Search Results

Search found 26517 results on 1061 pages for 'large directory'.

Page 68/1061 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Long 'pause' after copying large files on windows 2008

  - by Ian

  I have a mystery regarding pauses after file copies on windows server 2088 (and other releases) When copying large files, like vhds, to locally attached USB disks I often see a long pause after the copy has completed 100%. As an example: robocopying vhd files. The bytes read/written count matches the vhd file size and robocopy shows 100% but it pauses for several minutes. If I do nothing it will continue, but I will have to wait for quite some time - about the same amount of time as it took to get to 100%. The bytes read/bytes written counters for robocopy do not change. My first thought was that the AV had to scan it, but I'm looking at a machine right now which doesn't have an AV installed and this is occurring, so impossible. No other processes are showing read/write byte counts as going up. The behavior is the same if I use the copy command or xcopy. I've seen this on other systems but have never worked out what the cause is. Anyone got any suggestions as to what might be going on?

  Read the article

• iptables, blocking large numbers of IP Addresses

  - by Twirrim

  I'm looking to block IP addresses in a relatively automated fashion if they look to be 'screen scraping' content from websites that we host. In the past this was achieved by some ingenious perl scripts and OpenBSD's pf. pf is great in that you can provide it nice tables of IP addresses and it will efficiently handle blocking based on them. However for various reasons (before my time) they made the decision to switch to CentOS. iptables doesn't natively provide the ability to block large numbers of addresses (I'm told it wasn't unusual to be blocking 5000+), and I'm a bit cautious over adding that many rules into an iptable. ipt_recent would be awesome for doing this, plus it provides a lot of flexibility for just severely slowing down access, but there is a bug in the CentOS kernel that is stopping me from using it (reported, but awaiting fix). Using ipset would entail compiling a more up-to-date version of iptables than comes with CentOS which whilst I'm perfectly capable of doing it, I'd rather not do from a patching, security and consistency perspective. Other than those two it looks like nfblock is a reasonable alternative. Is anyone aware of other ways of achieving this? Are my concerns about several thousand IP addresses in iptables as individual rules unfounded?

  Read the article

• Optimizing Apache for large file serving

  - by D_Guy13

  I have a random problem with Apache that I can't quite figure out, here is my setup, Windows Server 2008 R2, 64 Bit, 5GB RAM, SSD with 200 MB(Read/write) and Dual Core CPU @ 2.1 GHz A dump from mod-staus, Server Version: Apache/2.4.7 (Win32) mod_limitipconn/0.24 mod_antiloris/0.5.2 PHP/5.5.9 Server MPM: WinNT Apache Lounge VC11 Server Built: Nov 21 2013 20:13:01 Current Time: Thursday, 21-Aug-2014 23:38:06 W. Europe Daylight Time Restart Time: Thursday, 21-Aug-2014 20:30:47 W. Europe Daylight Time Parent Server Config. Generation: 1 Parent Server MPM Generation: 1 Server uptime: 3 hours 7 minutes 18 seconds Server load: -1.00 -1.00 -1.00 Total accesses: 283025 - Total Traffic: 1172.2 GB 25.2 requests/sec - 106.8 MB/second - 4.2 MB/request 62 requests currently being processed, 388 idle workers Serving large .zip & iso files using mod_xsendfile. (File size range 500 MB - 1.5 GB) The setup works and is running fine. CPU usage is very unstable, jumps all the time between 10% - 90% and the servers goes down when it hits 100%. In that case I have to hard restart the server. Server it outputting traffic at 30 Mbps. Is there anything else I should think about to get a more stable CPU usage? Is that CPU usage normal? Can switching to Linux help me achieve better CPU usage?

  Read the article

• Maintenance window and recovery for a large database

  - by NYSystemsAnalyst

  One of our teams is developing a database that will be somewhat large (~500GB) and grow from there (I know 500 Gigs may seem small to many of you, but it will be one of the larger databases in our shop). One of the issues they are grappling with is backing up and restoring the database. Basically, the database will have several "data" tables and one table used for storing images / documents. We need to accomplish the following: Be able to quickly backup and restore only the data tables (sans images) to our test server for debugging and testing purposes. In the event of a catastrophic database failure, restore the data tables only to get most of the application up and running ASAP. Then, restore the images table when possible. Backup the database within the allotted nightly time window (a few hours). My questions are: Is it possible to accomplish the first two goals while still having the images stored in the same database? If so, would we use filegroups, filestream, or something else? How do other shops backup their databases in a reasonable time window while maintaining high availability? Do you replicate to a second server and backup from there?

  Read the article

• Mysql InnoDB and quickly applying large updates

  - by Tim

  Basically my problem is that I have a large table of about 17,000,000 products that I need to apply a bunch of updates to really quickly. The table has 30 columns with the id set as int(10) AUTO_INCREMENT. I have another table which all of the updates for this table are stored in, these updates have to be pre-calculated as they take a couple of days to calculate. This table is in the format of [ product_id int(10), update_value int(10) ]. The strategy I'm taking to issue these 17 million updates quickly is to load all of these updates into memory in a ruby script and group them in a hash of arrays so that each update_value is a key and each array is a list of sorted product_id's. { 150: => [1,2,3,4,5,6], 160: => [7,8,9,10] } Updates are then issued in the format of UPDATE product SET update_value = 150 WHERE product_id IN (1,2,3,4,5,6); UPDATE product SET update_value = 160 WHERE product_id IN (7,8,9,10); I'm pretty sure I'm doing this correctly in the sense that issuing the updates on sorted batches of product_id's should be the optimal way to do it with mysql / innodb. I'm hitting a weird issue though where when I was testing with updating ~13 million records, this only took around 45 minutes. Now I'm testing with more data, ~17 million records and the updates are taking closer to 120 minutes. I would have expected some sort of speed decrease here but not to the degree that I'm seeing. Any advice on how I can speed this up or what could be slowing me down with this larger record set? As far as server specs go they're pretty good, heaps of memory / cpu, the whole DB should fit into memory with plenty of room to grow.

  Read the article

• Potential impact of large broadcast domains

  - by john

  I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

  Read the article

• Are there alternatives to Sysinternals ADInsight?

  - by mmcglynn

  I had been using ADInsight from Sysinternals to trace Active Directory calls from my workstation, but the application has failed. Where previously the Active Directory events were traced and logged, now the window remains blank, whether the application is in capture mode or not. I have run as Administrator, rebooted, downloaded a new version; none of those actions has returned the program to a functional state. The Sysinternals forums don't offer much hope, since this tool is known to fail often. Is there tool that has similar functionality? Questions Does the tool fail when run from another workstation with your account? Yes Does it fail from your (and/or) another workstation using someone else's account? Yes Is there anything in the event log of your workstation? No

  Read the article

• FTP Error: 550 Cant change directory to /: Permission denied

  - by Alessandro Merletti de Palo

  I installed Pureftpd and Ispconfig3 on my server. Starting from the point I'll probably uninstall ispconfig3 and make things directly on the server, now I am so stubborn I really want to see where's the problem. I created a ftp user through ispconfig, named amdpftp. It is related to a server user named web7. It logs in with username and password, but if i try to ls, it tells me: FTP Error: 550 Cant change directory to /: Permission denied I thought many things, like: 1. It is a problem of permissions. I went to /var/www/clients/client0/web7 , it was immutable and owned by root. Chattr -i and chown web7:client0 changed permissions, but with no effect. I restored to root:root, and made it immutable again. 2. I make some mistakes in the pureftpd installation: Wrong, it works pretty fine. The pureftpd.log doesn't seem to say anything bad. 3. The pureftpd.log file is only the pureftpd one, I should also check the mysqld functionality, as it is in a mysql database that user, password and working directory are stored. I enabled logging in the my.cnf, but also in the ispconfig database operation there wasn't anything wrong. Then I mkdir testftp in /var/www, chown web7:client0, and edited amdpftp user root directory from /var/www/clients/client0/web7 into /var/www/testftp . Guess what? It worked. So, now I know: 1. The PureFtpd works pretty fine 2. The mysql ispconfig database as well 3. The username and password of the virtual user created by ispconfig into pureftpd work 4. The correlation between username and password and the user web7 and the group client0 does work. What kind of magic has been cast upon the ispconfig directories [/var/www/clients/*] that block ftpusers to operate?

  Read the article

• Apache Simple Configuration Issue: per-user directory is accessing /~user instead of ~user

  - by Huckphin

  Hello. I am just getting Apache 2.2 running on Fedora 13 Beta 64-bit. I am running into issues setting my per-user directory. The goal is to make localhost/~user map to /home/~user/public_html. I think that I have the permissions right because I have 755 to /home/~user, and I have 755 to /home/~user/public_html/ and I have 777 for all contents inside of /home/~user/public_html/ recursively set. My mod_userdir configuration looks like this: <IfModule mod_userdir.c> # # UserDir is disabled by default since it can confirm the presence # of a username on the system (depending on home directory # permissions). # UserDir disabled root UserDir enabled huckphin # # To enable requests to /~user/ to serve the user's public_html # directory, remove the "UserDir disabled" line above, and uncomment # the following line instead: # UserDir public_html The error that I am seeing in the error log is this: [Sat May 15 09:54:29 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~huckphin/index.html denied When I login as the apache user, I know that /~huckphin does not exist, and this is not what I want. I want it to be accessing ~huckphin, not /~huckphin. What do I need to change on my configuration for this to work?

  Read the article

• apache2 VirtualHost in Mac OS X home directory

  - by aaron

  I am running Macports apache2 on Mac OS X 10.5. Whenever I configure a virtual host in the default folder, it works, however when I configure the virtual host in my home directory I get a "403 Forbidden" error. How do I configure a vhost in my home directory? Here is the configuration that yields "403 Forbidden" when I access "devel.mysite.com": /opt/local/apache2/conf/extra/httpd-vhosts.conf: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> #DocumentRoot "/opt/local/apache2/htdocs/mysite" DocumentRoot "/Users/myuser/Sites/mysite" ServerName devel.mysite.com </VirtualHost> The error message in /opt/local/apache2/logs/devel.mysite.com-error_log: [Sat Apr 17 19:54:49 2010] [error] [client 127.0.0.1] client denied by server configuration: /Users/myuser/Sites/mysite/ When I uncomment the line to make DocumentRoot in /opt/local/apache2/htdocs/mysite, it works: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> DocumentRoot "/opt/local/apache2/htdocs/mysite" #DocumentRoot "/Users/myuser/Sites" ServerName devel.mysite.com </VirtualHost> I get no errors or warnings when I start apache, and the only thing that is logged on startup is this (in /opt/local/apache/logs/error_log): [Sat Apr 17 19:56:29 2010] [notice] Digest: generating secret for digest authentication ... [Sat Apr 17 19:56:29 2010] [notice] Digest: done [Sat Apr 17 19:56:29 2010] [notice] Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8m DAV/2 configured -- resuming normal operations A few notes: * The permissions of /Home/myuser/Sites/mysite is 755, owned by myuser, group is staff * Everything else works as expected, until I move the ServerRoot of the vhost to the directory in my home

  Read the article

• Bidirectional real-time sync of large file tree between two distant linux servers

  - by dlo

  By large file tree I mean about 200k files, and growing all the time. A relatively small number of files are being changed in any given hour though. By bidirectional I mean that changes may occur on either server and need to be pushed to the other, so rsync doesn't seem appropriate. By distant I mean that the servers are both in data centers, but geographically remote from each other. Currently there are only 2 servers, but that may expand over time. By real-time, it's ok for there to be a little latency between syncing, but running a cron every 1-2 minutes doesn't seem right, since a very small fraction of files may change in any given hour, let alone minute. EDIT: This is running on VPS's so I might be limited on the kinds of kernel-level stuff I can do. Also, the VPS's are not resource-rich, so I'd shy away from solutions that require lots of ram (like Gluster?). What's the best / most "accepted" approach to get this done? This seems like it would be a common need, but I haven't been able to find a generally accepted approach yet, which was surprising. (I'm seeking the safety of the masses. :) I've come across lsyncd to trigger a sync at the filesystem change level. That seems clever though not super common, and I'm a bit confused by the various lsyncd approaches. There's just using lsyncd with rsync, but it seems this could be fragile for bidirectionality since rsync doesn't have a notion of memory (eg- to know whether a deleted file on A should be deleted on B or whether it's a new file on B that should be copied to A). lipsync appears to be just a lsyncd+rsync implementation, right? Then there's using lsyncd with csync2, like this: http://www.axivo.com/community/threads/lightning-fast-synchronization-with-csync2-and-lsyncd.121/ ... I'm leaning towards this approach, but csync2 is a little quirky, though I did do a successful test of it. I'm mostly concerned that I haven't been able to find a lot of community confirmation of this method. People on here seem to like Unison a lot, but it seems that it is no longer under active development and it's not clear that it has an automatic trigger like lsyncd. I've seen Gluster mentioned, but maybe overkill for what I need? UPDATE: fyi- I ended up going with the original solution I mentioned: lsyncd+csync2. It seems to work quite well, and I like the architectural approach of having the servers be very loosely joined, so that each server can operate indefinitely on its own regardless of the link quality between them.

  Read the article

• FTP on Linux "Failed to retrieve directory listing" not firewall issue

  - by Jaka Prasnikar

  I've got an VPS in germany running Debian X64. I have very strange issue. I have ISPConfig CP installed using proftpd and I can not connect to FTP by any means. Few hours ago I've had installed DirectAdmin on CentOS same VPS and same issue. Simply when I connect to FTP server I get these: Status: Resolving address of web02.defikon.com Status: Connecting to 130.255.190.71:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 12:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER default1 Response: 331 User default1 OK. Password required Command: PASS ****** Response: 230-User default1 has group access to: client0 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing I even tried telnet localhost 21 and the same happends. Once I issue command "LIST" I get time out. I've tried every thing and I can't get this to work =( Please help ! P.S.: iptables is turned off.

  Read the article

• Can I completely remove the Windows DNS in favour of BIND9 in an AD network?

  - by Vinícius Ferrão

  I would like to remove the DNS feature of Windows Domain Controllers and point the DNS servers to our BIND9 servers. I know it's possible to setup coexistence but this requires a number of extra Windows DNS Servers equals to the number of Domain Controllers in the network. Active Directory expects the _msdcs zone and other things like _tcp, _udp; etc. The main question is: how to make BIND9 takes care of all this AD specific data? And with dynamic updating to make AD even more happier. Thanks, PS: Making BIND9 points to the Windows DNS Servers to resolve the Active Directory specific zones isn't an option. We already do this... EDIT: As today, I'm running without Windows DNS. I'm writing up a guide on how to do this, and I'll update this topic.

  Read the article

• Roaming profile migration failed using Windows explorer manual copy

  - by Albert Widjaja

  Hi All, I'm at the final stage of migrating an old demoted DC server, now I'm stuck in migrating/copying the roaming profiles of the users from the old win2k server (oldServer1) into the new win2k3 server (newServer1) there are lots of profiles which points into the old server: \\oldServer1\profiles\user1 \\oldServer1\profiles\user2 \\oldServer1\profiles\user3 . . . \\oldServer1\profiles\userN in the ProfilePath I'd like to move it into: \\newServer1\profiles\user1 \\newServer1\profiles\user2 \\newServer1\profiles\user3 . . . \\newServer1\profiles\userN I tried to copy paste from my DOMAIN\Administrator account but it is failed to copy ? i cannot even browse inside the directory of user1 until userN ? is there any fastest way to do the copy process rather than "taking ownership" for each of those directory one by one ? [hopefully by taking ownership the user will still be able to use their profile normally] Thanks.

  Read the article

• Install DC again after removing on exchange server

  - by Kawharu

  I had a DC and Exchange 2010 installed on the same machine. I removed the DC role, and Exchange server went crazy. I tried to install the DC role again to fix the problem but ran into this error when running DCPROMO: Active Directory Domain Services could not create the NTDS Settings object for this Active Directory Domain Controller CN=NTDS Settings,CN=DC1,CN=Servers,CN=Manukau,CN=Sites,CN=Configuration,DC=AccessGroupnz,DC=com on the remote AD DC Server1.AccessGroupnz.com. Ensure the provided network credentials have sufficient permissions. "The DSA operation is unable to proceed because of a DNS lookup failure." Do you think I need to run this in an elevated command prompt, or change credentials somewhere to domain admin? Or is it something else?

  Read the article

• Folder permissions when using /etc/skel and pam

  - by rothgar

  I have a Red Hat 5.8 server that is bound to active directory and users are authenticated via active directory when they log in via sftp. User home folders are created during login using /etc/pam.d/system-auth. The specific line that creates the home folder is session optional pam_mkhomedir.so skel=/etc/skel/ umask=0066 This correctly gives home folders 711 permissions so no one else can read their directories. The problem is, the pam_mkhomedir.so also modifies permissions on all folders/files inside the /etc/skel folder which I don't want. There is a public_html folder (for apache) which needs to have 755 permissions so users can create web pages. Is there a way for me to either a) stop pam_mkhomedir.so from recursively changing all the file permissions or b) create a script that creates the public_html folder after skel is copied and to set the correct permissions?

  Read the article

• Migrate AD DS Server 2003 to Server 2008 R2

  - by user2566483

  I would like to get a couple opinions Found this article online and wanted to know if it is good to follow http://www.msserverpro.com/migrating-active-directory-domain-controller-from-windows-server-2003-sp2-to-windows-server-2008-r2/ Couple of things that need to be done. 1. Move over all active directory settings from old Server 2003 server to new Server 2008R2 2. Setup all users on new server using csvde. csvde -f output.csv -- on old server csvde -i -f output.csv -- on new server Any advice would be greatly appreciated.

  Read the article

• Moving MySQL directory on an Amazon EC2 machine

  - by Traveling Tech Guy

  I'm trying to have MySQL point to a directory on an EBS volume I mounted on my EC2 machine. I took th following steps: Stopped MySQL (/etc/init.d/mysqld stop) - successful Created a MySQL directory on my volume, mounted on /vol (mkdir /vol/mysql) Copied the contents of /var/lib/mysql to /vol/mysql (cp -R /var/lib/mysql /vol/mysql) Chanded the owner and group of that directory to match the original (chown -R mysql:mysql /vol/mysql) - after this step, the 2 directories are identical. Edited the /etc/my.cnf file (commented 2 original lines): [mysqld] #datadir=/var/lib/mysql #socket=/var/lib/mysql/mysql.sock datadir=/vol/mysql socket=/vol/mysql/mysql.sock` Started MySQL (/etc/init.d/mysqld start) - FAILED The error file /var/log/mysqld.log contains the following lines: 100205 20:52:54 mysqld started 100205 20:52:54 InnoDB: Started; log sequence number 0 43665 100205 20:52:54 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.45' socket: '/vol/mysql/mysql.sock' port: 3306 Source distribution No other errors are available. What am I doing wrong? Where can I find the error/s encountered by MySql? If I restore the original lines, MySQL starts, leading me to believe it may be a permissions issue - but permissions are the same for both directories? Thanks!

  Read the article

• Multiple domains, Exchange 2010, mailbox access via OWA

  - by Rob

  We currently run two separate domains where our new implementation of exchange 2010 is currently on a separate domain the users. My problem is: [email protected] cant access his mailbox at joe@domainb via OWA even though full access and sendas has been granted on domainb's mailbox to domaina's account. I keep receiving the error: Access is denied. The Active Directory resource couldn't be accessed. This may be because the Active Directory object doesn't exist or the object has become corrupted, or because you don't have the correct permissions. anyone able to help please? Take care

  Read the article

• Serving only certain files from a directory to users on IIS7

  - by HarbingTarbl

  I'm have a need to show the most up to date version of a certain file in a directory to users who access a folder on my site (lets call this folder logs). I can't just move the file into the folder as another process relies on being able to find and edit this file while it is running. At first I had thought I could just create a folder on my site, give it the correct permissions and then create a symbolic link to the file. However it seems IIS7 does not follow symlinks. Another solution would be to create a phpscript that pulls the correct file and displays it, but that felt like over-engineering the solution. I know that on Apache this would be simple, but I can't figure out how to do it with IIS7. To give an idea of the folder structure I'm working with. The directory looks like this. Root --File I need to serve. --File containing plain text passwords. --Other folders/files. I can't move any of these files. If I just serve the entire directory using Virtual Directories in IIS I'll also be sharing files and folders containing configuration and other sensitive information.

  Read the article

• Problems installing LYNC on non-domain controler

  - by Trikks

  I have two servers in this set up. AD and EX, the domain is called mydomain.net The AD is a Windows 2008 Server (32 bit) with Active Directory installed AD only has it's own ip in the DNS-servers list AD.mydomain.net does resolve correctly in the dns EX is a Windows 2008 R2 that is connected to the mydomain.net-domain EX only DNS server is the ip of the ad.mydomain.net There are no firewalls running between the two servers When trying to install Lync 2010 on the EX server I get the following error "Not available :Failure occurred attempting to check the schema state.Please ensure Active Directory is reachable." I can control the AD from EX, also login to it and do successful checks like netdom query /domain:mydomain.net fsmo ...that resolves correctly I suspect there is something fundamentally wrong with my setup, maybe Lync need a 2k8 R2 ad?

  Read the article

• How to use IIS as a trusted proxy for ActiveDirectory SSO?

  - by brofield

  I'm trying to add Active Directory single-sign-on support to an existing SOAP server. The server can be configured to accept a trusted reverse-proxy and use the X-Remote-User HTTP header for the authenticated user. I want to configure IIS to be the trusted proxy for this service, so that it handles all of the Active Directory authentication for the SOAP server. Basically IIS would have to accept HTTP connections on port X and URL Y, do all the authentication, and then proxy the connection to a different server (most likely the same X and Y). Unfortunately, I have no knowledge of IIS or AD (so I am trying my best to learn enough to build this solution) so please be gentle. I would assume that this is not an uncommon scenario, so is there some easy way to do this? Is this sort of functionality built into IIS or do I need to build some sort of IIS proxy program myself? Is there a better option for getting the authentication done and the X-Remote-User HTTP header set than requiring IIS?

  Read the article

• cd not doing anything in the Windows Shell [closed]

  - by ACarter

  Possible Duplicate: Using cd Command in Windows Command Line, Can’t Navigate to D:\ Look at the latter lines of the shell, the cd lines. Nothing's happening :( This is the Win8 shell. I used to have Win7 on C:\, and have since installed Win8 on D:. As you can see, the prompt is in C:\, and so I'm trying to move it to D:\ where it should be. And nothing's happening. How can I change the directory? (Bonus points to anyone who can tell be how to change the default shell directory.

  Read the article

• AD LDS High availability

  - by user792974

  We are currently using CAS for multiple directory authentication. AD for internal users, AD LDS for external users. I've read that NLB is a possible solution, but wondering if this is possible with SRV records, and how about you would correctly configure that. With our AD directory, I can bind with olddomain.local, and hit any of the DCs in the domain. We don't want to hardcode servernames into CAS, so the end goal is to bind with LDSdomain.gov. nslookup -type=srv _ldap._tcp.LDSdomain.gov returns _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 100 port = 1025 svr hostname = server01 _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 200 port = 1025 svr hostname = server02

  Read the article

• Outlook 2007 GAL Phone List

  - by s15199d

  I just spent a lot of time populating Phone Numbers and Fax Numbers in our GAL/Active Directory. The goal of which was to replace our static *.xlsx file that we use as a corporate phone directory. I know I can see the GAL by clicking on the To... button, and I can see more specific info for a particular user, by adding them as a recipient and double-clicking their name in the To: field. Is there any way (inside Outlook) to have a laundry-list view of all users and phone/fax/mobile/address similar to the phone list view for contacts? Are there any other tools that might provide this functionality. I've used a GAL web interface before, but that cost $ and as I recall was challenging to manage.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >