Search Results

Search found 41598 results on 1664 pages for 'segmentation fault'.

Page 68/1664 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• monit configuration for php-fpm

  - by Adam Jimenez

  I'm struggling to find a monit config for php-fpm that works. This is what I've tried: ### Monitoring php-fpm: the parent process. check process php-fpm with pidfile /var/run/php-fpm/php-fpm.pid group phpcgi # phpcgi group start program = "/etc/init.d/php-fpm start" stop program = "/etc/init.d/php-fpm stop" ## Test the UNIX socket. Restart if down. if failed unixsocket /var/run/php-fpm.sock then restart ## If the restarts attempts fail then alert. if 3 restarts within 5 cycles then timeout depends on php-fpm_bin depends on php-fpm_init ## Test the php-fpm binary. check file php-fpm_bin with path /usr/sbin/php-fpm group phpcgi if failed checksum then unmonitor if failed permission 755 then unmonitor if failed uid root then unmonitor if failed gid root then unmonitor ## Test the init scripts. check file php-fpm_init with path /etc/init.d/php-fpm group phpcgi if failed checksum then unmonitor if failed permission 755 then unmonitor if failed uid root then unmonitor if failed gid root then unmonitor But it fails because there is no php-fpm.sock (Centos 6)

  Read the article

• Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

  - by Deleted

  I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

  Read the article

• Upgrading PHP on MacOSX without config_vars.mk ?

  - by Ken

  Hi everyone, I want to upgrade my php version running on MAMP to 5.3. I've copied the ./configure statement from phpinfo() and downloaded the 5.3 branch source i wish to compile. However, when i try to compile it i get an error about a missing config_vars.mk file from apxs. How can i solve this issue if i do not have the config_vars.mk? can one be deprecated? can i copy the one from the stock apache that comes installed on OS X (SL)? What will happen if i remove --with-apxs from the configure line? Thanks in advance for any help. It is greatly appreciated. Ken.

  Read the article

• Virtual SMTP not sending mails

  - by DoStuffZ

  Hi I have been googling for the better part of the last two hours without finding any conclusion. My mails are not being sent from the production webserver. If I stop/start the Virtual SMTP I get this in the event log: No usable TLS server certificate for SMTP virtual server instance '1' could be found. TLS will be disabled for this virtual-server. We recently updated the webapplication running and I assume something went amiss during that. Googling the message straight up gave me a list that just as well could have been in greek. I found a security certificate on the server, installing that gave no change. I basicly played russian roulette with the certificate file (.cer), though I was somewhat certain it would not have a negative effect. (Russian roulette with a 6 chamber gun and 2 bullets.) I found a .pfx in our local documentation folder, though I'm far from certain that to have a positive effect. (6 chambers and 5 bullets). I found a site describing how the Virtual SMTP - Properties - Access - should have a button saying Certificates. I have a text saying "Did not find any TLS certificates" and a grayed out tick box saying "Require TLS certificate". I found the TLS being SSL ver3.1+ (3.1-3.3). So question goes - How do I enable the SMTP to once again send emails, like before.

  Read the article

• Cisco Unified Communication integration for Microsoft Lync crashes on Remote Desktop services 2008 R2!

  - by user66267

  Hi everybody i have deployed office communication server 2007 R2 and communicator 2007 R2 and i made integration with Cisco Unified Communication Manager 7.1 in my network, i also use Remote Desktop Servers 2008 R2 for Thin Client Computers, now that i installed Cisco UC integration client for communicator 2007 R2 (Ver. 8.0.3) or Cisco UC integration client for Microsoft Lync that works fine on PCs but Not on Remote Desktop Servers. i have Three Remote Desktop Servers in a Farm with loadbalancing enabled. all other applications on these RDP servers works fine for 120 active users. some times when i start Cisco UC client on Remote Desktop servers i get the following error: "The Port Reguired for callbacks from Cisco unified client framework could not be read, please retry" i also found the folowing log so i think that may be the cause: 2011-01-05 08:24:21,489 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.SingleInstanceManager] [SingleInstanceManager.acquireMutex(0)] - Acquiring Mutex... 2011-01-05 08:24:21,512 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.IPC.PipeServer] [PipeServer.start(0)] - Starting Pipe Server 2011-01-05 08:24:21,516 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.SingleInstanceManager] [SingleInstanceManager.acquireMutex(0)] - Mutex Acquired... 2011-01-05 08:24:25,437 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.process.ProcessUtil] [ProcessUtil.isOtherPRTProcessRunning(0)] - No other instance(s) of ProblemReportingTool.exe found 2011-01-05 08:24:25,438 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - ******************************* 2011-01-05 08:24:25,439 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - **Launching CUCSF Problem Reporting Tool v0.8.3.2** 2011-01-05 08:24:25,440 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - ******************************* 2011-01-05 08:24:25,441 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - Raw input: -reason=Launched by the user from CUCIMOC ver 8.5.105.17095 -file=C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt 2011-01-05 08:24:25,445 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - Current culture: English (United States) 2011-01-05 08:24:25,448 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.init(0)] - Loading string resources from file 2011-01-05 08:24:25,455 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.context.CLIUtil] [CLIUtil.parse(0)] - Argument -reason Launched by the user from CUCIMOC ver 8.5.105.17095 received 2011-01-05 08:24:25,456 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.context.CLIUtil] [CLIUtil.parse(0)] - Argument -file C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt received 2011-01-05 08:24:25,457 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.startup(0)] - Launching GUI... 2011-01-05 08:24:25,536 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PROG.PleaseWaitText from resource file 2011-01-05 08:24:25,545 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.OKButtonText from resource file 2011-01-05 08:24:25,548 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.CancelButtonText from resource file 2011-01-05 08:24:25,549 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.ErrorMsgText1 from resource file 2011-01-05 08:24:25,549 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.Title from resource file 2011-01-05 08:24:25,552 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.WindowTitle from resource file 2011-01-05 08:24:25,553 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.AgreeText from resource file 2011-01-05 08:24:25,553 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyText from resource file 2011-01-05 08:24:25,554 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyTitle from resource file 2011-01-05 08:24:25,555 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyLinkText from resource file 2011-01-05 08:24:25,555 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.DescriptionTitle from resource file 2011-01-05 08:24:25,629 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager..ctor(0)] - Starting SysInfoManager... 2011-01-05 08:24:25,634 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: systeminfo.exe 2011-01-05 08:24:25,669 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: tasklist.exe 2011-01-05 08:24:25,672 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: ipconfig.exe 2011-01-05 08:24:25,676 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: netstat.exe 2011-01-05 08:24:25,684 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: net.exe 2011-01-05 08:24:25,926 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchHardwareInfoThread(0)] - Launching worker thread: HardwareInfo 2011-01-05 08:24:25,928 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getHardWareInfo(0)] - Gathering CPU data 2011-01-05 08:24:26,149 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchCSFDirectoryInfoThread(0)] - Gathering CSF Directory Listing 2011-01-05 08:24:26,153 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [CSFDirectoryInfo.getCSFInstallPath(0)] - Retrieving CSF Install Directory 2011-01-05 08:24:26,159 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [CSFDirectoryInfo.getCSFInstallPath(0)] - CSF Install Path: C:\Program Files (x86)\Common Files\Cisco Systems\Client Services Framework 2011-01-05 08:24:26,162 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchWMIInfoThread(0)] - Launching worker thread: WMIInfo 2011-01-05 08:24:26,164 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Audio info... 2011-01-05 08:24:26,168 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchRegistryAndEnvironmentalVarInfoThread(0)] - Launching worker thread: Registry & Environment Variables 2011-01-05 08:24:26,173 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Cisco Systems, Inc.\Client Services Framework\AdminData\ 2011-01-05 08:24:26,180 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Policies\Cisco Systems, Inc.\Client Services Framework\AdminData\ 2011-01-05 08:24:26,182 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Cisco Systems, Inc.\Unified Communications\CUCSF 2011-01-05 08:24:26,183 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment 2011-01-05 08:24:26,184 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6 2011-01-05 08:24:26,186 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6.0_17 2011-01-05 08:24:26,188 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6.0_17\MSI 2011-01-05 08:24:26,190 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.gatherRegistryAndEnvInfo(0)] - Gathering Environment Variables data 2011-01-05 08:24:26,283 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Video driver info... 2011-01-05 08:24:26,750 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.writeFile(0)] - Creating file: DirectoryInfo.txt 2011-01-05 08:24:26,759 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Monitor info... 2011-01-05 08:24:34,483 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.gatherFiles(0)] - Config Dir C:\Users\m.sadeghi\AppData\Roaming\Cisco\Unified Communications\ 2011-01-05 08:24:34,530 [WARN ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addFile(0)] - C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt not found 2011-01-05 08:24:34,561 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addSystemInfo(0)] - Waiting for worker threads... 2011-01-05 08:24:38,180 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getHardWareInfo(0)] - Gathering Resolution data 2011-01-05 08:24:55,565 [ERROR] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addSystemInfo(0)] - One or more worker threads have not returned in a timely manner. Forcing quit. 2011-01-05 08:24:55,568 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.writeFile(0)] - Creating file: SystemInfo.txt 2011-01-05 08:24:55,577 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Checking for files to be excluded 2011-01-05 08:24:55,578 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: d11bfd8f-9745-41db-a35b-200389e65583.dat 2011-01-05 08:24:55,579 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: cacerts 2011-01-05 08:24:55,580 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.2639.20110103081119+0330.wav 2011-01-05 08:24:55,581 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.farhad.20101224165510+0330.wav 2011-01-05 08:24:55,581 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.postmaster.20101224165906+0330.wav 2011-01-05 08:24:55,582 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: VoicemailBeep.wav 2011-01-05 08:24:55,583 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: secModeNone 2011-01-05 08:24:55,586 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Preparing to create zip file... 2011-01-05 08:24:55,588 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - 60 files found 2011-01-05 08:24:55,589 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying .CSFExit.loc to temp folder. 2011-01-05 08:24:55,595 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSF.loc to temp folder. 2011-01-05 08:24:55,597 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CsfAddress.dat to temp folder. 2011-01-05 08:24:55,600 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSFLogSetting.dat to temp folder. 2011-01-05 08:24:55,634 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSFSecurityKey.dat to temp folder. 2011-01-05 08:24:55,637 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CommunicationHistory.xml to temp folder. 2011-01-05 08:24:55,641 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying MehdiSadeghi.cnf.xml to temp folder. 2011-01-05 08:24:55,751 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying jtapi.jar to temp folder. 2011-01-05 08:24:55,812 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi.index to temp folder. 2011-01-05 08:24:55,820 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi01.log to temp folder. 2011-01-05 08:24:55,887 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi02.log to temp folder. 2011-01-05 08:24:55,968 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi03.log to temp folder. 2011-01-05 08:24:55,972 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi04.log to temp folder. 2011-01-05 08:24:56,008 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi05.log to temp folder. 2011-01-05 08:24:56,038 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi06.log to temp folder. 2011-01-05 08:24:56,079 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi07.log to temp folder. 2011-01-05 08:24:56,100 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi08.log to temp folder. 2011-01-05 08:24:56,140 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi09.log to temp folder. 2011-01-05 08:24:56,215 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi10.log to temp folder. 2011-01-05 08:24:56,296 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log to temp folder. 2011-01-05 08:24:56,319 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.1 to temp folder. 2011-01-05 08:24:56,498 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.2 to temp folder. 2011-01-05 08:24:56,708 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.3 to temp folder. 2011-01-05 08:24:56,912 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.4 to temp folder. 2011-01-05 08:24:57,105 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.5 to temp folder. 2011-01-05 08:24:57,292 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.6 to temp folder. 2011-01-05 08:24:57,505 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying tracker.log to temp folder. 2011-01-05 08:24:57,523 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VideoEngineEncryptedTrace.txt to temp folder. 2011-01-05 08:24:57,542 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VoiceEngineDebugTrace.txt to temp folder. 2011-01-05 08:24:57,545 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VoiceEngineTrace.txt to temp folder. 2011-01-05 08:24:57,548 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying operationreport.log to temp folder. 2011-01-05 08:24:57,551 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying voicemailbox.dat to temp folder. 2011-01-05 08:24:57,554 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying voicemailfolder.dat to temp folder. 2011-01-05 08:24:57,558 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying UIPrefs.xml to temp folder. 2011-01-05 08:24:57,562 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log to temp folder. 2011-01-05 08:24:57,569 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.1 to temp folder. 2011-01-05 08:24:57,752 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.10 to temp folder. 2011-01-05 08:24:58,099 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.2 to temp folder. 2011-01-05 08:24:58,302 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.3 to temp folder. 2011-01-05 08:24:58,517 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.4 to temp folder. 2011-01-05 08:24:58,697 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.5 to temp folder. 2011-01-05 08:24:58,899 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.6 to temp folder. 2011-01-05 08:24:59,100 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.7 to temp folder. 2011-01-05 08:24:59,303 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.8 to temp folder. 2011-01-05 08:24:59,500 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.9 to temp folder. 2011-01-05 08:24:59,895 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Cisco.ClickToCall.Common.Core.dll.config to temp folder. 2011-01-05 08:24:59,915 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying ClickToCall.pref to temp folder. 2011-01-05 08:24:59,918 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoClickToCall.dll.config to temp folder. 2011-01-05 08:24:59,928 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoClickToCallContacts.dll.config to temp folder. 2011-01-05 08:24:59,948 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoPersonName.dll.config to temp folder. 2011-01-05 08:24:59,980 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying userData.properties to temp folder. 2011-01-05 08:24:59,988 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying userData.properties.backup to temp folder. 2011-01-05 08:24:59,990 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying cisco-uc-client.log4net.config to temp folder. 2011-01-05 08:24:59,994 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying cisco-uc-tab.log4net.config to temp folder. 2011-01-05 08:25:00,011 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying LocalSettings.xml to temp folder. 2011-01-05 08:25:00,025 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Description.txt to temp folder. 2011-01-05 08:25:00,028 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying LaunchInfo.txt to temp folder. 2011-01-05 08:25:00,031 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying DirectoryInfo.txt to temp folder. 2011-01-05 08:25:00,034 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying SystemInfo.txt to temp folder. 2011-01-05 08:25:00,036 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying csf-prt.log to temp folder.

  Read the article

• Task Scheduler not running .bat or .vbs successfully

  - by Django Reinhardt

  Hi there, got this weird problem, which will hopefully have an obvious solution for some enlightened soul: We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs script stopped successfully executing... but oddly it worked fine when ran manually! The error given in these circumstances was always "Timeout". We thought we try a little creative thinking, and run the .vbs another way: Via a .bat file. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file is nothing more than... CScript "C:\location\script.vbs" > Log.txt But the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The log.txt file says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• Configuring Cisco 877W router from scratch for DHCP, WiFi, ADSL2+, NAT

  - by David M Williams

  Hi all, I apologise if this is a BIG question but I am quite lost with the Cisco IOS. I know what I want to achieve just not how to do it :( I have a Cisco 877W router with 4 FastEthernet interfaces, 1 ATM interface and 1 802.11 Radio. I want to set it up for a small network and am trying to construct a configuration below. I was using Google to try and flesh it out but I think I need help and guidance from actual experts! If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software Here's what I have so far, which hopefully outlines clearly enough what I am wanting to do. The bits in angle brackets are placeholders (eg the secret password). ! ! Set router hostname ! hostname Shazam ! ! Set usernames and passwords ! username david privilege 15 secret 0 <PASSWORD> enable secret <SECRETPASSWORD> ! ! Configure SSH and telnet access ! line vty 0 4 privilege level 15 login local transport input telnet ssh ! ! Local logging ! logging buffered 51200 warning ! ! Set date and time for NSW, Australia (GMT +10h) ! ! ! Set router IP address to 192.168.1.1 on FastEthernet0 port ! interface FastEthernet0 ip address 192.168.1.1 255.255.255.0 no shut ip nat inside ! ! Forward any unknown DNS requests to Google ! ip dns server ip name-server 8.8.8.8 ip name-server 8.8.4.4 ! ! Set up DHCP ! DHCP pool covers 192.168.1.100 - .199 ! Set gateway and DNS server to be the router, ie 192.168.1.1 ! service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool <DHCPPOOLNAME> network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ! ! DHCP reservations ! ! Assign IP address 192.168.1.105 to MAC address 00-21-5D-2F-58-04 ! ! Configure ADSL2 connection details ! interface atm dsl operating-mode adsl2+ ! ! Set up NAT rules ! ! Forward port 35394 to 192.168.1.105 ! ! Set up WiFi ! ! SSID visible, WPA2 security, Pre-shared key I'm hoping most of this is boiler-plate stuff to you guys. I'm keen to not just get a working script but to actually understand it also. Unfortunately, I'm finding the Cisco reference material online very complex. Thank you!

  Read the article

• Options for PCI-DSS 11.5 - Deploy file integrity monitoring software

  - by dialt0ne

  I'm looking for options to be compliant with PCI-DSS section 11.5 for some servers I manage at the datacenter. There are several servers (less than 20) and they are mostly CentOS5, but there are some RHEL4 and Solaris9 Sparc. I believe Tripwire, Inc. is the leader in this area, but I am looking for additional options, both commercial and FOSS. Please include your experience reasons for using the software you recommend.

  Read the article

• SQL Error Log Message- 'ACCESS_METHODS_SCAN_RANGE_GENERATOR'

  - by Chirag

  One of our SQL2005 Enterprise Servers running on Win2003 became unresponsive and on reboot I saw these errors logged before it went down. Date 17/09/2009 10:16:22 Log SQL Server (Archive #1 - 17/09/2009 10:17:00) Source spid111 Message Timeout occurred while waiting for latch: class 'ACCESS_METHODS_SCAN_RANGE_GENERATOR', id 000000002A761760, type 4, Task 0x000000000E609EB8 : 14, waittime 600, flags 0x1a, owning task 0x000000000E6129B8. Continuing to wait. Anyone know what this error points or relates to? Many thanks in advance.

  Read the article

• Have I bricked my Sun V20z?

  - by David Mackintosh

  I have a small pile of Sun V20z computers. I was trying to update the SP and BIOS firmwares in order to bring them all up to the same standard -- mostly to get the updated (ie actually useful) SP functionality, and figured that I would just do the BIOS while I was at it. For three of the four computers, it worked perfectly. However after the BIOS update, the fourth system won't boot. I did this: batch05-mgmt $ sp get mounts Local Remote /mnt 10.16.0.8:/export/v20z batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Bios Flash Transmit Started Bios Flash Transmit Complete Bios Flash update Progress: 7 Bios Flash update Progress: 6 Bios Flash update Progress: 5 Bios Flash update Progress: 4 Bios Flash update Progress: 3 Bios Flash update Progress: 2 Bios Flash update Progress: 1 Bios Flash update complete batch05-mgmt $ platform set power state on This command may take several minutes. Please be patient. After an hour of waiting, it still won't start. The chassis powers on, but beyond the fans spinning up and the hardware POST of the drives, nothing appears to happen. So if I try to re-flash the BIOS (on the theory that maybe something went wrong): batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Error. The operation timed out. Have I bricked it?

  Read the article

• Apache 2.2 and FastCGI stops responding, warnings, crashes

  - by Brett

  I've seen this question posted a few times using a Google search, with no real answers. I have a multi-threaded FastCGI application running with Apache 2.2 on FreeBSD 7.2. There are a few issues with it, and I am unable to really figure out the source of the problem even after poking through a bunch of the mod_fastcgi source code. My FastCGI application gets anywhere from 2 to 15 or so hits per second, and mostly services a back-end API (the majority of web server usage is for this, and not actually serving content). Everything seems to work ok under normal conditions, but recently this problem has been becoming worse. It starts out with the FastCGI process manager apparently trying to close unneeded processes, sending them a SIGTERM signal. I catch the signal, clean up some stuff, and exit (by calling exit()) with status code 0. This process seems to result in three log messages in my httpd error log: [Tue Jun 01 14:03:31 2010] [warn] FastCGI: (dynamic) server "/home/program/wwwroot/domains/www.mydomain.com/cgi-bin/program.cgi" (pid 98182) termination signaled [Tue Jun 01 14:03:31 2010] [warn] FastCGI: (dynamic) server "/home/program/wwwroot/domains/www.mydomain.com/cgi-bin/program.cgi" (pid 98182) terminated by calling exit with status '0' [Tue Jun 01 14:03:31 2010] [warn] FastCGI: (dynamic) server "/home/program/wwwroot/domains/www.mydomain.com/cgi-bin/program.cgi" restarted (pid 98294) I am not sure why it says it is restarting the process, but in any case no core dump is ever generated so I do believe it is the FastCGI process manager doing it's thing. This makes sense because it begins to happen after the initial load increase from restarting Apache. Since it's down for a few seconds, it gets hit with a couple of hundred requests over the first few seconds it's running again (sometimes even hitting the upper limit of MAXCLIENTS in Apache), and this seems to be the process manager doing the work of spawning more processes to handle the increased load. So this all seems fine, but here is where things get weird. There are really two problems that I see. First, my multithreaded FastCGI process spawns 25 worker threads, and all seem to be used according to my internal log files (multiple processes are clearly using multiple threads to do work). However it seems that 3 or 4 FastCGI processes is not enough to handle the 5 to 15 hit per second load, even though the requests take about .02s or so to process internally. In order to be at all responsive, it seems I need 50 or more FastCGI processes, leading me to believe that FastCGI does not realize that my program is multithreaded. I've read the documentation at http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html and do not see any option pertaining to multithreaded-ness, and my internal code is more or less set up just like the examples provided by the FastCGI library. The second problem I am having is that once process termination has happened a bunch of times as above (and seemingly at random), I begin getting a lot of these messages in my error log: [Tue Jun 01 14:06:22 2010] [warn] (32)Broken pipe: FastCGI: write() to PM failed (ignore if a restart or shutdown is pending) The messages occur for about half the hits I get to the server, and it completely kills the responsiveness of my application - it seems FastCGI will look for a working "pipe" until it finds one, and fail to realize that whatever application it is trying to contact is dead. It does still work though, it's just incredibly unresponsive - sometimes taking up to 40 or so seconds to process a request. I recompiled mod_fastcgi with some extra debugging around the point of the error message, and it appears that the error happens when it tries to write() to the application. The call to write() fails with a -1 return code, and sets errno to EPIPE. I am noticing that the issue happens mostly when either a crash occurs in one of the FastCGI processes, or a bunch of them are seemingly terminated by the process manager. I haven't had any core dumps though, except for one, where the backtrace outputted by gdb is just a single call to free() at address 0x0000000000000000 with nothing else in the stack trace, so I don't really know what to make of that. I'm thinking it happens sometime after the SIGTERM signal is caught, maybe some global variable not being cleaned up properly or something.

  Read the article

• Errors Event 7888, 6102, 6641 MOSS

  - by Mayra Gonzalez

  I'm getting this errors on my Server. Version MOSS 2007, on Windows Server Standar 2008 and this message appear every minute. Next, you can find its descriptions: Can any one help me with this? Thanks Event ID 7888 A runtime exception was detected. Details follow. Message: Attempted to perform an unauthorized operation. Techinal Details: System.UnauthorizedAccessException: Attempted to perform an unauthorized operation. at Microsoft.Office.Server.Infrastructure.SharedServiceAccessControlList.AccessCheckThrowIfUnauthorized(SharedServiceRights rights) at Microsoft.Office.Server.Infrastructure.SharedServiceAccessControlList.Microsoft.Office.Server.Administration.ISerializableSharedObject.GetObjectData(SharedObjectSerializationContext context) at Microsoft.Office.Server.Administration.SharedObjectFormatter.Serialize(XmlWriter writer, SharedObject sharedObject) at Microsoft.Office.Server.Administration.SharedObjectStore.PutObject(SharedObject sharedObject) at Microsoft.Office.Server.Administration.SharedObject.Update() at Microsoft.Office.Server.Infrastructure.SharedServiceAccessControlList.EnsureFullPermissionSet(String principalName) at Microsoft.Office.Server.Administration.SharedResourceProvider.SynchronizeSharedServiceAccessControlList() at Microsoft.Office.Server.Administration.SharedResourceProvider.Microsoft.Office.Server.Administration.ISharedComponent.Synchronize() Event ID 6641 The SSP Timer Job Distribution List Import Job was not run. Reason: Index was outside the bounds of the array. Technical Support Details: System.IndexOutOfRangeException: Index was outside the bounds of the array. at Microsoft.Office.Server.Utilities.WindowsSecurity.GetUserTokenFromCredentials(String userDomainName, String password, LogonType logonType) at Microsoft.Office.Server.Utilities.WindowsSecurity.GetUserTokenFromCredentials(String userDomainName, String password) at Microsoft.Office.Server.Administration.JobHandler.Execute(Object state, Boolean timedOut) Event ID 6102: LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server

  Read the article

• Webmin and/or port 10000 not working

  - by DisgruntledGoat

  I've recently installed Webmin on a Ubuntu server but I can't get it to work. I asked a recent question about saving iptables but it turns out you don't need to "save" iptables changes. Anyway, I still can't get Webmin working after opening the port up: iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It seems that either the command is not opening up port 10000, or there is a separate problem with Webmin. If I run iptables -L I see lines like the following, but no port 10000: ACCEPT tcp -- anywhere anywhere tcp dpt:5555 state NEW ACCEPT tcp -- anywhere anywhere tcp dpt:8002 state NEW ACCEPT tcp -- anywhere anywhere tcp dpt:9001 state NEW However, there is a line: ACCEPT tcp -- anywhere anywhere tcp dpt:webmin Any ideas why Webmin is not working? The IP address works fine and we can view web sites on the server, but https://[ip]:10000/ (or http) doesn't work.

  Read the article

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I've run setup-pstn which produces the following output trixbox1.localdomain ~]# setup-pstn -------------------------------------------------------------- Detecting PSTN cards and USB PSTN Devices -------------------------------------------------------------- Hardware present! STOPPING ASTERISK Asterisk Stopped STOPPING FOP SERVER FOP Server Stopped Unloading DAHDI hardware modules: done Loading DAHDI hardware modules: wct4xxp: [ OK ] wcte12xp: [ OK ] wct1xxp: [ OK ] wcte11xp: [ OK ] wctdm24xxp: [ OK ] opvxa1200: [ OK ] wcfxo: [ OK ] wctdm: [ OK ] wcb4xxp: [ OK ] wctc4xxp: [ OK ] xpp_usb: [ OK ] Running dahdi_cfg: [ OK ] SETTING FILE PERMISSIONS Permissions OK STARTING ASTERISK Asterisk Started STARTING FOP SERVER FOP Server Started Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service dahdi_scan returns: dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV I Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV I location=PCI Bus 00 Slot 10 basechan=1 totchans=4 irq=209 type=analog port=1,FXO port=2,none port=3,none port=4,none And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook A cat of /etc/asterisk/dahdi.conf shows: [trixbox1.localdomain ~]# cat /etc/asterisk/dahdi-channels.conf ; Autogenerated by /usr/sbin/dahdi_genconf on Tue May 25 17:45:13 2010 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". I have one outbound route which uses the dial pattern 9|. and the Trunk Zap/1 and one Zap Trunk which uses Zap Identifier (trunk name): 1 and has no Dial Rules. The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. When running tail -f /var/log/asterisk/full and placing a call I get the following output: [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP TOS bits 184 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP CoS mark 5 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP TOS bits 136 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP CoS mark 6 [May 26 11:10:52] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:1] Macro("SIP/801-b7ce8c28", "user-callerid,SKIPTTL,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:1] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/801-b7ce8c28", "1?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:4] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:5] Set("SIP/801-b7ce8c28", "AMPUSERCIDNAME=Jona") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:7] Set("SIP/801-b7ce8c28", "AMPUSERCID=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:8] Set("SIP/801-b7ce8c28", "CALLERID(all)="Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:9] Set("SIP/801-b7ce8c28", "REALCALLERIDNUM=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/801-b7ce8c28", "0?Set(CHANNEL(language)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/801-b7ce8c28", "1?continue") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-user-callerid,s,20) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:20] NoOp("SIP/801-b7ce8c28", "Using CallerID "Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:2] Set("SIP/801-b7ce8c28", "_NODEST=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:3] Macro("SIP/801-b7ce8c28", "record-enable,801,OUT,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/801-b7ce8c28", "1?check") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-record-enable,s,4) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:4] AGI("SIP/801-b7ce8c28", "recordingcheck,20100526-111052,1274868652.1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck [May 26 11:10:52] VERBOSE[2858] logger.c: recordingcheck,20100526-111052,1274868652.1: Outbound recording not enabled [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28>AGI Script recordingcheck completed, returning 0 [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:5] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:4] Macro("SIP/801-b7ce8c28", "dialout-trunk,1,01483890915,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/801-b7ce8c28", "DIAL_TRUNK=1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/801-b7ce8c28", "0?sub-pincheck,s,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/801-b7ce8c28", "0?disabletrunk,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/801-b7ce8c28", "DIAL_NUMBER=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=tr") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/801-b7ce8c28", "OUTBOUND_GROUP=OUT_1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/801-b7ce8c28", "1?nomax") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s,9) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/801-b7ce8c28", "0?skipoutcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/801-b7ce8c28", "outbound-callerid,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/801-b7ce8c28", "0?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/801-b7ce8c28", "1?normcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,6) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/801-b7ce8c28", "USEROUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/801-b7ce8c28", "EMERGENCYCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/801-b7ce8c28", "TRUNKOUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/801-b7ce8c28", "1?trunkcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,12) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/801-b7ce8c28", "0?AGI(fixlocalprefix)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/801-b7ce8c28", "OUTNUM=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/801-b7ce8c28", "custom=DAHDI/1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/801-b7ce8c28", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/801-b7ce8c28", "dialout-trunk-predial-hook,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/801-b7ce8c28", "0?bypass,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/801-b7ce8c28", "0?customtrunk") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/801-b7ce8c28", "DAHDI/1/01483890915,300,") in new stack [May 26 11:10:52] WARNING[2858] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) [May 26 11:10:52] VERBOSE[2858] logger.c: == Everyone is busy/congested at this time (1:0/0/1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:20] Goto("SIP/801-b7ce8c28", "s-CHANUNAVAIL,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/801-b7ce8c28", "1?noreport") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/801-b7ce8c28", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:5] Macro("SIP/801-b7ce8c28", "outisbusy,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:1] Playback("SIP/801-b7ce8c28", "all-circuits-busy-now,noanswer") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'all-circuits-busy-now.ulaw' (language 'en') [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:2] Playback("SIP/801-b7ce8c28", "pls-try-call-later,noanswer") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'pls-try-call-later.ulaw' (language 'en') [May 26 11:10:54] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/801-b7ce8c28' in macro 'outisbusy' [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (from-internal, 901483890915, 5) exited non-zero on 'SIP/801-b7ce8c28' [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [h@from-internal:1] Macro("SIP/801-b7ce8c28", "hangupcall") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/801-b7ce8c28", "vw") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("SIP/801-b7ce8c28", "1?skiprg") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,6) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("SIP/801-b7ce8c28", "1?skipblkvm") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,9) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("SIP/801-b7ce8c28", "1?theend") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,11) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/801-b7ce8c28' in macro 'hangupcall' [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/801-b7ce8c28' I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

• Proftpd on Ubuntu - Create directory permission denied (550 ) after upgrade to 9.10

  - by Ian

  Hi all, I am having problems with ProFTPD since I upgraded to Ubuntu 9.10 from 9.04. When I login as my ftp user (userftp) in the terminal I can create dirs fine in their home dir. But when I use ftp as this user permission is denied (550 asl: permission denied) when I try and do the same operation (creating a dir). Uploading files is fine though. I am using the same config for proftpd as I was before, I can't understand what's wrong. Any help appreciated! Config follows: Include /etc/proftpd/modules.conf UseIPv6 on IdentLookups off ServerName "whatever" ServerType inetd DeferWelcome off MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ DefaultRoot ~ Port 21 <IfModule mod_dynmasq.c> </IfModule> MaxInstances 8 User proftpd Group nogroup Umask 022 022 AllowOverwrite on TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # My additions # MaxLoginAttempts 5 # # My user config # #VALID LOGINS <Limit LOGIN> AllowUser userftp DenyALL </Limit> <Directory /home/userftp> Umask 022 022 AllowOverwrite off <Limit MKD STOR DELE XMKD RNRF RNTO RMD XRMD> DenyAll </Limit> </Directory> <Directory /home/userftp/upload/> Umask 022 022 AllowOverwrite on <Limit READ> DenyAll </Limit> <Limit STOR CWD MKD RMD DELE> AllowAll </Limit> </Directory>

  Read the article

• Setting up Group Managed Service Account on Windows Server 2012 R2

  - by Moo MinTroll

  I have a Windows 2012 R2 domain controller called cox.win.testlab. I have set up a group of hosts where I would like to use a gMSA (Group Managed Service Account). This group is called SQLManagedHosts. I created the account by following these steps in Powershell on the domain controller: PS C:\Windows\system32> Add-KdsRootKey -EffectiveTime ((get-date).addhours(-10)) Guid ---- 9b68b1e7-db76-c4e4-4978-63c2965e5596 PS C:\Windows\system32> New-ADServiceAccount mSQL -DNSHostName cox.win.testlab -PrincipalsAllowedToRetrieveManagedPassword SQLManagedHosts PS C:\Windows\system32> Get-ADServiceAccount msql DistinguishedName : CN=mSQL,CN=Managed Service Accounts,DC=win,DC=testlab Enabled : True Name : mSQL ObjectClass : msDS-GroupManagedServiceAccount ObjectGUID : cf9df74a-38e0-4d7a-856e-9af882b08800 SamAccountName : mSQL$ SID : S-1-5-21-3443997112-87545443-1733229669-1602 UserPrincipalName : On one of the hosts listed in SQLManagedHosts, I ran: PS C:\Windows\system32> Install-ADServiceAccount msql Install-ADServiceAccount : Cannot install service account. Error Message: 'An unspecified error has occurred'. At line:1 char:1 + Install-ADServiceAccount msql + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : WriteError: (mSQL:String) [Install-ADServiceAccount], ADException + FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:InstallServiceAcccountFailure,Microsoft.ActiveDirectory.Management.Commands.InstallADServiceAccount Any ideas why it might be failing? All servers involved are Windows Server 2012 R2.

  Read the article

• apache2-mpm-itk doesn't kill his processes

  - by rtm

  Why apache doesnt kill his processes ? Im using fresh ubuntu 10.04 64bit with php 5.2 from karmic I've istalled 5.2 using this this script phpinfo could me found here http://www.m-23.ru/2.php apache2 settings: StartServers 5 MinSpareServers 5 MaxSpareServers 30 MaxClients 30 MaxRequestsPerChild 200 I've tried strace -p and get the following sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0^C Process 16839 detached htop displays this picture 3887 vu2032 20 0 337M 11644 2116 R 78.0 0.1 1:00.30 /usr/sbin/apache2 -k start 3891 vu2017 20 0 337M 11308 1828 R 64.0 0.1 0:58.64 /usr/sbin/apache2 -k start 3893 vu2032 20 0 337M 11652 2120 R 57.0 0.1 1:01.35 /usr/sbin/apache2 -k start 3896 vu2033 20 0 337M 11248 1776 R 57.0 0.1 0:36.78 /usr/sbin/apache2 -k start 3842 vu2033 20 0 337M 11244 1772 R 51.0 0.1 2:00.18 /usr/sbin/apache2 -k start 3857 vu2025 20 0 337M 11288 1812 R 49.0 0.1 1:38.70 /usr/sbin/apache2 -k start All sites works under php

  Read the article

• How to setup a static multicast ARP entry with Cisco SG300?

  - by Fredrik Hedberg

  We're running a Microsoft NLB cluster in multicast mode as a loadbalancer. Using our old Cisco IOS switches we propagate access to the cluster to our branches using a static ARP entry in the core router: arp 10.20.1.226 03bf.0a14.01e2 ARPA But how does one solve this using non-IOS based Cisco hardware such as the SG300 series? Adding a static ARP entry results in an error message telling the user that the hardware address needs to be a valid unicast MAC address.

  Read the article

• How to install SQL Server 2005 Configuration Manager without installing SQL Server Management Studio

  - by Arnold Zokas

  Hi, I need to configure SQL Server aliases on a public-facing production server. To do that, I need to install SQL Server Configuration Manager. I was not able to find a standalone installer for that, so I am having to install SQL Server 2005 Client Components. This approach is not ideal as we don't want to have SSMS on an public-facing production server. Is there a way to install SQL Server 2005 Configuration Manager without installing SQL Server Management Studio? Thanks, Arnold

  Read the article

• php-fpm: very high server load

  - by Derp Derpington

  Since today my webserver (nginx + php-fpm + mysql on a VPS) is very slow. htop says: 1 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Tasks: 63 total, 13 running 2 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Load average: 11.67 10.95 6.95 3 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Uptime: 00:18:40 4 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 5 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 6 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Mem[||||||||||| 137/1280MB] Swp[ 0/0MB] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 6802 www 20 0 76232 12320 5716 R 27.0 0.9 0:06.48 php-fpm: pool www 7048 www 20 0 75200 12136 5700 R 52.0 0.9 0:03.64 php-fpm: pool www 6699 www 20 0 74176 11124 5700 R 27.0 0.8 0:07.36 php-fpm: pool www 7029 www 20 0 73668 10380 5676 R 42.0 0.8 0:03.52 php-fpm: pool www 6995 www 20 0 76228 12456 5644 R 42.0 1.0 0:03.98 php-fpm: pool www 6858 www 20 0 74172 10684 5620 R 35.0 0.8 0:05.52 php-fpm: pool www 6998 www 20 0 75200 12072 5620 R 37.0 0.9 0:03.95 php-fpm: pool www 7098 www 20 0 75200 12052 5616 R 42.0 0.9 0:02.33 php-fpm: pool www 7093 www 20 0 76228 12496 5612 R 37.0 1.0 0:03.02 php-fpm: pool www 7226 www 20 0 74692 11080 5588 R 32.0 0.8 0:00.66 php-fpm: pool www CPU: (cat /proc/cpuinfo | grep model) model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz I think a load of 10 and 100% cpu usage is not normal... How can i fix that?

  Read the article

• IIS 7.5, Multiple Application Pools, and URL Rewriting (403.18 -- Forbidden)

  - by Jerry Hewett

  Is there any way to configure IIS 7.5 to perform URL rewrites to different application pools on the same site without running into a 403.18 error? We're using Helicon ISAPI Rewrite 3 on IIS 6 and it's working like a charm. The root-level "application" is running under it's own application pool, and on IIS 6 we have no problems doing URL rewrites from that application pool to any one of the other four application pools. But when I copy the same server configuration information over to IIS 7.5 the URL rewrites to any of the other application pools fail with a "403.18 -- Forbidden" error. The weird bit is that the IIS 6 is not (at least as far as I can tell, by looking at the site Service configuration dialog) running under IIS 5 emulation mode, so somehow the rewrites aren't throwing 403.18 errors. So something must be different... but whatever it is, I sure haven't been able to figure it out. Btw, we're not married to Helicon ISAPI Rewrite. If there's another way to preserve our current rewrite configuration rules using another module or method I'd be more than happy to use it.

  Read the article

• Disable authentication on subfolder(s) of an ASP.NET app using windows authentication

  - by Bert Vandamme

  Hi, Is it possible to disable windows authentication on one or more subfolders of an ASP.net application using windows authentication?

  Read the article

• when using exchange 2010 it complains of not talking to Information Store service on exchange 2007

  - by ChrisMuench

  I am attempting to do an upgrade in my org from exchange 2007 to exchange 2010. I moved all the mailboxes and made sure my certificates were setup in exchange 2010. I then changed my ip forwarding rules to forward mail to my exchange 2010 box. I can receive email. I then powered off my exchange 2007 server. However now when I open my exchange 2010 console it is complaing of not being able to talk to the Information Store service on my exchange 2007 server. What is up? do I have to tell exchange somewhere "who" is the new exchange server? I'm confused. I hate it when software does it automatically. I want to force it to do something.

  Read the article

• Trying to run chrooted suPHP with UserDir, getting 500 server error

  - by Greg Antowski

  I've managed to get suPHP working fine with UserDir (i.e. PHP files run from the /home/$username/public_html) directory, but I can't get it to work when I chroot it to the user's home directory. I've been following this guide: http://compilefailure.blogspot.co.nz/2011/09/suphp-chroot-gotchas.html And adapting it to my needs. I'm not creating vhosts, I just want PHP scripts to be jailed to the user's home directory. I've gotten to the part where you use makejail and set up a symlink. However even with the symlink set up correctly, PHP scripts won't run. This is what's shown in the Apache error log: SoftException in Application.cpp:537: Could not execute script "/home/jimmy/public_html/test.php" [error] [client 127.0.0.1] Caused by SystemException in API_Linux.cpp:444: execve() for program "/usr/bin/php-cgi" failed: No such file or directory The thing is, if I try running either of the following commands in the terminal it works without any issues: /home/jimmy/usr/bin/php-cgi /home/jimmy/public_html/test.php /usr/bin/php-cgi /home/jimmy/public_html/test.php I've been trying for hours to get this going and documentation for this kind of stuff is almost non-existent. If anyone could help me out with this, I'd be extremely grateful.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >