Search Results

Search found 64585 results on 2584 pages for 'jm at work'.

Page 67/2584 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• new PC not work with existing router, but works fine when directly connecting to cable modem

  - by user34786

  I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

  Read the article

• Kill xserver from command line (init 3/5 does not work)

  - by Richard Martinez

  I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

  Read the article

• DNS works only with ip but does not work with NS CentOS + Bind9

  - by Borislav Yordanov

  I am having a headache with DNS. Lets say my public IP is 1.2.3.4, my local IP is 192.168.0.10 and my domain is example.com I am running CentOS on a virtual machine (Parallels Desktop for Mac) with a LAN card reserved for it, so it gets Ip directly from the router. I have ports 80,443,53 forwarded to 192.168.0.10. Both Mac OS and CentOs firewalls are Off. The strange is when I type dig @1.2.3.4 example.com from my other PC I get: ; <<>> DiG 9.8.3-P1 <<>> @1.2.3.4 example.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 16941 ;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;example.com. IN A ;; ANSWER SECTION: example.com. 86400 IN A 1.2.3.4 ;; AUTHORITY SECTION: example.com. 86400 IN NS ns2.example.com. example.com. 86400 IN NS ns1.example.com. ;; ADDITIONAL SECTION: ns1.example.com. 86400 IN A 1.2.3.4 ns2.example.com. 86400 IN A 1.2.3.4 ;; Query time: 8 msec ;; SERVER: 1.2.3.4#53(1.2.3.4) ;; WHEN: Sat Nov 2 09:37:36 2013 ;; MSG SIZE rcvd: 109 but when i type: dig @ns1.example.com example.com it waits a few seconds and returns dig: couldn't get address for 'ns1.dsht.in': not found This is my config file: /etc/named.conf options { listen-on-v6 { none; }; directory"/var/named"; dump-file"/var/named/data/cache_dump.db"; statistics-file"/var/named/data/named_stats.txt"; memstatistics-file"/var/named/data/named_mem_stats.txt"; allow-query{ localhost; 192.168.0.0/24; }; allow-transfer { localhost; 192.168.0.0/24; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; # change all from here view "internal" { match-clients { localhost; 192.168.0.0/24; }; zone "." IN { type hint; file "named.ca"; }; zone "example.com" IN { type master; file "example.com.zone"; allow-update { none; }; }; zone "0.168.192.in-addr.arpa" IN { type master; file "0.168.192.in-addr.arpa"; allow-update { none; }; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; }; view "external" { match-clients { any; }; allow-query { any; }; recursion no; zone "example.com" IN { type master; file "example.com.zone"; allow-update { none; }; }; zone "4.3.2.1.in-addr.arpa" IN { type master; file "4.3.2.1.in-addr.arpa"; allow-update { none; }; }; }; /var/named/exmaple.com.zone $TTL 86400 @ IN SOA ns1.example.com. host.example.com. ( 2013042201 ;Serial 3600 ;Refresh 1800 ;Retry 604800 ;Expire 86400 ;Minimum TTL ) ; Specify our two nameservers IN NS ns1.example.com. IN NS ns2.example.com. ; Resolve nameserver hostnames to IP, replace with your two droplet IP addresses. ns1 IN A 1.2.3.4 ns2 IN A 1.2.3.4 ; Define hostname -> IP pairs which you wish to resolve @ IN A 1.2.3.4 IN A 1.2.3.4 www IN A 1.2.3.4 server2 IN A 192.168.0.2 * IN A 1.2.3.4 /var/named/4.3.2.1.in-addr.arpa $TTL 2d ; 172800 seconds $ORIGIN 4.3.2.1.IN-ADDR.ARPA. @ IN SOA ns1.example.com. host.example.com. ( 2013010304 ; serial number 3h ; refresh 15m ; update retry 3w ; expiry 3h ; nx = nxdomain ttl ) IN NS ns1.example.com. IN NS ns2.example.com. IN PTR example.com. ; etc /var/named/0.168.192.in-addr.arpa $TTL 2d ; 172800 seconds $ORIGIN 0.168.192.IN-ADDR.ARPA. @ IN SOA ns1.example.com. host.example.com. ( 2013010304 ; serial number 3h ; refresh 15m ; update retry 3w ; expiry 3h ; nx = nxdomain ttl ) IN NS ns1.example.com. IN NS ns2.example.com. 10 IN PTR example.com. 2 IN PTR server2.example.com ; etc I will be very glad if someone can help me. Thank you in advance

  Read the article

• Chrome Web Browser does not Work While IE does

  - by aspendox

  When I try to start Chrome Web Browser, "User Account Control" window opens and ask whether I give permission to this application to make changes in my computer. I give the permission, Chrome opens but could not connect to the Internet. There is no error in the opened page. But when I try to connect to internet via IE, it works. I've been experiencing this issue since yesterday, I was able to use Chrome before.

  Read the article

• why save_model method doesn't work in admin.StackedInline?

  - by FurtiveFelon

  Hi all, I have a similar problem as a previously solved problem of mine, except this time solution doesn't seem to work: http://stackoverflow.com/questions/2991365/how-to-auto-insert-the-current-user-when-creating-an-object-in-django-admin Previously i used to override the save_model to stamp the user submitting the article. Now i need to do the same for comments, it doesn't seem to work anymore. Anyone have any ideas? Thanks a lot! Jason

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• safari 5 doesnt work on my computer.

  - by Amairani409

  I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• IIS7 80 port outside doesn't work

  - by ihorko

  I have created web site, added to IIS 7, in the binding set up host name as "mysite.com". (here "mysite.com" is my registered domain that points to my IP address) So when I assigned port 8095 and open site as mysite.com:8095 it succesfully opens on my local pc and outsite my network pc, but if I set up port 80 there, http://mysite.com opens only on my pc, but not in outside pc. Firewall is disabled. How to resolve that problem, please help!?

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• Intel 82865G Graphics Controller - making it work in Windows 7

  - by abrams

  RE: Putting this out there in case someone else runs into this issue. The intel chipset is on-board. I discovered the reason for the crappy resolution in windows 7 was that the memory to share with the video card was set to 1MB in the BIOS. I changed this to 8MB (the maximum) and then the PC rebooted I was able to select a higher resolution. link|flag answered Aug 18 '09 at 5:53 Nick Kavadias Nick, Does this give Aero functionalty ?

  Read the article

• Backlight dimming don't work

  - by Mathias

  My Packard Bell EasyNote TS11HR notebook does not have an option for dimming the display backlight. At night, my eyes begin to hurt because of the strong light from the screen. My laptop is 2-3 months old and I am sure it has worked before. When I click on the battery icon in the notification area, it says in my language (Danish): "the setting for light does possibly reduce the life of the battery". However, I cannot dim the backlight. I have tried downloading programs for dimming the screen but they only make the screen darker, instead of dimming the backlight. I have tried updating my drivers and looking in the BIOS for a setting. I also plan to use an Ubuntu LiveCD to try controlling it. As of now though, the backlight is locked at maximum. Any ideas?

  Read the article

• how to make vhdresizer work on XP Mode VHD files

  - by A_M

  Hi, I'm trying to shrink an Windows 7 XP Mode VHD file with little success. I've been trying to use VhdResizer. When I select my VHD file, it says "VhdExpand only supports fixed and dynamic VHD files". My XP Mode VHDs are dynamic files. Does anyone have any idea why it is failing? Failing that, does anyone have a process which I can use to shrink my XP mode VHD files? Thanks.

  Read the article

• Getting dwl-g122 to work on ubuntu

  - by User1

  I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

  Read the article

• mod_perl custom configuration directives don't work when placed in .htaccess and there is <Location>

  - by al_l_ex

  I'm trying to complete Redmine's feature request #2693: Use Redmine.pm to authenticate for any directory (1). I have not much knowledge on all these things and need help. Redmine uses mod_perl module Redmine.pm for authentication & authorization. This module defines several custom configuration directives. I've successfully modified patch from (1) and it works when all config is in <Location>: <Location /digischrank/test> AuthType basic AuthName "Digischrank Test" Require valid-user PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=SomedaTaBAse;host=localhost" RedmineDbUser "SoMeuSer" RedmineDbPass "SomePaSS" RedmineProject "digischrank" </Location> But when I move one of these directives (RedmineProject, see (1)) in .htaccess file, Redmine.pm doesn't see it! I've tried to change <Location> to <Directory> and add AllowOverride All. Directives from .htaccess is visible, but remaining ones from <Directory> - not. I don't want to move all directives to each .htaccess. When I add <Location> in addition to <Directory>, again - only directives from <Location> are visible. As far as I know, directives should be merged. I miss something?

  Read the article

• DOUBLE_CLIC dont work in actionscript3

  - by ScarX

  I have MyMovie.addEventListener(MouseEvent.CLICK, goClick) function goClick(e:MouseEvent):void { trace("Trololo"); } It's work. Why don't work? MyMovie.addEventListener(MouseEvent.DOUBLE_CLICK, goDouble) function goDouble(e:MouseEvent):void { trace("Trololo"); }

  Read the article

• NFS on top of GFS2 - does it work?

  - by Matthew

  We're currently using a NoSQL derivative called Splunk to receive our data. The software supports something called "search head pooling" in which the job-dispatching engine is housed on several servers which share a common storage point. Originally our intention was to use a clustered filesystem like GFS2 because of low latency, stability, and ease of setup. We set up GFS2, and it's working with no issues. However when trying to run the software, it's trying to create lock files, and a bunch of other things that their support team can't quite explain. Ultimate feedback from them was that they only support NFS. Our network administration team heavily frowns on NFS (lack of stability, file lock issues, etc). So, I was thinking about the possibility of setting up NFS on each server in the cluster to act as a wedge layer between the GFS2 filesystem and the software. Basically configure each server to export the GFS2 filesystem's mountpoint via NFS, and then tell each server to connect to that NFS share. That way we aren't introducing any single-points-of-failure should a dedicated NFS server go down, but the vendor gets their "required" NFS share. I'm just brainstorming ways around, so please tear this apart :)

  Read the article

• Exchange 2007 - Distribution group not work correctly

  - by AlexB

  I have simple server Windows 2008 Standart SP2 with Exchange 2007 with apply SP1. Only one DC and one Exchange server (not exist Edge) in the same server. I have first distribution group by name "[email protected]" with 10 users. Working with internal and external mail correctly. I have second distribution group by name "[email protected]" with 3 users. Working with internal mail correctly, but external mail delivery failed 2 from 3 users. Only 1 users proclaims that external mail delivered correctly. Those 3 users they are too member of distribution group [email protected]" . I am not found in the eventlog any problem with Exchange server. Any user and any distribution group not check the box "Require that all senders are authenticated." Any ideas on how to solve the problem?

  Read the article

• Does nginx auth_basic work over HTTPS?

  - by monde_

  I've been trying to setup a password protected directory in a SSL website as follows: /etc/nginx/sites-available/default server { listen 443: ssl on; ssl_certificate /usr/certs/server.crt; ssl_certificate_key /usr/certs/server.key; server_name server1.example.com; root /var/www/example.com/htdocs/; index index.html; location /secure/ { auth_basic "Restricted"; auth_basic_user_file /var/www/example.com/.htpasswd; } } The problem is when I try to access the URL https://server1.example.com/secure/, I get a "404: Not Found" error page. My error.log shows the following error: 011/11/26 03:09:06 [error] 10913#0: *1 no user/password was provided for basic authentication, client: 192.168.0.24, server: server1.example.com, request: "GET /secure/ HTTP/1.1", host: "server1.example.com" However, I was able to setup password protected directories for a normal HTTP virtual host without any problems. Is it a problem with the config or something else?

  Read the article

• credit or minclass does not work well with pam_cracklib.so in common-password (opeSuSe 11.3)

  - by Mario

  I'm trying to implement password complexities on my pdc. It's a samba PDC with openLDAP backend. I tried cracklib-check but it looks like that I should have a decent and localize version of password library since the library out there usually comes in english. I also have another consideration that we will allow users to use any kind of password - even though it's dictionary based - as long as their passwords integrated with low/upper alphabet, digits, and other characters such as '$' or '_' (pam_cracklib.so calls them as classes). So here is my /etc/pam.d/common-password: #password requisite pam_pwcheck.so nullok cracklib password requisite pam_cracklib.so minclass=4 reject_username ##password requisite pam_cracklib.so \ ## dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1 reject_username password optional pam_gnome_keyring.so use_autht_ok password required pam_unix2.so use_authtok nullok The first commented line (with #) was the default configuration of openSuse 11.3. The 2nd/3rd (with leading ##) is another configuration I use when minclass=4 line is commented out. By the way, I have 'check password script' = /usr/local/sbin/crackcheck -d /usr/share/cracklib/pw_dict and passdb backend = ldapsam:ldap://127.0.0.1 parameters in smb.conf and cracklib-check works fine too. So here is the test I conduct. I logon to windows and then change my password. Sometimes it works fine that it trows error message - which what I wanted, but simple password with only lower alphabets can pass windows change password. Maybe I should make a new library which incorporates local vocabularies, but a guy out there (raise your hand please if you read this :) ) also experienced the same trouble with english word. Besides, what we really want is to let user to choose 2 or 3 format password out of 4 classes. Is there a bug or something with pam module in openSuse 11.3? Thank you in advance. Regards, Mario

  Read the article

• How does the where clause in MySQL work ?

  - by Eternal Learner

  I have a doubt. Assume R and S are 2 relations with attributes A and B respectively . If I have a query Select * From R, S Where R.A = S.B Does this work like a double For Loop in say c or c++ For( i=0; i<n; i++) For( j=0; j<n; j++) if (i == j) //DO some work

  Read the article

• onchange of FilteringSelect do not work

  - by vusan

  Same code I'm using of dojo documentation just downloaded code work fine but onchange event do not fire on my project. I have make it to work by firing onblur onBlur: function(){alert(3)} What thing may cause onchange event not fire? var filteringSelect = new FilteringSelect({ id: "stateSelect", name: "state", value: "CA", store: stateStore, searchAttr: "name", onChange: function(){alert(3)} }, "stateSelect");

  Read the article

• How to uploads to the web work on local networks

  - by Saif Bechan

  Let's say I have two computers hooked up as a home network. They both use the same router, and the router is hooked up to the to the net. Now lets say I am working on computer A, and I can access files on computer B. Computer A has a drive that is mounted on computer A as a network drive. Now I want to upload a file to a website. In the browser of computer A I open a browser, and go the website. On the website I select 'upload file', now in the file browser I go to the network drive, and select a file on computer B to upload. What happens in this case. Is the file uploaded directly from computer B to the website, or is the file first transferred to computer A, and then to the website.

  Read the article

• Tagging does not work with the Subversion plugin.

  - by mark

  I have exactly the same problem as the fellow from this post - http://jenkins.361315.n4.nabble.com/Tag-this-build-not-working-subversion-td384218.html, except that I use build 1.413 Unfortunately, the post does not provide any workarounds except downgrading to 1.310 (from 1.315) I would gladly provide the logs, if I knew the logger names. Please, help. P.S. I have posted this issue both on jenkins issues site - https://issues.jenkins-ci.org/browse/JENKINS-9961 and in the respective google group - https://groups.google.com/d/topic/jenkinsci-users/4UVKFxXA9Jo/overview. To no avail. So, this site is my last hope - thanks to all in advance. EDIT Upgraded to 1.417 - still tagging does nothing.

  Read the article

• Can't get sync with SVN to work to put a directory under version control

  - by Chamster

  I've created a directory on our SVN server and added a local directory with my project to it. It got uploaded and seems to be OK. However, I didn't get those cute green (or any others) icons on the file. So I clicked on the project's directory and used "checkout". That wasn't good because I've downloaded ALL of the repository. How can I synchronize my uploaded directory with it's corresponding directory on the server? (It's probably something easy that I've forgot to check in or so...)

  Read the article

• Pressing 'Enter' doesn't really work in Firefox

  - by inkedmn

  When I'm typing just about anywhere in Firefox on OSX and press enter, it simply doesn't do anything. This includes typing in a textarea element (which should take the cursor to the next line), in a search form (which should submit the form). I'm typing this very question in Firefox right now and I'm unable to advance the cursor to the beginning of the next line. I have no clue what I did to make this happen, but it's kinda driving me insane. This is Firefox 3.6.3 under Mac OS X 10.6. Thanks!

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >