually specify which IP packets should go to which queue by encapsulated protocol type (e.g. IPsec packets go in one queue, while TCP packets go in another queue)? If it is possible - how can I do it under Linux? If it is not possible - should I look at MSI-X capable NIC cards to solve this problem? More details: We have one Interface that is terminating IPSec and forwarding/terminating TCP connections. The IPSec packet decryption is inlined (this means that decryption is done under the same ksoftirqd/X context). We are trying to find out if we will be able to improve total performance if IPSec packets will be scheduled on another CPU than TCP packets. One more limitation is that IPSec code is not MP-safe, hence I can not run it under more than one ksoftirqd/X. By default it seems that packets are distributed/hashed by source IP over the 8 NIC queues. The bottleneck is IPSec that chokes out TCP traffic while it is decrypting/encrypting IPSec packets at ~100% CPU. OS is Ubuntu 10.10 (2.6.32-27-server) and NIC is Broadcom BCM5709.

  Read the article

• route propogation using OSPF in a network

  - by liv2hak

  I am using Juniper J-series routers to emulate a small telco and VPN customer.The internal routing will be configured with OSPF,MPLS including a default and backup path,RSVP for distributing labels withing the telco,OSPF for distributing routes from the customer edge (CE) routers to the VRF's in the adjacent PE's and finally iBGP for distributing customer routes between VRF's in different PEs. The topology of the network is shown below. The Addressing scheme for the network is as follows. UOW-TAU ******* ge-0/0/0 192.168.3.1 TAU-PE1 ******* ge-0/0/0 10.0.1.0 ge-0/0/1 10.0.2.0 ge-0/0/2 192.168.3.2 TAU-P1 ****** ge-0/0/0 172.16.1.0 ge-0/0/1 172.16.3.1 ge-0/0/2 10.0.2.2 HAM-P1 ****** ge-0/0/0 172.16.3.2 ge-0/0/1 172.16.2.1 ge-0/0/3 10.0.3.2 ACK-P1 ****** ge-0/0/0 172.16.1.2 ge-0/0/2 172.16.2.2 ge-0/0/3 10.0.1.2 HAM-PE1 ******* ge-0/0/0 10.0.3.1 ge-0/0/2 192.168.4.2 UOW-HAM ******* ge-0/0/0 192.168.4.1 I also set up loopback address for each node. I want to setup OSPF so that path to each internal subnet and router loopback address is propogated to all PE and P nodes.I also want to select a single area for PE and P nodes,and on each node I should add each interface that should be propogated. How do I accomplish this.? With my understanding below is the procedure to achieve this.Is the below explanation correct? I set up OSPF on UOW-TAU ge-0/0/0 interface and ge-0/0/1 interface and UOW-HAM ge-0/0/0 interface and ge-0/0/1 interface. let me call this Area 100. Once I have done this I should be able to reach each node from others using ping and traceroute. Any help is highly appreciated.

  Read the article

• nginx starts up before apache

  - by paullb

  I've been fumbling through setting up redmine on a unbuntu (12.04) box and somewhere along the line NginX got set up and now apache no longer loads because nginx has already grabbed the port. I tried removing NginX with the below command but that didn't seem to make any difference. When I restarted the server and pointed my web browser I still got the "Welcome to NginX" message sudo apt-get purge nginx I have confirmed that NginX is gone because when I run the above now I get as an output Package nginx is not installed, so not removed Yet everytime I start the machine it is running again. I noticed the following for the running processes (if that is helpful) root 923 0.0 0.0 76784 1280 ? Ss 03:00 0:00 nginx: master process /usr/sbin/nginx www-data 925 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 926 0.0 0.1 77092 2204 ? S 03:00 0:00 nginx: worker process www-data 927 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 928 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process Any advice for bringing back apache2 as the "default" (for lack of a better term) web server?

  Read the article

• Mac 10.5 Python libsvm 64 bit vs 32 bit

  - by shadowsoul

  I have a Mac 10.5 when I type "python" in terminal, it says Enthought Python Distribution -- www.enthought.com Version: 7.3-2 (64-bit) Python 2.7.3 |EPD 7.3-2 (64-bit)| (default, Apr 12 2012, 11:14:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "credits", "demo" or "enthought" for more information. then I go to my libsvm/python folder and type "make" which results in make -C .. lib if [ "Darwin" = "Darwin" ]; then \ SHARED_LIB_FLAG="-dynamiclib -W1,-install_name,libsvm.so.2"; \ else \ SHARED_LIB_FLAG="-shared -W1,-soname,libsvm.so.2"; \ fi; \ g++ ${SHARED_LIB_FLAG} svm.o -o libsvm.so.2 when I try to do "from svmutil import *" I get the error: OSError: dlopen(.../libsvm-3.12/python/../libsvm.so.2, 6): no suitable image found. Did find: .../libsvm-3.12/python/../libsvm.so.2: mach-o, but wrong architecture when I do "lipo -info libsvm.so.2", I get: Non-fat file: libsvm.so.2 is architecture: i386 So it looks like I'm running 64-bit python but libsvm ends up as a 32-bit program. Any way I can get it to compile as a 64-bit program?

  Read the article

• PXE boot -- kernel not found on TFTP server

  - by user70523

  I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Mac Port error installing gsoap

  - by Kevin

  Hi All, I have installed Mac Ports V1.8.1 no worries. I ran sudo port -v selfupdate no worries. I ran sudo port install gsoap And get the following error message. --- Computing dependencies for gsoap --- Fetching gsoap --- Attempting to fetch gsoap_2.7.13.tar.gz from http://optusnet.dl.sourceforge.net/gsoap2 --- Verifying checksum(s) for gsoap --- Extracting gsoap --- Applying patches to gsoap --- Configuring gsoap Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gsoap/work/gsoap-2.7" && ./configure --prefix=/opt/local --enable-samples " returned error 77 Command output: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking build system type... i386-apple-darwin10.2.0 checking host system type... i386-apple-darwin10.2.0 checking whether make sets $(MAKE)... (cached) no checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Error: Status 1 encountered during processing. Any ideas as to why it is failing. Regards Kevin

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Understanding what needs to be in place for a server to send outgoing email from a linux box

  - by Matt

  I am attempting to configure an openSuse 11.1 box to send outgoing email for a domain that the same server is hosting. I don't understand enough about smtp servers and the like to know what needs to be in place and working. The system already had Postfix installed, and I confirmed it was running via a > sudo /etc/init.d/postfix status I examined the Postfix config file in /etc/main.cf and configured a couple of items regarding the domain/host name and such, but left it largely default. I attempted to send an email from the command line with the following command: > echo "test 123" | mail -s "test subject" [email protected] Where differentdomain.com was not the same domain as the one best hosted on the server. However, the email never reaches the target account. Any suggestions? EDIT: In the postfix log, (/var/log/mail.info, there's nothing in .err) I see that postfix is trying to connect to what appears to be a different smtp server on our network, with a connection refused: connect to ourdomain.com.inbound15.mxlogic.net[our ip address]:25: Connection refused However, I can't figure out why it is 1) trying to connect to that server and 2) not just sending the messages itself... I mean, isn't postfix an smtp server? I did a grep -ri on ourdomain from /etc and see no configuration files anywhere telling it to do this. Why is it?

  Read the article

• Gmail notification in Ubuntu's native mail icon.

  - by D Connors

  So, new Ubuntu 10.04 up and running. Playing with the interface eventually got me curious about something. Up until now, I've only used the chat and broadcasting functionalities of the mail icon in Ubuntu's top panel, mostly because I take care of my mail on firefox so I don't need one more program (empathy) running on my poor little netbook. I'm currenty using gnome-gmail to set gmail as my default mail client in Ubuntu. But, when I click on the "Set up mail" item, inside the Panel's Mail icon, it simply brings up empathy. My question is: Is it possible (in any way whatsoever) to have my gmail notifications up there, configured so that clicking it will just take me to a gmail tab in Firefox? (instead of opening up empathy) This is really just some frivolous interest of mine, nothing important. Right now I'm using check-gmail to notify me of new mail, but the panel is really cramped up on my netbook, so it'd be nice to free up some room by getting rid of check-gmail and only using Ubuntu's mail icon. Ok, hope I was clear enough.

  Read the article

• Group Policy GPO not 'seen' at client

  - by fukawi2

  I have a new OU (natorg.local\NATO\Users) that I am trying to apply GP to. I have created a new user in this OU, and linked the 3 GPO's to this OU: DESKTOP - Folder Redirection (AppData) DESKTOP - Folder Redirection (Desktop) DESKTOP - Folder Redirection (Documents) Hopefully the names are sufficient to suggest what they do exactly. The settings are under User Settings so there is no Loopback processing required (if my understanding is correct). GP Modelling for the user and specific computer says that the GPOs will/should be applied, however on the client, gpresult doesn't even appear to see the GPOs under either "Applied" or "Not Applied": USER SETTINGS -------------- CN=Amir,OU=Users,OU=NATO,DC=natorg,DC=local Last time Group Policy was applied: 25/06/2012 at 11:07:13 AM Group Policy was applied from: svr-addc-01.natorg.local Group Policy slow link threshold: 500 kbps Applied Group Policy Objects ----------------------------- LAPTOPS - Power Settings WSUS - Set Server Address OUTLOOK - Auto Archive SECURITY - Lock Screen After Idle Default Domain Policy DESKTOP - Regional Settings NETWORK - Proxy Configuration NETWORK - IE General Config OFFICE - Trusted Locations OFFICE - Increase Privacy OUTLOOK - Disable Junk Filter DESKTOP - Disable Windows Error Reporting DESKTOP - Hide Language Bar NETWORK - Disable Skype DESKTOP - Disable Thumbs.db Creation WSUS - Set Server Address The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- Local Group Policy Filtering: Not Applied (Empty) NETWORK - Google Chrome Configuration Filtering: Not Applied (Empty) SYSTEM - Event Log Configuration Filtering: Not Applied (Empty) SECURITY - Local Administrator Password Filtering: Not Applied (Empty) NETWORK - Disable Windows Messenger Filtering: Not Applied (Empty) SECURITY - Audit Policy Filtering: Not Applied (Empty) WSUS - Automatic Install Filtering: Not Applied (Empty) NETWORK - Firewall Configuration Filtering: Not Applied (Empty) DESKTOP - Enable Offline Files Filtering: Not Applied (Empty) I haven't altered permissions on the GPO's at all, no WMI filtering... As I said, GP Modelling says that they should be applied. GPResult on the client correctly identifies itself as being the correct OU (CN=Amir,OU=Users,OU=NATO,DC=natorg,DC=local) There are 2 x 2008R2 and a 2003 DC, domain is 2003 level, client is Windows XP SP3. Can anyone suggest why these GP Objects would be "invisible" to the client?

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

  Read the article

• How to create an MST for silent install using Orca?

  - by Sanarothe

  Hi. I'm trying to deploy 7zip via GPO; I assigned the original MSI, but the package installation simply doesn't take place. What I've gathered is that I need to create an MST. In the spirit of trying to learn as much as possible about it, I've opted to use Orca rather than a third-party automagic tool, but I'm at a loss as to which fields to edit. So far the only change that I've made is to give the license accepted checkbox a value of "1" instead of pointing to another key that, still, just gave it a value of "1." So, to give this some structure, How does (Or what criteria should I consider) creating a MST make the install noninteractive/silent? Do you have to manually reconfigure the MSI to simply not perform the GUI aspects? Or do I have to execute the program in silent mode after defining the variables the the installer requests? (Though, of course, it seems that would defeat the purpose of the MST) How do I determine which fields I need to edit? I've loaded the installer and it takes three inputs: License acceptance, feature set and installation location. I want all of the default values: I'm just trying to deploy it at all, not customize the installation. I BELIEVE that I should be messing with some values in the Registry table, but I really don't know. If I'm not asking the right questions, can someone point me to a THOROUGH resource or documentation for this process? I've already gone over the technet articles on basic Orca use and deployment, but I couldn't really find anything on creating MST that didn't involve a third party program in which one runs a 'dummy' installer to get the before and after snapshots. Thank you very much, Cameron UPDATE: After spending the day troubleshooting, I finally got my server to send out 7zip, but not until I had also assigned firefox. Not sure why it didn't want to send out 7zip by itself, but I also had some domain naming problems. Thanks for the input (GPResult helped enormously.)

  Read the article

• Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

  - by Richard Maynard

  We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• Problems with ipsec betwen Cisco ASA 5505 and Juniper ssg5

  - by Oskar Kjellin

  I am trying to set up an ipsec tunnel between our ASA 5505 and a Juniper ssg5. The tunnel is up and running, but I cannot get any data through it. The local network I am on is 172.16.1.0 and the remote is 192.168.70.0. But I cannot ping anything on their netowork. I receive a "Phase 2 OK" when I set up the ipsec. I think this is the part of the config that is applicable. It seems like the data is not routed through the tunnel, but I am not sure... object network our-network subnet 172.16.1.0 255.255.255.0 object network their-network subnet 192.168.70.0 255.255.255.0 access-list outside_cryptomap extended permit ip object our-network object their-network crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer THEIR_IP crypto map outside_map 1 set ikev1 phase1-mode aggressive crypto map outside_map 1 set ikev1 transform-set ESP-3DES-MD5 crypto map outside_map 1 set ikev2 pre-shared-key ***** crypto map outside_map 1 set reverse-route crypto map outside_map interface outside webvpn group-policy GroupPolicy_THEIR_IP internal group-policy GroupPolicy_THEIR_IP attributes vpn-filter value outside_cryptomap ipv6-vpn-filter none vpn-tunnel-protocol ikev1 tunnel-group THEIR_IP type ipsec-l2l tunnel-group THEIR_IP general-attributes default-group-policy GroupPolicy_THEIR_IP tunnel-group THEIR_IP ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key *****

  Read the article

• Start daemon after specific samba share is mounted

  - by getack

  I axed this question on AskUbuntu, but it's not getting any traction from there... So I'll try here as well: I have a homebrew headless NAS running 12.04. In it I have a bunch of disks that are presented as a samba share thanks to Greyhole. If I want to do anything to the files within this share, I must do it through greyhole so that everything is updated properly. Thus, the share must be mounted locally and then accessed from there if I want to work on the files from the local machine. I do this mounting automatically thanks to these instructions. I also have Deluge installed that takes care of all my torrenting needs. Deluge's default download location is in this share, so that all the downloads are immediately available to the rest of the network. Obviously for everything to work, the share must be mounted, otherwise Deluge is going to have a problem downloading to it. The problem is, it seems like Deluge is starting before the shares are mounted when the system boots. So downloading/seeding does not continue automatically after boot. I have to log in and force a manual rescan and start on each torrent otherwise all the torrents just hangs on the error. Is there a way I can make deluge start after the shares got properly mounted? I looked into Upstart's emits functionality but I cannot seem to get it to work properly. Any advice?

  Read the article

• Does WebDAV even work on IIS 7? I say nay

  - by FlavorScape

  I've tried every configuration from the top 10 stack overflow and server fault results for WebDAV 405 on IIS (for verb PROPFIND and PUT). I'm running server 2008 SP2. Followed all the instructions here. I'm no stranger to configuring servers. This has gotten nowhere after 8 hours. Confirmed system.webserver in applicationhost.config: <add name="WebDAV" path="*" verb="PROPFIND,PROPPATCH,MKCOL,PUT,COPY,DELETE,MOVE,LOCK,UNLOCK" modules="WebDAVModule" resourceType="Unspecified" requireAccess="None" /> Port 443 with basic auth, same issue. Tried port 80 with windows auth. Broken. (405) Windows authentication. Check. Added authoring rules for default site and application. Check. Not the firewall. Check. added "Desktop Experience" role feature Tried HTTPS with Basic Authentication on port 443. Does not work. No other services are running like Sharepoint. Check. confirmed user has read/write NT level permissions for the folder/virtual dir tried net use * http://localhost /user:MYDOMAIN\me myPass get error 1920, if I don't authenticate I get error 67 confirmed I'm not applying filtering to WebDAV: <requestFiltering> <fileExtensions applyToWebDAV="false" /> <verbs applyToWebDAV="false" /> <hiddenSegments applyToWebDAV="false" /> 405 - HTTP verb used to access this page is not allowed. The page you are looking for cannot be displayed because an invalid method (HTTP verb) was used to attempt access. SHOULD I JUST GIVE UP? Other questions that helped none: 405 - ‘Method not Allowed’ adding service hosted in IIS7 webdav on iis7.5 - simply cannot make it work http://studentguru.gr/b/kingherc/archive/2009/11/21/webdav-for-iis-7-on-windows-server-2008-r2.aspx

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

< Previous Page | 652 653 654 655 656 657 658 659 660 661 662 663  | Next Page >