Search Results

Search found 2609 results on 105 pages for 'htc hd 7'.

Page 66/105 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• Linux and GeForce 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

  Read the article

• Can't Use Switchable Graphics

  - by Rev

  I can't get my switchable graphics cards working on my Acer 4820TG laptop. It came installed with Windows 7, but I've installed the RTM build of Windows 8. I have to keep the "Graphics" setting on the BIOS set to "Discrete," if it's set to "Switchable" the screen turns black after the boot animation is complete. The machine has an Intel graphics card and an AMD Mobility Radeon HD 5650, and I know that the Intel card is working. I've seen it work a couple of times with Windows 8 installed, but for some reason it just doesn't anymore. I know that it's not broken, because when I plug in a secondary monitor, and move the cursor to the right, I can see it on that monitor. Are there drivers or something I need to install? I've tried a number of drivers and utilities from Acer's website, none of which have fixed the problem.

  Read the article

• Ubuntu OpenLDAP and Mac OS X Roaming Profiles

  - by Sam Hammamy

  Today, I'm installing OpenLDAP on Ubuntu 11.04. I have gone through the installation before a few times, but what I have never been able to do is use Mac OSX Lion's Directory Utility to administer the LDAP server, and also never got roaming profiles working. SO the question is: 1) Is there a configuration I need in OpenLDAP so I can administer it remotely. I vaguely remember something like that, but I can't find the answer online. 2) What do I need to setup roaming profiles for a mac os x. I'd like to backup all my laptop data to the LDAP's machine, and potentially, also backup with time machine to an external HD mounted no the Ubutnu machine (but that's a few days ahead of time for now).

  Read the article

• Missing graphics accelerator for Toshiba C855D-s5232

  - by user2387429

  I formatted the drive and re-installed Windows 7 64-bit on a Toshiba Satellite C855D-S5232. Now I am missing the graphics accelerator. I have been to Toshiba's website but cannot find the right one. Same is so for AMD. It has AMD E1-1200 APU with Radeon HD Graphics. The machine is recognizing a standard VGA. I ordered a recovery disk on eBay and it was supposed to be here yesterday. Can anyone help with other options?

  Read the article

• fdisk -l shows a partition is not in /dev directory

  - by zitronic

  I am having troubles on mounting my ntfs hard drive on linux. I am running ophcrack live CD. fdisk shows me the hard drive I have installed on my computer fdisk -l Disk /dev/hdc: 30.0 GB, 30005821440 bytes 255 heads, 63 sectors/track, 3648 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 3647 29294496 7 HPFS/NTFS but I dont have that device on my /dev directory so I can not mount it ls /dev/hd* /dev/hda /dev/hda4 /dev/hda8 /dev/hdb2 /dev/hdb6 /dev/hdc /dev/hda1 /dev/hda5 /dev/hda9 /dev/hdb3 /dev/hdb7 /dev/hdd /dev/hda2 /dev/hda6 /dev/hdb /dev/hdb4 /dev/hdb8 /dev/hda3 /dev/hda7 /dev/hdb1 /dev/hdb5 /dev/hdb9 What could be going on_

  Read the article

• Windows 8.1 unable to play Music or the Audio from videos through Optical Out

  - by Zion Fox

  I am having an issue with my audio output, where any music file, and the audio side of videos are not being played through my optical audio output. I am running a Realtek HD Audio device built on Revision 1.0 on a GA-P55A-UD6 Gigabyte Board, which runs through it's optical output to an Astro A40 Mixamp, which does some upscaling before sending it to the headset. Now, notification sounds, and sounds/videos/music played through the browser or programs like Skype or games are working fine. This seems to specifically effect Foobar2000 and Media Player Classic. I have updated these two programs to their latest revisions, in addition to the soundcard drivers to no avail, and searching the error code thrown by Foobar2000: Unrecoverable playback error: The parameter is incorrect. (0x80070057) through Google returns not very helpful results, other than the one potentially mentioning DRM. This issue I am having a very hard time resolving, and am wondering if anyone here has experienced similar issues after updating.

  Read the article

• How to copy directories using debugfs?

  - by tjbp

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• Dedicated GPU in Dell PowerEdge C1100

  - by Eli Gundry

  We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

  Read the article

• Ubuntu Not Starting After Installing Software Updates

  - by Prabhu

  I just did a software update on my Ubuntu 9.10, after that it asked me to restart my system which i did and once i did that, grub opend some simple bash shell or something... i dont know how do i run ubuntu now??? Ubuntu 9.10 was installed 1 week back using the wubi installer... which is like a one click install from windows... it is installed on the same partition as winxp... i chose 12 gb hd space while installing ubuntu.. it was working good for 1 week... i decided to do the software updates today morning and now its not even starting!!!

  Read the article

• powertop keeps telling me to turn off the same thing, over and over

  - by Rory McCann

  I am running an ubuntu lucid laptop on battery. I want to make my power last as long as possible. Aswell as the normal things like turn down screen brightness, and turn off wifi, I'm using powertop. It will sometimes tell me things, e.g.: Suggestion: Enable USB autosuspend by pressing the U key OK, I press the U key to do that. However a few minutes later it will give me the same suggestion, it's as if it never enabled USB autosuspend the first time. It does this for other things aswell, not just USB autosuspend. e.g. it'll give me this message frequently: An audio device is active 100.0% of the time: hwC0D1 LSI ID 1040 Q - Quit R - Refresh A - Turn HD audio powersave on Is there anything I can do to make these choices 'stick'? Or do I have some unfortunatle hardware that won't obey linux? (If so, is there any way to confirm this?)

  Read the article

• Raid0 performance degradation?

  - by davy8

  Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

  Read the article

• Raid0 performance degradation?

  - by davy8

  Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

  Read the article

• Computer POST's and draws the BIOS screens very slowly - Motherboard issue?

  - by Ssvarc

  I have a desktop that refuses to boot into Windows. I used Hitachi DFT and the HD came back OK. I then used Memtest86+ and it took hours for the test to run. After 8+ hours it was up to test number 6. I aborted and ran Memtest86. It ran at basically the same speed. I aborted and went to look at the BIOS settings. The computer is running slow at POST. It takes a long time for the keyboard to be recognized, etc. The BIOS settings takes time to be (slowly) drawn on the screen. What could be causing such behavior? EDIT: I gave back the computer a while back without ever discovering the cause so I'm closing the question.

  Read the article

• OS X Snow Leopard fails to boot after upgrade to 10.6.1

  - by pixeline

  I'm a fairly recent mac user. Been using windows for decades and happily switched. But i upgraded from 10.6 to 10.6.1 last night and the upgrade looks like it failed. I restarted the machine when it asked to then went to bed. In the morning the computer was still trying to shut itself off. So i forced the shutdown, restarted, but now i'm stuck with the loading spinner. What can i do? UPDATE: Verbose didn't show anything interesting. i also did the hardware test. Nothing comes up wrong. Disk utility did not find any error on the HD. But, it did show a fatal error when checking permissions.

  Read the article

• No GUI after upgrade to Ubuntu 9.10 (boots to command line)

  - by Gathris

  I have just upgraded to Ubuntu 9.10 (network upgrade using the update manager, from 9.04 which had different graphics related problems) and when I try to boot into it all I get a small Ubuntu logo, flickering text and then the tty1 command line with a logon prompt. startx gives following error: Fatal server error: no screens found I traced down a tutorial that said I needed the latest graphics drivers (Gigabyte ATI Radeon 4650 HD installed with 9.10 catalyst drivers) so I did using the 'sh' command and a USB stick (I have a working Windows partition) and it installed fine but did not fix the problem. Edit: Thanks to UK and Arjan van Bentem below I was able to understand the full error message of start x: Parse error on lone 2 of /etc/X11/xorg.conf 'nameserver' is not a valid keyword in this section Fatal server error: no screens found This has nothing to do with a graphical error (sorry if I misled anyone) but the xorg.conf file has 3 lines in it and lines 2-3 have an entry 'nameserver'. Using the nano command I commented out (using a # before the entries) the nameservers and can now boot Ubuntu. Thanks to everyone for their help.

  Read the article

• VMWare Workstation Performance

  - by tekiegreg

  Hi there, awhile ago I upgraded my laptop to Windows 7 x64 from Windows XP 32 bit edition. However not before virtualizing the physical installation and I continue to run it under VMWare Workstation today. The performance on the resulting VM is just absolutely atrocious! I've done a lot of uninstalling stuff that's not longer needed since the machine is virtual in an effort to reduce RAM, but in general the responsiveness seems sluggish. I also run the Virtual Machine on it's own separate HD that is seldom used by the host OS. I'm just hoping for some general tips in increasing VMWare performance anywhere, thoughts? EDIT: Both of the below answers were excellent starting points for me. However I did like the selected answer's strategies on disk management. I am running the Virtual Machine in a separate external hard disk, likely I'm going to have to reconfigure somehow. Thanks all!

  Read the article

• Can the NVIDIA ION chipset handle streaming and gaming reasonable well?

  - by true_gritt

  I'm considering getting a small-footprint "nettop" computer to use as a home theater PC with my Samsung LN40A550 HDTV. I've been looking at systems like the AS Rock ION HT330, the Acer AspireRevo 3610, or the Asus EeeBox PC EB1501. These are all systems with NVIDIA ION chipset (Intel Atom N330 dual core CPU + NVIDIA GeForce 9400 GPU). Is the NVIDIA ION chipset powerful enough to support media streaming at HD resolutions (e.g. via Boxee, Hulu, Netflix) and casual gaming (e.g. World of Warcraft, Madden NFL) reasonably well without herky-jerky video output?

  Read the article

• How do I get VDPAU working with Ubuntu 9.1?

  - by Brad Robertson

  What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

  Read the article

• Unable to mount portable hard drive on Ubuntu

  - by VoY

  My portable hard drive (WD My Passport), which used to work correctly now does not automount on my Ubuntu system. It does work on a Windows machine or even when plugged into WD HD TV, which is a Linux based device. There's one NTFS partition spanning the whole drive. When I plug the disk in, I see the following in dmesg: [269259.504631] usb 1-2.2: new high speed USB device using ehci_hcd and address 20 [269259.604674] usb 1-2.2: configuration #1 chosen from 1 choice However it does not mount in GNOME and I don't see it when I type: sudo fdisk -l Any suggestions why this might be? I repaired the partition using chkdsk on Windows, so the issue is probably not filesystem related.

  Read the article

• asus eee pc 1018p os installation

  - by cornerback84

  My friend has an asus eee pc 1018p. It has no cd/dvd drive (neither do he have a usb cd/dvd drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But midway to installation it was interrupted and the computer was restarted (not h/w or s/w issue but we did it). Now we cannot run the backup and we also tried to install windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs usb device driver to continue. It has USB 3.0 maybe thats why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't runs and when booting from USB it says that it needs device driver. Anyone has any idea what we should do?

  Read the article

• Copying Firefox profile

  - by ChrisW

  My computer (well, Windows XP) failed. I got everything off the HD, including my Firefox profile, which I especially wanted because I had lots of open unsaved tabs in my current session (yes, I know that's bad practice!), but also to rescue bookmarks etc. I've now got Windows 7, and reinstalled Firefox. I've read the instructions on the Firefox website about creating new profiles, and I'm not sure they're very intuitive. It says that you can copy all the contents from an old profile into a new 'default' one, which I have done (http://support.mozilla.org/en-US/kb/back-and-restore-information-Firefox-profiles). However, when I open Firefox, the data from this profile isn't being used and Firefox doesn't seem to recognise the data that's there. What am I doing wrong?!

  Read the article

• My External USB drive stops after reading some data

  - by user191542

  I had the external USB 3.0 western Digital My Book essential 3TB drive. I had loto of data on it. Suddenlt when i start copying data from it then after reading 20GB or so data then i get error that system can't read from the location. I have to turn the uSB power off , disconnect it and then again connect it. so i have to trnasfer the data in small chunks like 20Gb , 30GB etc. I have n ow transferred all the data but i want to know that is hard disk gone or it can be fixed or its something windows fault not HD fault

  Read the article

• What is the S.M.A.R.T. page?

  - by Mads Skjern

  I've just listened to Steve Gibson talk about his SpinRite software, on the Security Now podcast episode 336 (transscript). At 33:20 he says: I can show and do show on the SMART page that sectors are being relocated and that errors are being corrected. That SMART analysis page sometimes scares people because it shows, wait a minute, this thing says we're correcting so many errors per megabyte. What is this SMART page? 1) Some information saved on the HD by SMART, that I can access with a SMART tool like smartmontools? 2) A page (tab) in his SpinRite software? In any case, can I see, in any way, what sectors are marked as bad, without using SpinRite? Preferably using smartmontools!

  Read the article

• Laptop Touch-pad stops working after reattaching parts

  - by kb67

  I was trying to replace my LCD screen for the first time, and it was a very hard process to do. I had to unscrew everything from the bottom of the laptop (Ram, HD, etc) and detach everything that was under the keyboard. After reattaching the LCD, putting everything back together, the touch-pad has stop working. Everything works except for that. Anybody know why it stopped working? I have an HP G61-429WM Laptop. Sorry if this was the wrong place to ask.

  Read the article

• Triple ghost animated cursor

  - by R G A

  Since installing the driver for Intuos 4 Graphics tablet, animated cursors display as a triple ghost cursor. I cannot find any reference to this problem elsewhere. System specifications: new Dell XPS, Windows 7, ATI Mobility Radeon HD 4670. Graphics tablet and graphics software are virtually useless since the cursor hotspot is nearly impossible to identify. All drivers and software are current. Any thoughts? Vendors deny any knowledge or responsibility. Removing the Intuos driver does not fix this.

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >