Search Results

Search found 16987 results on 680 pages for 'second'.

Page 661/680 | < Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668  | Next Page >

  • How do I make java wait for boolean to run funciton

    - by TWeeKeD
    I'm sure this is pretty simple but I can't figure out and it sucks I'm up on suck on (what should be) an easy step. ok. I have a method that runs one function that give a response. this method actually handles the uploading of the file so o it takes a second to give a response. I need this response in the following method. sendPicMsg needs to complete and then forward it's response to sendMessage. Please help. b1.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { if(!uploadMsgPic.equalsIgnoreCase("")){ Log.v("response","Pic in storage"); sendPicMsg(); sendMessage(); }else{ sendMessage(); } 1st Method public void sendPicMsg(){ Log.v("response", "sendPicMsg Loaded"); if(!uploadMsgPic.equalsIgnoreCase("")){ final SharedPreferences preferences = this.getActivity().getSharedPreferences("MyPreferences", getActivity().MODE_PRIVATE); AsyncHttpClient client3 = new AsyncHttpClient(); RequestParams params3 = new RequestParams(); File file = new File(uploadMsgPic); try { File f = new File(uploadMsgPic.replace(".", "1.")); f.createNewFile(); //Convert bitmap to byte array Bitmap bitmap = decodeFile(file,400); ByteArrayOutputStream bos = new ByteArrayOutputStream(); bitmap.compress(CompressFormat.PNG, 0 /*ignored for PNG*/, bos); byte[] bitmapdata = bos.toByteArray(); //write the bytes in file FileOutputStream fos = new FileOutputStream(f); fos.write(bitmapdata); params3.put("file", f); } catch (FileNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } params3.put("email", preferences.getString("loggedin_user", "")); params3.put("webversion", "1"); client3.post("http://peekatu.com/apiweb/msgPic_upload.php",params3, new AsyncHttpResponseHandler() { @Override public void onSuccess(String response) { Log.v("response", "Upload Complete"); refreshChat(); //responseString = response; Log.v("response","msgPic has been uploaded"+response); //parseChatMessages(response); response=picurl; uploadMsgPic = ""; if(picurl!=null){ Log.v("response","picurl is set"); } if(picurl==null){ Log.v("response", "picurl no ready"); }; } }); sendMessage(); } } 2nd Method public void sendMessage(){ final SharedPreferences preferences = this.getActivity().getSharedPreferences("MyPreferences", getActivity().MODE_PRIVATE); if(preferences.getString("Username", "").length()<=0){ editText1.setText(""); Toast.makeText(this.getActivity(), "Please Login to send messages.", 2); return; } AsyncHttpClient client = new AsyncHttpClient(); RequestParams params = new RequestParams(); if(type.equalsIgnoreCase("3")){ params.put("toid",user); params.put("action", "sendprivate"); }else{ params.put("room", preferences.getString("selected_room", "Adult Lobby")); params.put("action", "insert"); } Log.v("response", "Sending message "+editText1.getText().toString()); params.put("message",editText1.getText().toString() ); params.put("media", picurl); params.put("email", preferences.getString("loggedin_user", "")); params.put("webversion", "1"); client.post("http://peekatu.com/apiweb/messagetest.php",params, new AsyncHttpResponseHandler() { @Override public void onSuccess(String response) { refreshChat(); //responseString = response; Log.v("response", response); //parseChatMessages(response); if(picurl!=null) Log.v("response", picurl); } }); editText1.setText(""); lv.setSelection(adapter.getCount() - 1); }

    Read the article

  • How to make MySQL utilize available system resources, or find "the real problem"?

    - by anonymous coward
    This is a MySQL 5.0.26 server, running on SuSE Enterprise 10. This may be a Serverfault question. The web user interface that uses these particular queries (below) is showing sometimes 30+, even up to 120+ seconds at the worst, to generate the pages involved. On development, when the queries are run alone, they take up to 20 seconds on the first run (with no query cache enabled) but anywhere from 2 to 7 seconds after that - I assume because the tables and indexes involved have been placed into ram. From what I can tell, the longest load times are caused by Read/Update Locking. These are MyISAM tables. So it looks like a long update comes in, followed by a couple 7 second queries, and they're just adding up. And I'm fine with that explanation. What I'm not fine with is that MySQL doesn't appear to be utilizing the hardware it's on, and while the bottleneck seems to be the database, I can't understand why. I would say "throw more hardware at it", but we did and it doesn't appear to have changed the situation. Viewing a 'top' during the slowest times never shows much cpu or memory utilization by mysqld, as if the server is having no trouble at all - but then, why are the queries taking so long? How can I make MySQL use the crap out of this hardware, or find out what I'm doing wrong? Extra Details: On the "Memory Health" tab in the MySQL Administrator (for Windows), the Key Buffer is less than 1/8th used - so all the indexes should be in RAM. I can provide a screen shot of any graphs that might help. So desperate to fix this issue. Suffice it to say, there is legacy code "generating" these queries, and they're pretty much stuck the way they are. I have tried every combination of Indexes on the tables involved, but any suggestions are welcome. Here's the current Create Table statement from development (the 'experimental' key I have added, seems to help a little, for the example query only): CREATE TABLE `registration_task` ( `id` varchar(36) NOT NULL default '', `date_entered` datetime NOT NULL default '0000-00-00 00:00:00', `date_modified` datetime NOT NULL default '0000-00-00 00:00:00', `assigned_user_id` varchar(36) default NULL, `modified_user_id` varchar(36) default NULL, `created_by` varchar(36) default NULL, `name` varchar(80) NOT NULL default '', `status` varchar(255) default NULL, `date_due` date default NULL, `time_due` time default NULL, `date_start` date default NULL, `time_start` time default NULL, `parent_id` varchar(36) NOT NULL default '', `priority` varchar(255) NOT NULL default '9', `description` text, `order_number` int(11) default '1', `task_number` int(11) default NULL, `depends_on_id` varchar(36) default NULL, `milestone_flag` varchar(255) default NULL, `estimated_effort` int(11) default NULL, `actual_effort` int(11) default NULL, `utilization` int(11) default '100', `percent_complete` int(11) default '0', `deleted` tinyint(1) NOT NULL default '0', `wf_task_id` varchar(36) default '0', `reg_field` varchar(8) default '', `date_offset` int(11) default '0', `date_source` varchar(10) default '', `date_completed` date default '0000-00-00', `completed_id` varchar(36) default NULL, `original_name` varchar(80) default NULL, PRIMARY KEY (`id`), KEY `idx_reg_task_p` (`deleted`,`parent_id`), KEY `By_Assignee` (`assigned_user_id`,`deleted`), KEY `status_assignee` (`status`,`deleted`), KEY `experimental` (`deleted`,`status`,`assigned_user_id`,`parent_id`,`date_due`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 And one of the ridiculous queries in question: SELECT users.user_name assigned_user_name, registration.FIELD001 parent_name, registration_task.status status, registration_task.date_modified date_modified, registration_task.date_due date_due, registration.FIELD240 assigned_wf, if(LENGTH(registration_task.description)>0,1,0) has_description, registration_task.* FROM registration_task LEFT JOIN users ON registration_task.assigned_user_id=users.id LEFT JOIN registration ON registration_task.parent_id=registration.id where (registration_task.status != 'Completed' AND registration.FIELD001 LIKE '%' AND registration_task.name LIKE '%' AND registration.FIELD060 LIKE 'GN001472%') AND registration_task.deleted=0 ORDER BY date_due asc LIMIT 0,20; my.cnf - '[mysqld]' section. [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking key_buffer = 384M max_allowed_packet = 100M table_cache = 2048 sort_buffer_size = 2M net_buffer_length = 100M read_buffer_size = 2M read_rnd_buffer_size = 160M myisam_sort_buffer_size = 128M query_cache_size = 16M query_cache_limit = 1M EXPLAIN above query, without additional index: +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ | 1 | SIMPLE | registration_task | ref | idx_reg_task_p,status_assignee | idx_reg_task_p | 1 | const | 1067354 | Using where; Using filesort | | 1 | SIMPLE | registration | eq_ref | PRIMARY,gbl | PRIMARY | 8 | sugarcrm401.registration_task.parent_id | 1 | Using where | | 1 | SIMPLE | users | ref | PRIMARY | PRIMARY | 38 | sugarcrm401.registration_task.assigned_user_id | 1 | | +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ EXPLAIN above query, with 'experimental' index: +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+ | 1 | SIMPLE | registration_task | range | idx_reg_task_p,status_assignee,NewIndex1,tcg_experimental | tcg_experimental | 259 | NULL | 103345 | Using where; Using filesort | | 1 | SIMPLE | registration | eq_ref | PRIMARY,gbl | PRIMARY | 8 | sugarcrm401.registration_task.parent_id | 1 | Using where | | 1 | SIMPLE | users | ref | PRIMARY | PRIMARY | 38 | sugarcrm401.registration_task.assigned_user_id | 1 | | +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+

    Read the article

  • JQuery Checkbox with Textbox Validation

    - by Volrath
    I am using Jorn's validation plugin. I have a a group of checkboxes beside a group of textboxes. The textboxes are disabled by default and will enable when the matching checkbox is checked. At least 1 checkbox has to be checked which is not a problem. However, when I check more than 2 checkboxes only 1 textbox validates. The form still submits even when the second checkbox is empty. $count = 0; while($row = mysql_fetch_array($rs)) { ?> <tr> <td> <label> <input type="checkbox" name="tDays[]" id="tDays<?php echo $count; ?>" value="<?php echo $row['promoDayID'];?>" onClick="enableTxt();" <?php if((isset($arrTDays) && in_array_THours($row['promoDayID'], $arrTDays)) || (!empty($arrSelectedTHours) && in_array_THours($row['promoDayID'], $arrSelectedTHours))) { echo "checked='checked'"; }?> validate="required:true" /> <?php echo $row['promoDay'];?>: </label> </td> <td align="right"> <input type="textbox" size="45" style="font-size:12px" name="tHours[]" id="tHours<?php echo $count; ?>" <?php if(isset($arrTDays) && in_array_THours($row['promoDayID'], $arrTDays)) { echo "value='" .getHours($row['promoDayID'], $arrTDays) ."'"; } elseif (!empty($arrSelectedTHours) && in_array_THours($row['promoDayID'], $arrSelectedTHours)) { echo "value='" .getHours($row['promoDayID'], $arrSelectedTHours). "'"; } else { echo "value='' disabled='disabled'"; }?> class="required" /> <label for="tHours[]" class="error" id="tHourserror<?php echo $count; ?>">Please enter the Trading Hour.</label> </td> </tr> <?php $count++; }//while ?> This is done using javascript: function enableTxt() { for (i = 0; i <= 7; i++) { if (document.getElementById("tDays" + i) != null && document.getElementById("tDays" + i).checked == true) { document.getElementById('tHours' + i).disabled = false; document.getElementById('tHourserror' + i).style.visibility = "visible"; } else if (document.getElementById("tDays" + i) != null) { document.getElementById('tHours' + i).disabled = "disabled"; document.getElementById('tHours' + i).value = ""; document.getElementById('tHourserror' + i).style.visibility = "hidden"; } } } Please kindly advise in detail as to how this problem can be solved. I am fairly weak in JQuery.

    Read the article

  • Same source, multiple targets with different resources (Visual Studio .Net 2008)

    - by Mike Bell
    A set of software products differ only by their resource strings, binary resources, and by the strings / graphics / product keys used by their Visual Studio Setup projects. What is the best way to create, organize, and maintain them? i.e. All the products essentially consist of the same core functionality customized by graphics, strings, and other resource data to form each product. Imagine you are creating a set of products like "Excel for Bankers", Excel for Gardeners", "Excel for CEOs", etc. Each product has the the same functionality, but differs in name, graphics, help files, included templates etc. The environment in which these are being built is: vanilla Windows.Forms / Visual Studio 2008 / C# / .Net. The ideal solution would be easy to maintain. e.g. If I introduce a new string / new resource projects I haven't added the resource to should fail at compile time, not run time. (And subsequent localization of the products should also be feasible). Hopefully I've missed the blindingly-obvious and easy way of doing all this. What is it? ============ Clarification(s) ================ By "product" I mean the package of software that gets installed by the installer and sold to the end user. Currently I have one solution, consisting of multiple projects, (including a Setup project), which builds a set of assemblies and create a single installer. What I need to produce are multiple products/installers, all with similar functionality, which are built from the same set of assemblies but differ in the set of resources used by one of the assemblies. What's the best way of doing this? ------------ The 95% Solution ----------------- Based upon Daminen_the_unbeliever's answer, a resource file per configuration can be achieved as follows: Create a class library project ("Satellite"). Delete the default .cs file and add a folder ("Default") Create a resource file in the folder "MyResources" Properties - set CustomToolNamespace to something appropriate (e.g. "XXX") Make sure the access modifier for the resources is "Public". Add the resources. Edit the source code. Refer to the resources in your code as XXX.MyResources.ResourceName) Create Configurations for each product variant ("ConfigN") For each product variant, create a folder ("VariantN") Copy and Paste the MyResources file into each VariantN folder Unload the "Satellite" project, and edit the .csproj file For each "VariantN/MyResources" <Compile> or <EmbeddedResource> tag, add a Condition="'$(Configuration)' == 'ConfigN'" attribute. Save, Reload the .csproj, and you're done... This creates a per-configuration resource file, which can (presumably) be further localized. Compile error messages are produced for any configuration that where a a resource is missing. The resource files can be localized using the standard method (create a second resources file (MyResources.fr.resx) and edit .csproj as before). The reason this is a 95% solution is that resources used to initialize forms (e.g. Form Titles, button texts) can't be easily handled in the same manner - the easiest approach seems to be to overwrite these with values from the satellite assembly.

    Read the article

  • How to reserve public API to internal usage in .NET?

    - by mark
    Dear ladies and sirs. Let me first present the case, which will explain my question. This is going to be a bit long, so I apologize in advance :-). I have objects and collections, which should support the Merge API (it is my custom API, the signature of which is immaterial for this question). This API must be internal, meaning only my framework should be allowed to invoke it. However, derived types should be able to override the basic implementation. The natural way to implement this pattern as I see it, is this: The Merge API is declared as part of some internal interface, let us say IMergeable. Because the interface is internal, derived types would not be able to implement it directly. Rather they must inherit it from a common base type. So, a common base type is introduced, which would implement the IMergeable interface explicitly, where the interface methods delegate to respective protected virtual methods, providing the default implementation. This way the API is only callable by my framework, but derived types may override the default implementation. The following code snippet demonstrates the concept: internal interface IMergeable { void Merge(object obj); } public class BaseFrameworkObject : IMergeable { protected virtual void Merge(object obj) { // The default implementation. } void IMergeable.Merge(object obj) { Merge(obj); } } public class SomeThirdPartyObject : BaseFrameworkObject { protected override void Merge(object obj) { // A derived type implementation. } } All is fine, provided a single common base type suffices, which is usually true for non collection types. The thing is that collections must be mergeable as well. Collections do not play nicely with the presented concept, because developers do not develop collections from the scratch. There are predefined implementations - observable, filtered, compound, read-only, remove-only, ordered, god-knows-what, ... They may be developed from scratch in-house, but once finished, they serve wide range of products and should never be tailored to some specific product. Which means, that either: they do not implement the IMergeable interface at all, because it is internal to some product the scope of the IMergeable interface is raised to public and the API becomes open and callable by all. Let us refer to these collections as standard collections. Anyway, the first option screws my framework, because now each possible standard collection type has to be paired with the respective framework version, augmenting the standard with the IMergeable interface implementation - this is so bad, I am not even considering it. The second option breaks the framework as well, because the IMergeable interface should be internal for a reason (whatever it is) and now this interface has to open to all. So what to do? My solution is this. make IMergeable public API, but add an extra parameter to the Merge method, I call it a security token. The interface implementation may check that the token references some internal object, which is never exposed to the outside. If this is the case, then the method was called from within the framework, otherwise - some outside API consumer attempted to invoke it and so the implementation can blow up with a SecurityException. Here is the modified code snippet demonstrating this concept: internal static class InternalApi { internal static readonly object Token = new object(); } public interface IMergeable { void Merge(object obj, object token); } public class BaseFrameworkObject : IMergeable { protected virtual void Merge(object obj) { // The default implementation. } public void Merge(object obj, object token) { if (!object.ReferenceEquals(token, InternalApi.Token)) { throw new SecurityException("bla bla bla"); } Merge(obj); } } public class SomeThirdPartyObject : BaseFrameworkObject { protected override void Merge(object obj) { // A derived type implementation. } } Of course, this is less explicit than having an internally scoped interface and the check is moved from the compile time to run time, yet this is the best I could come up with. Now, I have a gut feeling that there is a better way to solve the problem I have presented. I do not know, may be using some standard Code Access Security features? I have only vague understanding of it, but can LinkDemand attribute be somehow related to it? Anyway, I would like to hear other opinions. Thanks.

    Read the article

  • How to convet a string to pieces with PHP or regex?

    - by shin
    I have different outputs of $slider['image']and two examples are followings. The first one has and at the beginning and at the end. In the second one, all img tag has and tags. <p><img src="../../assets/images/prints/print2_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageA_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageB_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageC_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageD_600x300.gif" alt="" width="600" height="300"></p> or <p><img src="../../assets/images/prints/print2_600x300.gif" alt="" width="600" height="300"></p><p><img src="../../../assets/images/support_images/imageA_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageB_600x300.gif" alt="" width="600" height="300"></p><p><img src="../../../assets/images/support_images/imageC_600x300.gif" alt="" width="600" height="300"></p><p><img src="../../../assets/images/support_images/imageD_600x300.gif" alt="" width="600" height="300"></p> I need to change this to the following. <li><span>Homepage</span><a href="#"><img alt="" src="assets/images/prints/print2_600x300.gif" /></a></li> <li><span>Content Page</span><a href="#"><img alt="" src="assets/images/support_images/imageA_600x300.gif" /></a></li> <li><span>Dropdown Menu</span><a href="#"><img alt="" src="assets/images/support_images/imageB_600x300.gif" /></a></li> <li><span>Comments List</span><a href="#"><img alt="" src="assets/images/support_images/imageC_600x300.gif" /></a></li> <li><span>Comment Form</span><a href="#"><img alt="" src="assets/images/support_images/imageD_600x300.gif" /></a></li> I assume I may need regex and php (explode, str_replace, foreach)for this but I need some help. I appreciate your inputs and help. Thanks in advance. Full out put. [0] =>; Array ( [id] => 12 [name] => Print 2 [shortdesc] => <p>Print 2 short description</p> [longdesc] => <p>Print 2 long description</p> [thumbnail] => <p><img src="../../assets/images/prints/thumbnails/print2_223x112.gif" alt="" width="223" height="112"></p> [image] =&gt; <p><img src="../../assets/images/prints/print2_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageA_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageB_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageC_600x300.gif" alt="" width="600" height="300"><img src="../../../assets/images/support_images/imageD_600x300.gif" alt="" width="600" height="300"></p> [product_order] => 0 [class] => [grouping] => [status] => active [category_id] => 5 [featured] => front [other_feature] => none [price] => 0.00 )

    Read the article

  • Problems with Asynchronous UDP Sockets

    - by ihatenetworkcoding
    Hi, I'm struggling a bit with socket programming (something I'm not at all familiar with) and I can't find anything which helps from google or MSDN (awful). Apologies for the length of this. Basically I have an existing service which recieves and responds to requests over UDP. I can't change this at all. I also have a client within my webapp which dispatches and listens for responses to that service. The existing client I've been given is a singleton which creates a socket and an array of response slots, and then creates a background thread with an infinite looping method that makes "sock.Receive()" calls and pushes the data received into the slot array. All kinds of things about this seem wrong to me and the infinite thread breaks my unit testing so I'm trying to replace this service with one which makes it's it's send/receives asynchronously instead. Point 1: Is this the right approach? I want a non-blocking, scalable, thread-safe service. My first attempt is roughly like this, which sort of worked but the data I got back was always shorter than expected (i.e. the buffer did not have the number of bytes requested) and seemed to throw exceptions when processed. private Socket MyPreConfiguredSocket; public object Query() { //build a request this.MyPreConfiguredSocket.SendTo(MYREQUEST, packet.Length, SocketFlags.Multicast, this._target); IAsyncResult h = this._sock.BeginReceiveFrom(response, 0, BUFFER_SIZE, SocketFlags.None, ref this._target, new AsyncCallback(ARecieve), this._sock); if (!h.AsyncWaitHandle.WaitOne(TIMEOUT)) { throw new Exception("Timed out"); } //process response data (always shortened) } private void ARecieve (IAsyncResult result) { int bytesreceived = (result as Socket).EndReceiveFrom(result, ref this._target); } My second attempt was based on more google trawling and this recursive pattern I frequently saw, but this version always times out! It never gets to ARecieve. public object Query() { //build a request this.MyPreConfiguredSocket.SendTo(MYREQUEST, packet.Length, SocketFlags.Multicast, this._target); State s = new State(this.MyPreConfiguredSocket); this.MyPreConfiguredSocket.BeginReceiveFrom(s.Buffer, 0, BUFFER_SIZE, SocketFlags.None, ref this._target, new AsyncCallback(ARecieve), s); if (!s.Flag.WaitOne(10000)) { throw new Exception("Timed out"); } //always thrown //process response data } private void ARecieve (IAsyncResult result) { //never gets here! State s = (result as State); int bytesreceived = s.Sock.EndReceiveFrom(result, ref this._target); if (bytesreceived > 0) { s.Received += bytesreceived; this._sock.BeginReceiveFrom(s.Buffer, s.Received, BUFFER_SIZE, SocketFlags.None, ref this._target, new AsyncCallback(ARecieve), s); } else { s.Flag.Set(); } } private class State { public State(Socket sock) { this._sock = sock; this._buffer = new byte[BUFFER_SIZE]; this._buffer.Initialize(); } public Socket Sock; public byte[] Buffer; public ManualResetEvent Flag = new ManualResetEvent(false); public int Received = 0; } Point 2: So clearly I'm getting something quite wrong. Point 3: I'm not sure if I'm going about this right. How does the data coming from the remote service even get to the right listening thread? Do I need to create a socket per request? Out of my comfort zone here. Need help.

    Read the article

  • nil object in view when building objects on two different associations

    - by Shako
    Hello all. I'm relatively new to Ruby on Rails so please don't mind my newbie level! I have following models: class Paintingdescription < ActiveRecord::Base belongs_to :paintings belongs_to :languages end class Paintingtitle < ActiveRecord::Base belongs_to :paintings belongs_to :languages end class Painting < ActiveRecord::Base has_many :paintingtitles, :dependent => :destroy has_many :paintingdescriptions, :dependent => :destroy has_many :languages, :through => :paintingdescriptions has_many :languages, :through => :paintingtitles end class Language < ActiveRecord::Base has_many :paintingtitles, :dependent => :nullify has_many :paintingdescriptions, :dependent => :nullify has_many :paintings, :through => :paintingtitles has_many :paintings, :through => :paintingdescriptions end In my painting new/edit view, I would like to show the painting details, together with its title and description in each of the languages, so I can store the translation of those field. In order to build the languagetitle and languagedescription records for my painting and each of the languages, I wrote following code in the new method of my Paintings_controller.rb: @temp_languages = @languages @languages.size.times{@painting.paintingtitles.build} @painting.paintingtitles.each do |paintingtitle| paintingtitle.language_id = @temp_languages[0].id @temp_languages.slice!(0) end @temp_languages = @languages @languages.size.times{@painting.paintingdescriptions.build} @painting.paintingdescriptions.each do |paintingdescription| paintingdescription.language_id = @temp_languages[0].id @temp_languages.slice!(0) end In form partial which I call in the new/edit view, I have <% form_for @painting, :html => { :multipart => true} do |f| %> ... <% languages.each do |language| %> <p> <%= label language, language.name %> <% paintingtitle = @painting.paintingtitles[counter] %> <% new_or_existing = paintingtitle.new_record? ? 'new' : 'new' %> <% prefix = "painting[#{new_or_existing}_title_attributes][]" %> <% fields_for prefix, paintingtitle do |paintingtitle_form| %> <%= paintingtitle_form.hidden_field :language_id%> <%= f.label :title %><br /> <%= paintingtitle_form.text_field :title%> <% end %> <% paintingdescription = @painting.paintingdescriptions[counter] %> <% new_or_existing = paintingdescription.new_record? ? 'new' : 'new' %> <% prefix = "painting[#{new_or_existing}_title_attributes][]" %> <% fields_for prefix, paintingdescription do |paintingdescription_form| %> <%= paintingdescription_form.hidden_field :language_id%> <%= f.label :description %><br /> <%= paintingdescription_form.text_field :description %> <% end %> </p> <% counter += 1 %> <% end %> ... <% end %> But, when running the code, ruby encounters a nil object when evaluating paintingdescription.new_record?: You have a nil object when you didn't expect it! You might have expected an instance of ActiveRecord::Base. The error occurred while evaluating nil.new_record? However, if I change the order in which I a) build the paintingtitles and painting descriptions in the paintings_controller new method and b) show the paintingtitles and painting descriptions in the form partial then I get the nil on the paintingtitles.new_record? call. I always get the nil for the objects I build in second place. The ones I build first aren't nil in my view. Is it possible that I cannot build objects for 2 different associations at the same time? Or am I missing something else? Thanks in advance!

    Read the article

  • Javascript auto calculating

    - by Josh
    I have page that automatically calculates a Total by entering digits into the fields or pressing the Plus or Minus buttons. I need to add a second input after the Total that automatically divides the total by 25. Here is the working code with no JavaScript value for the division part of the code: <html> <head> <script language="text/javascript"> function Calc(className){ var elements = document.getElementsByClassName(className); var total = 0; for(var i = 0; i < elements.length; ++i){ total += parseFloat(elements[i].value); } document.form0.total.value = total; } function addone(field) { field.value = Number(field.value) + 1; Calc('add'); } function subtractone(field) { field.value = Number(field.value) - 1; Calc('add'); } </script> </head> <body> <form name="form0" id="form0"> 1: <input type="text" name="box1" id="box1" class="add" value="0" onKeyUp="Calc('add')" onChange="updatesum()" onClick="this.focus();this.select();" /> <input type="button" value=" + " onclick="addone(box1);"> <input type="button" value=" - " onclick="subtractone(box1);"> <br /> 2: <input type="text" name="box2" id="box2" class="add" value="0" onKeyUp="Calc('add')" onClick="this.focus();this.select();" /> <input type="button" value=" + " onclick="addone(box2);"> <input type="button" value=" - " onclick="subtractone(box2);"> <br /> 3: <input type="text" name="box3" id="box3" class="add" value="0" onKeyUp="Calc('add')" onClick="this.focus();this.select();" /> <input type="button" value=" + " onclick="addone(box3);"> <input type="button" value=" - " onclick="subtractone(box3);"> <br /> <br /> Total: <input readonly style="border:0px; font-size:14; color:red;" id="total" name="total"> <br /> Totaly Divided by 25: <input readonly style="border:0px; font-size:14; color:red;" id="divided" name="divided"> </form> </body></html> I have the right details but the formulas I am trying completely break other aspects of the code. I cant figure out how to make the auto adding and auto dividing work at the same time

    Read the article

  • Making CSS Render in a simialr way on FireFox 3.0.15/IE 6.0 & 7.0

    - by R.R
    Following css renders differently depends on the browser (mainly with Firefox) Firefox: the border-left-style:dashed does not seem to take effect as desired and black lines are shown instead. Also font seems to be another issue using em as they respond relatively better in cross browser. When i used pixel its a mess but not sure em is better or not. I am not a CSS expert and working with CSS makes me feel worse than dealing with a second hand car dealer. .Main { font-family: Arial, "Trebuchet MS", Sans-Serif; font-size: 0.8em; border:0px; } .Header { font-family: Arial, "Trebuchet MS", Sans-Serif; font-size: 1.2em; color:#666; background : url("../images/header.jpg") repeat-x top left; padding-left: 10px; padding:4px; text-transform:uppercase; border:1px; border-left-style:dashed; border-bottom-width:thin; border-collapse:collapse } .Footer { color:#666; font-family: Arial, "Trebuchet MS", Sans-Serif; font-size: 0.7em; } .Footer td { border-style:none; text-align:center; } .Footer span { color:#666; font-family: Arial, "Trebuchet MS", Sans-Serif; font-size: 0.7em; font-weight:bold; text-decoration:underline; border-style:none; } .Footer a { font-family: Arial, "Trebuchet MS", Sans-Serif; font-size: 0.7em; color:#666; } .Results-Item td { margin-left: 10px; vertical-align:middle; color:#666; background-color: white; font-size: 1.2em; padding:4px; font-family: Arial, "Trebuchet MS", Sans-Serif; padding-left: 10px; line-height: 20px; border:1px; border-left-style:dashed; border-bottom-width:thin; border-collapse:collapse; } .Results-AltItem td { margin-left: 10px; vertical-align:middle; color:#666; font-size: 1.2em; /* _font-size: 1.2em; /* IE6 hack */ padding:4px; font-family: Arial, "Trebuchet MS", Sans-Serif; background-color: #ccc; padding-left: 10px; line-height: 20px; border:1px; border:1px; border-left-style:dashed; border-bottom-width:thin; border-collapse:collapse; } Amount { text-align:right; }

    Read the article

  • Do I must expose the aggregate children as public properties to implement the Persistence ignorance?

    - by xuehua
    Hi all, I'm very glad that i found this website recently, I've learned a lot from here. I'm from China, and my English is not so good. But i will try to express myself what i want to say. Recently, I've started learning about Domain Driven Design, and I'm very interested about it. And I plan to develop a Forum website using DDD. After reading lots of threads from here, I understood that persistence ignorance is a good practice. Currently, I have two questions about what I'm thinking for a long time. Should the domain object interact with repository to get/save data? If the domain object doesn't use repository, then how does the Infrastructure layer (like unit of work) know which domain object is new/modified/removed? For the second question. There's an example code: Suppose i have a user class: public class User { public Guid Id { get; set; } public string UserName { get; set; } public string NickName { get; set; } /// <summary> /// A Roles collection which represents the current user's owned roles. /// But here i don't want to use the public property to expose it. /// Instead, i use the below methods to implement. /// </summary> //public IList<Role> Roles { get; set; } private List<Role> roles = new List<Role>(); public IList<Role> GetRoles() { return roles; } public void AddRole(Role role) { roles.Add(role); } public void RemoveRole(Role role) { roles.Remove(role); } } Based on the above User class, suppose i get an user from the IUserRepository, and add an Role for it. IUserRepository userRepository; User user = userRepository.Get(Guid.NewGuid()); user.AddRole(new Role() { Name = "Administrator" }); In this case, i don't know how does the repository or unit of work can know that user has a new role? I think, a real persistence ignorance ORM framework should support POCO, and any changes occurs on the POCO itself, the persistence framework should know automatically. Even if change the object status through the method(AddRole, RemoveRole) like the above example. I know a lot of ORM can automatically persistent the changes if i use the Roles property, but sometimes i don't like this way because of the performance reason. Could anyone give me some ideas for this? Thanks. This is my first question on this site. I hope my English can be understood. Any answers will be very appreciated.

    Read the article

  • Opening a file with a variable as name and checking for undefined values

    - by Harm De Weirdt
    I'm having some problems writing data into a file using Perl. sub startNewOrder{ my $name = makeUniqueFileName(); open (ORDER, ">$name.txt") or die "can't open file: $!\n"; format ORDER_TOP = PRODUCT<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<CODE<<<<<<<<AANTAL<<<<EENHEIDSPRIJS<<<<<<TOTAAL<<<<<<< . format ORDER = @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @<<<<<<<< @<<<< @<<<<<< @<<<<< $title, $code, $amount, $price, $total . close (ORDER); } This is the sub I use to make the file. (I translated most of it.) The makeUniqueFileName method makes a fileName based upon current time("minuteshoursdayOrder"). The problem now is that I have to write to this file in another sub. sub addToOrder{ print "give productcode:"; $code = <STDIN>; chop $code; print "Give amount:"; $amount = <STDIN>; chop $amount; if($inventory{$code} eq undef){ #Does the product exist? print "This product does not exist"; }elsif($inventory{$code}[2] < $amount && !defined($inventaris{$code}[2]) ){ #Is there enough in the inventory? print "There is not enough in stock" }else{ $inventory{$code}[2] -= $amount; #write in order file open (ORDER ">>$naam.txt") or die "can't open file: $!\n"; $title = $inventory{$code}[0]; $code = $code; $amount = $inventory{$code}[2]; $price = $inventory{$code}[1]; $total = $inventory{$code}[1]; write; close(ORDER); } %inventory is a hashtable that has the productcode as key and an array with the title, price and amount as value. There are two problems here: when I enter an invalid product number, I still have to enter an amount even while my code says it should print the error directly after checking if there is a product with the given code. The second problem is that the writing doesn't seem to work. It always give's a "No such file or directory" error. Is there a way to open the ORDER file I made in the first sub without having to make $name not local? Or just a way to write in this file? I really don't know how to start here. I can't really find much info on writing a file that has been closed before, and in a different sub. Any help is appreciated, Harm

    Read the article

  • jQuery autocomplete. Doesn't reveal existing matches.

    - by Alexander
    Hello fellow engineers. I have come across a problem I just can't solve. I am using autocomplete plugin for jQuery on an input. The HTML looks something like this: <tr id="row_house" class="no-display"> <td class="col_num">4</td> <td class="col_label">House Number</td> <td class="col_data"> <input type="text" title="House Number" name="house" id="house"/> <button class="pretty_button ui-state-default ui-corner-all button-finish">Get house info</button> </td> </tr> I am sure that this is the only id="house" field. Other fields that are before this one work fine with autocomplete, and it's basically the same algorithm (other variables, other data, other calls). So why doesn't it work like it should work with the following init. code: $("#house").autocomplete(["1/4","6","6/1","6/4","8","8/1","8/5","10","10/1","10/3","10/4","12","12/1","12/5","12/6","14","14/1","15","15/1","15/2","15/4","15/5","16","16/1","16/2","16/21","16/2B","16/3","16/4","17","17/1","17/2","17/4","17/5","17/6","17/7","17/8","18","18/1","18/2","18/3","18/5","18/95","19","19/1","19/2","19/3","19/4","19/5","19/6","19/7","19/8","20","20/1","20/2","20/3","20/4","21","21/1","21/2","21/3","21/4","22","22/9","23","23/2","23/4","24","24/1","24/2","24/3","24/A","25","25/1","25/10","25/2","25/4","25/5","25/6","25/7","25/8","25/9","26","26/1","26/6","27","27/2","28","28/1","29","29/2","29/3","29/4","30","30/1","30/2","30/3","31","31/1","31/3","32/A","33","34","34/1","34/11","34/2","34/3","35","35/1","35/2","35/4","36","36/1","36/A","37","37/1","37/2","38","38/1","38/2","39/1","39/2","39/3","39/4","40","40/1","41","41/2","42","43","44","45","45/1","45/10","45/11","45/12","45/13","45/14","45/15","45/16","45/17","45/2","45/3","45/6","45/7","45/8","45/9","46","47","47/2","49","49/1","50","51","51/1","51/2","52","53","54","55/7","66","109","122","190/8","412"], {minChars:1, mustMatch:true}).result(function(event, result, formatted) { var found=false; for(var index=0; index<HChouses.length; index++) //HChouses is the same array used for init, but each entry is paired with a database ID. if(HChouses[index][0]==result) { found=true; HChouseId=HChouses[index][1]; $("#row_house .button-finish").click(function() { QueryServer("HouseConnect","FillData",true,HChouseId); //this performs an AJAX request }); break; } if(!found) $("#row_house .button-finish").unbind("click"); }); Each time I start typing (say I press the "1" button), the text appears and gets deleted instantly. Rarely at all after repeated presses I get the list (although much shorter than it should be) But if after that I press the second digit, the whole thing disappears again. P.S. I use Firefox 3.6.3 for development.

    Read the article

  • Problem in arranging contents of Class in JAVA

    - by LuckySlevin
    Hi, I have some classes and I'm trying to fill the objects of this class. Here is what i've tried. (Question is at the below) public class Team { private String clubName; private String preName; private ArrayList<String> branches; public Team(String clubName, String preName) { this.clubName = clubName; this.preName = preName; branches = new ArrayList<String>(); } public Team() { // TODO Auto-generated constructor stub } public String getClubName() { return clubName; } public String getPreName() { return preName; } public ArrayList<String> getBranches() { return branches; } public void setClubName(String clubName) { this.clubName = clubName; } public void setPreName(String preName) { this.preName = preName; } public void setBranches(ArrayList<String> branches) { this.branches = branches; } } public class Branch { private ArrayList<Player> players = new ArrayList<Player>(); String brName; public Branch() {} public void setBr(String brName){this.brName = brName;} public String getBr(){return brName;} public ArrayList<Player> getPlayers() { return players; } public void setPlayers(ArrayList<Player> players) { this.players = players; } } //TEST CLASS public class test { /** * @param args * @throws IOException */ public static void main(String[] args) throws IOException { String a,b,c; String q = "q"; int brCount = 0, tCount = 0; BufferedReader input = new BufferedReader(new InputStreamReader(System.in)); Team[] teams = new Team[30]; Branch[] myBranch = new Branch[30]; for(int z = 0 ; z <30 ;z++) { teams[z] = new Team(); myBranch[z] = new Branch(); } ArrayList<String> tmp = new ArrayList<String>(); int k = 0; int secim = Integer.parseInt(input.readLine()); while(secim != 0) { if(k!=0) secim = Integer.parseInt(input.readLine()); k++; switch(secim) { case 1 : brCount = 0; a = input.readLine(); teams[tCount].setClubName(a); b= input.readLine(); teams[tCount].setPreName(b); c = input.readLine(); while(c.equals(q) == false) { if(brCount != 0) {c = input.readLine();} if(c.equals(q)== false){ myBranch[brCount].brName = c; tmp.add(myBranch[brCount].brName); brCount++; } System.out.println(brCount); } teams[tCount].setBranches(tmp); for(int i=0;i<=tCount;i++ ){ System.out.print("a :" + teams[i].getClubName()+ " " + teams[i].getPreName()+ " "); System.out.println(teams[i].getBranches());} tCount++; break; case 2: String src = input.readLine();//LATERRRRRRRr } } } } The problem is one of my class elements. I have an arraylist as an element of a class. When i enter: AAA as preName BBB as clubName c d e as Branches Then as a second element www as preName GGG as clubName a b as branches The result is coming like: AAA BBB c,d,e,a,b GGG www c,d,e,a,b Which means ArrayList part of the class is putting it on and on. I tried to use clear() method but caused problems. Any ideas.

    Read the article

  • Opening a file with a variable as name & checking for undefined values

    - by Harm De Weirdt
    Hello everyone. I'm having some problems writing data into a file using perl. sub startNewOrder{ my $name = makeUniqueFileName(); open (ORDER, ">$name.txt") or die "can't open file: $!\n"; format ORDER_TOP = PRODUCT<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<CODE<<<<<<<<AANTAL<<<<EENHEIDSPRIJS<<<<<<TOTAAL<<<<<<< . format ORDER = @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @<<<<<<<< @<<<< @<<<<<< @<<<<< $title, $code, $amount, $price, $total . close (ORDER); } This is the sub I use to make the file. (I translated most of it) The makeUniqueFileName method makes a fileName based upon current time("minuteshoursdayOrder"). The problem now is that I have to write in this file in another sub. sub addToOrder{ print "give productcode:"; $code = <STDIN>; chop $code; print "Give amount:"; $amount = <STDIN>; chop $amount; if($inventory{$code} eq undef){ #Does the product exist? print "This product does not exist"; }elsif($inventory{$code}[2] < $amount && !defined($inventaris{$code}[2]) ){ #Is there enough in the inventory? print "There is not enough in stock" }else{ $inventory{$code}[2] -= $amount; #write in order file open (ORDER ">>$naam.txt") or die "can't open file: $!\n"; $title = $inventory{$code}[0]; $code = $code; $amount = $inventory{$code}[2]; $price = $inventory{$code}[1]; $total = $inventory{$code}[1]; write; close(ORDER); } %inventory is a hashtable that has the productcode as key and an array with the title, price and amount as value. There are two problems here: when I enter an invalid product number, I still have to enter an amount even while my code says it should print the error directly after checking if there is a product with the given code. The second problem is that the writing doesn't seem to work. It always give's a "No such file or directory" error. Is there a way to open the ORDER file i made in the first sub without having to make $name not local? Or just a way to write in this file? I really don't know how to start here. I can't really find much info on writing a file that has been closed before, and in a different sub.. Any help is appreciated, Harm

    Read the article

  • A view interface for large object/array dumps

    - by user685107
    I want to embed in a page a detailed structure report of my model objects, like print_r() or var_export() produce (now I’m doing this with running var_export() on get_object_vars()). But what I actually want to see is only some properties (in most cases), but at this moment I have to use Ctrl+F and seek the variable I want, instead of just staring at it right after the page completes loading. So I’m embedding buttons to show/hide large arrays etc. but thought: ‘What if there already is the thing I do right now?’ So is there? Update: What would your ideal interface look like? First of all, dumped models fit in the first screen. All the properties can be seen at the first look at the screen (there are not many of them, around 10 per each, three models total, so it is possible). Small arrays can be shown unrolled too. Let the size of the array to count it as ‘small’ be definable. Ideally, the user can see values of the properties without doing any click, scrolling the screen or typing something. There must be some improvements to representing the values, say, if an array is empty, show array ‘My_big_array’ is empty and if a boolean variable starting with is_, has_, had_ has a false as the value, make the variable (let us take is_available for example) shown as is_NOT_available in red, and if it has true as the value, show is_available in green. Without any value shown. The same goes for defined constants. That would be ideal. I want to make focus on this kind of switches. Krumo seems useful, but since it always closes up the variable without making difference of how large it is, I cannot use it as is, but there might appear something similar on github soon :) Second update starts here: Any programmer who sees is_available = false will know what it means, no need to do more Bringing in color indication I forgot about one thing: the ‘switches’ let’s call them so, may me important or not. So I have right now some of them that will show in green or red, this is for something global, like caching, which is shown as Caching is… ON with ‘ON’ written in green, (and ‘OFF’ in red when disabled) while the words about what it is, i.e. ‘Caching is… ’ are written in black. And some which are not so important, for example I haven’t defined REVEAL_TIES is… not set with ‘not set’ written in gray, while the words describing what it is stay in black. And if it would be set the whole phrase would be in black since there is nothing important: if this small utility for showing some undercover things is working, I will see some messages after it, if it isn’t — site will be working independently of its state. Dividing switches into important ones and not with corresponding color match should improve readability, especially for those users who are not programmers and just enabled debug mode because some guy from bugzilla said do that — for them it would help to understand what is important and what is not.

    Read the article

  • Sending typedef struct containing void* by creating MPI drived datatype.

    - by hankol
    what I understand studying MPI specification is that an MPI send primitive refer to a memory location (or a send buffer) pointed by the data to be sent and take the data in that location which then passed as a message to the another Process. Though it is true that virtual address of a give process will be meaningless in another process memory address; It is ok to send data pointed by pointer such as void pointer as MPI will any way pass the data itself as a message For example the following works correctly: // Sender Side. int x = 100; void* snd; MPI_Send(snd,4,MPI_BYTE,1,0,MPI_COMM_WORLD); // Receiver Side. void* rcv; MPI_Recv(rcv, 4,MPI_BYTE,0,0,MPI_COMM_WORLD); but when I add void* snd in a struct and try to send the struct this will no succeed. I don't understand why the previous example work correctly but not the following. Here, I have defined a typedef struct and then create an MPI_DataType from it. With the same explanation of the above the following should also have succeed, unfortunately it is not working. here is the code: #include "mpi.h" #include<stdio.h> int main(int args, char *argv[]) { int rank, source =0, tag=1, dest=1; int bloackCount[2]; MPI_Init(&args, &argv); typedef struct { void* data; int tag; } data; data myData; MPI_Datatype structType, oldType[2]; MPI_Status stat; /* MPI_Aint type used to idetify byte displacement of each block (array)*/ MPI_Aint offsets[2], extent; MPI_Comm_rank(MPI_COMM_WORLD, &rank); offsets[0] = 0; oldType[0] = MPI_BYTE; bloackCount[0] = 1; MPI_Type_extent(MPI_INT, &extent); offsets[1] = 4 * extent; /*let say the MPI_BYTE will contain ineteger : size of int * extent */ oldType[1] = MPI_INT; bloackCount[1] = 1; MPI_Type_create_struct(2, bloackCount,offsets,oldType, &structType); MPI_Type_commit(&structType); if(rank == 0){ int x = 100; myData.data = &x; myData.tag = 99; MPI_Send(&myData,1,structType, dest, tag, MPI_COMM_WORLD); } if(rank == 1 ){ MPI_Recv(&myData, 1, structType, source, tag, MPI_COMM_WORLD, &stat); // with out this the following printf() will properly print the value 99 for // myData.tag int x = *(int *) myData.data; printf(" \n Process %d, Received : %d , %d \n\n", rank , myData.tag, x); } MPI_Type_free(&structType); MPI_Finalize(); } Error message running the code: [Looks like I am trying to access an invalid memory address space in the second process] [ubuntu:04123] *** Process received signal *** [ubuntu:04123] Signal: Segmentation fault (11) [ubuntu:04123] Signal code: Address not mapped (1) [ubuntu:04123] Failing at address: 0xbfe008bc [ubuntu:04123] [ 0] [0xb778240c] [ubuntu:04123] [ 1] GenericstructType(main+0x161) [0x8048935] [ubuntu:04123] [ 2] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0xb750f4d3] [ubuntu:04123] [ 3] GenericstructType() [0x8048741] [ubuntu:04123] *** End of error message *** Can some please explain to me why it is not working. any advice will also be appreciated thanks,

    Read the article

  • How does java.util.Collections.contains() perform faster than a linear search?

    - by The111
    I've been fooling around with a bunch of different ways of searching collections, collections of collections, etc. Doing lots of stupid little tests to verify my understanding. Here is one which boggles me (source code further below). In short, I am generating N random integers and adding them to a list. The list is NOT sorted. I then use Collections.contains() to look for a value in the list. I intentionally look for a value that I know won't be there, because I want to ensure that the entire list space is probed. I time this search. I then do another linear search manually, iterating through each element of the list and checking if it matches my target. I also time this search. On average, the second search takes 33% longer than the first one. By my logic, the first search must also be linear, because the list is unsorted. The only possibility I could think of (which I immediately discard) is that Java is making a sorted copy of my list just for the search, but (1) I did not authorize that usage of memory space and (2) I would think that would result in MUCH more significant time savings with such a large N. So if both searches are linear, they should both take the same amount of time. Somehow the Collections class has optimized this search, but I can't figure out how. So... what am I missing? import java.util.*; public class ListSearch { public static void main(String[] args) { int N = 10000000; // number of ints to add to the list int high = 100; // upper limit for random int generation List<Integer> ints; int target = -1; // target will not be found, forces search of entire list space long start; long end; ints = new ArrayList<Integer>(); start = System.currentTimeMillis(); System.out.print("Generating new list... "); for (int i = 0; i < N; i++) { ints.add(((int) (Math.random() * high)) + 1); } end = System.currentTimeMillis(); System.out.println("took " + (end-start) + "ms."); start = System.currentTimeMillis(); System.out.print("Searching list for target (method 1)... "); if (ints.contains(target)) { // nothing } end = System.currentTimeMillis(); System.out.println(" Took " + (end-start) + "ms."); System.out.println(); ints = new ArrayList<Integer>(); start = System.currentTimeMillis(); System.out.print("Generating new list... "); for (int i = 0; i < N; i++) { ints.add(((int) (Math.random() * high)) + 1); } end = System.currentTimeMillis(); System.out.println("took " + (end-start) + "ms."); start = System.currentTimeMillis(); System.out.print("Searching list for target (method 2)... "); for (Integer i : ints) { // nothing } end = System.currentTimeMillis(); System.out.println(" Took " + (end-start) + "ms."); } }

    Read the article

  • (This is for a project, so yes it is homework) How would I finish this java code?

    - by user2924318
    The task is to create arrays using user input (which I was able to do), then for the second part, use a separate method to sort the array in ascending order then output it. I have gotten it to do everything I need except I don't know how I would get it to sort. The directions say to use a while loop from 0 to the length to find the minimum value then swap that with the 1st, but I don't know how to do this. This is what I have so far: public static void main(String[] args) { Scanner in = new Scanner(System.in); int storage = getNumDigits(in); if(storage == 0){ System.out.print("No digits to store? OK, goodbye!"); System.exit(0); } int []a = new int [storage]; a = getDigits(a, in); displayDigits(a); selectionSort(a); } private static int getNumDigits(Scanner inScanner) { System.out.print("Please enter the number of digits to be stored: "); int stored = inScanner.nextInt(); while(stored < 0){ System.out.println("ERROR! You must enter a non-negative number of digits!"); System.out.println(); System.out.print("Please enter the number of digits to be stored: "); stored = inScanner.nextInt(); } return stored; } private static int[] getDigits(int[] digits, Scanner inScanner) { int length = digits.length; int count = 0; int toBeStored = 0; while(count < length){ System.out.print("Enter integer " +count +": "); toBeStored = inScanner.nextInt(); digits[count] = toBeStored; count++; } return digits; } private static void displayDigits(int[] digits) { int len = digits.length; System.out.println(); System.out.println("Array before sorting:"); System.out.println("Number of digits in array: " +len); System.out.print("Digits in array: "); for(int cnt = 0; cnt < len-1; cnt++){ System.out.print(digits[cnt] + ", "); } System.out.println(digits[len-1]); } private static void selectionSort(int[] digits) { int l = digits.length; System.out.println(); System.out.println("Array after sorting:"); System.out.println("Number of digits in array: " +l); System.out.print("Digits in array: "); int index = 0; int value = digits[0]; int indVal = digits[index]; while(index < l){ indVal = digits[index]; if(indVal <= value){ indVal = value; digits[index] = value; index++; } else if(value < indVal){ index++; } System.out.print(value); //This is where I don't know what to do. } }

    Read the article

  • .NET WebRequest.PreAuthenticate not quite what it sounds like

    - by Rick Strahl
    I’ve run into the  problem a few times now: How to pre-authenticate .NET WebRequest calls doing an HTTP call to the server – essentially send authentication credentials on the very first request instead of waiting for a server challenge first? At first glance this sound like it should be easy: The .NET WebRequest object has a PreAuthenticate property which sounds like it should force authentication credentials to be sent on the first request. Looking at the MSDN example certainly looks like it does: http://msdn.microsoft.com/en-us/library/system.net.webrequest.preauthenticate.aspx Unfortunately the MSDN sample is wrong. As is the text of the Help topic which incorrectly leads you to believe that PreAuthenticate… wait for it - pre-authenticates. But it doesn’t allow you to set credentials that are sent on the first request. What this property actually does is quite different. It doesn’t send credentials on the first request but rather caches the credentials ONCE you have already authenticated once. Http Authentication is based on a challenge response mechanism typically where the client sends a request and the server responds with a 401 header requesting authentication. So the client sends a request like this: GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive and the server responds with: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: basic realm=rasnote" X-AspNet-Version: 2.0.50727 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM WWW-Authenticate: Basic realm="rasnote" X-Powered-By: ASP.NET Date: Tue, 27 Oct 2009 00:58:20 GMT Content-Length: 5163 plus the actual error message body. The client then is responsible for re-sending the current request with the authentication token information provided (in this case Basic Auth): GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: TimeTrakker=2HJ1998WH06696; WebLogCommentUser=Rick Strahl|http://www.west-wind.com/|[email protected]; WebStoreUser=b8bd0ed9 Authorization: Basic cgsf12aDpkc2ZhZG1zMA== Once the authorization info is sent the server responds with the actual page result. Now if you use WebRequest (or WebClient) the default behavior is to re-authenticate on every request that requires authorization. This means if you look in  Fiddler or some other HTTP client Proxy that captures requests you’ll see that each request re-authenticates: Here are two requests fired back to back: and you can see the 401 challenge, the 200 response for both requests. If you watch this same conversation between a browser and a server you’ll notice that the first 401 is also there but the subsequent 401 requests are not present. WebRequest.PreAuthenticate And this is precisely what the WebRequest.PreAuthenticate property does: It’s a caching mechanism that caches the connection credentials for a given domain in the active process and resends it on subsequent requests. It does not send credentials on the first request but it will cache credentials on subsequent requests after authentication has succeeded: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rick", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rstrahl", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); which results in the desired sequence: where only the first request doesn’t send credentials. This is quite useful as it saves quite a few round trips to the server – bascially it saves one auth request request for every authenticated request you make. In most scenarios I think you’d want to send these credentials this way but one downside to this is that there’s no way to log out the client. Since the client always sends the credentials once authenticated only an explicit operation ON THE SERVER can undo the credentials by forcing another login explicitly (ie. re-challenging with a forced 401 request). Forcing Basic Authentication Credentials on the first Request On a few occasions I’ve needed to send credentials on a first request – mainly to some oddball third party Web Services (why you’d want to use Basic Auth on a Web Service is beyond me – don’t ask but it’s not uncommon in my experience). This is true of certain services that are using Basic Authentication (especially some Apache based Web Services) and REQUIRE that the authentication is sent right from the first request. No challenge first. Ugly but there it is. Now the following works only with Basic Authentication because it’s pretty straight forward to create the Basic Authorization ‘token’ in code since it’s just an unencrypted encoding of the user name and password into base64. As you might guess this is totally unsecure and should only be used when using HTTPS/SSL connections (i’m not in this example so I can capture the Fiddler trace and my local machine doesn’t have a cert installed, but for production apps ALWAYS use SSL with basic auth). The idea is that you simply add the required Authorization header to the request on your own along with the authorization string that encodes the username and password: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "rick"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested;req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); This works and causes the request to immediately send auth information to the server. However, this only works with Basic Auth because you can actually create the authentication credentials easily on the client because it’s essentially clear text. The same doesn’t work for Windows or Digest authentication since you can’t easily create the authentication token on the client and send it to the server. Another issue with this approach is that PreAuthenticate has no effect when you manually force the authentication. As far as Web Request is concerned it never sent the authentication information so it’s not actually caching the value any longer. If you run 3 requests in a row like this: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "ricks"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); you’ll find the trace looking like this: where the first request (the one we explicitly add the header to) authenticates, the second challenges, and any subsequent ones then use the PreAuthenticate credential caching. In effect you’ll end up with one extra 401 request in this scenario, which is still better than 401 challenges on each request. Getting Access to WebRequest in Classic .NET Web Service Clients If you’re running a classic .NET Web Service client (non-WCF) one issue with the above is how do you get access to the WebRequest to actually add the custom headers to do the custom Authentication described above? One easy way is to implement a partial class that allows you add headers with something like this: public partial class TaxService { protected NameValueCollection Headers = new NameValueCollection(); public void AddHttpHeader(string key, string value) { this.Headers.Add(key,value); } public void ClearHttpHeaders() { this.Headers.Clear(); } protected override WebRequest GetWebRequest(Uri uri) { HttpWebRequest request = (HttpWebRequest) base.GetWebRequest(uri); request.Headers.Add(this.Headers); return request; } } where TaxService is the name of the .NET generated proxy class. In code you can then call AddHttpHeader() anywhere to add additional headers which are sent as part of the GetWebRequest override. Nice and simple once you know where to hook it. For WCF there’s a bit more work involved by creating a message extension as described here: http://weblogs.asp.net/avnerk/archive/2006/04/26/Adding-custom-headers-to-every-WCF-call-_2D00_-a-solution.aspx. FWIW, I think that HTTP header manipulation should be readily available on any HTTP based Web Service client DIRECTLY without having to subclass or implement a special interface hook. But alas a little extra work is required in .NET to make this happen Not a Common Problem, but when it happens… This has been one of those issues that is really rare, but it’s bitten me on several occasions when dealing with oddball Web services – a couple of times in my own work interacting with various Web Services and a few times on customer projects that required interaction with credentials-first services. Since the servers determine the protocol, we don’t have a choice but to follow the protocol. Lovely following standards that implementers decide to ignore, isn’t it? :-}© Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  CSharp  Web Services  

    Read the article

  • jqgrid with asp.net webmethod and json working with sorting, paging, searching and LINQ

    - by aimlessWonderer
    THIS WORKS! Most topics covering jqgrid and asp.net seem to relate to just receiving JSON, or working in the MVC framework, or utilizing other handlers or web services... but not many dealt with actually passing parameters back to an actual webmethod in the codebehind. Furthermore, scarce are the examples that contain successful implementation the AJAX paging, sorting, or searching along with LINQ to SQL for asp.net jqGrid. Below is a working example that may help others who need help to pass parameters to jqGrid in order to have correct paging, sorting, filtering.. it uses pieces from here and there... ================================================== First, THE JAVASCRIPT <script type="text/javascript"> $(document).ready(function() { var grid = $("#list"); $("#list").jqGrid({ // setup custom parameter names to pass to server prmNames: { search: "isSearch", nd: null, rows: "numRows", page: "page", sort: "sortField", order: "sortOrder" }, // add by default to avoid webmethod parameter conflicts postData: { searchString: '', searchField: '', searchOper: '' }, // setup ajax call to webmethod datatype: function(postdata) { mtype: "GET", $.ajax({ url: 'PageName.aspx/getGridData', type: "POST", contentType: "application/json; charset=utf-8", data: JSON.stringify(postdata), dataType: "json", success: function(data, st) { if (st == "success") { var grid = jQuery("#list")[0]; grid.addJSONData(JSON.parse(data.d)); } }, error: function() { alert("Error with AJAX callback"); } }); }, // this is what jqGrid is looking for in json callback jsonReader: { root: "rows", page: "page", total: "totalpages", records: "totalrecords", cell: "cell", id: "id", //index of the column with the PK in it userdata: "userdata", repeatitems: true }, colNames: ['Id', 'First Name', 'Last Name'], colModel: [ { name: 'id', index: 'id', width: 55, search: false }, { name: 'fname', index: 'fname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} }, { name: 'lname', index: 'lname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} } ], rowNum: 10, rowList: [10, 20, 30], pager: jQuery("#pager"), sortname: "fname", sortorder: "asc", viewrecords: true, caption: "Grid Title Here" }).jqGrid('navGrid', '#pager', { edit: false, add: false, del: false }, {}, // default settings for edit {}, // add {}, // delete { closeOnEscape: true, closeAfterSearch: true}, //search {} ) }); </script> ================================================== Second, THE C# WEBMETHOD [WebMethod] public static string getGridData(int? numRows, int? page, string sortField, string sortOrder, bool isSearch, string searchField, string searchString, string searchOper) { string result = null; MyDataContext db = null; try { //--- retrieve the data db = new MyDataContext("my connection string path"); var query = from u in db.TBL_USERs select u; //--- determine if this is a search filter if (isSearch) { searchOper = getOperator(searchOper); // need to associate correct operator to value sent from jqGrid string whereClause = String.Format("{0} {1} {2}", searchField, searchOper, "@" + searchField); //--- associate value to field parameter Dictionary<string, object> param = new Dictionary<string, object>(); param.Add("@" + searchField, searchString); query = query.Where(whereClause, new object[1] { param }); } //--- setup calculations int pageIndex = page ?? 1; //--- current page int pageSize = numRows ?? 10; //--- number of rows to show per page int totalRecords = query.Count(); //--- number of total items from query int totalPages = (int)Math.Ceiling((decimal)totalRecords / (decimal)pageSize); //--- number of pages //--- filter dataset for paging and sorting IQueryable<TBL_USER> orderedRecords = query.OrderBy(sortfield); IEnumerable<TBL_USER> sortedRecords = orderedRecords.ToList(); if (sortorder == "desc") sortedRecords= sortedRecords.Reverse(); sortedRecords= sortedRecords .Skip((pageIndex - 1) * pageSize) //--- page the data .Take(pageSize); //--- format json var jsonData = new { totalpages = totalPages, //--- number of pages page = pageIndex, //--- current page totalrecords = totalRecords, //--- total items rows = ( from row in sortedRecords select new { i = row.USER_ID, cell = new string[] { row.USER_ID.ToString(), row.FNAME.ToString(), row.LNAME } } ).ToArray() }; result = Newtonsoft.Json.JsonConvert.SerializeObject(jsonData); } catch (Exception ex) { Debug.WriteLine(ex); } finally { if (db != null) db.Dispose(); } return result; } ================================================== Third, NECESSITIES In order to have dynamic OrderBy clauses in the LINQ, I had to pull in a class to my AppCode folder called 'Dynamic.cs'. You can retrieve the file from downloading here. You will find the file in the "DynamicQuery" folder. That file will give you the ability to utilized dynamic ORDERBY clause since we don't know what column we're filtering by except on the initial load. To serialize the JSON back from the C-sharp to the JS, I incorporated the James Newton-King JSON.net DLL found here : http://json.codeplex.com/releases/view/37810. After downloading, there is a "Newtonsoft.Json.Compact.dll" which you can add in your Bin folder as a reference Here's my USING's block using System; using System.Collections; using System.Collections.Generic; using System.Linq; using System.Web.UI.WebControls; using System.Web.Services; using System.Linq.Dynamic; For the Javascript references, I'm using the following scripts in respective order in case that helps some folks: 1) jquery-1.3.2.min.js ... 2) jquery-ui-1.7.2.custom.min.js ... 3) json.min.js ... 4) i18n/grid.locale-en.js ... 5) jquery.jqGrid.min.js For the CSS, I'm using jqGrid's necessities as well as the jQuery UI Theme: 1) jquery_theme/jquery-ui-1.7.2.custom.css ... 2) ui.jqgrid.css The key to getting the parameters from the JS to the WebMethod without having to parse an unserialized string on the backend or having to setup some JS logic to switch methods for different numbers of parameters was this block postData: { searchString: '', searchField: '', searchOper: '' }, Those parameters will still be set correctly when you actually do a search and then reset to empty when you "reset" or want the grid to not do any filtering Hope this helps some others!!!! Please reply if you find major issues or ways of refactoring or doing better that I haven't considered.

    Read the article

  • jQuery Globalization Plugin from Microsoft

    - by ScottGu
    Last month I blogged about how Microsoft is starting to make code contributions to jQuery, and about some of the first code contributions we were working on: jQuery Templates and Data Linking support. Today, we released a prototype of a new jQuery Globalization Plugin that enables you to add globalization support to your JavaScript applications. This plugin includes globalization information for over 350 cultures ranging from Scottish Gaelic, Frisian, Hungarian, Japanese, to Canadian English.  We will be releasing this plugin to the community as open-source. You can download our prototype for the jQuery Globalization plugin from our Github repository: http://github.com/nje/jquery-glob You can also download a set of samples that demonstrate some simple use-cases with it here. Understanding Globalization The jQuery Globalization plugin enables you to easily parse and format numbers, currencies, and dates for different cultures in JavaScript. For example, you can use the Globalization plugin to display the proper currency symbol for a culture: You also can use the Globalization plugin to format dates so that the day and month appear in the right order and the day and month names are correctly translated: Notice above how the Arabic year is displayed as 1431. This is because the year has been converted to use the Arabic calendar. Some cultural differences, such as different currency or different month names, are obvious. Other cultural differences are surprising and subtle. For example, in some cultures, the grouping of numbers is done unevenly. In the "te-IN" culture (Telugu in India), groups have 3 digits and then 2 digits. The number 1000000 (one million) is written as "10,00,000". Some cultures do not group numbers at all. All of these subtle cultural differences are handled by the jQuery Globalization plugin automatically. Getting dates right can be especially tricky. Different cultures have different calendars such as the Gregorian and UmAlQura calendars. A single culture can even have multiple calendars. For example, the Japanese culture uses both the Gregorian calendar and a Japanese calendar that has eras named after Japanese emperors. The Globalization Plugin includes methods for converting dates between all of these different calendars. Using Language Tags The jQuery Globalization plugin uses the language tags defined in the RFC 4646 and RFC 5646 standards to identity cultures (see http://tools.ietf.org/html/rfc5646). A language tag is composed out of one or more subtags separated by hyphens. For example: Language Tag Language Name (in English) en-AU English (Australia) en-BZ English (Belize) en-CA English (Canada) Id Indonesian zh-CHS Chinese (Simplified) Legacy Zu isiZulu Notice that a single language, such as English, can have several language tags. Speakers of English in Canada format numbers, currencies, and dates using different conventions than speakers of English in Australia or the United States. You can find the language tag for a particular culture by using the Language Subtag Lookup tool located here:  http://rishida.net/utils/subtags/ The jQuery Globalization plugin download includes a folder named globinfo that contains the information for each of the 350 cultures. Actually, this folder contains more than 700 files because the folder includes both minified and un-minified versions of each file. For example, the globinfo folder includes JavaScript files named jQuery.glob.en-AU.js for English Australia, jQuery.glob.id.js for Indonesia, and jQuery.glob.zh-CHS for Chinese (Simplified) Legacy. Example: Setting a Particular Culture Imagine that you have been asked to create a German website and want to format all of the dates, currencies, and numbers using German formatting conventions correctly in JavaScript on the client. The HTML for the page might look like this: Notice the span tags above. They mark the areas of the page that we want to format with the Globalization plugin. We want to format the product price, the date the product is available, and the units of the product in stock. To use the jQuery Globalization plugin, we’ll add three JavaScript files to the page: the jQuery library, the jQuery Globalization plugin, and the culture information for a particular language: In this case, I’ve statically added the jQuery.glob.de-DE.js JavaScript file that contains the culture information for German. The language tag “de-DE” is used for German as spoken in Germany. Now that I have all of the necessary scripts, I can use the Globalization plugin to format the product price, date available, and units in stock values using the following client-side JavaScript: The jQuery Globalization plugin extends the jQuery library with new methods - including new methods named preferCulture() and format(). The preferCulture() method enables you to set the default culture used by the jQuery Globalization plugin methods. Notice that the preferCulture() method accepts a language tag. The method will find the closest culture that matches the language tag. The $.format() method is used to actually format the currencies, dates, and numbers. The second parameter passed to the $.format() method is a format specifier. For example, passing “c” causes the value to be formatted as a currency. The ReadMe file at github details the meaning of all of the various format specifiers: http://github.com/nje/jquery-glob When we open the page in a browser, everything is formatted correctly according to German language conventions. A euro symbol is used for the currency symbol. The date is formatted using German day and month names. Finally, a period instead of a comma is used a number separator: You can see a running example of the above approach with the 3_GermanSite.htm file in this samples download. Example: Enabling a User to Dynamically Select a Culture In the previous example we explicitly said that we wanted to globalize in German (by referencing the jQuery.glob.de-DE.js file). Let’s now look at the first of a few examples that demonstrate how to dynamically set the globalization culture to use. Imagine that you want to display a dropdown list of all of the 350 cultures in a page. When someone selects a culture from the dropdown list, you want all of the dates in the page to be formatted using the selected culture. Here’s the HTML for the page: Notice that all of the dates are contained in a <span> tag with a data-date attribute (data-* attributes are a new feature of HTML 5 that conveniently also still work with older browsers). We’ll format the date represented by the data-date attribute when a user selects a culture from the dropdown list. In order to display dates for any possible culture, we’ll include the jQuery.glob.all.js file like this: The jQuery Globalization plugin includes a JavaScript file named jQuery.glob.all.js. This file contains globalization information for all of the more than 350 cultures supported by the Globalization plugin.  At 367KB minified, this file is not small. Because of the size of this file, unless you really need to use all of these cultures at the same time, we recommend that you add the individual JavaScript files for particular cultures that you intend to support instead of the combined jQuery.glob.all.js to a page. In the next sample I’ll show how to dynamically load just the language files you need. Next, we’ll populate the dropdown list with all of the available cultures. We can use the $.cultures property to get all of the loaded cultures: Finally, we’ll write jQuery code that grabs every span element with a data-date attribute and format the date: The jQuery Globalization plugin’s parseDate() method is used to convert a string representation of a date into a JavaScript date. The plugin’s format() method is used to format the date. The “D” format specifier causes the date to be formatted using the long date format. And now the content will be globalized correctly regardless of which of the 350 languages a user visiting the page selects.  You can see a running example of the above approach with the 4_SelectCulture.htm file in this samples download. Example: Loading Globalization Files Dynamically As mentioned in the previous section, you should avoid adding the jQuery.glob.all.js file to a page whenever possible because the file is so large. A better alternative is to load the globalization information that you need dynamically. For example, imagine that you have created a dropdown list that displays a list of languages: The following jQuery code executes whenever a user selects a new language from the dropdown list. The code checks whether the globalization file associated with the selected language has already been loaded. If the globalization file has not been loaded then the globalization file is loaded dynamically by taking advantage of the jQuery $.getScript() method. The globalizePage() method is called after the requested globalization file has been loaded, and contains the client-side code to perform the globalization. The advantage of this approach is that it enables you to avoid loading the entire jQuery.glob.all.js file. Instead you only need to load the files that you need and you don’t need to load the files more than once. The 5_Dynamic.htm file in this samples download demonstrates how to implement this approach. Example: Setting the User Preferred Language Automatically Many websites detect a user’s preferred language from their browser settings and automatically use it when globalizing content. A user can set a preferred language for their browser. Then, whenever the user requests a page, this language preference is included in the request in the Accept-Language header. When using Microsoft Internet Explorer, you can set your preferred language by following these steps: Select the menu option Tools, Internet Options. Select the General tab. Click the Languages button in the Appearance section. Click the Add button to add a new language to the list of languages. Move your preferred language to the top of the list. Notice that you can list multiple languages in the Language Preference dialog. All of these languages are sent in the order that you listed them in the Accept-Language header: Accept-Language: fr-FR,id-ID;q=0.7,en-US;q=0.3 Strangely, you cannot retrieve the value of the Accept-Language header from client JavaScript. Microsoft Internet Explorer and Mozilla Firefox support a bevy of language related properties exposed by the window.navigator object, such as windows.navigator.browserLanguage and window.navigator.language, but these properties represent either the language set for the operating system or the language edition of the browser. These properties don’t enable you to retrieve the language that the user set as his or her preferred language. The only reliable way to get a user’s preferred language (the value of the Accept-Language header) is to write server code. For example, the following ASP.NET page takes advantage of the server Request.UserLanguages property to assign the user’s preferred language to a client JavaScript variable named acceptLanguage (which then allows you to access the value using client-side JavaScript): In order for this code to work, the culture information associated with the value of acceptLanguage must be included in the page. For example, if someone’s preferred culture is fr-FR (French in France) then you need to include either the jQuery.glob.fr-FR.js or the jQuery.glob.all.js JavaScript file in the page or the culture information won’t be available.  The “6_AcceptLanguages.aspx” sample in this samples download demonstrates how to implement this approach. If the culture information for the user’s preferred language is not included in the page then the $.preferCulture() method will fall back to using the neutral culture (for example, using jQuery.glob.fr.js instead of jQuery.glob.fr-FR.js). If the neutral culture information is not available then the $.preferCulture() method falls back to the default culture (English). Example: Using the Globalization Plugin with the jQuery UI DatePicker One of the goals of the Globalization plugin is to make it easier to build jQuery widgets that can be used with different cultures. We wanted to make sure that the jQuery Globalization plugin could work with existing jQuery UI plugins such as the DatePicker plugin. To that end, we created a patched version of the DatePicker plugin that can take advantage of the Globalization plugin when rendering a calendar. For example, the following figure illustrates what happens when you add the jQuery Globalization and the patched jQuery UI DatePicker plugin to a page and select Indonesian as the preferred culture: Notice that the headers for the days of the week are displayed using Indonesian day name abbreviations. Furthermore, the month names are displayed in Indonesian. You can download the patched version of the jQuery UI DatePicker from our github website. Or you can use the version included in this samples download and used by the 7_DatePicker.htm sample file. Summary I’m excited about our continuing participation in the jQuery community. This Globalization plugin is the third jQuery plugin that we’ve released. We’ve really appreciated all of the great feedback and design suggestions on the jQuery templating and data-linking prototypes that we released earlier this year.  We also want to thank the jQuery and jQuery UI teams for working with us to create these plugins. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. You can follow me at: twitter.com/scottgu

    Read the article

  • Configuring UCM cache to check for external Content Server changes

    - by Martin Deh
    Recently, I was involved in a customer scenario where they were modifying the Content Server's contributor data files directly through Content Server.  This operation of course is completely supported.  However, since the contributor data file was modified through the "backdoor", a running WebCenter Spaces page, which also used the same data file, would not get the updates immediately.  This was due to two reasons.  The first reason is that the Spaces page was using Content Presenter to display the contents of the data file. The second reason is that the Spaces application was using the "cached" version of the data file.  Fortunately, there is a way to configure cache so backdoor changes can be picked up more quickly and automatically. First a brief overview of Content Presenter.  The Content Presenter task flow enables WebCenter Spaces users with Page-Edit permissions to precisely customize the selection and presentation of content in a WebCenter Spaces application.  With Content Presenter, you can select a single item of content, contents under a folder, a list of items, or query for content, and then select a Content Presenter based template to render the content on a page in a Spaces application.  In addition to displaying the folders and the files in a Content Server, Content Presenter integrates with Oracle Site Studio to allow you to create, access, edit, and display Site Studio contributor data files (Content Server Document) in either a Site Studio region template or in a custom Content Presenter display template.  More information about creating Content Presenter Display Template can be found in the OFM Developers Guide for WebCenter Portal. The easiest way to configure the cache is to modify the WebCenter Spaces Content Server service connection setting through Enterprise Manager.  From here, under the Cache Details, there is a section to set the Cache Invalidation Interval.  Basically, this enables the cache to be monitored by the cache "sweeper" utility.  The cache sweeper queries for changes in the Content Server, and then "marks" the object in cache as "dirty".  This causes the application in turn to get a new copy of the document from the Content Server that replaces the cached version.  By default the initial value for the Cache Invalidation Interval is set to 0 (minutes).  This basically means that the sweeper is OFF.  To turn the sweeper ON, just set a value (in minutes).  The mininal value that can be set is 2 (minutes): Just a note.  In some instances, once the value of the Cache Invalidation Interval has been set (and saved) in the Enterprise Manager UI, it becomes "sticky" and the interval value cannot be set back to 0.  The good news is that this value can also be updated throught a WLST command.   The WLST command to run is as follows: setJCRContentServerConnection(appName, name, [socketType, url, serverHost, serverPort, keystoreLocation, keystorePassword, privateKeyAlias, privateKeyPassword, webContextRoot, clientSecurityPolicy, cacheInvalidationInterval, binaryCacheMaxEntrySize, adminUsername, adminPassword, extAppId, timeout, isPrimary, server, applicationVersion]) One way to get the required information for executing the command is to use the listJCRContentServerConnections('webcenter',verbose=true) command.  For example, this is the sample output from the execution: ------------------ UCM ------------------ Connection Name: UCM Connection Type: JCR External Appliction ID: Timeout: (not set) CIS Socket Type: socket CIS Server Hostname: webcenter.oracle.local CIS Server Port: 4444 CIS Keystore Location: CIS Private Key Alias: CIS Web URL: Web Server Context Root: /cs Client Security Policy: Admin User Name: sysadmin Cache Invalidation Interval: 2 Binary Cache Maximum Entry Size: 1024 The Documents primary connection is "UCM" From this information, the completed  setJCRContentServerConnection would be: setJCRContentServerConnection(appName='webcenter',name='UCM', socketType='socket', serverHost='webcenter.oracle.local', serverPort='4444', webContextRoot='/cs', cacheInvalidationInterval='0', binaryCacheMaxEntrySize='1024',adminUsername='sysadmin',isPrimary=1) Note: The Spaces managed server must be restarted for the change to take effect. More information about using WLST for WebCenter can be found here. Once the sweeper is turned ON, only cache objects that have been changed will be invalidated.  To test this out, I will go through a simple scenario.  The first thing to do is configure the Content Server so it can monitor and report on events.  Log into the Content Server console application, and under the Administration menu item, select System Audit Information.  Note: If your console is using the left menu display option, the Administration link will be located there. Under the Tracing Sections Information, add in only "system" and "requestaudit" in the Active Sections.  Check Full Verbose Tracing, check Save, then click the Update button.  Once this is done, select the View Server Output menu option.  This will change the browser view to display the log.  This is all that is needed to configure the Content Server. For example, the following is the View Server Output with the cache invalidation interval set to 2(minutes) Note the time stamp: requestaudit/6 08.30 09:52:26.001  IdcServer-68    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.016933999955654144(secs) requestaudit/6 08.30 09:52:26.010  IdcServer-69    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.006134999915957451(secs) requestaudit/6 08.30 09:52:26.014  IdcServer-70    GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.004271999932825565(secs) ... other trace info ... requestaudit/6 08.30 09:54:26.002  IdcServer-71    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.020323999226093292(secs) requestaudit/6 08.30 09:54:26.011  IdcServer-72    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.017928000539541245(secs) requestaudit/6 08.30 09:54:26.017  IdcServer-73    GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.010185999795794487(secs) Now that the tracing logs are reporting correctly, the next step is set up the Spaces app to test the sweeper. I will use 2 different pages that will use Content Presenter task flows.  Each task flow will use a different custom Content Presenter display template, and will be assign 2 different contributor data files (document that will be in the cache).  The pages at run time appear as follows: Initially, when the Space pages containing the content is loaded in the browser for the first time, you can see the tracing information in the Content Server output viewer. requestaudit/6 08.30 11:51:12.030 IdcServer-129 CLEAR_SERVER_OUTPUT [dUser=weblogic] 0.029171999543905258(secs) requestaudit/6 08.30 11:51:12.101 IdcServer-130 GET_SERVER_OUTPUT [dUser=weblogic] 0.025721000507473946(secs) requestaudit/6 08.30 11:51:26.592 IdcServer-131 VCR_GET_DOCUMENT_BY_NAME [dID=919][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][RevisionSelectionMethod=LatestReleased][IsJava=1] 0.21525299549102783(secs) requestaudit/6 08.30 11:51:27.117 IdcServer-132 VCR_GET_CONTENT_TYPES [dUser=sysadmin][IsJava=1] 0.5059549808502197(secs) requestaudit/6 08.30 11:51:27.146 IdcServer-133 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.03360399976372719(secs) requestaudit/6 08.30 11:51:27.169 IdcServer-134 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.008806000463664532(secs) requestaudit/6 08.30 11:51:27.204 IdcServer-135 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.013265999965369701(secs) requestaudit/6 08.30 11:51:27.384 IdcServer-136 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.18119299411773682(secs) requestaudit/6 08.30 11:51:27.533 IdcServer-137 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.1519480049610138(secs) requestaudit/6 08.30 11:51:27.634 IdcServer-138 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.10827399790287018(secs) requestaudit/6 08.30 11:51:27.687 IdcServer-139 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.059702999889850616(secs) requestaudit/6 08.30 11:51:28.271 IdcServer-140 GET_USER_PERMISSIONS [dUser=weblogic][IsJava=1] 0.006703000050038099(secs) requestaudit/6 08.30 11:51:28.285 IdcServer-141 GET_ENVIRONMENT [dUser=sysadmin][IsJava=1] 0.010893999598920345(secs) requestaudit/6 08.30 11:51:30.433 IdcServer-142 GET_SERVER_OUTPUT [dUser=weblogic] 0.017318999394774437(secs) requestaudit/6 08.30 11:51:41.837 IdcServer-143 VCR_GET_DOCUMENT_BY_NAME [dID=508][dDocName=113_ES][dDocTitle=Landing Home][dUser=weblogic][RevisionSelectionMethod=LatestReleased][IsJava=1] 0.15937699377536774(secs) requestaudit/6 08.30 11:51:42.781 IdcServer-144 GET_FILE [dID=326][dDocName=WEBCENTERORACL000315][dDocTitle=Duke][dUser=anonymous][RevisionSelectionMethod=LatestReleased][dSecurityGroup=Public][xCollectionID=0] 0.16288499534130096(secs) The highlighted sections show where the 2 data files DF_UCMCACHETESTER (P1 page) and 113_ES (P2 page) were called by the (Spaces) VCR connection to the Content Server. The most important line to notice is the VCR_GET_DOCUMENT_BY_NAME invocation.  On subsequent refreshes of these 2 pages, you will notice (after you refresh the Content Server's View Server Output) that there are no further traces of the same VCR_GET_DOCUMENT_BY_NAME invocations.  This is because the pages are getting the documents from the cache. The next step is to go through the "backdoor" and change one of the documents through the Content Server console.  This operation can be done by first locating the data file document, and from the Content Information page, select Edit Data File menu option.   This invokes the Site Studio Contributor, where the modifications can be made. Refreshing the Content Server View Server Output, the tracing displays the operations perform on the document.  requestaudit/6 08.30 11:56:59.972 IdcServer-255 SS_CHECKOUT_BY_NAME [dID=922][dDocName=DF_UCMCACHETESTER][dUser=weblogic][dSecurityGroup=Public] 0.05558200180530548(secs) requestaudit/6 08.30 11:57:00.065 IdcServer-256 SS_GET_CONTRIBUTOR_CONFIG [dID=922][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0] 0.08632399886846542(secs) requestaudit/6 08.30 11:57:00.470 IdcServer-259 DOC_INFO_BY_NAME [dID=922][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0] 0.02268899977207184(secs) requestaudit/6 08.30 11:57:10.177 IdcServer-264 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.007652000058442354(secs) requestaudit/6 08.30 11:57:10.181 IdcServer-263 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.01868399977684021(secs) requestaudit/6 08.30 11:57:10.187 IdcServer-265 GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.009367000311613083(secs) (internal)/6 08.30 11:57:26.118 IdcServer-266 File to be removed: /oracle/app/admin/domains/webcenter/ucm/cs/vault/~temp/703253295.xml (internal)/6 08.30 11:57:26.121 IdcServer-266 File to be removed: /oracle/app/admin/domains/webcenter/ucm/cs/vault/~temp/703253295.xml requestaudit/6 08.30 11:57:26.122 IdcServer-266 SS_SET_ELEMENT_DATA [dID=923][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0][StatusCode=0][StatusMessage=Successfully checked in content item 'DF_UCMCACHETESTER'.] 0.3765290081501007(secs) requestaudit/6 08.30 11:57:30.710 IdcServer-267 DOC_INFO_BY_NAME [dID=923][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0] 0.07942699640989304(secs) requestaudit/6 08.30 11:57:30.733 IdcServer-268 SS_GET_CONTRIBUTOR_STRINGS [dUser=weblogic] 0.0044570001773536205(secs) After a few moments and refreshing the P1 page, the updates has been applied. Note: The refresh time may very, since the Cache Invalidation Interval (set to 2 minutes) is not determined by when changes happened.  The sweeper just runs every 2 minutes. Refreshing the Content Server View Server Output, the tracing displays the important information. requestaudit/6 08.30 11:59:10.171 IdcServer-270 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.00952600035816431(secs) requestaudit/6 08.30 11:59:10.179 IdcServer-271 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.011118999682366848(secs) requestaudit/6 08.30 11:59:10.182 IdcServer-272 GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.007447000127285719(secs) requestaudit/6 08.30 11:59:16.885 IdcServer-273 VCR_GET_DOCUMENT_BY_NAME [dID=923][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][RevisionSelectionMethod=LatestReleased][IsJava=1] 0.0786449983716011(secs) After the specifed interval time the sweeper is invoked, which is noted by the GET_ ... calls.  Since the history has noted the change, the next call is to the VCR_GET_DOCUMENT_BY_NAME to retrieve the new version of the (modifed) data file.  Navigating back to the P2 page, and viewing the server output, there are no further VCR_GET_DOCUMENT_BY_NAME to retrieve the data file.  This simply means that this data file was just retrieved from the cache.   Upon further review of the server output, we can see that there was only 1 request for the VCR_GET_DOCUMENT_BY_NAME: requestaudit/6 08.30 12:08:00.021 Audit Request Monitor Request Audit Report over the last 120 Seconds for server webcenteroraclelocal16200****  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor -Num Requests 8 Errors 0 Reqs/sec. 0.06666944175958633 Avg. Latency (secs) 0.02762500010430813 Max Thread Count 2  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 1 Service VCR_GET_DOCUMENT_BY_NAME Total Elapsed Time (secs) 0.09200000017881393 Num requests 1 Num errors 0 Avg. Latency (secs) 0.09200000017881393  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 2 Service GET_PERSONALIZED_JAVASCRIPT Total Elapsed Time (secs) 0.054999999701976776 Num requests 1 Num errors 0 Avg. Latency (secs) 0.054999999701976776  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 3 Service GET_FOLDER_HISTORY_REPORT Total Elapsed Time (secs) 0.028999999165534973 Num requests 2 Num errors 0 Avg. Latency (secs) 0.014499999582767487  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 4 Service GET_SERVER_OUTPUT Total Elapsed Time (secs) 0.017999999225139618 Num requests 1 Num errors 0 Avg. Latency (secs) 0.017999999225139618  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 5 Service GET_FILE Total Elapsed Time (secs) 0.013000000268220901 Num requests 1 Num errors 0 Avg. Latency (secs) 0.013000000268220901  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor ****End Audit Report*****  

    Read the article

  • How to reduce iOS AVPlayer start delay

    - by Bernt Habermeier
    Note, for the below question: All assets are local on the device -- no network streaming is taking place. The videos contain audio tracks. I'm working on an iOS application that requires playing video files with minimum delay to start the video clip in question. Unfortunately we do not know what specific video clip is next until we actually need to start it up. Specifically: When one video clip is playing, we will know what the next set of (roughly) 10 video clips are, but we don't know which one exactly, until it comes time to 'immediately' play the next clip. What I've done to look at actual start delays is to call addBoundaryTimeObserverForTimes on the video player, with a time period of one millisecond to see when the video actually started to play, and I take the difference of that time stamp with the first place in the code that indicates which asset to start playing. From what I've seen thus-far, I have found that using the combination of AVAsset loading, and then creating an AVPlayerItem from that once it's ready, and then waiting for AVPlayerStatusReadyToPlay before I call play, tends to take between 1 and 3 seconds to start the clip. I've since switched to what I think is roughly equivalent: calling [AVPlayerItem playerItemWithURL:] and waiting for AVPlayerItemStatusReadyToPlay to play. Roughly same performance. One thing I'm observing is that the first AVPlayer item load is slower than the rest. Seems one idea is to pre-flight the AVPlayer with a short / empty asset before trying to play the first video might be of good general practice. [http://stackoverflow.com/questions/900461/slow-start-for-avaudioplayer-the-first-time-a-sound-is-played] I'd love to get the video start times down as much as possible, and have some ideas of things to experiment with, but would like some guidance from anyone that might be able to help. Update: idea 7, below, as-implemented yields switching times of around 500 ms. This is an improvement, but it it'd be nice to get this even faster. Idea 1: Use N AVPlayers (won't work) Using ~ 10 AVPPlayer objects and start-and-pause all ~ 10 clips, and once we know which one we really need, switch to, and un-pause the correct AVPlayer, and start all over again for the next cycle. I don't think this works, because I've read there is roughly a limit of 4 active AVPlayer's in iOS. There was someone asking about this on StackOverflow here, and found out about the 4 AVPlayer limit: fast-switching-between-videos-using-avfoundation Idea 2: Use AVQueuePlayer (won't work) I don't believe that shoving 10 AVPlayerItems into an AVQueuePlayer would pre-load them all for seamless start. AVQueuePlayer is a queue, and I think it really only makes the next video in the queue ready for immediate playback. I don't know which one out of ~10 videos we do want to play back, until it's time to start that one. ios-avplayer-video-preloading Idea 3: Load, Play, and retain AVPlayerItems in background (not 100% sure yet -- but not looking good) I'm looking at if there is any benefit to load and play the first second of each video clip in the background (suppress video and audio output), and keep a reference to each AVPlayerItem, and when we know which item needs to be played for real, swap that one in, and swap the background AVPlayer with the active one. Rinse and Repeat. The theory would be that recently played AVPlayer/AVPlayerItem's may still hold some prepared resources which would make subsequent playback faster. So far, I have not seen benefits from this, but I might not have the AVPlayerLayer setup correctly for the background. I doubt this will really improve things from what I've seen. Idea 4: Use a different file format -- maybe one that is faster to load? I'm currently using .m4v's (video-MPEG4) H.264 format. I have not played around with other formats, but it may well be that some formats are faster to decode / get ready than others. Possible still using video-MPEG4 but with a different codec, or maybe quicktime? Maybe a lossless video format where decoding / setup is faster? Idea 5: Combination of lossless video format + AVQueuePlayer If there is a video format that is fast to load, but maybe where the file size is insane, one idea might be to pre-prepare the first 10 seconds of each video clip with a version that is boated but faster to load, but back that up with an asset that is encoded in H.264. Use an AVQueuePlayer, and add the first 10 seconds in the uncompressed file format, and follow that up with one that is in H.264 which gets up to 10 seconds of prepare/preload time. So I'd get 'the best' of both worlds: fast start times, but also benefits from a more compact format. Idea 6: Use a non-standard AVPlayer / write my own / use someone else's Given my needs, maybe I can't use AVPlayer, but have to resort to AVAssetReader, and decode the first few seconds (possibly write raw file to disk), and when it comes to playback, make use of the raw format to play it back fast. Seems like a huge project to me, and if I go about it in a naive way, it's unclear / unlikely to even work better. Each decoded and uncompressed video frame is 2.25 MB. Naively speaking -- if we go with ~ 30 fps for the video, I'd end up with ~60 MB/s read-from-disk requirement, which is probably impossible / pushing it. Obviously we'd have to do some level of image compression (perhaps native openGL/es compression formats via PVRTC)... but that's kind crazy. Maybe there is a library out there that I can use? Idea 7: Combine everything into a single movie asset, and seekToTime One idea that might be easier than some of the above, is to combine everything into a single movie, and use seekToTime. The thing is that we'd be jumping all around the place. Essentially random access into the movie. I think this may actually work out okay: avplayer-movie-playing-lag-in-ios5 Which approach do you think would be best? So far, I've not made that much progress in terms of reducing the lag.

    Read the article

  • Using jQuery to Insert a New Database Record

    - by Stephen Walther
    The goal of this blog entry is to explore the easiest way of inserting a new record into a database using jQuery and .NET. I’m going to explore two approaches: using Generic Handlers and using a WCF service (In a future blog entry I’ll take a look at OData and WCF Data Services). Create the ASP.NET Project I’ll start by creating a new empty ASP.NET application with Visual Studio 2010. Select the menu option File, New Project and select the ASP.NET Empty Web Application project template. Setup the Database and Data Model I’ll use my standard MoviesDB.mdf movies database. This database contains one table named Movies that looks like this: I’ll use the ADO.NET Entity Framework to represent my database data: Select the menu option Project, Add New Item and select the ADO.NET Entity Data Model project item. Name the data model MoviesDB.edmx and click the Add button. In the Choose Model Contents step, select Generate from database and click the Next button. In the Choose Your Data Connection step, leave all of the defaults and click the Next button. In the Choose Your Data Objects step, select the Movies table and click the Finish button. Unfortunately, Visual Studio 2010 cannot spell movie correctly :) You need to click on Movy and change the name of the class to Movie. In the Properties window, change the Entity Set Name to Movies. Using a Generic Handler In this section, we’ll use jQuery with an ASP.NET generic handler to insert a new record into the database. A generic handler is similar to an ASP.NET page, but it does not have any of the overhead. It consists of one method named ProcessRequest(). Select the menu option Project, Add New Item and select the Generic Handler project item. Name your new generic handler InsertMovie.ashx and click the Add button. Modify your handler so it looks like Listing 1: Listing 1 – InsertMovie.ashx using System.Web; namespace WebApplication1 { /// <summary> /// Inserts a new movie into the database /// </summary> public class InsertMovie : IHttpHandler { private MoviesDBEntities _dataContext = new MoviesDBEntities(); public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; // Extract form fields var title = context.Request["title"]; var director = context.Request["director"]; // Create movie to insert var movieToInsert = new Movie { Title = title, Director = director }; // Save new movie to DB _dataContext.AddToMovies(movieToInsert); _dataContext.SaveChanges(); // Return success context.Response.Write("success"); } public bool IsReusable { get { return true; } } } } In Listing 1, the ProcessRequest() method is used to retrieve a title and director from form parameters. Next, a new Movie is created with the form values. Finally, the new movie is saved to the database and the string “success” is returned. Using jQuery with the Generic Handler We can call the InsertMovie.ashx generic handler from jQuery by using the standard jQuery post() method. The following HTML page illustrates how you can retrieve form field values and post the values to the generic handler: Listing 2 – Default.htm <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Add Movie</title> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> </head> <body> <form> <label>Title:</label> <input name="title" /> <br /> <label>Director:</label> <input name="director" /> </form> <button id="btnAdd">Add Movie</button> <script type="text/javascript"> $("#btnAdd").click(function () { $.post("InsertMovie.ashx", $("form").serialize(), insertCallback); }); function insertCallback(result) { if (result == "success") { alert("Movie added!"); } else { alert("Could not add movie!"); } } </script> </body> </html>     When you open the page in Listing 2 in a web browser, you get a simple HTML form: Notice that the page in Listing 2 includes the jQuery library. The jQuery library is included with the following SCRIPT tag: <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> The jQuery library is included on the Microsoft Ajax CDN so you can always easily include the jQuery library in your applications. You can learn more about the CDN at this website: http://www.asp.net/ajaxLibrary/cdn.ashx When you click the Add Movie button, the jQuery post() method is called to post the form data to the InsertMovie.ashx generic handler. Notice that the form values are serialized into a URL encoded string by calling the jQuery serialize() method. The serialize() method uses the name attribute of form fields and not the id attribute. Notes on this Approach This is a very low-level approach to interacting with .NET through jQuery – but it is simple and it works! And, you don’t need to use any JavaScript libraries in addition to the jQuery library to use this approach. The signature for the jQuery post() callback method looks like this: callback(data, textStatus, XmlHttpRequest) The second parameter, textStatus, returns the HTTP status code from the server. I tried returning different status codes from the generic handler with an eye towards implementing server validation by returning a status code such as 400 Bad Request when validation fails (see http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html ). I finally figured out that the callback is not invoked when the textStatus has any value other than “success”. Using a WCF Service As an alternative to posting to a generic handler, you can create a WCF service. You create a new WCF service by selecting the menu option Project, Add New Item and selecting the Ajax-enabled WCF Service project item. Name your WCF service InsertMovie.svc and click the Add button. Modify the WCF service so that it looks like Listing 3: Listing 3 – InsertMovie.svc using System.ServiceModel; using System.ServiceModel.Activation; namespace WebApplication1 { [ServiceBehavior(IncludeExceptionDetailInFaults=true)] [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class MovieService { private MoviesDBEntities _dataContext = new MoviesDBEntities(); [OperationContract] public bool Insert(string title, string director) { // Create movie to insert var movieToInsert = new Movie { Title = title, Director = director }; // Save new movie to DB _dataContext.AddToMovies(movieToInsert); _dataContext.SaveChanges(); // Return movie (with primary key) return true; } } }   The WCF service in Listing 3 uses the Entity Framework to insert a record into the Movies database table. The service always returns the value true. Notice that the service in Listing 3 includes the following attribute: [ServiceBehavior(IncludeExceptionDetailInFaults=true)] You need to include this attribute if you want to get detailed error information back to the client. When you are building an application, you should always include this attribute. When you are ready to release your application, you should remove this attribute for security reasons. Using jQuery with the WCF Service Calling a WCF service from jQuery requires a little more work than calling a generic handler from jQuery. Here are some good blog posts on some of the issues with using jQuery with WCF: http://encosia.com/2008/06/05/3-mistakes-to-avoid-when-using-jquery-with-aspnet-ajax/ http://encosia.com/2008/03/27/using-jquery-to-consume-aspnet-json-web-services/ http://weblogs.asp.net/scottgu/archive/2007/04/04/json-hijacking-and-how-asp-net-ajax-1-0-mitigates-these-attacks.aspx http://www.west-wind.com/Weblog/posts/896411.aspx http://www.west-wind.com/weblog/posts/324917.aspx http://professionalaspnet.com/archive/tags/WCF/default.aspx The primary requirement when calling WCF from jQuery is that the request use JSON: The request must include a content-type:application/json header. Any parameters included with the request must be JSON encoded. Unfortunately, jQuery does not include a method for serializing JSON (Although, oddly, jQuery does include a parseJSON() method for deserializing JSON). Therefore, we need to use an additional library to handle the JSON serialization. The page in Listing 4 illustrates how you can call a WCF service from jQuery. Listing 4 – Default2.aspx <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Add Movie</title> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/json2.js" type="text/javascript"></script> </head> <body> <form> <label>Title:</label> <input id="title" /> <br /> <label>Director:</label> <input id="director" /> </form> <button id="btnAdd">Add Movie</button> <script type="text/javascript"> $("#btnAdd").click(function () { // Convert the form into an object var data = { title: $("#title").val(), director: $("#director").val() }; // JSONify the data data = JSON.stringify(data); // Post it $.ajax({ type: "POST", contentType: "application/json; charset=utf-8", url: "MovieService.svc/Insert", data: data, dataType: "json", success: insertCallback }); }); function insertCallback(result) { // unwrap result result = result["d"]; if (result === true) { alert("Movie added!"); } else { alert("Could not add movie!"); } } </script> </body> </html> There are several things to notice about Listing 4. First, notice that the page includes both the jQuery library and Douglas Crockford’s JSON2 library: <script src="Scripts/json2.js" type="text/javascript"></script> You need to include the JSON2 library to serialize the form values into JSON. You can download the JSON2 library from the following location: http://www.json.org/js.html When you click the button to submit the form, the form data is converted into a JavaScript object: // Convert the form into an object var data = { title: $("#title").val(), director: $("#director").val() }; Next, the data is serialized into JSON using the JSON2 library: // JSONify the data var data = JSON.stringify(data); Finally, the form data is posted to the WCF service by calling the jQuery ajax() method: // Post it $.ajax({   type: "POST",   contentType: "application/json; charset=utf-8",   url: "MovieService.svc/Insert",   data: data,   dataType: "json",   success: insertCallback }); You can’t use the standard jQuery post() method because you must set the content-type of the request to be application/json. Otherwise, the WCF service will reject the request for security reasons. For details, see the Scott Guthrie blog post: http://weblogs.asp.net/scottgu/archive/2007/04/04/json-hijacking-and-how-asp-net-ajax-1-0-mitigates-these-attacks.aspx The insertCallback() method is called when the WCF service returns a response. This method looks like this: function insertCallback(result) {   // unwrap result   result = result["d"];   if (result === true) {       alert("Movie added!");   } else {     alert("Could not add movie!");   } } When we called the jQuery ajax() method, we set the dataType to JSON. That causes the jQuery ajax() method to deserialize the response from the WCF service from JSON into a JavaScript object automatically. The following value is passed to the insertCallback method: {"d":true} For security reasons, a WCF service always returns a response with a “d” wrapper. The following line of code removes the “d” wrapper: // unwrap result result = result["d"]; To learn more about the “d” wrapper, I recommend that you read the following blog posts: http://encosia.com/2009/02/10/a-breaking-change-between-versions-of-aspnet-ajax/ http://encosia.com/2009/06/29/never-worry-about-asp-net-ajaxs-d-again/ Summary In this blog entry, I explored two methods of inserting a database record using jQuery and .NET. First, we created a generic handler and called the handler from jQuery. This is a very low-level approach. However, it is a simple approach that works. Next, we looked at how you can call a WCF service using jQuery. This approach required a little more work because you need to serialize objects into JSON. We used the JSON2 library to perform the serialization. In the next blog post, I want to explore how you can use jQuery with OData and WCF Data Services.

    Read the article

< Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668  | Next Page >