Search Results

Search found 19533 results on 782 pages for 'machine specifications'.

Page 665/782 | < Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >

• My PC is powercycling, what's going wrong?

  - by Renai

  So here is my sorry story of woe. My PC has been functioning normally for some time. Last week I bought a cheapish powered USB hub and plugged it into my home PC, which runs Windows 7. This weekend I plugged that hub into my home PC. At some stage I hibernated the PC. Then later on I plugged my Kobo eReader into the hub to charge. Later on I started the PC up. Only thing is, it now won’t start up. It just powercycles on for a second and a half with the fans at full, then powercycles off. Then back on for two seconds, then back off. There’s no display at all and it won’t get to the BIOS screen. It looks like anything USB is not functioning — the keyboard and mouse are not lighting up etc. I’ve taken out the BIOS battery and reseated the RAM, reseated the graphics card and so on, but my suspicion is that I have blown the USB section of the motherboard somehow. Suggestions? All else failing, where is the best place to take this machine in Sydney to get evaluated? It’s a fairly powerful beast, all up has cost me about $2500 over the years, including upgrades and a recent new graphics card, so can’t just start from scratch.

  Read the article

• How do I install Windows XP from an external hard drive?

  - by Plasmer

  I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

  Read the article

• Configure IIS site to work with host header & hosts file entry

  - by HarveySaayman

  I'm I bit of an IIS / Web noob (I'm a C# backend service / winforms dev) so please bare with me :-) I've set up a site in IIS on my local dev machine. In the bindings section of the site ive added 4 bindings, all 4 for http: Host Name Port IP Address blog.sourcecube.co.za 26581 * www.blog.sourcecube.co.za 26581 * blog.sourcecube.co.za 26581 127.0.0.1 www.blog.sourcecube.co.za 26581 127.0.0.1 in my hosts file (drivers\etc\hosts), i've added the folling entries: 127.0.0.1 blog.sourcecube.co.za 127.0.0.1 www.blog.sourcecube.co.za when i ping my domain name from the command line it does in fact resolve to the loopback address, 127.0.0.1. So what I'm expecting to happen when i navigate to blog.sourcecube.co.za in my browser is for it to resolve to 127.0.0.1, and when the request hits IIS, it should know which site to serve because of the host header? But when i navigate to blog.sourcecube.co.za, i get an "Unable to connect, Firefox can't establish a connection to the server at blog.sourcecube.co.za" error. What am I doing wrong? --- UPDATE --- Navigating to blog.sourcecube.co.za:26581 from my browser works... I'd like get it working without specifying the port number though.

  Read the article

• Massive Memory Leaks?

  - by Mads

  Hi, I seem to have huge memory leaks, which are confusing me. I'm running fusion 3.1 / Windows 7 on Snow Leopard. It's a clean install with all upgrades applied. I've given fusion 8GB on a 14GB machine. I've installed VS2008 & Eclipse in Windows 7. Nothing unusual. Inside Task Manager in Windows 7, my memory footprint stays reasonable, at <2GB. But in OSX, Activity Monitor shows the footprint of vmware-vmx to be much larger. It starts at 2 GB, which seems fine, but whenever I'm actually doing anything in Windows, vmware-vmx's footprint grows at a few MB per second. After 20 mins or so it's using ~10GB and everything grinds to a halt. Throughout this, Task Manager still says I'm only using 2GB. And whatever I do in windows seems to increase vmware-vmx's memory footprint. Even closing down an application seems to make it go up. So is this par for the course in fusion? I was previously using parallels 3 / Vista under Leopard, and it worked fine. I'd assumed my new fusion config would work better, but this makes it completely unusable. (And apparently I can't even ask tech support unless I buy a support package...) Any advice much appreciated. Thanks

  Read the article

• can't ssh from mac to windows (running ssh server on cygwin)

  - by Denise

  I set up an ssh server on a fresh windows 7 machine using the latest version of cygwin. Disabled the firewall. I can ssh into it from itself, from a different windows box (using winssh), and from a linux vm. In spite of that, I tried to ssh in from two different macs, and neither would let me! This is the debug output: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 3dbuild [172.18.4.219] port 22. debug1: Connection established. debug1: identity file /Users/Denise/.ssh/identity type -1 debug1: identity file /Users/Denise/.ssh/id_rsa type 1 debug1: identity file /Users/Denise/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5 debug1: match: OpenSSH_5.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '3dbuild' is known and matches the RSA host key. debug1: Found key in /Users/Denise/.ssh/known_hosts:43 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /Users/Denise/.ssh/identity debug1: Offering public key: /Users/Denise/.ssh/id_rsa Connection closed by [ip] It shows the same output, and fails at the same place, whether I have put my public key on the ssh server or not. Any help would be appreciated-- hopefully someone has run into this before?

  Read the article

• SVN, Samba and Symbolic Links. How to get them all to play together?

  - by Camsoft

  I've got a website project under version control that relies on files from an unversioned directory on the same server via Symbolic Links. I'm currently storing the symbolic links in the repository. The idea is that if someone checks out a working copy on to the same server they can edit and test the working copy of the project before committing it back to the repository. When they checkout their working copy it successfully sets up the symlinks so that the entire site works when testing. The users that work on the project are Windows users, so I've set a samba shares on the server and then mapped them to network drives in Windows. People can edit their working copies directly on the server via network shares and then test them in the web browser before committing their changes back to the repository via TortoiseSVN. The Problem The problem I have is that Samba resolves the symlinks as expected but when a user tries to commit their changes back to the repository, TortoiseSVN thinks the linked files are part of the project and tries to commit the target files to the repository and not the symlinks themselves. I tried turning off symlink support in samba which means that the linked files cannot be resolved as I don't really want people to have access to the linked files nor do I want to import the linked files in the repository. The problem with this is that I get Can't stat '\webserver\projects\working\project\symlinked_file.php'. Access is denied Apart from the symlink problem everything else works 100% perfectly. Users can either checkout website projects to their machine and work on them (but can't test) or checkout them out to their space on the dev web server and work on them and fully test. So I don't want to change the workflow process, I just need a solution to the symbolic link issue. Many thanks. Originally posted on StackOverflow: http://stackoverflow.com/questions/2400917/svn-samba-and-symbolic-links-how-to-get-them-all-to-play-together

  Read the article

• Organizing automatically Windows Files and Folders

  - by Kiquenet

  For Windows only, Organizing the eleventy-billion files you've got stuffed into folders on your hard drive is very "hard". For example, I have one folder on my computer that I save all web downloads to, regardless of file type, size or purpose. Many of the files are only temporary downloads, for instance setup files of applications that I test, demonstration videos that I watch once or documents that I want to read. Some files on the other hand are there to stay, and I used to move them out of the download folder manually in the past. Another files in folders in my computer: many source code, tests, programs, tools, ... I need tecnology for organize billion files. Which best tools for organize, sort, etc automatically your files-folders? Digital Janitor http://davidevitelaru.com/software/digital-janitor/ Belverede http://lifehacker.com/5510961/how-to-automatically-clean-and-organize-your-desktop-downloads-and-other-folders Download Mover http://www.neoteo.com/download-mover-reorganiza-tus-descargas-14188 File/Folder Date Organizer http://seedling.dcmembers.com/other/ffdorg.zip DropIt http://www.lupopensuite.com/db/dropit.htm Others issues about organization files, desktop, etc How to automate the process of organizing audio files on Windows Organizing My Windows Desktop What's a good way for organizing PDF documents on Windows? Folksonomy tagging for files What is your method of “folksonomy” tagging for files on your local machine?

  Read the article

• NFS confusion - writing many small files

  - by Antonis Christofides

  I have a Debian squeeze amd64 which is at the same time a NFS4 server and client (it mounts itself through NFS4). The local directory that leads directly to disk is /nfs4exports/mydir, whereas /nfs4mounts/mydir is the same thing mounted through NFS, using the machine's external IP address. Here is the line from fstab: 176.9.116.102:/mydir /nfs4mounts/mydir nfs4 soft 0 0 I have an application that writes many small files. If I write directly to /nfs4exports/mydir, it writes thousands of files per second; but if I write to /nfs4mounts/mydir, it writes 4 files per second or so. I can greatly increase speed if I add async to /etc/exports. (Writing a single large file to the NFS directory goes at more than 100 MB/s.) I am confused by the description of async in NFS. If my application accesses the local directory, system calls like write and close return even if caches have not been flushed to permanent storage. Apparently this is not true with NFS sync behaviour. However, with NFS async behaviour, even calls like fsync are ignored. Isn't it possible to work like local files, i.e. generally work asynchronously, but honour fsync and O_SYNC?

  Read the article

• IIS / Virtual Directory authentication.

  - by Chris L

  I have an IIS(v6)/Windows 2003/.Net 3.5(app code, libraries etc.) server hosting a website at www.mywebsite.com mapped to E:\Inetpub\wwwroot\mywebsite, we also have a virtual directory (VirtDir) mapped out to E:\Inetpub\wwwroot\mywebsite\files (although in theory this could be in a different directory or a separate machine) where we store a customer's files(a bunch of .pdf & .xls). Currently to access a file you can enter into the url something like: www.mywebsite.com/VirtDir/Customer/myFile.pdf and get access to the file. The problem is the user doesn't have to log into www.mywebsite.com to get access to the file, we would prefer them to log in first. We would like the user to login via the mywebsite and if valid, let them download files from the virtual directory. The www.mywebsite.com and VirtDir are separate sites on the same farm. Allow Anon Access, and Integrated Windows Authentication both enabled. I'm more of a developer and less of a Sys Admin, but hopefully I'm in the right spot, any help would be appreciated.

  Read the article

• Membership in two domains

  - by imagodei

  Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

  Read the article

• Does the OSS Backup Solution amanda.org support sparse files?

  - by user97961

  I want to (or better have to) do Backups of my KVM Virtual Machine images. I have searched for days for a good Backup Soloution. I know amanda is a very good solution. It would be kinf if someone kenn tell me if the following is supported: Trigger the Creation of LVM Snapshot (by invoking a Shell Script that I will write for that purpose) Do a Differential/Delta Backup on my KVM LVM qcow2 sparse file. = I only want to copy the actually changed bits/bytes (=Delta Backup). And it has to support that the file to be backuped up is a sparse file. (Rsync seems to have some kind of problems in regard to this (if the file does not exist yet on the other side... Then it will create a full file, not a sparse file)) Release the LVM Snapshot (By invoking a Script that I will write for that purpose) It's strange, I have nowhere found any documentation about this fact when searching the internet. Zmanda (Commercial Edition) has support vom XEN VM Backup (but not for KVM as far as I can tell)...

  Read the article

• Remote Desktop Zooming

  - by codeulike

  Using Remote Desktop from a device with a hi-res screen (say, a Surface Pro) is decidedly tricky - as everything displays 1:1 scale and so looks tiny. If the machine you are remoting into runs Server 2008 R2 or later, you can change the dpi zooming setting (see here). But for older hosts, that doesn't work. Using normal Remote Desktop, you can connect with a lower resolution, say 1280x768, and turn on smart-sizing. However smart-sizing can scale down (to display a huge desktop in a small area) but does not seem to scale up (to display a small desktop in a big area). Using the Windows 8 Remote Desktop App, you can zoom - but you cannot set the default resolution of the host. What I want is a lower resolution in the host, scaled up to fit my screen. So both of those are close to what I want, but dont quite work. So question is: Does the Remote Desktop App allow screen resolution to be set somehow? Is there some other Remote Desktop client that can handle zooming better?

  Read the article

• Start & shutdown as tomcat as non-root user

  - by user53864

  How to start, shutdown and restart tomcat as non-root user. I have tomcat5.x installed on ubuntu machine(usr/share/tomcat). The tomcat directory has full permissions. When I shutdown(/usr/share/tomcat/bin/shudown.sh) or startup(/usr/share/tomcat/startup.sh) tomcat as normal user, it starts & shuts down normally as if it is executed as root user but I could not access webpage even after starting tomcat as non-root user. user1@station2:/usr/share/tomcat/webapps$ ../bin/shutdown.sh Using CATALINA_BASE: /usr/share/tomcat Using CATALINA_HOME: /usr/share/tomcat Using CATALINA_TMPDIR: /usr/share/tomcat/temp Using JRE_HOME: /usr 4 Oct, 2010 6:41:11 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:310) at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:176) at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:163) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:384) at java.net.Socket.connect(Socket.java:546) at java.net.Socket.connect(Socket.java:495) at java.net.Socket.<init>(Socket.java:392) at java.net.Socket.<init>(Socket.java:206) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:421) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:337) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:415)

  Read the article

• Linux - preventing an application from failing due to lack of disk space [migrated]

  - by Jernej

  Due to an unpredicted scenario I am currently in need of finding a solution to the fact that an application (which I do not wish to kill) is slowly hogging the entire disk space. To give more context I have an application in Python that uses multiprocessing.Pool to start 5 threads. Each thread writes some data to its own file. The program is running on Linux and I do not have root access to the machine. The program is CPU intensive and has been running for months. It still has a few days to write all the data. 40% of the data in the files is redundant and can be removed after a quick test. The system on which the program is running only has 30GB of remaining disk space and at the current rate of work it will surely be hogged before the program finishes. Given the above points I see the following solutions with respective problems Given that the process number i is writing to file_i, is it safe to move file_i to an external location? Will the OS simply create a new instance of file_i and write to it? I assume moving the file would remove it and the process would end up writing to a "dead" file? Is there a "command line" way to stop 4 of the 5 spawned workers and wait until one of them finishes and then resume their work? (I am sure one single worker thread would avoid hogging the disk) Suppose I use CTRL+Z to freeze the main process. Will this stop all the other processes spawned by multiprocessing.Pool? If yes, can I then safely edit the files as to remove the redundant lines? Given the three options that I see, would any of them work in this context? If not, is there a better way to handle this problem? I would really like to avoid the scenario in which the program crashes just few days before its finish.

  Read the article

• PHP cannot connect to MySQL

  - by yogal

  Hello, I recently installed Apache 2 + PHP 5.3.1 + MySQL 5.1.44 on my Windows 7 64bit machine following this guide: http://sleeplessgeek.blogspot.com/2010/01/setting-up-apache-php-mysql-phpmyadmin.html It all went fine, php is working great (even with XDebug) but I cannot connect to mysql server. A simple script I wrote to test connection (yes, root has no pass): $username = "root"; $password = ""; $database = "test"; $hostname = "localhost"; $conn = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL Database!!"); It prints this error after 60sec of timeout: Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I can connect to mysql using cmdmysql -h localhost -u root Services are working properly. There also seems to be a problem with PhpMyAdmin (using 3.2.5). As soon as I type user and pass the page loads and turns blank (content-lenght in headers is 0 but status code is 302 Found). Looks like something wrong with cookies (my auth method). I hope someone has a clue, it has to be something dumb simple I missed. Thanks in advance.

  Read the article

• Good visuals supporting adopting Macintosh in a Windows company

  - by jdmuys

  I work in a Windows only software service company, which just put up an internal contest for innovative ideas for the company. The idea I submitted is to let employees use a Mac instead of the mandatory PC if they wished to. My idea has been selected (among a few others) to reach the next stage of the contest. One of the items requested for the next stage is ONE visual that best illustrates the idea. While my pitch is rather good (I think), I have a hard time coming up with ONE visual that would be suggestive enough and not too fanboy-ish, or too restricted. That's why I am requesting suggestions. For reference, some of the points I intend to develop are (not in order): de facto safety (little or no malware) Apple as a company reached its leading position through innovation (bio)diversity is a source of value for a service company, that expands its reach. it makes financial sense the Mac is the most compatible machine, making it a lot easier to test our software (especially web sites). Some OS X technologies can be valuable to a software service company (eg Applescript) Some Apple tools can help us improve (eg Keynote) It's good citizenship for our company as Apple is now best in class according to Greenpeace. I realize this question may be out of topic here. I'd be happy to have suggestions on where to post this question. Please do not argue why OS X might be better or worse than Windows. My question is very narrow. Thanks.

  Read the article

• When I try to access a website without www I get access denied.

  - by madphp

  I have an apache web server on a debian machine. I'm using virtualmin to administer virtual hosts. I have two sites on this server right now, when I try to access one site without the www in the URL I get an access denied. The other site is fine. The site with the problem is a cakephp app and has the following .htaccess file in the public_html folder. <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> Below is the directives for the problem domain. SuexecUserGroup "#1001" "#1001" ServerName mydomain.net ServerAlias www.mydomain.net ServerAlias webmail.mydomain.net ServerAlias admin.mydomain.net DocumentRoot /home/mydomain/public_html ErrorLog /var/log/virtualmin/mydomain.net_error_log CustomLog /var/log/virtualmin/mydomain.net_access_log combined ScriptAlias /cgi-bin/ /home/mydomain/cgi-bin/ ScriptAlias /awstats/ /home/mydomain/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/mydomain/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php AddHandler fcgid-script .php5 FCGIWrapper /home/mydomain/fcgi-bin/php5.fcgi .php FCGIWrapper /home/mydomain/fcgi-bin/php5.fcgi .php5 </Directory> <Directory /home/mydomain/cgi-bin> allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} =webmail.mydomain.net RewriteRule ^(.*) https://mydomain.net:20000/ [R] RewriteCond %{HTTP_HOST} =admin.mydomain.net RewriteRule ^(.*) https://mydomain.net:10000/ [R] RemoveHandler .php RemoveHandler .php5 IPCCommTimeout 31 <Files awstats.pl> AuthName "mydomain.net statistics" AuthType Basic AuthUserFile /home/mydomain/.awstats-htpasswd require valid-user </Files>

  Read the article

• Folder redirection GPO doesn't seem to be working

  - by user57999

  I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

  Read the article

• There are currently no logon servers available

  - by Ian Robinson

  I am running a Windows 7 laptop that is joined to my company's domain. When I installed Windows 7, I created an account for myself, joined to the domain, and it had been working quite well even though I'm physically remote most of the time, and not actually on the network. However, today I created a new local user account (non-admin) for my little brother. While he was using it, he decided he wanted to install a program, because his account is not an admin, he was prompted to enter Administrator credentials to allow the program to make changes to his computer. I entered my credentials, and this is the first time I ran into the error message: There are currently no logon servers available to service the logon request. I tried logging off and loggin back in, rebooting, etc etc, and no matter what, every time I try to authenticate as my "normal" domain account - I get that message. I can no longer access my computer as an administrator. I no longer know how to log in to my machine using any other account aside from my little brother's non-admin account. I don't have any other local accounts created, and the default local admin account was never enabled. I'd appreciate any ideas on how I can recover access to my account. Let me know if I can provide any more information. FYI - This is a similar question but not sure any of the answers help me in my case. http://serverfault.com/questions/71632/there-are-currently-no-logon-servers-available-to-service-the-logon-request

  Read the article

• RTNETLINK answers: File exists... maybe because assigned a new mac adress

  - by steven

  I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

  Read the article

• How can I stop IIS7 (integrated mode) from reporting a 404 before I get a chance to handle it?

  - by Gary McGill

  I have an ASP.NET MVC 2 application running on IIS7 in integrated mode. I'm trying to do my own 404 handling, but IIS7 seems to be intercepting the error and returning its own 404 message to the client before I get a chance to handle it. I'm not having much luck coming at the problem from a programming perspective over on Stack Overflow, so I wondered if maybe it's a configuration problem. Is there something I have to do to tell IIS to let me handle my own errors? (I'm trying to use Application_Error in my global.asax but it's not even getting there). There is a custom error page defined (at the machine level, I think) for 404 but when I tried removing that it didn't really help - it simply showed a bald one-liner message instead. My code still didn't get a look in. Is it perhaps something to do with the routing? Maybe the "mysite.com/nosuchpage" URL isn't being routed to me and that's why I don't get a chance to intercept it? Do I need to do something so that ALL requests get routed through my app?

  Read the article

• EXCEL workbook, intermitently, takes 30 seconds to load

  - by Julio Nobre

  I am trying to figure out why a simple .XLS EXCEL workbook is taking, randomly, 30 seconds to open. Before answering: Please, bear mind the following: Problem symptoms Hanging is intermitent and it takes exactly 30 seconds; During hanging there is no cpu or disk activity; It only happens during workbook load. Every runs smooth after that; Windows Explorer.exe hangs on folder, but all other folders, system and applications are still responsive; There are no consecutive hangings. I have to wait for while to reproduce this behaviour; All workbooks where located on a local drive (C:\BPI); The workbook has no macros and no addins; Office 2003 is being used for several years; The computer is running Windows XP; Computer has several network mapped drives, all addressed to main file server; Recently, main fileserver was replaced by Windows 2011 SBS Standard Edition What I have done so far I have traced machine Explorer.exe, using Process Monitor, added Duration column, and filtered by Duration 1. That's is how I found that hanging was taking exactly 30 seconds. For further information, please refer to Oliver Salzburg tutorial. Using Process Monitor, I have also figured out than five operations were taking most of sample collecting duration. Looking at sample image below, column Operation below you will notice that one single operation was taking 29 seconds; I have tried different workbooks (all of them smaller than 30 KB); I have, temporarily, removed all shortcuts on User Document's folder that were pointing to network drives or shares; I have runned CCleaner to fix registry issues; I made sure that there were no external links on tested workbooks; I have reproduced this behaviour for hours; I have extensivelly researched for hours on the web; Process Monitor's collected and filtered data

  Read the article

• Postfix SMTP-relay server against Gmail on CentOS 6.4

  - by Alex

  I'm currently trying to setup an SMTP-relay server to Gmail with Postfix on a CentOS 6.4 machine, so I can send e-mails from my PHP scripts. I followed this tutorial but I get this error output when trying to do a sendmail [email protected] Output: tail -f /var/log/maillog Apr 16 01:25:54 ext-server-dev01 postfix/cleanup[3646]: 86C2D3C05B0: message-id=<[email protected]> Apr 16 01:25:54 ext-server-dev01 postfix/qmgr[3643]: 86C2D3C05B0: from=<[email protected]>, size=297, nrcpt=1 (queue active) Apr 16 01:25:56 ext-server-dev01 postfix/smtp[3648]: 86C2D3C05B0: to=<[email protected]>, relay=smtp.gmail.com[173.194.79.108]:587, delay=4.8, delays=3.1/0.04/1.5/0.23, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.79.108] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 qh4sm3305629pac.8 - gsmtp (in reply to MAIL FROM command)) Here is my main.cf configuration, I tried a number of different options but nothing seems to work: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost inet_protocols = ipv4 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost myhostname = host.local.domain myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relayhost = [smtp.gmail.com]:587 sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_sasl_type = cyrus smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt smtp_use_tls = yes smtpd_sasl_path = smtpd unknown_local_recipient_reject_code = 550 In the /etc/postfix/sasl_passwd files (sasl_passwd & sasl_passwd.db) I got the following (removed the real password, and replaced it with "password"): [smtp.google.com]:587 [email protected]:password To create the sasl_passwd.db file, I did that by running this command: postmap hash:/etc/postfix/sasl_passwd Do anybody got an idea why I can't seem to send an e-mail from the server? Kind Regards Alex

  Read the article

• Set up multiple websites on a local web server

  - by mickburkejnr

  I have spent the last few days setting up a CentOS 6 server on my local network so that I can host multiple projects that I'm currently working on. Everything has been set up so that I access the server by typing 192.168.1.10 and the Apache test page comes up. What I'm aiming to do is to access different projects by typing in 192.168.1.10/project, and then view the project as if it was on it's own standalone server. I have thought about just sticking these sites inside folders on the server then accessing them that way, but a lot of my projects use CakePHP so this isn't feasible. So what I need to do is create VirtualHosts in Apache to allow me to do this, but without using a domain name. I want to stick to using the IP address of the machine (which is static). Any ideas? EDIT I've followed Peter's suggestion, but now I have a new problem. In the httpd.conf file I have entered the following information: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/html/project1 ServerName local.project1.com ErrorLog logs/local.project1.com-error_log CustomLog logs/local.project1.com-access_log common </VirtualHost> And now Apache is saying: Starting httpd: Warning: DocumentRoot [/www/html/project1] does not exist When it clearly does exist. I've disabled SELinux and I can confirm this isn't turned on. I've also checked the ownership of the folder, and its owned by root. I can also save files to these folders using a guest FTP account (which isn't associated to root), so the folders are being listed and can be written to. But when I try the folder in a web browser it doesn't seem to work either. I've also done a reboot of the server and the problem persists. What should I change in order to resolve this?

  Read the article

• Unable to access newly created web site in IIS 7.5

  - by Animesh

  Configuration: 32-bit Windows 7 development machine with IIS 7.5 I created a new web site in IIS to host only MVC sites called MVCHOST. The physical path to this website is set as C:\inetpub\mvcroot. I created a new v4.0 pool called mvcpool for this purpose. I have given Modify rights to IIS_WPG, IIS_IUSRS, ASPNET accounts. I created this web site with a host header "mvchost" and port 80, in the hopes of browsing MVC sites in the following way: mvchost/mvcapp1 mvchost/mvcapp2 instead of localhost/mvcapp1 localhost/mvcapp2 The only binding I set is the default one: http:*:80:mvchost. I have also copied the files iisstart.htm, web.config, welcome.png and folder aspnet_client from wwwroot over to mvcroot. Now when I try to the browse this site from IIS manager, I get the following error: This webpage is not available If I leave out the host header and give some port, say 99, I can access this website at localhost:99. What am I missing here? Why am I unable to access the web site at: http://mvchost/?

  Read the article

< Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >