Search Results

Search found 22456 results on 899 pages for 'computer behavior'.

Page 675/899 | < Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• How to "eject" non-existing USB drive from Windows 7 host?

  - by gencha

  I use a USB key which is encrypted with BitLocker to store various data. I keep that key with me all the time. What happens all the time is that I send my home computer to hibernate without ejecting the USB key first. Then I unplug the key and take it with me to work. When I get home, I resume my Windows session and even though the key is not plugged in, the drive still appears as mounted on the system. I can also unmount the non-existing device with mountvol, but that only removes the drive letter. Windows will still think the device is plugged in. When I plug the key in, nothing happens. The device's class ID is listed in mountvol output, but the device is not listed in the Disk Management panel.

  Read the article

• Empty MacBook Pro, no SuperDrive. How do I install Windows?

  - by MCcz

  My situation is this: HDD1: Empty 180 GB SSD HDD2: Empty 500 GB HDD (instead of SuperDrive) Accessories: Windows 8 ISO 64 Gig USB stick Second computer SuperDrive in USB enclosure What I need: Install Windows 8 on the SSD in the laptop What I tried: Create bootable USB – Doesn't work. Macbook doesnt show me USB as an option after holding OPTION key. Install Windows through SuperDrive connected via USB – Doesn't work. On the internet, there are thousands of articles telling me all kinds of solutions, expecting me to have Mac OS on my laptop. Is there any solution to this?

  Read the article

• Unity no longer loads in 13.04 for main user

  - by user152973

  When Ubuntu starts up, Unity fails to load (I can only see my desktop with no unity sidebar and no system bar in the top right). I tried the advice of Unity does not start in Ubuntu 13.04 which recommended the following commands: dconf reset -f /org/compiz/ unity --reset-icons &disown I ran the commands without errors an restarted the computer, but the problem persists. I am currently running Gnome. I have looked at other pages from the Google search "ubuntu unity failed to load 13.04", but the advice was similar to above and seems to be concerned with a system upgrade in April 18, 2013. I suspect my issue is something far more recent. Please give me advice on how to restore Unity on my account or at least figure out what the problem is. Thank you. Some information that might be relevant: -Unity has worked fine on 13.04 for the 6 months that I've had it until today. (November 10, 2013) -I have set up the update tool to automatically update when available. It is very possible that the system applied some updates without my knowledge. -Interestingly, Unity works fine on the Guest account. -I have made it so the system automatically logs me in at start-up. -This is a personal laptop. No one else has access to it. -I was not doing anything with the system settings or the terminal and have not installed any new software for the past 3 days. -I am running the System76 native Linux laptop Ultra Lemur. I did not contact their support yet because it seemed unlikely that this is a System76-specific error.

  Read the article

• VMware Workstation 7&8&9 does not generate /etc/vmware/network upon installation

  - by dash17291

  When I install VMware Workstation on Arch linux Virtual ethernet is not working. $ sudo tail /var/log/vnetlib Aug 28 22:20:33 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:33 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:33 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:33 VNLNetCfgUnload - Requested cache is not loaded Database file is not present. Failed to initialize Aug 28 22:20:41 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:41 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:41 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:41 VNLNetCfgUnload - Requested cache is not loaded Required modules compiled. Previously I have copied that file or directory (I don't remember) from a working installation, but now I need a real solution. It's strange for me, may be a hardware issue also because with Ubuntu the same thing happens on the same computer.

  Read the article

• TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot

  - by Tibi

  TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot. When i start my laptop (Acer TravelMate 2410). after the starting memory check, the screen goes full black, and a message appears for about 3 seconds: Warning! Password locked: Fixed disk0 and after that, disappears, and next message comes out: Operating System Not Found and all stops here. Windows Xp was installed on it, before this came. TrueCrypt cd (witch was made during the process of full encryption) is not working, not in restoring MBR, no even in decrypting my drive - completely useless. Note: I detected some short of boot sector errors (i dont know the amount) on my drive before this happened. Please, i would greatfully thank every comment, or suggestion, because my computer is unusable now. The HDD is a Samsung HDD, 160Gb. Other preferences: Acer TravelMate 2410 Notebook, 2 Gb RAM, 1500 Mhz Intel Celeron M processor. Regards

  Read the article

• send mail via smtp on debian 6?

  - by acidzombie24

  i followed this tutorial http://library.linode.com/email/exim/send-only-mta-debian-6-squeeze?format=print When i got to the end, i sent the email to [email protected]. I didnt receive it. I didnt get spam either, i got nothing. I also didnt get an error message on the console. How do i properly sent up a smtp server and send an email from it? I'll not i am testing this on my VM on my local computer. My ISP doesnt block any traffic whatsoever (which is one reason why i use them) so... what can i do? i also tried this tutorial

  Read the article

• View changelog of all packages to be upgraded before upgrading

  - by Stein G. Strindhaug

  When using synaptic on my Ubuntu desktop computer i can review all changelog of all the packages to be upgraded, and unselect a package for upgrade if I want. On my desktop I usually install everything, but I like to at least review what the changes are so that I can delay the upgrade if I suspect it could cause problems with the development tools I use. On a server (Ubuntu Server) with no x-server how can I do the same thing on the console: list all packages that will be updated (apt-get --dry-run upgrade does this along with a lot of noisy simulated install messages), view the changelog (if any) from last upgrade to the version it will be upgraded to. select which packages I want to ignore, or which I want to upgrade I've searched a lot for this but I haven't found anything, possibly I'm not using the correct terminology; but surely this must be possible. Synaptic must get it's info from some some low-level tool I assume? Complicated shellscripts are welcome too, if this is not already easily done with the existing tools.

  Read the article

• X58 RAID 10 - Am I forced to use Sata2?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. I contacted my supplier who suggested a gigabyte X58A motherboard and 4 Western Digital Caviar black 6Gb/s disks. I have checked the spec for the X58A board, however, and it says: SATA 3Gb/s: RAID 0, RAID 1, RAID 5, and RAID 10 SATA 6Gb/s: RAID 0, and RAID 1. I'm losing half the bandwidth because I'm forced to use SATA2! What should I do?

  Read the article

• Bug: unable to handle kernel NULL pointer dereference at

  - by maria

  I have recently installed new system on my disc, Ubuntu 12.04. Installation proceeded without problems, I started installing additional software and put data from other discs. I had already two times bug report, it was quite long, and I have no idea how to acces to log file (which probably is somewhere saved) and since I had to switch off the computer using the button, anything else was possible, here is just a small part of it (what I've noted on paper) could not write bytes: Broken pipe speach dicpatcher disabled: edit etc/default/speach-dispatcher saned disabled: edit .... and than: BUG: unable to handle kernel NULL pointer dereference at 0000009c I've run Memory test in GRUB, everything is fine. First time it occured when I was using rsync, second time when I was trying to install texlive. Should I install whole system once again? Or can it be hardware problem? Or something else? If there is any hardware details which may be relevant, please ask, since I have no idea what is happening, I don't know what kind of information could be useful. Thanks P.S. dmesg output:

  Read the article

• Why do VMs need to be "stack machines" or "register machines" etc.?

  - by Prog

  (This is an extremely newbie-ish question). I've been studying a little about Virtual Machines. Turns out a lot of them are designed very similarly to physical or theoretical computers. I read that the JVM for example, is a 'stack machine'. What that means (and correct me if I'm wrong) is that it stores all of it's 'temporary memory' on a stack, and makes operations on this stack for all of it's opcodes. For example, the source code 2 + 3 will be translated to bytecode similar to: push 2 push 3 add My question is this: JVMs are probably written using C/C++ and such. If so, why doesn't the JVM execute the following C code: 2 + 3..? I mean, why does it need a stack, or in other VMs 'registers' - like in a physical computer? The underlying physical CPU takes care of all of this. Why don't VM writers simply execute the interpreted bytecode with 'usual' instructions in the language the VM is programmed with? Why do VMs need to emulate hardware, when the actual hardware already does this for us? Again, very newbie-ish questions. Thanks for your help

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• Is embedded programming closer to electrical engineering or software development?

  - by Jeremy Heiler

  I am being approached with a job for writing embedded C on micro controllers. At first I would have thought that embedding programming is to low on the software stack for me, but maybe I am thinking about it wrong. Normally I would have shrugged off an opportunity to write embedded code, as I don't consider myself an electrical engineer. Is this a bad assumption? Am I able to write interesting and useful software for embedded systems, or will I kick myself for dropping too low on the software stack? I went to school for computer science and really enjoyed writing a compiler, managing concurrent algorithms, designing data structures, and developing frameworks. However, I am currently employed as a Flex developer, which doesn't scream the interesting things I just described. (I currently deal with issues like: "this check box needs to be 4 pixels to the left" and "this date is formatted wrong".) I appreciate everyone's input. I know I have to make the decision for myself, I just would like some clarification on what it means to be a embedded programmer, and if it fits what I find to be interesting.

  Read the article

• facebook keeps freezing Chrome and Windows

  - by missingfaktor

  Hi, everyone. I am a Windows 7 and Chrome user. Lately (since past few months) my Chrome has been freezing, taking down whole operating system with it, leaving resetting the computer the only choice. Recently I discovered that the issue was with facebook tabs, and when I close those tabs (if it's not too late!), I can save Chrome and Windows from a complete crash. This is very annoying. Is there a solution for this problem? Maybe uninstalling/reinstalling some plugins? Please help. Thanks. PS: Let me know if for helping me with this issue you need to know the list of extensions I have installed. I'll provide it in as an addendum.

  Read the article

• How do I set up two existing disks with identical contents as a single mirrored volume in Windows 7 without losing data?

  - by Software Monkey

  I have two data disks that were, heretofore, in a mobo RAID configuration in Windows 7. They are now separate AHCI disks, visible in Computer Management. How to I go about making them a single mirrored volume in Windows? Note: The data is backed up up on two other separate disks, but it's a fair amount of work to do a restore (over 120'000 files, and I have to reset permissions). Note2: Currently the two disks are identical, and I can use the content of either one for this.

  Read the article

• Help w/ error "Account exceeded bandwidth limits" Thunderbird 3 + Gmail

  - by boo

  Over the past two days I have been receiving the following message on a new computer running Windows 7: Account exceeded bandwidth limits. (Failure) Whenever I try to access my emails through Thunderbird, this is followed by: Login to server imap.gmail.com failed. Credentials are correct as I have access via HTTP. And then it requests me to enter my password (I have also unlocked the captcha on this account, but this didn't stop any error messages) I'm looking for a details on why this is happening, to prevent it from reoccurring, such as whether this is specific to something in Thunderbird 3 or google?

  Read the article

• DVI problem with LG L204WT

  - by Holgerwa

  I have a LG L204WT which has VGA and DVI connectors. Until recently, I have used the monitor via VGA, but now I have upgraded the graphics board and switched to DVI. The problem is that each time after the computer starts, the monitor either doesn't show anything (black screen, but doesn't go into standby) or the picture is distorted. I then switch the monitor off and on several times, and at some point it starts correctly and then I can work as usual. This only happens on startup. It is one out of 3 monitors, the other two work fine. It seems to me as if the monitor is not able to synchronize on the DVI signal and either shows a distorted picture or nothing at all. There are no settings in the monitor setup that would change anything. What could be the problem?

  Read the article

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

• Syncing Large Directories/Filesystems using USB Drive [closed]

  - by Alan Lue

  Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

  Read the article

• Execute script before shutting down in Ubuntu

  - by juanefren

  When I shut down my computer I want to show some pending tasks that I have to do before leaving the office... I did a local application to manage those tasks, so basically I just want to run a command, and shut down after I kill the app executed. I have already tried with these options: * /etc/gdm/PostSession/Default -- this works only when I select LogOut option instead Shutdown. * /etc/rc0.d/K01mycustomscript -- execute script after X is killed * $HOME/.bash_logout -- This looks like does nothing. * ./app-to-run && sudo shutdown -h now -- Don't like it for 2 reasons, prompts for sudo password, and can't use my laptop shutdown button. I am using Ubuntu 10.04

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• Sennheiser PC360 Microphone Suddenly Stopped Working

  - by Michaelwm

  Just recently, my Sennheiser PC360's microphone stopped working. Yesterday Night, it was working 100% fine. Muting correctly, un-muting, volume boosting, etc. I woke up this morning, and got into a skype call (After not changing a single setting on my computer), and it wasn't working. I tried mumble, and it didn't work there either. After that, I checked my sound devices and found out it was plugged in, but not responding to my voice. I unplugged the headset, and it correctly showed that it was unplugged. So, a quick run-down: Sennheiser PC360 Headset suddenly stops working after a few hours of sleep. Software is up to date I can hear the mute sound when I raise and lower the microphone arm Windows Sound Device Manager shows that it is plugged in Unplugging the headset correctly shows it is unplugged Windows Sound Device Manager shows that the microphone isn't receiving any input

  Read the article

• Access to local network machine

  - by Jirka Kopriva

  I have granted new setting from my domain provider. Domain with specific port is pointing on computer in local network (fixed ip) like: mydomain.com:87 -> 192.168.1.1 Local machine is running on win server 2008. Everything works fine on local network. But mydomain.com:87 is not working. Are there extra settings for win server to allow connection from outside? (Firewall is turned off while searching for working result.)

  Read the article

• Compaq Presario Laptop Monitor Problems

  - by Nishant

  I am attaching a few pics of my laptop monitor now . Can you please tell me if this is a hardware error which can be rectified by replacing the monitor ? How this happened - I accidently hit my leg on the laptop and jammed it against the wall and ever since the monitor is like this .I plan to replace the Monitor by buying a spare parts laptop that sells in ebay . I wonder if this is a LCD HARDWARE problem or problem with the cable that goes to the monitor . THE OS works fine in the computer .I hope my question is clear . http://img163.imageshack.us/gal.php?g=good1z.jpg

  Read the article

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

< Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >