Search Results

Search found 17634 results on 706 pages for 'django multi db'.

Page 666/706 | < Previous Page | 662 663 664 665 666 667 668 669 670 671 672 673  | Next Page >

• Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

  - by user647124

  Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

  Read the article

• ASP.NET MVC3 checkbox dropdownlist create [migrated]

  - by user95381

  i'm new in asp.net MVC and I/m use view model to poppulate the dropdown list and group of checkboxes. I use SQL Server 2012, where have many to many relationships between Students - Books; Student - Cities. I need collect StudentName, one city and many books for one student. I have next questions: 1. How can I get the values from database to my StudentBookCityViewModel? 2. How can I save the values to my database in [HttpPost] Create method? Here is the code: MODEL public class Student { public int StudentId { get; set; } public string StudentName { get; set; } public ICollection<Book> Books { get; set; } public ICollection<City> Cities { get; set; } } public class Book { public int BookId { get; set; } public string BookName { get; set; } public bool IsSelected { get; set; } public ICollection<Student> Students { get; set; } } public class City { public int CityId { get; set; } public string CityName { get; set; } public bool IsSelected { get; set; } public ICollection<Student> Students { get; set; } } VIEW MODEL public class StudentBookCityViewModel { public string StudentName { get; set; } public IList<Book> Books { get; set; } public StudentBookCityViewModel() { Books = new[] { new Book {BookName = "Title1", IsSelected = false}, new Book {BookName = "Title2", IsSelected = false}, new Book {BookName = "Title3", IsSelected = false} }.ToList(); } public string City { get; set; } public IEnumerable<SelectListItem> CityValues { get { return new[] { new SelectListItem {Value = "Value1", Text = "Text1"}, new SelectListItem {Value = "Value2", Text = "Text2"}, new SelectListItem {Value = "Value3", Text = "Text3"} }; } } } Context public class EFDbContext : DbContext{ public EFDbContext(string connectionString) { Database.Connection.ConnectionString = connectionString; } public DbSet<Book> Books { get; set; } public DbSet<Student> Students { get; set; } public DbSet<City> Cities { get; set; } protected override void OnModelCreating(DbModelBuilder modelBuilder) { modelBuilder.Entity<Book>() .HasMany(x => x.Students).WithMany(x => x.Books) .Map(x => x.MapLeftKey("BookId").MapRightKey("StudentId").ToTable("StudentBooks")); modelBuilder.Entity<City>() .HasMany(x => x.Students).WithMany(x => x.Cities) .Map(x => x.MapLeftKey("CityId").MapRightKey("StudentId").ToTable("StudentCities")); } } Controller public ActionResult Create() { return View(); } [HttpPost] public ActionResult Create() { //I don't understand how I can save values to db context.SaveChanges(); return RedirectToAction("Index"); } View @model UsingEFNew.ViewModels.StudentBookCityViewModel @using (Html.BeginForm()) { Your Name: @Html.TextBoxFor(model = model.StudentName) <div>Genre:</div> <div> @Html.DropDownListFor(model => model.City, Model.CityValues) </div> <div>Books:</div> <div> @for (int i = 0; i < Model.Books.Count; i++) { <div> @Html.HiddenFor(x => x.Books[i].BookId) @Html.CheckBoxFor(x => x.Books[i].IsSelected) @Html.LabelFor(x => x.Books[i].IsSelected, Model.Books[i].BookName) </div> } </div> <div> <input id="btnSubmit" type="submit" value="Submit" /> </div> </div> }

  Read the article

• Simple Preferred time control using silverlight 3.

  - by mohanbrij

  Here I am going to show you a simple preferred time control, where you can select the day of the week and the time of the day. This can be used in lots of place where you may need to display the users preferred times. Sample screenshot is attached below. This control is developed using Silverlight 3 and VS2008, I am also attaching the source code with this post. This is a very basic example. You can download and customize if further for your requirement if you want. I am trying to explain in few words how this control works and what are the different ways in which you can customize it further. File: PreferredTimeControl.xaml, in this file I have just hardcoded the controls and their positions which you can see in the screenshot above. In this example, to change the start day of the week and time, you will have to go and change the design in XAML file, its not controlled by your properties or implementation classes. You can also customize it to change the start day of the week, Language, Display format, styles, etc, etc. File: PreferredTimeControl.xaml.cs, In this control using the code below, first I am taking all the checkbox from my form and store it in the Global Variable, which I can use across my page. List<CheckBox> checkBoxList; #region Constructor public PreferredTimeControl() { InitializeComponent(); GetCheckboxes();//Keep all the checkbox in List in the Load itself } #endregion #region Helper Methods private List<CheckBox> GetCheckboxes() { //Get all the CheckBoxes in the Form checkBoxList = new List<CheckBox>(); foreach (UIElement element in LayoutRoot.Children) { if (element.GetType().ToString() == "System.Windows.Controls.CheckBox") { checkBoxList.Add(element as CheckBox); } } return checkBoxList; } Then I am exposing the two methods which you can use in the container form to get and set the values in this controls. /// <summary> /// Set the Availability on the Form, with the Provided Timings /// </summary> /// <param name="selectedTimings">Provided timings comes from the DB in the form 11,12,13....37 /// Where 11 refers to Monday Morning, 12 Tuesday Morning, etc /// Here 1, 2, 3 is for Morning, Afternoon and Evening respectively, and for weekdays /// 1,2,3,4,5,6,7 where 1 is for Monday, Tuesday, Wednesday, Thrusday, Friday, Saturday and Sunday respectively /// So if we want Monday Morning, we can can denote it as 11, similarly for Saturday Evening we can write 36, etc /// </param> public void SetAvailibility(string selectedTimings) { foreach (CheckBox chk in checkBoxList) { chk.IsChecked = false; } if (!String.IsNullOrEmpty(selectedTimings)) { string[] selectedString = selectedTimings.Split(','); foreach (string selected in selectedString) { foreach (CheckBox chk in checkBoxList) { if (chk.Tag.ToString() == selected) { chk.IsChecked = true; } } } } } /// <summary> /// Gets the Availibility from the selected checkboxes /// </summary> /// <returns>String in the format of 11,12,13...41,42...31,32...37</returns> public string GetAvailibility() { string selectedText = string.Empty; foreach (CheckBox chk in GetCheckboxes()) { if (chk.IsChecked == true) { selectedText = chk.Tag.ToString() + "," + selectedText; } } return selectedText; }   In my example I am using the matrix format for Day and Time, for example Monday=1, Tuesday=2, Wednesday=3, Thursday = 4, Friday = 5, Saturday = 6, Sunday=7. And Morning = 1, Afternoon =2, Evening = 3. So if I want to represent Morning-Monday I will have to represent it as 11, Afternoon-Tuesday as 22, Morning-Wednesday as 13, etc. And in the other way to set the values in the control I am passing the values in the control in the same format as preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); So this will set the checkbox value for Morning-Monday, Morning-Tuesday, Morning-Wednesday, Morning-Saturday, Afternoon of Tuesday and Afternoon of Wednesday. To implement this control, first I have to import this control in xmlns namespace as xmlns:controls="clr-namespace:PreferredTimeControlApp" and finally put in your page wherever you want, <Grid x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}"> <Border x:Name="ContentBorder" Style="{StaticResource ContentBorderStyle}"> <controls:PreferredTimeControl x:Name="preferredTimeControl"></controls:PreferredTimeControl> </Border> </Grid> And in the code behind you can just include this code: private void InitializeControl() { preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); } And you are ready to go. For more details you can refer to my code attached. I know there can be even simpler and better way to do this. Let me know if any other ideas. Sorry, Guys Still I have used Silverlight 3 and VS2008, as from the system I am uploading this is still not upgraded, but still you can use the same code with Silverlight 4 and VS2010 without any changes. May be just it will ask you to upgrade your project which will take care of rest. Download Source Code.   Thanks ~Brij

  Read the article

• CodePlex Daily Summary for Sunday, May 23, 2010

  CodePlex Daily Summary for Sunday, May 23, 2010New ProjectsA2Command: Apple 2 port of CBM-Command (http://cbmcommand.codeplex.com)AgUnit: AgUnit is a plugin for Jetbrains ReSharper (R#) that allows you to run and debug Silverlight unit tests from within Visual Studio.BSonPosh Powershell Module: A collection of useful Powershell functions I have written and collected over the years. It is a Powershell v2 Module composed of mostly scripts.DB Restriker: Simple tool for lookup, parsing, searching some standard databases using wildcards and pattern recognition.Entity Framework Repository & Unit of Work Template: T4 Template for Entity Framework 4 for creating a data access layer using the repository and unit of work patterns. Designed to work well with dep...Fiction Catalog: A catalog project designed to store information about fictional literature.Giving a Presentation: Useful for people doing presentations, this application hides desktop icons, disables screensaver, closes chosen programs when presentation starts,...glueless: Glueless is a local message bus which allows architect to design highly decoupled systems and applications. Glueless is a step beyond dependency i...HtmlCodeIt: Take any code and format it so that it can be viewed properly on a web browser, blog post or website.just testproject :): just have a test!KanbanTaskboard: The aim of the project is to design and implement a functional prototype for visualizing and operating a multi-platform virtual "Kanban Taskboard”Life System: Life SystemOaSys Project: Project Oasys is a project that aims to help solve desertification. Scoring of pingPong Game: Scoring of pingPong GameSilverlight Web Comic: The Silverlight Web Comic makes easier for the people create your own comic with your own pictures o drawings, and add the globes of text like the ...TickSharp: C# Wrapper for http://TickSpot.com RESTful API.Traductor: El Traductor es una aplicación de escritorio para traducción de frases entre distintos idiomas basada en la plataforma Silverlight Out Of Browser y...WatchersNET.SkinObjects.ModulActionsMenu: Displays the Module Actions Menu as a Unsorted CSS Menu.xxfd1r4w96: testingNew ReleasesAgUnit: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1.zip into the "Bin\Plugins\" folder of your ReSharper installation (default C:...ASP.NET MVC | SCAFFOLD: ASP.NET MVC SCAFFOLD - Beta 1.0: Release versão betaBizTalk Server 2006 Documenter: Documenter_v3.4.0.0: This is the new release of the documenter which has the following highlights Support for 64 bit systems Support for SxS scenarios (so now the sys...CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 Beta 2- VS 2008 Replacement: The CassiniDev Visual Studio build is a fully compatibly Visual Studio 2008/2010 Development server drop-in replacement with all CassiniDev enhance...CBM-Command: 2010-05-22 Beta: Release Notes - 2010-05-22 BetaNew Features Simple text file viewer. Now when you use SHIFT-RETURN to open a file, it will ask if you want to view...Easy Validation: Documentation: Documentation for easyVal was created and presented at University of Texas at Austin in May of 2010.Entity Framework Repository & Unit of Work Template: 1.0: Initial ReleaseFrotz.NET: FrotzNet 1.0 beta: Many, many changes, including: - Got Adaptive Palette working for graphics - Got undo working - Implemented all zcodes - Added scripting as well as...Giving a Presentation: CTP: This release includes basic extensibility infrastructure and three extensions: hides desktop icons, disables screensaver, closes chosen programs wh...Gov 2.0 Kit: SharePoint 2010 MyPeeps Mysite Accelerators: SharePoint 2010 MyPeeps Mysite Accelerators. Attached are the installation and documentations files.HKGolden Express: HKGoldenExpress (Build 201005221900): New features: (None) Bug fix: Hong Kong special characters now can be posted without encoding problem. Improvements: (None) Other changes: (None) K...Intellibox - A WPF auto complete textbox search control: Beta 2: Updated the namespace of the Intellibox control from "System.Windows.Controls" to "FeserWard.Controls". Empty binding Path properties now work on...MDownloader: MDownloader-0.15.14.59111: Fixed DepositFile provider. Fixed FileFactory provider. Added simple fakeness detector (can check if .rar, .zip, .7z files have valid signature...Mute4: V1: Initial version of Mute4NLog - Advanced .NET Logging: Nightly Build 2010.05.22.003: Changes since the last build:No changes. Unit test results:Passed 191/191 (100%) Passed 191/191 (100%) Passed 214/214 (100%) Passed 216/216 (100%)...NSIS Autorun: NSIS Autorun 0.1.9: This release includes source code, executable binaries and example materials.Silverlight Gantt Chart: Silverlight Gantt Chart 1.3 (SL4): The latest release mainly makes the Gantt Chart useful in Silverlight 4 applications.SqlServerExtensions: V 0.2 beta: V 0.2 Beta release: New features available TrimStart - trim leading characters TrimEnd - trim trailing characters Remove - remove characters f...Traductor: Version 3.1: Nuevo en esta versión: El Traductor ahora permite escoger entre los motores de Microsoft y Google. El Text to Speech is es ahora habilitado por...VCC: Latest build, v2.1.30522.0: Automatic drop of latest buildVDialer Add-In for Outlook 2007 & 2010 - Dial your Vonage phone from Outlook: VDialer Add-In 1.0.3: This release adds new features related to Journal and use of Vonage API Changes in version 1.0.3 Added configurable option to automatically open J...WatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.00: First Release For Informations How To Install, the Skin Object Read the DocumentationMost Popular ProjectsCodeComment.NETRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryCaliburn: An Application Framework for WPF and Silverlightpatterns & practices: Windows Azure Security GuidanceCassiniDev - Cassini 3.5/4.0 Developers EditionGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSQL Server PowerShell ExtensionsBlogEngine.NETCodeReview

  Read the article

• CodePlex Daily Summary for Monday, May 17, 2010

  CodePlex Daily Summary for Monday, May 17, 2010New Projects.NET Essentials Course: .NET Essentials course @ Telerik Academy Training project for the studentsAU/NZ Office 2010 Launch Demos: The AU/NZ Office 2010 Launch Demos are a collection of code samples that were used as part of the Office/SharePoint 2010 launch parties in Australi...CybennyCMS: Very simple CMS system for building sites with ASP.NET with templates for lay-out, content pages with only html content and a xml file for the site...essionPIM: essionPIMGIStance: A library for finding "nearest neighbor" among an in-memory set of positions, in C# and F#. A radius must be specified for making a meaningful s...IP Informer: IP Informer is IP Informer.Kurumsal Ofis Paketi: Kurumsal Ofis Paketi (KOP), Microsoft Ofis 2010 ürünleri için geliştirilmiş eklenti yazılımıdır. KOP, Word ve Excel’de bulunan işlevlerinin genişle...Mockup to XAML: Convert Balsamiq Mockups to XAML. This project supports BMML mockup control conversion using plugins. A standard set of controls are included wit...Open XML Validator: This WPF app give you a brief resume about errors in your Open XML documents.Paint.NET Bulk Image Processor: PDNBulkUpdater is a plug-in for Paint.NET that allows you to efficiently perform operations such as resizing and converting multiple images at the ...PiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统Roleplay character generator: The roleplay character generator allows the creation of characters for different roleplaying gamesSharePoint User Search WebParts: This project contains SharePoint webparts which provide advanced search configuration and experience for SharePoint 2007. It will be upgrade in few...Spodi: Spodi is created on 22-04-2010TfsPolicyPack: This project will provide a few checkin policies for VS 2010.vccodesandobx: vccodesandobxvccodesandobxvccodesandobxWhiteNile: test project using codeplexNew ReleasesAnimeStore.Net: 1.0.3.0: Build 1.0.3.0 Changes Move some functionality to features (MEF) Filter / Search functionality. Anime hard-copy records storage (e.g Disk Storage ...AU/NZ Office 2010 Launch Demos: Twitter map web part: This is the main twitter map web part download, see the Twitter Map web part page for all the information.Blueset Studio Opensource Projects: 推来: 稳定版本BUtil: BUtil 5.0 Alpha2: The initial implementation of multitasking (except ghost)CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta: Beta 2 is released here: url http://cassinidev.codeplex.com/releases/view/45456 New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. ...CBM-Command: 2010-05-16: Release Notes - 2010-05-16New Features New navigation options: Page Up, Page Down, Top of Directory, Bottom of Directory. See documentation (http:...CCNet Conditional Plugin: CCNet Conditional for CCNet 1.5: A (quick) build of the plugin for CCNet 1.5 to fix the 17365 bug reported by Beakster. This also adds a new condition "timeCondition"CybennyCMS: Cybenny CMS beta 1: The first beta. Includes a small demo site.Data Extracting SDK: Data Extracting SDK v.1.1 RTM: RTM version of Data Extracting SDK.Duckworth Lewis Professional Edition Calculator: DLcalc 2.0: This software can perform all D/L calculations 100% accurately. From version 2.0 onwards, tables for par scores can also be produced.EPiServer CMS Page Type Builder: Page Type Builder 1.2: Release notes can be found in this blog post.Floe IRC Client: Floe IRC Client 2010-05 R5: - Many new context menu options for @s - Ability to select multiple users in the nick list for some operations (kick, ban) - Bunch of minor bug fix...Graffiti CMS Events Plugin: Version 1.0.1: Minor update to previous version to fix bug where deleted posts were still showing in the calendar.Microsoft Research Boogie: 2010-05-16: Binary release of Boogie and Dafny. (Note, Chalice is not pre-built as part of this binary release. To obtain it, you need to build it yourself f...MSBuild Launch Pad (mPad): 1.0 Beta 2: Basic support for sln, csproj, vbproj, vcxproj, shfbproj, ccproj, oxygene and proj files are added. Basic settings (Show Prompt, and Auto Hide) are...Multi-Language Words Memorizer: Memorizer 1.1: Issues fix, XML db update with new words.NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.1: New release of NShader! New : - a Visual Studio 2010 port can be installed through the new extension manager : you just have to download NShaderV...PHPExcel: PHPExcel 1.7.3 Production: Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also add your name / company on our Donati...Rollback - A social backup tool.: Rollback Setup 0.5.1.2 Build 48360: Bug fixes for backing up files which are hidden/system. Changes to make builds on 64 bit Windows 7 using VS 2010 Express edition.Rollback - A social backup tool.: Rollback Setup 0.5.1.3: Updated version number.Shake - C# Make: Shake v0.1.20: New: Simple console logger Changes: Command line params helper writes out syntax and samples (like msbuild) Fixes: Assembly info, file task and r...SharePoint User Search WebParts: v0.1 Friendly MOSS 2007 Search WebPart: Very first version of this webpart. A more stabilized version will follow in few days.Team Deploy: Team Deploy 2010 Beta 1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comp...Team Foundation Server Administration Tool: 2.0: TFS Administration Tool 2.0 TFS Administration Tool 2.0 is built on top of the Team Foundation Server 2008 object model and in order to connect to...The Ping Master: v0.9.0.0: Installer for The Ping Master binariesUseful Office Macros: All Macro Downloads: Please find above the downloads related to this project. Each Excel Workbook below works independently of the others, so you only need to download...VCC: Latest build, v2.1.30516.0: Automatic drop of latest buildVisual Studio DSite: Advanced Digital Board Game (Visual C++ 2008): An advanced digital board game made in visual c 2008.YUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool Full Version: Version 1.0 The following changes have been made: Merged classes to automatically sense if the target file is Javascript or CSS. Cleaned up setu...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelBlogEngine.NETRawrMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersDotNetZip LibraryCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell Extensions

  Read the article

• 14+ WordPress Portfolio Themes

  - by Edward

  There are various portfolio themes for WordPress out there, with this collection we are trying to help you choose the best one. These themes can be used to create any type of personal, photography, art or corporate portfolio. Display 3 in 1 Display 3 in 1 – Business & Portfolio WordPress Theme. Features a fantastic 3D Image slideshow that can be controlled from your backend with a custom tool. The Theme has a huge wordpress custom backend (8 additional Admin Pages) that make customization of the Theme easy for those who dont know much about coding or wordpress. Price: $40 View Demo Download DeepFocus Tempting features such as automatic separation of blog and portfolio content by template, publishing of most important information on homepage, styles to choose from and many more such features. It also provides for page templates for blog, portfolio, blog archive, tags etc. It has the best feature that helps you to manage everything from one place. Price: $39 (Package includes more than 55 themes) View Demo Download SimplePress Simple, yet awesome. One of the best portfolio theme. Price: $39 (Package includes more than 55 themes) View Demo Download Graphix Graphix is one of best word press portfolio themes. It is most suited to aspiring designers, developers, artists and photographers who’d like a framework theme, which has a great-looking portfolio with a feature-rich blog. It has theme option page, 5-color style, SEO option, featured content blocks, drop down multi-level menu, social profile link custom widgets, custom post, custom page template etc. Price: $69 Single & $149 Developer Package View Demo Download Bizznizz It boasts of many features such as custom homepage, custom post types, custom widgets, portfolio templates, alternative styles and many more. View Demo Download Showtime Ultimate WordPress Theme for you to create your web portfolio, It has 3 different styles for you to choose from. Price: $40 View Demo Download Montana WP Horizontal Portfolio Theme Montana Theme – WP Horizontal Portfolio Theme, best suited for creative studios to showcase design, photography, illustration, paintings and art. Price: $30 View Demo Download OverALL OverALL Premium WordPress Blog & Portfolio Theme, is low priced & has amazing tons of features. Price: $17 View Demo Download Habitat Habitat – Blog and Portfolio Theme. Unique Portfolio Sorting/Filtering with a custom jQuery script (each entry supports multiple images or a video) Multiple Featured Images for each post to generate individual Slideshows per Post, or the option to directly embed video content from youtube, vimeo, hulu etc. Price: $35 View Demo Download Fresh Folio Fresh Folio from WooThemes, can be used as both portfolio and a premium WordPress theme. The theme is a remix of the Fresh News Theme and Proud Folio Theme which combines all the best elements of the respective blog and portfolio style themes. View Demo Download Fresh Folio Features: Can be used to create an impressive portfolio. 7 diverse theme styles to choose from (default, blue, red, grunge light, grunge floral, antique, blue creamer, nightlife) The template will automatically (visually) separate your blog & portfolio content, making this an amazing theme for aspiring designers, developers, artists, photographers etc. Unique page templates types for the portfolio, blog, blog archives, tags & search results. Integrated Theme Options (for WordPress) to tweak the layout, colour scheme etc. for the theme Optional Automatic Image Resize, which is used to dynamically create the thumbnails and featured images Includes Widget enabled Sidebars. eGallery eGallery is a theme made to transform your wordpress blog into a fully functional online portfolio. Theme is perfectly designed to emphasize the artwork you choose to showcase. The design has been greatly enhanced using javascript, and is easy to implement. Price: $39 (Package includes more than 55 themes) View Demo Download ProudFolio ProudFolio is a portfolio premium WordPress theme from Woo Themes. The theme is for designers, developers, artists and photographers who would like a showcase theme which would depict as a portfolio and also serves a purpose of blog. ProudFolio puts a strong emphasis on the portfolio pieces, allowing for decent-sized thumbnails, huge fullscreen views via Lightbox, and full details on the single page. The theme file also contains a choice of three different background images and color schemes. Price: $70 Single $150 Developer License View Demo Download Features: The template will automatically (visually) separate your blog & portfolio content. An unique homepage layout, which publishes only the most important information; Unique page templates for the portfolio, blog, blog archives, tags & search results. Integrated Theme Options (for WordPress) to tweak the layout, colour scheme etc. for the theme; Built-in video panel, which you can use to publish any web-based Flash videos; Automatic Image Resize, which is used to dynamically create the thumbnails and featured images; Custom Page Templates for Archives, Sitemap & Image Gallery; Built-in Gravatar Support for Authors & Comments; Integrated Banner Management script to display randomized banner ads of your choice site-wide; Pretty drop down navigation everywhere; and Widget Enabled Sidebars. Porftolio WordPress Theme A FREE wordpress theme designed for web portfolios and (for now) just for web portfolios. It is coming with an Administrative Panel from where you can edit the head quote text, you can edit all theme colors, font families, font sizes and you can fill a curriculum vitae and display it into a special page. Theme demo and download can be found here Viz | Biz Viz | Biz is a premium WordPress photo gallery and portfolio theme designed specifically for photographers, graphic designers and web designers who want to display their creative work online, market their services, as well as have a typical text blog, using the power and flexibility of WordPress. It is priced for $79.95. Theme Features: Premium quality portfolio template Custom logo uploader to replace the standard graphic with your own unique look from the WP Dashboard Integrated blog component (front images are custom fields and thumbnails, but you can also have a typical blog) Four tabbed feature areas (About Me, Services, Recent Posts, and Tags) Two home page feature photos (You choose which photos to feature using a WP category) Manage your online portfolio through the WordPress CMS Crop two sizes of your work: One for the front page thumbnails and another full size version and upload to WP Search engine optimized. Related posts:14 WordPress Photo Blog & Portfolio Themes 6 PhotoBlog Portfolio WordPress Themes Professional WordPress Business Themes

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• Man pages not finding entry

  - by Mike

  So, I'm not sure what is going on with my system (ubuntu 12.04), but my man pages do not seem to be working. I try man gcc and get the following response No manual entry for gcc See 'man 7 undocumented' for help when manual pages are not available. However I see the man entry in /usr/share/man/man1/gcc.1.gz Here is what my /etc/manpath.config file looks like # manpath.config # # This file is used by the man-db package to configure the man and cat paths. # It is also used to provide a manpath for those without one by examining # their PATH environment variable. For details see the manpath(5) man page. # # Lines beginning with `#' are comments and are ignored. Any combination of # tabs or spaces may be used as `whitespace' separators. # # There are three mappings allowed in this file: # -------------------------------------------------------- # MANDATORY_MANPATH manpath_element # MANPATH_MAP path_element manpath_element # MANDB_MAP global_manpath [relative_catpath] #--------------------------------------------------------- # every automatically generated MANPATH includes these fields # #MANDATORY_MANPATH /usr/src/pvm3/man # MANDATORY_MANPATH /usr/man MANDATORY_MANPATH /usr/share/man MANDATORY_MANPATH /usr/local/share/man #--------------------------------------------------------- # set up PATH to MANPATH mapping # ie. what man tree holds man pages for what binary directory. # # *PATH* -> *MANPATH* # MANPATH_MAP /bin /usr/share/man MANPATH_MAP /usr/bin /usr/share/man MANPATH_MAP /sbin /usr/share/man MANPATH_MAP /usr/sbin /usr/share/man MANPATH_MAP /usr/local/bin /usr/local/man MANPATH_MAP /usr/local/bin /usr/local/share/man MANPATH_MAP /usr/local/sbin /usr/local/man MANPATH_MAP /usr/local/sbin /usr/local/share/man MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man MANPATH_MAP /usr/bin/X11 /usr/X11R6/man MANPATH_MAP /usr/games /usr/share/man MANPATH_MAP /opt/bin /opt/man MANPATH_MAP /opt/sbin /opt/man #--------------------------------------------------------- # For a manpath element to be treated as a system manpath (as most of those # above should normally be), it must be mentioned below. Each line may have # an optional extra string indicating the catpath associated with the # manpath. If no catpath string is used, the catpath will default to the # given manpath. # # You *must* provide all system manpaths, including manpaths for alternate # operating systems, locale specific manpaths, and combinations of both, if # they exist, otherwise the permissions of the user running man/mandb will # be used to manipulate the manual pages. Also, mandb will not initialise # the database cache for any manpaths not mentioned below unless explicitly # requested to do so. # # In a per-user configuration file, this directive only controls the # location of catpaths and the creation of database caches; it has no effect # on privileges. # # Any manpaths that are subdirectories of other manpaths must be mentioned # *before* the containing manpath. E.g. /usr/man/preformat must be listed # before /usr/man. # # *MANPATH* -> *CATPATH* # MANDB_MAP /usr/man /var/cache/man/fsstnd MANDB_MAP /usr/share/man /var/cache/man MANDB_MAP /usr/local/man /var/cache/man/oldlocal MANDB_MAP /usr/local/share/man /var/cache/man/local MANDB_MAP /usr/X11R6/man /var/cache/man/X11R6 MANDB_MAP /opt/man /var/cache/man/opt # #--------------------------------------------------------- # Program definitions. These are commented out by default as the value # of the definition is already the default. To change: uncomment a # definition and modify it. # #DEFINE pager pager -s #DEFINE cat cat #DEFINE tr tr '\255\267\264\327' '\055\157\047\170' #DEFINE grep grep #DEFINE troff groff -mandoc #DEFINE nroff nroff -mandoc #DEFINE eqn eqn #DEFINE neqn neqn #DEFINE tbl tbl #DEFINE col col #DEFINE vgrind vgrind #DEFINE refer refer #DEFINE grap grap #DEFINE pic pic -S # #DEFINE compressor gzip -c7 #--------------------------------------------------------- # Misc definitions: same as program definitions above. # #DEFINE whatis_grep_flags -i #DEFINE apropos_grep_flags -iEw #DEFINE apropos_regex_grep_flags -iE #--------------------------------------------------------- # Section names. Manual sections will be searched in the order listed here; # the default is 1, n, l, 8, 3, 0, 2, 5, 4, 9, 6, 7. Multiple SECTION # directives may be given for clarity, and will be concatenated together in # the expected way. # If a particular extension is not in this list (say, 1mh), it will be # displayed with the rest of the section it belongs to. The effect of this # is that you only need to explicitly list extensions if you want to force a # particular order. Sections with extensions should usually be adjacent to # their main section (e.g. "1 1mh 8 ..."). # SECTION 1 n l 8 3 2 3posix 3pm 3perl 5 4 9 6 7 # #--------------------------------------------------------- # Range of terminal widths permitted when displaying cat pages. If the # terminal falls outside this range, cat pages will not be created (if # missing) or displayed. # #MINCATWIDTH 80 #MAXCATWIDTH 80 # # If CATWIDTH is set to a non-zero number, cat pages will always be # formatted for a terminal of the given width, regardless of the width of # the terminal actually being used. This should generally be within the # range set by MINCATWIDTH and MAXCATWIDTH. # #CATWIDTH 0 # #--------------------------------------------------------- # Flags. # NOCACHE keeps man from creating cat pages. #NOCACHE Thanks for any help (p.s. even 'man man' fails) Edit: When I run ls -l /usr/share/man/man1/gcc* I get the following output lrwxrwxrwx 1 root root 12 May 27 15:41 /usr/share/man/man1/gcc.1.gz -> gcc-4.6.1.gz -rw-r--r-- 1 root root 217776 Apr 15 17:34 /usr/share/man/man1/gcc-4.6.1.gz

  Read the article

• CodePlex Daily Summary for Sunday, June 01, 2014

  CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

  Read the article

• Clustering for Mere Mortals (Pt 3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  Start with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Oracle's Global Single Schema

  - by david.butler(at)oracle.com

  Maximizing business process efficiencies in a heterogeneous environment is very difficult. The difficulty stems from the fact that the various applications across the Information Technology (IT) landscape employ different integration standards, different message passing strategies, and different workflow engines. Vendors such as Oracle and others are delivering tools to help IT organizations manage the complexities introduced by these differences. But the one remaining intractable problem impacting efficient operations is the fact that these applications have different definitions for the same business data. Business data is your business information codified for computer programs to use. A good data model will represent the way your organization does business. The computer applications your organization deploys to improve operational efficiency are built to operate on the business data organized into this schema.  If the schema does not represent how you do business, the applications on that schema cannot provide the features you need to achieve the desired efficiencies. Business processes span these applications. Data problems break these processes rendering them far less efficient than they need to be to achieve organization goals. Thus, the expected return on the investment in these applications is never realized. The success of all business processes depends on the availability of accurate master data.  Clearly, the solution to this problem is to consolidate all the master data an organization uses to run its business. Then clean it up, augment it, govern it, and connect it back to the applications that need it. Until now, this obvious solution has been difficult to achieve because no one had defined a data model sufficiently broad, deep and flexible enough to support transaction processing on all key business entities and serve as a master superset to all other operational data models deployed in heterogeneous IT environments. Today, the situation has changed. Oracle has created an operational data model (aka schema) that can support accurate and consistent master data across heterogeneous IT systems. This is foundational for providing a way to consolidate and integrate master data without having to replace investments in existing applications. This Global Single Schema (GSS) represents a revolutionary breakthrough that allows for true master data consolidation. Oracle has deep knowledge of applications dating back to the early 1990s.  It developed applications in the areas of Supply Chain Management (SCM), Product Lifecycle Management (PLM), Enterprise Resource Planning (ERP), Customer Relationship Management (CRM), Human Capital Management (HCM), Financials and Manufacturing. In addition, Oracle applications were delivered for key industries such as Communications, Financial Services, Retail, Public Sector, High Tech Manufacturing (HTM) and more. Expertise in all these areas drove requirements for GSS. The following figure illustrates Oracle's unique position that enabled the creation of the Global Single Schema. GSS Requirements Gathering GSS defines all the key business entities and attributes including Customers, Contacts, Suppliers, Accounts, Products, Services, Materials, Employees, Installed Base, Sites, Assets, and Inventory to name just a few. In addition, Oracle delivers GSS pre-integrated with a wide variety of operational applications.  Business Process Automation EBusiness is about maximizing operational efficiency. At the highest level, these 'operations' span all that you do as an organization.  The following figure illustrates some of these high-level business processes. Enterprise Business Processes Supplies are procured. Assets are maintained. Materials are stored. Inventory is accumulated. Products and Services are engineered, produced and sold. Customers are serviced. And across this entire spectrum, Employees do the procuring, supporting, engineering, producing, selling and servicing. Not shown, but not to be overlooked, are the accounting and the financial processes associated with all this procuring, manufacturing, and selling activity. Supporting all these applications is the master data. When this data is fragmented and inconsistent, the business processes fail and inefficiencies multiply. But imagine having all the data under these operational business processes in one place. ·            The same accurate and timely customer data will be provided to all your operational applications from the call center to the point of sale. ·            The same accurate and timely supplier data will be provided to all your operational applications from supply chain planning to procurement. ·            The same accurate and timely product information will be available to all your operational applications from demand chain planning to marketing. You would have a single version of the truth about your assets, financial information, customers, suppliers, employees, products and services to support your business automation processes as they flow across your business applications. All company and partner personnel will access the same exact data entity across all your channels and across all your lines of business. Oracle's Global Single Schema enables this vision of a single version of the truth across the heterogeneous operational applications supporting the entire enterprise. Global Single Schema Oracle's Global Single Schema organizes hundreds of thousands of attributes into 165 major schema objects supporting over 180 business application modules. It is designed for international operations, and extensibility.  The schema is delivered with a full set of public Application Programming Interfaces (APIs) and an Integration Repository with modern Service Oriented Architecture interfaces to make data available as a services (DaaS) to business processes and enable operations in heterogeneous IT environments. ·         Key tables can be extended with unlimited numbers of additional attributes and attribute groups for maximum flexibility.  o    This enables model extensions that reflect business entities unique to your organization's operations. ·         The schema is multi-organization enabled so data manipulation can be controlled along organizational boundaries. ·         It uses variable byte Unicode to support over 31 languages. ·         The schema encodes flexible date and flexible address formats for easy localizations. No matter how complex your business is, Oracle's Global Single Schema can hold your business objects and support your global operations. Oracle's Global Single Schema identifies and defines the business objects an enterprise needs within the context of its business operations. The interrelationships between the business objects are also contained within the GSS data model. Their presence expresses fundamental business rules for the interaction between business entities. The following figure illustrates some of these connections.   Interconnected Business Entities Interconnecte business processes require interconnected business data. No other MDM vendor has this capability. Everyone else has either one entity they can master or separate disconnected models for various business entities. Higher level integrations are made available, but that is a weak architectural alternative to data level integration in this critically important aspect of Master Data Management.    

  Read the article

• Curing the Database-Application mismatch

  - by Phil Factor

  If an application requires access to a database, then you have to be able to deploy it so as to be version-compatible with the database, in phase. If you can deploy both together, then the application and database must normally be deployed at the same version in which they, together, passed integration and functional testing.  When a single database supports more than one application, then the problem gets more interesting. I’ll need to be more precise here. It is actually the application-interface definition of the database that needs to be in a compatible ‘version’.  Most databases that get into production have no separate application-interface; in other words they are ‘close-coupled’.  For this vast majority, the whole database is the application-interface, and applications are free to wander through the bowels of the database scot-free.  If you’ve spurned the perceived wisdom of application architects to have a defined application-interface within the database that is based on views and stored procedures, any version-mismatch will be as sensitive as a kitten.  A team that creates an application that makes direct access to base tables in a database will have to put a lot of energy into keeping Database and Application in sync, to say nothing of having to tackle issues such as security and audit. It is not the obvious route to development nirvana. I’ve been in countless tense meetings with application developers who initially bridle instinctively at the apparent restrictions of being ‘banned’ from the base tables or routines of a database.  There is no good technical reason for needing that sort of access that I’ve ever come across.  Everything that the application wants can be delivered via a set of views and procedures, and with far less pain for all concerned: This is the application-interface.  If more than zero developers are creating a database-driven application, then the project will benefit from the loose-coupling that an application interface brings. What is important here is that the database development role is separated from the application development role, even if it is the same developer performing both roles. The idea of an application-interface with a database is as old as I can remember. The big corporate or government databases generally supported several applications, and there was little option. When a new application wanted access to an existing corporate database, the developers, and myself as technical architect, would have to meet with hatchet-faced DBAs and production staff to work out an interface. Sure, they would talk up the effort involved for budgetary reasons, but it was routine work, because it decoupled the database from its supporting applications. We’d be given our own stored procedures. One of them, I still remember, had ninety-two parameters. All database access was encapsulated in one application-module. If you have a stable defined application-interface with the database (Yes, one for each application usually) you need to keep the external definitions of the components of this interface in version control, linked with the application source,  and carefully track and negotiate any changes between database developers and application developers.  Essentially, the application development team owns the interface definition, and the onus is on the Database developers to implement it and maintain it, in conformance.  Internally, the database can then make all sorts of changes and refactoring, as long as source control is maintained.  If the application interface passes all the comprehensive integration and functional tests for the particular version they were designed for, nothing is broken. Your performance-testing can ‘hang’ on the same interface, since databases are judged on the performance of the application, not an ‘internal’ database process. The database developers have responsibility for maintaining the application-interface, but not its definition,  as they refactor the database. This is easily tested on a daily basis since the tests are normally automated. In this setting, the deployment can proceed if the more stable application-interface, rather than the continuously-changing database, passes all tests for the version of the application. Normally, if all goes well, a database with a well-designed application interface can evolve gracefully without changing the external appearance of the interface, and this is confirmed by integration tests that check the interface, and which hopefully don’t need to be altered at all often.  If the application is rapidly changing its ‘domain model’  in the light of an increased understanding of the application domain, then it can change the interface definitions and the database developers need only implement the interface rather than refactor the underlying database.  The test team will also have to redo the functional and integration tests which are, of course ‘written to’ the definition.  The Database developers will find it easier if these tests are done before their re-wiring  job to implement the new interface. If, at the other extreme, an application receives no further development work but survives unchanged, the database can continue to change and develop to keep pace with the requirements of the other applications it supports, and needs only to take care that the application interface is never broken. Testing is easy since your automated scripts to test the interface do not need to change. The database developers will, of course, maintain their own source control for the database, and will be likely to maintain versions for all major releases. However, this will not need to be shared with the applications that the database servers. On the other hand, the definition of the application interfaces should be within the application source. Changes in it have to be subject to change-control procedures, as they will require a chain of tests. Once you allow, instead of an application-interface, an intimate relationship between application and database, we are in the realms of impedance mismatch, over and above the obvious security problems.  Part of this impedance problem is a difference in development practices. Whereas the application has to be regularly built and integrated, this isn’t necessarily the case with the database.  An RDBMS is inherently multi-user and self-integrating. If the developers work together on the database, then a subsequent integration of the database on a staging server doesn’t often bring nasty surprises. A separate database-integration process is only needed if the database is deliberately built in a way that mimics the application development process, but which hampers the normal database-development techniques.  This process is like demanding a official walking with a red flag in front of a motor car.  In order to closely coordinate databases with applications, entire databases have to be ‘versioned’, so that an application version can be matched with a database version to produce a working build without errors.  There is no natural process to ‘version’ databases.  Each development project will have to define a system for maintaining the version level. A curious paradox occurs in development when there is no formal application-interface. When the strains and cracks happen, the extra meetings, bureaucracy, and activity required to maintain accurate deployments looks to IT management like work. They see activity, and it looks good. Work means progress.  Management then smile on the design choices made. In IT, good design work doesn’t necessarily look good, and vice versa.

  Read the article

• Clustering for Mere Mortals (Pt3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  IStart with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Oracle Flashback Technologies - Overview

  - by Sridhar_R-Oracle

  Oracle Flashback Technologies - IntroductionIn his May 29th 2014 blog, my colleague Joe Meeks introduced Oracle Maximum Availability Architecture (MAA) and discussed both planned and unplanned outages. Let’s take a closer look at unplanned outages. These can be caused by physical failures (e.g., server, storage, network, file deletion, physical corruption, site failures) or by logical failures – cases where all components and files are physically available, but data is incorrect or corrupt. These logical failures are usually caused by human errors or application logic errors. This blog series focuses on these logical errors – what causes them and how to address and recover from them using Oracle Database Flashback. In this introductory blog post, I’ll provide an overview of the Oracle Database Flashback technologies and will discuss the features in detail in future blog posts. Let’s get started. We are all human beings (unless a machine is reading this), and making mistakes is a part of what we do…often what we do best!  We “fat finger”, we spill drinks on keyboards, unplug the wrong cables, etc.  In addition, many of us, in our lives as DBAs or developers, must have observed, caused, or corrected one or more of the following unpleasant events: Accidentally updated a table with wrong values !! Performed a batch update that went wrong - due to logical errors in the code !! Dropped a table !! How do DBAs typically recover from these types of errors? First, data needs to be restored and recovered to the point-in-time when the error occurred (incomplete or point-in-time recovery).  Moreover, depending on the type of fault, it’s possible that some services – or even the entire database – would have to be taken down during the recovery process.Apart from error conditions, there are other questions that need to be addressed as part of the investigation. For example, what did the data look like in the morning, prior to the error? What were the various changes to the row(s) between two timestamps? Who performed the transaction and how can it be reversed?  Oracle Database includes built-in Flashback technologies, with features that address these challenges and questions, and enable you to perform faster, easier, and convenient recovery from logical corruptions. HistoryFlashback Query, the first Flashback Technology, was introduced in Oracle 9i. It provides a simple, powerful and completely non-disruptive mechanism for data verification and recovery from logical errors, and enables users to view the state of data at a previous point in time.Flashback Technologies were further enhanced in Oracle 10g, to provide fast, easy recovery at the database, table, row, and even at a transaction level.Oracle Database 11g introduced an innovative method to manage and query long-term historical data with Flashback Data Archive. The 11g release also introduced Flashback Transaction, which provides an easy, one-step operation to back out a transaction. Oracle Database versions 11.2.0.2 and beyond further enhanced the performance of these features. Note that all the features listed here work without requiring any kind of restore operation.In addition, Flashback features are fully supported with the new multi-tenant capabilities introduced with Oracle Database 12c, Flashback Features Oracle Flashback Database enables point-in-time-recovery of the entire database without requiring a traditional restore and recovery operation. It rewinds the entire database to a specified point in time in the past by undoing all the changes that were made since that time.Oracle Flashback Table enables an entire table or a set of tables to be recovered to a point in time in the past.Oracle Flashback Drop enables accidentally dropped tables and all dependent objects to be restored.Oracle Flashback Query enables data to be viewed at a point-in-time in the past. This feature can be used to view and reconstruct data that was lost due to unintentional change(s) or deletion(s). This feature can also be used to build self-service error correction into applications, empowering end-users to undo and correct their errors.Oracle Flashback Version Query offers the ability to query the historical changes to data between two points in time or system change numbers (SCN) Oracle Flashback Transaction Query enables changes to be examined at the transaction level. This capability can be used to diagnose problems, perform analysis, audit transactions, and even revert the transaction by undoing SQLOracle Flashback Transaction is a procedure used to back-out a transaction and its dependent transactions.Flashback technologies eliminate the need for a traditional restore and recovery process to fix logical corruptions or make enquiries. Using these technologies, you can recover from the error in the same amount of time it took to generate the error. All the Flashback features can be accessed either via SQL command line (or) via Enterprise Manager.  Most of the Flashback technologies depend on the available UNDO to retrieve older data. The following table describes the various Flashback technologies: their purpose, dependencies and situations where each individual technology can be used.   Example Syntax Error investigation related:The purpose is to investigate what went wrong and what the values were at certain points in timeFlashback Queries  ( select .. as of SCN | Timestamp )   - Helps to see the value of a row/set of rows at a point in timeFlashback Version Queries  ( select .. versions between SCN | Timestamp and SCN | Timestamp)  - Helps determine how the value evolved between certain SCNs or between timestamps Flashback Transaction Queries (select .. XID=)   - Helps to understand how the transaction caused the changes.Error correction related:The purpose is to fix the error and correct the problems,Flashback Table  (flashback table .. to SCN | Timestamp)  - To rewind the table to a particular timestamp or SCN to reverse unwanted updates Flashback Drop (flashback table ..  to before drop )  - To undrop or undelete a table Flashback Database (flashback database to SCN  | Restore Point )  - This is the rewind button for Oracle databases. You can revert the entire database to a particular point in time. It is a fast way to perform a PITR (point-in-time recovery). Flashback Transaction (DBMS_FLASHBACK.TRANSACTION_BACKOUT(XID..))  - To reverse a transaction and its related transactions Advanced use cases Flashback technology is integrated into Oracle Recovery Manager (RMAN) and Oracle Data Guard. So, apart from the basic use cases mentioned above, the following use cases are addressed using Oracle Flashback. Block Media recovery by RMAN - to perform block level recovery Snapshot Standby - where the standby is temporarily converted to a read/write environment for testing, backup, or migration purposes Re-instate old primary in a Data Guard environment – this avoids the need to restore an old backup and perform a recovery to make it a new standby. Guaranteed Restore Points - to bring back the entire database to an older point-in-time in a guaranteed way. and so on..I hope this introductory overview helps you understand how Flashback features can be used to investigate and recover from logical errors.  As mentioned earlier, I will take a deeper-dive into to some of the critical Flashback features in my upcoming blogs and address common use cases.

  Read the article

• CodePlex Daily Summary for Tuesday, September 25, 2012

  CodePlex Daily Summary for Tuesday, September 25, 2012Popular ReleasesRawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.D3 Loot Tracker: 1.3: Added the ability to reload a previous session to be able to resume it. Removed goblin detection, let's keep this an item tracking utility only. Fixed a bug with crafting sound setting not working properly. Completely re-styled the UI.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.8: Version: 2.5.0.8 (Milestone 8): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Mark the class DataModel as serializable. InfoMan: Minor improvements. InfoMan: Add unit tests for all modules. Othe...LogicCircuit: LogicCircuit 2.12.9.20: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionToolbars on text note dialog are more flexible now. You can select font face, size, color, and background of text you are typing. RAM now can be initialized to one of the following: random va...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.2020.421): New features: Disable a specific part of SiteMap to keep the data without displaying them in the CRM application. It simply comments XML part of the sitemap (thanks to rboyers for this feature request) Right click an item and click on "Disable" to disable it Items disabled are greyed and a suffix "- disabled" is added Right click an item and click on "Enable" to enable it Refresh list of web resources in the web resources pickerHigLabo: HigLabo_20120919: Add XXXAsync method to all Client class for async await pattern. (HttpClient,BoxNetClient,DropboxClient,FacebookClient,FtpClient,RssClient,SugarSyncClient,TwitterClient,WindowsLiveClient) Add all api to HigLabo.Net.Ftp project. Add strong name to all assembly. Add HttpBodyMultipartFormData to provide upload multipart form data with http protocol. Add HttpBodyFormUrlEncodedData to provide form url encoded post data with http protocol. FacebookClient,RssClient,WindowsLiveClient,BoxNetClient cl...AJAX Control Toolkit: September 2012 Release: AJAX Control Toolkit Release Notes - September 2012 Release Version 60919September 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1.2 Community Edition: Sense/Net 6.1.2 Community EditionMain new featuresOur current release brings a lot of bugfixes, including the resolution of js/css editing cache issues, xlsx file handling from Office, expense claim demo workspace fixes and much more. Besides fixes 6.1.2 introduces workflow start options and other minor features like a reusable Reject client button for approval scenarios and resource editor enhancements. We have also fixed an issue with our install package to bring you a flawless installation...Solution Extender for Microsoft Dynamics CRM 2011: Solution Extender (2.0.0.6): Fix a problem when serializing entity records (this fix the problem when exporting queues)Visual C++ Directories Editor: VC++ Directories 2012 Editor v1.0 ML (x32-x64): version 1.0 ML for Visual C++ 2012WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Python Tools for Visual Studio: 1.5 RC: PTVS 1.5RC Available! We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RC. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. The primary new feature for the 1.5 release is Django including Azure support! The http://www.djangoproject.com is a pop...Launchbar: Lanchbar 4.0.0: This application requires .NET 4.5 which you can find here: www.microsoft.com/visualstudio/downloadsAssaultCube Reloaded: 2.5.4 -: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: New logo Improved airstrike! Reset nukes...Extended WPF Toolkit: Extended WPF Toolkit - 1.7.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's new in the 1.7.0 Release?New controls Zoombox Pie New features / bug fixes PropertyGrid.ShowTitle property added to allow showing/hiding the PropertyGrid title. Modifications to the PropertyGrid.EditorDefinitions collection will now automatically be applied to the PropertyGrid. Modifications to the PropertyGrid.PropertyDefinitions collection will now be reflected automaticaly...New ProjectsAffine transformations (Iterated function system): Small app for generating fractals using iterated function system.aspnet mvc store: Lite ASP.NET MVC CMSAugmented Reality: .Autocomplete: AutocompleteBCS to provide stock information in SharePoint 2013: This .Net assembly BCS external system provides live, read only data on Dow Jones 30 stocks details from MSN money webservices.Blood Alcohol Measurement Tool: Az alkalmazás kijelzi a felhasználó véralkoholszint változását az elfogyasztott alkoholos italok függvényében.Busqueda Incremental con un TEXTBOX: Hola, aqui estoy de nuevo con un aporte mas para la comunidad, en muchos foros he visto que estan buscando como hacer una busqueda incremental en un TEXTBOX.CRM 2011: Reassign or Transfer Personal Views: This Project allows CRM Administrator to quickly transfer (i.e. assign) advanced find views from one CRM user to another CRM user. ctripITSM doc: this is a documentation share for ctripITSM projectet Sprint 3: etsprint3Finance App for Windows 8: This is an WinJS Windows 8 application that computes various financial metrics.gadgets: Windows Sidebar Gargetsjprj: jprjKerosene ORM: Kerosene is a self-adaptive and configuration-less ORM library, with a SQL syntax based on C# dynamics, WCF, and Entity Framework capabilities for POCO objects.Lobster: ?? ?? ?????????.My Google Map: MyGoogleMap est un outils de génération de carte. Onestop.Contrib.CustomAdmin: Onestop.Contrib.CustomAdmin is a Theme for Orchard CMS providing for changing the admin dashboard elements such as Title and Logo.Onestop.Contrib.Disqus: Onestop.Contrib.Disqus is an advanced commenting module for Orchard CMS that uses Disqus.Onestop.Contrib.LayoutSelector: Onestop.Contrib.LayoutSelector is a simple part for switching to different versions of Layout.cshtml when editing Orchard content items.Onestop.Contrib.Navigation: Onestop.Contrib.Navigation is an advanced Menu Management system designed for Orchard CMS. Onestop.Contrib.Seo: Onestop.Contrib.Seo is an advanced Search Engine Optimization module for Orchard CMSOnestop.Contrib.SlideShow: Onestop.Contrib.SlideShow is an advanced module for managing slide animations on a page.pf2012: Simple HTML5 game as PF2012 electronic greeting.PHP-2012: this is for php for schoolPruebaProyecto: Carmen Asencio AmbrosioPulawJS: MVC Platform for JavaScript. Inspired by Zend FrameworkRevolution Emulator: Habbo Hotel flash emulator targeting the .NET 4.5 VM, written in C#.Ruby Rookie: This Project is for learning Ruby purposesSISLOG_Proy2: SISLOGSkyShellEx: SkyShellEx allows to sync any folder to SkyDrive via a simple ShellExtension. The sync option appears on the context menu of folders where applicable. sosoft: Sosoft Project.C# WinForm.Include Alarm Clock.sound9: sound9testddgit09242012: dTFS Agile Work Item Rollover: This is a command line utility used to rollover incomplete work from one sprint to the next. The tool has both interactive and silent modes, allowing you to seTFS Deployment Studio: Helps deploying applications built using TFS to the servers where they belong.TreeView In-place Editing in MVVM: This project demonstrates a clean way of doing the in-place editing in the WPF TreeView controlUniSoft: Teste source controlValidation Framework for .NET: Framework for validation of method paramters and return values.WarOfDev: war of developer, make your coding interesting . Waterhouse: A C# console application that takes various text inputs and converts it to Morse Code by blinking the numlock indicator.Web Package Pro: in dev

  Read the article

• Getting a handle on mobile data

  - by Eric Jensen

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} written by Ashok Joshi The proliferation of mobile devices in the corporate world is both a blessing as well as a challenge.  Mobile devices improve productivity and the velocity of business for the end users; on the other hand, IT departments need to manage the corporate data and applications that run on these devices. Oracle Database Mobile Server (DMS for short) provides a simple and effective way to deal with the management challenge.  DMS supports data synchronization between a central Oracle database server and data on mobile devices.  It also provides authentication, encryption and application and device management.  Finally, DMS is a highly scalable solution that can be used to manage hundreds of thousands of devices.   Here’s a simplified outline of how such a solution might work. Each device runs local sync and mgmt agents that handle bidirectional data flow with an Oracle enterprise backend, run remote commands, and provide status to the management console. For example, mobile admins could monitor multiple networks of mobile devices, upgrade their software remotely, and even destroy the local database on a compromised device. DMS supports either Oracle Berkeley DB or SQLite for device-local storage, and runs on a wide variety of mobile platforms. The schema for the device-local database is pretty simple – it contains the name of the application that’s installed on the device as well as details such as product name, version number, time of last access etc. Each mobile user has an account on the monitoring system.  DMS supports authentication via the Oracle database authentication mechanisms or alternately, via an external authentication server such as Oracle Identity Management. DMS also provides the option of encrypting the data on disk as well as while it is being synchronized. Whenever a device connects with DMS, it sends the list of all local application changes to the server; the server updates the central repository with this information.  Synchronization can be triggered on-demand, whenever there’s a change on the device (e.g. new application installed or an existing application removed) or via a rule-based schedule (e.g. every Saturday). Synchronization is very fast and efficient, since only the changes are propagated.  This includes resume capability; should synchronization be interrupted for any reason, the next synchronization will resume where the previous synchronization was interrupted. If the device should be lost or stolen, DMS has the capability to remove the applications and/or data from the device. This ability to control access to sensitive data and applications is critical in the corporate environment. The central repository also allows the IT manager to track the kinds of applications that mobile users use and recommend patches and upgrades, while still allowing the mobile user full control over what applications s/he downloads and uses on the device.  This is useful since most devices are used for corporate as well as personal information. In certain restricted use scenarios, the IT manager can also control whether a certain application can be installed on a mobile device.  Should an unapproved application be installed, it can easily be removed the next time the device connects with the central server. Oracle Database mobile server provides a simple, effective and highly secure and scalable solution for managing the data and applications for the mobile workforce.

  Read the article

• Refactoring a Single Rails Model with large methods & long join queries trying to do everything

  - by Kelseydh

  I have a working Ruby on Rails Model that I suspect is inefficient, hard to maintain, and full of unnecessary SQL join queries. I want to optimize and refactor this Model (Quiz.rb) to comply with Rails best practices, but I'm not sure how I should do it. The Rails app is a game that has Missions with many Stages. Users complete Stages by answering Questions that have correct or incorrect Answers. When a User tries to complete a stage by answering questions, the User gets a Quiz entry with many Attempts. Each Attempt records an Answer submitted for that Question within the Stage. A user completes a stage or mission by getting every Attempt correct, and their progress is tracked by adding a new entry to the UserMission & UserStage join tables. All of these features work, but unfortunately the Quiz.rb Model has been twisted to handle almost all of it exclusively. The callbacks began at 'Quiz.rb', and because I wasn't sure how to leave the Quiz Model during a multi-model update, I resorted to using Rails Console to have the @quiz instance variable via self.some_method do all the heavy lifting to retrieve every data value for the game's business logic; resulting in large extended join queries that "dance" all around the Database schema. The Quiz.rb Model that Smells: class Quiz < ActiveRecord::Base belongs_to :user has_many :attempts, dependent: :destroy before_save :check_answer before_save :update_user_mission_and_stage accepts_nested_attributes_for :attempts, :reject_if => lambda { |a| a[:answer_id].blank? }, :allow_destroy => true #Checks every answer within each quiz, adding +1 for each correct answer #within a stage quiz, and -1 for each incorrect answer def check_answer stage_score = 0 self.attempts.each do |attempt| if attempt.answer.correct? == true stage_score += 1 elsif attempt.answer.correct == false stage_score - 1 end end stage_score end def winner return true end def update_user_mission_and_stage ####### #Step 1: Checks if UserMission exists, finds or creates one. #if no UserMission for the current mission exists, creates a new UserMission if self.user_has_mission? == false @user_mission = UserMission.new(user_id: self.user.id, mission_id: self.current_stage.mission_id, available: true) @user_mission.save else @user_mission = self.find_user_mission end ####### #Step 2: Checks if current UserStage exists, stops if true to prevent duplicate entry if self.user_has_stage? @user_mission.save return true else ####### ##Step 3: if step 2 returns false: ##Initiates UserStage creation instructions #checks for winner (winner actions need to be defined) if they complete last stage of last mission for a given orientation if self.passed? && self.is_last_stage? && self.is_last_mission? create_user_stage_and_update_user_mission self.winner #NOTE: The rest are the same, but specify conditions that are available to add badges or other actions upon those conditions occurring: ##if user completes first stage of a mission elsif self.passed? && self.is_first_stage? && self.is_first_mission? create_user_stage_and_update_user_mission #creates user badge for finishing first stage of first mission self.user.add_badge(5) self.user.activity_logs.create(description: "granted first-stage badge", type_event: "badge", value: "first-stage") #If user completes last stage of a given mission, creates a new UserMission elsif self.passed? && self.is_last_stage? && self.is_first_mission? create_user_stage_and_update_user_mission #creates user badge for finishing first mission self.user.add_badge(6) self.user.activity_logs.create(description: "granted first-mission badge", type_event: "badge", value: "first-mission") elsif self.passed? create_user_stage_and_update_user_mission else self.passed? == false return true end end end #Creates a new UserStage record in the database for a successful Quiz question passing def create_user_stage_and_update_user_mission @nu_stage = @user_mission.user_stages.new(user_id: self.user.id, stage_id: self.current_stage.id) @nu_stage.save @user_mission.save self.user.add_points(50) end #Boolean that defines passing a stage as answering every question in that stage correct def passed? self.check_answer >= self.number_of_questions end #Returns the number of questions asked for that stage's quiz def number_of_questions self.attempts.first.answer.question.stage.questions.count end #Returns the current_stage for the Quiz, routing through 1st attempt in that Quiz def current_stage self.attempts.first.answer.question.stage end #Gives back the position of the stage relative to its mission. def stage_position self.attempts.first.answer.question.stage.position end #will find the user_mission for the current user and stage if it exists def find_user_mission self.user.user_missions.find_by_mission_id(self.current_stage.mission_id) end #Returns true if quiz was for the last stage within that mission #helpful for triggering actions related to a user completing a mission def is_last_stage? self.stage_position == self.current_stage.mission.stages.last.position end #Returns true if quiz was for the first stage within that mission #helpful for triggering actions related to a user completing a mission def is_first_stage? self.stage_position == self.current_stage.mission.stages_ordered.first.position end #Returns true if current user has a UserMission for the current stage def user_has_mission? self.user.missions.ids.include?(self.current_stage.mission.id) end #Returns true if current user has a UserStage for the current stage def user_has_stage? self.user.stages.include?(self.current_stage) end #Returns true if current user is on the last mission based on position within a given orientation def is_first_mission? self.user.missions.first.orientation.missions.by_position.first.position == self.current_stage.mission.position end #Returns true if current user is on the first stage & mission of a given orientation def is_last_mission? self.user.missions.first.orientation.missions.by_position.last.position == self.current_stage.mission.position end end My Question Currently my Rails server takes roughly 500ms to 1 sec to process single @quiz.save action. I am confident that the slowness here is due to sloppy code, not bad Database ERD design. What does a better solution look like? And specifically: Should I use join queries to retrieve values like I did here, or is it better to instantiate new objects within the model instead? Or am I missing a better solution? How should update_user_mission_and_stage be refactored to follow best practices? Relevant Code for Reference: quizzes_controller.rb w/ Controller Route Initiating Callback: class QuizzesController < ApplicationController before_action :find_stage_and_mission before_action :find_orientation before_action :find_question def show end def create @user = current_user @quiz = current_user.quizzes.new(quiz_params) if @quiz.save if @quiz.passed? if @mission.next_mission.nil? && @stage.next_stage.nil? redirect_to root_path, notice: "Congratulations, you have finished the last mission!" elsif @stage.next_stage.nil? redirect_to [@mission.next_mission, @mission.first_stage], notice: "Correct! Time for Mission #{@mission.next_mission.position}", info: "Starting next mission" else redirect_to [@mission, @stage.next_stage], notice: "Answer Correct! You passed the stage!" end else redirect_to [@mission, @stage], alert: "You didn't get every question right, please try again." end else redirect_to [@mission, @stage], alert: "Sorry. We were unable to save your answer. Please contact the admministrator." end @questions = @stage.questions.all end private def find_stage_and_mission @stage = Stage.find(params[:stage_id]) @mission = @stage.mission end def find_question @question = @stage.questions.find_by_id params[:id] end def quiz_params params.require(:quiz).permit(:user_id, :attempt_id, {attempts_attributes: [:id, :quiz_id, :answer_id]}) end def find_orientation @orientation = @mission.orientation @missions = @orientation.missions.by_position end end Overview of Relevant ERD Database Relationships: Mission - Stage - Question - Answer - Attempt <- Quiz <- User Mission - UserMission <- User Stage - UserStage <- User Other Models: Mission.rb class Mission < ActiveRecord::Base belongs_to :orientation has_many :stages has_many :user_missions, dependent: :destroy has_many :users, through: :user_missions #SCOPES scope :by_position, -> {order(position: :asc)} def stages_ordered stages.order(:position) end def next_mission self.orientation.missions.find_by_position(self.position.next) end def first_stage next_mission.stages_ordered.first end end Stage.rb: class Stage < ActiveRecord::Base belongs_to :mission has_many :questions, dependent: :destroy has_many :user_stages, dependent: :destroy has_many :users, through: :user_stages accepts_nested_attributes_for :questions, reject_if: :all_blank, allow_destroy: true def next_stage self.mission.stages.find_by_position(self.position.next) end end Question.rb class Question < ActiveRecord::Base belongs_to :stage has_many :answers, dependent: :destroy accepts_nested_attributes_for :answers, :reject_if => lambda { |a| a[:body].blank? }, :allow_destroy => true end Answer.rb: class Answer < ActiveRecord::Base belongs_to :question has_many :attempts, dependent: :destroy end Attempt.rb: class Attempt < ActiveRecord::Base belongs_to :answer belongs_to :quiz end User.rb: class User < ActiveRecord::Base belongs_to :school has_many :activity_logs has_many :user_missions, dependent: :destroy has_many :missions, through: :user_missions has_many :user_stages, dependent: :destroy has_many :stages, through: :user_stages has_many :orientations, through: :school has_many :quizzes, dependent: :destroy has_many :attempts, through: :quizzes def latest_stage_position self.user_missions.last.user_stages.last.stage.position end end UserMission.rb class UserMission < ActiveRecord::Base belongs_to :user belongs_to :mission has_many :user_stages, dependent: :destroy end UserStage.rb class UserStage < ActiveRecord::Base belongs_to :user belongs_to :stage belongs_to :user_mission end

  Read the article

• Automating deployments with the SQL Compare command line

  - by Jonathan Hickford

  In my previous article, “Five Tips to Get Your Organisation Releasing Software Frequently” I looked at how teams can automate processes to speed up release frequency. In this post, I’m looking specifically at automating deployments using the SQL Compare command line. SQL Compare compares SQL Server schemas and deploys the differences. It works very effectively in scenarios where only one deployment target is required – source and target databases are specified, compared, and a change script is automatically generated and applied. But if multiple targets exist, and pressure to increase the frequency of releases builds, this solution quickly becomes unwieldy.   This is where SQL Compare’s command line comes into its own. I’ve put together a PowerShell script that loops through the Servers table and pulls out the server and database, these are then passed to sqlcompare.exe to be used as target parameters. In the example the source database is a scripts folder, a folder structure of scripted-out database objects used by both SQL Source Control and SQL Compare. The script can easily be adapted to use schema snapshots.     -- Create a DeploymentTargets database and a Servers table CREATE DATABASE DeploymentTargets GO USE DeploymentTargets GO CREATE TABLE [dbo].[Servers]( [id] [int] IDENTITY(1,1) NOT NULL, [serverName] [nvarchar](50) NULL, [environment] [nvarchar](50) NULL, [databaseName] [nvarchar](50) NULL, CONSTRAINT [PK_Servers] PRIMARY KEY CLUSTERED ([id] ASC) ) GO -- Now insert your target server and database details INSERT INTO dbo.Servers ( serverName , environment , databaseName) VALUES ( N'myserverinstance' , N'myenvironment1' , N'mydb1') INSERT INTO dbo.Servers ( serverName , environment , databaseName) VALUES ( N'myserverinstance' , N'myenvironment2' , N'mydb2') Here’s the PowerShell script you can adapt for yourself as well. # We're holding the server names and database names that we want to deploy to in a database table. # We need to connect to that server to read these details $serverName = "" $databaseName = "DeploymentTargets" $authentication = "Integrated Security=SSPI" #$authentication = "User Id=xxx;PWD=xxx" # If you are using database authentication instead of Windows authentication. # Path to the scripts folder we want to deploy to the databases $scriptsPath = "SimpleTalk" # Path to SQLCompare.exe $SQLComparePath = "C:\Program Files (x86)\Red Gate\SQL Compare 10\sqlcompare.exe" # Create SQL connection string, and connection $ServerConnectionString = "Data Source=$serverName;Initial Catalog=$databaseName;$authentication" $ServerConnection = new-object system.data.SqlClient.SqlConnection($ServerConnectionString); # Create a Dataset to hold the DataTable $dataSet = new-object "System.Data.DataSet" "ServerList" # Create a query $query = "SET NOCOUNT ON;" $query += "SELECT serverName, environment, databaseName " $query += "FROM dbo.Servers; " # Create a DataAdapter to populate the DataSet with the results $dataAdapter = new-object "System.Data.SqlClient.SqlDataAdapter" ($query, $ServerConnection) $dataAdapter.Fill($dataSet) | Out-Null # Close the connection $ServerConnection.Close() # Populate the DataTable $dataTable = new-object "System.Data.DataTable" "Servers" $dataTable = $dataSet.Tables[0] #For every row in the DataTable $dataTable | FOREACH-OBJECT { "Server Name: $($_.serverName)" "Database Name: $($_.databaseName)" "Environment: $($_.environment)" # Compare the scripts folder to the database and synchronize the database to match # NB. Have set SQL Compare to abort on medium level warnings. $arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/AbortOnWarnings:Medium") # + @("/sync" ) # Commented out the 'sync' parameter for safety, write-host $arguments & $SQLComparePath $arguments "Exit Code: $LASTEXITCODE" # Some interesting variations # Check that every database matches a folder. # For example this might be a pre-deployment step to validate everything is at the same baseline state. # Or a post deployment script to validate the deployment worked. # An exit code of 0 means the databases are identical. # # $arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/Assertidentical") # Generate a report of the difference between the folder and each database. Generate a SQL update script for each database. # For example use this after the above to generate upgrade scripts for each database # Examine the warnings and the HTML diff report to understand how the script will change objects # #$arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/ScriptFile:update_$($_.environment+"_"+$_.databaseName).sql", "/report:update_$($_.environment+"_"+$_.databaseName).html" , "/reportType:Interactive", "/showWarnings", "/include:Identical") } It’s worth noting that the above example generates the deployment scripts dynamically. This approach should be problem-free for the vast majority of changes, but it is still good practice to review and test a pre-generated deployment script prior to deployment. An alternative approach would be to pre-generate a single deployment script using SQL Compare, and run this en masse to multiple targets programmatically using sqlcmd, or using a tool like SQL Multi Script.  You can use the /ScriptFile, /report, and /showWarnings flags to generate change scripts, difference reports and any warnings.  See the commented out example in the PowerShell: #$arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/ScriptFile:update_$($_.environment+"_"+$_.databaseName).sql", "/report:update_$($_.environment+"_"+$_.databaseName).html" , "/reportType:Interactive", "/showWarnings", "/include:Identical") There is a drawback of running a pre-generated deployment script; it assumes that a given database target hasn’t drifted from its expected state. Often there are (rightly or wrongly) many individuals within an organization who have permissions to alter the production database, and changes can therefore be made outside of the prescribed development processes. The consequence is that at deployment time, the applied script has been validated against a target that no longer represents reality. The solution here would be to add a check for drift prior to running the deployment script. This is achieved by using sqlcompare.exe to compare the target against the expected schema snapshot using the /Assertidentical flag. Should this return any differences (sqlcompare.exe Exit Code 79), a drift report is outputted instead of executing the deployment script.  See the commented out example. # $arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/Assertidentical") Any checks and processes that should be undertaken prior to a manual deployment, should also be happen during an automated deployment. You might think about triggering backups prior to deployment – even better, automate the verification of the backup too.   You can use SQL Compare’s command line interface along with PowerShell to automate multiple actions and checks that you need in your deployment process. Automation is a practical solution where multiple targets and a higher release cadence come into play. As we know, with great power comes great responsibility – responsibility to ensure that the necessary checks are made so deployments remain trouble-free.  (The code sample supplied in this post automates the simple dynamic deployment case – if you are considering more advanced automation, e.g. the drift checks, script generation, deploying to large numbers of targets and backup/verification, please email me at [email protected] for further script samples or if you have further questions)

  Read the article

• Premature-Optimization and Performance Anxiety

  - by James Michael Hare

  While writing my post analyzing the new .NET 4 ConcurrentDictionary class (here), I fell into one of the classic blunders that I myself always love to warn about.  After analyzing the differences of time between a Dictionary with locking versus the new ConcurrentDictionary class, I noted that the ConcurrentDictionary was faster with read-heavy multi-threaded operations.  Then, I made the classic blunder of thinking that because the original Dictionary with locking was faster for those write-heavy uses, it was the best choice for those types of tasks.  In short, I fell into the premature-optimization anti-pattern. Basically, the premature-optimization anti-pattern is when a developer is coding very early for a perceived (whether rightly-or-wrongly) performance gain and sacrificing good design and maintainability in the process.  At best, the performance gains are usually negligible and at worst, can either negatively impact performance, or can degrade maintainability so much that time to market suffers or the code becomes very fragile due to the complexity. Keep in mind the distinction above.  I'm not talking about valid performance decisions.  There are decisions one should make when designing and writing an application that are valid performance decisions.  Examples of this are knowing the best data structures for a given situation (Dictionary versus List, for example) and choosing performance algorithms (linear search vs. binary search).  But these in my mind are macro optimizations.  The error is not in deciding to use a better data structure or algorithm, the anti-pattern as stated above is when you attempt to over-optimize early on in such a way that it sacrifices maintainability. In my case, I was actually considering trading the safety and maintainability gains of the ConcurrentDictionary (no locking required) for a slight performance gain by using the Dictionary with locking.  This would have been a mistake as I would be trading maintainability (ConcurrentDictionary requires no locking which helps readability) and safety (ConcurrentDictionary is safe for iteration even while being modified and you don't risk the developer locking incorrectly) -- and I fell for it even when I knew to watch out for it.  I think in my case, and it may be true for others as well, a large part of it was due to the time I was trained as a developer.  I began college in in the 90s when C and C++ was king and hardware speed and memory were still relatively priceless commodities and not to be squandered.  In those days, using a long instead of a short could waste precious resources, and as such, we were taught to try to minimize space and favor performance.  This is why in many cases such early code-bases were very hard to maintain.  I don't know how many times I heard back then to avoid too many function calls because of the overhead -- and in fact just last year I heard a new hire in the company where I work declare that she didn't want to refactor a long method because of function call overhead.  Now back then, that may have been a valid concern, but with today's modern hardware even if you're calling a trivial method in an extremely tight loop (which chances are the JIT compiler would optimize anyway) the results of removing method calls to speed up performance are negligible for the great majority of applications.  Now, obviously, there are those coding applications where speed is absolutely king (for example drivers, computer games, operating systems) where such sacrifices may be made.  But I would strongly advice against such optimization because of it's cost.  Many folks that are performing an optimization think it's always a win-win.  That they're simply adding speed to the application, what could possibly be wrong with that?  What they don't realize is the cost of their choice.  For every piece of straight-forward code that you obfuscate with performance enhancements, you risk the introduction of bugs in the long term technical debt of the application.  It will become so fragile over time that maintenance will become a nightmare.  I've seen such applications in places I have worked.  There are times I've seen applications where the designer was so obsessed with performance that they even designed their own memory management system for their application to try to squeeze out every ounce of performance.  Unfortunately, the application stability often suffers as a result and it is very difficult for anyone other than the original designer to maintain. I've even seen this recently where I heard a C++ developer bemoaning that in VS2010 the iterators are about twice as slow as they used to be because Microsoft added range checking (probably as part of the 0x standard implementation).  To me this was almost a joke.  Twice as slow sounds bad, but it almost never as bad as you think -- especially if you're gaining safety.  The only time twice is really that much slower is when once was too slow to begin with.  Think about it.  2 minutes is slow as a response time because 1 minute is slow.  But if an iterator takes 1 microsecond to move one position and a new, safer iterator takes 2 microseconds, this is trivial!  The only way you'd ever really notice this would be in iterating a collection just for the sake of iterating (i.e. no other operations).  To my mind, the added safety makes the extra time worth it. Always favor safety and maintainability when you can.  I know it can be a hard habit to break, especially if you started out your career early or in a language such as C where they are very performance conscious.  But in reality, these type of micro-optimizations only end up hurting you in the long run. Remember the two laws of optimization.  I'm not sure where I first heard these, but they are so true: For beginners: Do not optimize. For experts: Do not optimize yet. This is so true.  If you're a beginner, resist the urge to optimize at all costs.  And if you are an expert, delay that decision.  As long as you have chosen the right data structures and algorithms for your task, your performance will probably be more than sufficient.  Chances are it will be network, database, or disk hits that will be your slow-down, not your code.  As they say, 98% of your code's bottleneck is in 2% of your code so premature-optimization may add maintenance and safety debt that won't have any measurable impact.  Instead, code for maintainability and safety, and then, and only then, when you find a true bottleneck, then you should go back and optimize further.

  Read the article

• While installing updates I get "Package operation Failed" for ubuntu 12.04

  - by user54395

  i get the following response in the details:- Please help nstallArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 427340 files and directories currently installed.) Preparing to replace thunderbird-trunk-globalmenu 14.0~a1~hg20120409r9862.91177-0ubuntu1~umd1 (using .../thunderbird-trunk-globalmenu_14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1_i386.deb) ... Unpacking replacement thunderbird-trunk-globalmenu ... Preparing to replace thunderbird-trunk 14.0~a1~hg20120409r9862.91177-0ubuntu1~umd1 (using .../thunderbird-trunk_14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1_i386.deb) ... Unpacking replacement thunderbird-trunk ... Processing triggers for man-db ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Processing triggers for desktop-file-utils ... Setting up crossplatformui (1.0.27) ... Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service acpid restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop acpid ; start acpid. The restart(8) utility is also available. acpid stop/waiting acpid start/running, process 5286 package libqtgui4 exist QT_VERSION = 4 make -C /lib/modules/3.2.0-22-generic/build M=/usr/local/bin/ztemtApp/zteusbserial/below2.6.27 modules make[1]: Entering directory /usr/src/linux-headers-3.2.0-22-generic' CC [M] /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.c:34:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. make[2]: *** [/usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o] Error 1 make[1]: *** [_module_/usr/local/bin/ztemtApp/zteusbserial/below2.6.27] Error 2 make[1]: Leaving directory/usr/src/linux-headers-3.2.0-22-generic' make: * [modules] Error 2 dpkg: error processing crossplatformui (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up thunderbird-trunk (14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1) ... Setting up thunderbird-trunk-globalmenu (14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1) ... Errors were encountered while processing: crossplatformui Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up crossplatformui (1.0.27) ... Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service acpid restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop acpid ; start acpid. The restart(8) utility is also available. acpid stop/waiting acpid start/running, process 5541 package libqtgui4 exist QT_VERSION = 4 make -C /lib/modules/3.2.0-22-generic/build M=/usr/local/bin/ztemtApp/zteusbserial/below2.6.27 modules make[1]: Entering directory /usr/src/linux-headers-3.2.0-22-generic' CC [M] /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.c:34:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. make[2]: *** [/usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o] Error 1 make[1]: *** [_module_/usr/local/bin/ztemtApp/zteusbserial/below2.6.27] Error 2 make[1]: Leaving directory/usr/src/linux-headers-3.2.0-22-generic' make: * [modules] Error 2 dpkg: error processing crossplatformui (--configure): subprocess installed post-installation script returned error exit status 2

  Read the article

• Design review for application facing memory issues

  - by Mr Moose

  I apologise in advance for the length of this post, but I want to paint an accurate picture of the problems my app is facing and then pose some questions below; I am trying to address some self inflicted design pain that is now leading to my application crashing due to out of memory errors. An abridged description of the problem domain is as follows; The application takes in a “dataset” that consists of numerous text files containing related data An individual text file within the dataset usually contains approx 20 “headers” that contain metadata about the data it contains. It also contains a large tab delimited section containing data that is related to data in one of the other text files contained within the dataset. The number of columns per file is very variable from 2 to 256+ columns. The original application was written to allow users to load a dataset, map certain columns of each of the files which basically indicating key information on the files to show how they are related as well as identify a few expected column names. Once this is done, a validation process takes place to enforce various rules and ensure that all the relationships between the files are valid. Once that is done, the data is imported into a SQL Server database. The database design is an EAV (Entity-Attribute-Value) model used to cater for the variable columns per file. I know EAV has its detractors, but in this case, I feel it was a reasonable choice given the disparate data and variable number of columns submitted in each dataset. The memory problem Given the fact the combined size of all text files was at most about 5 megs, and in an effort to reduce the database transaction time, it was decided to read ALL the data from files into memory and then perform the following; perform all the validation whilst the data was in memory relate it using an object model Start DB transaction and write the key columns row by row, noting the Id of the written row (all tables in the database utilise identity columns), then the Id of the newly written row is applied to all related data Once all related data had been updated with the key information to which it relates, these records are written using SqlBulkCopy. Due to our EAV model, we essentially have; x columns by y rows to write, where x can by 256+ and rows are often into the tens of thousands. Once all the data is written without error (can take several minutes for large datasets), Commit the transaction. The problem now comes from the fact we are now receiving individual files containing over 30 megs of data. In a dataset, we can receive any number of files. We’ve started seen datasets of around 100 megs coming in and I expect it is only going to get bigger from here on in. With files of this size, data can’t even be read into memory without the app falling over, let alone be validated and imported. I anticipate having to modify large chunks of the code to allow validation to occur by parsing files line by line and am not exactly decided on how to handle the import and transactions. Potential improvements I’ve wondered about using GUIDs to relate the data rather than relying on identity fields. This would allow data to be related prior to writing to the database. This would certainly increase the storage required though. Especially in an EAV design. Would you think this is a reasonable thing to try, or do I simply persist with identity fields (natural keys can’t be trusted to be unique across all submitters). Use of staging tables to get data into the database and only performing the transaction to copy data from staging area to actual destination tables. Questions For systems like this that import large quantities of data, how to you go about keeping transactions small. I’ve kept them as small as possible in the current design, but they are still active for several minutes and write hundreds of thousands of records in one transaction. Is there a better solution? The tab delimited data section is read into a DataTable to be viewed in a grid. I don’t need the full functionality of a DataTable, so I suspect it is overkill. Is there anyway to turn off various features of DataTables to make them more lightweight? Are there any other obvious things you would do in this situation to minimise the memory footprint of the application described above? Thanks for your kind attention.

  Read the article

• Architect Day: Boston - Agenda Update

  - by Bob Rhubart

  Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. When: September 12, 2012 8:30am – 5:00pm Where: Boston Marriott Burlington One Burlington Mall Road Burlington, MA 01803 Register now Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast Salon E Foyer 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Salon E 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Salon E 10:00 am - 10:30 am Securing Public and Private Clouds | Anton Nielsen Long before the term "Cloud Computing" existed, Oracle technologies supported and promoted the concept. Centralized data with remote users has been at the core of these technologies for decades. The public cloud, and extending private clouds to the internet, though, has added security challenges never imagined decades ago. This presentation will examine a real life security breach and introduce architecture, technologies and policies to secure public and private clouds.  Salon E 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Salon E Innovations in Grid Computing with Oracle Coherence | Rob Misek Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Salon C 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Salon E Oracle Enterprise Manager | Avi Huber Much more than a DB management tool, Oracle Enterprise Manager provides management and monitoring coverage for the entire Oracle stack, and beyond. This session will concentrate on the middleware management functionality in OEM, starting with Real User Experience monitoring, through AppServer management, and into deep-dive Java diagnostics. We’ll discuss Business Driven Application Management (BDAM) and the benefits of top-down monitoring. Lastly, we’ll demonstrate how to trace a specific user experience problem, through a multitier SOA application, to its root cause, deep in the JVM. Salon C 12:15 pm - 1:15 pm Lunch Salon E Foyer 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Salon E 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy (ETS). Salon E 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Salon C 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Salon E 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Salon E 4:15 pm - 5:00 pm Networking / Reception Salon E Foyer Note: Session schedule and content subject to change.

  Read the article

• CodePlex Daily Summary for Friday, August 22, 2014

  CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

  Read the article

• How-to delete a tree node using the context menu

  - by frank.nimphius

  Hierarchical trees in Oracle ADF make use of View Accessors, which means that only the top level node needs to be exposed as a View Object instance on the ADF Business Components Data Model. This also means that only the top level node has a representation in the PageDef file as a tree binding and iterator binding reference. Detail nodes are accessed through tree rule definitions that use the accessor mentioned above (or nested collections in the case of POJO or EJB business services). The tree component is configured for single node selection, which however can be declaratively changed for users to press the ctrl key and selecting multiple nodes. In the following, I explain how to create a context menu on the tree for users to delete the selected tree nodes. For this, the context menu item will access a managed bean, which then determines the selected node(s), the internal ADF node bindings and the rows they represent. As mentioned, the ADF Business Components Data Model only needs to expose the top level node data sources, which in this example is an instance of the Locations View Object. For the tree to work, you need to have associations defined between entities, which usually is done for you by Oracle JDeveloper if the database tables have foreign keys defined Note: As a general hint of best practices and to simplify your life: Make sure your database schema is well defined and designed before starting your development project. Don't treat the database as something organic that grows and changes with the requirements as you proceed in your project. Business service refactoring in response to database changes is possible, but should be treated as an exception, not the rule. Good database design is a necessity – even for application developers – and nothing evil. To create the tree component, expand the Data Controls panel and drag the View Object collection to the view. From the context menu, select the tree component entry and continue with defining the tree rules that make up the hierarchical structure. As you see, when pressing the green plus icon  in the Edit Tree Binding  dialog, the data structure, Locations -  Departments – Employees in my sample, shows without you having created a View Object instance for each of the nodes in the ADF Business Components Data Model. After you configured the tree structure in the Edit Tree Binding dialog, you press OK and the tree is created. Select the tree in the page editor and open the Structure Window (ctrl+shift+S). In the Structure window, expand the tree node to access the conextMenu facet. Use the right mouse button to insert a Popup  into the facet. Repeat the same steps to insert a Menu and a Menu Item into the Popup you created. The Menu item text should be changed to something meaningful like "Delete". Note that the custom menu item later is added to the context menu together with the default context menu options like expand and expand all. To define the action that is executed when the menu item is clicked on, you select the Action Listener property in the Property Inspector and click the arrow icon followed by the Edit menu option. Create or select a managed bean and define a method name for the action handler. Next, select the tree component and browse to its binding property in the Property Inspector. Again, use the arrow icon | Edit option to create a component binding in the same managed bean that has the action listener defined. The tree handle is used in the action listener code, which is shown below: public void onTreeNodeDelete(ActionEvent actionEvent) {   //access the tree from the JSF component reference created   //using the af:tree "binding" property. The "binding" property   //creates a pair of set/get methods to access the RichTree instance   RichTree tree = this.getTreeHandler();   //get the list of selected row keys   RowKeySet rks = tree.getSelectedRowKeys();   //access the iterator to loop over selected nodes   Iterator rksIterator = rks.iterator();          //The CollectionModel represents the tree model and is   //accessed from the tree "value" property   CollectionModel model = (CollectionModel) tree.getValue();   //The CollectionModel is a wrapper for the ADF tree binding   //class, which is JUCtrlHierBinding   JUCtrlHierBinding treeBinding =                  (JUCtrlHierBinding) model.getWrappedData();          //loop over the selected nodes and delete the rows they   //represent   while(rksIterator.hasNext()){     List nodeKey = (List) rksIterator.next();     //find the ADF node binding using the node key     JUCtrlHierNodeBinding node =                       treeBinding.findNodeByKeyPath(nodeKey);     //delete the row.     Row rw = node.getRow();       rw.remove();   }          //only refresh the tree if tree nodes have been selected   if(rks.size() > 0){     AdfFacesContext adfFacesContext =                          AdfFacesContext.getCurrentInstance();     adfFacesContext.addPartialTarget(tree);   } } Note: To enable multi node selection for a tree, select the tree and change the row selection setting from "single" to "multiple". Note: a fully pictured version of this post will become available at the end of the month in a PDF summary on ADF Code Corner : http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html 

  Read the article

• CodePlex Daily Summary for Tuesday, July 02, 2013

  CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

  Read the article

< Previous Page | 662 663 664 665 666 667 668 669 670 671 672 673  | Next Page >