Search Results

Search found 18024 results on 721 pages for 'ruby enterprise edition'.

Page 657/721 | < Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >

• Will Intel be releasing anymore 6-core processors soon?

  - by jasondavis

  I am about to start buying parts every week for as long as it takes me to build the best PC I can build. I am looking at the Intel i7-920 processor right now because it is about 250$ and it is a quad-core processor based on the x58 chipset I believe. From what I have read so far, intel is coming out with some 6-core processors soon that will also use the x58 chipset and will allow me to use the same motherboard and memory/ram to upgrade to a 6-core. This sounds really good to me right now. I just read that the new 6-core processor. The Core i7-980X (extreme edition) was just released which is the first 6-core processor but it is supposed to be around $1,000 so I will probably just get the i7-920 for now and then upgrade to the 6-core version when the price goes down. The motherboard I am looking at getting the GIGABYTE GA-X58A-UD5 which is around $280 at newegg.com So that is my basic plan SO far. I have not purchased any parts yet. I am just wanting to ask if this sounds like a good idea or if I should wait longer if I am wanting to eventually have a 6-core processor. Does anyone know if Intel is planning on releasing any other 6-core processor in addition to the Core i7-980X in the near future? I just want to make sure I am buying the best setup for my money if I am going all out on it, thanks for any tips/advice.

  Read the article

• Desktop virtualization

  - by gurpal2000

  Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

  Read the article

• Windows 2003 R2 zip program blocking EXE file

  - by Harvey Kwok

  I have a Windows 2003 R2 Enterprise Edition SP2 32-bit machine with all latest patch (as of 1-6-2011). It's a VM. I have a zip file, including a pdf file, a txt file and a exe file. If I copy the zip file onto the machine via a shared network drive, I can unzip all the files properly without problems. If I put the zip file on my web server and then I download it from there, I can only unzip the pdf file and txt file. The exe file is silently ignored. I searched the web and found somebody reporting similar issue on XP. If I right click on the zip file downloaded from the web server, at the bottom of the general page, it has a warning message saying that "This file came from antoher computer and might be blocked to help protect this computer" I understand that I can solve the problem by simply clicking the "Unblock" button and extract the file again. The things that bothering me is that why the warning message says "might be blocked"? I tried downloading the same zip file from the same web server on to my Windows 7 box with latest patch. It also shows the same warning message. However, even with the warning message, I can extract all the files properly without clicking the "Unblock" button. Is it a bug in Windows 2003 R2 SP1? Is there any security settings controlling this? How likely will the end user seeing this problem? I want to dig into this because I am worrying people downloading my zip file from my web server might see similar problems. The first thought coming to the user's mind will be the zip file is somehow corrupted. Honestly, I didn't know this "Unblock" feature in Windows before I run into this problem. EDIT I just tried it on another Windows 2003 R2 SP1 machine. The zip program doesn't block the EXE file on that machine either. Both Windows 2003 R2 SP1 machines are joining to the same forest.

  Read the article

• What's the lowest cost, legal, Microsoft server stack you can assemble?

  - by McKAMEY

  Assuming that you have an app infrastructure that generally only requires: ASP.NET MVC / C# / .NET Database or NoSQL data store (must be accessible from C#) Here's the challenge to you server gods: What is the least expensive configuration that will allow you to deploy to production in a way that doesn't break any licensing rules? In what ways does this solution differ from the "standard" Microsoft deployment scenario? Where does this solution's performance break down once the app begins to scale? I'm not concerned about the hardware, only the server software itself. I would love to hear about any solutions you've personally put into production. Especially if they are unique alternatives. For ideas, consider some of the possible variations, a) any Microsoft server solutions where they have lowered the barrier to entry to compete with OSS, or b) any OSS alternatives to Microsoft products which perform at a similar level. An example of a): SQL Server 2008 Express Edition SP1 is a 100% free version of SQL Server which will scale to the needs of many smaller / early stage applications. An example of b): running the Mono Framework on Linux. An example of differing from the "standard" stack: running Mono on Linux will require a completely different server OS familiarity. None of the Windows-based knowledge really transfers. An example of breaking down under scale: SQL Server Express will only scale to 1GB of memory and 4GB of disk storage. After that point, the application will need to move to one of the paid versions of SQL Server.

  Read the article

• Kindle (client) for Mac

  - by doug

  So we're clear, i'm talking bout the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I bought a couple of Kindle-edition books and i'm reading them using this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

  Read the article

• 2560 x 1600 screen resolution not available when a second monitor is attached.

  - by sgmoore

  I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• SSO "Portal"

  - by Clinton Blackmore

  Pursuant to my question on alleviating the password explosion, I've contacted some of the services to whom we are paying money to access their websites to ask if we could authenticate our own users, and some of them said yes and send me specs on how to do so. (One of the sites called such a system a page a "portal"; I've never heard the term used in quite that way.) It is simple enough that I am tempted to roll my own. The largest complication is that one site wants us to store a key for every user in our database (and I think the LDAP database makes sense) after their initial login. So, non-trivial, but doable. The nature of these sorts of tasks, I expect, is that if they start out small and simple, they don't end that way. There must be some software that addresses this that is readily extended, surely. In my searching, I've come across: SimpleSAMLphp JOSSO RubyCAS-Server Shibboleth Pubcookie OpenID [Wow, gee. I'd missed some of those in my previous searches! The wikipedia page on Central Authentication Services is useful, and the section on Alternatives to OpenID makes it look like there is a lot of choice.] Can anyone recommend any of these, or suggest ones to avoid? Internally, we are authenticating using Apple's Open Directory [ == OpenLDAP + Kerberos + Password Server (which, I believe, == SAML) ]. As far as extending/tweaking/advanced configuration of a system, I am able to program in Python, C++, can do some basic PHP, and may be able to remember some Java. Looks like I need to pick up Ruby at some point. Addendum: I would also like users to be able to change their passwords over the web (and for certain users to change passwords of other users).

  Read the article

• ISC DHCPD IPv6 for multiple interfaces

  - by Seoman

  I want to assign multiple IPv6 to a server with multiple NIC. As IPv6 RFC defines, each server has a unique DUID that can have one of the 3 formats (LL, LLT or enterprise). And each NIC has an IAID. So a request from NIC1 its the DUID and the IAID of the NIC1 and the request from NIC2 its the same DUID but the IAID its different. The problem is that from a Centos box, when I ask for an IP in 2 different interfaces, I get the same IP. I can't find how to specify host entry based on DUID and the IAID. I see some people generating a unique DUID based on the MAC of the NIC but this is not IPv6 RFC says. What I tried is: host entry1 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:09:40:5d"; fixed-address6 2001:db8:0:1::202; } host entry2 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:7e:c9:ec"; fixed-address6 2001:db8:0:1::201; } This causes a Segmentation Fault in the client (what is scary...). I guess is not the right use for ia-na option but I don't see any other option.

  Read the article

• Should I upgrade to Symantec Endpoint Protection?

  - by Alex C.

  I'm the IT manager at an animal shelter in Upstate New York. We have a Windows network with about 50 desktops running Windows XP Pro. We used to use CA eTrust Antivirus, but that product didn't work too well (too many infections got through). About six months ago, we switched to using Symantec Antivirus Corporate Edition ver. 10.1.8.8000. If anything, the Symantec product is even worse. The last six weeks in particular have been very bad -- we've had about seven or eight PCs get hit with those malware infections that masquerade as antivirus software. In most of those cases, Symantec didn't even flag the malware at all. So... what gives with the Symantec Antivirus? As far as I can tell, it's installed correctly and downloading updated definitions nightly. I can upgrade to Symantec Endpoint Protection for $220 (we get non-profit pricing), but I don't want to do it if it's not going to be significantly better. Any advice? Should I switch to something else entirely? Thanks!

  Read the article

• CentOs 6.3 can't install Git

  - by drivard

  I am trying to install git on an OpenVZ container using the CentOs 6.3 precreated template. When I try the command line yum install git I get the message: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: www.cubiculestudio.com * epel: mirror.csclub.uwaterloo.ca * extras: www.cubiculestudio.com * rpmforge: mirror.us.leaseweb.net * updates: www.cubiculestudio.com Setting up Install Process No package git available. Error: Nothing to do As I understand, the git package should be in the centos6 base repository: http://pkgs.org/centos-6-rhel-6/centos-rhel-x86_64/git-1.7.1-2.el6_0.1.x86_64.rpm.html But it doesn't find it, I even have the EPEL and RPMForge repo enabled, but still can't find the git package. yum repolist Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: www.cubiculestudio.com * epel: mirror.csclub.uwaterloo.ca * extras: www.cubiculestudio.com * rpmforge: mirror.us.leaseweb.net * updates: www.cubiculestudio.com repo id repo name status base CentOS-6 - Base 4,776 epel Extra Packages for Enterprise Linux 6 - i386 6,523 extras CentOS-6 - Extras 4 rpmforge RHEL 6 - RPMforge.net - dag 4,501 updates CentOS-6 - Updates 596 vz-base vz-base 3 vz-updates vz-updates 0 repolist: 16,403 The weirdest thing is that my OpenVZ server is running on CentOs 6.3 and I was able to install git without any issue. Can you help me understanding why it doesn't find the package? Thank you in advance.

  Read the article

• Expanding to dual video cards

  - by Anthony Greco

  I know a lot of factors can go into play here, so I will list my current hardware and setup: MOBO: GIGABYTE GA-890FXA-UD5 [http://www.newegg.com/Product/Product.aspx?Item=N82E16813128441] Processor: AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz [http://www.newegg.com/Product/Product.aspx?Item=N82E16819103849] Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) [https://secure.newegg.com/NewMyAccount/OrderHistory.aspx?RandomID=4933910872745320111128011418] Current video card: EVGA 01G-P3-1366-TR GeForce GTX 460 SE [http://www.newegg.com/Product/Product.aspx?Item=N82E16814130591] OS: Windows 7 Ultimate x64 Currently I can run 2 monitors just fine in my setup. However, I want to upgrade this to 4 monitors. My question is, what is the best way to do this? I remember in the past reading I need the same type of video card, however would any GeForce GTX work, or do i need that very specific model (EVGA 01G-P3-1366-TR GeForce GTX 460 SE)? Are there any issues I should be aware of before I order 2 new monitors and a video card? Are there video cards better setup for this? I know NVidia offers SLI, however I do not know if my mobo is compliant. My mobo also offers CrossFireX configuration, though from what it says only Radeon are compliant. Any suggestions / feedbacks on my best route with my current setup is appreciated. Even if you suggest buying 2 new identical video cards, as long as you can mention which and why that is better I really appreciate it. Note: I really do not do any gaming. I sometimes do some 3D work in Unity and very rarely in Maya. Besides that I mostly do all my computer work in Visual Studios and Photoshop. I however need the 2 extra monitors because I monitor sometimes 5 remote desktops at once and switching on only 2 is becoming a very big pain. Also seeing 3 side by side while I work on the 4th will be very helpful. Again, I appreciate any feedback, as I have googled a bunch and just want to make sure what I buy will work.

  Read the article

• Auto-rebuild RAID6 with MDADM

  - by user65632

  Hello everybody, i'm new in this forum, and because I see that a lot of people get helped here, i'll ask my question here! I have a openSUSE 11.3 Linux computer with 5 disks of 1TB (WD enterprise disks) in it. with mdadm I configured an RAID6 device. Now, after a lot of thorough testing, i've noticed that when the computer goes down unsuspectedly it could happen (1 time out of 10) that while booting, the md0 device isn't recognised, and then the machine goes in "recovery mode", which means that i have to 'CTRL + C' it so it can boot to openSUSE. Once in openSUSE i have to readd the drive manually with 'mdadm /dev/md0 --add /dev/sdX'. After this everything works back fine (after resynching). So my question is: Is there a way to auto-rebuild the RAID6 device when there are problems? and how can I stop this "recovery mode" from happening. Because the computer will be in a place I can't go to, to connect a keyboard, 'CTRL + C' it just to get in openSUSE. If you could help me, I would be a very very very! happy man! :-) thanks in advance! Mikhail

  Read the article

• Mail to Mailenable group sometimes bounces back because it cannot find one of the group members

  - by Stanley

  I am using MailEnable Enterprise Edition 6.53. On one of my PostOffices I have a group address set up with 5 members in the group. Under normal circumstances when someone sends a mail to this group then the mail gets successfully forwarded to all 5 members in the group. However, every now and then when a recipient sends to the group they get a bounce back message from us that the mail could not be delivered because one of the user's addresses was not found on the server. This could happen for any one of the 5 users in the group. The error message looks like: Message could not be delivered. Error was: The email address is not available on this system The following recipient(s) could not be reached: [SF:mydomain.com/my_username] What could be causing this and how do I fix it? Obviously the mailbox DOES exist as, under normal circumstances, when someone mails the group the mail gets delivered successfully and forwarded to all group members. All the mailboxes most definitely DO exist on the system. EDIT: I have done more investigation and I see an error in Windows Event Viewer: MailEnable Database Provider error: 0 FAILURE: (SQLDriverConnect), Module: MEIMAPS.exe; Error: [Microsoft][ODBC SQL Server Driver]Timeout expired This seems to be related to http://forum.mailenable.com/viewtopic.php?p=53157 and http://www.mailenable.com/kb/content/view.asp?ID=ME020535 but the setups in these links use MySQL as a database whereas we use SQL Server. Maybe this shines some new light on the problem?

  Read the article

• Resolve another domain from current AD domain

  - by faulty

  We have 2 AD domain setup in our office. First is the primary domain for our office and exchange. The 2nd one is for development use to simulate production environment of our clients. Both domain are hosted on Windows 2008 R2 Enterprise. We, the development team has no access to the office domain other than login and email purpose. DNS is running on PDC of both domain. Both domain does not use public domain name. Now, our machines are joined to the development domain and we use outlook to access our office's exchange. We've added DNS entries for both the domain. From time to time we are having problem resolving our office domain (i.e. during outlook login), which we need to edit our NIC's DNS to have only DNS server from our office and then flush DNS. After that switch back once it's able to resolve. Is there a permanent solution for this scenario like specifying that the office domain be resolve with another DNS server when requested from the development domain? Thanks

  Read the article

• Can I use a single SSLCertificateFile for all my VirtualHosts instead of creating one of it for each VirtualHost?

  - by user65567

  I have many Apache VirtualHosts for each of which I use a dedicated SSLCertificateFile. This is an configuration example of a VirtualHost: <VirtualHost *:443> ServerName subdomain.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/users/public" RackEnv development <Directory "/Users/<my_user_name>/Sites/users/publ`enter code here`ic"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on #Self Signed certificates SSLCertificateFile /private/etc/apache2/ssl/server.crt SSLCertificateKeyFile /private/etc/apache2/ssl/server.key SSLCertificateChainFile /private/etc/apache2/ssl/ca.crt </VirtualHost> Since I am maintaining more Ruby on Rails applications using Passenger Preference Pane, this is a part of the apache2 httpd.conf file: <IfModule passenger_module> NameVirtualHost *:80 <VirtualHost *:80> ServerName _default_ </VirtualHost> Include /private/etc/apache2/passenger_pane_vhosts/*.conf </IfModule> Can I use a single SSLCertificateFile for all my VirtualHosts (I have heard of wildcards) instead of creating one of it for each VirtualHost? If so, how can I change the files listed above?

  Read the article

• TV won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• SQL 2008 SP1 crashing almost daily

  - by matijake

  Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process.     Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

  Read the article

• Configuring https access on HP A5120 Switch

  - by GerryEgan

  I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

  Read the article

• Is StoreJet Transcend (0x2329) an Advanced Format drive?

  - by Graham Perrin

  I use a 640 GB StoreJet Transcend (0x2329) with ZEVO Community Edition 1.1.1 on OS X 10.8.2. Question Is this drive Advanced Format? Background I submitted a request for technical support to Transcend but the first response was gibberish so I don't expect a reasonable follow-up. Models at http://www.transcend-info.com/Products/CatList.asp?LangNo=0&ModNo=293 are similar but different sizes (not 640 GB). Mine is probably 25M2 (TS640GSJ25M2): Unless I'm missing something, nothing currently in the Transcend support area tells me whether the drive is Advanced Format. From System Information in OS X 10.8.2: StoreJet Transcend: Capacity: 640.14 GB (640,135,028,736 bytes) Removable Media: Yes Detachable Drive: Yes BSD Name: disk3 Product ID: 0x2329 Vendor ID: 0x152d (JMicron Technology Corp.) Version: 0.00 Serial Number: 322549FBA004 Speed: Up to 480 Mb/sec Manufacturer: JMicron History for the ZFS pool shows creation in March 2012 –  macbookpro08-centrim:~ gjp22$ zpool history zhandy | grep create 2012-03-14.17:29:37 zpool create -f -O compression=off -O copies=1 -O casesensitivity=insensitive -O snapdir=visible zhandy /dev/dsk/GPTE_1928482A-7FE4-482D-B692-3EC6B03159BA 2012-06-22.15:51:16 zfs create zhandy/Pocket Time Machine At that time I almost certainly used ZEVO Setup Assistant to create the pool. macbookpro08-centrim:~ gjp22$ zpool get ashift zhandy NAME PROPERTY VALUE SOURCE zhandy ashift 0 default If I discover that the drive is Advanced Format, a different ashift value will be appropriate.

  Read the article

• Is there an SSL equivelent to an ssh agent?

  - by Matthew J Morrison

  Here is my situation: There are a number of developers who all need to have access to be able to install ruby gems and python eggs from a remote source. Currently, we have a server inside our firewall that hosts the gems and eggs. We now want the ability to be able to install things hosted on that server outside of our firewall. Since some of the gems and eggs that we host are proprietary I would like to somewhat lock access to that machine down, as unobtrusively as possible to the developers. My first thought was using something like ssh keys. So, I spent some time looking at SSL mutual authentication. I was able to get everything set up and working correctly, testing with curl, but the unfortunate thing was that I had to pass extra arguments to curl so it knows about the certificate, key and certificate authority. I was wondering if there is anything like the ssh agent that I can set up to provide that information automatically so that I can push the certificates and keys to the developer's machines so the developers don't have to log in or provide keys each time they try to install something. Another thing that I want to avoid is having to modify the 'gem' command and the 'pip' command to provide keys when they make the http connection. Any other suggestions that may solve this problem (not related to ssl mutual auth) are also welcome. EDIT: I've been continuing to research this and I came across stunnel. I think this may be what I'm looking for, any feedback regarding stunnel would also be great!

  Read the article

• Export-Mailbox Error

  - by tuck918

  All, I am using export-mailbox to move some data and it is working fine until I get this error: StatusMessage : Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000 This is the command I am using: export-mailbox -identity mailboxA -targetmailbox mailboxB -targetfolder folderA -allowmerge We are on SP2 and I am running this under an account that is not a domain or enterprise admin. THe account has Exchange Server Administrator Permission Both Source and Target Exchange Mailbox Server. THe account is part of the Local Administrators Group Member Both Source and Target Exchange Mailbox Server. This account has Full Access permission on both the target and source servers. THe issue happens at any time and I am only trying to run this on one mailbox, the only mailbox I need to run it on. THe event log is "Error Exchange Migration Export Mailbox Event 1008". The log under migration logs just shows that it was running okay then it gives the same error as above "Error was found for mailboxA ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000, error code: -1056749164" Any ideas on what to do/try?

  Read the article

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• Has anyone managed to build php5-xapian on Ubuntu 12.04?

  - by jetboy

  As Xapian's been dropped from the Ubuntu repositories, I'm attempting to build my own .deb from the instructions here: http://article.gmane.org/gmane.comp.search.xapian.general/8855 http://beeznest.wordpress.com/2011/07/06/howto-build-your-own-binaries-of-php-xapian-bindings-for-debian/ I can only get things to progress beyond the first few seconds by leaving out 'rm debian/control', but if I do, it looks as if the Python and Ruby bindings are building and passing their versions of smoketest correctly. However, the PHP part of the build is failing with this error: /home/charlie/xapian-bindings-1.2.8/php/smoketest.php:38: include(xapian.php): failed to open stream: No such file or directory FAIL: smoketest.php There's a xapian.php file in /home/charlie/xapian-bindings-1.2.8/php/php5/ but if I copy it to /home/charlie/xapian-bindings-1.2.8/php/ or change the path to it in smoketest.php, the build fails right near the start with: dpkg-source: error: aborting due to unexpected upstream changes Unfortunately I'm out of my comfort zone building from source. Anyone got any ideas? Edit post James' answer: Builds fine if I follow instructions exactly. I built it on a test VM initially, but that didn't build the PHP package as PHP itself wasn't installed. Obvious gotcha, but worth mentioning. Installing generated the following error: Setting up php5-xapian (1.2.8-1) ... Processing triggers for libapache2-mod-php5 ... dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/libapache2-mod-php5.postinst): Permission denied ssion denied dpkg: error processing libapache2-mod-php5 (--install): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: libapache2-mod-php5 It's only a script for restarting Apache. Stopping Apache before running sudo dpkg -i php5-xapian_*.deb prevents the error. Xapian now shows up in phpinfo(). Job done. Thanks.

  Read the article

< Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >