Search Results

Search found 10667 results on 427 pages for 'libreoffice basic'.

Page 68/427 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Is there a good XP like windows explorer for windows Vista?

  - by Brett Ryan

  I'm still refusing to go to Windows Vista and now Windows 7 mainly due to the windows explorer, I find it cumbersome and hard to use exclusively with a keyboard. I use XP file explorer in the most basic view, the address bar at the top and files always in list view underneath. The reason I do this is because I'm almost blind and do everything from the keyboard and don't touch the mouse whilst navigating through files, this is because I can type "L[ENTER]D[Enter]B[Enter]" and know that I'm in "c:\documents and settings\Brett Ryan", and I can hit [Tab] once to go to the address bar to type in a folder. Can anyone suggest a replacement for windows explorer that brings back this basic navigational behavior?

  Read the article

• Problem with regsvr32 on Windows Server 2010

  - by Chris Anton

  Hi all! I am attempting to register a basic COM dll on a Windows Server 2008 standard box. I run regsvr32 capicom.dll and it reports DllRegisterServer in capicom.dll succeeded. This is the same process we've used for years on Windows Server 2003. Sadly, when I attempt to create the object via a very very basic Microsoft vbscript example Set oStore = CreateObject("CAPICOM.Store") it throws a "ActiveX component can't create object" error. Thinking maybe it was a problem with this dll, I tried a few other DLLs we use with the same result. I tried using the regsvr32 in system, system32, and syswow64 all with the same result. I don't know too much about the differences between each of those, but figured it was worth a shot. The dll is being stored on the d:\ and seems to have correct permissions (though that'd be a different error altogether). Thanks to any help or thoughts you might have!

  Read the article

• DNS Server and Private HTTP / SOCKS Proxy

  - by DucDigital

  Hi every one, this is just a small hacking attemp to our router. I'm trying to setup a small DNS and forward webpages through proxy behind the scene. I've successfully implement the DNS server that will do the resolving or anything involved in address resolve. But is there anyway I can forward the user using DNS to a proxy instead of request directly to the server? Are there any software/opensource that I can use? I notice on paid wireless, they can provide a login page if user is not login yet, i think this is a way of implementing proxy. Also the hardware is very basic with linksys and netgear router which connect directly to the internet. It's a basic LAN

  Read the article

• DNS Server and Private HTTP / SOCKS Proxy

  - by DucDigital

  Hi every one, this is just a small hacking attemp to our router. I'm trying to setup a small DNS and forward webpages through proxy behind the scene. I've successfully implement the DNS server that will do the resolving or anything involved in address resolve. But is there anyway I can forward the user using DNS to a proxy instead of request directly to the server? Are there any software/opensource that I can use? I notice on paid wireless, they can provide a login page if user is not login yet, i think this is a way of implementing proxy. Also the hardware is very basic with linksys and netgear router which connect directly to the internet. It's a basic LAN

  Read the article

• Can I have both Windows dynamic disk partition and some other non-Windows partition on the same disk?

  - by haimg

  When a basic Windows disk is converted to dynamic, Windows creates a partition that span the whole disk with the type of "Windows LVM" and manages its dynamic partitions within this space. So even if there is still free space on this disk, it is not visible to any other OS besides Windows. This happens with MBR and GPT disks both. I would like to share a Windows dynamic disk with some other OS. I have to have dynamic disks because I use Windows SoftRaid (mirrors). So, my questions are: Is there any way to "force" Windows to take up less then the whole disk when it converts a basic disk to dynamic? Will Windows tolerate having some other non-Windows partition on its dynamic disk?

  Read the article

• IIS7 authentication

  - by Kev

  To give our user's the ability to protect content on their IIS6 sites we used a tool called IISPassword which emulates .htaccess to provide Basic authentication. There isn't support for IISPassword on IIS7 at the moment. Is there an equivalent mechanism I can use built into IIS7 instead? I'm well aware of ASP.NET Forms Authentication, but I need a way for users deploying non-ASP.NET content (such as PHP, Perl, images etc) to be able to use Basic authentication but not have to write code to achieve this. Is this possible?

  Read the article

• What are some hosted MySQL solutions?

  - by bigmac

  I would like to host a MySQL database somewhere. The basic solution would be to get a VPS, but then I am stuck doing all the sysadmin stuff. It's not terribly difficult if you are not doing anything fancy, but if something goes wrong (like a security breach), it may be hard to resolve or even diagnose in the first place. On the other end of the spectrum, I found Xeround and Amazon RDS. Xeround is not exactly standard MySQL. Amazon seems a bit complex to get started (which is weird because they specifically say it is "simple to deploy"). Why is there nothing in the middle? Is there no demand for a basic hosted MySQL solution?

  Read the article

• Monitor RAM usage on CentOS and restart Apache at a certain usage

  - by Chris

  Hi, I'm running a CentOS 5.3 server with a basic LAMP stack. I've optimized LAMP and my code to run efficiently as possible, but Apache has a memory leak somewhere that kills my server every hour or so. What is the best way to write a script that will monitor the memory usage and if it peaks over, say, 450MB kill all the Apache processes and restart Apache. I know C++/PHP and basic Linux server administration but I'm not familiar with Perl or bash scripting. I'd be open to learn any solutions, though, as a temporary solution while I find the issue.

  Read the article

• WAMP Server vs LAMP Server

  - by Rob A

  Hi All, Just wondering, I want to set up a basic web server at home. I run Windows (XP on the machine to be a server), however I also have Ubuntu on hand if I need to run that. Basically I was wondering if there are any large difference between WAMP servers and LAMP servers? I know the run virtually the same software, but does one perform better than the other? Are there hidden benefits of running it in Ubuntu instead of XP, or the other way around? I know its a basic question, but I havent done anything with Ubuntu, and Ive done about the same amount with web server-ing. Thanks!

  Read the article

• subversion problem on mac os x

  - by user32942

  This exists in my httpd.conf file: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn Allow from all #AuthType Basic #AuthName "Subversion repository" #AuthUserFile /Users/iirp/Sites/svn-auth-file #Require valid-user </Location> This is working file When I change this to: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn #Allow from all AuthType Basic AuthName "Subversion repository" AuthUserFile /Users/iirp/Sites/svn-auth-file Require valid-user </Location> and when I access my repository through URL, it gives me the authentication screen but after that screen my svn repository is not showing up correctly. to see message that it gives to me is: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

  Read the article

• Outlook 2007 VBA/Macro

  - by user27538

  Hi, I am a very basic user new to macros and vba. My problem is that I recive online orders to which i need to click an auto generated unique order hyperlink to confirm receipt of the order within a specified time period. This is a mundane task having to be on 'standby' and was wondering if there was a way to have this link automatically clicked when the email arrives. Just to reiterate the link has a unique reference and is different on each email. Please bare in mind that I am a very basic user and would probably require step by step instructions. Many thanks in advance

  Read the article

• How do I force .htaccess authorization to occur over ssl?

  - by kenja

  I'm trying to force a particular directory to require only allowed IPs and a valid username/password through basic authorization. To ensure that the username/password are sent in encrypted form, I want the directory to also force SSL use. Here is what I have in my .htaccess file: # Force HTTPS-Connection RewriteEngine On RewriteCond %{SERVER_PORT} !^443$ RewriteRule (.*) https://www.mywebsite.com%{REQUEST_URI} [R,L] ## password begin ## AuthName "Restricted Access" AuthUserFile /var/www/admin/.htpasswd AuthType Basic Require valid-user Order deny,allow Deny from all Allow from 79.1.231.151 62.123.134.83 Satisfy All Unfortunately, when I access that directory using http protocol, it is asking for the password before it redirects the page to the secure version. This means the password is sent unencrypted. What am I doing wrong? Is there a way to do this?

  Read the article

• Natively boot Virtualbox Image

  - by isync

  I am faced with a Windows hardware/software problem left over from another person. It's on me to resolve. It's a mission critical setup. The situation is: I've got a physical server machine with: -Disk C:\ (one disk) containing a basic install of Windows Server 2008 R2, formerly Win Vista Pro, now gone. -Disk D:\ (software Raid) containing a VirtualBox disk image of a configured Windows Server 2008 R2 running SQL Server R2 among others. What shall I do now? Migrate all the stuff from the configured VM to the basic but natively installed C:\ Windows Server 2008 R2 (with the possibility of breaking stuff)? Or, Setting up the machine to "natively boot" the VM with the help of bcdedit.exe (something I've read about, what I've never done, what I don't know of if it works, if it hits performance, or if it is stable for production) For me, being old skool, I am in the process of de-virtualising everything (option 1). But I'd be happy if someone suggests I am ok to go down the "natively boot" route.

  Read the article

• Nginx access log shows authenticated user "admin"

  - by bearcat

  I came across a line in my Nginx access log: 218.201.121.99 - admin [12/Dec/2012:18:33:18 +0800] "GET /manager/html HTTP/1.1" 444 0 "-" "-" Let me stress that there is only 1 record with this IP. Notice the authenticated user admin. After some googling, I was able to find out only that this is authenticated user (http://wiki.nginx.org/HttpCoreModule#.24remote_user), which was authenticated by the Auth Basic Module (http://wiki.nginx.org/HttpAuthBasicModule). However, nowhere in my site (configuration) do I use HTTP basic authentication. What is going on? How did it get there? Was the user authenticated?

  Read the article

• Stop VLC player from saving effects & filter settings

  - by bocamax

  VLC Player v1.1.11 Windows 7 Ultimate VLC player launches each new video with setting I used once to brighten a dark video. On a second computer, VLC player opens all videos rotated 270 which was a feature I used once. I now have to manually uncheck Image adjust on one computer & uncheck Transform on another for each video to have it play without these custom settings. I've custom mapped VLC Hotkeys that I use extensively. As a result, I do not want to "reset preferences" and lose my Hotkey mapping. VLC Tools Settings Video Effects Basic Image Adjust (Brightness, Contrast, etc.) VLC Tools Settings Video Effects Basic Transform (Rotate 90, 180, 270) Is there a setting I'm not finding to stop VLC from applying a one time adjustment to all videos?

  Read the article

• video streaming infrastructure advice

  - by Alchemical

  We would like to set-up a live video-chat web site and are looking for basic recomendations for software and hardware set-up. Most streams will be broadcast live from a single person with a web cam, etc., and viewed by typically 1-10 people, although there could be up to 100+ viewers on the high side. Audio and video do not have to be super-high quality, but do need to be "good enough". The main point is to convey the basic info in the video (and audio). If occasionally the frame-rate drops low and then goes back to normal fairly soon, we could live with that. Budget is an issue, so we are in general looking for a lower cost solution that will give us most of what we need in temers of performance and quality. We are looking at Peer1 for co-lo. The rest of our web site will be .Net / Windows platform. We are open to looking at any platform for the best streaming solution, although our technical expertise is currently more on the Windows side.

  Read the article

• How do I force .htaccess authorization to occur over ssl?

  - by kenja

  I'm trying to force a particular directory to require only allowed IPs and a valid username/password through basic authorization. To ensure that the username/password are sent in encrypted form, I want the directory to also force SSL use. Here is what I have in my .htaccess file: # Force HTTPS-Connection RewriteEngine On RewriteCond %{SERVER_PORT} !^443$ RewriteRule (.*) https://www.mywebsite.com%{REQUEST_URI} [R,L] ## password begin ## AuthName "Restricted Access" AuthUserFile /var/www/admin/.htpasswd AuthType Basic Require valid-user Order deny,allow Deny from all Allow from 79.1.231.151 62.123.134.83 Satisfy All Unfortunately, when I access that directory using http protocol, it is asking for the password before it redirects the page to the secure version. This means the password is sent unencrypted. What am I doing wrong? Is there a way to do this?

  Read the article

• Is there any reason to install software as root as opposed to sudo installing software as a sudoer?

  - by Tchalvak

  I'm setting up a new server running Ubuntu Server Edition, and I'm not certain what the difference would be between installing most of the basic software as root, vs installing the basic software as an admin user using sudo apt-get install . For one thing, I'm not sure whether after installing the software as root, I'll need sudo access when running the software as a user (e.g. if I install git as root). On the other hand, if I install software as a user, I could conceive of it not being available to other users that I create in the future. What's the best practice here?

  Read the article

• Rugged Netbook and software options for Running R statistical software?

  - by Thomas

  I am interested in purchasing a netbook to do field research in another country. My hardware specifications for the nebtook: -Be rugged enough to survive a bit of wear and tear -Fairly fast processing (the ability to upgrade from 1GB of RAM to 2GB) -A battery life of longer than 6 hours -At least a 10 inch screen -A decent camera for Skyping My software needs: -Be able run a Spreadsheet program to do basic data input (like Excel or Open Office) -Use the Open Source Statistical Program R to do basic data analysis (Regression, data analysis etc.) -Word Processing (Word or Open Office) Do you have any suggestions on which models or brands my fit my needs? Some of the models I was considering: Samsung NB-30 Toshiba NB 305 Asus Eee PC 1005HA Lenovo S10-2 Also any recommendations on the best software to load on the aforementioned Netbooks. I saw this resource from [livehacker][6] Any comments. Thanks for your help! -Thomas

  Read the article

• Linux bash: when to use egrep instead of grep?

  - by Michael Mao

  Hi all : I am preparing for a Linux terminal assessment now, I tried to Google and found most resources are referring to the basic "grep" rather than the more powerful "egrep" -- well, that is at least what the professor said in lecture. I am always working with small samples so performance tuning is a thing too far away. So basically I'd like to know are there any areas where I must switch to egrep to do it in a better way? Is it safe to work with basic "grep" as for now? will there be potential risks? Sorry about my limited knowledge on Linux shell commands, the man page looks like a maze to me and honestly I haven't put much time in understanding all the features both command provide.

  Read the article

• WinPE, Startnet.CMD and passing variables to second batch file not working

  - by user140892

  I don't know scripting or PowerShell (yes I need to learn something). I'm not an expert batch file maker either. I have a WinPE flash drive which I used to deploy OS images. I have the WIM, drivers and anything needed else outside the WinPE environment to ensure that Updates, changes are easier for me to make. I use the "STARTNET.CMD" batch file which is part of the WinPE. The reason to go through the letter drives is that the WinPE always gets the X letter drive assigned. The flash drive itself can receive a random letter which always changes. My deployment menu is located on the flash drive it self and not inside the WinPE. This is so that if I need to make a change I don't have to re-do the WinPE. I am able to locate the "menu.bat" batch file and launch it. I use a variable to capture the letter drive. I call the second batch file named "menu.bat" and pass the variable to it. When the second batch file loads, I believe that I am calling the variable correctly. If I break out of the batch file I can echo the variable and see the expected reply. The issue is that I can't use the variable to work with anything on the second batch file. In my test, I can get this to work over and over. When it runs from the real USB flash drive it does not work. I removed comments from the second batch file to make it smaller. My issue is that files below all get a message stating that the system cannot find the path specified. Diskpart Imagex.exe bcdboot.exe Why can't I get the varible to properly function when I try to using example "ImageX.exe"? Contents of the Startnet.cmd @echo off for %%p in (a b c d e f g h i j k l m n o p q r s t u v w x y z) do if exist %%p:\Tools\ set w=%%p Set execpatch=%w%\Tools\ call %w%:\Menu.bat \Tools\ Contents of the Menu.BAT @echo off set SecondPath=%1 cls :Start cls Echo. Echo.============================================================== Echo. Windows 7 64 Bit Ent Basic Desktops Echo.============================================================== Echo. Echo A. 790 Windows 7 - Basic Echo. Echo. Echo I. Exit Echo. Echo. set /p choice=Choose your option = if not '%choice%'=='' set choice=%choice:~0,1% if '%choice%'=='a' goto 790_Windows_7_Basic echo "%choice%" is not a valid (answer/command) echo. goto start :790_Windows_7_Basic REM DISKPART /s %SecondPath%BatchFiles\Make-Partition.txt %SecondPath%imagex.exe /apply %SecondPath%Images\Win7-64b-Ent-Basic-SysPreped.wim 1 o:\ /verify %SecondPath%bcdboot.exe o:\Windows /s S: Copy %SecondPath%Unattended\unattend.XML o:\Windows\System32\sysprep\unattend.XML /y xcopy %SecondPath%Drivers\790\*.* o:\Windows\INF\790\ /E /Q /Y MD o:\Windows\Setup\Scripts\ Copy %SecondPath%BatchFiles\SetupComplete.cmd o:\Windows\Setup\Scripts\ /y Goto Done :Done Exit

  Read the article

• Sendmail smtp-auth issues

  - by SlackO

  I'm running into a problem with Sendmail trying to implement SMTP- auth. I"m running 8.14.5 and have saslauthd running under FreeBSD 7.0-R. I don't believe I have starttls enabled (but I also compiled a version with it and have been testing it too - same problem) - just looking for basic auth, but am wondering if my configuration is not compatible with modern mail clients? I don't think I have any certs set up. It seems an older version of Microsoft Outlook Express works fine with SMTP-auth with no problems, but Outlook 2010 won't work, and neither will Eudora (basic settings to not use encryption and use same uid/pw as pop3 account name) When trying to send mail the server reports: "550 571 Relaying Denied. Proper authentication required." Is there some config that I am missing? Why does it work with Outlook Express but not other e-mail clients? my site.config.m4 has: APPENDDEF(confENVDEF',-DSASL=2') APPENDDEF(conf_sendmail_LIBS',-lsasl2') dnl APPENDDEF(confLIBDIRS',-L/usr/local/lib/sasl2') APPENDDEF(confLIBDIRS',-L/usr/local/lib') APPENDDEF(confINCDIRS',-I/usr/local/include') My sendmail.mc has: define(ConfAUTH_OPTIONS',A') TRUST_AUTH_MECH(LOGIN PLAIN')dnl define(ConfAUTH_MECHANISMS',`LOGIN PLAIN')dnl My /usr/local/lib/sasl2/Sendmail.conf has: pwcheck_method: saslauthd When I restart sendmail this shows up in the logs: Jun 16 12:36:24 x sm-mta[79090]: restarting /usr/sbin/sendmail due to signal Jun 16 12:36:24 x sm-mta[81145]: starting daemon (8.14.5): SMTP+queueing@00:30:00 Jun 16 12:36:24 x sm-mta[81147]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jun 16 12:36:24 x sm-mta[81148]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 testing on the cmd line: telnet localhost 587 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 xxxt ESMTP Sendmail 8.14.5/8.14.5; Fri, 15 Jun 2012 18:28:03 -0500 (CDT) ehlo localhost 250-xxxx Hello localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP I am not using any certs or ssl right now - just trying to get basic auth to work. Anyone have any ideas?

  Read the article

• How can artificially create a slow query in mysql?

  - by Gray Race

  I'm giving a hands on presentation in a couple weeks. Part of this demo is for basic mysql trouble shooting including use of the slow query log. I've generated a database and installed our app but its a clean database and therefore difficult to generate enough problems. I've tried the following to get queries in the slow query log: Set slow query time to 1 second. Deleted multiple indexes. Stressed the system: stress --cpu 100 --io 100 --vm 2 --vm-bytes 128M --timeout 1m Scripted some basic webpage calls using wget. None of this has generated slow queries. Is there another way of artificially stressing the database to generate problems? I don't have enough skills to write a complex Jmeter or other load generator. I'm hoping perhaps for something built into mysql or another linux trick beyond stress.

  Read the article

• Strip my windows NTFS disk of all ACLs

  - by Alain Pannetier

  When you purchase a windows PC nowadays, you don't actually "own" the whole disk... There are so many ACLs on each folder that there are portions of it you actually can access only through a complex sequence of actions requiring skills well beyond the average PC user. You have to drill down to deeply buried dialog boxes accessible through concealed buttons. You have to understand at which level of the hierarchy you have to take ownership, remove ACLs etc... Yet when you think of it, that's your PC, that's what the "P" of PC originally stand for... So I'm toying with the idea of just stripping the disk of all ACLs I just purchased and leave standard file protections do the basic protection work... Just like previous century Windows used to do... (before I chmod -R 777 ;-) Has anybody done that already and nevertheless survived in reasonably good shape for a reasonable amount of time ? Any technical advice to do that ? Powershell script ? basic script using iCACLS ?

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >