Search Results

Search found 18024 results on 721 pages for 'ruby enterprise edition'.

Page 654/721 | < Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >

• Formatting an HP ProLiant dl380 G4

  - by i.h4d35

  I have an old HP ProLiant dl380 G4 server whose hard disk needs to be formatted. Unfortunately, I cannot seem to do so. For one, it doesn't seem to be detecting any Hard Drives attached to the Server. The Hard Disks show up in the Ctrl+A option (SCSI Configuration Utility). Also, while inserting the SmartStart CD (7.01 or 7.04), it shows a message that no logical drives are found and there aren't any options to create one. Alternately I've tried slipstreaming the SCSI Driver into the OS but that doesn't seem to be helping. Also, I have a USB Floppy drive (for the SCSI driver) but that doesn't seem to be detected. Also, directly installing the OS (MS Server 2003 Standard Edition) obviously doesn't work (shows no hard disk found) Could anyone please advise as to what other needs to be done to format my server? Also please tell me what are the possible errors/mistakes which've been made so that I can learn from them. I went through some questions here on ServerFault and the HP guides here but they weren't of much help to a n00b like me. Thanks in Advance.

  Read the article

• Is there any way to detect when nginx has completed a graceful shutdown?

  - by Daniel Vandersluis

  I have a ruby on rails application which is running on passenger and nginx, with one main webserver and multiple application servers. I am trying to update my deployment process in order to minimize (or ideally, remove) any downtime caused by the deployment. The main roadblock right now is that passenger takes some time to restart (ie. reload the application), so in order to get around this, I want to stagger my restarts so that only one app server gets restart at a time. In order to do this without losing any long running passenger processes, I am thinking I need to gracefully shutdown the app server's nginx instance, which will cause it to no longer accept new connections but continue to process the existing ones; as well, HAProxy will detect that the app server is down and route new requests to the other server. However, assuming that there is a long-running process, I am not sure how to detect when the graceful shutdown has completed so that I can start it back up. Since the shutdown is caused by sending a signal (ie. kill -QUIT $( cat /var/run/nginx.pid )), and the kill command will return immediately, I cannot combine commands (ie. kill ... && touch restarted), as the touch command will execute immediately, even if nginx hasn't completed its shutdown. Is there any good way to do this?

  Read the article

• HTPC/DVR computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Issue running 32-bit executable on 64-bit Windows

  - by David Murdoch

  I'm using wkhtmltopdf to convert HTML web pages to PDFs. This works perfectly on my 32-bit dev server [unfortunately, I can't ship my machine :-p ]. However, when I deploy to the web application's 64-bit server the following errors are displayed: (running from cmd.exe) C:\>wkhtmltopdf http://www.google.com google.pdf Loading pages (1/5) QFontEngine::loadEngine: GetTextMetrics failed () ] 10% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () ] 36% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () // ...etc.... and the PDF is created and saved... just WITHOUT text. All form-fields, images, borders, tables, divs, spans, ps, etc are rendered accurately...just void of any text at all. Server information: Windows edition: Windows Server Standard Service Pack 2 Processor: Intel Xeon E5410 @ 2.33GHz 2.33 GHz Memory: 8.00 GB System type: 64-bit Operating System Can anyone give me a clue as to what is happening and how I can fix this? Also, I wasn't sure what to tag/title this question with...so if you can think of better tags/title comment them or edit the question. :-)

  Read the article

• Cannot establish a network connect to VMWare Fusion VM

  - by twolfe18

  I am running Snow Leopard 10.6.2 (not the server edition) with VMWare Fusion 3.0.0 and I trying to get my Ubuntu 9.10 x86_64 VM working. I am using a bridged connection, and I have an internet connection FROM the Ubuntu VM (I can download updates, ping websites, etc), but I cannot connect TO the Ubuntu box from any other device on my network. I am trying to get Mongrel up on the Ubuntu VM for some Rails stuff, but it's not working. I know Mongrel/Rails is not the problem because if I start the server on the Ubuntu VM, background the process, and then wget the index page, it works. I just cannot connect to the site from another IP. I have tried using a static IP and a DHCP IP configuration on the Ubuntu VM, neither work (for incoming connections, both work for outwards). I have port scanned the Ubuntu VM, and it appears that all ports are closed. However, the Ubuntu VM does respond to pings. I noticed a similar question here: http://serverfault.com/questions/99757/setting-up-a-bridged-network-with-vmware-fusion, but no answer. Any ideas?

  Read the article

• Odd IIS FTP Failure

  - by Monkey Boson

  We're running a script on our production box that zips up our database and FTPs it to a backup box every night. Our production box is running Redhat Enterprise 5. Our backup box is running Windows XP Pro / IIS 5.1. Both machines are on the same VLAN (not sure if this is imporatant). The backup file usually clocks in at around 3GB. Every now and again (~5% of the time), the backup script fails. The shell script on the "client side" - which looks at return codes - never identifies any problem since ftp always returns 0. On the "server side", IIS writes out a log that looks like this: #Software: Microsoft Internet Information Services 5.1 #Version: 1.0 #Date: 2009-08-08 07:04:25 #Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status 07:04:25 192.168.111.235 [15]USER backup 331 0 07:04:25 192.168.111.235 [15]PASS - 230 0 07:05:54 192.168.111.235 [15]created backup_20090808.zip 426 10035 07:06:16 192.168.111.235 [15]QUIT - 426 0 Now, I know that 426 means "Connection closed, transfer aborted", which is sort-of a catch-all for "IIS was not happy". The real puzzler is the wincode: 10035 (WSAEWOULDBLOCK -- Resource temporarily unavailable). My understanding is that this code is normal when using non-blocking socket calls - which would almost certainly be used by any FTP Server implementation. My first guess that it might be a timeout issue doesn't make sense, since we're only talking about a few minutes here and the timeout was left at the default 900 s. Does anybody have any ideas about what is causing this problem, and how it may be fixed? Thanks!

  Read the article

• Windows Server 2008 32 bit & windows 7 professional SP1

  - by Harry

  I'm testing my new Windows Server 2008 32 bit edition (2 servers) as a server and Windows 7 professional 32 bit as a client. Let say one is a primary domain controller (PDC) and the other is a backup domain controller (BDC) like the old time to ease. Every setup were done in the PDC and just replicate to BDC. Didn't setup anything, just install the server with AD, DNS, DHCP, that's all. Then I use my windows 7 pro 32 bit to join the domain. It worked. After that I tried to change the password of a the user (not administrator) but it always failed said it didn't meet the password complexity setup while in fact there's no setup at all either in account policy, default domain policy or even local policy. Tried to disable the password complexity in the default domain policy instead of didn't set all then test again but still failed. Browse and found suggestion to setup the minimum and maximum password age to 0 but it also failed. Tried to restart the server and the client then change password, still failed with the same error, didn't meet password complexity setup. Tried to see in the rsop.msc but didn't found anything. In fact, if I see the setup in another system with windows server 2003 and windows xp, using rsop.msc I can see there's setup for computer configuration windows settings security settings account policies password policy. I also have a windows 7 pro 32 bit in a windows server 2003 32 bit environment but unable to find the same setting using rsop but this windows 7 works fine. anyone can give suggestion what's the problem and what to do so I can change my windows 7 pro laptop password in a windows server 2008 environment? another thing, is it the right assumption that we can see all the policies setting in windows 7 whether it's in a windows server 2003 or 2008 environment? thanks.

  Read the article

• Domain authentication over OPEN wireless pre-logon (Windows 7 Pro) - No logon servers avail

  - by Shadow00Caster

  I have a plethora of laptops that are joined to an AD domain. I have an enterprise wireless system setup, the users of these laptops will be using an OPEN unsecured SSID which will ultimately have a captive portal that uses Radius-AD auth and firewall rules to allow access pre-captive portal auth to the proper ip's/ports of DC's etc for auth etc. I already have other laptops/users connecting to another SSID with 802.11x and SSO, all works perfectly pre-logon etc. My problem is with this open network, for some reason I cannot get the machines to auth to AD. The laptops connect to the wireless network, I confirm this on the controller and can ping the laptop at startup. I sharked the wires on the 2 DC's that these machines auth to, I can see a DNS SOA update from a laptop im testing with and can ping that test laptop from both DC's. When I try to logon, "There are currently no logon servers available to service the logon request." The shark shows no incoming connections to either DC even though the laptop is connected and pingable. Any help is greatly appreciated.

  Read the article

• apache2: ssl_error_rx_record_too_long when visiting port 80? help!

  - by John

  Hi, I have an Ubuntu 10 x64 server edition machine. I got a second IP and configured /etc/network/interfaces like so (actual IPs and gateways removed): [code] auto lo iface lo inet loopback iface eth0 inet dhcp auto eth0 auto eth0:0 iface eth0 inet static address [ my first IP ] netmask 255.255.255.0 gateway [ my first gateway ] iface eth0:0 inet static address [ my second IP ] netmask 255.255.255.0 gateway [ my second gateway ] [/code] /etc/apache2/ports.conf: [code] Listen 80 NameVirtualHost [ my first IP ]:80 NameVirtualHost [ my second IP ]:80 # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 NameVirtualHost [ my first IP - some site is running SSL successfully using it ]:443 Listen 443 [/code] /etc/apache2/sites-enabled/mysite.conf: [code] ServerName mysite.com Include /var/www/mysite.com/djangoproject/apache/django.conf [/conf] [/code] Then when visiting http[mysite].com:80 or http[mysite].com (:// removed because serverfault doesn't allow me to post hyperlinks), I get: [code] An error occurred during a connection to [mysite].com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) [/code] My guess is that the configuration file is not being picked up, and apache is therefore looking for the default-ssl file, which is not in conf-enabled. If I were to configure that file properly, it seems I would successfully connect to whatever default directory is specified in the default-ssl file. But I want to connect to my website. Any ideas? Thanks in advance!

  Read the article

• Installing MySQL 5.1 on OS X 10.7 Lion

  - by xisal

  I am trying to install MySQL 5.1. I am on Lion, and when I remove all files associated with MySQL on my machine it still tells me that I have a newer version installed when I try to install it from the DMG file. Has anyone successfully installed MySQL 5.1 on Lion? I found a solution using Homebrew: Completely remove MySQL from your system (just in case) sudo rm /usr/local/mysql sudo rm -rf /usr/local/mysql* sudo rm -rf /Library/StartupItems/MySQLCOM sudo rm -rf /Library/PreferencePanes/My* vim /etc/hostconfig and removed the line MYSQLCOM=-YES- rm -rf ~/Library/PreferencePanes/My* sudo rm -rf /Library/Receipts/mysql* sudo rm -rf /Library/Receipts/MySQL* sudo rm -rf /var/db/receipts/com.mysql.* Source:http://stackoverflow.com/questions/1436425/how-do-you-uninstall-mysql-from-mac-os-x Install homebrew /usr/bin/ruby -e "$(curl -fsSL https://raw.github.com/gist/323731)" Source: https://github.com/mxcl/homebrew/wiki/installation Install MySQL 5.1 via brew brew install mysql51 if that doesn't work, do this: brew install https://raw.github.com/adamv/homebrew-alt/master/versions/mysql51.rb Source: http://stackoverflow.com/questions/4359131/brew-install-mysql-on-mac-os/6399627#6399627 Make MySQL Work Create mysql.sock file touch /tmp/mysql.sock Install MySQL default tables /usr/local/Cellar/mysql51/5.1.58/bin/mysql_install_db ...or your path Source: http://stackoverflow.com/questions/4788381/getting-cant-connect-through-socket-tmp-mysql-when-installing-mysql-on-ma/5140849#5140849

  Read the article

• How to set up ProxMox 1.9 on VPN?

  - by Gnudiff

  Disclaimer: I have only rudimentary knowledge of VPNs. I would love to learn about them properly, however, at the moment I really need to make stuff work on short notice. I am trying to set up a ProxMox virtualization platform in an existing network. The network currently consists of several servers which have VMWare free edition. There is some sort of VPN defined in switch. In order for VMWare management interface to be accessible, there needs to be ticked a checkbox in the network settings for VPN and entered the VPN id. I didn't notice any such configuration option during ProxMox installation, so my Proxmox VE on the same physical server, using same manual IP settings (ip/nm/gw), is not accessible. As I understand I should touch the Proxmox's underlying Debian config in /etc/network/interfaces, but I have no idea, what should I aim for: do I specify the settings for eth0, do I make a virtual interface? How to make it accessible for both ProxMox VE and underlying future VMs? I read the ProxMox installation guide, but unfortunately it presumes better understanding of VPNs than I have. A config template or similar would be appreciated. Thanks in advance.

  Read the article

• emacs error: "Symbol's value as variable is void: hostname"

  - by Florian Pilz

  After I installed emacs this error occurs every time on startup. It prevents me from installing plugins, e.g. auctex via aptitude. I already tried to install a plugin by hand (rails for ruby), but doesn't work. The error doesn't contain the message "hostname", but the hostname of my PC is displayed ("bloodredangel-ubuntu"). I changed my hostname to "bloodredangel", but the error message stays the same. While I changed my hostname I saw that in /etc/hostname were two entries: 127.0.0.1 bloodredangel-ubuntu I already asked this question in an ubuntu forum but they couldn't help. They recognised an misconfigured /etc/hosts file, which I corrected, but from time to time these incorrect configurations get attached by something. I didn't add them by hand, maybe it has something to do with the issue. The misconfigurations looked like this: 127.0.0.1 127.0.0.1 bloodredangel-ubuntu localhost.localdomain localhost 127.0.0.1 127.0.0.1:8080 bloodredangel-ubuntu localhost.localdomain localhost I didn't found a solution on the internet, so I hope I will find help here finally.

  Read the article

• Dual booting Linux/Win7, Grub refuses to load Win7

  - by JohnB

  Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

  Read the article

• Is 30 calls / second a lot for one IIS server?

  - by Lieven Cardoen

  We have a RIA application that 300 clients concurrently use in an intranet environment. Together they make 30 calls / second to IIS (asp.net) (actually it's 60 but calls are loadbalanced over two IIS servers). Half of the calls is getting an asset (Caching Profile is used so most of the time cache is hit), the other half is saving data to a sql server. Retrieving an asset is done with a aspx page. Saving the data happens via WebORB, asp.net and Sql Server. So some processing is needed by WebORB (amf decoding, GZIP, ...). We also use Spring.NET, and some of the container objects have a request scope (not a lot). IIS servers -- Virtual machines, 4 CPU, 2 gb RAM. They are based on Windows 2008 x64 SP2 Enterprise Edition. Sql Server 2008 is used. Apparently CPU of both IIS serers is constantly around 60-70%. Now, my question, is the load of 60-70% acceptable and how could we possible bring that down to less % (maybe using only one IIS server)? + Is 2 gb RAM enough? Assets can be up to 20mb, but on average, they are about 30kb. (the load of 60-70% is achieved with assets around 30kb). The data that gets saved with weborb is very small (2kb) and is just one object.

  Read the article

• OS X 10.6 Apply ipfw rules at startup

  - by Michael Irey

  I have a couple of firewall rules I would to like to apply at startup. I have followed the instructions from http://images.apple.com/support/security/guides/docs/SnowLeopard_Security_Config_v10.6.pdf On page 192. However, the rules do not get applied at startup. I am running 10.6.8 NON Server Edition. I can however run: (Which applies the rules correctly) sudo ipfw /etc/ipfw.conf Which results in: 00100 fwd 127.0.0.1,8080 tcp from any to any dst-port 80 in 00200 fwd 127.0.0.1,8443 tcp from any to any dst-port 443 in 65535 allow ip from any to any Here is my /etc/ipfw.conf # To get real 80 and 443 while loading vagrant vbox add fwd localhost,8080 tcp from any to any 80 in add fwd localhost,8443 tcp from any to any 443 in Here is my /Library/LaunchDaemons/ipfw.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>ipfw</string> <key>Program</key> <string>/sbin/ipfw</string> <key>ProgramArguments</key> <array> <string>/sbin/ipfw</string> <string>/etc/ipfw.conf</string> </array> <key>RunAtLoad</key> <true /> </dict> </plist> The permissions of all the files seem to be appropriate: -rw-rw-r-- 1 root wheel 151 Oct 11 14:11 /etc/ipfw.conf -rw-rw-r-- 1 root wheel 438 Oct 11 14:09 /Library/LaunchDaemons/ipfw.plist Any thoughts or ideas on what could be wrong would be very helpful!

  Read the article

• How to install a private user script in Chrome 21+?

  - by Mathias Bynens

  In Chrome 20 and older versions, you could simply open any .user.js file in Chrome and it would prompt you to install the user script. However, in Chrome 21 and up, it downloads the file instead, and displays a warning at the top saying “Extensions, apps, and user scripts can only be added from the Chrome Web Store”. The “Learn More” link points to http://support.google.com/chrome_webstore/bin/answer.py?hl=en&answer=2664769, but that page doesn’t say anything about user scripts, only about extensions in .crx format, apps, and themes. This part sounded interesting: Enterprise Administrators: You can specify URLs that are allowed to install extensions, apps, and themes directly through the ExtensionInstallSources policy. So, I ran the following commands, then restarted Chrome and Chrome Canary: defaults write com.google.Chrome ExtensionInstallSources -array "https://gist.github.com/*" defaults write com.google.Chrome.canary ExtensionInstallSources -array "https://gist.github.com/*" Sadly, these settings only seem to affect extensions, apps, and themes (as it says in the text), not user scripts. (I’ve filed a bug asking to make this setting affect user scripts as well.) Any ideas on how to install a private user script (that I don’t want to add to the Chrome Web Store) in Chrome 21+? Update: The problem was that gist.github.com’s raw URLs redirect to a different domain. So, use these commands instead: # Allow installing user scripts via GitHub or Userscripts.org defaults write com.google.Chrome ExtensionInstallSources -array "https://*.github.com/*" "http://userscripts.org/*" defaults write com.google.Chrome.canary ExtensionInstallSources -array "https://*.github.com/*" "http://userscripts.org/*" This works!

  Read the article

• cisco 2900xl - SNMP - Get mac address of device connected to an interface

  - by ankit

  Hello all, Basically what i want to do is to find out what is the mac address of a device plugged in to an interface on the switch (FastEthernet0/1 for example) reading through the switch documentaion i found out that i can configure snmp trap on it to make it notify of any new mac address the switch detects by using the command snmp-server enable traps mac-notifiction but for some reason my switch does not support this feature. the only options i see are CORE_SWITCH(config)#snmp-server enable traps ? c2900 Enable SNMP c2900 traps cluster Enable Cluster traps config Enable SNMP config traps entity Enable SNMP entity traps hsrp Enable SNMP HSRP traps snmp Enable SNMP traps vlan-membership Enable VLAN Membership traps vtp Enable SNMP VTP traps <cr> so the other way would be for me to run a cronjon on my gateway to poll the switch periodically using snmp to get new mac addresses i have looked everywhere but cant seem to find the OID that would provide me this information. any help i can get would me very much appreciated ! here's the output from "show version" on my switch Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.4)WC(1), MAINTENANCE INTERIM SOFTWARE Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Tue 10-Jul-01 11:52 by devgoyal Image text-base: 0x00003000, data-base: 0x00333CD8 ROM: Bootstrap program is C2900XL boot loader CORE_SWITCH uptime is 1 hour, 24 minutes System returned to ROM by power-on System image file is "flash:c2900XL-c3h2s-mz.120-5.4.WC.1.bin" cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory. Processor board ID FAB0409X1WS, with hardware revision 0x01 Last reset from power-on Processor is running Enterprise Edition Software Cluster command switch capable Cluster member switch capable 12 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:01:42:D0:67:00 Motherboard assembly number: 73-3397-08 Power supply part number: 34-0834-01 Motherboard serial number: FAB040843G4 Power supply serial number: DAB05030HR8 Model revision number: A0 Motherboard revision number: C0 Model number: WS-C2912-XL-EN System serial number: FAB0409X1WS Configuration register is 0xF thanks, -ankit

  Read the article

• SQL Server restore a backup results in an error.

  - by Mario

  I have a database in dev (SQL Server 2005 on Windows Server 2008) that I need to move to prod (SQL Server 2000 on Windows Server 2003). My process is as follows: Login to dev, open SQL Server Management Studio Right click on the database | Tasks | Backup. Keep all default options (full backup etc.) Move .bak file locally to prod (no network drive), login to prod, open SQL Server Enterprise Manager. Right click Databases node | All Tasks | Restore database. Change Restore as database to reflect the same database name. Click radio button 'From device'. Click 'Select Devices' Click Restore from: Add..., browse to .bak file (small - only 6mb) Now I am ready to restore the database, so I click OK and get the following error: "The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE DATABASE is terminating abnormally." This error is immediate. I have tried a few different variations of this - restoring the db to dev machine with a different db name and log file names (where it originated), creating an empty database with the same physical path to files before and trying to restore to that, making a few different .bak files and making sure they are verified before uploading them to prod. I know for a fact the directory for the .mdf and .ldf files exist on prod, though the files themselves don't exist. If, before I click OK to restore, go to the options tab instead I get the following error: Error 3241: The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE FILELIST is terminating abnormally. Anyone have any bright ideas?

  Read the article

• Using 1920x1200 mode on SyncMaster T260HD in Linux

  - by dagorym

  I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

  Read the article

• SQL Server 2005 standard filegroups / files for performance on SAN

  - by Blootac

  I submitted this to stack overflow (here) but realised it should really be on serverfault. so apologies for the incorrect and duplicate posting: Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

  Read the article

• Windows 2012 Server: Enable .NET 3.5

  - by Meengla

  I have a Windows 2012 Server which needs .NET 3.5 installed. For background info/solutions, please see this: http://sqlblog.com/blogs/sergio_govoni/archive/2013/07/13/how-to-install-netfx3-on-windows-server-2012-required-by-sql-server-2012.aspx I have tried this but it doesn't work for me. Here is what I am trying: Using a Windows 2012 ISO file, 'mount' on the 2012 Server as 'D' drive and then tried both GUI and Command prompt. In case of GUI, I specified the 'alternate source' path to the D drive's 'source/sxs folder but that failed without giving enough info. In case of the command prompt, here is what's happening: dism /online /enable-feature /featurename:NetFx3 /source:d:\sources\sxs I get error: Installed but Parent feature not enabled. So I tried another approached: dism /online /enable-feature /featurename:NetFx3 /all /source:d:\sources\sxs the above command, per http://blogs.technet.com/b/askcore/archive/2012/05/14/windows-8-and-net-framework-3-5.aspx is supposed to enable parent elements; but running this I get error like 'source not found'. Is there some error in my second command? What else I could do? This is Windows 2012 Server Standard edition. Thanks!

  Read the article

• Removing SCIM input method as default from gnome terminal

  - by Mark

  Hello - I am recently back into the Linux world after about a 10 year absence. While I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'. I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect. Can someone tell me a) what is this SCIM input method b) how can I make it so that it is not the default? I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set. I guess as a final question, can I just get rid of SCIM? Or is that tied into the window manager somehow? I do appreciate any clarifications that I can get. Thanks.

  Read the article

• SSD, AHCI and write performance

  - by Dan

  We've started to deploy SSD drives to our developers workstations. At this moment we're having the unpleasant surprise that the systems using the new SSDs often freeze, with the HDD activity led blinking or being continuously on. Benchmarks shows read speeds around 180 MB/s, but write speeds around 5 MB/s. All developers are using Windows 7 Enterprise, 64 bit, SP1. One of our developers suggested (based on his experience) the following sequence: backup the workstation use a tool to completely erase the SSD make sure AHCI is enabled in BIOS install Windows restore from backup So far, this procedure seems to work (we're still testing, but write speed seems to be 120 MB/s). There are some questions in this context: why do we have to completely reinstall Windows? Is it possible to clean the SSD without reinstalling Windows? Is there a reliable tool? If AHCI was disabled when Windows was installed and we enable it, shouldn't this be enough to correct the write performance issue? If we have to completely erase the SSDs, does this mean the SSDs we've received were used before (SH)? I'm wondering this because the package I've got was open (I didn't think about it at that time, as I considered one of my coworkers simply took a peek inside the package). Has anyone seen a similar problem before?

  Read the article

• Windows 8 & Hyper-V Can't Bridge Wifi Connection

  - by xinunix

  So I have an odd issue that I can't quite figure out... I am running Windows 8 Enterprise on a Dell 6420 laptop. I have a Broadcom 802.11n wireless adapter. I am connected to an home router (Netgear WNDR3700) that is connected to the internet. It is a very simple home network setup. I am trying to stand-up a few VMs in Hyper-V and want the VMs to be able to access the internet over my wireless connection. I have found numerous examples of how to set this up using both External and Internal Virtual Switches but have yet to be able to get it to work on my machine. I have narrowed the issue down to the fact that my host machine always loses internet connection when I bridge my wifi connection (both when it is bridged automatically by windows when I setup an external virtual switch bound to the wifi adapter or if I do it manually by creating an internal virtual switch, right click on it and my wifi network and select "Bridge Connections".) In both cases after the bridge is established, my host machine can no longer connect to the internet. I am not sure where to start with troubleshooting this problem. After the bridge is setup, an ipconfig shows all netowrk devices on the machine as "Media Disconnected". I do know that the wireless adapter is connected to the router b/c it shows the connection as active and full-strength. The only thing I can possibly think of is that this machine also has the Cisco VPN client installed on it which installs a Cisco Virtual Network Adapter. Is it possible that this Cisco Virtual Adapter is causing me issues when I try to bridge? I saw some people had a similar issue with a VirtualBox virtual adapter when trying to share via Hyper-V. Any thoughts or suggestions on how to troubleshoot?

  Read the article

• MS SQL Server 2005 Express rebuild master DB problem

  - by PaN1C_Showt1Me

  Hi ! There has been a power loss on our server and i cannot start the SQL service because the master DB is corrupted (as the log states). I found many articles recommending running the setup.exe with optional parameters: This is what I did: I've downloaded SQLEXPR32.EXE from MS page and ran it The first problem was, that it extracted all the setup files and started the default installation procedure. (which was unuseful for me as I need those params). If I canceled it, all the extracted files disappeared. That's why I decided to copy the extracted files somewhere and than cancel the default installation. Now I'm trying to run the setup.exe from the extraction: setup.exe /qb INSTANCENAME=MSSQLSERVER REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=xxxxx it asks me if I want to rewrite the system db, which is what I need, but then while installing I get this error: *An installation package for the product Microsoft SQL Server 2005 Express Edition cannot be found. Try the installation again using a valid copy of the installation package 'SqlRun_SQL.msi'* Then it tries to install something and it states: cannot install because the same instance name already exists. But I don't want to install a new instance .. Any idea how to solve this, please? Thank you in advance !

  Read the article

< Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >