Search Results

Search found 18249 results on 730 pages for 'real world haskell'.

Page 683/730 | < Previous Page | 679 680 681 682 683 684 685 686 687 688 689 690  | Next Page >

  • are C functions declared in <c____> headers guaranteed to be in the global namespace as well as std?

    - by Evan Teran
    So this is something that I've always wondered but was never quite sure about. So it is strictly a matter of curiosity, not a real problem. As far as I understand, what you do something like #include <cstdlib> everything (except macros of course) are declared in the std:: namespace. Every implementation that I've ever seen does this by doing something like the following: #include <stdlib.h> namespace std { using ::abort; // etc.... } Which of course has the effect of things being in both the global namespace and std. Is this behavior guaranteed? Or is it possible that an implementation could put these things in std but not in the global namespace? The only way I can think of to do that would be to have your libstdc++ implement every c function itself placing them in std directly instead of just including the existing libc headers (because there is no mechanism to remove something from a namespace). Which is of course a lot of effort with little to no benefit. The essence of my question is, is the following program strictly conforming and guaranteed to work? #include <cstdio> int main() { ::printf("hello world\n"); } EDIT: The closest I've found is this (17.4.1.2p4): Except as noted in clauses 18 through 27, the contents of each header cname shall be the same as that of the corresponding header name.h, as specified in ISO/IEC 9899:1990 Programming Languages C (Clause 7), or ISO/IEC:1990 Programming Languages—C AMENDMENT 1: C Integrity, (Clause 7), as appropriate, as if by inclusion. In the C + + Standard Library, however, the declarations and definitions (except for names which are defined as macros in C) are within namespace scope (3.3.5) of the namespace std. which to be honest I could interpret either way. "the contents of each header cname shall be the same as that of the corresponding header name.h, as specified in ISO/IEC 9899:1990 Programming Languages C" tells me that they may be required in the global namespace, but "In the C + + Standard Library, however, the declarations and definitions (except for names which are defined as macros in C) are within namespace scope (3.3.5) of the namespace std." says they are in std (but doesn't specify any other scoped they are in).

    Read the article

  • Problem with skipping empty cells while importing data from .xlsx file in asp.net c# application

    - by Eedoh
    Hi to all. I have a problem with reading .xlsx files in asp.net mvc2.0 application, using c#. Problem occurs when reading empty cell from .xlsx file. My code simply skips this cell and reads the next one. For example, if the contents of .xlsx file are: FirstName LastName Age John 36 They will be read as: FirstName LastName Age John 36 Here's the code that does the reading. private string GetValue(Cell cell, SharedStringTablePart stringTablePart) { if (cell.ChildElements.Count == 0) return string.Empty; //get cell value string value = cell.ElementAt(0).InnerText;//CellValue.InnerText; //Look up real value from shared string table if ((cell.DataType != null) && (cell.DataType == CellValues.SharedString)) value = stringTablePart.SharedStringTable.ChildElements[Int32.Parse(value)].InnerText; return value; } private DataTable ExtractExcelSheetValuesToDataTable(string xlsxFilePath, string sheetName) { DataTable dt = new DataTable(); using (SpreadsheetDocument myWorkbook = SpreadsheetDocument.Open(xlsxFilePath, true)) { //Access the main Workbook part, which contains data WorkbookPart workbookPart = myWorkbook.WorkbookPart; WorksheetPart worksheetPart = null; if (!string.IsNullOrEmpty(sheetName)) { Sheet ss = workbookPart.Workbook.Descendants<Sheet>().Where(s => s.Name == sheetName).SingleOrDefault<Sheet>(); worksheetPart = (WorksheetPart)workbookPart.GetPartById(ss.Id); } else { worksheetPart = workbookPart.WorksheetParts.FirstOrDefault(); } SharedStringTablePart stringTablePart = workbookPart.SharedStringTablePart; if (worksheetPart != null) { Row lastRow = worksheetPart.Worksheet.Descendants<Row>().LastOrDefault(); Row firstRow = worksheetPart.Worksheet.Descendants<Row>().FirstOrDefault(); if (firstRow != null) { foreach (Cell c in firstRow.ChildElements) { string value = GetValue(c, stringTablePart); dt.Columns.Add(value); } } if (lastRow != null) { for (int i = 2; i <= lastRow.RowIndex; i++) { DataRow dr = dt.NewRow(); bool empty = true; Row row = worksheetPart.Worksheet.Descendants<Row>().Where(r => i == r.RowIndex).FirstOrDefault(); int j = 0; if (row != null) { foreach (Cell c in row.ChildElements) { //Get cell value string value = GetValue(c, stringTablePart); if (!string.IsNullOrEmpty(value) && value != "") empty = false; dr[j] = value; j++; if (j == dt.Columns.Count) break; } if (empty) break; dt.Rows.Add(dr); } } } } } return dt; }

    Read the article

  • Returning JSON in CFFunction and appending it to layer is causing an error

    - by Mel
    I'm using the qTip jQuery plugin to generate a dynamic tooltip. I'm getting an error in my JS, and I'm unsure if its source is the JSON or the JS. The tooltip calls the following function: (sorry about all this code, but it's necessary) <cffunction name="fGameDetails" access="remote" returnType="any" returnformat="JSON" output="false" hint="This grabs game details for the games.cfm page"> <!---Argument, which is the game ID---> <cfargument name="gameID" type="numeric" required="true" hint="CFC will look for GameID and retrieve its details"> <!---Local var---> <cfset var qGameDetails = ""> <!---Database query---> <cfquery name="qGameDetails" datasource="#REQUEST.datasource#"> SELECT titles.titleName AS tName, titles.titleBrief AS tBrief, games.gameID, games.titleID, games.releaseDate AS rDate, genres.genreName AS gName, platforms.platformAbbr AS pAbbr, platforms.platformName AS pName, creviews.cReviewScore AS rScore, ratings.ratingName AS rName FROM games Inner Join platforms ON platforms.platformID = games.platformID Inner Join titles ON titles.titleID = games.titleID Inner Join genres ON genres.genreID = games.genreID Inner Join creviews ON games.gameID = creviews.gameID Inner Join ratings ON ratings.ratingID = games.ratingID WHERE (games.gameID = #ARGUMENTS.gameID#); </cfquery> <cfreturn qGameDetails> </cffunction> This function returns the following JSON: { "COLUMNS": [ "TNAME", "TBRIEF", "GAMEID", "TITLEID", "RDATE", "GNAME", "PABBR", "PNAME", "RSCORE", "RNAME" ], "DATA": [ [ "Dark Void", "Ancient gods known as 'The Watchers,' once banished from our world by superhuman Adepts, have returned with a vengeance.", 154, 54, "January, 19 2010 00:00:00", "Action & Adventure", "PS3", "Playstation 3", 3.3, "14 Anos" ] ] } The problem I'm having is every time I try to append the JSON to the layer #catalog, I get a syntax error that says "missing parenthetical." This is the JavaScript I'm using: $(document).ready(function() { $('#catalog a[href]').each(function() { $(this).qtip( { content: { url: '/gamezilla/resources/components/viewgames.cfc?method=fGameDetails', data: { gameID: $(this).attr('href').match(/gameID=([0-9]+)$/)[1] }, method: 'get' }, api: { beforeContentUpdate: function(content) { var json = eval('(' + content + ')'); content = $('<div />').append( $('<h1 />', { html: json.TNAME })); return content; } }, style: { width: 300, height: 300, padding: 0, name: 'light', tip: { corner: 'leftMiddle', size: { x: 40, y : 40 } } }, position: { corner: { target: 'rightMiddle', tooltip: 'leftMiddle' } } }); }); }); Any ideas where I'm going wrong? I tried many things for several days and I can't find the issue. Many thanks!

    Read the article

  • c++ templates: problem with member specialization

    - by ChAoS
    I am attempting to create a template "AutoClass" that create an arbitrary class with an arbitrary set of members, such as: AutoClass<int,int,double,double> a; a.set(1,1); a.set(0,2); a.set(3,99.7); std::cout << "Hello world! " << a.get(0) << " " << a.get(1) << " " << a.get(3) << std::endl; By now I have an AutoClass with a working "set" member: class nothing {}; template < typename T1 = nothing, typename T2 = nothing, typename T3 = nothing, typename T4 = nothing, typename T5 = nothing, typename T6 = nothing> class AutoClass; template <> class AutoClass<nothing, nothing, nothing, nothing, nothing, nothing> { public: template <typename U> void set(int n,U v){} }; template < typename T1, typename T2, typename T3, typename T4, typename T5, typename T6> class AutoClass: AutoClass<T2,T3,T4,T5,T6> { public: T1 V; template <typename U> void set(int n,U v) { if (n <= 0) V = v; else AutoClass<T2,T3,T4,T5,T6>::set(n-1,v); } }; and I started to have problems implementing the corresponding "get". This approach doesn't compile: template < typename T1, typename T2, typename T3, typename T4, typename T5, typename T6> class AutoClass: AutoClass<T2,T3,T4,T5,T6> { public: T1 V; template <typename U> void set(int n,U v) { if (n <= 0) V = v; else AutoClass<T2,T3,T4,T5,T6>::set(n-1,v); } template <typename W> W get(int n) { if (n <= 0) return V; else return AutoClass<T2,T3,T4,T5,T6>::get(n-1); } template <> T1 get(int n) { if (n <= 0) return V; else return AutoClass<T2,T3,T4,T5,T6>::get(n-1); } }; Besides, it seems I need to implement get for the <nothing, nothing, nothing, nothing, nothing, nothing> specialization. Any Idea on how to solve this?

    Read the article

  • [NHibernate and ASP.NET MVC] How can I implement a robust session-per-request pattern in my project,

    - by Guillaume Gervais
    I'm currently building an ASP.NET MVC project, with NHibernate as its persistance layer. For now, some functionnalities have been implemented, but only use local NHibernate sessions: each method that accessed the database (read or write) needs to instanciate its own NHibernate session, with the "using()" directive. The problem is that I want to leverage NHibernate's Lazy-Loading capabilities to improve the performance of my project. This implies an open NHibernate session per request until the view is rendered. Furthermore, simultaneous request must be supported (multiple Sessions at the same time). How can I achieve that as cleanly as possible? I searched the Web a little bit and learned about the session-per-request pattern. Most of the implementations I saw used some sort of Http* (HttpContext, etc.) object to store the session. Also, using the Application_BeginRequest/Application_EndRequest functions is complicated, since they get fired for each HTTP request (aspx files, css files, js files, etc.), when I only want to instanciate a session once per request. The concern that I have is that I don't want my views or controllers to have access to NHibernate sessions (or, more generally, NHibernate namespaces and code). That means that I do not want to handle sessions at the controller level nor the view one. I have a few options in mind. Which one seems the best ? Use interceptors (like in GRAILS) that get triggered before and after the controller action. These would open and close sessions/transactions. Is it possible in the ASP.NET MVC world? Use the CurrentSessionContext Singleton provided by NHibernate in a Web context. Using this page as an example, I think this is quite promising, but that still requires filters at the controller level. Use the HttpContext.Current.Items to store the request session. This, coupled with a few lines of code in Global.asax.cs, can easily provide me with a session on the request level. However, it means that dependencies will be injected between NHibernate and my views (HttpContext). Thank you very much!

    Read the article

  • OpenGL ES Polygon with Normals rendering (Note the 'ES!')

    - by MarqueIV
    Ok... imagine I have a relatively simple solid that has six distinct normals but actually has close to 48 faces (8 faces per direction) and there are a LOT of shared vertices between faces. What's the most efficient way to render that in OpenGL? I know I can place the vertices in an array, then use an index array to render them, but I have to keep breaking my rendering steps down to change the normals (i.e. set normal 1... render 8 faces... set normal 2... render 8 faces, etc.) Because of that I have to maintain an array of index arrays... one for each normal! Not good! The other way I can do it is to use separate normal and vertex arrays (or even interleave them) but that means I need to have a one-to-one ratio for normals to vertices and that means the normals would be duplicated 8 times more than they need to be! On something with a spherical or even curved surface, every normal most likely is different, but for this, it really seems like a waste of memory. In a perfect world I'd like to have my vertex and normal arrays have different lengths, then when I go to draw my triangles or quads To specify the index to each array for that vertex. Now the OBJ file format lets you specify exactly that... a vertex array and a normal array of different lengths, then when you specify the face you are rendering, you specify a vertex and a normal index (as well as a UV coord if you are using textures too) which seems like the perfect solution! 48 vertices but only 8 normals, then pairs of indexes defining the shapes' faces. But I'm not sure how to render that in OpenGL ES (again, note the 'ES'.) Currently I have to 'denormalize' (sorry for the SQL pun there) the normals back to a 1-to-1 with the vertex array, then render. Just wastes memory to me. Anyone help? I hope I'm missing something very simple here. Mark

    Read the article

  • Patterns for dynamic CMS components (event driven?)

    - by CitrusTree
    Sorry my title is not great, this is my first real punt at moving 100% to OO as I've been procedural for more years than I can remember. I'm finding it hard to understand if what I'm trying to do is possible. Depending on people's thoughts on the 2 following points, I'll go down that route. The CMS I'm putting together is quote small, however focuses very much on different types of content. I could easily use Drupal which I'm very comfortable with, but I want to give myself a really good reasons to move myself into design patterns / OO-PHP 1) I have created a base 'content' class which I wish to be able to extend to handle different types of content. The base class, for example, handles HTML content, and extensions might handle XML or PDF output instead. On the other hand, at some point I may wish to extend the base class for a given project completely. I.e. if class 'content-v2' extended class 'content' for that site, any calls to that class should actually call 'content-v2' instead. Is that possible? If the code instantiates an object of type 'content' - I actually want it to instantiate one of type 'content-v2'... I can see how to do it using inheritance, but that appears to involve referring to the class explicitly, I can't see how to link the class I want it to use instead dynamically. 2) Secondly, the way I'm building this at the moment is horrible, I'm not happy with it. It feels very linear indeed - i.e. get session details get content build navigation theme page publish. To do this all the objects are called 1-by-1 which is all very static. I'd like it to be more dynamic so that I can add to it at a later date (very closely related to first question). Is there a way that instead of my orchestrator class calling all the other classes 1-by-1, then building the whole thing up at the end, that instead each of the other classes can 'listen' for specific events, then at the applicable point jump in and do their but? That way the orchestrator class would not need to know what other classes were required, and call them 1-by-1. Sorry if I've got this all twisted in my head. I'm trying to build this so it's really flexible.

    Read the article

  • Getting the responseText from XMLHttpRequest-Object

    - by Sammy46
    I wrote a cgi-script with c++ to return the query-string back to the requesting ajax object. I also write the query-string in a file in order to see if the cgi script works correctly. But when I ask in the html document for the response Text to be shown in a messagebox i get a blank message. here is my code: js: <script type = "text/javascript"> var XMLHttp; if(navigator.appName == "Microsoft Internet Explorer") { XMLHttp = new ActiveXObject("Microsoft.XMLHTTP"); } else { XMLHttp = new XMLHttpRequest(); } function getresponse () { XMLHttp.open ("GET", "http://localhost/cgi-bin/AJAXTest?" + "fname=" + document.getElementById('fname').value + "&sname=" + document.getElementById('sname').value,true); XMLHttp.send(null); } XMLHttp.onreadystatechange=function(){ if(XMLHttp.readyState == 4) { document.getElementById('response_area').innerHTML += XMLHttp.readyState; var x= XMLHttp.responseText alert(x) } } </script> First Names(s)<input onkeydown = "javascript: getresponse ()" id="fname" name="name"> <br> Surname<input onkeydown = "javascript: getresponse();" id="sname"> <div id = "response_area"> </div> C++: int main() { QFile log("log.txt"); if(!log.open(QIODevice::WriteOnly | QIODevice::Text)) { return 1; } QTextStream outLog(&log); QString QUERY_STRING= getenv("QUERY_STRING"); //if(QUERY_STRING!=NULL) //{ cout<<"Content-type: text/plain\n\n" <<"The Query String is: " << QUERY_STRING.toStdString()<< "\n"; outLog<<"Content-type: text/plain\n\n" <<"The Query String is: " <<QUERY_STRING<<endl; //} return 0; } I'm happy about every advice what to do! EDIT: the output to my logfile works just fine: Content-type: text/plain The Query String is: fname=hello&sname=world I just noticed that if i open it with IE8 i get the query-string. But only on the first "keydown" after that IE does nothing.

    Read the article

  • [C++] std::string manipulation: whitespace, "newline escapes '\'" and comments #

    - by rubenvb
    Kind of looking for affirmation here. I have some hand-written code, which I'm not shy to say I'm proud of, which reads a file, removes leading whitespace, processes newline escapes '\' and removes comments starting with #. It also removes all empty lines (also whitespace-only ones). Any thoughts/recommendations? I could probably replace some std::cout's with std::runtime_errors... but that's not a priority here :) const int RecipeReader::readRecipe() { ifstream is_recipe(s_buffer.c_str()); if (!is_recipe) cout << "unable to open file" << endl; while (getline(is_recipe, s_buffer)) { // whitespace+comment removeLeadingWhitespace(s_buffer); processComment(s_buffer); // newline escapes + append all subsequent lines with '\' processNewlineEscapes(s_buffer, is_recipe); // store the real text line if (!s_buffer.empty()) v_s_recipe.push_back(s_buffer); s_buffer.clear(); } is_recipe.close(); return 0; } void RecipeReader::processNewlineEscapes(string &s_string, ifstream &is_stream) { string s_temp; size_t sz_index = s_string.find_first_of("\\"); while (sz_index <= s_string.length()) { if (getline(is_stream,s_temp)) { removeLeadingWhitespace(s_temp); processComment(s_temp); s_string = s_string.substr(0,sz_index-1) + " " + s_temp; } else cout << "Error: newline escape '\' found at EOF" << endl; sz_index = s_string.find_first_of("\\"); } } void RecipeReader::processComment(string &s_string) { size_t sz_index = s_string.find_first_of("#"); s_string = s_string.substr(0,sz_index); } void RecipeReader::removeLeadingWhitespace(string &s_string) { const size_t sz_length = s_string.size(); size_t sz_index = s_string.find_first_not_of(" \t"); if (sz_index <= sz_length) s_string = s_string.substr(sz_index); else if ((sz_index > sz_length) && (sz_length != 0)) // "empty" lines with only whitespace s_string.clear(); } Some extra info: the first s_buffer passed to the ifstream contains the filename, std::string s_buffer is a class data member, so is std::vector v_s_recipe. Any comment is welcome :)

    Read the article

  • JQuery Validation - Wrap offending field in a div.

    - by Samuurai
    Hi, It's my first time using StackOverFlow and first time trying to set up jQuery Validation. It's displaying <label> tags with the error messages as default behaviour, however the way my CSS is set up I need a div to wrap around the offending element and a message display in <p> tags. Without errors, my html looks like this: <div class="grid-26 append-2"> <p class="noMarginBottom"> <label>First Name</label> <div class="jNiceInputWrapper"> <div class="jNiceInputInner"> <input type="text" class="text jNiceInput" name="name"/> </div> </div> </p> <span class="clear"/> </div> And with Errors, it needs to look like this - Note the div with class "error" and the <p> tag. <div class="grid-26 append-2"> <div class="error"> <p>Please write your real name</p> <p class="noMarginBottom"> <label>First Name</label> <div class="jNiceInputWrapper"> <div class="jNiceInputInner"> <input type="text" class="text jNiceInput" name="name"/> </div> </div> </p> <span class="clear"/> </div> </div> My Validation code is very basic. $(document).ready(function(){ $("#contact_form").validate({ rules:{ name: { required: true } } }); }); This is my first venture into jQuery and form validation, so I'll be the first to say "I'm lost!" any help would be greatly appreciated. Thanks.

    Read the article

  • RoR custom routing/Method/View problem all methods come back as undefined

    - by Jeff
    I am playing with custom view and routes. I think that I have everything right but obviously not. Essentially I tried to copy the show method and show.html.erb but for some reason it will not work. My controller class fatherController < ApplicationController def show @father = Father.find(params[:id]) respond_to do |format| format.html # show.html.erb format.xml { render :xml => @father } end end def ofmine @father = Father.find(params[:id]) respond_to do |format| format.html # show.html.erb format.xml { render :xml => @father } end end end My routes.rb Parent::Application.routes.draw do resources :fathers do resources :kids end match 'hospitals/:id/ofmine' => 'father#show2' end when I go to 127.0.0.1:/father/1 it works fine but when I try to go to 127.0.0.1:/father/1/ofmine it gives the following error. It doesn't matter what the variable/method that is called; it occurs at the first one to be displayed. Both show.html.erb and show2.html.erb are the exact same files My Error from webserver commandline > Processing by fathersController#show2 > as HTML Parameters: {"id"=>"1"} > Rendered fathers/show2.html.erb within > layouts/application (31.6ms) Completed > in 37ms > > ActionView::Template::Error (undefined > method `name' for nil:NilClass): > 4: <td>Name</td><td></td> > 5: </tr> > 6: <tr> > 7: <td><%= @father.name %></td><td></td> > 8: </tr> > 9: <tr> > 10: <td>City</td><td>State</td> app/views/fathers/show2.html.erb:7:in > `_app_views_fatherss_show__html_erb___709193087__616989688_0' Error as displayed on actual page NoMethodError in Fathers#show2 Showing /var/ruby/chs/app/views/fathers/show2.html.erb where line #7 raised: undefined method `name' for nil:NilClass Extracted source (around line #7): 4: Name 5: 6: 7: <%= @father.name % 8: 9: 10: CityState If anyone could tell me what in the world I am doing wrong I would appreciate it greatly.

    Read the article

  • Finding open contiguous blocks of time for every day of a month, fast

    - by Chris
    I am working on a booking availability system for a group of several venues, and am having a hard time generating the availability of time blocks for days in a given month. This is happening server-side in PHP, but the concept itself is language agnostic -- I could be doing this in JS or anything else. Given a venue_id, month, and year (6/2012 for example), I have a list of all events occurring in that range at that venue, represented as unix timestamps start and end. This data comes from the database. I need to establish what, if any, contiguous block of time of a minimum length (different per venue) exist on each day. For example, on 6/1 I have an event between 2:00pm and 7:00pm. The minimum time is 5 hours, so there's a block open there from 9am - 2pm and another between 7pm and 12pm. This would continue for the 2nd, 3rd, etc... every day of June. Some (most) of the days have nothing happening at all, some have 1 - 3 events. The solution I came up with works, but it also takes waaaay too long to generate the data. Basically, I loop every day of the month and create an array of timestamps for each 15 minutes of that day. Then, I loop the time spans of events from that day by 15 minutes, marking any "taken" timeslot as false. Remaining, I have an array that contains timestamp of free time vs. taken time: //one day's array after processing through loops (not real timestamps) array( 12345678=>12345678, // <--- avail 12345878=>12345878, 12346078=>12346078, 12346278=>false, // <--- not avail 12346478=>false, 12346678=>false, 12346878=>false, 12347078=>12347078, // <--- avail 12347278=>12347278 ) Now I would need to loop THIS array to find continuous time blocks, then check to see if they are long enough (each venue has a minimum), and if so then establish the descriptive text for their start and end (i.e. 9am - 2pm). WHEW! By the time all this looping is done, the user has grown bored and wandered off to Youtube to watch videos of puppies; it takes ages to so examine 30 or so days. Is there a faster way to solve this issue? To summarize the problem, given time ranges t1 and t2 on day d, how can I determine the remaining time left in d that is longer than the minimum time block m. This data is assembled on demand via AJAX as the user moves between calendar months. Results are cached per-page-load, so if the user goes to July a second time, the data that was generated the first time would be reused. Any other details that would help, let me know. Edit Per request, the database structure (or the part that is relevant here) *events* id (bigint) title (varchar) *event_times* id (bigint) event_id (bigint) venue_id (bigint) start (bigint) end (bigint) *venues* id (bigint) name (varchar) min_block (int) min_start (varchar) max_start (varchar)

    Read the article

  • Can I take the voice data (f.e. in mp3 format) from speech recognition? [closed]

    - by Ersin Gulbahar
    Possible Duplicate: Android: Voice Recording and saving audio I mean ; I use voice recognition classes on android and I succeed voice recognition. But I want to real voice data not words instead of it. For example I said 'teacher' and android get you said teacher.Oh ok its good but I want to my voice which include 'teacher'.Where is it ? Can I take it and save another location? I use this class to speech to text : package net.viralpatel.android.speechtotextdemo; import java.util.ArrayList; import android.app.Activity; import android.content.ActivityNotFoundException; import android.content.Intent; import android.os.Bundle; import android.speech.RecognizerIntent; import android.view.Menu; import android.view.View; import android.widget.ImageButton; import android.widget.TextView; import android.widget.Toast; public class MainActivity extends Activity { protected static final int RESULT_SPEECH = 1; private ImageButton btnSpeak; private TextView txtText; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); txtText = (TextView) findViewById(R.id.txtText); btnSpeak = (ImageButton) findViewById(R.id.btnSpeak); btnSpeak.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { Intent intent = new Intent( RecognizerIntent.ACTION_RECOGNIZE_SPEECH); intent.putExtra(RecognizerIntent.EXTRA_LANGUAGE_MODEL, "en-US"); try { startActivityForResult(intent, RESULT_SPEECH); txtText.setText(""); } catch (ActivityNotFoundException a) { Toast t = Toast.makeText(getApplicationContext(), "Ops! Your device doesn't support Speech to Text", Toast.LENGTH_SHORT); t.show(); } } }); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.activity_main, menu); return true; } @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { super.onActivityResult(requestCode, resultCode, data); switch (requestCode) { case RESULT_SPEECH: { if (resultCode == RESULT_OK && null != data) { ArrayList<String> text = data .getStringArrayListExtra(RecognizerIntent.EXTRA_RESULTS); txtText.setText(text.get(0)); } break; } } } } Thanks.

    Read the article

  • How to reconcile my support of open-source software and need to feed and house myself?

    - by Guzba
    I have a bit of a dilemma and wanted to get some other developers' opinions on it and maybe some guidance. So I have created a 2D game for Android from the ground up, learning and re factoring as I went along. I did it for the experience, and have been proud of the results. I released it for free as ad supported with AdMob not really expecting much out of it, but curious to see what would happen. Its been a few of months now since release, and it has become very popular (250k downloads!). Additionally, the ad revenue is great and is driving me to make more good games and even allowing me to work less so that I can focus on my own works. When I originally began working on the game, I was pretty new to concurrency and completely new to Android (had Java experience though). The standard advice I got for starting an Android game was to look at the sample games from Google (Snake, Lunar Lander, ...) so I did. In my opinion, these Android sample games from Google are decent to see in general what your code should look like, but not actually all that great to follow. This is because some of their features don't work (saving game state), the concurrency is both unexplained and cumbersome (there is no real separation between the game thread and the UI thread since they sync lock each other out all the time and the UI thread runs game thread code). This made it difficult for me as a newbie to concurrency to understand how it was organized and what was really running what code. Here is my dilemma: After spending this past few months slowly improving my code, I feel that it could be very beneficial to developers who are in the same position that I was in when I started. (Since it is not a complex game, but clearly coded in my opinion.) I want to open up the source so that others can learn from it but don't want to lose my ad revenue stream, which, if I did open the source, I fear I would when people released versions with the ad stripped, or minor tweaks that would fragment my audience, etc. I am a CS undergrad major in college and this money is giving me the freedom to work less at summer job, thus giving me the time and will to work on more of my own projects and improving my own skills while still paying the bills. So what do I do? Open the source at personal sacrifice for the greater good, or keep it closed and be a sort of hypocritical supporter of open source?

    Read the article

  • Why is FF on OS X loosing jQuery-UI in click event handler?

    - by Jean-François Beauchamp
    In a web page using jQUery 1.7.1 and jQUery-UI 1.8.18, if I output $.ui in an alert box when the document is ready, I get [object Object]. However when using Firefox, if I output $.ui in a click event handler, I get 'undefined' as result. With other browsers (latest versions of IE, Chrome and Safari), the result is still [object Object] when clicking on the link. Here is my HTML Page: <!doctype html> <html> <head> <title></title> <script src="Scripts/jquery-1.7.1.js" type="text/javascript"></script> <script src="Scripts/jquery-ui-1.8.18.js" type="text/javascript"></script> <script type="text/javascript"> $(document).ready(function () { alert($.ui); // ALERT A $(document).on("click", ".dialogLink", function () { alert($.ui); // ALERT B return false; }); }); </script> </head> <body> <a href="#" class="dialogLink">Click me!</a> </body> </html> In this post, I reduced to its simplest form another problem I was having described here: $(this).dialog is not a function. I created a new post for the sake of clarity, since the real question is different from the original one now that pin-pointed where the problem resided. UPDATE: IF I replace my alerts with simply alert($); I get this result for alert A: function (selector, context) { return new jQuery.fn.init(selector, context, rootjQuery); } and this one for alert B: function (a, b) { return new d.fn.init(a, b, g); } This does not make sense to me, although I may not be understanding well enough what $ is... UPDATE 2: I can only reproduce this problem using Firefox on OS X. On Firefox running on Windows 7, everything is fine.

    Read the article

  • C# Type Casting at Runtimefor Array.SetValue

    - by sprocketonline
    I'm trying to create an array using reflection, and insert values into it. I'm trying to do this for many different types so would like a createAndFillArray function capable of this : Type t1 = typeof(A); Type t2 = typeof(B); double exampleA = 22.5; int exampleB = 43; Array arrA = createAndFillArray(t1, exampleA); Array arrB = createAndFillArray(t2, exampleB); private Array createAndFillArray(Type t, object val){ Array arr = Array.CreateInstance( t, 1); //length 1 in this example only, real-world is of variable length. arr.SetValue( val, 0 ); //this causes the following error: "System.InvalidCastException : Object cannot be stored in an array of this type." return arr; } with the class A being as follows: public class A{ public A(){} private double val; public double Value{ get{ return val; } set{ this.val = value; } } public static implicit operator A(double d){ A a = new A(); a.Value = d; return a; } } and class B being very similar, but with int: public class B{ public B(){} private double val; public double Value{ get{ return val; } set{ this.val = value; } } public static implicit operator B(double d){ B b = new B(); b.Value = d; return b; } } I hoped that the implicit operator would have ensured that the double be converted to class A, or the int to class B, and the error avoided; but this is obviously not so. The above is used in a custom deserialization class, which takes data from a custom data format and fills in the corresponding .Net object properties. I'm doing this via reflection and at runtime, so I think both are unavoidable. I'm targeting the C# 2.0 framework. I've dozens, if not hundreds, of classes similar to A and B, so would prefer to find a solution which improved on the createAndFillArray method rather than a solution which altered these classes.

    Read the article

  • True / false evaluation doesn't work as expected in Scheme

    - by ron
    I'm trying to compare two booleans : (if (equal? #f (string->number "123b")) "not a number" "indeed a number") When I run this in the command line of DrRacket I get "not a number" , however , when I put that piece of code in my larger code , the function doesn't return that string ("not a number") , here's the code : (define (testing x y z) (define badInput "ERROR") (if (equal? #f (string->number "123b")) "not a number" "indeed a number") (display x)) And from command line : (testing "123" 1 2) displays : 123 Why ? Furthermore , how can I return a value , whenever I choose ? Here is my "real" problem : I want to do some input check to the input of the user , but the thing is , that I want to return the error message if I need , before the code is executed , because if won't - then I would run the algorithm of my code for some incorrect input : (define (convert originalNumber s_oldBase s_newBase) (define badInput "ERROR") ; Input check - if one of the inputs is not a number then return ERROR (if (equal? #f (string->number originalNumber)) badInput) (if (equal? #f (string->number s_oldBase)) badInput) (if (equal? #f (string->number s_newBase)) badInput) (define oldBase (string->number s_oldBase)) (define newBase (string->number s_newBase)) (define outDecimal (convertIntoDecimal originalNumber oldBase)) (define result "") ; holds the new number (define remainder 0) ; remainder for each iteration (define whole 0) ; the whole number after dividing (define temp 0) (do() ((= outDecimal 0)) ; stop when the decimal value reaches 0 (set! whole (quotient outDecimal newBase)) ; calc the whole number (set! temp (* whole newBase)) (set! remainder (- outDecimal temp)) ; calc the remainder (set! result (appending result remainder)) ; append the result (set! outDecimal (+ whole 0)) ; set outDecimal = whole ) ; end of do (if (> 1 0) (string->number (list->string(reverse (string->list result))))) ) ;end of method This code won't work since it uses another method that I didn't attach to the post (but it's irrelevant to the problem . Please take a look at those three IF-s ... I want to return "ERROR" if the user put some incorrect value , for example (convert "23asb4" "b5" "9") Thanks

    Read the article

  • How to approach copying objects with smart pointers as class attributes?

    - by tomislav-maric
    From the boost library documentation I read this: Conceptually, smart pointers are seen as owning the object pointed to, and thus responsible for deletion of the object when it is no longer needed. I have a very simple problem: I want to use RAII for pointer attributes of a class that is Copyable and Assignable. The copy and assignment operations should be deep: every object should have its own copy of the actual data. Also, RTTI needs to be available for the attributes (their type may also be determined at runtime). Should I be searching for an implementation of a Copyable smart pointer (the data are small, so I don't need Copy on Write pointers), or do I delegate the copy operation to the copy constructors of my objects as shown in this answer? Which smart pointer do I choose for simple RAII of a class that is copyable and assignable? (I'm thinking that the unique_ptr with delegated copy/assignment operations to the class copy constructor and assignment operator would make a proper choice, but I am not sure) Here's a pseudocode for the problem using raw pointers, it's just a problem description, not a running C++ code: // Operation interface class ModelOperation { public: virtual void operate = (); }; // Implementation of an operation called Special class SpecialModelOperation : public ModelOperation { private: // Private attributes are present here in a real implementation. public: // Implement operation void operate () {}; }; // All operations conform to ModelOperation interface // These are possible operation names: // class MoreSpecialOperation; // class DifferentOperation; // Concrete model with different operations class MyModel { private: ModelOperation* firstOperation_; ModelOperation* secondOperation_; public: MyModel() : firstOperation_(0), secondOperation_(0) { // Forgetting about run-time type definition from input files here. firstOperation_ = new MoreSpecialOperation(); secondOperation_ = new DifferentOperation(); } void operate() { firstOperation_->operate(); secondOperation_->operate(); } ~MyModel() { delete firstOperation_; firstOperation_ = 0; delete secondOperation_; secondOperation_ = 0; } }; int main() { MyModel modelOne; // Some internal scope { // I want modelTwo to have its own set of copied, not referenced // operations, and at the same time I need RAII to work for it, // as soon as it goes out of scope. MyModel modelTwo (modelOne); } return 0; }

    Read the article

  • What do I need to distribute (keys, certs) for Python w/ SSL-socket connection?

    - by fandingo
    I'm trying to write a generic server-client application that will be able to exchange data amongst servers. I've read over quite a few OpenSSL documents, and I have successfully setup my own CA and created a cert (and private key) for testing purposes. I'm stuck with Python 2.3, so I can't use the standard "ssl" library. Instead, I'm stuck with PyOpenSSL, which doesn't seem bad, but there aren't many documents out there about it. My question isn't really about getting it working. I'm more confused about the certificates and where they need to go. Here are my two programs that do work: Server: #!/bin/env python from OpenSSL import SSL import socket import pickle def verify_cb(conn, cert, errnum, depth, ok): print('Got cert: %s' % cert.get_subject()) return ok ctx = SSL.Context(SSL.TLSv1_METHOD) ctx.set_verify(SSL.VERIFY_PEER|SSL.VERIFY_FAIL_IF_NO_PEER_CERT, verify_cb) # ?????? ctx.use_privatekey_file('./Dmgr-key.pem') ctx.use_certificate_file('Dmgr-cert.pem') # ?????? ctx.load_verify_locations('./CAcert.pem') server = SSL.Connection(ctx, socket.socket(socket.AF_INET, socket.SOCK_STREAM)) server.bind(('', 50000)) server.listen(3) a, b = server.accept() c = a.recv(1024) print(c) Client: from OpenSSL import SSL import socket import pickle def verify_cb(conn, cert, errnum, depth, ok): print('Got cert: %s' % cert.get_subject()) return ok ctx = SSL.Context(SSL.TLSv1_METHOD) ctx.set_verify(SSL.VERIFY_PEER, verify_cb) # ?????????? ctx.use_privatekey_file('/home/justin/code/work/CA/private/Dmgr-key.pem') ctx.use_certificate_file('/home/justin/code/work/CA/Dmgr-cert.pem') # ????????? ctx.load_verify_locations('/home/justin/code/work/CA/CAcert.pem') sock = SSL.Connection(ctx, socket.socket(socket.AF_INET, socket.SOCK_STREAM)) sock.connect(('10.0.0.3', 50000)) a = Tester(2, 2) b = pickle.dumps(a) sock.send("Hello, world") sock.flush() sock.send(b) sock.shutdown() sock.close() I found this information from ftp://ftp.pbone.net/mirror/ftp.pld-linux.org/dists/2.0/PLD/i586/PLD/RPMS/python-pyOpenSSL-examples-0.6-2.i586.rpm which contains some example scripts. As you might gather, I don't fully understand the sections between the " # ????????." I don't get why the certificate and private key are needed on both the client and server. I'm not sure where each should go, but shouldn't I only need to distribute one part of the key (probably the public part)? It undermines the purpose of having asymmetric keys if you still need both on each server, right? I tried alternating removing either the pkey or cert on either box, and I get the following error no matter which I remove: OpenSSL.SSL.Error: [('SSL routines', 'SSL3_READ_BYTES', 'sslv3 alert handshake failure'), ('SSL routines', 'SSL3_WRITE_BYTES', 'ssl handshake failure')] Could someone explain if this is the expected behavior for SSL. Do I really need to distribute the private key and public cert to all my clients? I'm trying to avoid any huge security problems, and leaking private keys would tend to be a big one... Thanks for the help!

    Read the article

  • BlackBerry OS 7.1 secured TLS connection is closed after very short time

    - by MrVincenzo
    To make a long story short: Same client-server configuration, same network topology, same device (Bold 9900) - works perfectly well on OS 7.0 but doesn't work as expected on OS 7.1 and the secured tls connection is being closed by the server after a very short time. My application opens a secured tls connection to a server. The connection is kept alive by a application layer keep-alive mechanism and remains open until the client closes it. Attached is a simplified version of the actual code that opens connection and reads from the socket. The code works perfectly on OS 5.0-7.0 but doesn't work as expected on OS 7.1. When running on OS 7.1, the blocking read() returns with -1 (end of the stream has been reached) after very short time (10-45 seconds). For OS 5.0-7.0 the call to read() remains blocking until next data arrives and the connection is never closed by the server. Connection connection = Connector.open(connectionString); connInputStream = connection.openInputStream(); while (true) { try { retVal = connInputStream.read(); if (-1 == retVal) { break; // end of stream has been reached } } catch (Exception e ) { // do error handling } // data read from stream is handled here } UPDATE 1: Apparently, the problem appears only when I use secured tls connection (either using mobile network or WiFi) on OS 7.1. Everything works as expected when opening a non secured connection on OS 7.1. For tls on mobile networks I use the following connection string: connectionString = "tls://someipaddress:443;deviceside=false;ConnectionType=mds-public;EndToEndDesired"; For tls on Wifi I use the following connection string: connectionString = "tls://someipaddress:443;deviceside=true;interface=wifi;EndToEndRequired" UPDATE 2: The connection is never idle. I am constantly receiving and sending data on it. The issue appears both when using mobile connection and WiFi. The issue appears both on real OS 7.1 devices and simulators. I am starting to suspect that it is somehow related either to the connection string I am using or to the tls handshake. UPDATE 3: According to Wireshark's captures that I made with the OS 7.1 simulator, the secured tls connection is being closed by the server (client receives FIN). For the moment I don't have the server's private key therefore I unable to debug the tls handshake.

    Read the article

  • Between-request Garbage Collection using Passenger

    - by raphaelcm
    We're using Rails 3.0.7 and REE 1.8.7. Long-term, we will be upgrading, but at the moment it's not feasible. Following the advice of several blog posts, we've been tuning our GC, and have settings that work pretty well. But we would really like to run GC outside of the request-response cycle. I've tried patching Passenger per this post, and using the code supplied in this SO question. In both cases, GC does indeed happen between requests. However, every time the between-request GC happens, I see a bunch of this: MONGODB [INFO] Connecting... MONGODB admin['$cmd'].find({:ismaster=>1}).limit(-1) MONGODB admin['$cmd'].find({:ismaster=>1}).limit(-1) MONGODB admin['$cmd'].find({:ismaster=>1}).limit(-1) Starting the New Relic Agent. Installed New Relic Browser Monitoring middleware SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`scoping` = 'pages' AND `refinery_settings`.`name` = 'use_marketable_urls' LIMIT 1 SQL (0.0ms) BEGIN RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`id` = 1 LIMIT 1 AREL (0.0ms) UPDATE `refinery_settings` SET `value` = '--- \"false\"\n', `callback_proc_as_string` = NULL WHERE `refinery_settings`.`id` = 1 SQL (0.0ms) SHOW TABLES RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` SQL (0.0ms) COMMIT SQL (0.0ms) SHOW TABLES RefinerySetting Load (4.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`scoping` IS NULL AND `refinery_settings`.`name` = 'user_image_sizes' LIMIT 1 SQL (0.0ms) BEGIN RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` WHERE `refinery_settings`.`id` = 17 LIMIT 1 AREL (0.0ms) UPDATE `refinery_settings` SET `value` = '--- \n:small: 120x120>\n:medium: 280x280>\n:large: 580x580>\n', `callback_proc_as_string` = NULL WHERE `refinery_settings`.`id` = 17 SQL (0.0ms) SHOW TABLES RefinerySetting Load (0.0ms) SELECT `refinery_settings`.* FROM `refinery_settings` SQL (0.0ms) COMMIT ******** Engine Extend: app/helpers/blog_posts_helper SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (4.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES ******** Engine Extend: app/models/user SQL (0.0ms) describe `roles_users` SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (4.0ms) describe `roles_users` SQL (0.0ms) SHOW TABLES SQL (4.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES SQL (0.0ms) SHOW TABLES (etc, etc, etc) Which is what happens when rails "loads the world" when the app starts up. Basically, GC.start is re-loading the app for some reason. Because of this, between-request GC is much slower than inline GC. Is there a way around this? I would love to have snappy, between-request GC if possible. Thanks.

    Read the article

  • Technical non-terminating condition in a loop

    - by Snarfblam
    Most of us know that a loop should not have a non-terminating condition. For example, this C# loop has a non-terminating condition: any even value of i. This is an obvious logic error. void CountByTwosStartingAt(byte i) { // If i is even, it never exceeds 254 for(; i < 255; i += 2) { Console.WriteLine(i); } } Sometimes there are edge cases that are extremely unlikeley, but technically constitute non-exiting conditions (stack overflows and out-of-memory errors aside). Suppose you have a function that counts the number of sequential zeros in a stream: int CountZeros(Stream s) { int total = 0; while(s.ReadByte() == 0) total++; return total; } Now, suppose you feed it this thing: class InfiniteEmptyStream:Stream { // ... Other members ... public override int Read(byte[] buffer, int offset, int count) { Array.Clear(buffer, offset, count); // Output zeros return count; // Never returns -1 (end of stream) } } Or more realistically, maybe a stream that returns data from external hardware, which in certain cases might return lots of zeros (such as a game controller sitting on your desk). Either way we have an infinite loop. This particular non-terminating condition stands out, but sometimes they don't. A completely real-world example as in an app I'm writing. An endless stream of zeros will be deserialized into infinite "empty" objects (until the collection class or GC throws an exception because I've exceeded two billion items). But this would be a completely unexpected circumstance (considering my data source). How important is it to have absolutely no non-terminating conditions? How much does this affect "robustness?" Does it matter if they are only "theoretically" non-terminating (is it okay if an exception represents an implicit terminating condition)? Does it matter whether the app is commercial? If it is publicly distributed? Does it matter if the problematic code is in no way accessible through a public interface/API? Edit: One of the primary concerns I have is unforseen logic errors that can create the non-terminating condition. If, as a rule, you ensure there are no non-terminating conditions, you can identify or handle these logic errors more gracefully, but is it worth it? And when? This is a concern orthogonal to trust.

    Read the article

  • How do I make a GUI that behaves like this?

    - by Karl Knechtel
    This is difficult to explain without illustration, so - behold, an illustration, cobbled together from screenshots of a few hello-world examples and a lot of Paint work: I have started out using Windows Forms on .NET (via IronPython, but that shouldn't be important), and haven't been able to figure out very much. GUI libraries in general are very intimidating, simply because every class has so many possible attributes. Documentation is good at explaining what everything does, but not so good at helping you figure out what you need. I will be assembling the GUI dynamically, but I'm not expecting that to be the hard part. The sticking points for me right now are: How do I get text labels to size themselves automatically to the width of the contained text (so that the text doesn't clip, and I also don't reserve unnecessary space for them when resizing the window)? How do I make the vertical scrollbar always appear? Setting the VScroll property (why is this protected when AutoScroll is public, BTW?) doesn't seem to do anything. How come the horizontal scrollbar is not added by AutoScroll when contents are laid out vertically (via Dock = DockStyle.Top)? I can use a minimum size for panels to prevent the label and corresponding control from overlapping when the window is shrunk horizontally, but then the scrollbar doesn't appear and the control is inaccessible. How can I put limits on window resizing (e.g. set a minimum width) without disabling it completely? (Just set minimum/maximum sizes for the Form?) Related to that, is there any way to set minimum/maximum widths or heights without setting a minimum/maximum size (i.e. can I constrain the size in only one dimension)? Is there a built-in control suitable for hex editing or am I going to have to build something myself? ... And should I be using something else (perhaps something more capable?) I've heard WPF mentioned, but I understand that this involves XML and I really want to build a GUI from XML - I already have data in an object graph, and doing some kind of weird XML pseudo-serialization (in Python, no less!) in order to create a GUI seems incredibly roundabout.

    Read the article

  • Bug in Safari: options.length = 0; not working as expected in Safari 4

    - by Stefan
    This is not a real question, but rather an answer to save some others the hassle of tracking this nasty bug down. I wasted hours finding this out. When using options.length = 0; to reset all options of a select element in safari, you can get mixed results depending on wether you have the Web Inspector open or not. If the web inspector is open you use myElement.options.length = 0; and after that query the options.length(), you might get back 1 instead of 0 (expected) but only if the Web Inspector is open (which is often the case when debugging problem like this). Workaround: Close the Web Inspector or call myElement.options.length = 0; twice like so: myElement.options.length = 0; myElement.options.length = 0; Testcase: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <title>Testcase</title> <script type="text/javascript" language="javascript" charset="utf-8"> function test(el){ var el = document.getElementById("sel"); alert("Before calling options.length=" + el.options.length); el.options.length = 0; alert("After calling options.length=" + el.options.length); } </script> </head> <body onLoad="test();"> <p> Make note of the numbers displayed in the Alert Dialog, then open Web inspector, reload this page and compare the numbers. </p> <select id="sel" multiple> <option label="a----------" value="a"></option> <option label="b----------" value="b"></option> <option label="c----------" value="c"></option> </select> </body> </html>

    Read the article

  • Database Schema Versioning Strategies

    - by Jack Ryan
    I work on a project that uses a reasonably large database, the live version weighing in at somewhere around 60-80GB. The live database is the only real definitive source of our schema, and because of its size duplicating this database is too slow to be done often. This means we have ended up developing our database schema in a pretty ad hoc way, using sql compare to migrate changes from dev dbs to the live system, and only wiping our dev dbs every month or two. I am hoping to get some pointers on how to improve our database development work flow so that we have a little more control. Some things to think about: Currently nobody is really in charge of the database schema, all developers can change it if they need to, though generally these decisions are talked about before they are done. There are stored procedures, functions, and views in the database. These should probably be dumped to files so they can be reloaded on every build. Schema changes should probably be checked in as scripts. We have started to do this recently. However all our scripts must then be numbered (because there may be dependencies between them), and must be re runnable (because our build script currently runs them all in order). This makes them hard to read because they are full of conditionals that check whether tables or columns already exist. This is a step that is often forgotten by developers. Getting a new database should be quick and easy. This is currently a big problem, it takes several hours to get a copy of last nights backup and restore it onto a dev machine. Some mechanism needs to be in place to allow developers to update static data. We have tables that contain data that is never updated through the application, but does potentially need to be changed when we do a new release (often this drives dropdowns). The whole thing needs to be runnable as part of a build script. Are there any tools that can be used to help to do this? Eventually I would like to be at a point where a new DB can be built from scratch without copying any data from the live system. I don't mind writing some scripts to glue all the steps together but each part should be easily editable so that we continue to use it rather than make changes directly on DBs.

    Read the article

< Previous Page | 679 680 681 682 683 684 685 686 687 688 689 690  | Next Page >