Search Results

Search found 2726 results on 110 pages for 'processor'.

Page 67/110 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• SATA controller installed but not working? (No drives show up/Don't see card's BIOS)

  - by johnnycakes

  Hi, I have an old Promise FastTrak S150 TX4 SATA controller card. I put it in an old machine running Windows Server 2003. I booted the machine. The new hardware was detected. I installed the drivers. So now in Device Manager under "SCSI and RAID Controllers" I see "Win Server 2003 Promise FastTrak S150 TX4 Controller" and "Win Server 2003 Promise RAID Console SCSI Processor Device" I previously had the card in a machine that is now dead. When I booted that machine, during the boot process I would see the card info displayed and the drives that were attached. Boot would finish and my drives would be available. When I boot this new machine I never see that screen/text. No hard drives are available/visible. What am I missing? Thanks.

  Read the article

• New video card? [closed]

  - by TutorialPoint

  I ran into some problems with my ATI Radeon x1200. I want it to support vertex shader 3.0, but it only does 2.0. This is because Call of Duty: Modern Warfare 2 only works with 3.0. So, I want a new video card. Can someone help me, with a more clean look to it? I bet if I would stick to some seller, I would end up with a video card that does not support what I want, or is too expansive. I really do not want it to be above $75, if possible. Some info about my PC: Manufacter: XXODD Processor: AMD Athlon64 X2 DualCore 4000+ 2Ghz (but running currently 32 bit OS) ATI Radeon X1200 video card (the problem) 1 GB RAM DDR2 MS-7367 Motherboard Windows 7 Ultimate OS 32-Bit Build 7600 RTM

  Read the article

• PHP processes run one at a time, always taking 100% of one core

  - by Derek Kurth

  We have seven websites written in PHP running on a Windows 2008 server with IIS 7.5. They are all very slow right now. When I look in Task Manager, I see around 10 php-cgi.exe processes, and they are all taking 0% of the CPU, except one, which is taking 25%. It's a quad-core server, so it's taking 100% of one core. If I watch for a few seconds, the process taking 25% will go to 0%, and a different php-cgi.exe process will jump to 25%. So all the php-cgi.exe processes are just lined up, waiting on a single core, and each process uses 100% of the processor when it can. Each of the 7 sites is in its own application pool in IIS, and we're using FastCGI. The PHP version is 5.3. Any ideas? Thanks!

  Read the article

• Are the new Hewlett-Packard "Sandy Bridge"-based notebooks dispatched globally?

  - by leladax

  I'm currently trying to figure out why a European chain retailer is delaying a dv7 [remaining code number is not same with american]; it is listed in their site for several days and while ordered on Monday they still don't have it in their central storage. In an earlier call I was advised that since Intel announces the processor now it may start dispatching from the 6th. Is that true? Is HP obligated not to dispatch it before the 6th? (normally/legally or as a 'deal between gentlemen'). Does anyone know if HP dispatches normally dv7s now? Did they intentionally not dispatch them to retailers before the CES?

  Read the article

• Ubuntu 12.04 3.2 Kernel showing incorrect "cache size" in cpuinfo?

  - by Tom G

  2x Xeon E5620 . 16 Cores altogether. /proc/cpuinfo shows cache is only @ 4096kb According to intel this should have 12MB of "smart cache". Doing searched for E5620 and CPUinfo shows the correct number: cache size : 12288 KB However mine shows this: processor : 15 v endor_id : GenuineIntel cpu family : 6 model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping : 2 microcode : 0x1 cpu MHz : 2400.104 cache size : 4096 KB fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx bogomips : 4800.20 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual Any idea on why it shows like it's missing 8MB in CPU cache? .

  Read the article

• top process state column under FreeBSD

  - by Eric DANNIELOU

  When running top interactively, I can see various word in the state column : nanslp, biord, select, uwait, lockf, pause, kqread, piperd, sbwait ... Some like nanslp or kqread are self explanatory, others are not. Tried man pages : STATE is the current state (one of "START", "RUN" (shown as "CPUn" on SMP systems), "SLEEP", "STOP", "ZOMB", "WAIT", "LOCK" or the event on which the process waits), C is the processor number on which the process is executing (visible only on SMP systems) Tried search engines : stack overflow mailing lists archives Where may I get a complete list of possible process state under FreeBSD 9, and their meanings?

  Read the article

• Problem identifying which page/page/function locks whole IIS server

  - by fnovak

  Hello, I have problem identifying which page/page/function locks whole IIS server. Out of the blue whole w3wp.exe jumps to CPU 90-98% usage. I have created 3 different application pools to see which w3wp.exe service locks the processor but I am unable to find out this information. I can only see that 2 of 3 services have 0-5% usage and one is jumping around 90-98% after some while. I think some process/function/redirect/sql is doing this but I would like to eliminate it. So far I am not even able to find the source of the problem. On my local development machine with VS2010 everything works like charm and I am unable to replicate problem. The server is windows 2k3 web server, sql server 2k5 and .net 4.0 Thank you for your help, links or any information on this issue. Fero

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Laptop display not working unless DVI cable is plugged in

  - by marien

  I have a Lenovo ThinkPad T420 with an i5 processor and integrated graphics. I dropped the laptop and now the screen is not working. I replaced the screen and it is still not working. It shows the BIOS and then at Windows login the screen gets all static looking. But if I plug in a DVI-to-HDMI cable the laptop starts and works fine. Even the external display works and the laptop display works too. As soon as I unplug the cable the screen crashes and is all static. I cannot figure out the problem. The video works because the external screen still works. How can I fix this?

  Read the article

• Evaluate a vendor laptop before deployment to user?

  - by NetWarrior

  I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

• TOP CPU usage for whole system

  - by heike

  I am using a machine that has using cat /proc/cpuinfo | grep processor | wc -l returning 8 I am trying to load the server using a load generator that I wrote, and capture the behaviour of TOP command for idle (as the software that is tested on server runs on ROOT). Doing the load as an increasing step function, I capture the idle state every second, and see the result. Strange thing is that when I increase the load every 1 minute, the idle state is infact increasing (??). This honestly does not make sense .. I thought with more load, the idle state will decrease, and the cpu usage will increase. Is there any reasonable explanation for this behaviour, maybe for the server utilization itself? Thanks for any feedback -- ok, no idea for the down vote. but I try to find this behaviour a lot, can not find any reasonable things to explain this ..

  Read the article

• video card for only watching videos

  - by Nothing 2 Lose

  I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

  Read the article

• How do you pick what server setup you need?

  - by ed209

  I recently started receiving pubsub data feed from etsy. It averages around 250 notifications per minute. But obviously, when the USA wakes up that spikes quite heavily. I want to be able to deal with those spikes (about 3 per day) but the rest of day is fine. What's the best method of getting the right server configuration. My current approach is to keep upgrading until the server stops dying... next leap is: Processor: AMD Phenom II X6-1055T HEXA Core RAM: 4GB DDR2 SDRAM HD1: SATA Drive (7,200 rpm) (+500 GB 7200 RPM SATA hard drive) HD2: SATA Backup Drive (+500 GB SATA (7,200 rpm)) OS: Linux OS (+CentOS 5 64-bit) Bandwidth: 6000GB Monthly Transfer (3000 in + 3000 out) (+100M uplink port) What's the best approach to working out what sort of server setup you need?

  Read the article

• Is running multiple databases on login going to make my Mac really slow?

  - by Walrus the Cat

  Sometime ago, I installed Postgres, and the Launch agent that causes it to run when I log in. Just now, I did the same thing for Mongo. I was just about to do it for Couch. I don't remember if I ever did it for MySQL, but I probably did. Mongo and Couch are just 'when I have time to look into it' sort of things, but I don't want to have to remember to start them when I do. I have a 2.4 Ghz processor and 8 GB ram. Is this sort of behavior going to significantly impact my computer's performance? Should I be scrambling to uninstall all but the database I'm currently using, or can I install all the things and run them all the time? Thanks

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• Lenovo ThinkServer TS130 1105 - does 32/64 depend on RAM?

  - by Ecnerwal

  Just got in a Lenovo ThinkServer TS130 1105 (Xeon E3-1225V1) and a (new, sealed, holographed, looks legit) copy of Windows Server 2008 32/64 (standard) to run on it for a pretty lightweight job (currently handled, adequately, by a terrifyingly old Optima P4 running Windows 2000 server - really lightweight, but long-past-due for replacement, without any particular need or excuse for server 2012...) The 64 bit disc sits there and does nothing. The 32 bit disc boots. I haven't spotted any mention of this in the TS130 Manual (I have now combed it, and find no mention of a need to populate in pairs - a preferred order to populate in, yes, but no mention of pairs being required) but I begin to wonder if it's due to the fact that the 4GB RAM suppled with it was a single DIMM, rather than a pair. Better for upgrading, but perhaps requiring an upgrade (or sidegrade) right away to install the x64 version?? Anyone know? I tried the 64-bit DVD on a desktop with an AMD Athlon II X4 635 processor which normally runs Windows7 in 64 bit, and it booted up just fine.

  Read the article

• putty ssh client become not responding frequently in windows 7

  - by Sankaran

  with celeron processor and 512 MB ram windows 7 takes too much time even to open a folder in windows explorer. I connect to internet with GPRS modem. When I tried to connect with remote linux machine with putty ssh client. The problem is the putty becomes Not responding in 2 or 3 minutes. I've to connect again and putty goes Not responding again. When i tried in Safe mode with networking, GPRS modem is not even detected. the modem is USB data card. Is it possible load USB drive in safe mode of windows 7 or any other possibility to connect with remote machine via ssh

  Read the article

• Installing additional printer drivers (x86) on Windows 7 (x64)

  - by ambrax

  I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

  Read the article

• Is it possible to run a "Windows Server 2008 R2 SP1 Hyper-V Virtual Machine" on Windows 7x64 Pro machine?

  - by tbone

  Specifically, I want to run this: http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 This download contains a three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. System requirements Supported operating systems: Windows Server 2008 R2 Additionally you will need: •Windows Server 2008 R2 (SP1 recommended) with the Hyper-V role enabled. •Drive Formatting: NTFS •Processor: Intel VT or AMD-V capable •RAM: 8 GB or more recommended •Hard disk space required for install: 100 GB ------------------------- So, the above text seems to indicate that you need a physical Windows 2008 Server (r2) server running, but from the googling I've done on the subject I've yet to come across a discussion that definitively answers the question. Many posts I've read seem to indicate it might be possible to run it on Windows 7 using one of the following: VirtualBox, Windows Virtual PC, VMWare but I'm not entirely sure.

  Read the article

• Keyboard glitches for some when Ctrl key is pressed

  - by user270716

  I'm having some problems with my keyboard, if I press the Ctrl key it glitches for some time. For example, if I press Ctrl and press Tab while it's still glitched the computer shuts down as if i pressed the Power On/Off button. If I press a it "presses" Alt, A and a symbol I can't remember, if I recall correctly it's a currency symbol. If I press Ctrl again it "presses" the ' key. I'm using Windows 8 Single Language 64 bits with a ABNT2 keyboard. The processor is a Intel Celeron G530 with 2 GB of RAM.

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• Laptop hot after format [migrated]

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• why is 64 bits version called AMD64 and 32 bits version called i386?

  - by ajsie

  I have never understood this. This is what i know: 64 bits OS if you want to handle more than 2GB RAM. Else, 32 bits OS. So on Ubuntu's homepage you can download either 64 bits or 32 bits. But the 64 bits is called amd64 and the 32 bits is called i386. So i have to have a AMD processor to run amd64? And intel to run i386? And if someone codes a software (lets say Apache). Does he have to code one 32 bits and one 64 bits? Do some softwares only exist for 32 and not 64 and vice versa? Thanks in advance!

  Read the article

• Compatible case?

  - by Rick

  Hello everyone, first of all, I'm not sure where this question should go. So I've looked around and found the 'hardware' tag used in superuser.com please forgive me if I'm posting this on the wrong site. I'm new to the hardware part of computers. I've been looking around for a few months and now is the time to make my choice. I want to build my own computer and I think I got all the items I need. I want to know if the case and the motherboard I've chosen are compatible or if you could tell me how to check if they're compatible I want to know if they fit. Here's the motherboard/processor/memory package And this* is the case I'd like to fit it in. I'm sure that all the other stuff I might need I have with me already. Thanks in advance -Rick *See my comment, I may not post two hyperlinks due to spam protection

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >