Search Results

Search found 21 results on 1 pages for 'santhosha'.

Page 1/1 | 1 

  • Log off from Remote Desktop Session does not closing Session, showing the login screen again on Wind

    - by Santhosha
    Hi As per requirement we have written one custom GINA. I have observed one interesting behavior in Windows XP 32 Bit(SP2). Customized GINA internally calls windows default Windows GINA(msgina.dll) and shows one extra window as per our requirement. I used to do remote desktop to XP machine from my machine. After replacing Windows GINA with customized GINA I tried to log off from the XP Machine(I am Using Remote Desktop Connection to log in), Log off completes successfully(After showing saving your settings, Closing network connections etc) and I will get log in screen which we get during log on, this is not expected comapred to other flavors of Windows OD. Where as in other operating systems such as Windows XP 64 Bit/ Windows 2003 32/64 Bit even after replacing the Windows Gina with custom GINA remote desktop session closes after log off from the machine. I have tried installing Novell GINA on Windows XP 32 Bit but i have not find any issue with that. I have Tried upgrading XP SP2 to SP3, still i am facing the same issue. Whether anyone faced Such issues when worked with Windows GINA? Thanks in advance Santhosha K S

    Read the article

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • Issue configuring Oracle database for SSL

    - by Santhosha Kaldambe
    Hello, I want to setup Oracle for SSL communication. I am not using SSL authentication for database user. As first requirement, generated self signed certificate using OpenSSL and added certificate to wallet. The wallet location is specified in server configuration. Created listener and it is starting however it does not provide any service. The default listener (non SSL) is working fine. When I execute LSNRCTL.EXE status SSLLISTENER it gives below output. STATUS of the LISTENER Alias SSLLISTENER Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production Start Date 14-NOV-2009 01:47:08 Uptime 16 days 22 hr. 14 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora Listener Log File c:\app\administrator\diag\tnslsnr\\ssllistener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT =2484))) The listener supports no services The command completed successfully Here is exact content of various files after configuration. 1) File Name: tnsnames.ora ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) 2) File Name: sqlnet.ora SSL_VERSION = 0 NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) sqlnet.authentication_services= (NONE) tcp.validnode_checking = no tcp.invited_nodes=(PS0803.oraebs.com,PS2948,PS5098) SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) 3) File Name: listener.ora SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) ) SSLLISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = )(PORT = 2484)) ) Thanks Santhosh

    Read the article

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • Raid 11 : how to stop @ how to release devices

    - by santhosha
    #cat /proc/mdstat md7 : active raid10 sdh1[2] 286743936 blocks 64K chunks 2 near-copies [4/1] [__U_] [0:0:3:0] #mdadm -f /dev/md7 /dev/sdh1 mdadm: set /dev/sdh1 faulty in /dev/md7 #mdadm -r /dev/md7 /dev/sdh1 mdadm: hot remove failed for /dev/sdh1: Device or resource busy # umount /dev/md7 umount: /dev/md7: not mounted #mdadm --stop /dev/md7 mdadm: fail to stop array /dev/md7: Device or resource busy #cat /proc/mdstat md7 : active raid10 sdh1[2] 286743936 blocks 64K chunks 2 near-copies [4/1] [__U_] [0:0:3:0]

    Read the article

  • Filtering in Cisco Unified Communications Manager using AXL programming

    - by Santhosha Kaldambe
    Hi, I want to implement a Application which gets values from CUCM resource. I am currently using the AXL snippet <firstname>FirstNameFilter</firstname><lastname>LastNameFilter</lastname> This will work as & between two filters. for example my filter is FirstNameFilter = sam* LastNameFilter = joy* this will return the entries which satisfies both the filters. But i want to filter in such a way that we need to or this filter like i need to get the users with First Name is sam* or last name = joy*. Whether anyone did such AXL programming? It will be very helpful if i get the answer for this! Thanks Santhosh

    Read the article

  • Secure communication between Oracle client and server

    - by Santhosha Kaldambe
    As per project requirement i need to to secure communication between Oracle server and client. I have oracle version 11g. What are the configuration steps i need to follow in the client and server side for attaining secure communication What if i want to do this secure communication using Programming. What is the syntax i need to follow?

    Read the article

  • GetUserDefaultLocaleName() API is crashing

    - by Santhosha
    I have one application which reads user default locale in Windows Vista and above. When i tried calling the API for getting User default Locale API is crashing. Below is the code, It will be helpfull if any points the reason #include <iostream> #include <WinNls.h> #include <Windows.h> int main() { LPWSTR lpLocaleName=NULL; cout << "Calling GetUserDefaultLocaleName"; int ret = GetUserDefaultLocaleName(lpLocaleName, LOCALE_NAME_MAX_LENGTH); cout << lpLocaleName<<endl; }

    Read the article

  • Issue configuring Oracle database for SSL

    - by Santhosha
    Hello, I want to setup Oracle for SSL communication. I am not using SSL authentication for database user. As first requirement, generated self signed certificate using OpenSSL and added certificate to wallet. The wallet location is specified in server configuration. Created listener and it is starting however it does not provide any service. The default listener (non SSL) is working fine. When I execute LSNRCTL.EXE status SSLLISTENER it gives below output. STATUS of the LISTENER Alias SSLLISTENER Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production Start Date 14-NOV-2009 01:47:08 Uptime 16 days 22 hr. 14 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora Listener Log File c:\app\administrator\diag\tnslsnr\\ssllistener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT =2484))) The listener supports no services The command completed successfully Here is exact content of various files after configuration. 1) File Name: tnsnames.ora ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) 2) File Name: sqlnet.ora SSL_VERSION = 0 NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) sqlnet.authentication_services= (NONE) tcp.validnode_checking = no tcp.invited_nodes=(PS0803.oraebs.com,PS2948,PS5098) SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) 3) File Name: listener.ora S SL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) ) SSLLISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = )(PORT = 2484)) ) Thanks Santhosh

    Read the article

  • SQL Queries for Creating a rollback point and to rollback to that specific point

    - by Santhosha
    Hi, As per my project requirement i want to perform two operation Password Change Unlock Account(Only unlocking account, no password change!) I want return success only if both the transactions succeeds. Say if password change succeeds and unlock fails i cannot send success or failure. So i want to create a rollback point before password change, if both queries executes successfully i will commit the transaction. If one of the query fails i will discard the changes by rolling back to the rollback point. I am doing this in C++ using ADO. Is there any SQL Queries,using i can create the rollback point and reverting to rollback point and commiting the transaction I am using below commands for Password change ALTER LOGIN [username] WITH PASSWORD = N'password' for Unlock account ALTER LOGIN [%s] WITH CHECK_POLICY = OFF ALTER LOGIN [%s] WITH CHECK_POLICY = ON Thanks in advance!! Santhosh

    Read the article

  • Dividing a string into substring in JAVA

    - by Santhosha
    Hi, As per my project I need to devide a string into two parts. below is the example: String searchFilter = "(first=sam*)(last=joy*)"; Where searchFilter is a string. I want to split above string to two parts first=sam* and last=joy* so that i can again split this variables into first,sam*,last and joy* as per my requirement. I dont have much hands on experience in java. Can anyone help me to achieve this one. It will be very helpfull. Thanks in advance

    Read the article

  • Restore Mysql database query is not working in ASP.NET, C#

    - by santhosha
    We are using Mysql.exe to restore database by the following query string cmd ="-h" + ViewState["host"].ToString() + " " + "-u" + ViewState["user"].ToString() + " " + "-p" + ViewState["password"].ToString() + " " + ViewState["dbName"].ToString() + "<" + " " + Server.MapPath("BackupFiles/") + path; The same query is executing in MySql command prompt but we are not able to restore using the above query in VisualStudio .Net, we have tried MysqlImport.exe to do the restore but it was no use. we are newbie to MySql if any help would be appreciated.

    Read the article

1