Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 658/971 | < Previous Page | 654 655 656 657 658 659 660 661 662 663 664 665  | Next Page >

  • Speed up loading of test results from builds in Visual Studio

    - by Jakob Ehn
    I still see people complaining about the long time it takes to load test results from a TFS build in Visual Studio. And they make a valid point, it does take a very long time to load the test results, even for a small number of tests. The reason for this is that the test results is not just the result of the test run but also all the binaries that were part of the test run. This often also means that the debug symbols (*.pdb) will be downloaded to your local machine. This reason for this behaviour is that it letsyou re-run the tests locally. However, most of the times this is not what the developer will do, they just want to know which tests failed and why. They can then fix the tests and rerun them locally. It turns out there is a way to load only the test results, which is much faster. The only tricky bit is to find the location of the .trx file that is generated during the build. Particularly in TFS 2010 where you often have multiple build agents, which of corse results in different paths to the trx file. Note: To use this you must have read permission to the build folder on the build agent where the build was executed. Open the build result for the build Click View Log Locate the part where MSTest is invoked. When using test containers, it looks like this:   Note: You can actually search in the log window, press Ctrl+F and you will get a little search box at the bottom. Nice! On the MSTest command line call, locate the /resultsfileroot parameter, which points to the folder where the test results are stored Note that this path is local for the build server, so you need to replace the drive letter with the server name: D:\Builds\Project\TestResults to \Project\TestResults">\\<BuildServer>\Project\TestResults Double-click on the .trx file and you will notice that it loads much faster compared to opening it from the build log window

    Read the article

  • VirtualBox 3.2 is released! A Red Letter Day?

    - by Fat Bloke
    Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

    Read the article

  • Have you ever used kon-boot?

    - by Ctrl Alt D-1337
    Has anyone here ever used kon-boot? I guess it may work because of the few blog posts about it but I feel kinda concerned and am interested at hearing experiences from anyone who have used multiple times with no side effects. I am slightly worried for any direct memory altering it tries to do. I am also worried if this will do its job fine to hide the fact it puts in a low level trojan or if the author planned to do anything like that in a future release as it looks like closed source from the site. Also I don't intend to gain illegal access but I find these sort of things very useful for my box of live discs I take every where, just in case. OT: Other question that me be of interest to readers here

    Read the article

  • CodePlex Daily Summary for Tuesday, December 28, 2010

    CodePlex Daily Summary for Tuesday, December 28, 2010Popular ReleasesMonitorWang: MonitorWang v1.0.5 (Growler): What's new?Added Growl Notification Finalisers - these are interceptor components that work exclusively with the Growl Publisher. These allow you to modify the Growl Notification just prior to it being sent by the publisher. You can inject custom logic to precisely control how the Growl Notification will appear; this includes changing the Growl Priority level and message text. I've created to two Growl Notification Finalisers - one allows you to change the Growl Notification Priorty based on ...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Multicore Task Framework: MTF 1.0.2: Release 1.0.2 of Multicore Task Framework.EnhSim: EnhSim 2.2.7 ALPHA: 2.2.7 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Mongoose has bee...LINQ to Twitter: LINQ to Twitter Beta v2.0.19: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.Hammock for REST: Hammock v1.1.4: v1.1.4 ChangesOAuth fixes for post content handling, encoding, and url parameter doubling v1.1.3 ChangesAdded an event handler for use with retries Made improvements to OAuth for performance, plus additional fixes Added OAuth token refresh support Fixed memory leak in content streaming, and regression issue with async GET call response handling v1.1.2 ChangesAdded OAuth Echo native support and static helper methods on OAuthCredentials Fixes for multi-part stream writing and recovery...Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFxCop Integrator for Visual Studio 2010: FxCop Integrtor 1.1.0: New FeatureSearch violation information FxCop Integrator provides the violation search feature. You can find out specific violation information by simple search expression.Analyze with FxCop project file FxCop Integrator supports code analysis with FxCop project file. You can customize code analysis behavior (e.g. analyze specifid types only, use specific rules only, and so on). ImprovementImproved the code analysis result list to show more information (added Proejct and File column). Change...NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????(????v3.5??): XCode v6.5.2010.1223 ????,??: NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????,??C#?????? XAgent ???? NewLife.CommonEnitty ??????(???,XCode??????) XCode?? ?????????,??????????????????,?????95% XCode v3.5.2009.0714 ??,?v3.5?v6.0???????????????,?????????。v3.5???????????,??????????????。 XCoder ??XTemplate?????????,????????XCode??? XCoder_Src ???????(????XTemplate????),??????????????????MiniTwitter: 1.64: MiniTwitter 1.64 ???? ?? 1.63 ??? URL ??????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...SSH.NET Library: 2010.12.23: This release includes some bug fixes and few new fetures. Fixes Allow to retrieve big directory structures ssh-dss algorithm is fixed Populate sftp file attributes New Features Support for passhrase when private key is used Support added for diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256 and diffie-hellman-group-exchange-sha1 key exchange algorithms Allow to provide multiple key files for authentication Add support for "keyboard-interactive" authentication method...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...Media Companion: Media Companion 3.400: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. A manual is included to get you startedWindows Media Player GNTP Plugin: WMP-GNTP v1.0.5: This is the installer for WMP-GNTP. Install it to get the plugin on your system.Google Geo Kit: Static Google Map WinForm Control Nightly Build: 12/22/2010 MD5sum - b8118c9970d6dc9480fe7c41f042537f add event OnGMapNotDefined. When anything went wrong in StaticGmap internally and return null stream, this event will be firedSilverlight Sockets Sample: No binaries: Whole source code in a ZIP. Shame 'Source Code' tab isn't working, so I'll just upload a ZIP.New ProjectsAsfMojo: AsfMojo is an open source .NET ASF parsing library, providing support for parsing WMA audio and WMV video files. It offers classes to create streams from packet data within a media file, gather file statistics and extract audio segments or frame accurate still frames.asp.net ajax file manager: Features : Full Ajax Support security View Image Create folder Delete file & folder Copy file & folder Move file & folder multiple selection ( Ctrl + Select ) Easy installation and configuration Open source. compatible IE7,IE8,FF,Safari,Chrome http://www.filemanager.3ntar.netBoxNet: BoxNet is a opensource library which will provide possibility for Windows Phone 7 developers to integrate with DropBox.C# Sqlite For WP7: C# Sqlite Port for Windows phone 7 and possibly Silverlight 3, 4. The core engine was slightly modified to be used with IsolatedStorage and SqliteClient were ported by using missing codes from Mono project in order to maximize usability and portability from desktop.Comparison of Managed Compression Algorithms: Visual Studio 2010 Console Test Harness with samples of MiniLZO, QuickLz, SharpZipLib, iRolz and other managed compression classes. Tests compression of a 2MB Word file and shows timings. Useful in deciding what type of compression to use. Developers can easily add their own.Cypher Bot 2011: Cypher Bot 2011 Brings the word cipher to a whole new level. You can now easily open, save, print, and send ciphers. Make a short message or completly encrypt a document. The cipher is impossible to figure out unless you have the keyword and algorithm to solve it! Try it out!Directed Graph for .NET: This project presents a simple directed graph implementation for the .NET framework using C# language.DynamicAccess: DynamicAccess is a library to aid connecting DLR languages such as ironpython and ironruby to non-dynamic languages like managed C++. It also fills in some gaps in the current C# support of dynamic objects, such as member access by string and deletion of members or indexes.Euro for Windows XP: A simple tool and sample to change Estonian currency from Estonian Krone (kr) to Euro (€). Applies to all versions of Windows and from .NET 2.0 which is default build. The sample creates a custom locale and updates existing users through Registry.Excel PowerShell Console: An Excel AddIn to enable using PowerShell for Excel automation.fantastic: fantasticGomarket Toolbar: GoMarket FireFox toolbarjs: jsLiving Agile's Common Framework: This project is a collection of commonly used routines here at Living Agile. There are a lot of helpful extension methods, logging, configuration and threading utilities. All other Living Agile projects have a dependency on this project.MapWindow 4: MapWindow4 is a free windows GIS application and uses an ActiveX control at it's core that can be embedded into many applications that don't support .Net such as excel, access, visual basic 6, or other pre-.Net languages.Mdelete API: Delete all files and directores in windows shell. Support long path (less then 32000 chars) and network path (eg. \\server\share or \\127.0.0.1\share)OP-Code SyntaxEditor: OP-Code SyntaxEditor is a Windows Forms Control, similar to a multi-line TextBox, which syntax highlights text and provides some features for code editing.passion: passionSharpHighlighter: SharpHighlighter is an extension for Visual Studio; a fairly simple code highlighter for C# I made it for anyone who wants to download and learn how to create is own parser or Syntax Highlighter. This sample will highlight only C# classes and structs but it's quite extensible.Test Center Locator: Test center locator makes it easier to find closest toefl or Ielts test center

    Read the article

  • Cisco IOS ACL types

    - by cjavapro
    The built in command help list displays access list types based on which range. router1(config)#access-list ? <1-99> IP standard access list <100-199> IP extended access list <1100-1199> Extended 48-bit MAC address access list <1300-1999> IP standard access list (expanded range) <200-299> Protocol type-code access list <2000-2699> IP extended access list (expanded range) <700-799> 48-bit MAC address access list dynamic-extended Extend the dynamic ACL absolute timer rate-limit Simple rate-limit specific access list router1(config)# What are each of the types? Can multiple types of ACLs be applied to a given interface?

    Read the article

  • Is your TRY worth catching?

    - by Maria Zakourdaev
      A very useful error handling TRY/CATCH construct is widely used to catch all execution errors  that do not close the database connection. The biggest downside is that in the case of multiple errors the TRY/CATCH mechanism will only catch the last error. An example of this can be seen during a standard restore operation. In this example I attempt to perform a restore from a file that no longer exists. Two errors are being fired: 3201 and 3013: Assuming that we are using the TRY and CATCH construct, the ERROR_MESSAGE() function will catch the last message only: To workaround this problem you can prepare a temporary table that will receive the statement output. Execute the statement inside the xp_cmdshell stored procedure, connect back to the SQL Server using the command line utility sqlcmd and redirect it's output into the previously created temp table.  After receiving the output, you will need to parse it to understand whether the statement has finished successfully or failed. It’s quite easy to accomplish as long as you know which statement was executed. In the case of generic executions you can query the output table and search for words like“Msg%Level%State%” that are usually a part of the error message.Furthermore, you don’t need TRY/CATCH in the above workaround, since the xp_cmdshell procedure always finishes successfully and you can decide whether to fire the RAISERROR statement or not. Yours, Maria

    Read the article

  • How do I remove the "Shutdown" menu entry from Gnome's system menu?

    - by nathan
    We have a lab with multiple RedHat EL5 machines running the Gnome desktop environment. When developers are done using the machine sometimes they miss the logout button and click the Shutdown button by mistake (easy to do, I've done it myself). Needless to say, for those remoted into the lab it's sometimes devastating. Is there a way to remove the Shutdown entry for all users from the Gnome menu? Note: I do not mean Shutdown on the greeter, but the Shutdown button on the menu drop down that is next to logout, sleep, etc.

    Read the article

  • how to configure Firefox to automatically reuse the login credentials like IE

    - by Black Eagle
    Multiple HTTP Authentication Prompts in Firefox We are currently working on porting our application from Internet Explorer to Firefox and the application currently uses HTTP Digest Authentication. In case of Internet Explorer, the popup dialog to enter the Username/password appears only once and the entered login credentials are reused for subsequent HTTP requests to the web server. However in case of Firefox, the Authentication popups appears whenever the request is made to the Web Server. The Web Server used is Emweb Server. We would like to know how to configure Firefox to automatically reuse the login credentials like IE.

    Read the article

  • Demantra 7.3.1.3 Controlling MDP_MATRIX Combinations Assigned to Forecasting Tasks Using TargetTaskSize

    - by user702295
    New 7.3.1.3 parameter: TargetTaskSize Old parameter: BranchID  Multiple, deprecated  7.3.1.3 onwards Parameter Location: Parameters > System Parameters > Engine > Proport   Default: 0   Engine Mode: Both   Details: Specifies how many MDP_MATRIX combinations the analytical engine attempts to assign to each forecasting task.  Allocation will be affected by forecsat tree branch size.  TaskTargetSize is automcatically calculated.  It holds the perferred branch size, in number of combinations in the lowest level. This parameter is adjusted to a lower value for smaller schemas, depending on the number of available engines.   - As the forecast is generated the engine goes up the tree using max_fore_level and not top_level -1.  Max_fore_level has     to be less than or equal to top_level -1.  Due to this requirement, combinations falling under the same top level -1     member must be in the same task.  A member of the top level -1 of the forecast tree is known as a branch.  An engine     task is therefore comprised of one or more branches.     - Reveal current task size       go to Engine Administrator --> View --> Branch Information and run the application on your Demantra schema.  This will be deprecated in 7.3.1.3 since there is no longer a means of adjusting the brach size directly.  The focus is now on proper hierarchy / forecast design.     - Control of tasks       The number of tasks created is the lowest of number of branches, as defined by top level -1 members in forecast       tree, and engine sessions and the value of TargetTaskSize.  You are used to using the branch multiplier in this       calculation.  As of 7.3.1.3, the branch ID multiple is deprecated.     - Discovery of current branch size       To resolve this you must review the 2nd highest level in the forecast tree (below highest/highest) as this is the       level which determines the size of the branches.  If a few resulting tasks are too large it is recommended that       the forecast tree level driving branches be revised or at times completely removed from the forecast tree.     - Control of foreacast tree branch size         - Run the following sql to determine how even the branches are being split by the engine:             select count(*),branch_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by branch_id;             This will give you an understanding if some of the individual branches have an unusually large number of           rows and thus might indicate that the engine is not efficiently dividing up the parallel tasks.         - Based on the results of this sql, we may want to adjust the branch id multiplier and/or the number of engines           (both of these settings are found in the Engine Administrator)           select count(*), level_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by level_id;           This will give us an understanding at which level of the Forecast tree where the forecast is being generated.            Having a majority of combinations higher on the forecast tree might indicate either a poorly designed forecast           tree and/or engine parameters that are too strict           Based on the results of this we would adjust the Forecast Tree to see if choosing a different hierarchy might           produce a forecast, with more combinations, at a lower level.           For example:             - Review the 2nd highest level in the forecast tree, below highest/highest, as this is the level which               determines the size of the branches.             - If a few resulting tasks are too large it is recommended that the forecast tree level driving branches               be revised or at times completely removed from the forecast tree.               - For example, if the highest level of the forecast tree is set to Brand/All Locations.             - You have 10 brands but 2 of the brands account for 67% and 29% of all combinations.             - There is a distinct possibility that the tasks resulting from these 2 branches will be too large for               a single engine to process.  Some possible solutions could be to remove the Brand level and instead               use a different product grouping which has a more even distribution, possibly Product Group.               - It is also possible to add a location dimension to this forecast tree level, for example Customer.                This will also reduce forecast tree branch size and will deliver a balanced task allocation.             - A correctly configured Forecast Tree is something that is done by the Implementation team and is               not the responsibility of Oracle Support.  Allocation will be affected by forecast tree branch size.  When TargetTaskSize is set to 0, the default value, the system automatically calculates a value for 'TargetTaskSize' depending on the number of engines.   - QUESTION:  Does this mean that if TargetTaskSize is 1, we use tree branch size to allocate branches to tasks instead                of automatically calculating the size?     ANSWER: DEV Strongly recommends that the setting of TargetTaskSize remain at the DEFAULT of ZERO (0).   - How to control the number of engines?     Determine how many CPUs are on the machine(s) that is (are) running the engine.  As mentioned earlier, the general     rule is that you should designate 2 engines per each CPU that is available.  So for example, if you are running the     engine on a machine that has 4 CPU then you can have up to 8 engines designated in the Engine Administrator.  In this     type of architecture then instead of having one 'localhost' in your Engine Settings Screen, you would have 'localhost'     repeated eight times in this field.     Where do I set the number of engines?                 To add multiples computers where engine will run, please do a back-up of Settings.xml file under         Analytical Engines\bin\ folder, then edit it and add there the selected machines.                 Example, this will allow 3 engines to start:         - <Entry>           <Key argument="ComputerNames" />           <Value type="string" argument="localhost,localhost,localhost" />           </Entry Otherwise, if there are no additional engines defined, the calculated value of 'TargetTaskSize' is used. (Oracle does not recommend changing the default value.) The TargetTaskSize holds the engines prefered branch size, in number of level 1 combinations.   - Level 1 combinations, known as group size The engine manager will use this parameter to attempt creating branches with similar size.   * The engine manager will not create engines that do not have a branch. The engine divider algorithm uses the value of 'TargetTaskSize' as a system-preferred branch size to create branches that are more equal in size which improves engine performance.  The engine divider will try to add as many tasks as possible to an existing branch, up to the limit of 'TargetTaskSize' level 1 combinations, before adding new branches. Coming up next: - The engine divider - Group size - Level 1 combinations - MAX_FORE_LEVEL - Engine Parameters  

    Read the article

  • Dual Boot, Dual Hard Drives!

    - by Mars
    I'm posting this question after reading most of similar ones. My situation is different here in the fact that I'm installing on SSD and not partitioning my HDD, and that I can actually boot! I'm just looking to improve the convenience of having easier way to choose. 1- I have a Dell Inspiron 15R SE. It has HDD (1TB) and SSD (32GB). I managed to do whatever things I did in distant past to set the SSD free (I don't really care how fast my system boots). Now I wanted to install Linux on the SSD and leave the HDD untouched. It's way too precious for me to mess with it. So, I repartitioned the SSD to: 30GB for /root, 1GB for /swap, and 100MB for /boot. I installed Linux on the root and the GRUB on boot (of the SSD). Now GRUB immediately boots into linux and doesn't allow me to boot to Windows. BUT! If I enable UEFI Boot manager and choose "Windows Boot Manager" after hitting F12, I can boot into Windows 8 normally. I'd say that's pretty ok, except, I'd prefer to have the option to boot into which one or at the very least, default to boot to Windows. 2- I'm concerned that if I now delete the SSD partition, that the boot will break and I won't be able to boot anything! Does this seem like a valid concern? I made that choice of having linux on SSD because I'm going to be training on it, so I expect multiple resets from time to time.

    Read the article

  • Displaying possible movement tiles

    - by Ash Blue
    What's the fastest way to highlight all possible movement tiles for a player on a square grid? Players can only move up, down, left, right. Tiles can cost more than one movement, multiple levels are available to move, and players can be larger than one tile. Think of games like Fire Emblem, Front Mission, and XCOM. My first thought was to recursively search for connecting tiles. This quickly demonstrated many shortcomings when blockers, movement costs, and other features were added into the mix. My second thought was to use an A* pathfinding algorithm to check all tiles presumed valid. Presumed valid tiles would come from an algorithm that generates a diamond of tiles from the player's speed (see example here http://jsfiddle.net/truefreestyle/Suww8/9/). Problem is this seems a little slow and expensive. Is there a faster way? Edit: In Lua for Corona SDK, I integrated the following movement generation controller. I've linked to a Gist here because the solution is around 90 lines of code. https://gist.github.com/ashblue/5546009

    Read the article

  • Redirect with .htacess - URL with regex to URL

    - by nicorellius
    I have a temporary need to redirect some installer files on my web site. The redirects that are working now look something like this: Redirect 301 /installer_1.0.0.zip http://www.example.com/download/installer_1.0.3.zip Redirect 301 /installer_1.0.1.zip http://www.example.com/download/installer_1.0.3.zip Redirect 301 /installer_1.0.2.zip http://www.example.com/download/installer_1.0.3.zip I would like to use a regex instead of having multiple lines for each version I need to redirect. I have tried these options with no success: Redirect 301 /installer_(.*).zip http://www.example.com/download/installer_1.0.3.zip Redirect 301 /installer_([0-9+]\.[0-9+]\.[0-9+]).zip http://www.example.com/download/installer_1.0.3.zip Should these work or am I doing something wrong? Thanks.

    Read the article

  • Need data on disk drive management by OS: getting base I/O unit size, "sync" option, Direct Memory A

    - by Richard T
    Hello All, I want to ensure I have done all I can to configure a system's disks for serious database use. The three areas I know of (any others?) to be concerned about are: I/O size: the database engine and disk's native size should either match, or the database's native I/O size should be a multiple of the disk's native I/O size. Disks that are capable of Direct Memory Access (eg. IDE) should be configured for it. When a disk says it has written data persistently, it must be so! No keeping it in cache and lying about it. I have been looking for information on how to ensure these are so for CENTOS and Ubuntu, but can't seem to find anything at all! I want to be able to check these things and change them if needed. Any and all input appreciated.

    Read the article

  • Method for spawning enemies according to player score and game time

    - by Sun
    I'm making a top-down shooter and want to scale the difficulty of the game according to what the score is and how much time has Passed. Along with this, I want to spawn enemies in different patterns and increase the intervals at which these enemies are shown. I'm going for a similar effect to Geometry wars. However, I can think of a to do this other than have multiple if-else statments, e.g. : if (score > 1000) { //spawn x amount if enemies } else if (score > 10000) { //spawn x amount of enemy type 1 & 2 } else if (score > 15000) { //spawn x amount of enemy type 1 & 2 & 3 } else if (score > 25000) { //spawn x amount of enemy type 1 & 2 & 3 //create patterns with enemies } ...etc What would be a better method of spawning enemies as I have described?

    Read the article

  • How to reverse-i-search back and forth?

    - by m-ric
    I use reverse-i-search often, and that's cool. Sometime though when pressing Ctrl+r multiple times, I pass the command I am actually looking for. Because Ctrl+r searches backward in history, from newest to oldest, I have to: cancel, search again and stop exactly at the command, without passing it. While in reverse-i-search prompt, is it possible to search forward, i.e. from where I stand to newest. I naively tried Ctrl+shift+r, no luck. I heard about Ctrl+g but this is not what I am expecting here. Anyone has an idea?

    Read the article

  • CodePlex Daily Summary for Monday, July 22, 2013

    CodePlex Daily Summary for Monday, July 22, 2013Popular ReleasesAndroidCopyAndPaste: Capood: Erstes Release für Evaluation --> Changeset 26675fastJSON: v2.0.17: 2.0.17 - added serialization of static fields and properties - added dynamic object support and testKartris Ecommerce ASP.NET Shopping Cart: Kartris v2.5002: This is the release version of Kartris with the responsive interface based on Zurb's Foundation framework. It will work on any screen size, down to and including mobile devices such as the iphone. We've also fixed issues with Apple iOS products being treated by ASP.NET as 'downscale' devices, which broke some functionality in Kartris. This release also includes native Bitcoin support (no third party services required - it communicates directly with the standard Bitcoin client via a JSON API)...VG-Ripper & PG-Ripper: PG-Ripper 1.4.15: changes NEW: Added Support for "ImgChili.net" links NEW: Added Support for "ImgBabes.com" linksAcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/MISAO: Ver. 5.33: Latest app and add-insC# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes..NET Code Migrator for Dynamics CRM: v1.0.12: Combined the main macros, generated macros from a sample organization, and the CreateVisualStudioMacros utility into a single package.DARF: Dynamic Application Runtime Framework: DARF.Demo: This demo is DARF.IDE application plus a sample file (calculator.xda) which describes a very simple calculator. All you need to do is to unzip the package, run DARF.IDE.exe and load calculator.xda then press F5 or select 'Execute' from 'Code' menu to see the execution of the application. The calculator.xda file is fully commented so you can inspect the file and get a feeling of the way DARF works. This sample application makes use of some pre-written blocks (namely button, textbox and ...) ...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...CodeGen Code Generator: CodeGen 4.2.11: Changes in this release include: Added several new alternate forms of the <FIELD_SELWND> token to provide template developers better control over the case of field selection window names. Also added a new token <FIELD_SELWND_ORIGINAL> to preserve the case of selection window names in the same way that <FIELD_SELWND> used to. Enhanced UI Toolkit window script selection window processing (-ws) so that selection window names are no longer case sensitive (they aren't in UI Toolkit). Also the -w...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...New ProjectsAssociativy Tag Nodes: Lightweight Associativy nodes that behave somewhat like tags.CESQLite2013: SQLite for Windows Embedded Compact 2013: A project to provide SQLite.dll for x86 Windows Embedded Compact 2013cmsserver: ????,HTTP??DDRMenu Extension for Ventrian Simple Gallery: The aim of this project is to include inside the DDRMenu all the gallery availables as subitem of the page they are onto.Devanagari Keyboard: Windows Marathi, Devanagari Keyboard Software by Nitin SawantFastMessages. MSG.Exe Alternative. Easily send messages to desktop: Easily send messages to desktop. A simple command (FastMessage.exe) acts as an alternative to MSG.EXE into scripts. Destinations can be domain users or groups.GameTools: ??????,?????????Memory Teaser Game: It is a game written in C sharp .NET version 4.5.RegEdit for Windows Embedded Compact (Windows CE): Registry editor for Windows Embedded Compact (Windows CE).Scripter: Scripter is designed to handle client side activities consumed by a websiteStartingwithServiceBusCSharp: this project is a very basic introduction to start developing using Windows Azure Service Bus using Brokered, queue messaging.Team 2 Collaboration: Whaddup!VM Project Generator Release: Generator Abrevieri Viorel MadaWatcher Orchard module: Orchard module for watching content items and geting notified on modifications.Workout Tracker: Simple workout tracker.zendigh php framework: zendigh is open source php framework to create high traffic websites.

    Read the article

  • Android threads trouble wrapping my head around design

    - by semajhan
    I am having trouble wrapping my head around game design. On the android platform, I have an activity and set its content view with a custom surface view. The custom surface view acts as my panel and I create instances of all classes and do all the drawing and calculation in there. Question: Should I instead create the instances of other classes in my activity? Now I create a custom thread class that handles the game loop. Question: How do I use this one class in all my activities? Or do I have to create a separate thread each time? In my previous game, I had multiple levels that had to create an instance of the thread class and in the thread class I had to set constructor methods for each separate level and in the loop use a switch statement to check which level it needs to render and update. Sorry if that sounds confusing. I just want to know if the method I am using is inefficient (which it probably is) and how to go about designing it the correct way. I have read many tutorials out there and I am still having lots of trouble with this particular topic. Maybe a link to a some tutorials that explain this? Thanks.

    Read the article

  • Controlling access to site folders if you cannot user Roles

    - by DavidMadden
    I find myself on an assignment where I could not use System.Web.Security.Roles.  That meant that I could not use Visual Studio's Website | ASP.NET Configuration.  I had to go about things another way.  The clues were in these two websites:http://www.csharpaspnetarticles.com/2009/02/formsauthentication-ticket-roles-aspnet.htmlhttp://msdn.microsoft.com/en-us/library/b6x6shw7(v=VS.71).aspxhttp://msdn.microsoft.com/en-us/library/b6x6shw7(v=VS.71).aspxYou can set in your web.config the restrictions on folders without having to set the restrictions in multiple folders through their own web.config file.  In my main default.aspx file in my protected subfolder off my main site, I did the following code due to MultiFormAuthentication (MFA) providing the security to this point:        string role = string.Empty;         if (((Login)Session["Login"]).UserLevelID > 3)         {             role = "PowerUser";         }         else         {             role = "Newbie";         }         FormsAuthenticationTicket ticket =  new FormsAuthenticationTicket( 1,                 ((Login)Session["Login"]).UserID,                 DateTime.Now,                 DateTime.Now.AddMinutes(20),                 false,                 role,                 FormsAuthentication.FormsCookiePath);         string hashCookies = FormsAuthentication.Encrypt(ticket);         HttpCookie cookie =  new HttpCookie(FormsAuthentication.FormsCookieName, hashCookies);         Response.Cookies.Add(cookie); This all gave me the ability to change restrictions on folders without having to restart the website or having to do any hard coding.

    Read the article

  • Ghosting context menu clicks in WinXP

    - by Swish
    Let me preface by saying I have a lot of windows open most of the time, although not resource intensive ones, just browsers, ssh sessions, a music player, FTP client, Notepad++, IM clkients, etc. Anyway, I get a lot of weird visual "ghosting" type effects. For example when right-clicking and then selecting an option from a context menu the selected item will remain in view until I right click somewhere on the desktop. Same thing happens when selecting items from the File, Edit, etc. menu in various programs. I'm assuming this is just a result of a less than high quality video card (NVIDIA GeForce FX 5200), all the other hardware in the machine is newer higher quality, that specific video card was added after the fact for multiple monitors. I have looked all over the web for solutions and have increased the number of GDI handles for Windows, reduced the hardware accelaration on the card, etc. Any suggestions other than replace the card?

    Read the article

  • Detecting Units on a Grid

    - by hammythepig
    I am making a little turn based strategy game in pygame, that uses a grid system as the main map to hold all the characters and the map layout. (Similar to Fire Emblem, or Advance Wars) I am trying to determine a way to quickly and efficiently (i.e. without too much of a slow down) check if there are any characters within a given range of the currently selected character. So to illustrate: O = currently selected character X = squares within range Range of 1: X X O X X Range of 2: X X X X X X O X X X X X X Range of 3: X X X X X X X X X X X X O X X X X X X X X X X X X Now I have to tell the user who is in range, and I have to let the user choose who to attack if there are multiple enemies in range. If I have a 5x5 grid, filled with " " for empty and numbers for the characters: [ ][ ][ ][ ][4] [ ][1][ ][ ][ ] [ ][ ][ ][ ][ ] [ ][ ][2][3][ ] [ ][ ][ ][ ][ ] Depending on which character the user selects, I would like to show the user which other characters are in range. So if they all had a range of 3: 1 can hit 2 2 can hit 1 or 3 3 can hit 2 4 cannot hit anyone. So, How do I quickly and/or efficiently run though my grid and tell the user where the enemies are? PS- As a bonus, if someone could give an answer that could also work for a minimum distance type range, I would give them a pat on the back and a high five, should they ever travel to Canada and we ever meet in life. For example: Range of 3 to 5: (- is out of range) X X X X X X X X X X X X - X X X X X X - - - X X X X X X - - O - - X X X X X X - - - X X X X X X - X X X X X X X X X X X X

    Read the article

  • How do I delete a differential backup?

    - by BlueMonkMN
    I often like to create backups when testing the software I work on, and will sometimes create a differential backup if I want to be able to get back to multiple previous states. However, sometimes I realize that I forgot one thing I wanted to include in a differential backup, or I no longer need a previous differential backup. Sometimes I simply want to create a new scenario from the original base image and start working with a new series of differential backups. So I'd like to be able to delete some older differential backups so I don't get confused about which ones I'm using. But I can't find any way to delete just the differential backups, selectively or all at once.

    Read the article

  • Pushing complete notifications to client

    - by ton.yeung
    So with cqrs, we accept that consistency is eventual. However, that doesn't mean that the user has to continually poll, or that eventual means an update has to take more then 500ms to sync. For the sake of UX, we want to at least give the illusion of consistency, or if not possible, be as transparent as possible. With that in mind, I have this setup: angularjs web client, consumes webapi restful services, sends commands to nservicebus command handlers, saves to neventstore, dispatches events to nservicebus event handlers, sends message to signalr hub, sends notifications to angularjs web client so with that setup, theoretically some initiates a request the server validates the request sends out the necessary commands In the mean time the client gets a 200 response updates the view: working on it gets message sometime later: done, here's the updated data Here's where things get interesting, each command could spawn multiple events. Not sure if this is a serious no, no, or not, but that's how it is currently. For example, a new customer spawns CustomerIDCreated, CustomerNameUpdated, CustomerAddressUpdated, etc... Which event handler needs to notify the client? Should all of them in a progress bar style update?

    Read the article

  • Oracle Delivers Special Recognition for Specialized Partners

    - by michaela.seika(at)oracle.com
    Since announcing Oracle PartnerNetwork Specialized (OPN Specialized) in October 2009, Oracle has been focused on building a program that first enables solution providers to become highly skilled Oracle partners who deliver value to customers and that then recognizes and rewards their achievements in a meaningful way. Today the company unveiled new benefits reserved for partners who have achieved one or more of the over 50 specializations currently available. The benefits demonstrate Oracle's commitment to showcase these valued partners to three key audiences: customers, other partners, and Oracle employees.With today's launch of www.oracle.com/specialized Oracle has taken what IDC believes is a first of its kind approach to putting top partners front and center with customers and prospects. While most vendors offer a business partner finder tool on their website none has gone as far as Oracle with the creation of this new site dedicated to the promotion of Specialized Partners. The tag lines - "Recognized by Oracle, Preferred by Customers" and "Specialized. Recognized. Preferred." gets right to the point - these are the solution providers with which customers should choose to engage. The contents of the page offer multiple proof points to justify the marketing phrases.One of the benefits Oracle offers its Specialized Partners is video creation and placement. While Oracle works with partners to create informal or "guerilla" videos which often are placed on YouTube to generate awareness and buzz, the company also produces professional videos for its partners. The greatest value the partner receives from this benefit isn't the non-trivial production costs that Oracle covers but instead the prominent exposure Oracle gives the finished product. Partner videos are featured on www.oracle.com/specialized, used as part of monthly OPN Specialized Partners monthly webcasts, placed on a customer facing website, the Oracle Media Network, which includes several partner sites such as PartnerCast. A solution provider gains a great deal of credibility when they can send a prospect to an Oracle website where they are featured. Read the full article here.

    Read the article

  • Custom Session Management using HashTable

    - by kaleidoscope
    ASP.NET session state lets you associate a server-side string or object dictionary containing state data with a particular HTTP client session. A session is defined as a series of requests issued by the same client within a certain period of time, and is managed by associating a session ID with each unique client. The ID is supplied by the client on each request, either in a cookie or as a special fragment of the request URL. The session data is stored on the server side in one of the supported session state stores, which include in-process memory, SQL Server™ database, and the ASP.NET State Server service. The latter two modes enable session state to be shared among multiple Web servers on a Web farm and do not require server affinity. Implement Custom session Handler you need to follow following process : 1. Create class library which will inherit from  SessionStateStoreProviderBase abstract Class. 2. Implement all abstract Method in your base class. 3.Change Mode of session to “Custom” in web.config file and provide Provider as your Namespace with classname. <sessionState mode=”Custom” customProvider=”Namespace.classname”> <Providers> <add name=”Name” type=”Namespace.classname”> </sessionstate> For more Details Please refer following links :   http://msdn.microsoft.com/en-us/magazine/cc163730.aspx http://msdn.microsoft.com/en-us/library/system.web.sessionstate.sessionstatestoreproviderbase.aspx - Chandraprakash, S Technorati Tags: Chandraprakash,Session state Managment

    Read the article

  • GSL Uniform Random Number Generator

    - by Jamaia
    I want to use GSL's uniform random number generator. On their website, they include this sample code: #include <stdio.h> #include <gsl/gsl_rng.h> int main (void) { const gsl_rng_type * T; gsl_rng * r; int i, n = 10; gsl_rng_env_setup(); T = gsl_rng_default; r = gsl_rng_alloc (T); for (i = 0; i < n; i++) { double u = gsl_rng_uniform (r); printf ("%.5f\n", u); } gsl_rng_free (r); return 0; } However, this does not rely on any seed and so, the same random numbers will be produced each time. They also specify the following: The generator itself can be changed using the environment variable GSL_RNG_TYPE. Here is the output of the program using a seed value of 123 and the multiple-recursive generator mrg, $ GSL_RNG_SEED=123 GSL_RNG_TYPE=mrg ./a.out But I don't understand how to implement this. Any ideas as to what modifications I can make to the above code to incorporate the seed?

    Read the article

< Previous Page | 654 655 656 657 658 659 660 661 662 663 664 665  | Next Page >