Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 676/791 | < Previous Page | 672 673 674 675 676 677 678 679 680 681 682 683  | Next Page >

  • linux keeps disconnecting from wireless network

    - by Matteo Ceccarello
    I'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally. How can I solve this problem? EDIT: I've tried to connect manually following the steps iwlist wlan0 scan wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf dhcpcd wlan0 and it works, I can ping google. However, looking to wpa supplicant output I see that it keeps connecting and disconnecting. I'm using WPA2, and this seems to be a problem in authentication. EDIT 2: as pointed out in the answers I forgot to mention my hardware/software specifications: kernel: Linux 3.0-ARCH wireless card: # lspci | grep -i net 07:00.0 Network controller: Intel Corporation WiFi Link 5100 module used # lsmod | grep -i 80211 mac80211 216021 1 iwlagn I use a Netgear DGN1000 modem/router My dmseg output is shown here http://pastebin.com/8Tf7iage

    Read the article

  • Can Vista Windows Explorer be repaired/fixed?

    - by gurun8
    I'm running Windows Vista Home Premium on a Sony Vaio laptop. I think somehow my Windows Explorer has become corrupted. I don't recall any certain inciting incident like installing an unreputable 3rd party app or hardware failure but just recently my system won't wake after it's been left idle longer that 20 minutes and goes to sleep. I've also had problems launch certain apps, like Adobe InDesign CS3, that just basically freeze the system but leave mouse movements functioning for a short time before freezing the entire system which requires a hard reboot to resolve the freeze. The system seems to run normally when used but I fear there's a looming possibility that this is a house of cards and will all come crashing down soon. My question is this, can Windows Explorer be repaired/fixed? Before reformatting the system and starting over, which is most likely what I'm going to be forced to do, I'd like explore (no pun intended) my options in fixing the problem with a patch or reinstall or something of that nature. Reformatting my system will eat up a day or two of my time and I just don't have the time to spare right now.

    Read the article

  • windows xp blue screen dumping physical memory

    - by dotnet-practitioner
    I get following blue screen after running my laptop for an hour... A problem has been detected and windows has been shut down to prevent damange to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as cashing or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and the select safe mode. Technical Information: * STOP 0x0000008E (0xc0000005, 0x805B03F5, 0xF703DC7C, 0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact you system administrator or technical support group for further assistance. so.... if this is a faulty memory.... from where I could buy RAM for following laptop.... TOSHIBA SATELLITE A45-S250 My local Frys store does not carry memory for this laptop.

    Read the article

  • How do i set up a fully featured small business network?

    - by JoshReedSchramm
    This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

    Read the article

  • Cisco ASA 5510 Time of Day Based Policing

    - by minamhere
    I have a Cisco ASA 5510 setup at a boarding school. I determined that many (most?) of the students were downloading files, watching movies, etc, during the day and this was causing the academic side of our network to suffer. The students should not even be in their rooms during the day, so I configured the ASA to police their network segment and limit their outbound bandwidth. This resolved all of our academic issues, and everyone was happy. Except the resident students. I have been asked to change/remove the policing policy at the end of the day, to allow the residents access to the unused bandwidth at night. There's no reason to let bandwidth sit unused at night just because it would be abused during the day. Is there a way to setup Time of Day based Policies on the ASA? Ideally I'd like to be able to open up the network at night and all day during weekends. If I can't set Time based policies, is is possible to schedule the ASA to load a set of commands at a specific time? I suppose I could just setup a scheduled task on one of our servers to log in and make the changes with a simple script, but this seems like a hack, and I'm hoping there is a better or more standard way to accomplish this. Thanks. Edit: If there is a totally different solution that would accomplish a similar goal, I'd be interested in that as well. Free/Cheap would be ideal, but if a separate internet connection is my only other option, it might be worth fighting for money for hardware or software to do this better or more efficiently.

    Read the article

  • Cisco ASA user authentication options - OpenID, public RSA sig, others?

    - by Ryan
    My organization has a Cisco ASA 5510 which I have made act as a firewall/gateway for one of our offices. Most resources a remote user would come looking for exist inside. I've implemented the usual deal - basic inside networks with outbound NAT, one primary outside interface with some secondary public IPs in the PAT pool for public-facing services, a couple site-to-site IPSec links to other branches, etc. - and I'm working now on VPN. I have the WebVPN (clientless SSL VPN) working and even traversing the site-to-site links. At the moment I'm leaving a legacy OpenVPN AS in place for thick client VPN. What I would like to do is standardize on an authentication method for all VPN then switch to the Cisco's IPSec thick VPN server. I'm trying to figure out what's really possible for authentication for these VPN users (thick client and clientless). My organization uses Google Apps and we already use dotnetopenauth to authenticate users for a couple internal services. I'd like to be able to do the same thing for thin and thick VPN. Alternatively a signature-based solution using RSA public keypairs (ssh-keygen type) would be useful to identify user@hardware. I'm trying to get away from legacy username/password auth especially if it's internal to the Cisco (just another password set to manage and for users to forget). I know I can map against an existing LDAP server but we have LDAP accounts created for only about 10% of the user base (mostly developers for Linux shell access). I guess what I'm looking for is a piece of middleware which appears to the Cisco as an LDAP server but will interface with the user's existing OpenID identity. Nothing I've seen in the Cisco suggests it can do this natively. But RSA public keys would be a runner-up, and much much better than standalone or even LDAP auth. What's really practical here?

    Read the article

  • Adding Netem Filter Rules

    - by fontsix
    iam new in programming and using linux. My Question is, is it possible to add Netem Filter Rules later ? I want to create an PHP-Interface for Netem and I don't know how much filters were required. This should be some kind of dynamically. In Example : A user with a static IP starts an Netem Command (Latency) with PHP Interface this means these five command werde executed by php in the first step $classid = 11; $handle = 10; "sudo tc qdisc add dev eth0 handle 1: root htb"; "sudo tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbps"; "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; Now, if there would be a second user who wants to use Netem independent of the first user, i only want to execute the last 3 commands, like "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; There is an Algorithmus for increasing variables $classid and $handle. This should work. Now my Question: Is it possible only to add these 3 commands to add a new class with new qdisc and a new filter rule ? Or how can i realize it ? The Apache Error_log tells me "sh: line 1: flowid: command not found" but i can't find any mistake. I hope you could help Best regards fontsix

    Read the article

  • Fully FOSS EMail solution

    - by Ravi
    I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

    Read the article

  • Asus MyCinema U3100mini Choppy

    - by dsimcha
    I'm running an Asus MyCinema U3100mini ATSC on Windows 7 64-bit. When I play live TV in Windows Media Center, it's very choppy and uses 500+ MB of RAM, I'm guessing due to the hard drive buffering functionality. Is there any way to disable the live TV pause buffer completely? If not, can anyone recommend alternative software that: Works with the MyCinema. Is lightweight and not horribly bloated with features I'll never use like Windows Media Center is. Edits: This is a dual boot system. I've discovered that the tuner actually works fine on XP. It also works fine on my other computer, which has slower hardware and also runs Windows 7 64-bit. The problem actually seems to be with playback at large screen sizes, not with hard drive buffering. Everything works fine below a certain window size and fails for large windows or full screens. Also, the same thing seems to happen whether playing live or recorded TV. As far as the obvious stuff goes, I have the latest video drivers from ATI for my Radeon x1050.

    Read the article

  • X.org - mouse gets stuck on press

    - by grawity
    I'm using Arch Linux. Very often, when I click on something, the OS thing sees the mouse press but not the release. If it was a link or file I clicked, moving the cursor would drag it too. Hammering the same mouse button again gives no effect. Usually, if I tap the touchpad (ALPS), the system finally sees both press and release of that, and I can continue working. (This might be because it uses a different driver - synaptics instead of evdev.) As you can imagine, this is quite annoying even for someone who spends 70% of his life in front of a terminal app. This is not a mouse issue - I'm on a laptop, and this affects both the Trackpoint thing and an external USB mouse. This is not a DE or window manager issue - I have used GNOME (with Metacity, Compiz and Xfwm4), Xfce (with Metacity and Xfwm4), mwm, twm, awesome, and wmii. Doesn't seem to be a hardware thing - after rebooting into Windows XP, everything works fine. hal is used for the auto-configuration of devices (as I have to disconnect the USB mouse often), so Xorg.conf really has nothing of relevance. Xorg -version shows: X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 If it changes anything, the laptop is stone-age Dell Latitude C840. I kinda suspect either hal or the evdev thing to cause it, but I really have no ideas on what to check further. In other words, HALP!#$ This thing is driving me nuts.

    Read the article

  • No apparent reason for high load average

    - by Oz.
    We have several web servers running on Amazon (ec2) c1.xlarge, over Amazon AMI. The servers are duplicates of each other, running the exact same hardware and software. Each server spec is: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge A couple of weeks ago we have run a yum upgrade on one of the servers. Starting on this upgrade the upgraded server started showing a high load average. Needless to say, we did not update the other servers and we can not do so until we understand the reason for this behavior. The strange thing is that when we compare the servers using top or iostat, we can not find the reason for the high load. Note that we have moved traffic from the "problematic" server to the others, which have made the "problematic" server less crowded in terms of requests, and still his load is higher. Do you have any idea what could it be, or where else can we check? Many thanks for the help! Oz. # # proper server # w command # 00:42:26 up 2 days, 19:54, 2 users, load average: 0.41, 0.48, 0.49 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT pts/1 82.80.137.29 00:28 14:05 0.01s 0.01s -bash pts/2 82.80.137.29 00:38 0.00s 0.02s 0.00s w # # proper server # iostat command # Linux 3.2.12-3.2.4.amzn1.x86_64 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 9.03 0.02 4.26 0.17 0.13 86.39 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn xvdap1 1.63 1.50 55.00 367236 13444008 xvdfp1 4.41 45.93 70.48 11227226 17228552 xvdfp2 2.61 2.01 59.81 491890 14620104 xvdfp3 8.16 14.47 94.23 3536522 23034376 xvdfp4 0.98 0.79 45.86 192818 11209784 # # problematic server # w command # 00:43:26 up 2 days, 21:52, 2 users, load average: 1.35, 1.10, 1.17 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT pts/0 82.80.137.29 00:28 15:04 0.02s 0.02s -bash pts/1 82.80.137.29 00:38 0.00s 0.05s 0.00s w # # problematic server # iostat command # Linux 3.2.20-1.29.6.amzn1.x86_64 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 7.97 0.04 3.43 0.19 0.07 88.30 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn xvdap1 2.10 1.49 76.54 374660 19253592 xvdfp1 5.64 40.98 85.92 10308946 21612112 xvdfp2 3.97 4.32 93.18 1087090 23439488 xvdfp3 10.87 30.30 115.14 7622474 28961720 xvdfp4 1.12 0.28 65.54 71034 16487112

    Read the article

  • Update BIOS on Sun Fire X4150 server

    - by Massimo
    I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

    Read the article

  • VPN Client solution

    - by realtek
    I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

    Read the article

  • Virtual machines with failover setup

    - by kimmmo
    We have three servers and our plan is to run a number of virtual machines on them in such manner, that if one of the nodes blow up, we can either quickly or seamlessly get a spare running on another node. In addition to the normal networking, they're interconnected via dual 10Gbit NIC's, so networked raid/mirroring shouldn't be a problem. The guest VM's are mostly going to be running text mode linux, but of course it wouldn't hurt to be able to spin up a non-mission critical windows guest for running Visual Studio or checking IE compatibility of a web app. We've spent some time trying to get some magical cloud setup running using Stackops and Crowbar but it started to look like they were offering way too much and were too complicated for our needs. The next candidate, I think, is Ubuntu 11.04 server + KVM + Ganeti + Drbd, unless you can come up with a suggestion for a better solution that we have missed. Requirements: Installation should be simple or at least understandable without being in the dev team A browser interface for creating and managing VM's is a nice bonus Single node's hardware failure should cause minimal downtime for VM's that were running on that node Adding more nodes should be possible without shutting down the VM's.

    Read the article

  • What is the best way/Software to manage multiple short lived instances of virtual machines ?

    - by Newtopian
    Hi, We have a QA department that have to test our software on multiple combination of OS and DMBS. With Windows spewing out many different versions the combinatorial math of all this can be daunting. So we decided on visualizing our setups but so far it only displaces the problem. The cost of hardware is expensive and we need many different combination far exceeding your server capacity to deliver. Also, these instances are throw away, once the test is complete we no longer need it, furthermore to ensure proper test isolation we should start fresh from a new instance. Lastly we only need a small subset of these system online at any given time. What I am looking for is a way to manage inventory so that our QA staff can order instances to be put online as required and discarded once used. Instances are spawned from a pool of freshly installed systems with the appropriate combination ready to accept our software. It also should be possible for two or more people to start the same instance at the same time, though we could manage without this if it proves too complex to put in place. Finally our budget is pretty thin, we can probably make some purchases but ideally expenditures should be kept to a minimum. To summarize we should be able to : Bring instances online on demand. Ideally should offer queue and scheduling management Destroy instances on demand Keep masters in inventory but not online. Manage large inventory of VMs (30-100 maybe more) with small staff of users (5-10). Allow adding, deleting and changing instances from inventory (bring online, make changes and check back in, or create new and check in). Allow few long lived instances for support tools (normal VM server usage) Thanks for your answers

    Read the article

  • Pros and Cons of a proxy/gateway server

    - by Curtis
    I'm working with a web app that uses two machines, a BSD server and a Windows 2000 server. When someone goes to our website, they are connected to the BSD server which, using Apache's proxy module, relays the requests & responses between them and the web server on the Windows server. The idea (designed and deployed about 9 years ago) was that it was more secure to have the BSD server as what outside people connected to than the Windows server running the web app. The BSD server is a bare bones install with all unnecessary services & applications removed. These servers are about to be replaced and the big question is, is a cut-down, barebones server necessary for security in this setup. From my research online I don’t see anyone else running a setup like this (I don't see anyone questioning it at least.) If they have a server between the user and the web app server(s), it is caching, compressing, and/or load balancing. Is there anything I’m overlooking by letting people connect directly from the internet ** to a Windows 2008 R2 server that’s running the web application? ** there’s a good hardware firewall between the internet with only minimal ports open Thank you.

    Read the article

  • Postfix spool on ext3 optimiziations in >=linux-2.6.34 days

    - by Luke404
    Given the very specific nature of the subject (we're not talking about mailboxes, just the spool; we're not talking about other filesystems, just ext3; and so on...) and the maturity of the softwares involved (linux kernel, ext3fs, postfix) I'd think there should be a more or less agreed on set of best practices to filesystem related tuning. I'm trying to get a roundup of them: data=journal became the default in recent kernels (somewhere around 2.6.30 IIRC) so we should be ok with that Wietse Venema says atime must be on, but Postfix documentation recommendsnoatime while talking about the Incoming Queue. Does that mean that postfix needs atime on just for some queue directories and will benefit from noatime on the others? can we use noatime if we just don't use ETRN? filesystem can be mounted nodev,noexec,nosuid - no* won't prevent you from setting attributes (postfix uses exec attr) they just won't have any effect (we don't run anything from the spool) the fsync() issue cited by Wietse and/or the chattr -S are probably linked to sync/async options of ext3fs but I do not understand them enough. Mouting the filesystem with async option is equivalent to chattr -R -S the whole fs? Seems like it will increase performance, but will that pose a risk of "loss of mail after a system crash" or is it really "safe on /var/spool/postfix" ? would you tune anything else on postfix-2.6.x to work better on ext3 or do you leave defaults everywhere? is there a "best" linux I/O scheduler for this kind of workload (namely CFQ or deadline?) or that's something that will vary too much based on hardware configuration? would you tune anything else in the filesystem or in the kernel? anything else? References: Postfix Performance here on SF Postfix documentation about the Incoming Queue Wietse Venema in Best file system on [email protected] here Postfix and ext3 on [email protected] here and there

    Read the article

  • ASP.NET Session State SQL Server 2008 R2 Freezes with High CPU Usage

    - by jtseng
    Our ASP.Net website uses SQL Server as the session state provider. We currently host the database on SQL Server 2005 since it does not play well on 2008 R2. We would like to know why, and how to fix it. hardware setup Our current session state server has SQL Server 2005 with the files hosted on a single local disk. It is one of our oldest servers since it has served us well, and we never felt the need to upgrade it. The database is about 2 GB holding 6000 sessions. (The sessions are a little big, but we need it.) We have another server with SQL Server 2008 R2 with a much faster CPU, much more RAM, and a much faster hard disk. situation One day, we have a huge surge in traffic. The transaction log growth on SQL Server freezes the server for 10's of seconds, allowing only a few requests through in minutes. So we load up the new server with ASPState with very large data and log files and point all of our applications to the new server. It chugs along fine for about 5 minutes, and then the CPU usage jumps up to 50% of the 16 cores that Standard Edition can use and freezes for 10's of seconds at a time. The files do not record any autogrowth events. The disk queue is nice and low. RAM usage is low. CPU usage on our old server has never been higher than 5%. What happened on the new server? Alternatively, I would like to hear success stories with ASP.NET session state server running on SQL Server 2008 R2 with an average write load of 30MB/sec with bursts up to 200MB/sec.

    Read the article

  • Different approaches to share files over local network & playlists "collaboration"

    - by exTyn
    I know, that I can use Google to find methods to share files over local network [1]. But, I have never shared files over local network, and I want to do this in a good, professional way. Also, this could be a good community wiki, I think. Well, what I am asking for, is: what are pros and cons of different methods to sharing files ofver local network? In my case, I need to share files between Linux & Win 7, and I want it to be secure (= without access for anyone else but me & people in my room). Another question (connected with above topic) is about playing music over the local network. Let's say, I live with 2 other guys in a room, one of us have speakers and we want to collaborate in creating playlists (e.g. everyone is choosing 3 songs to be played). Is it possible? How to do this? I am asking this question on SuperUser, because it (question) is connected with hardware & software (network, connecting computers, software for managing playlists in network etc.). I think it is most accurate place for such question (I have considered SO and SF). [1] And I have already done this! But, I do not have an experience in this field (sharing files over local network), do I am asking about pros and cons.

    Read the article

  • MSSQL error: consistency-based I/O error - can it be caused by an MSSQL or OS problem?

    - by Philipp Keller
    This is what I saw in the windows error log: SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x19fedd20; actual: 0x19fed5e3). It occurred during a read of page (1:1764) in database ID 6 at offset 0x00000000dc8000 in file 'D:\mssql\local_repository_pbdiffimport.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I ran dbcc checkdb which told me I should restore with option REPAIR_ALLOW_DATA_LOSS, so I eventually ran DBCC CHECKDB (my_db_name, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS But that resulted in about 2'000 rows being lost. I restored a backup but now I'm afraid this will happen again since we already had a consistency problem in the same database about 2 weeks ago but then it happened in an index (recreated indexes solved the problem). We have investigated the discs - RAID5 looks good, no errors, and also none of the disc-check-utilities have revealed any hardware problem. Can this be caused by OS (Windows Server 2003) or by MSSQL (MSSQL Server 2005)?

    Read the article

  • Multiple static WAN IP addresses to single LAN subnet

    - by Jessy Houle
    Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

    Read the article

  • Monospace font which supports at least both of Korean hangul and the Georgian alphabet?

    - by hippietrail
    Being both a language enthusiast and a programmer, I find myself often doing programming or text processing involving foreign language alphabets and scripts. One annoyance however is that CJK fonts (those which support Chinese, Japanese, and/or Korean) usually only contain glyphs for Latin, Greek, and Cyrillic at best. Often the Asian glyphs will be beautiful but the other glyphs can be quite ugly. Just as often in text editors you can only choose a single font, not one for CJKV and one for other, which will be each used for rendering the appropriate characters. Korean is one of the languages I'm most interested in currently. I only need hangul / hangeul for monospaced editing, hanja isn't common enough to be a problem. Another of the languages I'm currently involved in is Georgian, which has its own alphabet which is a little exotic but has pretty good support in common fonts on Windows and *nix. But I am as yet unable to find a font with good Korean glyphs and also Georgian glyphs. My editor of choice is gVim, so an answer telling me how to set it to use two fonts together would be just as good. Currently I'm using it mostly under Windows 7 so a vim-specific solution would be needed rather than a *nix-specific solution.

    Read the article

  • USB Device Not Recognized

    - by Franky Chanyau
    Ok this one gets a little bit complicated but bare with me :D A client brought her computer in to be fixed about a week ago, she says she tried charging a new phone she bought from china and immediately after her usb keyboard and mouse stopped working (typical). I had a quick look at it but because I did not have time, I did a simple system restore and it seemed as if the issue was fixed. I promptly sent it back to her but a few days back she called saying that the issue has returned. Turns out the computer was riddled with some virus that also corrupted her XP install so I had to format the whole thing(yes I tried repairing). I hoped that the format would fix the keyboard and mouse issue but the whole thing has escalated and the computer will throw the "USB Device not recognized" error when I plug anything into the many usb ports it has. I have installed all the drivers (including the chip set drivers) for the pc and even tried the unplugging from the power for a while trick, still no luck. I am sure it is not a hardware issue, but may be wrong. This is way over my head. Can anyone help? Computer: HP Compaq DC7100, Intel Pentium 4, 512mb RAM OS: Windows XP Professional SP2

    Read the article

  • Convert a cassette tape recording to digital format

    - by Optimal Solutions
    Has anyone been successful with transferring audio cassette tape recordings to a digital format? I would like to preserve old cassette tape recordings of my grandparents to some digital format: MP3, WAV, etc... The quality of the tapes are mediocre. I think I can handle the quality restoration but getting the audio from tape to digital is my question. Below is a list of the hardware that I can work with: Cassette Deck: I have a Technics stereo cassette deck model RS-B12. It has separate left and right IN and OUT RCA type jacks on the back. In the front it has a headphone phono jack, plus left and right mic input phono jacks. On the computer side: -I have a Windows Vista PC with no additional software other than what came with the machine from Costco. No sound editing software that I can see. There is no sound card on the PC. On the front panel there is a mini-phono mic input jack and there are several different types of in/out mini-phono jacks on the back. In addition, USB and Firewire. I also have access to a new (2009) iMac with a mini-phono input jack for a powered mic or other audio source and GarageBand that has come with the computer. In addition, USB and Firewire. What are my options for getting these cassette recordings into a digital format? Whats the best format? What sort of wires would I need and will I want to utilize the USB or Firewire or can I simply use the audio inputs on the PC (or Mac) to receive the audio stream?

    Read the article

  • Finding useful crash-information in Windows 8 Consumer Preview

    - by Lukas Knuth
    I'm currently diving into C# and wanted to play around with the new Metro-styled-applications introduced with Windows 8, so I updated my Windows 7 to Windows 8 Consumer Preview. The problem I'm facing right now is, that the system freezes after 3-5 minutes. It does not take any input from the keyboard or mouse and it does not recover (at least not in less then 10 minutes). Since I have a background in Linux, I'd like to find some information about the cause of the freeze, but I have no idea where to search. I checked the system-logs (under "System Control" - "Management") but they only record that the system was shut down unexpectedly (doe to the face that I held down the power-button to reboot the PC). There is no useful crash-information in there. I don't want to spend hours on randomly reinstalling drivers and doing things that "might help". Isn't there any place I can find some useful information about the freeze? Before you ask: I installed Windows 8 as an updated on my old Windows 7 installation (which worked fine by the way). My hardware fits the minimum requirements (specs can be found here, the MacMini 3,1 model with 2GHz processor). I have updated the graphics-card drivers to the newest Windows 8 drivers from nVidia.

    Read the article

< Previous Page | 672 673 674 675 676 677 678 679 680 681 682 683  | Next Page >