Search Results

Search found 20513 results on 821 pages for 'form submit'.

Page 675/821 | < Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >

• HP DL160G6 bios update fails

  - by Bojo

  I tried to update the BIOS from my HP DL160G6's. Unfortunately the Windows update degraded my BIOS version from 243 to 237. But when I try to upgrade both servers to version the update fails. First I got a warning like: CMOS Layout difference between System ROM and ROM file has detected. AFU recommand (sic) adding /C commands of your original input commands. Press "A" to accept AFU's recommendation. Press "F" to keep original input commands. And the update did not do anything. But now I get a message like: Reading flash ........ done Bootblock checksum ... ok Module checksums ..... bad Error: BIOS checksum error And the update stops. I tried some commands form this page: http://www.ami.com/support/downloads/txt/AFU_README.TXT But I don't try to much, the servers are still booting. Does anyone know how to update my servers to BIOS version 245? I used this version http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3884344&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_7bd12651ab954fdcb0d7ee164a%257CswEnvOID%253D54%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken and created a bootable USB stick sith HPQUSB.exe

  Read the article

• VLC (Server) re-stream Security Camera Feed

  - by Aaron

  I purchased a Swann Home Security DVR system and was hoping for some help on how to duplicate the streaming video on my server. In order to get their web view (streaming video in the browser) to work, I had to install the following plugins: HiDvrPlugin.dmg for mac. Hidvrocx.cab for Windows. I was originally thinking it was a sign of some form of DRM? Maybe. Maybe not. HTML wise, the following code is in the source of the safari version of the web view: <embed pluginspage="SurveilClient.dmg" width="10px" height="10px" type="application/x-scplugin" id="MacDiv" style="height: 592px; width: 720px; left: 278px; top: 61px; "> It seems to be the main display area. Using wireshark, I am able to see that the video stream is on port 9000. However, I have no idea what type of stream it is. I've tried opening it in VLC with no such luck. http://dvr_ip:9000 tcp://dvr_ip:9000 My hope was to do the following to redistribute the feed vlc dvr_ip:9000 --sout h264-version-on-localhost:3000 TLDR; Trying to re-distribute a stream from a security camera (can't tell the format) using vlc (re-distribute via h.264 / HTML5). Not sure how to accomplish this. Is it possible that the software has some type of DRM that only the plugins can decode?

  Read the article

• IIS 7 returns 304 instead of 200

  - by Ola Herrdahl

  I have a strange issue with IIS 7. Sometimes it seems to return a 304 instead of a 200. Here is a sample request captured with Fiddler: (Note that the file requested is not located in my browsers cache yet.) GET https://[mysite]/Content/js/jquery.form.js HTTP/1.1 Accept: */* Referer: https://[mysite]/Welcome/News Accept-Language: sv-SE User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET4.0C; .NET4.0E) Accept-Encoding: gzip, deflate Host: [mysite] Connection: Keep-Alive Cache-Control: no-cache Cookie: ... Note that there is no If-Modified-Since or If-None-Match in the request. But still the response is: HTTP/1.1 304 Not Modified Cache-Control: public Expires: Tue, 02 Mar 2010 06:26:08 GMT Last-Modified: Mon, 22 Feb 2010 21:58:44 GMT ETag: "1CAB40A337D4200" Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 01 Mar 2010 17:06:34 GMT Does anyone have a clue of what could be wrong here? I'm running IIS 7 on Windows Web Server 2008 R2.

  Read the article

• apache renew ssl not working [on hold]

  - by Varun S

  Downloaded a new ssl cert from go daddy and installed the cert on apache2 server put the cert in /etc/ssl/certs/ folder put the gd_bundle.crt in the /etc/ssl/ folder private key is in /etc/ssl/private/private.key I just replaced the original files with the new files, did not replace the private key. I restarted the server but the website is still showing old certificated date. What am I doing wrong and how do i resolve it ? my httpd.conf file is empty, the certificated config is in the sites-enabled/default-ssl file the server is apache2 running ubuntu 14.04 os SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/2b1f6d308c2f9b.crt SSLCertificateKeyFile /etc/ssl/private/private.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. SSLCertificateChainFile /etc/ssl/gd_bundle.crt -rwxr-xr-x 1 root root 1944 Aug 16 06:34 /etc/ssl/certs/2b1f6d308c2f9b.crt -rwxr-xr-x 1 root root 3197 Aug 16 06:10 /etc/ssl/gd_bundle.crt -rw-r--r-- 1 root root 1679 Oct 3 2013 /etc/ssl/private/private.key /etc/apache2/sites-available/default-ssl: # SSLCertificateFile directive is needed. /etc/apache2/sites-available/default-ssl: SSLCertificateFile /etc/ssl/certs/2b1f6d308c2f9b.crt /etc/apache2/sites-available/default-ssl: SSLCertificateKeyFile /etc/ssl/private/private.key /etc/apache2/sites-available/default-ssl: # Point SSLCertificateChainFile at a file containing the /etc/apache2/sites-available/default-ssl: # the referenced file can be the same as SSLCertificateFile /etc/apache2/sites-available/default-ssl: SSLCertificateChainFile /etc/ssl/gd_bundle.crt /etc/apache2/sites-enabled/default-ssl: # SSLCertificateFile directive is needed. /etc/apache2/sites-enabled/default-ssl: SSLCertificateFile /etc/ssl/certs/2b1f6d308c2f9b.crt /etc/apache2/sites-enabled/default-ssl: SSLCertificateKeyFile /etc/ssl/private/private.key /etc/apache2/sites-enabled/default-ssl: # Point SSLCertificateChainFile at a file containing the /etc/apache2/sites-enabled/default-ssl: # the referenced file can be the same as SSLCertificateFile /etc/apache2/sites-enabled/default-ssl: SSLCertificateChainFile /etc/ssl/gd_bundle.crt

  Read the article

• bonding module parameters are not shown in /sys/module/bonding/parameters/

  - by c4f4t0r

  I have a server with Suse 11 sp1 kernel 2.6.32.54-0.3-default, with modinfo bonding i see all parameters, but under /sys/module/bonding/parameters/ not modinfo bonding | grep ^parm parm: max_bonds:Max number of bonded devices (int) parm: num_grat_arp:Number of gratuitous ARP packets to send on failover event (int) parm: num_unsol_na:Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event (int) parm: miimon:Link check interval in milliseconds (int) parm: updelay:Delay before considering link up, in milliseconds (int) parm: downdelay:Delay before considering link down, in milliseconds (int) parm: use_carrier:Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default) (int) parm: mode:Mode of operation : 0 for balance-rr, 1 for active-backup, 2 for balance-xor, 3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, 6 for balance-alb (charp) parm: primary:Primary network device to use (charp) parm: lacp_rate:LACPDU tx rate to request from 802.3ad partner (slow/fast) (charp) parm: ad_select:803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2) (charp) parm: xmit_hash_policy:XOR hashing method: 0 for layer 2 (default), 1 for layer 3+4 (charp) parm: arp_interval:arp interval in milliseconds (int) parm: arp_ip_target:arp targets in n.n.n.n form (array of charp) parm: arp_validate:validate src/dst of ARP probes: none (default), active, backup or all (charp) parm: fail_over_mac:For active-backup, do not set all slaves to the same MAC. none (default), active or follow (charp) in /sys/module/bonding/parameters ls -l /sys/module/bonding/parameters/ total 0 -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_grat_arp -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_unsol_na I found some of this parameters under /sys/class/net/bond0/bonding/, but when i try to change one i got the following error echo layer2+3 > /sys/class/net/bond0/bonding/xmit_hash_policy -bash: echo: write error: Operation not permitted

  Read the article

• Stange stream of HTTP GET requests in apache logs, from amazon ec2 instances

  - by Alexandre Boeglin

  I just had a look at my apache logs, and I see a lot of very similar requests: GET / HTTP/1.1 User-Agent: curl/7.24.0 (i386-redhat-linux-gnu) libcurl/7.24.0 \ NSS/3.13.5.0 zlib/1.2.5 libidn/1.18 libssh2/1.2.2 Host: [my_domain].org Accept: */* there's a steady stream of those, about 2 or 3 per minute; they all request the same domain and resource (there are slight variations in user agent version numbers); they come form a lot of different IPv4 and IPv6 addresses, in blocs that belong to amazon ec2 (in Singapore, Japan, Ireland and the USA). I tried to look for an explanation online, or even just similar stories, but couldn't find any. Has anyone got a clue as to what this is? It doesn't look malicious per say, but it's just annoying me, and I couldn't find any more information about it. I first suspected it could be a bot checking if my server is still up, but: I don't remember subscribing to such a service; why would it need to check my site twice every minute; why doesn't it use a clearly identifying fqdn. Or, should I send this question to amazon, via their abuse contact? Thanks!

  Read the article

• Centos CMake Does Not Install Using gcc 4.7.2

  - by Devin Dixon

  A similar problem has been reported here with no solution:https://www.centos.org/modules/newbb/print.php?form=1&topic_id=42696&forum=56&order=ASC&start=0 I've added and upgraded gcc to centos cd /etc/yum.repos.d wget http://people.centos.org/tru/devtools-1.1/devtools-1.1.repo yum --enablerepo=testing-1.1-devtools-6 install devtoolset-1.1-gcc devtoolset-1.1-gcc-c++ scl enable devtoolset-1.1 bash The result is this for my gcc [root@hhvm-build-centos cmake-2.8.11.1]# gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --prefix=/opt/centos/devtoolset-1.1/root/usr --mandir=/opt/centos/devtoolset-1.1/root/usr/share/man --infodir=/opt/centos/devtoolset-1.1/root/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --disable-build-with-cxx --disable-build-poststage1-with-cxx --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,fortran,lto --enable-plugin --with-linker-hash-style=gnu --enable-initfini-array --disable-libgcj --with-ppl --with-cloog --with-mpc=/home/centos/rpm/BUILD/gcc-4.7.2-20121015/obj-x86_64-redhat-linux/mpc-install --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 4.7.2 20121015 (Red Hat 4.7.2-5) (GCC) And I tried to then install cmake through http://www.cmake.org/cmake/resources/software.html#latest But I keep running into this error: Linking CXX executable ../bin/ccmake /opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/ld: CMakeFiles/ccmake.dir/CursesDialog/cmCursesMainForm.cxx.o: undefined reference to symbol 'keypad' /opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/ld: note: 'keypad' is defined in DSO /lib64/libtinfo.so.5 so try adding it to the linker command line /lib64/libtinfo.so.5: could not read symbols: Invalid operation collect2: error: ld returned 1 exit status gmake[2]: *** [bin/ccmake] Error 1 gmake[1]: *** [Source/CMakeFiles/ccmake.dir/all] Error 2 gmake: *** [all] Error 2 The problem seems to come from the new gcc installed because it works with the default install. Is there a solution to this problem?

  Read the article

• How to use cyg-wrapper to fork a new tab in win32 gvim

  - by Peter Nore

  I would like to set up an alias in my cygwin .bashrc that translates pathnames unix-to-dos and passes them to windows gvim in a new tab of an existing instance. I am trying to use Luc Hermitte's cyg-wrapper script for running native win32 applications from Cygwin as per this vim tip. Luc's example of how to use his script is: alias vi= 'cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim63/gvim.exe" --binary-opt=-c,--cmd,-T,-t,--servername,--remote-send,--remote-expr' I do not understand this example because most of these vim parameters (-c,--cmd,--servername,--remote-send,--remote-expr, etc) require more information, and I have not found any example of how to supply the additional information to cyg-wrapper.sh. For example, calling C:/Progra~1/Edition/vim/vim63/gvim.exe --servername=GVIM --remote-tab-silent file1 & will open file1 in a new tab of existing (or non existing) instance GVIM, but calling gvim --servername accomplishes nothing on its own. Unfortunately, though, the corresponding cyg-wrapper phrase does not work: cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim63/gvim.exe" --binary-opt=--servername=GVIM,--remote-tab-silent --fork=2 file1 If ran twice, this actually opens up two instances of gvim; it is as if the servername 'GVIM' is being stripped and ignored. How do you supply a servername to gvim --servername or a .vimrc to gvim -u using cyg-wrapper.sh? Furthermore, why is it that programs must be passed to cyg-wrapper.sh in the relatively obscure "mixed form?" For example, if I try cyg-wrapper.sh "/cygdrive/c/path/to/GVimPortable.exe" --binary-opt=--servername=GVIM,--remote-tab-silent --fork=2 I get "Invalid switch - "/cygdrive"." See also: getting-gvim-to-automatically-translate-a-cygwin-path alias-to-open-gvim-cream-version-from-cygwin-shell

  Read the article

• How to construct SELinux rules for a Glassfish server

  - by tronda

  I'm running Glassfish 3.1 on a CentOS 6 solution and by default SELinux is enabled. I have installed Sun's JDK version 1.6.0_29 on the server and extracted the Glassfish 3.1.1 to /opt/glassfish-3.1.1 with a link /opt/glassfish pointing to the latest Glassfish version. I've also created a system user named glassfish with a home directory /home/glassfish. When running with SELinux enabled I get all sorts of errors. For instance I'm not able to create the domain. I kind of like the concept of SELinux, and would like to be able to have SELinux enabled. I have the following requirements for the Glassfish server: Listening to port 8080 and 8081 Other ports 7676: JMS 8686: JMX monitoring, 4848: Admin console Forwarding from apache to Glassfish through mod_jk and port 8009 Starting OpenMQ as an separate process which listens to 7676 and it's JMX monitoring port 7776 Able to read and write files at a specified area (different from home directory) Able to use /tmp/ for temporary files I am aware of the audit2allow tool when running in permissive mode, but I struggle with understanding the rules that is generated from this tool, and thought that setting up these rule manually the first time would help me understand the SELinux rules better than the simplistic examples that I've seen so far. Can someone with SELinux experience help me form these SELinux rules with comments describing each part of the rules?

  Read the article

• Ubuntu software stack to mimic Active Directory auth

  - by WickedGrey

  I'm going to have an Ubuntu 11.10 box in a customer's data center running a custom webapp. The customer will not have ssh access to the box, but will need authentication and authorization to access the webapp. The customer needs to have the option of either pointing the webapp at something that we've installed locally on the machine, or to use an Active Directory server that they have. I plan on using a standard "users belong to groups; groups have sets of permissions; the webapp requires certain permissions to respond" auth setup. What software stack can I install locally that will allow an easy switch to and from an Active Directory server, while keeping the configuration as simple as possible (both for me and the end customer)? I would like to use as much off-the-shelf software for this as possible; I do not want to be in the business of keeping user passwords secure. I could see handling the user/group/permission relationships myself if there is not a good out-of-the-box solution (but that seems highly unlikely). I will accept answers in the form of links to "here is what you need" pages, but not "here is what Kerberos does" unless that page also tells me if it's required for my use case (essentially, I know that AD can speak Kerberos, but I can't tell if I need it to, or if I can just use LDAP, or...).

  Read the article

• Uploadify Flash Uploader and Random UPLOAD_ERR_CANT_WRITE errors

  - by dcneiner

  I am using Uploadify to provide progress bar support for file uploads on a PHP app I built. It works perfectly for a few uploads,then every few uploads it fails and the data from the $_FILES array reveals an UPLOAD_ERR_CANT_WRITE error. (Error code 7). I ran Paros proxy between my browser and the server to see the difference between a passing and failing request. The only difference was the content separator for the multi-part post which changes every time. I would conclude this was fully a server error, except with a plain jane form, I cannot reproduce the error. I am not a server guy, so please let me know what information is needed to troubleshoot this and I will update the question with those details. I did place these lines in the .htaccess, but to know avail. The site is hosted on Rackspace Cloudsites so my configuration options are limited: <IfModule mod_security.c> SecFilterEngine Off SecFilterScanPOST Off </IfModule> php_value upload_max_filesize 10M php_value post_max_size 10M php_value max_execution_time 200 php_value max_input_time 200

  Read the article

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• 3d Studio Max and 2+CPUs - Core limit ?

  - by FreekOne

  Hi guys, I am scouting for parts to put in a new machine, and in the process, while looking at different benchmarks I stumbled upon this benchmark and it got me a bit worried. Quote form it: Noticably absent from this review is an old-time favorite, 3ds Max. I did attempt to run our custom 3ds Max benchmark on both the 2009 and 2010 versions of the software, but the application would simply not load on the Westmere box with hyper-threading enabled. Evidently Autodesk didn't plan far enough ahead to write their software for more than 16 threads. Once there is an update that addresses this issue, I will happily add 3ds Max back into the benchmarking mix. Since I was looking at dual hexa-core Xeons (x5650), that would put my future machine at 24 logical cores which (duh) is well over 16 cores and since I'm mostly building this for 3DS Max work, you can see how this would seriously spoil my plans. I tried looking for additional information on this potential issue, but the above article seems to be the only one who mentions it. Could anyone who has access to a 16 core machine or an in-depth knowledge about 3DS Max please confirm this ? Any help would be much appreciated !

  Read the article

• Remote Desktop to Server 2008R2 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• Web server with static IP from cable provider

  - by Dmitri

  I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

  Read the article

• HAProxy + NodeJS gets stuck on TCP Retransmission

  - by sled

  I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

  Read the article

• Creating fillable, saveable PDF in OpenOffice.org results in garbage

  - by Ubuntourist

  I've been creating beautiful fillable PDFs using OOo Writer under Ubuntu for a few years. However, I've recently been asked to make them saveable rather than just printable. So, I go to my colleague's Windows computer which has Adobe Acrobat Professional 8, and following directions outlined in Save filled form in PDF file in Ubuntu. I end up with an unreadable, unfillable document. Acrobat Reader opens it, but it's garbage. It looks like it might be a character encoding issue. The document was created using Arial under Ubuntu. I installed OOo on the Windows box and changed the font to Tahoma. But with either font, the resulting file is a jumble of boxes and oddly placed random characters. Given that it fails with a fairly ubiquitous font, and a Microsoft specific font, I'm guessing it's not a font issue. Until I enable the rights, the PDF is readable both with Acrobat Reader and Acrobat Pro. Anyone else encounter the problem? If so, did you solve it? Thanks.

  Read the article

• data is not posted in $_POST variable using AJAX [migrated]

  - by Oliver

  Im having a problem in one of my script. Server is running in php, and im using AJAX to post data. Here is my script. PHP script: 0){ echo "Search Result :"; for ($x=0;$xProject Name:   ".mysql_result($result,$x,"projname").""; echo "APMS ID:   ".mysql_result($result,$x,"apmsid").""; echo "Prefix/es:   ".mysql_result($result,$x,"projprefix").""; echo "Usage Type:   ".mysql_result($result,$x,"usagetype").""; echo "Rate:   ".mysql_result($result,$x,"projrate").""; echo "Offer Details:   ".mysql_result($result,$x,"offerdetails").""; } }else{ echo "No results found ..."; } }else{ echo "Problems encountered while processing the data ..."; } ? JS Script: function QueryPrefix() { var xmlhttp; var pStr = document.getElementById('Editbox2'); var htmlHolder = document.getElementById('Html1'); var butStr = document.getElementById('Button1'); if (pStr.value.length == 0){ alert("Please enter a value on the box provided!"); return; } pStr.value=""; if (window.XMLHttpRequest) {// code for IE7+, Firefox, Chrome, Opera, Safari xmlhttp=new XMLHttpRequest(); } else {// code for IE6, IE5 xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.onreadystatechange=function() { if (xmlhttp.readyState==4) { htmlHolder.innerHTML=xmlhttp.responseText; butStr.disabled=false; } } butStr.disabled=true; xmlhttp.open("POST","searchutype.php",false); xmlhttp.setRequestHeader("Content-type","application/x-www-form-urlencoded"); xmlhttp.send("pStr=" + pStr.value); }

  Read the article

• Any ideas out there as to how the data can be recovered from an SSD?

  - by ben

  A friend had some form of catastrophic failure on an HP mini 1000, unbootable. Of course there was data that wasn't backed up. I've removed the SSD and hooked it up to a ZIF 40 enclosure but can not seem to get the drive to be recognized in Windows 7. In Disk Management it displays as present, but uninitialized. Attempting to initialize it presents an error Virtual Disk Manager - "The device is not ready". There is scant information on MIE (the custom OS), so I'm not even sure what kind of file system I'm dealing with. In any case, if the filesystem is indeed some flavor other than FAT or NTFS, is this error consistent with that? Are there any creative ideas out there as to how the data can be recovered? Update: Thanks for all the suggestions! I hadn't even considered running a live cd. Unfortunately no luck with Ubuntu (live cd) or explore2fs. The zif connection seems ok (color coded green led for proper connect, orange for not). The drive can't be initialized and therefore can't be formatted, so I guess there may be some real damage. Probably needs to head to a specialist. Thanks again for the feedback, much appreciated.

  Read the article

• How do you add a domain name to a VPS?

  - by jasonaburton

  Hi all, I have a VPS with allgamer.net (I use it to play minecraft). I also have a domain name with networksolutions.com What I want to do is attach that domain name to the VPS. I want to run a wiki on my domain name. If this is possible I can avoid buying another hosting plan just for the wiki. How do I go about doing this? I have very little knowledge in server administration so any advice you guys have is greatly appreciated! I'm pretty sure I have to change the DNS in my domain name to the DNS for my VPS, but on allgamer.net's interface there is no discernable place to find out what I need to change it to. Is there a way to find out the DNS via SSH on my VPS? As well, when I first got my VPS with allgamer.net I filled out a form for it with all my information, but they also wanted a domain name along with it. I gave them the domain name I currently own, but for some reason, it's like it's not connected to the VPS, like if I go to mydomain.com there's nothing, as well, if I use mydomain.com for my minecraft server, it also doesn't work. It's as if it's serving no purpose by being "attached" to my VPS. Any insights into this? Thanks for any help you guys can give me.

  Read the article

• How do I keep a table up to date across 4 db's to be used in SQL Replication Filtering?

  - by Refracted Paladin

  I have a Win Form, Data Entry, application that uses 4 seperate Data Bases. This is an occasionally connected app that uses Merge Replication (SQL 2005) to stay in Sync. This is working just fine. The next hurdle I am trying to tackle is adding Filters to my Publications. Right now we are replicating 70mbs, compressed, to each of our 150 subscribers when, truthfully, they only need a tiny fraction of that. Using Filters I am able to accomplish this(see code below) but I had to make a mapping table in order to do so. This mapping table consists of 3 columns. A PrimaryID(Guid), WorkerName(varchar), and ClientID(int). The problem is I need this table present in all FOUR Databases in order to use it for the filter since, to my knowledge, views or cross-db query's are not allowed in a Filter Statement. What are my options? Seems like I would set it up to be maintained in 1 Database and then use Triggers to keep it updated in the other 3 Databases. In order to be a part of the Filter I have to include that table in the Replication Set so how do I flag it appropriately. Is there a better way, altogether? SELECT <published_columns> FROM [dbo].[tblPlan] WHERE [ClientID] IN (select ClientID from [dbo].[tblWorkerOwnership] where WorkerID = SUSER_SNAME()) Which allows you to chain together Filters, this next one is below the first one so it only pulls from the first's Filtered Set. SELECT <published_columns> FROM [dbo].[tblPlan] INNER JOIN [dbo].[tblHealthAssessmentReview] ON [tblPlan].[PlanID] = [tblHealthAssessmentReview].[PlanID] P.S. - I know how illogical the DB structure sounds. I didn't make it. I inherited it and was then told to make it a "disconnected app."

  Read the article

• Ubuntu 12.4 compiz - disable all compiz plugin - empty screen

  - by gotqn

  A friend of mine has installed on my new machine Ubuntu 10.4 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

  Read the article

• How can I view the binary contents of a file natively in Windows 7? (Is it possible.)

  - by Shannon Severance

  I have a file, a little bigger than 500MB, that is causing some problems. I believe the issue is in the end of line (EOL) convention used. I would like to look at the file in its uninterpreted raw form (1) to confirm the EOL convention of the file. How can I view the "binary" of a file using something built in to Windows 7? I would prefer to avoid having to download anything additional. (1) My coworker and I opened the file in text editors, and they show the lines as one would expect. But both text editors will open files with different EOL conventions and interpret them automagically. (TextEdit and Emacs 24.2. For Emacs I had created a second file with just the first 4K bytes using head -c4096 on a linux box and opened that from my windows box. I attempted to use hexl-mode in Emacs, but when I went to hexl-mode and back to text-mode, the contents of the buffer had changed, adding a visible ^M to the end of each line, so I'm not trusting that at the moment. I believe the issue may be in the end of line character(s) used. The editors my coworker and I tried (1) just automagically recognized the end of line convention and showed us lines. And based on other evidence I believe the EOL convention is carriage return only. (2) return only. are able to recognize and To know what is actually in the file, I would like to look at the binary contents of the file, or at least a couple thousand bytes of the file, preferablely in Hex, though I could work with decimal or octal. Just ones an zeros would be pretty rough to look at.

  Read the article

• PHP/Linux File Permissions

  - by user1733435

  May I ask a question about file permission. I set up Ubuntu server where Apache got running. I have simple php upload form and able to upload file to /var/www/site/uploads as follows. sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 1736 drwxrwxrwx 2 www-data www-data 4096 Oct 18 02:53 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 00:42 ../ -rw-r--r-- 1 www-data www-data 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 www-data www-data 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 www-data www-data 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg Is there anyway to upload files and they show up as -rw-r--r-- 1 sandbox sandbox 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg so that I could straight away feed them to waiting/running shell script. Right now waiting script(move,checksums,rename,resize,etc) unable to do anything to uploaded files with attributes of www-data. If I just do as local account, such as sandbox@sandbox-virtual-machine:/var/www/site/uploads$touch testfile then the script is able to run as I would like to. Any suggestion would be grateful,thanks in advance as well. Thanks for everyone giving help to me,that I was able to progress. Now I am close to getting solved and append the output sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 388 drwxrwxrwx 2 www-data www-data 4096 Oct 18 04:22 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 04:17 ../ -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 04:21 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 219808 Oct 18 04:20 adafruit_pi.png -rw-rw-r-- 1 sandbox sandbox 0 Oct 18 04:22 test How may I set permission to uploaded files like 'test' only w difference in middle group. Such as adafruit_pi.png Vs test. Which statement shall I insert to php code,please?

  Read the article

• How to Move SMS from iPhone to Mac?

  - by seda16

  SMS is the main form to Communicate with others, you would saved many messages on your iPhone. Well, there're many reasons you need to backup your iPhone sms to the Mac. For example, your family or friends have sent you some important and you want to save them on your iPhone in case you delete them by accident, or you just need to backup your sms for other use. So today let's talk about how to move sms from iPhone to Mac. It would be very easy if you use an app to help you, I always use the iPhone to Mac transfer on Amacsoft to copy sms from iPhone to Mac. Now let me tell you how to use this great app: Step 1:Connect iPhone to Mac First of all, you need to install and launch the iPhone to Mac transfer, then connect your iPhone to Mac. The iPhone to Mac transfer would recognise your iPhone automatically. And all information of your iPhone will be shown on an interface. Step 2:Select sms and Start the Export Now you can see many choice on the left, find "SMS" and click it, all sms on your iPhone will be listed on the right. Select and check those you want to move, then just click "Export" on the top to start the transfer. Wait just a few a minute the transfer will be done. Great! You have finish the transfer now, it's really very easy, right? I believe it won't be a problem if you want to transfer your sms from iPhone to Mac. By the way you can also use this Amacsoft iPhone to Mac transfer to move other kind of files , like photos, songs etc. If you're a windows user, you can use iPhone to PC transfer on this web to move sms from iPhone to your PC just with the same steps, good luck!

  Read the article

< Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >