Search Results

Search found 22298 results on 892 pages for 'default'.

Page 664/892 | < Previous Page | 660 661 662 663 664 665 666 667 668 669 670 671  | Next Page >

• Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

  - by TheSamFrom1984

  2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• debian VM refusing all traffic apart from http

  - by james lewis

  I've got a VM with a fresh install of Debian (wheezy) and I've installed node and mongo on it. The VM is using a bridged network connection so I was expecting to be able to point my host machines browser at the ip address of the Debian VM (port 1337 for my node example or port 28017 for my mongo status page) and see one of the two services (node or mongo). My requests are refused though. As far as I can tell Debian allows all traffic by default and you have to manually configure iptables to drop traffic. I've checked iptables and it says it's setup to allow anything through. It looks like this: root@devbox:/home/jlewis# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination As a test I setup nginx and I was able to get to the nginx landing page from my host no problems so obviously http traffic is allowed. I then set nginx up to forward all traffic upstream to mongo - no problems there, I was able to see the status page. I then did the same for my example node server and again, no problems. So http traffic is fine, but all other traffic is blocked. Anyone know why debian might be refusing all other traffic other than iptables being setup to drop it? EDIT - output from netstat -nltp: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:28017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:51028 0.0.0.0:* LISTEN 1541/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2462/sshd tcp 0 0 127.0.0.1:1337 0.0.0.0:* LISTEN 2794/node tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2274/exim4 tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1510/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2189/nginx tcp6 0 0 :::22 :::* LISTEN 2462/sshd tcp6 0 0 :::45335 :::* LISTEN 1541/rpc.statd tcp6 0 0 ::1:25 :::* LISTEN 2274/exim4 tcp6 0 0 :::111 :::* LISTEN 1510/rpcbind

  Read the article

• Apache2/mod_fcgid/PHP Process Limits Not Respected

  - by Daniel

  I've recently moved to Apache2 / mod_fcgid / PHP from nginx / php_fpm. This is the second server on which I've made this migration, but it's used much less frequently than the first, which is working like a charm. The problem is in the PHP processes that it's spawning. In looking at the mod_fcgid documentation, it appears that the default for killing idle processes is 300 seconds; I've changed that to 20. At this point, I'd be fine if 300 would work - but it's not happening. It's been running for nearly a day now, and server-status shows 12 active processes: Process name: php5 Pid Active Idle Accesses State 19243 84879 14420 11 Ready Process name: php5 Pid Active Idle Accesses State 20954 82143 149 22 Ready 20947 82149 149 22 Ready 20953 82143 149 13 Ready Process name: php5 Pid Active Idle Accesses State 20589 82765 23644 72 Ready Process name: php5 Pid Active Idle Accesses State 17663 86103 2034 117 Ready Process name: php5 Pid Active Idle Accesses State 19862 83961 1976 91 Ready Process name: php5 Pid Active Idle Accesses State 18495 85825 5164 18 Ready Process name: php5 Pid Active Idle Accesses State 25463 75109 23948 24 Ready Process name: php5 Pid Active Idle Accesses State 2466 60019 60016 2 Ready Process name: php5 Pid Active Idle Accesses State 20729 82541 12592 23 Ready Process name: php5 Pid Active Idle Accesses State 22135 80616 46361 6 Ready PHP applications are not being served at this point - Apache is returning a 503. However, it is still serving the server-status module, and mod_mono/Mono 2.10 applications are still being served. The problem is with the PHP. /etc/apache2/mods-available/fcgid.conf... <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi FcgidConnectTimeout 10 FcgidMaxRequestsPerProcess 500 FcgidIdleTimeout 20 FcgidFixPathinfo 1 FcgidMaxProcesses 10 </IfModule> (heh - Max Processes isn't being respected either...) Of course, fcgid.conf is smylinked in mods-enabled.

  Read the article

• Do all routers really must know all routes to every router?

  - by Philipili

  This is my complicated and long question. First let's talk about the context. Network topology: PC A --- RT A --- RT C --- RT B --- PC B (RT C has a WAN NIC connected to "the cloud") With this situation : PC A must send a packet to PC B Default routes direct packets to the cloud We haven't access to RT C's configuration RT C only knows how to join network A, not network B RT A knows about network B RT B knows about network A RT C's routing table: Destination NIC Gateway 0.0.0.0 WAN Cloud Network A LAN A RT A's WAN RT A's routing table: Destination NIC Gateway 0.0.0.0 WAN LAN A Network B WAN LAN A RT B's routing table: Destination NIC Gateway 0.0.0.0 WAN LAN B Network A WAN LAN B I would like to permit PC A and PC B to communicate, but I don't have access to RT C. Networks B and BC are new. Can PC A send a packet to RT B's WAN NIC (which is possible) and "ask RT B to direct the packet to PC B" ? I believe replacing RT B with a VPN server should do the trick, but I would like to know if it is possible to make it without establishing a new connection.

  Read the article

• Cannot find "IIS APPPOOL\{application pool name}" user account in Windows Server 2008

  - by MacGyver

  Normally when setting up IIS 7, I'm used to allowing permissions to user IIS APPPOOL\{application pool name} on the root folder of my web application(s). I also give permissions to IUSR (or the IIS_IUSRS user group. (Note, in Windows Server 2008, I found that IUSR isn't in that group by default, so I added it). In Windows Server 2008, I cannot find user IIS APPPOOL\{application pool name} under Security under the Windows Folder Properties. I'm using Windows Authentication in ASP.NET. I'm receiving a 401.1 on the page in Internet Explorer 8 after getting the authentication prompt. Mozilla Firefox also gave me a Windows authentication prompt, and got me into the site fine. Same with Google Chrome. How can I solve this one? HTTP Error 401.1 - Unauthorized You do not have permission to view this directory or page using the credentials that you supplied. Specific page information: Module: WindowsAuthenticationModule Notification: AuthenticateRequest Handler: PageHandlerFactory-ISAPI-4.0_32bit Error Code: 0x8009030e Requested URL: http://.....aspx Physical Path: C:\.........aspx Logon Method: Not yet determined Logon User: Not yet determined

  Read the article

• Trouble installing SSL Certificate on Apache

  - by jahufar

  We have a dedicated server with GoDaddy running Plesk that requires SSL. I've generated the certificate files and I created a vhost_ssl.conf (since I can't edit the default plesk apache configuration http.include, vhost_ssl.conf gets Included to httpd.include) that tells apache where to find the certificate files: SSLCertificateFile /usr/local/psa/var/certificates/domain.com.crt SSLCertificateKeyFile /usr/local/psa/var/certificates/domain.com.key SSLCertificateChainFile /usr/local/psa/var/certificates/sub.class1.server.ca.pem When I stop/start apache, it refuses to start up. The error_log does not have anything on it either (which is strange). Then I opened up httpd.include and found this bit: <VirtualHost 208.xxx.xxx.xxx:443> ServerName domain.com:443 ServerAlias www.domain.com UseCanonicalName Off SSLEngine on SSLVerifyClient none SSLCertificateFile /usr/local/psa/var/certificates/certagC9054 Include /var/www/vhosts/domain.com/conf/vhost_ssl.conf Then I commented out SSLCertificateFile /usr/local/psa/var/certificates/certagC9054 (which is plesk's SSL certificate) and restarted apache and it worked perfectly fine. It seems that Apache does not like multiple SSLCertificateFile within the same VirtualHost directive? As anyone who worked with plesk knows, I can't just remove SSLCertificateFile directive in httpd.include as plesk will overwrite my changes when someone uses it - which is why it's in vhost_ssl.conf. So I'm stuck and this is beyond my meager admin skills. Would appreciate someone who knows what (s)he's doing to tell me whats going on. Thanks in advance.

  Read the article

• Why I am getting "Problem loading the page" after enabling HTTPS for Apache on Windows 7?

  - by Anish

  I enabled HTTPS on the Apache server (2.2.15) Windows 7 Enterprise by uncommenting: Include /private/etc/apache2/extra/httpd-ssl.conf in C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd.conf and modifying C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd-ssl.conf to include: DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs" ServerName myserver.com:443 ServerAdmin [email protected] ... SSLCertificateFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem SSLCertificateKeyFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/key.pem" Then I restart apache (going to start-All Progranms-Apache Server 2.2-Control-restart) and go to localhost on port 443 in Firefox , where I get: Index of / Index of / Links/ ..... .... But on Display of WebPage I see: Unable to connect Firefox can't establish a connection to the server at localhost. *The site could be temporarily unavailable or too busy. Try again in a few moments. *If you are unable to load any pages, check your computer's network onnection. *If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. I read: Why am I getting 403 Forbidden after enabling HTTPS for Apache on Mac OS X? and added default web server configuration block to match my DocumentRoot The error Log C:\Program Files (x86)\Apache Software Foundation\Apache2.2\logs\error.log gives following error: The Apache2.2 service is running. (OS 5)Access is denied. : Init: Can't open server certificate file C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem I checked the permissions for cert.pem and it indicates: All the permissions (Full control, Read, Read and modify, execute, Write) are marked for Admin and I am currently logged in as Admin. I tried using oldcert.pem and oldkey.pem on the same server and it works fine. Is there anything that I missed?

  Read the article

• How to use different scaling for every monitor?

  - by Mikael Koskinen

  One of the new features in Windows 8.1 is the new "Desktop display scaling", which allows user to configure scaling per monitor. I've been trying to get this working in preview but with no success. If I configure the scaling, it always affects all of my monitors. I have two monitors, the main one with a higher resolution and the secondary with "normal" resolution. The secondary monitor is used in portrait mode. I would like to configure the main monitor's scaling as the text is currently too small. Here's how things look at the configuration screen by default: Now if I adjust the scaling, click apply and do relogin, everything is bigger. On both of my monitors. I haven't clicked the "Let me choose one scaling level for all my displays", but still the slider seems to affect both of them. If I check the "Let me choose one scaling level", the UI changes to look similar to what we have in Windows 8: Still the problem persists. The scaling is applied to both of my monitors. So, it doesn't matter if I check the box or not, the scaling is always applied to all the displays. Any idea how I could get this to work in preview? I've read some comments which seem to indicate that this should work in preview, though Paul Thurrott mentioned at his Winsupersite article that he either didn't get this to work.

  Read the article

• SQL Server 2008 R2 - Cannot create database snapshot

  - by Chris Diver

  Server: Windows Server 2008 R2 X64 Enterprise SQL: SQL Server 2008 R2 Enterprise X64 I have a default SQL Server instance, the SQL Server service account is running as a domain user. I am trying to create a database snapshot in the directory where the mdf files are stored. The T-SQL syntax is correct. The file system is NTFS. The error message I get is: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 5119, Level 16, State 1, Line 1 Cannot make the file "e:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\TestDB.ss" a sparse file. Make sure the file system supports sparse files. The local SQLServerMSSQLUser$db$MSSQLSERVER group has Full Control permission on the folder where I am trying to create the snapshot. I can fix the problem in two ways, neither of which are suitable. Add the SQL Server service (domain) account to the local Administrators group and restart the SQL service. Grant the local SQLServerMSSQLUser$db$MSSQLSERVER group Full control on E:\ I have tried to change the owner of the DATA directory to SQLServerMSSQLUser$db$MSSQLSERVER to no avail. I have no issue creating a new database Why can I not create a snapshot by giving permission only on the DATA folder? Update 23/09/2010: I have tried mrdenny's suggestion with no luck (but learned something new in the process), I suspect the problem may be due to the fact that the domain is a windows 2000 domain running in mixed mode. I had to install hotfix KB976494 for Server 2008 R2, as the SQL Server 2008 R2 installer would not verify the service account correctly with the domain. I noticed that Server 2000 isn't a supported operating system for SQL 2008 R2 but cannot find anything that would suggest it shouldn't work in a 2000 domain. I dis-joined the test server from the domain and changed the service accounts to the local service account and I still have the same issue. I will try to re-install the server without joining the domain and without the hotfix and see if the issue persists.

  Read the article

• How do I make XTerm not use bold?

  - by mike

  I like using XTerm, I like its default "fixed" font, and I like using terminal colors rather than having a monochromatic terminal. However, XTerm seems to insist on using a bold version of the font whenever it's displaying a bright color: I hate hate hate the bold version of the font, but I like the brightness. The man page seems to suggest that adding "XTerm.VT100.boldMode:false" to my ~/.Xresources would disable this "feature", but it doesn't seem to have any effect. I've had it in there for months, so it's not a rebooting issue. How can I force XTerm to always use the standard, non-bold version of the fixed font, even when it's displaying bright text? Edit: Some have suggested putting "XTerm*boldMode: false" in my ~/.Xresources. That didn't help either. I've confirmed that the changes have taken effect with xrdb, though: $ xrdb -query | grep boldMode XTerm*boldMode: false And if i run xprop and click an xterm, I get "WM_CLASS(STRING) = "xterm", "XTerm"" .. so i'm definitely running real xterms. BTW, this is just a plain-vanilla Ubuntu Intrepid box. If anyone else here is running the same, can you try running: echo -e '#\e[1m#' ...and let me know whether the # on the right has a black pixel in the middle like the one on the left does?

  Read the article

• weird routes automatically being added to windows routing table

  - by simon

  On our windows 2003 domain, with XP clients, we have started seeing routes appearing in the routing tables on both the servers and the clients. The route is a /32 for another computer on the domain. The route gets added when one windows computer connects to another computer and needs to authenticate. For example, if computer A with ip 10.0.1.5/24 browses the c: drive of computer B with ip 10.0.2.5/24, a static route will get added on computer B like so: dest netmask gateway interface 10.0.1.5 255.255.255.255 10.0.2.1 10.0.2.5 This also happens on windows authenticated SQL server connections. It does not happen when computers A and B are on the same subnet. None of the servers have RIP or any other routing protocols enabled, and there are no batch files etc setting routes automatically. There is another windows domain that we manage with a near identical configuration that is not exhibiting this behaviour. The only difference with this domain is that it is not up to date with its patches. Is this meant to be happening? Has anyone else seen this? Why is it needed when I have perfectly good default gateways set on all the computers on the domain?!

  Read the article

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• Win2k8R2 / IIS 7.5 - users getting 503 response, no 503 error reported in logs

  - by merk

  I've got 2 web servers with mirrored content. There's a load balancer sitting in front of them. Starting yesterday we've been getting people complaining about 503 errors. i can't find any 503 errors in the IIS log file. However the server host is saying these errors are due to .Net errors in our website which are causing the app pool to recycle. They pointed out several errors in the windows application event log which look like this: Log Name: Application Source: ASP.NET 4.0.30319.0 Date: 3/31/2012 8:35:37 PM Event ID: 1309 Task Category: Web Event Level: Warning Keywords: Classic User: N/A Computer: 6251.local Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 3/31/2012 8:35:37 PM Event time (UTC): 4/1/2012 1:35:37 AM Event ID: e7a580c7b38545cca3416a8595408f24 Event sequence: 97 Event occurrence: 1 Event detail code: 0 Application information: Application domain: /LM/W3SVC/2/ROOT-1-129777167518960645 Trust level: Full Application Virtual Path: / Application Path: C:\inetpub\wwwroot\mywebsite\ Machine name: 6252 Process information: Process ID: 20000 Process name: w3wp.exe Account name: IIS APPPOOL\MyAppPool In particular they are saying that the account name under Process Information indicates that the app pool is recycling. They said if the app pool were not recycle, the accountname would instead be the folder where the website files are located. I checked the app pool settings - it's set to recycle every 29 hours. And the rapid fail protection is set to the default of 5 failures in 5 minutes. But i have not seen 5 failures in the event log in that short of a time span. Can anyone help me confirm if the 503 responses are indeed being generated by the app pools recycling? Or are these errors coming from somewhere else? My guess at the time was their load balancer was the one actually returning the 503 error. But that was just a guess.

  Read the article

• Changing Mac OS X 10.6 Routing after VPN'd In

  - by Matt Rogish

  I have a coffee shop around the corner that I use to do some work when I want to get away from home. They offer free wi-fi and I then use my Mac 10.6 VPN to log into my work network. I have "Send all traffic over VPN connection" checked. Before, their network was 10.0.0.x. I think they got a new router because it's now 192.168.2.x However, this interferes with one of the subnets at work so now I can't visit 192.168.2.x at work. So: 1) Office network: VPN gives IPs as 192.168.1.x. Another network is 192.168.2.x 2) Coffee network: Gives IPs as 192.168.2.x I think if I set a route to send all 2.x traffic over the tunnel, it would blow up my routing to their system, right? What should I do? I know the individual IPs of the servers I want... Maybe I could add each one, or can I add all of them minus the default gateway of their router? How do I set that up "temporarily" in my Mac? Thanks!!

  Read the article

• Apache mod_proxy with SSL not redirecting

  - by simonszu

  I have a custom server running behind an apache reverse proxy. Since the custom server can only handle HTTP traffic, i am trying to use apache for wrapping proper SSL around it, and for some kind of HTTP authentication. So i enabled mod_proxy and mod_ssl and modified sites-available/default-ssl. The config is as following: <Location /server> order deny,allow allow from all AuthType Basic AuthName "Please log in" AuthUserFile /etc/apache2/htpasswd Require valid-user ProxyPass http://192.168.1.102:8181/server ProxyPassReverse http://192.168.1.102:8181/server </Location> The custom server is accessible from the internal network via the location specified in the ProxyPass directive. However, when the proxy is accessed from the outside, it presents the login prompt, and after successfully authenticated, i get a blank page with the words The resource can be found at http://192.168.1.102:8181/server. When i type the external URL again in an already authenticated browser instance, i am properly redirected to the server frontend. The access.log is full of entrys stating that my browser does successful GET requests, and the proxy is happily serving the /server ressource. However, the ressource isn't containing the server's frontend, but this blank page with these words on it.

  Read the article

• OpenBSD logins via SSH seem to be ignoring my configured radius server

  - by Steve Kemp

  I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

  Read the article

• Proxying from nginx to Jetty

  - by newbie

  I'm proxying request from nginx to Jetty, but I have problem with request that Jetty receives. Jetty requests shows that request IP address is 127.0.0.1. But I want real server IP and my site has multiple domains, so when request is coming from some domain name to my server, it must available in Jetty request too. nginx config: server { listen 80; ## listen for ipv4 listen [::]:80 default ipv6only=on; ## listen for ipv6 server_name localhost; access_log /var/log/nginx/localhost.access.log; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header X-Real-IP $remote_addr; } } Servlet request: Dump Servlet getMethod: GET getContentLength: -1 getContentType: null getRequestURI: /dump/info getRequestURL: http://127.0.0.1:8080/dump/info getContextPath: getServletPath: /dump getPathInfo: /info getPathTranslated: /tmp/jetty-0.0.0.0-8080-test.war-_-any-/webapp/info getQueryString: null getProtocol: HTTP/1.0 getScheme: http getServerName: 127.0.0.1 getServerPort: 8080 getLocalName: 127.0.0.1 getLocalAddr: 127.0.0.1 getLocalPort: 8080 getRemoteUser: null getUserPrincipal: null getRemoteAddr: 127.0.0.1 getRemoteHost: 127.0.0.1 getRemotePort: 50905 getRequestedSessionId: 6ubs42zhm5q61k5hm84ni3ib isSecure(): false isUserInRole(admin): false getLocale: en_US getLocales: en_US getLocales: en

  Read the article

• Concerns about Apache per-Vhost logging setup

  - by etienne

  I'm both senior developer and sysadmin in my company, so i'm trying to deal with the needs of both activities. I've set up our apache box, wich deals with 30-50 domains atm (and hopefully will grow larger) and hosts both production and development sites, with this directory structure: domains/ domains/domain.ext/ #FTPS chroot for user domain.ext domains/domain.ext/public #the DocumentRoot of http://domain.ext domains/domain.ext/logs domains/domain.ext/subdomains/sub.domain.ext domains/domain.ext/subdomains/sub.domain.ext/public #DocumentRoot of http://sub.domain.ext Each domain.ext Vhost runs with his dedicated user and group via mpm-itk, umask being 027, and the logs are stored via a piped sudo command, like this: ErrorLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_error.log" CustomLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_access.log" combined Now, i've read a lot about not letting the logs out of a very restricted directory, but the developers often need to give a quick look to a particular subdomain error log, and i don't really want to give them admin rights to look into /var/logs. Having them available into the ftp account is REALLY handy during development stages. Do you think this setup is viable and safe enough? To me it is apparently looking good, but i'm concerned about 3 security issues: -is the sudo pipe enough to deal with symlink exploits? Any catches i'm missing? -log dos: logs are in the same partition of all domains. got hundreds of gigs, but still, if one get disk-space dos'd, everything will break. Any workaround? Will a short timed logrotate suffice? -file descriptors limits: AFAIK the default limit for Apache on Ubuntu Server is currently 8192, which should be plenty enough to handle 2 log files per subdomain. Is it? Am i missing something? I hope to read some thoughts on the matter!

  Read the article

• "unrecognized options" while installing php

  - by user1692333

  I want to compile php 5.4.8 on my mac 10.8.2, but get some errors which cant solve by my self, so need your help. Firstly i get default php options with php -i | head, after it do this command ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --sysconfdir=/private/etc --with-apxs2=/usr/sbin/apxs --enable-cli --with-config-file-path=/etc --with-libxml-dir=/usr --with-openssl=/usr --with-kerberos=/usr --with-zlib=/usr --enable-bcmath --with-bz2=/usr --enable-calendar --disable-cgi --with-curl=/usr --enable-dba --enable-ndbm=/usr --enable-exif --enable-fpm --enable-ftp --with-gd --with-freetype-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-jpeg-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-png-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --enable-gd-native-ttf --with-icu-dir=/usr --with-iodbc=/usr --with-ldap=/usr --with-ldap-sasl=/usr --with-libedit=/usr --enable-mbstring --enable-mbregex --with-mysql=mysqlnd --with-mysqli=mysqlnd --without-pear --with-pdo-mysql=mysqlnd --with-mysql-sock=/var/mysql/mysql.sock --with-readline=/usr --enable-shmop --with-snmp=/usr --enable-soap --enable-sockets --enable-sqlite-utf8 --enable-suhosin --enable-sysvmsg --enable-sysvsem --enable-sysvshm --with-tidy --enable-wddx --with-xmlrpc --with-iconv-dir=/usr --with-xsl=/usr --enable-zend-multibyte --enable-zip --with-pcre-regex --with-pgsql=/usr --with-pdo-pgsql=/usr But get this error config.status: creating Makefile config.status: creating jconfig.h config.status: jconfig.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --enable-cli, --with-config-file-path, --with-libxml-dir, --with-openssl, --with-kerberos, --with-zlib, --enable-bcmath, --with-bz2, --enable-calendar, --disable-cgi, --with-curl, --enable-dba, --enable-ndbm, --enable-exif, --enable-fpm, --enable-ftp, --with-gd, --with-freetype-dir, --with-jpeg-dir, --with-png-dir, --enable-gd-native-ttf, --with-icu-dir, --with-iodbc, --with-ldap, --with-ldap-sasl, --with-libedit, --enable-mbstring, --enable-mbregex, --with-mysql, --with-mysqli, --without-pear, --with-pdo-mysql, --with-mysql-sock, --with-readline, --enable-shmop, --with-snmp, --enable-soap, --enable-sockets, --enable-sqlite-utf8, --enable-suhosin, --enable-sysvmsg, --enable-sysvsem, --enable-sysvshm, --with-tidy, --enable-wddx, --with-xmlrpc, --with-iconv-dir, --with-xsl, --enable-zend-multibyte, --enable-zip, --with-pcre-regex, --with-pgsql, --with-pdo-pgsql Maybe someone have some suggestions on this?

  Read the article

• CentOS tftp server is broken

  - by Mike Pennington

  I'm trying to run tftpd from xinetd on CentOS 6; however, I can only tftp from localhost. I have a file in /opt/tftpboot/fw.test.conf that I can retrieve if I tftp to localhost: [mpenning@localhost ~]$ tftp localhost tftp> get fw.test.conf tftp> quit [mpenning@localhost ~]$ ls fw.test.conf [mpenning@localhost ~]$ However, I cannot receive this file if I tftp to eth1 on this server (the address on eth1 is 172.16.1.4). [mpenning@localhost ~]$ sudo tshark -i eth1 udp and host 172.16.1.5 Running as user "root" and group "root". This could be dangerous. Capturing on eth1 0.000000 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 5.000133 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 10.000184 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 15.000297 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 20.000331 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 ^C5 packets captured [mpenning@localhost ~]$ I have the following xinetd configuration: [root@localhost mpenning]# cat /etc/xinetd.d/tftp # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /opt/tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 } [root@localhost mpenning]#

  Read the article

• Make Google Chrome's address bar prefer page titles to domain names when offering completions?

  - by Ryan Thompson

  I've recently switched from Firefox to Chrome, and the thing I miss most from Firefox is the "Awesome Bar" that suggests completions for what I type primarily based on page titles, and then secondarily based on domain names. Chrome offers both matching URLs and titles, just like like Firefox, but Chrome seems to always prefer a matching domain name over a matching page title or a match to another part of the URL (besides the domain), no matter how many times I pass over the former for the latter. In fact, Chrome also prefers to suggest a search rather than matching anything other than a domain name. So is there any hidden preference I can change to tell Chrome that I care more about page titles than domain names? Example: I want to go to Google Reader, so I press Control+L and begin typing "reader". The URL for google reader is http://www.google.com/reader/view/#overview-page, so the domain name is www.google.com, which does not contain the word "reader". So the first option that Chrome suggests is either another site that has "reader" as part of the domain, or a search for "reader" with the default search engine. No matter how many times I scroll down and select Google Reader, Chrome never "learns" that that's what I want.

  Read the article

• I accidentally hijacked my localhost

  - by Zach L

  Opening localhost in the browser is pointing a local webpage (examplePage) after playing with some config files a while back, and I can't figure out how to restore the default behavior. Background: I have XAMPP installed on my Windows 7 machine, and a webpage at c:/xampp/htdocs/examplePage. A couple weeks ago, I was on a mission to get sites root-relative urls (/resource) to work, so I played around with a bunch of apache/conf files, including httpd.conf and httpd-vhosts.conf and also was messing with the Windows hosts file. I gave up at some point, didn't document exactly what I did, and have since probably forgotten some of what I did. Many of my changes stemmed from suggestions in this StackOverflow post What I've Tried I commented out my additions to the hosts file I turned off XAMPP (thus hopefully negating any apache config file effect) I reverted to my original DocumentRoot in httpd.conf anyway (xampp/htdocs) localhost still displays examplePage. Even with xampp turned on (my reverted DocmentRootisn't taking effect) Does anyone know what I may have done and how I can fix it? Update : Its been resolved, thank everyone so much in taskmanager, theres a couple instances of httpd.exe (Apache HTTP Server). I ended these, and opened XAMPP, restarting apache. all references to examplePage in my .conf files that I could find had been commented out or removed. I imagine that the old versions were still in effect for some reason, and manually ending the Apache processes fixed this. As a point of interest, Its still a mystery why those processes were running - I cannot reproduce that situation. I must've stumbled upon a XAMPP bug of some sort.

  Read the article

• Postfix not working

  - by user1488723

  A while ago I installed the postfix mail server on my ubuntu 10.04 VPS. At the time it was working good but now it's just stopped working. I was trying to enable SASL authentification and somewhere it must have went really wrong. I've studied the postfix main.cf and done everything in an orderly fashion to ensure that it is nothing wrong. I also have Dovecot installed and configured dovecot.conf to run with Postfix. If I try to do telnet localhost 25 while logged in on the server I just get: Connection closed by foreign host. If I try to do telnet mail.example.com 25 "from the outside" I get: telnet: Unable to connect to remote host: No route to host And when I check the server log after the failed attempts I see this: Jun 28 15:49:31 msv postfix/smtpd[11839]: initializing the server-side TLS engine Jun 28 15:49:31 msv postfix/smtpd[11839]: connect from localhost.localdomain[127.0.0.1] Jun 28 15:49:31 msv postfix/smtpd[11839]: warning: SASL: Connect to /var/spool/postfix/private/auth failed: Connection refused Jun 28 15:49:31 msv postfix/smtpd[11839]: fatal: no SASL authentication mechanisms Jun 28 15:49:32 msv postfix/master[11598]: warning: process /usr/lib/postfix/smtpd pid 11839 exit status 1 Jun 28 15:49:32 msv postfix/master[11598]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling main.cf file looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no delay_warning_time = 4h myhostname = mail.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydomain = example.com myorigin = $mydomain mydestination = $mydomain relayhost = mynetworks = 127.0.0.1 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_use_tls = yes smtpd_tls_loglevel = 2 smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_sasl_auth_enable = yes smtpd_client_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_security_options = noanonymous Dovecot.conf file looks like this: protocols = imap imaps disable_plaintext_auth = no log_timestamp = "%b %d %H:%M:%S " ssl = yes ssl_cert_file = /etc/postfix/ssl/smtpd.crt ssl_key_file = /etc/postfix/ssl/smtpd.key mail_location = maildir:~/mail mail_access_groups = mail auth_username_chars = abcdefghijklmnopqrstuvwxyz protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } auth default { mechanisms = plain login passdb pam { } userdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth user = postfix group = postfix mode = 0660 } } }

  Read the article

• Database mirroring login failure attempts on mirror server

  - by Chandan

  I have configured database mirroring between two servers at a distance 40 miles away from each other. Server specifications: SQL Server 2008,Standard Edition 64-bit This is same for principal,mirror and witness. The configuration is high-safety with automatic failover Initially we tested our .net application(web application) on both the principal and mirror and made sure that the login is not orpahned. Things run fine generally.But sometimes on the mirror server,I see login failed attempts: Login failed for user 'd0main\user'. Reason: Failed to open the explicitly specified database. [CLIENT: xx.xx.x.x] Message Error: 18456, Severity: 14, State: 38. This error appears 3-4 times a day but not more than that. My question to the experts is:If the principal is alive so why the application tries to connect to mirror.The default time-out for a .net webpage is 30 seconds,so is it possible that the application tries to connect principal and after 30 seconds even if principal is alive,it assumes that it is dead and thus tries to open a connection to mirror where it fails. Please help me with this problem.

  Read the article

< Previous Page | 660 661 662 663 664 665 666 667 668 669 670 671  | Next Page >