Search Results

Search found 26947 results on 1078 pages for 'util linux'.

Page 662/1078 | < Previous Page | 658 659 660 661 662 663 664 665 666 667 668 669  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Problem installing drivers for Brother DCP-1400

  - by ToddB

  I have a problem installing drivers for my DCP-1400 printer. I am using Ubuntu 11.10 and am new to Ubuntu and Linux in general. I downloaded the lpr and cupswrapper files from the Brother linux site into my Download directory. I next run Terminal and switch to the Downloads directory. At the prompt I type in the following: sudo dpkg -i --force-all dcp1400lpr-1.1.2-1.386.deb It asks for my password which I type in and press Enter. I get the following errors: (Reading database ... 155195 files and directories currently installed.) Preparing to replace dcp1400lpr 1.1.2-1 (using dcp1400lpr-1.1.2-1.i386.deb) ... Unpacking replacement dcp1400lpr ... /var/lib/dpkg/info/dcp1400lpr.postrm: 3: /etc/init.d/lpd: not found dpkg: warning: subprocess old post-removal script returned error exit status 127 dpkg - trying script from the new package instead ... /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error processing dcp1400lpr-1.1.2-1.i386.deb (--install): subprocess new post-removal script returned error exit status 127 /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 127 Errors were encountered while processing: dcp1400lpr-1.1.2-1.i386.deb I now notice when I open the Synaptics package manager I get the message: E: The package dcp1400lpr needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report. Any help provided would be appreciated. Thank you TB

  Read the article

• Running CORN job on Ubuntu server for SugarCRM

  - by Logik

  i am pretty inexperienced in Linux.So be descriptive on your answer. My environment :Local Linux server 12.04 hosting Sugar CRM 6.5.2. There is area in sugar CRM called scheduler. I can configured some predefined jobs here. in my case i am trying to run email reminders (ever min/hour/day/month). For this scheduler to be effective, i read some where i need to setup CRON job. So i did some research & finally put following lines in CRONTAB for the root user, as per instructions given in sugarCRM. cd /var/www/crm; php -f cron.php /dev/null 2&1 Well i am creating contracts in my sugarCRM (AOS module) & i want email reminders to be sent for these contracts to the concern person. Now my sugarCRM email is configured correctly & i can send test emails using it. But the CRON + scheduler not giving any result. I can't receive any emails. Then i tried to read /var/log/syslog & it is showing entry for following line each minute. Oct 27 15:03:01 unicomm CRON[28182]: (root) CMD (cd /var/www/crm; php -f cron.php /dev/null 2&1) I've few questions: 1) what does the CRON job line i've added in crontab mean? cd /var/www/crm; php -f cron.php /dev/null 2&1 is not making any sense to me. 2) How am i suppose to get this thing work? I've searched a lot (including SugarCRM forum), but no luck.

  Read the article

• Cannot Restore GRUB (Ubuntu 11.04 + Win 7)

  - by Benny

  I'm trying to fix GRUB on my PC, but I'm running into serious issues doing so. Any help would be greatly appreciated as I'm completely crippled right now. Here is the sequence of events for this PC: Installed Windows 7 Split full disk into two partitions (one for win7 and one for multimedia) Long time passed Split one of the partitions into two again Installed Ubuntu 11.04 on new partition A little time passed Windows 7 acting up, reinstall Ubuntu GRUB gone Tried restoring GRUB by mounting and grub-install from live USB Tried switching to a live CD instead of USB (thinking it might be the drive) Now I don't see GRUB and I'm getting "input/output" errors An example i/o error: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe86aff6 Device Boot Start End Blocks Id System /dev/sda1 * 1 48727 391393280 7 HPFS/NTFS /dev/sda2 48727 77063 227612647+ 7 HPFS/NTFS /dev/sda3 77063 91202 113566721 5 Extended /dev/sda5 77063 90622 108908544 83 Linux /dev/sda6 90622 91202 4657152 82 Linux swap / Solaris ubuntu@ubuntu:~$ sudo mount /dev/sda5 /mnt ubuntu@ubuntu:~$ sudo grub-install --root-directory=/mnt /dev/sda mkdir: cannot create directory `/mnt/boot': Input/output error ubuntu@ubuntu:~$ cd /mnt ubuntu@ubuntu:/mnt$ ls ls: cannot access etc: Input/output error

  Read the article

• CentOS/Apache killing connections

  - by fin1te

  Getting a really strange error. Basically, whenever I browse to my server (http://[ip_address] or http://[hostname]), it doesn't load, and my active SSH connection drops out. I installed CentOS 5.5, and then httpd and PHP 5.3. No other applications where installed, so I can't imagine it's something else causing it. I also reinstalled CentOS 5.5 again, completely fresh, the only thing I did to it was yum install httpd, and it still caused this issue. I've changed nothing in the config or anything else. Driving me mad, has anyone heard of this? It's really frustrating since everytime I attempt to debug this issue, I get kicked off SSH and have to log back in. Theres nothing in the Apache error logs, and nothing in the access log recording my attempt. Also, the result from uname - Linux [hostname] 2.6.35.4-rscloud #8 SMP Mon Sep 20 15:54:33 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux Thank you

  Read the article

• Heading Out to Oracle Open World

  - by rickramsey

  In case you haven't figured it out by now, Oracle reserves an awful lot of announcements for Oracle Open World. As a result, the show is always a lot of fun for geeks. What will the Oracle Solaris team have to say? Will the Oracle Linux team have any surprises? And what about Oracle hardware? For my part, I'll be one of the lizards at the OTN Lounge with the OTN crew, handing out t-shirts to system admins and developers, or anyone who is willing to impersonate one. I understand, not everyone can have the raw animal magnetism of a sysadmin, or the debonair sophistication of a C++ developer, so some of you have no choice but to pretend. I won't judge. I'll also be doing video interviews of as many techie people as I can corner. I've got more than 30 interviews already scheduled. Most of them will be 3-5 minutes long. I'll be asking our best technical minds what's cool about their latest technologies and what impact it will have on system admins or system developers. I'll be posting those videos here: Find OTN Systems Videos from Oracle Open World Here! We've got some great topics in mind. A dummies guide to hardware-assisted cryptography with Glenn Brunette. ZFS deduplication. The momentum building around Oracle Solaris 11, with Lynn Rohrer, plus conversations with partners who have deployed Oracle Solaris 11. Migrating to Oracle Database with SQL Developer. The whole database cloud thing. Oracle VM and, of course, Oracle Linux. So even if you can't be part of the fun, keep an eye out for the videos on our YouTube channel. - Rick Website Newsletter Facebook Twitter

  Read the article

• Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

  - by AndyAtTheWebists

  I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

  Read the article

• Why ping another innet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• ATI Radeon Triple Monitor Setup

  - by Zak

  I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

  Read the article

• Free OCSP server for testing purposes?

  - by StackedCrooked

  Can anyone recommend a free and simple OCSP server for Windows or Linux?

  Read the article

• b43 module loaded, but no interface showed up

  - by Eduardo Bezerra

  I'm using CentOS 6.3 x86_64 on a hardware with a BCM43224 chip for wi-fi. I installed the b43-fwcutter module and then run modprobe b43, with no error messages. However, no new network interface showed up, and the return of iwconfig is: lo no wireless extensions. eth0 no wireless extensions. lspci -nn | grep 43224 returns: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) and uname -a: Linux localhost.localdomain 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Any ideas of how to make the wireless device work?

  Read the article

• Help with the RT3290 Wireless adapter

  - by Potek

  I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

  Read the article

• Is there an open source clone of a game in the Total War Series?

  - by sinekonata

  I loved Shogun:Total War gameplay and then later on spent weeks re-enacting historical wars and battles with Europa Barbarorum. It's a mod for Rome:TW that focuses on historical accuracy in the peoples, units, sounds, visuals, everything from macro mechanics to actual battles (e.g. a lot more missiles). Since that time I kind of turned my back on Windows cause it sucks and use Linux cause Mac sucks even worse. So as I miss that game (Eur. Barb.) and consider it the most realistic RTS to date, I'd like to know if there are any free and open source alternatives to it because ever since I'm under linux, I became addicted to FOSS so I also turned my back on paying (even kickstarters) for closed source, pay to play games. I have found a clone/alternative for everyone of the best games like Minecraft, CSS, Natural Selection, TA/SupCom etc... It's kind of the last one I need. The Spring engine is amazing for example, is there another open source project of the source in current development? Or would Spring itself be enough (it certainly looks capable) to make it? Thanks in advance guys...

  Read the article

• How to switch to a generic kernel in a headless Ubuntu Server 12.04?

  - by chmike

  I just got a dedicated server with Ubuntu 12.04 installed with a custom compiled kernel. Since I would like to install VirtualBox and this custom kernel doesn't support dynamic module loading (for security) I need to change the kernel. I'm running some Ubuntu servers for years but never palyed with grub and a headless computer. When the command update-grub is run it shows the different kernel it finds. Here is what I see Generating grub.cfg ... Found linux image: /boot/bzImage-3.2.13-xxxx-grs-ipv6-64 Found linux image: /boot/vmlinuz-3.2.0-34-generic Found initrd image: /boot/initrd.img-3.2.0-34-generic No volume groups found done The first one is the active one as seen with uname -r. To me it looks like the second kernel is the one I should use. But I don't know how to configure grub2 to use it. The computer is also configured with a software RAID using mdadm I guess. Never used that before. I don't know if playing with the grub of changing kernel could brake this. What must I do to set the generic kernel as the default one so that I can get VirtualBox running.

  Read the article

• openvpn and virtualbox

  - by hyperboreean

  Hi guys, I have a linux machine on which I occasionally run Windows XP in Virtual Box. All runs wonderful, except for the openvpn in XP, which can't connect to the vpn server running on a remote machine. The vpn client works from linux ... as far as I read until now it seems to be a problem of port forwarding ... I keep getting this error: TCP/UDP: Incoming packet rejected from 10.0.2.2:1194, expected peer address: (allow this incoming source address/port by removing --remote or adding --float) , but have no idea how to fix it.

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Should I use structure from a core library graphic toolkit in my domain?

  - by Laurent Bourgault-Roy

  In java (and many other programming language), there are often structure to deal with graphic element : Colour, Shape, etc. Those are most often in a UI toolkit and thus have a relatively strong coupling with UI element. Now, in the domain of my application, we often deal with colour, shape, etc, to display statistic information on an element. Right now all we do with it is display/save those element with little or no behaviour. Would it make sense to avoid "reinventing the wheel" and directly use the structures in java.awt.* or should I make my own element and avoid a coupling to this toolkit? Its not like those element are going away anytime soon (they are part of the core java library after all), but at the same time it feel weird to import java.awt.* server side. I have no problem using java.util.List everywhere. Should I feel different about those class? What would be the "recommended" practice in that case?

  Read the article

• First Installation

  - by Dj Zia

  I had windows xp on my desktop originally. Yesterday we were able to replace this with Ubuntu 12.04 from a thumb drive. The live CD did not work. I am more familiar with the system they introduced me to in School recently. Linux pretty much has similarity all around so I am finding the differences not as much of an issue. So, there were a few issues with the installation and getting Grub to start working. There is the low graphics issue which brings us to the command line basics. I am a little familiar with linux so it isn't too intimidating; I am really good with step by step instructions in simple order. My question is Ubuntu installed with out any basic driver's or generic header's. It also is not connecting my computer to the internet. My system is older not new. For the time it had above average parts. How do I solve the problem of Getting the header's, making sure the right configurations are set, and where do I get the driver's for my white box desktop to run Ubuntu properly? Thank you

  Read the article

• How do I make a USB stick from which to install different OS's?

  - by Hanno Fietz

  Recently, I have made a number of USB sticks to install OS's (several Linux flavors, BSD, Windows) from, on machines that didn't have CD drives. Now, I would prefer to not overwrite the install USB sticks all the time, since it's handy to have them, but neither do I want to pile up USB sticks that I only need every 6 months. It would be great to have a bootable USB stick that fires up some minimal system, lets you choose an ISO image and then reboots from there. How would I go about this? Do I use some minimal Linux? Is there some kind of modified / specialized boot loader? Can I set up GRUB to do this? Should I use virtualization?

  Read the article

• How the computer could be used by two users at the same time

  - by user59595

  Running windows 7 64, Is there any application that allows me to connect an additional keeyboard and mice and monitor, so that this can be used by other user at the samee time while I use the main computer, There is an application called cpnmouse but it doesnt work on win7, betwin crashes before win7 start up, teamplayer is too expensive Has anyone figured out this functionality maybe with virtual machinees or something, i've tried team player in a virtual machine but it crashes I have 3 monitors one of theem is a Tv, i would like that my girlfried uses it as a terminal without me loosing the focus cause she uses the mice There is a linux software called userful, but it's linux and doesnt work for me, and windows multipoint server needs a clean installation and also that's not a valid choice

  Read the article

• Windows 7: How to prevent Windows from caching my desktop wallpaper

  - by rmartz

  I have a service running that renders a changing wallpaper every 5 minutes or so, and replaces the current image file with the new one automatically (That is to say, new image but same filename). On Linux, the change is detected almost automatically, and so I have the most current wallpaper. However, on my Windows 7 machine (Which syncs the image with my Linux machine over Dropbox), it appears to cache the wallpaper from the last time I manually set the wallpaper. The image never changes, even if I restart. Is there a way to make Windows detect the file change, or periodically refresh the wallpaper cache? I'd like to avoid third-party apps if at all possible.

  Read the article

• How do I get my programs to communicate with each other

  - by Benjamin Lindqvist

  I'm basically just getting started with programming. The problem I have with progressing is that I have a hard time learning stuff just for the sake of knowing them - I do better when there's a problem to be solved or a task to be completed so I can learn 'on the job'. So I'm interested in starting some interesting project. I know the basics of Python, Java, Matlab and some C++ aswell and I know enough about microcontrollers to make LED blink etc. The type of stuff I'm looking for is for example scraping some weather forecast site (with Python) and outputting the chance of rain to a LCD display, or a program that makes chrome open and log in to facebook if I say "HAL, time for facebook", or more generally, a program that reads serial/USB input, looks for certain sequences and sends instructions to some other program if it finds one. Do you open some kind of shared stream in which one program reads and one writes? What do I need to read up on to do accomplish this myself? I have no experience with linux or the linux terminal, but looking over peoples shoulders makes me suspect that's what people use. Is that correct?

  Read the article

• Recover files after unsuccesfull partitioning

  - by arsan

  I wanted to install another Linux on my comp, so i tried to resize one of my NTFS partitions with Norton Partition Magic, but it didn't complete successfully and it showed some errors and said that the partition is not resized and that it's the same size like before, but when i rebooted my comp i couldn't open that partition anymore and also i am not able to mount it from my linux. So this is my question: I had very important data on that partition - can i recover it back ? I guess nothing's deleted it's just something messed up so it's not usable, but can i get it back ? Please if there's any possible way of doing it, reply to me, thank you.

  Read the article

< Previous Page | 658 659 660 661 662 663 664 665 666 667 668 669  | Next Page >