Search Results

Search found 3984 results on 160 pages for 'modules'.

Page 68/160 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Fan running constantly on a Dell D420 laptop

  - by Halik

  I'm running latest Ubuntu 12.04 beta on a Dell D420 laptop. The fan is spinning almost constantly - even after turning the PC off, letting it cool down, and then turning it back on, the fan will turn on after some idle time. Not to mention any CPU work. The CPU temps are normal, in range of 50-55 idle, and up to 70 with some load. It wouldn't be an issue, but the same PC running Fedora, or Arch Linux, had a much more modest fan profile - the temps were managed while you seldom heard the fan. To counter the problem, I currently use i8k tools, set manual temperature thresholds which seemed to have worked, but the i8kmon has a tendency to cycle the fan between lower and higher state within aboutin a second intervals - which is extremely annoying. As far as I can tell I did not run any special software (beside laptop-mode-tools), or any additional kernel modules when running Arch Linux and I can't tell about Fedora.

  Read the article

• The Great Ball Contraption: A Massive Automated LEGO Construction

  - by Jason Fitzpatrick

  This massive LEGO construction combines 17 distinct modules into a lengthy factory-like conveyance system for five hundred LEGO balls. The variety and creativity of the methods employed is, dare we say, dazzling. Slotted robotic arms? Screw lifts? Handshake object transfers? Catapults that shoot baskets? The sheer number of creative and novel solutions LEGO builder Akiyuky employs to move the balls through his machine left us mesmerized for the whole seven minute video. Akiyuky’s LEGO Blog (Google Translate Interpreted)[via Make] How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• New at TRC: Networking Products

  - by uwes

  The new category "Networking Products" has been added last week at Oracle Hardware Technical Resource Center (HW TRC). The following list summarize the different areas which are included. Feel free to explore. Oracle Virtual Networking customer and technical presentation, Datasheets, partner FAQ and more 10 GbE Network Adapters and Switches customer and technical presentations, Datasheets, partner FAQ, Documentation and more Gigabit Ethernet customer presentations, partner FAQ, Documentation and more InfiniBand Datasheets, partner FAQ and Documentation Blade Server Network Express Modules (NEMs) technical presentation, Datasheets, partner FAQ, White Paper and more Storage Networking customer presentations, Datasheets, partner FAQ and more Please be aware that you need to be registered at the Oracel HW TRC. To register click here ... and follow the instructions..

  Read the article

• difference in using third party social buttons and directly integrating each social buttons ourselves

  - by Jayapal Chandran

  I wanted to add specific social buttons to my article. I used ShareThis. It gives a facebook like button, google plus button, etc... by default. were as in other articles of different modules i had integrated the facebook like by myself by following the documentation (including markup in the head section) What is the difference in adding manually with many markups and using third party code? Will that affect SEO or any other advantage over the respective social networking site (here for example facebook and google plus)?

  Read the article

• DeskLights Turns Desk Surface Into Giant Multi-Purpose Notifier

  - by Jason Fitzpatrick

  We’ve seen desks with LEDs under frosted glass before, but this is the first desk we’ve seen where the LEDs serve as a sophisticated notification system. Check out the video above to see desk, designed by Michael LaGrasta, in action. The secret sauce is an array of LED modules, linked to an Arduino board, which is in turn running a tiny web server. Hit up the link below for the full build guide. DeskLights 2.0 [via IKEAHackers] Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

  Read the article

• WebCenter Customer Spotlight: spectrumK Holding GmbH

  - by me

  Solution Summary spectrumK Holding GmbH was founded in 2007 by various German health insurance funds and national insurance associations and is a service provider for the healthcare market, covering patient care management, financial management, and information management, as well as payment services and legal counseling. spectrumK Holding GmbH business objectives was to implement innovative new Web-based services and solution systems for health insurance funds by integrating a multitude of isolated solutions from different organizations. Using Oracle WebCenter Portal, Oracle WebCenter Content, and Site Studio, the customer created a multiple-portal environment and deployed the 1st three applications for patient receipt, a medication navigator, and disability information. spectrumK Holding GmbH accelerated time-to-market for new features by reducing the development time, achieved 40% development and cost savings using standard modules and realized 80% overall savings using the Oracle multiple portal environment, as compared to individual installations. >> Read the full story

  Read the article

• LSP vs OCP / Liskov Substitution VS Open Close

  - by Kolyunya

  I am trying to understand the SOLID principles of OOP and I've come to the conclusion that LSP and OCP have some similarities (if not to say more). the open/closed principle states "software entities (classes, modules, functions, etc.) should be open for extension, but closed for modification". LSP in simple words states that any instance of Foo can be replaced with any instance of Bar which is derived from Foo and the program will work the same very way. I'm not a pro OOP programmer, but it seems to me that LSP is only possible if Bar, derived from Foo does not change anything in it but only extends it. That means that in particular program LSP is true only when OCP is true and OCP is true only if LSP is true. That means that they are equal. Correct me if I'm wrong. I really want to understand these ideas. Great thanks for an answer.

  Read the article

• Elmah

  - by csharp-source.net

  LMAH (Error Logging Modules and Handlers) is an application-wide error logging facility that is completely pluggable. It can be dynamically added to a running ASP.NET web application, or even all ASP.NET web applications on a machine, without any need for re-compilation or re-deployment. Once ELMAH has been dropped into a running web application and configured appropriately, you get the following facilities without changing a single line of your code: * Logging of nearly all unhandled exceptions. * A web page to remotely view the entire log of recoded exceptions. * A web page to remotely view the full details of any one logged exception. * In many cases, you can review the original yellow screen of death that ASP.NET generated for a given exception, even with customErrors mode turned off. * An e-mail notification of each error at the time it occurs. * An RSS feed of the last 15 errors from the log.

  Read the article

• Version control and personal configuration file

  - by Erel Segal Halevi

  Our project uses a user-specific configuration file. This file is currently not in version control, since it is different for each user. The problem is, whenever a developer adds a new module that requires configuration, or changes the name of an existing modules, the other developers get errors because their private configuration files are not updated. To solve the problem, we thought of working with two configuration files: a default/global configuration file that will be in version control and will be updated regularly by each developer that adds a new module, and a private configuration file that will be kept out of version control and will contain only the user-specific changes. However, this still seems like an ad-hoc solution. Can you propose a better solution? What do the professionals do?

  Read the article

• How to make pulseaudio work again?

  - by Pawel M.

  I was having problems with sound (mono only output), so following advice from another askubuntu question I made some edits in /etc/pulse/default.pa After rebooting I had no sound at all. So I deleted /etc/pulse/default.pa entirely and tried another reboot. I did not backup the file (stupid, I know). How to come back to working config? edit: I tried: sudo apt-get remove pulseaudio (reboot) sudo apt-get install pulseaudio (reboot) It's still not working. The file /etc/pulse/default.pa is missing. Here's what pulseaudio and pacmd commands show: $ pulseaudio E: [pulseaudio] main.c: Daemon startup without any loaded modules, refusing to work. $ pacmd No PulseAudio daemon running, or not running as session daemon.

  Read the article

• Drupal : le CMS open-source sortira en version hébergée en 2010 pour concurrencer WordPress, Google

  Le CMS open-source Drupal sortira en version hébergée Courant 2010 pour concurrence WordPress, Google Sites et Microsoft CMS Acquia, la société qui édite Drupal, vient d'annoncer qu'une version hébergée de son célèbre CMS open-source en PHP ? qui sert par exemple à concevoir le site de la NASA ? serait lancée vers le milieu de l'année. Baptisée Drupal Garden, cette version est actuellement en beta-test privé. Elle sera destinée à concurrencer WordPress, actuel leader sur le marché, et à démocratiser l'outil jusqu'ici assez peu connu du grand public. Drupal a en effet souvent été critiqué pour sa complexité. Le CMS propose effectivement un grand nombre de modules comp...

  Read the article

• 11.10 AMD64 alternate installer has broken packages?

  - by Ibrahim

  I'm installing Ubuntu 11.10 from the alternate install ISO because I need to use LVM. Unfortunately, at some point the installer fails because it can't install libpurple0 and ubuntu-desktop because they depend on libsasl2-modules but it's not installable somehow. It also has the same error for xserver-xorg-video-all but I think I could probably live without that one. Kind of annoying that this is broken, I'm guessing maybe if I had internet it would work but right now I'm on a campus network with a captive portal so I can't actually get a network connection without using a browser to log in. Just thought someone should know or maybe I'm doing something wrong. I'm going to try installing 11.04 alternate and then upgrading I guess.

  Read the article

• How to ensure apache2 reads htaccess for custom expiry?

  - by tzot

  I have a site with Apache 2.2.22 . I have enabled the mod-expires and mod-headers modules seemingly correctly: $ apachectl -t -D DUMP_MODULES … expires_module (shared) headers_module (shared) … Settings include: ExpiresActive On ExpiresDefault "access plus 10 minutes" ExpiresByType application/xml "access plus 1 minute" Checking the headers of requests, I see that max-age is set correctly both for the generic case and for xml files (which are auto-generated, but mostly static). I would like to have different expiries for xml files in a directory (e.g. /data), so http://site/data/sample.xml expires 24 hours later. I enter the following in data/.htaccess: ExpiresByType application/xml "access plus 24 hours" Header set Cache-control "max-age=86400, public" but it seems that apache ignores this. How can I ensure apache2 uses the .htaccess directives? I can provide further information if requested.

  Read the article

• Simple vs Complex (but performance efficient) solution - which one to choose and when?

  - by ManojGumber

  I have been programming for a couple of years and have often found myself at a dilemma. There are two solutions - one is simple one i.e. simple approach, easier to understand and maintain. It involves some redundancy, some extra work (extra IO, extra processing) and therefore is not the most optimal solution. but other uses a complex approach,difficult to implement, often involving interaction between lot of modules and is a performance efficient solution. Which solution should I strive for when I do not have hard performance SLA to meet and even the simple solution can meet the performance SLA? I have felt disdain among my fellow developers for simple solution. Is it good practice to come up with most optimal complex solution if your performance SLA can be met by a simple solution?

  Read the article

• Macbook Pro 8,2 Graphics switching - Ubuntu 12.04

  - by fgs

  I've been reading docs and various pages for a few hours now and can't seem to put all of the pieces together on this. Basically I am trying to get 12.04 installed on my MBP 8,2 with graphics card switching working in some way or another. My basic understanding is that I need to do an EFI boot install of ubuntu so that graphics card switching will work (due to the hardware design). From there I may be able to use one of the kernel modules for graphics switching: https://help.ubuntu.com/community/HybridGraphics That article isn't clear on whether I need to do an EFI install. I have also seen comments in posts here that say and EFI install works by default as long as you have refit installed. Overall, I'm quite lost as to the simplest way to proceed to get an install up and running with graphics switching. I don't mind using open source GFX drivers as long as the basics work. Any help towards a solution is greatly appreciated.

  Read the article

• problem using pydoc in python

  - by rohanag

  I'm using pydoc in python 2.7.3 to generate documentation for a file called PreProcessingAPI.py which contains a class called PreProcessingAPI In PreProcessingAPI.py, I have the following import in the beginning of the file: from __future__ import division from re import * from nltk.stem import porter The problem is, in the documentation generated by pydoc, nltk.stem.porter is shown as a Module. There is also a DATA heading with all sorts of variables I do not know about. Is there a way to avoid these variables and avoid showing nltk.stem.porter in the modules? I'm running the following command to generate documentation python pydoc.py -w PreProcessingAPI.py I've put the file pydoc.py in the directory containing my file. Here is the file generated: https://www.dropbox.com/s/4rb6ut99o25mwly/PreProcessingAPI.html

  Read the article

• What is the most effective way to add functionality to unfamiliar, structurally unsound code?

  - by Coder

  This is probably something everyone has to face during the development sooner or later. You have an existing code written by someone else, and you have to extend it to work under new requirements. Sometimes it's simple, but sometimes the modules have medium to high coupling and medium to low cohesion, so the moment you start touching anything, everything breaks. And you don't feel that it's fixed correctly when you get the new and old scenarios working again. One approach would be to write tests, but in reality, in all cases I've seen, that was pretty much impossible (reliance on GUI, missing specifications, threading, complex dependencies and hierarchies, deadlines, etc). So everything sort of falls back to good ol' cowboy coding approach. But I refuse to believe there is no other systematic way that would make everything easier. Does anyone know a better approach, or the name of the methodology that should be used in such cases?

  Read the article

• Rewriting URL to get Wordpress "permalink" type URL

  - by user1472575

  I would like my users to enter http://mywebsite.com/the-name-of-my-post and have the following execute: http://mywebsite.com/Default.aspx#&&the-name-of-my-post ...which is what the ScriptManager generates at runtime. I have created an ASP.NET site to replace a Wordpress site that creates "permalinks". This site was around for about 2 years so there are lots of bookmarks and references to these "permalinks" on the search engines etc. Also are there any modules I have to include in my website to get this to work? Is there any configuration that I have to ask my hosting company to make so that this works?

  Read the article

• Oracle Applications Guidance for Exalogic

  - by james.bayer

  Exalogic is continuing to help Oracle deliver on the tagline “Hardware and Software – Engineered to Work Together”.  My Oracle Support article ID 1302529.1 was just posted and enumerates various Oracle Applications versions that are recommended for deployment on Exalogic.  Please access the note via My Oracle Support for the details.  These applications currently include: Oracle Applications such as E-Business Suite, Siebel, PeopleSoft Enterprise, and JD Edwards EnterpriseOne Utilities Applications including Mobile Workforce Management, Meter Data Management, and Customer Care and Billing Oracle Retail Applications Merchandising Operations Management and Merchandising Planning & Optimization modules The reference video below offers a great explanation for how Exalogic can be an ideal platform for Oracle software including Oracle Applications.

  Read the article

• How to setup ATI Mobility Radeon HD 4650?

  - by Thi An

  I'm currently using Ubuntu 12.04 64bit. After installing ATI/AMD proprietary FGLRX graphics drivers via Additional Drivers, I checked the status of my VGA card using lspci -v. Here's the output: 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0456 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon As mentioned in the title, my VGA card is 1GB and yet my computer only recognizes 256MB. My question is: "How to make my computer fully recognize the capacity of my ATI Mobility Radeon HD 4650 (1GB)?"

  Read the article

• Better drivers for SiS 650/740 integrated video?

  - by Bart van Heukelom

  I installed Xubuntu 10.10 on an old box today and the graphical performance is horrid. According to lspci, the video card is this: 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8081 Flags: 66MHz, medium devsel, IRQ 11 BIST result: 00 Memory at f0000000 (32-bit, prefetchable) [size=128M] Memory at e7800000 (32-bit, non-prefetchable) [size=128K] I/O ports at d800 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel modules: sisfb Is there a way to make it faster? Alternative drivers? The additional drivers tool shows nothing. I'm specifically interested in improving Java's Java2D rendering speed, because I'll be running a "stat screen" written in that language on it.

  Read the article

• Replace Broadcom "wl" driver with "b43"

  - by Laszlo Boros

  I'm using Ubuntu 10.04.4 LTS, and in my laptop there is a Broadcom BCM4312 wlan card. lspci output: 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Subsystem: Broadcom Corporation Device 04b5 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 81-ac-1d-ff-ff-12-54-92 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb So as you can see, the current (and default) driver is wl - installed with jockey. But I have another Ubuntu based distribution on my laptop (BackTrack linux), which is also 10.04, but it has the b43 driver installed and the overall performance is MUCH better. So I would like to install it on this OS too, but even google didn't help me. So my question is how to install the latest b43 driver on my Ubuntu?

  Read the article

• How to import ejb project classes into web project on eclipse?

  - by Jhonnytunes

  I have 3 projects on eclipse, maven ejb project, maven wicket webapp project and a enterprise application project that includes ejb and web I mentioned before, as modules. But my question is, How from my web project can I use classes on the ejb project. Lets say ClassA is on the ejb project and I want to say from web project: ClassA cl = new ClassA. I wont be allowed since web project doesnt have ClassA but ejb project. I want to use ejb project as a Business Logic, JPA part. Also I want to include here some not beans classes that I want to use from the web. Dont know if its possible. The web project goes without Business logic, just the wicket pages calling ejb, and using ther classes. Im new in the EE world. Never made an ear file including a war and ejb jar for deploying it on Glassfish. Thanks in advanced.

  Read the article

• Writing Large Portions Of Code Then Debugging?

  - by The Floating Brain

  Lately I have been writing a game engine, and I have been writing a lot of "foundation stuff" (standard interfaces, modules, a message system ect.), but I have noticed a pattern, a lot of the stuff is interdependent and I can not debug until everything is done, hence I do not debug for about 3 to 5 hours at a time. I am wondering if this is an acceptable practice for this part of the project, and if not, if anyone can give me some advice? -----Update-----: I downloaded some code metrics tools, and my programs cyclomatic complexity is 1.52 which as I understand it is good, and should correlate to high cohesion, if I am wrong please correct me/

  Read the article

• Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

  - by Victor S

  I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >