Search Results

Search found 2726 results on 110 pages for 'processor'.

Page 65/110 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Why does the CPU usage reach 100% when laptop is plugged in?

  - by Mayank

  I have an HP Elitebook 8440p with Windows 7 Ultimate, i7 Processor and 8 GB RAM. For the last couple of days, when I plug-in my laptop for charging, the CPU usage shoots up to 100% and remains there for around 15 minutes. No offending process shows up in Task Manager/Process Explorer but the laptop is practically unusable for that time. The CPU usage becomes normal when I remove the power cord but shoots up again when plugged back. This is happening with different power adapters/wall sockets so it might not be a faulty adapter issue. Why is this happening and any pointer to resolve this issue?

  Read the article

• What is the meaining of "deassert" in this context?

  - by Sam.Rueby

  The English majors over at Dell provided me with this error message provided by a PowerEdge 2950. CPU2 Status: Processor sensors for CPU2, IERR was deasserted I've Googled it, random forum posts aren't providing me with a clear answer. It's also apparently not a word: http://dictionary.reference.com/browse/deassert?s=t I can guess the meaning. Assert: to state with assurance, confidence, or force Okay. So the negative of that. The state of lack-of-confidence? What is this error message trying to tell me? Memory errors were grouped with this one: is it trying to say that IERR for CPU2 should be set, but is not? That the current system state is SNAFU but CPU2 sees everything as fine?

  Read the article

• Why does my CPU Usage reach 100% too often?

  - by deathlock

  I'm using a dual-core processor and often see my CPU usage reaches 100%. I realize this may happen if I'm running too much applications, so when I know the computer starts to run slowly, I start to close my applications. I usually run 4-5 applications simultaneously. Usually those are: web browser (Google Chrome), Adobe Photoshop, Notepad++, XAMPP, and Windows Task Manager. Usually I close tabs in my Chrome first, because I often browse the net with about 20 tabs/4 windows open, so I presume that would take much memory (bad habit, I know). But even after closing Chrome's tabs or closing other applications, my CPU Usage often stays at high percentage - 72% at best, 100% at worst. I check the Processes tab on Windows Task Manager and usually found the System, System Idle Process, or services.exe taking the highest CPU process (could reach 60). Why is this happening? And is there any solution? EDIT I have T2250 @ 1,73 Ghz and 2.5 GB RAM

  Read the article

• windows 7 frequently crashes when running 64 bit debian on virtualbox

  - by erin c

  I've been having some hard times with Virtualbox. I use it to run 64-bit Debian guest on a Windows 7 host to be able to code for linux systems. It generally crashes when I build my code in eclipse cdt, or if I am doing some intensive operations. Should I lower the memory and core usage? Is this some sort of virtualbox problem? I upgraded to virtualbox v4.1.8 and the problem still occurs. My virtual machine instance uses 1736MB out of 4GB of ram, and I use 2 out of 8 processor cores. But still, the whole thing crashes 1 or 2 times every single day.

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• How can I compare effective power usage of two CPUs / CPU+Mobo+Mem combinations?

  - by einpoklum

  I have this server which does mostly file sharing (with the associated storage). No serious number crunching and it isn't the firewall. My current box has a Celeron D processor (Prescott 336 2.8 GHz); and I'm considering replacing it with a Pentium D (Smithfield 805 2.66 GHz) - for reasons which do not involve performance. How can I know whether one can expect a higher or lower power consumptipn for the change? And how can I estimate the power consumption for each option?

  Read the article

• Why is Windows Explorer not responding?

  - by William Barnes

  I am having the seemingy popular problem with Widows Explorer not responding. I have tried the AUTRUNS and turned off everything recommended. I have run SCANNOW 3 times and it comes back clean. When booting in safe mode it appears to work. I read someplace that the problem could be a service program, but can't remember where I read it or how to do it. Something about turning off all service programs and then turning them back on one at a time. The problem is I don't remember what it said to do. Any and all help is greatly appreciated. as an FYI here is my system stats Sorry I can't access that part of control panel right now because windows explore not responding. I have an HPdesk top with a AMD quad core processor 1.8GB 1.5TB sata drives (a 1TB and a 500GB) Nvidia 8400 graphics card a 2mb internet connetion wireless 2 DBD R?W drives. Any help is greatly apprciated

  Read the article

• Lesser known Ubuntu desktop applications

  - by becomingGuru

  So, this Ubuntu software center comes with 100s of applications of all types. In this version they have disabled rating, making it hard to find how good it is. I found gnome-shell today, that seemed awesome. There are other ones, less well known, For eg, Abiword is far better than Open Office Org Word processor in many ways. (Altho' I dont like word processors themselves.) What are the other less well known applications that you use and like. One application per answer.

  Read the article

• nfs server on cygwin slow

  - by Weltenwanderer

  The setup: We run an instance of cygwin nfsd on a Windows 2008 Server (Xeon 3,2 GHz). There are several Sun Solaris and SunOS machines accessing the shares. This is the exports file: /disk3 (rw,all_squash) /disk2 (rw,all_squash) Those paths are soft linked to the relevant cygdrive/d/path/to/dir paths. Some of the folders contain up to 10k files. The Problem: ls -la on the mounted folder on the sun boxes takes 2 - 3 minutes and the general read performance is really bad. cat filename displays the file in slow bursts and this hurts performance on tasks that access those shared files heavily. Processor load is not the issue, the nfs server idles most of the time, the cygwin tasks never get over 1% load.

  Read the article

• Setting up 2 external monitors on a laptop with VGA splitter

  - by mike

  I have a laptop with a graphics card that supports 2 displays. I would like to know the easiest way to set it up so I can close my laptop lid and use 2 external monitors (unique displays). I use it primarily for office applications and video and want a quality, clear picture. The laptop has 1 VGA port and I have 2 24" 1920x1200 monitors that have VGA and DVI ports. So a few questions: Can I just use a VGA splitter? (seen mixed feedback on this) Would it a VGA to 2 DVI splitter give a better picture quality? (if it exists) Would I be better upgrading laptop to one with 2 digital ports ( I just see a lot with VGA and HDMI though) specs: Model: Toshiba Satellite C675-S106 (Windows 7) Graphics Card: Intel HD Graphics 3000 (supports 2 displays) Processor: Intel Core i3-2350M

  Read the article

• Is it my motherboard?

  - by jarodrussell

  Early this week my home server (a Linux machine) threw a kernel panic. Yesterday is happened a couple of times. Then all of a sudden, when I plugged a USB stick in to run a memory test, the monitor stopped coming on. Now whenever I turn it on, the system gets power...I heard the drives spin, I see the processor fan spin, and the hard drive light comes on...but nothing happens. I put a video card in the AGP slot, but still nothing. The light on the power button that usually comes on stopped coming on. I took the memory out to see if it would beep, but nothing beeped. It's like it's getting power, but it's not coming on. Does this sound like a motherboard problem to anyone else? I think it is, but a second opinion would be greatly appreciated. Thanks.

  Read the article

• cygwin rsync over ssh very slow

  - by Waleed Hamra

  I have 2 machines running Windows Xp SP3. I have cygwin installed on both, version 1.7. I have rsync and ssh installed on both, and configured using default settings as per ssh-host-config and ssh-user-config programs provided. I moved the public keys into their respective locations, and basically ssh is working fine. i began an rsync operation, using: rsync -av --delete --hard-links local_dir username@other_machine:/some_dir well... on both machines, the processor is running near idle, no heavy usage. I checked IO using process explorer on both machines, and that too is at normal levels (1~2 MB/s), so I can't see where the bottlenecks are, because network performance is aweful. I'm not going over 1MB/s... when a normal file copy using windows sharing achieves some ~10 MB/s.. What could be wrong?

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• How can I simulate a slow machine in a VM?

  - by Nathan Long

  I'm testing an AJAX-heavy web-application. I develop on a new Mac, but I use VmWare Fusion (currently 3.1.2) to test in Windows XP, using IETester to simulate older versions of IE. This lets me see how older IE versions would render the site, but I'd also like to see how the site would perform on an older machine. I see in the VM's settings that I can decrease the RAM; is there a way to also dial down the processor speed? How else might I simulate a slow machine? (I am also going to check out how to simulate a slow internet connection.)

  Read the article

• Creating a custom NAS compatible with the Mac Time machine and for media streaming

  - by Bobby Alexander

  I am planning to assemble a custom NAS machine using an Intel Atom processor. I need the NAS for the following purposes: It should be accessible from by Windows PC so that I can dump data on the NAS (installations, media etc) It should be accessible from my Macbook for the above use. I should be able to use it with the Mac time machine software for backup. The media should be available to my PS3 for streaming. I should be able to access it from my iphone. All the above features should be available over wireless. The time machine feature is very important. Is this even possible? Can someone provide resources on how I can assemble such a machine and setup the required software on it? Much appreciated.

  Read the article

• PC is very slow

  - by Appoos

  Hi All, My Windows XP system is very slow. I tried all possible ways of improving the performance. But now luck. I've 4GB RAM and AMD Phenon XII B53 processor. I don't see any applications consuming CPU resources. But the Page File usage is 4.18 GB(System Managed size in MyComputerPropertiesPeformance). There is enough RAM available, but still why OS is using Page File? How can I improve the Page File usage? Please help me.

  Read the article

• What is the fastest CPU my laptop can support?

  - by Dave

  I have a Dell Latitude D830 laptop and would like to speed up compile times on it. I have confirmed that it is, indeed, the processor time that is the bottleneck. How can I tell what processors are compatible with the motherboard to pick the best available? I run dual boot Ubuntu Maverick and Windows 7. lshw tells me that my motherboard is OHN338 from Dell, Inc. If anyone has a generic solution, i.e. "For motherboard X, here is how you find out what processors are supported," that would be make this question much more useful to future visitors. But if you also know of a way to find out specific to my model, that would be great as well.

  Read the article

• Better Performance with Laptop i5+SSD or i7+HDD [closed]

  - by Cas Sakal

  Possible Duplicates: i5 vs. i7 processor dev laptop Developer Notebook i5 or i7 I could not decide on which configuration below gives better performance for developers on a notebook(running VS.NET, SQL Server, no gaming); (A) i5 540M + SSD (Intel) or (B) i7 720M + 7200 RPM HDD (Western Digital) Since these two configurations(A, B) costs nearly same $ for me, I would like to buy the fastest one for my job environment. Please do not comment just buy this or that, if you can give an inference about your choice I would be appreciated. Thank you, cas

  Read the article

• How do you debug why Windows is slow?

  - by aaron

  I've got Vista Biz and when my machine chugs I think it is because of paging, but I never know how to verify this. Procexp doesn't seem to provide useful information because it appears that nothing is going on when the chugs happen. perfmon seems like it has the counters I need, but I'm never sure what counters I should add to cover the information I want. For perfmon, I prefer numbers that are percents, so I can gauge load. Here are the counters I have up, but they don't always seem to correlate to chugs: - % disk time (logical) - page faults/sec (an indicator of lots of paging activity) - processor/%priviliged time

  Read the article

• Notebook with NVIDIA Optimus not switching video card in games

  - by user140739

  I have a Samsung RC720 notebook with Intel Integrated Graphics and NVIDIA GeForce GT 520M. As you can see it has two video adapters and Optimus is supposed to switch between them. But when I choose dedicated GPU in NVIDIA Control Panel and try to run, for example, GTA IV, it uses integrated graphics and I get very poor performance. I have already installed last NVIDIA and notebook drivers, chose high-performance in NVIDIA Control Panel, tried to execute with "Run with graphics processor..." context option and so on. Thanks for help.

  Read the article

• High load on a nagios server -- How many service checks for a nagios server is too many?

  - by Josh

  I have a nagios server running Ubuntu with a 2.0 GHz Intel Processor, a RAID10 array, and 400 MB of RAM. It monitors a total of 42 services across 8 hosts, most of which are checked using the check_http plugin even 5 minutes, some every minute. Recently the load on the nagios server has been above 4, often as high as 6. The server also runs cacti, gathering statistics every minute for 6 hosts. I wonder, how many services should hardware like this be able to handle? Is the load so high because I am pushing the limits of the hardware, or should this hardware be able to handle 42 service checks plus cacti? If the hardware is inadequate, should I look to add more RAM, more cores, or faster cores? What hardware / service checks are others running?

  Read the article

• Memory limit on PHP + Apache + Windows 32 bit?

  - by thkala

  I am considering using Apache 32-bit for a Moodle installation on a Windows 2008 R2 64-bit/16GB server. Since the available memory affects the number of concurrent of users that can be served, I was wondering how the 2GB memory limit on 32-bit Windows processes affects Apache+PHP. Is it a collective limit for the whole server, or is it applied separately for each Apache child process/thread? If it is separate, how many of those children are launched on Windows? One per request? One per processor core? Something in the middle? Is this somehow configurable?

  Read the article

• How can I install VLC on RHEL 6.3?

  - by holddame

  I'm having a problem installing VLC on Red hat 6.3 When I try to use yum install vlc all goes well until it shows me this in the end: Error: Package: vlc-2.0.3-6.el6.x86_64 (linuxtech-release) Requires: libminizip.so.1()(64bit) Error: Package: liblrdf-0.5.0-2.el6.x86_64 (linuxtech-release) Requires: ladspa Error: Package: libffado-2.1.0-0.8.20120325.svn2088.el6.x86_64 (linuxtech-release) Requires: libconfig++.so.8()(64bit) also I can't use yum update I'm running on a 32-bit processor and I don't know what's wrong. ok I'v installed live555 and tried again nothing really happened here is my yum whatprovides *BasicUsageEnviroment `live555-devel-0-0.34.2012.01.25.el6.x86_64 : Development files for live555.com streaming : libraries Repo : linuxtech-release Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.34.2012.01.25.el6.i686 : Development files for live555.com streaming : libraries Repo : linuxtech-release Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.27.2010.04.09.el6.rf.x86_64 : Development files for live555.com streaming : libraries Repo : rpmforge Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.27.2012.02.04.el6.rf.x86_64 : Development files for live555.com streaming : libraries Repo : rpmforge Matched from: Filename : /usr/include/BasicUsageEnvironment

  Read the article

• laptop suddenly became very slow

  - by Ieyasu Sawada

  I have a compaq laptop. And I've been using it 2 years now. Then this day, it suddenly became very slow. It almost took 5 minutes from turning on to the log on screen. I click my username and it took 3 minutes to show the desktop. I click on my computer then properties to see if it is still showing 2 Ghz for the Core 2 duo processor. And 2gb for the memory. It took 10 minutes for all the information to show up. And its still 2gb and 2Ghz. So I may conclude that this is not a problem in memory or cpu. Its still running perfectly last night. And I have not seen signs of it failing. Things I already tried: Rebooting Shutdown then turn on again So how do I determine what causes this problem? How do I fix it?

  Read the article

• sp_releaseapplock timeout expired cause?

  - by Darian Miller

  I've been using a combination of sp_getapplock and sp_releaseapplock for some custom application locking purposes for years now with success and just the last few days I've started to get some timeout expired errors on a sp_releaseapplock which is a bit puzzling. When listing the current locks, there's less than a dozen of these active, and the rest of the dedicated server is way underutilized at the moment (less than 100 batches/sec with a mutli-processor, 32GB Ram, higher end machine.) Is there a specific resource to be monitored that may point me in the right direction for determing why such a lightweight operation is timing out? This is called within a stored proc with a timeout of 120 seconds which seems to be amazingly long for this operation to timeout on. SQL 2000 SP4 running on Windows 2003 Server. TSQL used (@pLockUniqueName is VarChar(255)) EXEC @pLockSuccess = sp_getapplock @pLockUniqueName, 'Exclusive', 'Session', 0 EXEC @pUnLockSuccess = sp_releaseapplock @pLockUniqueName, 'Session' Thanks, Darian

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >